summaryrefslogtreecommitdiff
path: root/arch/arm/plat-omap/include/plat
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2011-01-06 19:13:58 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2011-01-06 19:13:58 -0800
commit01539ba2a706ab7d35fc0667dff919ade7f87d63 (patch)
tree5a4bd0cf78007d06690fe4ac06bbd49a5a70bc47 /arch/arm/plat-omap/include/plat
parent9e9bc9736756f25d6c47b4eba0ebf25b20a6f153 (diff)
parentdc69d1af9e8d9cbbabff88bb35a6782187a22229 (diff)
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (243 commits) omap2: Make OMAP2PLUS select OMAP_DM_TIMER OMAP4: hwmod data: Fix alignment and end of line in structurefields OMAP4: hwmod data: Move the DMA structures OMAP4: hwmod data: Move the smartreflex structures OMAP4: hwmod data: Fix missing SIDLE_SMART_WKUP in smartreflexsysc arm: omap: tusb6010: add name for MUSB IRQ arm: omap: craneboard: Add USB EHCI support omap2+: Initialize serial port for dynamic remuxing for n8x0 omap2+: Add struct omap_board_data and use it for platform level serial init omap2+: Allow hwmod state changes to mux pads based on the state changes omap2+: Add support for hwmod specific muxing of devices omap2+: Add omap_mux_get_by_name OMAP2: PM: fix compile error when !CONFIG_SUSPEND MAINTAINERS: OMAP: hwmod: update hwmod code, data maintainership OMAP4: Smartreflex framework extensions OMAP4: hwmod: Add inital data for smartreflex modules. OMAP4: PM: Program correct init voltages for scalable VDDs OMAP4: Adding voltage driver support OMAP4: Register voltage PMIC parameters with the voltage layer OMAP3: PM: Program correct init voltages for VDD1 and VDD2 ... Fix up trivial conflict in arch/arm/plat-omap/Kconfig
Diffstat (limited to 'arch/arm/plat-omap/include/plat')
-rw-r--r--arch/arm/plat-omap/include/plat/clkdev_omap.h20
-rw-r--r--arch/arm/plat-omap/include/plat/clock.h16
-rw-r--r--arch/arm/plat-omap/include/plat/clockdomain.h141
-rw-r--r--arch/arm/plat-omap/include/plat/common.h2
-rw-r--r--arch/arm/plat-omap/include/plat/dma.h232
-rw-r--r--arch/arm/plat-omap/include/plat/fpga.h4
-rw-r--r--arch/arm/plat-omap/include/plat/gpio.h48
-rw-r--r--arch/arm/plat-omap/include/plat/gpmc.h9
-rw-r--r--arch/arm/plat-omap/include/plat/i2c.h13
-rw-r--r--arch/arm/plat-omap/include/plat/io.h5
-rw-r--r--arch/arm/plat-omap/include/plat/iommu.h5
-rw-r--r--arch/arm/plat-omap/include/plat/irqs.h2
-rw-r--r--arch/arm/plat-omap/include/plat/keypad.h35
-rw-r--r--arch/arm/plat-omap/include/plat/l4_3xxx.h24
-rw-r--r--arch/arm/plat-omap/include/plat/mailbox.h8
-rw-r--r--arch/arm/plat-omap/include/plat/omap-pm.h39
-rw-r--r--arch/arm/plat-omap/include/plat/omap-serial.h14
-rw-r--r--arch/arm/plat-omap/include/plat/omap_device.h1
-rw-r--r--arch/arm/plat-omap/include/plat/omap_hwmod.h73
-rw-r--r--arch/arm/plat-omap/include/plat/powerdomain.h167
-rw-r--r--arch/arm/plat-omap/include/plat/prcm.h20
-rw-r--r--arch/arm/plat-omap/include/plat/serial.h5
-rw-r--r--arch/arm/plat-omap/include/plat/smartreflex.h245
-rw-r--r--arch/arm/plat-omap/include/plat/sram.h11
-rw-r--r--arch/arm/plat-omap/include/plat/uncompress.h3
-rw-r--r--arch/arm/plat-omap/include/plat/voltage.h146
26 files changed, 709 insertions, 579 deletions
diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h
index 4b2028ab4d2b..256ab3f1ec8f 100644
--- a/arch/arm/plat-omap/include/plat/clkdev_omap.h
+++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h
@@ -31,18 +31,18 @@ struct omap_clk {
#define CK_1510 (1 << 2)
#define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */
#define CK_242X (1 << 4)
-#define CK_243X (1 << 5)
-#define CK_3XXX (1 << 6) /* OMAP3 + AM3 common clocks*/
-#define CK_343X (1 << 7) /* OMAP34xx common clocks */
-#define CK_3430ES1 (1 << 8) /* 34xxES1 only */
-#define CK_3430ES2 (1 << 9) /* 34xxES2, ES3, non-Sitara 35xx only */
-#define CK_3505 (1 << 10)
-#define CK_3517 (1 << 11)
-#define CK_36XX (1 << 12) /* OMAP36xx/37xx-specific clocks */
-#define CK_443X (1 << 13)
+#define CK_243X (1 << 5) /* 243x, 253x */
+#define CK_3430ES1 (1 << 6) /* 34xxES1 only */
+#define CK_3430ES2PLUS (1 << 7) /* 34xxES2, ES3, non-Sitara 35xx only */
+#define CK_3505 (1 << 8)
+#define CK_3517 (1 << 9)
+#define CK_36XX (1 << 10) /* 36xx/37xx-specific clocks */
+#define CK_443X (1 << 11)
-#define CK_AM35XX (CK_3505 | CK_3517) /* all Sitara AM35xx */
+#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS)
+#define CK_AM35XX (CK_3505 | CK_3517) /* all Sitara AM35xx */
+#define CK_3XXX (CK_34XX | CK_AM35XX | CK_36XX)
#endif
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index fef4696dcf67..8eb0adab19ea 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -49,13 +49,18 @@ struct clkops {
/* struct clksel_rate.flags possibilities */
#define RATE_IN_242X (1 << 0)
#define RATE_IN_243X (1 << 1)
-#define RATE_IN_3XXX (1 << 2) /* rates common to all OMAP3 */
-#define RATE_IN_3430ES2 (1 << 3) /* 3430ES2 rates only */
+#define RATE_IN_3430ES1 (1 << 2) /* 3430ES1 rates only */
+#define RATE_IN_3430ES2PLUS (1 << 3) /* 3430 ES >= 2 rates only */
#define RATE_IN_36XX (1 << 4)
#define RATE_IN_4430 (1 << 5)
#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
-#define RATE_IN_3430ES2PLUS (RATE_IN_3430ES2 | RATE_IN_36XX)
+#define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
+#define RATE_IN_3XXX (RATE_IN_34XX | RATE_IN_36XX)
+
+/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */
+#define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX)
+
/**
* struct clksel_rate - register bitfield values corresponding to clk divisors
@@ -119,8 +124,7 @@ struct clksel {
*
* Possible values for @flags:
* DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
- * NO_DCO_SEL: don't program DCO (only for some J-type DPLLs)
-
+ *
* @freqsel_mask is only used on the OMAP34xx family and AM35xx.
*
* XXX Some DPLLs have multiple bypass inputs, so it's not technically
@@ -156,6 +160,8 @@ struct dpll_data {
u32 autoidle_mask;
u32 freqsel_mask;
u32 idlest_mask;
+ u32 dco_mask;
+ u32 sddiv_mask;
u8 auto_recal_bit;
u8 recal_en_bit;
u8 recal_st_bit;
diff --git a/arch/arm/plat-omap/include/plat/clockdomain.h b/arch/arm/plat-omap/include/plat/clockdomain.h
deleted file mode 100644
index ba0a6c07c0fe..000000000000
--- a/arch/arm/plat-omap/include/plat/clockdomain.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/clockdomain.h
- *
- * OMAP2/3 clockdomain framework functions
- *
- * Copyright (C) 2008 Texas Instruments, Inc.
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Written by Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H
-#define __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H
-
-#include <plat/powerdomain.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* Clockdomain capability flags */
-#define CLKDM_CAN_FORCE_SLEEP (1 << 0)
-#define CLKDM_CAN_FORCE_WAKEUP (1 << 1)
-#define CLKDM_CAN_ENABLE_AUTO (1 << 2)
-#define CLKDM_CAN_DISABLE_AUTO (1 << 3)
-
-#define CLKDM_CAN_HWSUP (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO)
-#define CLKDM_CAN_SWSUP (CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)
-#define CLKDM_CAN_HWSUP_SWSUP (CLKDM_CAN_SWSUP | CLKDM_CAN_HWSUP)
-
-/* OMAP24XX CM_CLKSTCTRL_*.AUTOSTATE_* register bit values */
-#define OMAP24XX_CLKSTCTRL_DISABLE_AUTO 0x0
-#define OMAP24XX_CLKSTCTRL_ENABLE_AUTO 0x1
-
-/* OMAP3XXX CM_CLKSTCTRL_*.CLKTRCTRL_* register bit values */
-#define OMAP34XX_CLKSTCTRL_DISABLE_AUTO 0x0
-#define OMAP34XX_CLKSTCTRL_FORCE_SLEEP 0x1
-#define OMAP34XX_CLKSTCTRL_FORCE_WAKEUP 0x2
-#define OMAP34XX_CLKSTCTRL_ENABLE_AUTO 0x3
-
-/**
- * struct clkdm_autodep - clkdm deps to add when entering/exiting hwsup mode
- * @clkdm: clockdomain to add wkdep+sleepdep on - set name member only
- * @omap_chip: OMAP chip types that this autodep is valid on
- *
- * A clockdomain that should have wkdeps and sleepdeps added when a
- * clockdomain should stay active in hwsup mode; and conversely,
- * removed when the clockdomain should be allowed to go inactive in
- * hwsup mode.
- *
- * Autodeps are deprecated and should be removed after
- * omap_hwmod-based fine-grained module idle control is added.
- */
-struct clkdm_autodep {
- union {
- const char *name;
- struct clockdomain *ptr;
- } clkdm;
- const struct omap_chip_id omap_chip;
-};
-
-/**
- * struct clkdm_dep - encode dependencies between clockdomains
- * @clkdm_name: clockdomain name
- * @clkdm: pointer to the struct clockdomain of @clkdm_name
- * @omap_chip: OMAP chip types that this dependency is valid on
- * @wkdep_usecount: Number of wakeup dependencies causing this clkdm to wake
- * @sleepdep_usecount: Number of sleep deps that could prevent clkdm from idle
- *
- * Statically defined. @clkdm is resolved from @clkdm_name at runtime and
- * should not be pre-initialized.
- *
- * XXX Should also include hardware (fixed) dependencies.
- */
-struct clkdm_dep {
- const char *clkdm_name;
- struct clockdomain *clkdm;
- atomic_t wkdep_usecount;
- atomic_t sleepdep_usecount;
- const struct omap_chip_id omap_chip;
-};
-
-/**
- * struct clockdomain - OMAP clockdomain
- * @name: clockdomain name
- * @pwrdm: powerdomain containing this clockdomain
- * @clktrctrl_reg: CLKSTCTRL reg for the given clock domain
- * @clktrctrl_mask: CLKTRCTRL/AUTOSTATE field mask in CM_CLKSTCTRL reg
- * @flags: Clockdomain capability flags
- * @dep_bit: Bit shift of this clockdomain's PM_WKDEP/CM_SLEEPDEP bit
- * @wkdep_srcs: Clockdomains that can be told to wake this powerdomain up
- * @sleepdep_srcs: Clockdomains that can be told to keep this clkdm from inact
- * @omap_chip: OMAP chip types that this clockdomain is valid on
- * @usecount: Usecount tracking
- * @node: list_head to link all clockdomains together
- */
-struct clockdomain {
- const char *name;
- union {
- const char *name;
- struct powerdomain *ptr;
- } pwrdm;
- void __iomem *clkstctrl_reg;
- const u16 clktrctrl_mask;
- const u8 flags;
- const u8 dep_bit;
- struct clkdm_dep *wkdep_srcs;
- struct clkdm_dep *sleepdep_srcs;
- const struct omap_chip_id omap_chip;
- atomic_t usecount;
- struct list_head node;
-};
-
-void clkdm_init(struct clockdomain **clkdms, struct clkdm_autodep *autodeps);
-struct clockdomain *clkdm_lookup(const char *name);
-
-int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
- void *user);
-struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm);
-
-int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
-int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
-int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
-int clkdm_clear_all_wkdeps(struct clockdomain *clkdm);
-int clkdm_add_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
-int clkdm_del_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
-int clkdm_read_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2);
-int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm);
-
-void omap2_clkdm_allow_idle(struct clockdomain *clkdm);
-void omap2_clkdm_deny_idle(struct clockdomain *clkdm);
-
-int omap2_clkdm_wakeup(struct clockdomain *clkdm);
-int omap2_clkdm_sleep(struct clockdomain *clkdm);
-
-int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk);
-int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk);
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index a9d69a09920d..6b8088ec74af 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -27,6 +27,8 @@
#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
#define __ARCH_ARM_MACH_OMAP_COMMON_H
+#include <linux/delay.h>
+
#include <plat/i2c.h>
struct sys_timer;
diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h
index 0cce4ca83aa0..d1c916fcf770 100644
--- a/arch/arm/plat-omap/include/plat/dma.h
+++ b/arch/arm/plat-omap/include/plat/dma.h
@@ -21,141 +21,15 @@
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H
-/* Move omap4 specific defines to dma-44xx.h */
-#include "dma-44xx.h"
+#include <linux/platform_device.h>
-/* Hardware registers for omap1 */
-#define OMAP1_DMA_BASE (0xfffed800)
-
-#define OMAP1_DMA_GCR 0x400
-#define OMAP1_DMA_GSCR 0x404
-#define OMAP1_DMA_GRST 0x408
-#define OMAP1_DMA_HW_ID 0x442
-#define OMAP1_DMA_PCH2_ID 0x444
-#define OMAP1_DMA_PCH0_ID 0x446
-#define OMAP1_DMA_PCH1_ID 0x448
-#define OMAP1_DMA_PCHG_ID 0x44a
-#define OMAP1_DMA_PCHD_ID 0x44c
-#define OMAP1_DMA_CAPS_0_U 0x44e
-#define OMAP1_DMA_CAPS_0_L 0x450
-#define OMAP1_DMA_CAPS_1_U 0x452
-#define OMAP1_DMA_CAPS_1_L 0x454
-#define OMAP1_DMA_CAPS_2 0x456
-#define OMAP1_DMA_CAPS_3 0x458
-#define OMAP1_DMA_CAPS_4 0x45a
-#define OMAP1_DMA_PCH2_SR 0x460
-#define OMAP1_DMA_PCH0_SR 0x480
-#define OMAP1_DMA_PCH1_SR 0x482
-#define OMAP1_DMA_PCHD_SR 0x4c0
-
-/* Hardware registers for omap2 and omap3 */
-#define OMAP24XX_DMA4_BASE (L4_24XX_BASE + 0x56000)
-#define OMAP34XX_DMA4_BASE (L4_34XX_BASE + 0x56000)
-#define OMAP44XX_DMA4_BASE (L4_44XX_BASE + 0x56000)
-
-#define OMAP_DMA4_REVISION 0x00
-#define OMAP_DMA4_GCR 0x78
-#define OMAP_DMA4_IRQSTATUS_L0 0x08
-#define OMAP_DMA4_IRQSTATUS_L1 0x0c
-#define OMAP_DMA4_IRQSTATUS_L2 0x10
-#define OMAP_DMA4_IRQSTATUS_L3 0x14
-#define OMAP_DMA4_IRQENABLE_L0 0x18
-#define OMAP_DMA4_IRQENABLE_L1 0x1c
-#define OMAP_DMA4_IRQENABLE_L2 0x20
-#define OMAP_DMA4_IRQENABLE_L3 0x24
-#define OMAP_DMA4_SYSSTATUS 0x28
-#define OMAP_DMA4_OCP_SYSCONFIG 0x2c
-#define OMAP_DMA4_CAPS_0 0x64
-#define OMAP_DMA4_CAPS_2 0x6c
-#define OMAP_DMA4_CAPS_3 0x70
-#define OMAP_DMA4_CAPS_4 0x74
-
-#define OMAP1_LOGICAL_DMA_CH_COUNT 17
-#define OMAP_DMA4_LOGICAL_DMA_CH_COUNT 32 /* REVISIT: Is this 32 + 2? */
-
-/* Common channel specific registers for omap1 */
-#define OMAP1_DMA_CH_BASE(n) (0x40 * (n) + 0x00)
-#define OMAP1_DMA_CSDP(n) (0x40 * (n) + 0x00)
-#define OMAP1_DMA_CCR(n) (0x40 * (n) + 0x02)
-#define OMAP1_DMA_CICR(n) (0x40 * (n) + 0x04)
-#define OMAP1_DMA_CSR(n) (0x40 * (n) + 0x06)
-#define OMAP1_DMA_CEN(n) (0x40 * (n) + 0x10)
-#define OMAP1_DMA_CFN(n) (0x40 * (n) + 0x12)
-#define OMAP1_DMA_CSFI(n) (0x40 * (n) + 0x14)
-#define OMAP1_DMA_CSEI(n) (0x40 * (n) + 0x16)
-#define OMAP1_DMA_CPC(n) (0x40 * (n) + 0x18) /* 15xx only */
-#define OMAP1_DMA_CSAC(n) (0x40 * (n) + 0x18)
-#define OMAP1_DMA_CDAC(n) (0x40 * (n) + 0x1a)
-#define OMAP1_DMA_CDEI(n) (0x40 * (n) + 0x1c)
-#define OMAP1_DMA_CDFI(n) (0x40 * (n) + 0x1e)
-#define OMAP1_DMA_CLNK_CTRL(n) (0x40 * (n) + 0x28)
-
-/* Common channel specific registers for omap2 */
-#define OMAP_DMA4_CH_BASE(n) (0x60 * (n) + 0x80)
-#define OMAP_DMA4_CCR(n) (0x60 * (n) + 0x80)
-#define OMAP_DMA4_CLNK_CTRL(n) (0x60 * (n) + 0x84)
-#define OMAP_DMA4_CICR(n) (0x60 * (n) + 0x88)
-#define OMAP_DMA4_CSR(n) (0x60 * (n) + 0x8c)
-#define OMAP_DMA4_CSDP(n) (0x60 * (n) + 0x90)
-#define OMAP_DMA4_CEN(n) (0x60 * (n) + 0x94)
-#define OMAP_DMA4_CFN(n) (0x60 * (n) + 0x98)
-#define OMAP_DMA4_CSEI(n) (0x60 * (n) + 0xa4)
-#define OMAP_DMA4_CSFI(n) (0x60 * (n) + 0xa8)
-#define OMAP_DMA4_CDEI(n) (0x60 * (n) + 0xac)
-#define OMAP_DMA4_CDFI(n) (0x60 * (n) + 0xb0)
-#define OMAP_DMA4_CSAC(n) (0x60 * (n) + 0xb4)
-#define OMAP_DMA4_CDAC(n) (0x60 * (n) + 0xb8)
-
-/* Channel specific registers only on omap1 */
-#define OMAP1_DMA_CSSA_L(n) (0x40 * (n) + 0x08)
-#define OMAP1_DMA_CSSA_U(n) (0x40 * (n) + 0x0a)
-#define OMAP1_DMA_CDSA_L(n) (0x40 * (n) + 0x0c)
-#define OMAP1_DMA_CDSA_U(n) (0x40 * (n) + 0x0e)
-#define OMAP1_DMA_COLOR_L(n) (0x40 * (n) + 0x20)
-#define OMAP1_DMA_COLOR_U(n) (0x40 * (n) + 0x22)
-#define OMAP1_DMA_CCR2(n) (0x40 * (n) + 0x24)
-#define OMAP1_DMA_LCH_CTRL(n) (0x40 * (n) + 0x2a) /* not on 15xx */
-#define OMAP1_DMA_CCEN(n) 0
-#define OMAP1_DMA_CCFN(n) 0
-
-/* Channel specific registers only on omap2 */
-#define OMAP_DMA4_CSSA(n) (0x60 * (n) + 0x9c)
-#define OMAP_DMA4_CDSA(n) (0x60 * (n) + 0xa0)
-#define OMAP_DMA4_CCEN(n) (0x60 * (n) + 0xbc)
-#define OMAP_DMA4_CCFN(n) (0x60 * (n) + 0xc0)
-#define OMAP_DMA4_COLOR(n) (0x60 * (n) + 0xc4)
-
-/* Additional registers available on OMAP4 */
-#define OMAP_DMA4_CDP(n) (0x60 * (n) + 0xd0)
-#define OMAP_DMA4_CNDP(n) (0x60 * (n) + 0xd4)
-#define OMAP_DMA4_CCDN(n) (0x60 * (n) + 0xd8)
-
-/* Dummy defines to keep multi-omap compiles happy */
-#define OMAP1_DMA_REVISION 0
-#define OMAP1_DMA_IRQSTATUS_L0 0
-#define OMAP1_DMA_IRQENABLE_L0 0
-#define OMAP1_DMA_OCP_SYSCONFIG 0
-#define OMAP_DMA4_HW_ID 0
-#define OMAP_DMA4_CAPS_0_L 0
-#define OMAP_DMA4_CAPS_0_U 0
-#define OMAP_DMA4_CAPS_1_L 0
-#define OMAP_DMA4_CAPS_1_U 0
-#define OMAP_DMA4_GSCR 0
-#define OMAP_DMA4_CPC(n) 0
-
-#define OMAP_DMA4_LCH_CTRL(n) 0
-#define OMAP_DMA4_COLOR_L(n) 0
-#define OMAP_DMA4_COLOR_U(n) 0
-#define OMAP_DMA4_CCR2(n) 0
-#define OMAP1_DMA_CSSA(n) 0
-#define OMAP1_DMA_CDSA(n) 0
-#define OMAP_DMA4_CSSA_L(n) 0
-#define OMAP_DMA4_CSSA_U(n) 0
-#define OMAP_DMA4_CDSA_L(n) 0
-#define OMAP_DMA4_CDSA_U(n) 0
-#define OMAP1_DMA_COLOR(n) 0
+/*
+ * TODO: These dma channel defines should go away once all
+ * the omap drivers hwmod adapted.
+ */
-/*----------------------------------------------------------------------------*/
+/* Move omap4 specific defines to dma-44xx.h */
+#include "dma-44xx.h"
/* DMA channels for omap1 */
#define OMAP_DMA_NO_DEVICE 0
@@ -405,6 +279,63 @@
#define DMA_CH_PRIO_HIGH 0x1
#define DMA_CH_PRIO_LOW 0x0 /* Def */
+/* Errata handling */
+#define IS_DMA_ERRATA(id) (errata & (id))
+#define SET_DMA_ERRATA(id) (errata |= (id))
+
+#define DMA_ERRATA_IFRAME_BUFFERING BIT(0x0)
+#define DMA_ERRATA_PARALLEL_CHANNELS BIT(0x1)
+#define DMA_ERRATA_i378 BIT(0x2)
+#define DMA_ERRATA_i541 BIT(0x3)
+#define DMA_ERRATA_i88 BIT(0x4)
+#define DMA_ERRATA_3_3 BIT(0x5)
+#define DMA_ROMCODE_BUG BIT(0x6)
+
+/* Attributes for OMAP DMA Contrller */
+#define DMA_LINKED_LCH BIT(0x0)
+#define GLOBAL_PRIORITY BIT(0x1)
+#define RESERVE_CHANNEL BIT(0x2)
+#define IS_CSSA_32 BIT(0x3)
+#define IS_CDSA_32 BIT(0x4)
+#define IS_RW_PRIORITY BIT(0x5)
+#define ENABLE_1510_MODE BIT(0x6)
+#define SRC_PORT BIT(0x7)
+#define DST_PORT BIT(0x8)
+#define SRC_INDEX BIT(0x9)
+#define DST_INDEX BIT(0xA)
+#define IS_BURST_ONLY4 BIT(0xB)
+#define CLEAR_CSR_ON_READ BIT(0xC)
+#define IS_WORD_16 BIT(0xD)
+
+enum omap_reg_offsets {
+
+GCR, GSCR, GRST1, HW_ID,
+PCH2_ID, PCH0_ID, PCH1_ID, PCHG_ID,
+PCHD_ID, CAPS_0, CAPS_1, CAPS_2,
+CAPS_3, CAPS_4, PCH2_SR, PCH0_SR,
+PCH1_SR, PCHD_SR, REVISION, IRQSTATUS_L0,
+IRQSTATUS_L1, IRQSTATUS_L2, IRQSTATUS_L3, IRQENABLE_L0,
+IRQENABLE_L1, IRQENABLE_L2, IRQENABLE_L3, SYSSTATUS,
+OCP_SYSCONFIG,
+
+/* omap1+ specific */
+CPC, CCR2, LCH_CTRL,
+
+/* Common registers for all omap's */
+CSDP, CCR, CICR, CSR,
+CEN, CFN, CSFI, CSEI,
+CSAC, CDAC, CDEI,
+CDFI, CLNK_CTRL,
+
+/* Channel specific registers */
+CSSA, CDSA, COLOR,
+CCEN, CCFN,
+
+/* omap3630 and omap4 specific */
+CDP, CNDP, CCDN,
+
+};
+
enum omap_dma_burst_mode {
OMAP_DMA_DATA_BURST_DIS = 0,
OMAP_DMA_DATA_BURST_4,
@@ -470,6 +401,41 @@ struct omap_dma_channel_params {
#endif
};
+struct omap_dma_lch {
+ int next_lch;
+ int dev_id;
+ u16 saved_csr;
+ u16 enabled_irqs;
+ const char *dev_name;
+ void (*callback)(int lch, u16 ch_status, void *data);
+ void *data;
+ long flags;
+ /* required for Dynamic chaining */
+ int prev_linked_ch;
+ int next_linked_ch;
+ int state;
+ int chain_id;
+ int status;
+};
+
+struct omap_dma_dev_attr {
+ u32 dev_caps;
+ u16 lch_count;
+ u16 chan_count;
+ struct omap_dma_lch *chan;
+};
+
+/* System DMA platform data structure */
+struct omap_system_dma_plat_info {
+ struct omap_dma_dev_attr *dma_attr;
+ u32 errata;
+ void (*disable_irq_lch)(int lch);
+ void (*show_dma_caps)(void);
+ void (*clear_lch_regs)(int lch);
+ void (*clear_dma)(int lch);
+ void (*dma_write)(u32 val, int reg, int lch);
+ u32 (*dma_read)(int reg, int lch);
+};
extern void omap_set_dma_priority(int lch, int dst_port, int priority);
extern int omap_request_dma(int dev_id, const char *dev_name,
diff --git a/arch/arm/plat-omap/include/plat/fpga.h b/arch/arm/plat-omap/include/plat/fpga.h
index f1864a652f7a..ae39bcb3f5ba 100644
--- a/arch/arm/plat-omap/include/plat/fpga.h
+++ b/arch/arm/plat-omap/include/plat/fpga.h
@@ -19,11 +19,7 @@
#ifndef __ASM_ARCH_OMAP_FPGA_H
#define __ASM_ARCH_OMAP_FPGA_H
-#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP15XX)
extern void omap1510_fpga_init_irq(void);
-#else
-#define omap1510_fpga_init_irq() (0)
-#endif
#define fpga_read(reg) __raw_readb(reg)
#define fpga_write(val, reg) __raw_writeb(val, reg)
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index de1c604962eb..d6f9fa0f62af 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -27,26 +27,15 @@
#define __ASM_ARCH_OMAP_GPIO_H
#include <linux/io.h>
+#include <linux/platform_device.h>
#include <mach/irqs.h>
#define OMAP1_MPUIO_BASE 0xfffb5000
-#if (defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850))
-
-#define OMAP_MPUIO_INPUT_LATCH 0x00
-#define OMAP_MPUIO_OUTPUT 0x02
-#define OMAP_MPUIO_IO_CNTL 0x04
-#define OMAP_MPUIO_KBR_LATCH 0x08
-#define OMAP_MPUIO_KBC 0x0a
-#define OMAP_MPUIO_GPIO_EVENT_MODE 0x0c
-#define OMAP_MPUIO_GPIO_INT_EDGE 0x0e
-#define OMAP_MPUIO_KBD_INT 0x10
-#define OMAP_MPUIO_GPIO_INT 0x12
-#define OMAP_MPUIO_KBD_MASKIT 0x14
-#define OMAP_MPUIO_GPIO_MASKIT 0x16
-#define OMAP_MPUIO_GPIO_DEBOUNCING 0x18
-#define OMAP_MPUIO_LATCH 0x1a
-#else
+/*
+ * These are the omap15xx/16xx offsets. The omap7xx offset are
+ * OMAP_MPUIO_ / 2 offsets below.
+ */
#define OMAP_MPUIO_INPUT_LATCH 0x00
#define OMAP_MPUIO_OUTPUT 0x04
#define OMAP_MPUIO_IO_CNTL 0x08
@@ -60,7 +49,6 @@
#define OMAP_MPUIO_GPIO_MASKIT 0x2c
#define OMAP_MPUIO_GPIO_DEBOUNCING 0x30
#define OMAP_MPUIO_LATCH 0x34
-#endif
#define OMAP34XX_NR_GPIOS 6
@@ -71,8 +59,30 @@
IH_MPUIO_BASE + ((nr) & 0x0f) : \
IH_GPIO_BASE + (nr))
-extern int omap_gpio_init(void); /* Call from board init only */
-extern void omap2_gpio_prepare_for_idle(int power_state);
+#define METHOD_MPUIO 0
+#define METHOD_GPIO_1510 1
+#define METHOD_GPIO_1610 2
+#define METHOD_GPIO_7XX 3
+#define METHOD_GPIO_24XX 5
+#define METHOD_GPIO_44XX 6
+
+struct omap_gpio_dev_attr {
+ int bank_width; /* GPIO bank width */
+ bool dbck_flag; /* dbck required or not - True for OMAP3&4 */
+};
+
+struct omap_gpio_platform_data {
+ u16 virtual_irq_start;
+ int bank_type;
+ int bank_width; /* GPIO bank width */
+ int bank_stride; /* Only needed for omap1 MPUIO */
+ bool dbck_flag; /* dbck required or not - True for OMAP3&4 */
+};
+
+/* TODO: Analyze removing gpio_bank_count usage from driver code */
+extern int gpio_bank_count;
+
+extern void omap2_gpio_prepare_for_idle(int off_mode);
extern void omap2_gpio_resume_after_idle(void);
extern void omap_set_gpio_debounce(int gpio, int enable);
extern void omap_set_gpio_debounce_time(int gpio, int enable);
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index 9fd99b9e40ab..85ded598853e 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -80,12 +80,12 @@
#define GPMC_PREFETCH_STATUS_COUNT(val) (val & 0x00003fff)
/*
- * Note that all values in this struct are in nanoseconds, while
- * the register values are in gpmc_fck cycles.
+ * Note that all values in this struct are in nanoseconds except sync_clk
+ * (which is in picoseconds), while the register values are in gpmc_fck cycles.
*/
struct gpmc_timings {
- /* Minimum clock period for synchronous mode */
- u16 sync_clk;
+ /* Minimum clock period for synchronous mode (in picoseconds) */
+ u32 sync_clk;
/* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
u16 cs_on; /* Assertion time */
@@ -117,6 +117,7 @@ struct gpmc_timings {
};
extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
+extern unsigned int gpmc_ps_to_ticks(unsigned int time_ps);
extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns);
extern unsigned long gpmc_get_fclk_period(void);
diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h
index 36a0befd6168..878d632c4092 100644
--- a/arch/arm/plat-omap/include/plat/i2c.h
+++ b/arch/arm/plat-omap/include/plat/i2c.h
@@ -36,6 +36,19 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
}
#endif
+/**
+ * i2c_dev_attr - OMAP I2C controller device attributes for omap_hwmod
+ * @fifo_depth: total controller FIFO size (in bytes)
+ * @flags: differences in hardware support capability
+ *
+ * @fifo_depth represents what exists on the hardware, not what is
+ * actually configured at runtime by the device driver.
+ */
+struct omap_i2c_dev_attr {
+ u8 fifo_depth;
+ u8 flags;
+};
+
void __init omap1_i2c_mux_pins(int bus_id);
void __init omap2_i2c_mux_pins(int bus_id);
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
index 204865f91d93..ef4106c13183 100644
--- a/arch/arm/plat-omap/include/plat/io.h
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -291,8 +291,9 @@ static inline void omap44xx_map_common_io(void)
}
#endif
-extern void omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
- struct omap_sdrc_params *sdrc_cs1);
+extern void omap2_init_common_infrastructure(void);
+extern void omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0,
+ struct omap_sdrc_params *sdrc_cs1);
#define __arch_ioremap omap_ioremap
#define __arch_iounmap omap_iounmap
diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h
index 33c7d41cb6a5..69230d685538 100644
--- a/arch/arm/plat-omap/include/plat/iommu.h
+++ b/arch/arm/plat-omap/include/plat/iommu.h
@@ -50,6 +50,8 @@ struct iommu {
int (*isr)(struct iommu *obj);
void *ctx; /* iommu context: registres saved area */
+ u32 da_start;
+ u32 da_end;
};
struct cr_regs {
@@ -103,6 +105,8 @@ struct iommu_platform_data {
const char *name;
const char *clk_name;
const int nr_tlb_entries;
+ u32 da_start;
+ u32 da_end;
};
#if defined(CONFIG_ARCH_OMAP1)
@@ -152,6 +156,7 @@ extern void flush_iotlb_all(struct iommu *obj);
extern int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e);
extern size_t iopgtable_clear_entry(struct iommu *obj, u32 iova);
+extern int iommu_set_da_range(struct iommu *obj, u32 start, u32 end);
extern struct iommu *iommu_get(const char *name);
extern void iommu_put(struct iommu *obj);
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index 65e20a686713..2910de921c52 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -77,7 +77,7 @@
/*
* OMAP-1610 specific IRQ numbers for interrupt handler 1
*/
-#define INT_1610_IH2_IRQ 0
+#define INT_1610_IH2_IRQ INT_1510_IH2_IRQ
#define INT_1610_IH2_FIQ 2
#define INT_1610_McBSP2_TX 4
#define INT_1610_McBSP2_RX 5
diff --git a/arch/arm/plat-omap/include/plat/keypad.h b/arch/arm/plat-omap/include/plat/keypad.h
index 3ae52ccc793c..793ce9d53294 100644
--- a/arch/arm/plat-omap/include/plat/keypad.h
+++ b/arch/arm/plat-omap/include/plat/keypad.h
@@ -10,16 +10,18 @@
#ifndef ASMARM_ARCH_KEYPAD_H
#define ASMARM_ARCH_KEYPAD_H
-#warning: Please update the board to use matrix_keypad.h instead
+#ifndef CONFIG_ARCH_OMAP1
+#warning Please update the board to use matrix-keypad driver
+#endif
+#include <linux/input/matrix_keypad.h>
struct omap_kp_platform_data {
int rows;
int cols;
- int *keymap;
- unsigned int keymapsize;
- unsigned int rep:1;
+ const struct matrix_keymap_data *keymap_data;
+ bool rep;
unsigned long delay;
- unsigned int dbounce:1;
+ bool dbounce;
/* specific to OMAP242x*/
unsigned int *row_gpios;
unsigned int *col_gpios;
@@ -28,18 +30,21 @@ struct omap_kp_platform_data {
/* Group (0..3) -- when multiple keys are pressed, only the
* keys pressed in the same group are considered as pressed. This is
* in order to workaround certain crappy HW designs that produce ghost
- * keypresses. */
-#define GROUP_0 (0 << 16)
-#define GROUP_1 (1 << 16)
-#define GROUP_2 (2 << 16)
-#define GROUP_3 (3 << 16)
+ * keypresses. Two free bits, not used by neither row/col nor keynum,
+ * must be available for use as group bits. The below GROUP_SHIFT
+ * macro definition is based on some prior knowledge of the
+ * matrix_keypad defined KEY() macro internals.
+ */
+#define GROUP_SHIFT 14
+#define GROUP_0 (0 << GROUP_SHIFT)
+#define GROUP_1 (1 << GROUP_SHIFT)
+#define GROUP_2 (2 << GROUP_SHIFT)
+#define GROUP_3 (3 << GROUP_SHIFT)
#define GROUP_MASK GROUP_3
+#if KEY_MAX & GROUP_MASK
+#error Group bits in conflict with keynum bits
+#endif
-#define KEY_PERSISTENT 0x00800000
-#define KEYNUM_MASK 0x00EFFFFF
-#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
-#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \
- KEY_PERSISTENT)
#endif
diff --git a/arch/arm/plat-omap/include/plat/l4_3xxx.h b/arch/arm/plat-omap/include/plat/l4_3xxx.h
new file mode 100644
index 000000000000..5e1949375422
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/l4_3xxx.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/plat-omap/include/mach/l4_3xxx.h - L4 firewall definitions
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_L4_3XXX_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_L4_3XXX_H
+
+/* L4 CORE */
+#define OMAP3_L4_CORE_FW_I2C1_REGION 21
+#define OMAP3_L4_CORE_FW_I2C1_TA_REGION 22
+#define OMAP3_L4_CORE_FW_I2C2_REGION 23
+#define OMAP3_L4_CORE_FW_I2C2_TA_REGION 24
+#define OMAP3_L4_CORE_FW_I2C3_REGION 73
+#define OMAP3_L4_CORE_FW_I2C3_TA_REGION 74
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/mailbox.h b/arch/arm/plat-omap/include/plat/mailbox.h
index 997656552109..cc3921e9059c 100644
--- a/arch/arm/plat-omap/include/plat/mailbox.h
+++ b/arch/arm/plat-omap/include/plat/mailbox.h
@@ -46,8 +46,8 @@ struct omap_mbox_queue {
struct kfifo fifo;
struct work_struct work;
struct tasklet_struct tasklet;
- int (*callback)(void *);
struct omap_mbox *mbox;
+ bool full;
};
struct omap_mbox {
@@ -57,13 +57,15 @@ struct omap_mbox {
struct omap_mbox_ops *ops;
struct device *dev;
void *priv;
+ int use_count;
+ struct blocking_notifier_head notifier;
};
int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg);
void omap_mbox_init_seq(struct omap_mbox *);
-struct omap_mbox *omap_mbox_get(const char *);
-void omap_mbox_put(struct omap_mbox *);
+struct omap_mbox *omap_mbox_get(const char *, struct notifier_block *nb);
+void omap_mbox_put(struct omap_mbox *mbox, struct notifier_block *nb);
int omap_mbox_register(struct device *parent, struct omap_mbox **);
int omap_mbox_unregister(void);
diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h
index 728fbb9dd549..c0a752053039 100644
--- a/arch/arm/plat-omap/include/plat/omap-pm.h
+++ b/arch/arm/plat-omap/include/plat/omap-pm.h
@@ -17,26 +17,7 @@
#include <linux/device.h>
#include <linux/cpufreq.h>
#include <linux/clk.h>
-
-#include "powerdomain.h"
-
-/**
- * struct omap_opp - clock frequency-to-OPP ID table for DSP, MPU
- * @rate: target clock rate
- * @opp_id: OPP ID
- * @min_vdd: minimum VDD1 voltage (in millivolts) for this OPP
- *
- * Operating performance point data. Can vary by OMAP chip and board.
- */
-struct omap_opp {
- unsigned long rate;
- u8 opp_id;
- u16 min_vdd;
-};
-
-extern struct omap_opp *mpu_opps;
-extern struct omap_opp *dsp_opps;
-extern struct omap_opp *l3_opps;
+#include <linux/opp.h>
/*
* agent_id values for use with omap_pm_set_min_bus_tput():
@@ -59,9 +40,11 @@ extern struct omap_opp *l3_opps;
* framework starts. The "_if_" is to avoid name collisions with the
* PM idle-loop code.
*/
-int __init omap_pm_if_early_init(struct omap_opp *mpu_opp_table,
- struct omap_opp *dsp_opp_table,
- struct omap_opp *l3_opp_table);
+#ifdef CONFIG_OMAP_PM_NONE
+#define omap_pm_if_early_init() 0
+#else
+int __init omap_pm_if_early_init(void);
+#endif
/**
* omap_pm_if_init - OMAP PM init code called after clock fw init
@@ -69,7 +52,11 @@ int __init omap_pm_if_early_init(struct omap_opp *mpu_opp_table,
* The main initialization code. OPP tables are passed in here. The
* "_if_" is to avoid name collisions with the PM idle-loop code.
*/
+#ifdef CONFIG_OMAP_PM_NONE
+#define omap_pm_if_init() 0
+#else
int __init omap_pm_if_init(void);
+#endif
/**
* omap_pm_if_exit - OMAP PM exit code
@@ -363,9 +350,11 @@ unsigned long omap_pm_cpu_get_freq(void);
* driver must restore device context. If the number of context losses
* exceeds the maximum positive integer, the function will wrap to 0 and
* continue counting. Returns the number of context losses for this device,
- * or -EINVAL upon error.
+ * or zero upon error.
*/
-int omap_pm_get_dev_context_loss_count(struct device *dev);
+u32 omap_pm_get_dev_context_loss_count(struct device *dev);
+void omap_pm_enable_off_mode(void);
+void omap_pm_disable_off_mode(void);
#endif
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index c8dae02f0704..2682043f5a5b 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -22,7 +22,7 @@
#include <plat/mux.h>
-#define DRIVER_NAME "omap-hsuart"
+#define DRIVER_NAME "omap_uart"
/*
* Use tty device name as ttyO, [O -> OMAP]
@@ -31,20 +31,8 @@
*/
#define OMAP_SERIAL_NAME "ttyO"
-#define OMAP_MDR1_DISABLE 0x07
-#define OMAP_MDR1_MODE13X 0x03
-#define OMAP_MDR1_MODE16X 0x00
#define OMAP_MODE13X_SPEED 230400
-/*
- * LCR = 0XBF: Switch to Configuration Mode B.
- * In configuration mode b allow access
- * to EFR,DLL,DLH.
- * Reference OMAP TRM Chapter 17
- * Section: 1.4.3 Mode Selection
- */
-#define OMAP_UART_LCR_CONF_MDB 0XBF
-
/* WER = 0x7F
* Enable module level wakeup in WER reg
*/
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index 28e2d1a78433..e4c349ff9fd8 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -107,6 +107,7 @@ void __iomem *omap_device_get_rt_va(struct omap_device *od);
int omap_device_align_pm_lat(struct platform_device *pdev,
u32 new_wakeup_lat_limit);
struct powerdomain *omap_device_get_pwrdm(struct omap_device *od);
+u32 omap_device_get_context_loss_count(struct platform_device *pdev);
/* Other */
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 7eaa8edf3b14..6864a997f2ca 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -23,7 +23,7 @@
* - add pinmuxing
* - init_conn_id_bit (CONNID_BIT_VECTOR)
* - implement default hwmod SMS/SDRC flags?
- * - remove unused fields
+ * - move Linux-specific data ("non-ROM data") out
*
*/
#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
@@ -32,8 +32,9 @@
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/ioport.h>
-#include <linux/mutex.h>
+#include <linux/spinlock.h>
#include <plat/cpu.h>
+#include <plat/voltage.h>
struct omap_device;
@@ -76,6 +77,20 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
#define HWMOD_IDLEMODE_FORCE (1 << 0)
#define HWMOD_IDLEMODE_NO (1 << 1)
#define HWMOD_IDLEMODE_SMART (1 << 2)
+/* Slave idle mode flag only */
+#define HWMOD_IDLEMODE_SMART_WKUP (1 << 3)
+
+/**
+ * struct omap_hwmod_mux_info - hwmod specific mux configuration
+ * @pads: array of omap_device_pad entries
+ * @nr_pads: number of omap_device_pad entries
+ *
+ * Note that this is currently built during init as needed.
+ */
+struct omap_hwmod_mux_info {
+ int nr_pads;
+ struct omap_device_pad *pads;
+};
/**
* struct omap_hwmod_irq_info - MPU IRQs used by the hwmod
@@ -159,7 +174,7 @@ struct omap_hwmod_omap2_firewall {
* ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init.
* ADDR_TYPE_RT: Address space contains module register target data.
*/
-#define ADDR_MAP_ON_INIT (1 << 0)
+#define ADDR_MAP_ON_INIT (1 << 0) /* XXX does not belong */
#define ADDR_TYPE_RT (1 << 1)
/**
@@ -200,8 +215,6 @@ struct omap_hwmod_addr_space {
* @fw: interface firewall data
* @addr_cnt: ARRAY_SIZE(@addr)
* @width: OCP data width
- * @thread_cnt: number of threads
- * @max_burst_len: maximum burst length in @width sized words (0 if unlimited)
* @user: initiators using this interface (see OCP_USER_* macros above)
* @flags: OCP interface flags (see OCPIF_* macros above)
*
@@ -221,8 +234,6 @@ struct omap_hwmod_ocp_if {
} fw;
u8 addr_cnt;
u8 width;
- u8 thread_cnt;
- u8 max_burst_len;
u8 user;
u8 flags;
};
@@ -231,11 +242,12 @@ struct omap_hwmod_ocp_if {
/* Macros for use in struct omap_hwmod_sysconfig */
/* Flags for use in omap_hwmod_sysconfig.idlemodes */
-#define MASTER_STANDBY_SHIFT 2
+#define MASTER_STANDBY_SHIFT 4
#define SLAVE_IDLE_SHIFT 0
#define SIDLE_FORCE (HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT)
#define SIDLE_NO (HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT)
#define SIDLE_SMART (HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT)
+#define SIDLE_SMART_WKUP (HWMOD_IDLEMODE_SMART_WKUP << SLAVE_IDLE_SHIFT)
#define MSTANDBY_FORCE (HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT)
#define MSTANDBY_NO (HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT)
#define MSTANDBY_SMART (HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT)
@@ -357,14 +369,14 @@ struct omap_hwmod_omap4_prcm {
* HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
* of standby, rather than relying on module smart-standby
* HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
- * SDRAM controller, etc.
+ * SDRAM controller, etc. XXX probably belongs outside the main hwmod file
* HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
- * controller, etc.
+ * controller, etc. XXX probably belongs outside the main hwmod file
* HWMOD_NO_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE)
* when module is enabled, rather than the default, which is to
* enable autoidle
* HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
- * HWMOD_NO_IDLEST : this module does not have idle status - this is the case
+ * HWMOD_NO_IDLEST: this module does not have idle status - this is the case
* only for few initiator modules on OMAP2 & 3.
* HWMOD_CONTROL_OPT_CLKS_IN_RESET: Enable all optional clocks during reset.
* This is needed for devices like DSS that require optional clocks enabled
@@ -415,14 +427,31 @@ struct omap_hwmod_omap4_prcm {
* @name: name of the hwmod_class
* @sysc: device SYSCONFIG/SYSSTATUS register data
* @rev: revision of the IP class
+ * @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown
+ * @reset: ptr to fn to be executed in place of the standard hwmod reset fn
*
* Represent the class of a OMAP hardware "modules" (e.g. timer,
* smartreflex, gpio, uart...)
+ *
+ * @pre_shutdown is a function that will be run immediately before
+ * hwmod clocks are disabled, etc. It is intended for use for hwmods
+ * like the MPU watchdog, which cannot be disabled with the standard
+ * omap_hwmod_shutdown(). The function should return 0 upon success,
+ * or some negative error upon failure. Returning an error will cause
+ * omap_hwmod_shutdown() to abort the device shutdown and return an
+ * error.
+ *
+ * If @reset is defined, then the function it points to will be
+ * executed in place of the standard hwmod _reset() code in
+ * mach-omap2/omap_hwmod.c. This is needed for IP blocks which have
+ * unusual reset sequences - usually processor IP blocks like the IVA.
*/
struct omap_hwmod_class {
const char *name;
struct omap_hwmod_class_sysconfig *sysc;
u32 rev;
+ int (*pre_shutdown)(struct omap_hwmod *oh);
+ int (*reset)(struct omap_hwmod *oh);
};
/**
@@ -436,14 +465,14 @@ struct omap_hwmod_class {
* @main_clk: main clock: OMAP clock name
* @_clk: pointer to the main struct clk (filled in at runtime)
* @opt_clks: other device clocks that drivers can request (0..*)
+ * @vdd_name: voltage domain name
+ * @voltdm: pointer to voltage domain (filled in at runtime)
* @masters: ptr to array of OCP ifs that this hwmod can initiate on
* @slaves: ptr to array of OCP ifs that this hwmod can respond on
* @dev_attr: arbitrary device attributes that can be passed to the driver
* @_sysc_cache: internal-use hwmod flags
* @_mpu_rt_va: cached register target start address (internal use)
* @_mpu_port_index: cached MPU register target slave ID (internal use)
- * @msuspendmux_reg_id: CONTROL_MSUSPENDMUX register ID (1-6)
- * @msuspendmux_shift: CONTROL_MSUSPENDMUX register bit shift
* @mpu_irqs_cnt: number of @mpu_irqs
* @sdma_reqs_cnt: number of @sdma_reqs
* @opt_clks_cnt: number of @opt_clks
@@ -452,9 +481,10 @@ struct omap_hwmod_class {
* @response_lat: device OCP response latency (in interface clock cycles)
* @_int_flags: internal-use hwmod flags
* @_state: internal-use hwmod state
+ * @_postsetup_state: internal-use state to leave the hwmod in after _setup()
* @flags: hwmod flags (documented below)
* @omap_chip: OMAP chips this hwmod is present on
- * @_mutex: mutex serializing operations on this hwmod
+ * @_lock: spinlock serializing operations on this hwmod
* @node: list node for hwmod list (internal use)
*
* @main_clk refers to this module's "main clock," which for our
@@ -469,6 +499,7 @@ struct omap_hwmod {
const char *name;
struct omap_hwmod_class *class;
struct omap_device *od;
+ struct omap_hwmod_mux_info *mux;
struct omap_hwmod_irq_info *mpu_irqs;
struct omap_hwmod_dma_info *sdma_reqs;
struct omap_hwmod_rst_info *rst_lines;
@@ -479,17 +510,17 @@ struct omap_hwmod {
const char *main_clk;
struct clk *_clk;
struct omap_hwmod_opt_clk *opt_clks;
+ char *vdd_name;
+ struct voltagedomain *voltdm;
struct omap_hwmod_ocp_if **masters; /* connect to *_IA */
struct omap_hwmod_ocp_if **slaves; /* connect to *_TA */
void *dev_attr;
u32 _sysc_cache;
void __iomem *_mpu_rt_va;
- struct mutex _mutex;
+ spinlock_t _lock;
struct list_head node;
u16 flags;
u8 _mpu_port_index;
- u8 msuspendmux_reg_id;
- u8 msuspendmux_shift;
u8 response_lat;
u8 mpu_irqs_cnt;
u8 sdma_reqs_cnt;
@@ -500,16 +531,15 @@ struct omap_hwmod {
u8 hwmods_cnt;
u8 _int_flags;
u8 _state;
+ u8 _postsetup_state;
const struct omap_chip_id omap_chip;
};
int omap_hwmod_init(struct omap_hwmod **ohs);
-int omap_hwmod_register(struct omap_hwmod *oh);
-int omap_hwmod_unregister(struct omap_hwmod *oh);
struct omap_hwmod *omap_hwmod_lookup(const char *name);
int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
void *data);
-int omap_hwmod_late_init(u8 skip_setup_idle);
+int omap_hwmod_late_init(void);
int omap_hwmod_enable(struct omap_hwmod *oh);
int _omap_hwmod_enable(struct omap_hwmod *oh);
@@ -556,6 +586,9 @@ int omap_hwmod_for_each_by_class(const char *classname,
void *user),
void *user);
+int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state);
+u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
+
/*
* Chip variant-specific hwmod init routines - XXX should be converted
* to use initcalls once the initial boot ordering is straightened out
diff --git a/arch/arm/plat-omap/include/plat/powerdomain.h b/arch/arm/plat-omap/include/plat/powerdomain.h
deleted file mode 100644
index 9ca420dcd2f8..000000000000
--- a/arch/arm/plat-omap/include/plat/powerdomain.h
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * OMAP2/3 powerdomain control
- *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2009 Nokia Corporation
- *
- * Written by Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef ASM_ARM_ARCH_OMAP_POWERDOMAIN
-#define ASM_ARM_ARCH_OMAP_POWERDOMAIN
-
-#include <linux/types.h>
-#include <linux/list.h>
-
-#include <asm/atomic.h>
-
-#include <plat/cpu.h>
-
-
-/* Powerdomain basic power states */
-#define PWRDM_POWER_OFF 0x0
-#define PWRDM_POWER_RET 0x1
-#define PWRDM_POWER_INACTIVE 0x2
-#define PWRDM_POWER_ON 0x3
-
-#define PWRDM_MAX_PWRSTS 4
-
-/* Powerdomain allowable state bitfields */
-#define PWRSTS_ON (1 << PWRDM_POWER_ON)
-#define PWRSTS_OFF (1 << PWRDM_POWER_OFF)
-#define PWRSTS_OFF_ON ((1 << PWRDM_POWER_OFF) | \
- (1 << PWRDM_POWER_ON))
-
-#define PWRSTS_OFF_RET ((1 << PWRDM_POWER_OFF) | \
- (1 << PWRDM_POWER_RET))
-
-#define PWRSTS_RET_ON ((1 << PWRDM_POWER_RET) | \
- (1 << PWRDM_POWER_ON))
-
-#define PWRSTS_OFF_RET_ON (PWRSTS_OFF_RET | (1 << PWRDM_POWER_ON))
-
-
-/* Powerdomain flags */
-#define PWRDM_HAS_HDWR_SAR (1 << 0) /* hardware save-and-restore support */
-#define PWRDM_HAS_MPU_QUIRK (1 << 1) /* MPU pwr domain has MEM bank 0 bits
- * in MEM bank 1 position. This is
- * true for OMAP3430
- */
-#define PWRDM_HAS_LOWPOWERSTATECHANGE (1 << 2) /*
- * support to transition from a
- * sleep state to a lower sleep
- * state without waking up the
- * powerdomain
- */
-
-/*
- * Number of memory banks that are power-controllable. On OMAP4430, the
- * maximum is 5.
- */
-#define PWRDM_MAX_MEM_BANKS 5
-
-/*
- * Maximum number of clockdomains that can be associated with a powerdomain.
- * CORE powerdomain on OMAP4 is the worst case
- */
-#define PWRDM_MAX_CLKDMS 9
-
-/* XXX A completely arbitrary number. What is reasonable here? */
-#define PWRDM_TRANSITION_BAILOUT 100000
-
-struct clockdomain;
-struct powerdomain;
-
-/**
- * struct powerdomain - OMAP powerdomain
- * @name: Powerdomain name
- * @omap_chip: represents the OMAP chip types containing this pwrdm
- * @prcm_offs: the address offset from CM_BASE/PRM_BASE
- * @pwrsts: Possible powerdomain power states
- * @pwrsts_logic_ret: Possible logic power states when pwrdm in RETENTION
- * @flags: Powerdomain flags
- * @banks: Number of software-controllable memory banks in this powerdomain
- * @pwrsts_mem_ret: Possible memory bank pwrstates when pwrdm in RETENTION
- * @pwrsts_mem_on: Possible memory bank pwrstates when pwrdm in ON
- * @pwrdm_clkdms: Clockdomains in this powerdomain
- * @node: list_head linking all powerdomains
- * @state:
- * @state_counter:
- * @timer:
- * @state_timer:
- */
-struct powerdomain {
- const char *name;
- const struct omap_chip_id omap_chip;
- const s16 prcm_offs;
- const u8 pwrsts;
- const u8 pwrsts_logic_ret;
- const u8 flags;
- const u8 banks;
- const u8 pwrsts_mem_ret[PWRDM_MAX_MEM_BANKS];
- const u8 pwrsts_mem_on[PWRDM_MAX_MEM_BANKS];
- struct clockdomain *pwrdm_clkdms[PWRDM_MAX_CLKDMS];
- struct list_head node;
- int state;
- unsigned state_counter[PWRDM_MAX_PWRSTS];
- unsigned ret_logic_off_counter;
- unsigned ret_mem_off_counter[PWRDM_MAX_MEM_BANKS];
-
-#ifdef CONFIG_PM_DEBUG
- s64 timer;
- s64 state_timer[PWRDM_MAX_PWRSTS];
-#endif
-};
-
-
-void pwrdm_init(struct powerdomain **pwrdm_list);
-
-struct powerdomain *pwrdm_lookup(const char *name);
-
-int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
- void *user);
-int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
- void *user);
-
-int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
-int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
-int pwrdm_for_each_clkdm(struct powerdomain *pwrdm,
- int (*fn)(struct powerdomain *pwrdm,
- struct clockdomain *clkdm));
-
-int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm);
-
-int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
-int pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
-int pwrdm_read_pwrst(struct powerdomain *pwrdm);
-int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm);
-int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm);
-
-int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst);
-int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
-int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
-
-int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm);
-int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm);
-int pwrdm_read_logic_retst(struct powerdomain *pwrdm);
-int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
-int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
-int pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank);
-
-int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm);
-int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm);
-bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm);
-
-int pwrdm_wait_transition(struct powerdomain *pwrdm);
-
-int pwrdm_state_switch(struct powerdomain *pwrdm);
-int pwrdm_clkdm_state_switch(struct clockdomain *clkdm);
-int pwrdm_pre_transition(void);
-int pwrdm_post_transition(void);
-int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm);
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h
index ab77442e42ab..2fdf8c80d390 100644
--- a/arch/arm/plat-omap/include/plat/prcm.h
+++ b/arch/arm/plat-omap/include/plat/prcm.h
@@ -18,6 +18,10 @@
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * XXX This file is deprecated. The PRCM is an OMAP2+-only subsystem,
+ * so this file doesn't belong in plat-omap/include/plat. Please
+ * do not add anything new to this file.
*/
#ifndef __ASM_ARM_ARCH_OMAP_PRCM_H
@@ -28,22 +32,6 @@ void omap_prcm_arch_reset(char mode, const char *cmd);
int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
const char *name);
-#define START_PADCONF_SAVE 0x2
-#define PADCONF_SAVE_DONE 0x1
-
-void omap3_prcm_save_context(void);
-void omap3_prcm_restore_context(void);
-
-u32 prm_read_mod_reg(s16 module, u16 idx);
-void prm_write_mod_reg(u32 val, s16 module, u16 idx);
-u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
-u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask);
-u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask);
-u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg);
-u32 cm_read_mod_reg(s16 module, u16 idx);
-void cm_write_mod_reg(u32 val, s16 module, u16 idx);
-u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
-
#endif
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index 19145f5c32ba..cec5d56db2eb 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -93,9 +93,12 @@
})
#ifndef __ASSEMBLER__
+
+struct omap_board_data;
+
extern void __init omap_serial_early_init(void);
extern void omap_serial_init(void);
-extern void omap_serial_init_port(int port);
+extern void omap_serial_init_port(struct omap_board_data *bdata);
extern int omap_uart_can_sleep(void);
extern void omap_uart_check_wakeup(void);
extern void omap_uart_prepare_suspend(void);
diff --git a/arch/arm/plat-omap/include/plat/smartreflex.h b/arch/arm/plat-omap/include/plat/smartreflex.h
new file mode 100644
index 000000000000..6568c885f37a
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/smartreflex.h
@@ -0,0 +1,245 @@
+/*
+ * OMAP Smartreflex Defines and Routines
+ *
+ * Author: Thara Gopinath <thara@ti.com>
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Thara Gopinath <thara@ti.com>
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Kalle Jokiniemi
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Lesly A M <x0080970@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_OMAP_SMARTREFLEX_H
+#define __ASM_ARM_OMAP_SMARTREFLEX_H
+
+#include <linux/platform_device.h>
+#include <plat/voltage.h>
+
+/*
+ * Different Smartreflex IPs version. The v1 is the 65nm version used in
+ * OMAP3430. The v2 is the update for the 45nm version of the IP
+ * used in OMAP3630 and OMAP4430
+ */
+#define SR_TYPE_V1 1
+#define SR_TYPE_V2 2
+
+/* SMART REFLEX REG ADDRESS OFFSET */
+#define SRCONFIG 0x00
+#define SRSTATUS 0x04
+#define SENVAL 0x08
+#define SENMIN 0x0C
+#define SENMAX 0x10
+#define SENAVG 0x14
+#define AVGWEIGHT 0x18
+#define NVALUERECIPROCAL 0x1c
+#define SENERROR_V1 0x20
+#define ERRCONFIG_V1 0x24
+#define IRQ_EOI 0x20
+#define IRQSTATUS_RAW 0x24
+#define IRQSTATUS 0x28
+#define IRQENABLE_SET 0x2C
+#define IRQENABLE_CLR 0x30
+#define SENERROR_V2 0x34
+#define ERRCONFIG_V2 0x38
+
+/* Bit/Shift Positions */
+
+/* SRCONFIG */
+#define SRCONFIG_ACCUMDATA_SHIFT 22
+#define SRCONFIG_SRCLKLENGTH_SHIFT 12
+#define SRCONFIG_SENNENABLE_V1_SHIFT 5
+#define SRCONFIG_SENPENABLE_V1_SHIFT 3
+#define SRCONFIG_SENNENABLE_V2_SHIFT 1
+#define SRCONFIG_SENPENABLE_V2_SHIFT 0
+#define SRCONFIG_CLKCTRL_SHIFT 0
+
+#define SRCONFIG_ACCUMDATA_MASK (0x3ff << 22)
+
+#define SRCONFIG_SRENABLE BIT(11)
+#define SRCONFIG_SENENABLE BIT(10)
+#define SRCONFIG_ERRGEN_EN BIT(9)
+#define SRCONFIG_MINMAXAVG_EN BIT(8)
+#define SRCONFIG_DELAYCTRL BIT(2)
+
+/* AVGWEIGHT */
+#define AVGWEIGHT_SENPAVGWEIGHT_SHIFT 2
+#define AVGWEIGHT_SENNAVGWEIGHT_SHIFT 0
+
+/* NVALUERECIPROCAL */
+#define NVALUERECIPROCAL_SENPGAIN_SHIFT 20
+#define NVALUERECIPROCAL_SENNGAIN_SHIFT 16
+#define NVALUERECIPROCAL_RNSENP_SHIFT 8
+#define NVALUERECIPROCAL_RNSENN_SHIFT 0
+
+/* ERRCONFIG */
+#define ERRCONFIG_ERRWEIGHT_SHIFT 16
+#define ERRCONFIG_ERRMAXLIMIT_SHIFT 8
+#define ERRCONFIG_ERRMINLIMIT_SHIFT 0
+
+#define SR_ERRWEIGHT_MASK (0x07 << 16)
+#define SR_ERRMAXLIMIT_MASK (0xff << 8)
+#define SR_ERRMINLIMIT_MASK (0xff << 0)
+
+#define ERRCONFIG_VPBOUNDINTEN_V1 BIT(31)
+#define ERRCONFIG_VPBOUNDINTST_V1 BIT(30)
+#define ERRCONFIG_MCUACCUMINTEN BIT(29)
+#define ERRCONFIG_MCUACCUMINTST BIT(28)
+#define ERRCONFIG_MCUVALIDINTEN BIT(27)
+#define ERRCONFIG_MCUVALIDINTST BIT(26)
+#define ERRCONFIG_MCUBOUNDINTEN BIT(25)
+#define ERRCONFIG_MCUBOUNDINTST BIT(24)
+#define ERRCONFIG_MCUDISACKINTEN BIT(23)
+#define ERRCONFIG_VPBOUNDINTST_V2 BIT(23)
+#define ERRCONFIG_MCUDISACKINTST BIT(22)
+#define ERRCONFIG_VPBOUNDINTEN_V2 BIT(22)
+
+#define ERRCONFIG_STATUS_V1_MASK (ERRCONFIG_VPBOUNDINTST_V1 | \
+ ERRCONFIG_MCUACCUMINTST | \
+ ERRCONFIG_MCUVALIDINTST | \
+ ERRCONFIG_MCUBOUNDINTST | \
+ ERRCONFIG_MCUDISACKINTST)
+/* IRQSTATUS */
+#define IRQSTATUS_MCUACCUMINT BIT(3)
+#define IRQSTATUS_MCVALIDINT BIT(2)
+#define IRQSTATUS_MCBOUNDSINT BIT(1)
+#define IRQSTATUS_MCUDISABLEACKINT BIT(0)
+
+/* IRQENABLE_SET and IRQENABLE_CLEAR */
+#define IRQENABLE_MCUACCUMINT BIT(3)
+#define IRQENABLE_MCUVALIDINT BIT(2)
+#define IRQENABLE_MCUBOUNDSINT BIT(1)
+#define IRQENABLE_MCUDISABLEACKINT BIT(0)
+
+/* Common Bit values */
+
+#define SRCLKLENGTH_12MHZ_SYSCLK 0x3c
+#define SRCLKLENGTH_13MHZ_SYSCLK 0x41
+#define SRCLKLENGTH_19MHZ_SYSCLK 0x60
+#define SRCLKLENGTH_26MHZ_SYSCLK 0x82
+#define SRCLKLENGTH_38MHZ_SYSCLK 0xC0
+
+/*
+ * 3430 specific values. Maybe these should be passed from board file or
+ * pmic structures.
+ */
+#define OMAP3430_SR_ACCUMDATA 0x1f4
+
+#define OMAP3430_SR1_SENPAVGWEIGHT 0x03
+#define OMAP3430_SR1_SENNAVGWEIGHT 0x03
+
+#define OMAP3430_SR2_SENPAVGWEIGHT 0x01
+#define OMAP3430_SR2_SENNAVGWEIGHT 0x01
+
+#define OMAP3430_SR_ERRWEIGHT 0x04
+#define OMAP3430_SR_ERRMAXLIMIT 0x02
+
+/**
+ * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass
+ * pmic specific info to smartreflex driver
+ *
+ * @sr_pmic_init: API to initialize smartreflex on the PMIC side.
+ */
+struct omap_sr_pmic_data {
+ void (*sr_pmic_init) (void);
+};
+
+#ifdef CONFIG_OMAP_SMARTREFLEX
+/*
+ * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR.
+ * The smartreflex class driver should pass the class type.
+ * Should be used to populate the class_type field of the
+ * omap_smartreflex_class_data structure.
+ */
+#define SR_CLASS1 0x1
+#define SR_CLASS2 0x2
+#define SR_CLASS3 0x3
+
+/**
+ * struct omap_sr_class_data - Smartreflex class driver info
+ *
+ * @enable: API to enable a particular class smaartreflex.
+ * @disable: API to disable a particular class smartreflex.
+ * @configure: API to configure a particular class smartreflex.
+ * @notify: API to notify the class driver about an event in SR.
+ * Not needed for class3.
+ * @notify_flags: specify the events to be notified to the class driver
+ * @class_type: specify which smartreflex class.
+ * Can be used by the SR driver to take any class
+ * based decisions.
+ */
+struct omap_sr_class_data {
+ int (*enable)(struct voltagedomain *voltdm);
+ int (*disable)(struct voltagedomain *voltdm, int is_volt_reset);
+ int (*configure)(struct voltagedomain *voltdm);
+ int (*notify)(struct voltagedomain *voltdm, u32 status);
+ u8 notify_flags;
+ u8 class_type;
+};
+
+/**
+ * struct omap_sr_nvalue_table - Smartreflex n-target value info
+ *
+ * @efuse_offs: The offset of the efuse where n-target values are stored.
+ * @nvalue: The n-target value.
+ */
+struct omap_sr_nvalue_table {
+ u32 efuse_offs;
+ u32 nvalue;
+};
+
+/**
+ * struct omap_sr_data - Smartreflex platform data.
+ *
+ * @ip_type: Smartreflex IP type.
+ * @senp_mod: SENPENABLE value for the sr
+ * @senn_mod: SENNENABLE value for sr
+ * @nvalue_count: Number of distinct nvalues in the nvalue table
+ * @enable_on_init: whether this sr module needs to enabled at
+ * boot up or not.
+ * @nvalue_table: table containing the efuse offsets and nvalues
+ * corresponding to them.
+ * @voltdm: Pointer to the voltage domain associated with the SR
+ */
+struct omap_sr_data {
+ int ip_type;
+ u32 senp_mod;
+ u32 senn_mod;
+ int nvalue_count;
+ bool enable_on_init;
+ struct omap_sr_nvalue_table *nvalue_table;
+ struct voltagedomain *voltdm;
+};
+
+/* Smartreflex module enable/disable interface */
+void omap_sr_enable(struct voltagedomain *voltdm);
+void omap_sr_disable(struct voltagedomain *voltdm);
+void omap_sr_disable_reset_volt(struct voltagedomain *voltdm);
+
+/* API to register the pmic specific data with the smartreflex driver. */
+void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data);
+
+/* Smartreflex driver hooks to be called from Smartreflex class driver */
+int sr_enable(struct voltagedomain *voltdm, unsigned long volt);
+void sr_disable(struct voltagedomain *voltdm);
+int sr_configure_errgen(struct voltagedomain *voltdm);
+int sr_configure_minmax(struct voltagedomain *voltdm);
+
+/* API to register the smartreflex class driver with the smartreflex driver */
+int sr_register_class(struct omap_sr_class_data *class_data);
+#else
+static inline void omap_sr_enable(struct voltagedomain *voltdm) {}
+static inline void omap_sr_disable(struct voltagedomain *voltdm) {}
+static inline void omap_sr_disable_reset_volt(
+ struct voltagedomain *voltdm) {}
+static inline void omap_sr_register_pmic(
+ struct omap_sr_pmic_data *pmic_data) {}
+#endif
+#endif
diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h
index 5905100b29a1..9967d5e855c7 100644
--- a/arch/arm/plat-omap/include/plat/sram.h
+++ b/arch/arm/plat-omap/include/plat/sram.h
@@ -11,6 +11,7 @@
#ifndef __ARCH_ARM_OMAP_SRAM_H
#define __ARCH_ARM_OMAP_SRAM_H
+#ifndef __ASSEMBLY__
extern void * omap_sram_push(void * start, unsigned long size);
extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
@@ -74,4 +75,14 @@ extern void omap_push_sram_idle(void);
static inline void omap_push_sram_idle(void) {}
#endif /* CONFIG_PM */
+#endif /* __ASSEMBLY__ */
+
+/*
+ * OMAP2+: define the SRAM PA addresses.
+ * Used by the SRAM management code and the idle sleep code.
+ */
+#define OMAP2_SRAM_PA 0x40200000
+#define OMAP3_SRAM_PA 0x40200000
+#define OMAP4_SRAM_PA 0x40300000
+
#endif
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index 9036e374e0ac..ad98b85cae21 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -145,8 +145,11 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
/* omap3 based boards using UART3 */
DEBUG_LL_OMAP3(3, cm_t35);
DEBUG_LL_OMAP3(3, cm_t3517);
+ DEBUG_LL_OMAP3(3, craneboard);
+ DEBUG_LL_OMAP3(3, devkit8000);
DEBUG_LL_OMAP3(3, igep0020);
DEBUG_LL_OMAP3(3, igep0030);
+ DEBUG_LL_OMAP3(3, nokia_rm680);
DEBUG_LL_OMAP3(3, nokia_rx51);
DEBUG_LL_OMAP3(3, omap3517evm);
DEBUG_LL_OMAP3(3, omap3_beagle);
diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h
new file mode 100644
index 000000000000..0ff123399f3b
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/voltage.h
@@ -0,0 +1,146 @@
+/*
+ * OMAP Voltage Management Routines
+ *
+ * Author: Thara Gopinath <thara@ti.com>
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ * Thara Gopinath <thara@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_VOLTAGE_H
+#define __ARCH_ARM_MACH_OMAP2_VOLTAGE_H
+
+#define VOLTSCALE_VPFORCEUPDATE 1
+#define VOLTSCALE_VCBYPASS 2
+
+/*
+ * OMAP3 GENERIC setup times. Revisit to see if these needs to be
+ * passed from board or PMIC file
+ */
+#define OMAP3_CLKSETUP 0xff
+#define OMAP3_VOLTOFFSET 0xff
+#define OMAP3_VOLTSETUP2 0xff
+
+/* Voltage value defines */
+#define OMAP3430_VDD_MPU_OPP1_UV 975000
+#define OMAP3430_VDD_MPU_OPP2_UV 1075000
+#define OMAP3430_VDD_MPU_OPP3_UV 1200000
+#define OMAP3430_VDD_MPU_OPP4_UV 1270000
+#define OMAP3430_VDD_MPU_OPP5_UV 1350000
+
+#define OMAP3430_VDD_CORE_OPP1_UV 975000
+#define OMAP3430_VDD_CORE_OPP2_UV 1050000
+#define OMAP3430_VDD_CORE_OPP3_UV 1150000
+
+#define OMAP3630_VDD_MPU_OPP50_UV 1012500
+#define OMAP3630_VDD_MPU_OPP100_UV 1200000
+#define OMAP3630_VDD_MPU_OPP120_UV 1325000
+#define OMAP3630_VDD_MPU_OPP1G_UV 1375000
+
+#define OMAP3630_VDD_CORE_OPP50_UV 1000000
+#define OMAP3630_VDD_CORE_OPP100_UV 1200000
+
+#define OMAP4430_VDD_MPU_OPP50_UV 930000
+#define OMAP4430_VDD_MPU_OPP100_UV 1100000
+#define OMAP4430_VDD_MPU_OPPTURBO_UV 1260000
+#define OMAP4430_VDD_MPU_OPPNITRO_UV 1350000
+
+#define OMAP4430_VDD_IVA_OPP50_UV 930000
+#define OMAP4430_VDD_IVA_OPP100_UV 1100000
+#define OMAP4430_VDD_IVA_OPPTURBO_UV 1260000
+
+#define OMAP4430_VDD_CORE_OPP50_UV 930000
+#define OMAP4430_VDD_CORE_OPP100_UV 1100000
+
+/**
+ * struct voltagedomain - omap voltage domain global structure.
+ * @name: Name of the voltage domain which can be used as a unique
+ * identifier.
+ */
+struct voltagedomain {
+ char *name;
+};
+
+/* API to get the voltagedomain pointer */
+struct voltagedomain *omap_voltage_domain_lookup(char *name);
+
+/**
+ * struct omap_volt_data - Omap voltage specific data.
+ * @voltage_nominal: The possible voltage value in uV
+ * @sr_efuse_offs: The offset of the efuse register(from system
+ * control module base address) from where to read
+ * the n-target value for the smartreflex module.
+ * @sr_errminlimit: Error min limit value for smartreflex. This value
+ * differs at differnet opp and thus is linked
+ * with voltage.
+ * @vp_errorgain: Error gain value for the voltage processor. This
+ * field also differs according to the voltage/opp.
+ */
+struct omap_volt_data {
+ u32 volt_nominal;
+ u32 sr_efuse_offs;
+ u8 sr_errminlimit;
+ u8 vp_errgain;
+};
+
+/**
+ * struct omap_volt_pmic_info - PMIC specific data required by voltage driver.
+ * @slew_rate: PMIC slew rate (in uv/us)
+ * @step_size: PMIC voltage step size (in uv)
+ * @vsel_to_uv: PMIC API to convert vsel value to actual voltage in uV.
+ * @uv_to_vsel: PMIC API to convert voltage in uV to vsel value.
+ */
+struct omap_volt_pmic_info {
+ int slew_rate;
+ int step_size;
+ u32 on_volt;
+ u32 onlp_volt;
+ u32 ret_volt;
+ u32 off_volt;
+ u16 volt_setup_time;
+ u8 vp_erroroffset;
+ u8 vp_vstepmin;
+ u8 vp_vstepmax;
+ u8 vp_vddmin;
+ u8 vp_vddmax;
+ u8 vp_timeout_us;
+ u8 i2c_slave_addr;
+ u8 pmic_reg;
+ unsigned long (*vsel_to_uv) (const u8 vsel);
+ u8 (*uv_to_vsel) (unsigned long uV);
+};
+
+unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm);
+void omap_vp_enable(struct voltagedomain *voltdm);
+void omap_vp_disable(struct voltagedomain *voltdm);
+int omap_voltage_scale_vdd(struct voltagedomain *voltdm,
+ unsigned long target_volt);
+void omap_voltage_reset(struct voltagedomain *voltdm);
+void omap_voltage_get_volttable(struct voltagedomain *voltdm,
+ struct omap_volt_data **volt_data);
+struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
+ unsigned long volt);
+unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm);
+struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm);
+#ifdef CONFIG_PM
+int omap_voltage_register_pmic(struct voltagedomain *voltdm,
+ struct omap_volt_pmic_info *pmic_info);
+void omap_change_voltscale_method(struct voltagedomain *voltdm,
+ int voltscale_method);
+int omap_voltage_late_init(void);
+#else
+static inline int omap_voltage_register_pmic(struct voltagedomain *voltdm,
+ struct omap_volt_pmic_info *pmic_info) {}
+static inline void omap_change_voltscale_method(struct voltagedomain *voltdm,
+ int voltscale_method) {}
+static inline int omap_voltage_late_init(void)
+{
+ return -EINVAL;
+}
+#endif
+
+#endif