Merge branch 'next/timer' of git://git.linaro.org/people/arnd/arm-soc

* 'next/timer' of git://git.linaro.org/people/arnd/arm-soc:
  clocksource: fixup ux500 build problems
  ARM: omap: use __devexit_p in dmtimer driver
  ARM: ux500: Reprogram timers upon resume
  ARM: plat-nomadik: timer: Export reset functions
  ARM: plat-nomadik: timer: Add support for periodic timers
  ARM: ux500: Move timer code to separate file
  ARM: ux500: add support for clocksource DBX500 PRCMU
  clocksource: add DBX500 PRCMU Timer support
  ARM: plat-nomadik: MTU sched_clock as an option
  ARM: OMAP: dmtimer: add error handling to export APIs
  ARM: OMAP: dmtimer: low-power mode support
  ARM: OMAP: dmtimer: skip reserved timers
  ARM: OMAP: dmtimer: pm_runtime support
  ARM: OMAP: dmtimer: switch-over to platform device driver
  ARM: OMAP: dmtimer: platform driver
  ARM: OMAP2+: dmtimer: convert to platform devices
  ARM: OMAP1: dmtimer: conversion to platform devices
  ARM: OMAP2+: dmtimer: add device names to flck nodes
  ARM: OMAP: Add support for dmtimer v2 ip

3 files changed, 116 insertions, 77 deletions

diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig
index ce659015535e..bca4914b4b9d 100644
--- a/arch/arm/plat-nomadik/Kconfig
+++ b/arch/arm/plat-nomadik/Kconfig
@@ -15,10 +15,16 @@ if PLAT_NOMADIK
 
 config HAS_MTU
 	bool
-	select HAVE_SCHED_CLOCK
 	help
 	  Support for Multi Timer Unit. MTU provides access
 	  to multiple interrupt generating programmable
 	  32-bit free running decrementing counters.
 
+config NOMADIK_MTU_SCHED_CLOCK
+	bool
+	depends on HAS_MTU
+	select HAVE_SCHED_CLOCK
+	help
+	  Use the Multi Timer Unit as the sched_clock.
+
 endif
diff --git a/arch/arm/plat-nomadik/include/plat/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h
index 65704a3d4241..6508e7694a4b 100644
--- a/arch/arm/plat-nomadik/include/plat/mtu.h
+++ b/arch/arm/plat-nomadik/include/plat/mtu.h
@@ -1,54 +1,11 @@
 #ifndef __PLAT_MTU_H
 #define __PLAT_MTU_H
 
-/*
- * Guaranteed runtime conversion range in seconds for
- * the clocksource and clockevent.
- */
-#define MTU_MIN_RANGE 4
-
 /* should be set by the platform code */
 extern void __iomem *mtu_base;
 
-/*
- * The MTU device hosts four different counters, with 4 set of
- * registers. These are register names.
- */
-
-#define MTU_IMSC	0x00	/* Interrupt mask set/clear */
-#define MTU_RIS		0x04	/* Raw interrupt status */
-#define MTU_MIS		0x08	/* Masked interrupt status */
-#define MTU_ICR		0x0C	/* Interrupt clear register */
-
-/* per-timer registers take 0..3 as argument */
-#define MTU_LR(x)	(0x10 + 0x10 * (x) + 0x00)	/* Load value */
-#define MTU_VAL(x)	(0x10 + 0x10 * (x) + 0x04)	/* Current value */
-#define MTU_CR(x)	(0x10 + 0x10 * (x) + 0x08)	/* Control reg */
-#define MTU_BGLR(x)	(0x10 + 0x10 * (x) + 0x0c)	/* At next overflow */
-
-/* bits for the control register */
-#define MTU_CRn_ENA		0x80
-#define MTU_CRn_PERIODIC	0x40	/* if 0 = free-running */
-#define MTU_CRn_PRESCALE_MASK	0x0c
-#define MTU_CRn_PRESCALE_1		0x00
-#define MTU_CRn_PRESCALE_16		0x04
-#define MTU_CRn_PRESCALE_256		0x08
-#define MTU_CRn_32BITS		0x02
-#define MTU_CRn_ONESHOT		0x01	/* if 0 = wraps reloading from BGLR*/
-
-/* Other registers are usual amba/primecell registers, currently not used */
-#define MTU_ITCR	0xff0
-#define MTU_ITOP	0xff4
-
-#define MTU_PERIPH_ID0	0xfe0
-#define MTU_PERIPH_ID1	0xfe4
-#define MTU_PERIPH_ID2	0xfe8
-#define MTU_PERIPH_ID3	0xfeC
-
-#define MTU_PCELL0	0xff0
-#define MTU_PCELL1	0xff4
-#define MTU_PCELL2	0xff8
-#define MTU_PCELL3	0xffC
+void nmdk_clkevt_reset(void);
+void nmdk_clksrc_reset(void);
 
 #endif /* __PLAT_MTU_H */
 
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index ef74e157a9d5..30b6433d910d 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -21,10 +21,59 @@
 #include <asm/mach/time.h>
 #include <asm/sched_clock.h>
 
-#include <plat/mtu.h>
+/*
+ * Guaranteed runtime conversion range in seconds for
+ * the clocksource and clockevent.
+ */
+#define MTU_MIN_RANGE 4
+
+/*
+ * The MTU device hosts four different counters, with 4 set of
+ * registers. These are register names.
+ */
+
+#define MTU_IMSC	0x00	/* Interrupt mask set/clear */
+#define MTU_RIS		0x04	/* Raw interrupt status */
+#define MTU_MIS		0x08	/* Masked interrupt status */
+#define MTU_ICR		0x0C	/* Interrupt clear register */
+
+/* per-timer registers take 0..3 as argument */
+#define MTU_LR(x)	(0x10 + 0x10 * (x) + 0x00)	/* Load value */
+#define MTU_VAL(x)	(0x10 + 0x10 * (x) + 0x04)	/* Current value */
+#define MTU_CR(x)	(0x10 + 0x10 * (x) + 0x08)	/* Control reg */
+#define MTU_BGLR(x)	(0x10 + 0x10 * (x) + 0x0c)	/* At next overflow */
+
+/* bits for the control register */
+#define MTU_CRn_ENA		0x80
+#define MTU_CRn_PERIODIC	0x40	/* if 0 = free-running */
+#define MTU_CRn_PRESCALE_MASK	0x0c
+#define MTU_CRn_PRESCALE_1		0x00
+#define MTU_CRn_PRESCALE_16		0x04
+#define MTU_CRn_PRESCALE_256		0x08
+#define MTU_CRn_32BITS		0x02
+#define MTU_CRn_ONESHOT		0x01	/* if 0 = wraps reloading from BGLR*/
+
+/* Other registers are usual amba/primecell registers, currently not used */
+#define MTU_ITCR	0xff0
+#define MTU_ITOP	0xff4
+
+#define MTU_PERIPH_ID0	0xfe0
+#define MTU_PERIPH_ID1	0xfe4
+#define MTU_PERIPH_ID2	0xfe8
+#define MTU_PERIPH_ID3	0xfeC
+
+#define MTU_PCELL0	0xff0
+#define MTU_PCELL1	0xff4
+#define MTU_PCELL2	0xff8
+#define MTU_PCELL3	0xffC
+
+static bool clkevt_periodic;
+static u32 clk_prescale;
+static u32 nmdk_cycle;		/* write-once */
 
 void __iomem *mtu_base; /* Assigned by machine code */
 
+#ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK
 /*
  * Override the global weak sched_clock symbol with this
  * local implementation which uses the clocksource to get some
@@ -48,32 +97,56 @@ static void notrace nomadik_update_sched_clock(void)
 	u32 cyc = -readl(mtu_base + MTU_VAL(0));
 	update_sched_clock(&cd, cyc, (u32)~0);
 }
+#endif
 
 /* Clockevent device: use one-shot mode */
+static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev)
+{
+	writel(1 << 1, mtu_base + MTU_IMSC);
+	writel(evt, mtu_base + MTU_LR(1));
+	/* Load highest value, enable device, enable interrupts */
+	writel(MTU_CRn_ONESHOT | clk_prescale |
+	       MTU_CRn_32BITS | MTU_CRn_ENA,
+	       mtu_base + MTU_CR(1));
+
+	return 0;
+}
+
+void nmdk_clkevt_reset(void)
+{
+	if (clkevt_periodic) {
+
+		/* Timer: configure load and background-load, and fire it up */
+		writel(nmdk_cycle, mtu_base + MTU_LR(1));
+		writel(nmdk_cycle, mtu_base + MTU_BGLR(1));
+
+		writel(MTU_CRn_PERIODIC | clk_prescale |
+		       MTU_CRn_32BITS | MTU_CRn_ENA,
+		       mtu_base + MTU_CR(1));
+		writel(1 << 1, mtu_base + MTU_IMSC);
+	} else {
+		/* Generate an interrupt to start the clockevent again */
+		(void) nmdk_clkevt_next(nmdk_cycle, NULL);
+	}
+}
+
 static void nmdk_clkevt_mode(enum clock_event_mode mode,
 			     struct clock_event_device *dev)
 {
-	u32 cr;
 
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		pr_err("%s: periodic mode not supported\n", __func__);
+		clkevt_periodic = true;
+		nmdk_clkevt_reset();
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
-		/* Load highest value, enable device, enable interrupts */
-		cr = readl(mtu_base + MTU_CR(1));
-		writel(0, mtu_base + MTU_LR(1));
-		writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1));
-		writel(1 << 1, mtu_base + MTU_IMSC);
+		clkevt_periodic = false;
 		break;
 	case CLOCK_EVT_MODE_SHUTDOWN:
 	case CLOCK_EVT_MODE_UNUSED:
-		/* disable irq */
 		writel(0, mtu_base + MTU_IMSC);
 		/* disable timer */
-		cr = readl(mtu_base + MTU_CR(1));
-		cr &= ~MTU_CRn_ENA;
-		writel(cr, mtu_base + MTU_CR(1));
+		writel(0, mtu_base + MTU_CR(1));
 		/* load some high default value */
 		writel(0xffffffff, mtu_base + MTU_LR(1));
 		break;
@@ -82,16 +155,9 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode,
 	}
 }
 
-static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev)
-{
-	/* writing the value has immediate effect */
-	writel(evt, mtu_base + MTU_LR(1));
-	return 0;
-}
-
 static struct clock_event_device nmdk_clkevt = {
 	.name		= "mtu_1",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
 	.rating		= 200,
 	.set_mode	= nmdk_clkevt_mode,
 	.set_next_event	= nmdk_clkevt_next,
@@ -116,11 +182,23 @@ static struct irqaction nmdk_timer_irq = {
 	.dev_id		= &nmdk_clkevt,
 };
 
+void nmdk_clksrc_reset(void)
+{
+	/* Disable */
+	writel(0, mtu_base + MTU_CR(0));
+
+	/* ClockSource: configure load and background-load, and fire it up */
+	writel(nmdk_cycle, mtu_base + MTU_LR(0));
+	writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
+
+	writel(clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA,
+	       mtu_base + MTU_CR(0));
+}
+
 void __init nmdk_timer_init(void)
 {
 	unsigned long rate;
 	struct clk *clk0;
-	u32 cr = MTU_CRn_32BITS;
 
 	clk0 = clk_get_sys("mtu0", NULL);
 	BUG_ON(IS_ERR(clk0));
@@ -138,30 +216,28 @@ void __init nmdk_timer_init(void)
 	rate = clk_get_rate(clk0);
 	if (rate > 32000000) {
 		rate /= 16;
-		cr |= MTU_CRn_PRESCALE_16;
+		clk_prescale = MTU_CRn_PRESCALE_16;
 	} else {
-		cr |= MTU_CRn_PRESCALE_1;
+		clk_prescale = MTU_CRn_PRESCALE_1;
 	}
 
+	nmdk_cycle = (rate + HZ/2) / HZ;
+
+
 	/* Timer 0 is the free running clocksource */
-	writel(cr, mtu_base + MTU_CR(0));
-	writel(0, mtu_base + MTU_LR(0));
-	writel(0, mtu_base + MTU_BGLR(0));
-	writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
+	nmdk_clksrc_reset();
 
 	if (clocksource_mmio_init(mtu_base + MTU_VAL(0), "mtu_0",
 			rate, 200, 32, clocksource_mmio_readl_down))
 		pr_err("timer: failed to initialize clock source %s\n",
 		       "mtu_0");
-
+#ifdef CONFIG_NOMADIK_MTU_SCHED_CLOCK
 	init_sched_clock(&cd, nomadik_update_sched_clock, 32, rate);
-
+#endif
 	/* Timer 1 is used for events */
 
 	clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
 
-	writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */
-
 	nmdk_clkevt.max_delta_ns =
 		clockevent_delta2ns(0xffffffff, &nmdk_clkevt);
 	nmdk_clkevt.min_delta_ns =