ARM: OMAP: Sync core code with linux-omap

This patch syncs omap specific core code with linux-omap.
Most of the changes are needed to fix bitrot caused by
driver updates in linux-omap tree.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 159 insertions, 40 deletions

diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index 7e8096809be2..25489aafb113 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -37,9 +37,27 @@
 #include <asm/arch/usb.h>
 #include <asm/arch/board.h>
 
+#ifdef CONFIG_ARCH_OMAP1
+
+#define INT_USB_IRQ_GEN		IH2_BASE + 20
+#define INT_USB_IRQ_NISO	IH2_BASE + 30
+#define INT_USB_IRQ_ISO		IH2_BASE + 29
+#define INT_USB_IRQ_HGEN	INT_USB_HHC_1
+#define INT_USB_IRQ_OTG		IH2_BASE + 8
+
+#else
+
+#define INT_USB_IRQ_GEN		INT_24XX_USB_IRQ_GEN
+#define INT_USB_IRQ_NISO	INT_24XX_USB_IRQ_NISO
+#define INT_USB_IRQ_ISO		INT_24XX_USB_IRQ_ISO
+#define INT_USB_IRQ_HGEN	INT_24XX_USB_IRQ_HGEN
+#define INT_USB_IRQ_OTG		INT_24XX_USB_IRQ_OTG
+
+#endif
+
+
 /* These routines should handle the standard chip-specific modes
  * for usb0/1/2 ports, covering basic mux and transceiver setup.
- * Call omap_usb_init() once, from INIT_MACHINE().
  *
  * Some board-*.c files will need to set up additional mux options,
  * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup.
@@ -96,19 +114,26 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
 {
 	u32	syscon1 = 0;
 
+	if (cpu_is_omap24xx())
+		CONTROL_DEVCONF_REG &= ~USBT0WRMODEI(USB_BIDIR_TLL);
+
 	if (nwires == 0) {
-		if (!cpu_is_omap15xx()) {
+		if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
 			/* pulldown D+/D- */
 			USB_TRANSCEIVER_CTRL_REG &= ~(3 << 1);
 		}
 		return 0;
 	}
 
-	if (is_device)
-		omap_cfg_reg(W4_USB_PUEN);
+	if (is_device) {
+		if (cpu_is_omap24xx())
+			omap_cfg_reg(J20_24XX_USB0_PUEN);
+		else
+			omap_cfg_reg(W4_USB_PUEN);
+	}
 
-	/* internal transceiver */
-	if (nwires == 2) {
+	/* internal transceiver (unavailable on 17xx, 24xx) */
+	if (!cpu_class_is_omap2() && nwires == 2) {
 		// omap_cfg_reg(P9_USB_DP);
 		// omap_cfg_reg(R8_USB_DM);
 
@@ -136,29 +161,50 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
 		return 0;
 	}
 
-	omap_cfg_reg(V6_USB0_TXD);
-	omap_cfg_reg(W9_USB0_TXEN);
-	omap_cfg_reg(W5_USB0_SE0);
+	if (cpu_is_omap24xx()) {
+		omap_cfg_reg(K18_24XX_USB0_DAT);
+		omap_cfg_reg(K19_24XX_USB0_TXEN);
+		omap_cfg_reg(J14_24XX_USB0_SE0);
+		if (nwires != 3)
+			omap_cfg_reg(J18_24XX_USB0_RCV);
+	} else {
+		omap_cfg_reg(V6_USB0_TXD);
+		omap_cfg_reg(W9_USB0_TXEN);
+		omap_cfg_reg(W5_USB0_SE0);
+		if (nwires != 3)
+			omap_cfg_reg(Y5_USB0_RCV);
+	}
 
-	/* NOTE:  SPEED and SUSP aren't configured here */
+	/* NOTE:  SPEED and SUSP aren't configured here.  OTG hosts
+	 * may be able to use I2C requests to set those bits along
+	 * with VBUS switching and overcurrent detction.
+	 */
 
-	if (nwires != 3)
-		omap_cfg_reg(Y5_USB0_RCV);
-	if (nwires != 6)
+	if (cpu_class_is_omap1() && nwires != 6)
 		USB_TRANSCEIVER_CTRL_REG &= ~CONF_USB2_UNI_R;
 
 	switch (nwires) {
 	case 3:
 		syscon1 = 2;
+		if (cpu_is_omap24xx())
+			CONTROL_DEVCONF_REG |= USBT0WRMODEI(USB_BIDIR);
 		break;
 	case 4:
 		syscon1 = 1;
+		if (cpu_is_omap24xx())
+			CONTROL_DEVCONF_REG |= USBT0WRMODEI(USB_BIDIR);
 		break;
 	case 6:
 		syscon1 = 3;
-		omap_cfg_reg(AA9_USB0_VP);
-		omap_cfg_reg(R9_USB0_VM);
-		USB_TRANSCEIVER_CTRL_REG |= CONF_USB2_UNI_R;
+		if (cpu_is_omap24xx()) {
+			omap_cfg_reg(J19_24XX_USB0_VP);
+			omap_cfg_reg(K20_24XX_USB0_VM);
+			CONTROL_DEVCONF_REG |= USBT0WRMODEI(USB_UNIDIR);
+		} else {
+			omap_cfg_reg(AA9_USB0_VP);
+			omap_cfg_reg(R9_USB0_VM);
+			USB_TRANSCEIVER_CTRL_REG |= CONF_USB2_UNI_R;
+		}
 		break;
 	default:
 		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
@@ -171,14 +217,22 @@ static u32 __init omap_usb1_init(unsigned nwires)
 {
 	u32	syscon1 = 0;
 
-	if (nwires != 6 && !cpu_is_omap15xx())
+	if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6)
 		USB_TRANSCEIVER_CTRL_REG &= ~CONF_USB1_UNI_R;
+	if (cpu_is_omap24xx())
+		CONTROL_DEVCONF_REG &= ~USBT1WRMODEI(USB_BIDIR_TLL);
+
 	if (nwires == 0)
 		return 0;
 
 	/* external transceiver */
-	omap_cfg_reg(USB1_TXD);
-	omap_cfg_reg(USB1_TXEN);
+	if (cpu_class_is_omap1()) {
+		omap_cfg_reg(USB1_TXD);
+		omap_cfg_reg(USB1_TXEN);
+		if (nwires != 3)
+			omap_cfg_reg(USB1_RCV);
+	}
+
 	if (cpu_is_omap15xx()) {
 		omap_cfg_reg(USB1_SEO);
 		omap_cfg_reg(USB1_SPEED);
@@ -190,20 +244,38 @@ static u32 __init omap_usb1_init(unsigned nwires)
 	} else if (cpu_is_omap1710()) {
 		omap_cfg_reg(R13_1710_USB1_SE0);
 		// SUSP
+	} else if (cpu_is_omap24xx()) {
+		/* NOTE:  board-specific code must set up pin muxing for usb1,
+		 * since each signal could come out on either of two balls.
+		 */
 	} else {
-		pr_debug("usb unrecognized\n");
+		pr_debug("usb%d cpu unrecognized\n", 1);
+		return 0;
 	}
-	if (nwires != 3)
-		omap_cfg_reg(USB1_RCV);
 
 	switch (nwires) {
+	case 2:
+		if (!cpu_is_omap24xx())
+			goto bad;
+		/* NOTE: board-specific code must override this setting if
+		 * this TLL link is not using DP/DM
+		 */
+		syscon1 = 1;
+		CONTROL_DEVCONF_REG |= USBT1WRMODEI(USB_BIDIR_TLL);
+		break;
 	case 3:
 		syscon1 = 2;
+		if (cpu_is_omap24xx())
+			CONTROL_DEVCONF_REG |= USBT1WRMODEI(USB_BIDIR);
 		break;
 	case 4:
 		syscon1 = 1;
+		if (cpu_is_omap24xx())
+			CONTROL_DEVCONF_REG |= USBT1WRMODEI(USB_BIDIR);
 		break;
 	case 6:
+		if (cpu_is_omap24xx())
+			goto bad;
 		syscon1 = 3;
 		omap_cfg_reg(USB1_VP);
 		omap_cfg_reg(USB1_VM);
@@ -211,6 +283,7 @@ static u32 __init omap_usb1_init(unsigned nwires)
 			USB_TRANSCEIVER_CTRL_REG |= CONF_USB1_UNI_R;
 		break;
 	default:
+bad:
 		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
 			1, nwires);
 	}
@@ -221,10 +294,17 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
 {
 	u32	syscon1 = 0;
 
-	/* NOTE erratum: must leave USB2_UNI_R set if usb0 in use */
+	if (cpu_is_omap24xx()) {
+		CONTROL_DEVCONF_REG &= ~(USBT2WRMODEI(USB_BIDIR_TLL)
+					| USBT2TLL5PI);
+		alt_pingroup = 0;
+	}
+
+	/* NOTE omap1 erratum: must leave USB2_UNI_R set if usb0 in use */
 	if (alt_pingroup || nwires == 0)
 		return 0;
-	if (nwires != 6 && !cpu_is_omap15xx())
+
+	if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6)
 		USB_TRANSCEIVER_CTRL_REG &= ~CONF_USB2_UNI_R;
 
 	/* external transceiver */
@@ -242,19 +322,54 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
 		if (nwires != 3)
 			omap_cfg_reg(Y5_USB2_RCV);
 		// FIXME omap_cfg_reg(USB2_SPEED);
+	} else if (cpu_is_omap24xx()) {
+		omap_cfg_reg(Y11_24XX_USB2_DAT);
+		omap_cfg_reg(AA10_24XX_USB2_SE0);
+		if (nwires > 2)
+			omap_cfg_reg(AA12_24XX_USB2_TXEN);
+		if (nwires > 3)
+			omap_cfg_reg(AA6_24XX_USB2_RCV);
 	} else {
-		pr_debug("usb unrecognized\n");
+		pr_debug("usb%d cpu unrecognized\n", 1);
+		return 0;
 	}
-	// omap_cfg_reg(USB2_SUSP);
+	// if (cpu_class_is_omap1()) omap_cfg_reg(USB2_SUSP);
 
 	switch (nwires) {
+	case 2:
+		if (!cpu_is_omap24xx())
+			goto bad;
+		/* NOTE: board-specific code must override this setting if
+		 * this TLL link is not using DP/DM
+		 */
+		syscon1 = 1;
+		CONTROL_DEVCONF_REG |= USBT2WRMODEI(USB_BIDIR_TLL);
+		break;
 	case 3:
 		syscon1 = 2;
+		if (cpu_is_omap24xx())
+			CONTROL_DEVCONF_REG |= USBT2WRMODEI(USB_BIDIR);
 		break;
 	case 4:
 		syscon1 = 1;
+		if (cpu_is_omap24xx())
+			CONTROL_DEVCONF_REG |= USBT2WRMODEI(USB_BIDIR);
+		break;
+	case 5:
+		if (!cpu_is_omap24xx())
+			goto bad;
+		omap_cfg_reg(AA4_24XX_USB2_TLLSE0);
+		/* NOTE: board-specific code must override this setting if
+		 * this TLL link is not using DP/DM.  Something must also
+		 * set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED}
+		 */
+		syscon1 = 3;
+		CONTROL_DEVCONF_REG |= USBT2WRMODEI(USB_UNIDIR_TLL)
+					| USBT2TLL5PI;
 		break;
 	case 6:
+		if (cpu_is_omap24xx())
+			goto bad;
 		syscon1 = 3;
 		if (cpu_is_omap15xx()) {
 			omap_cfg_reg(USB2_VP);
@@ -266,6 +381,7 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
 		}
 		break;
 	default:
+bad:
 		printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
 			2, nwires);
 	}
@@ -294,13 +410,13 @@ static struct resource udc_resources[] = {
 		.end		= UDC_BASE + 0xff,
 		.flags		= IORESOURCE_MEM,
 	}, {		/* general IRQ */
-		.start		= IH2_BASE + 20,
+		.start		= INT_USB_IRQ_GEN,
 		.flags		= IORESOURCE_IRQ,
 	}, {		/* PIO IRQ */
-		.start		= IH2_BASE + 30,
+		.start		= INT_USB_IRQ_NISO,
 		.flags		= IORESOURCE_IRQ,
 	}, {		/* SOF IRQ */
-		.start		= IH2_BASE + 29,
+		.start		= INT_USB_IRQ_ISO,
 		.flags		= IORESOURCE_IRQ,
 	},
 };
@@ -329,11 +445,11 @@ static u64 ohci_dmamask = ~(u32)0;
 static struct resource ohci_resources[] = {
 	{
 		.start	= OMAP_OHCI_BASE,
-		.end	= OMAP_OHCI_BASE + 4096 - 1,
+		.end	= OMAP_OHCI_BASE + 0xff,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= INT_USB_HHC_1,
+		.start	= INT_USB_IRQ_HGEN,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -361,7 +477,7 @@ static struct resource otg_resources[] = {
 		.end		= OTG_BASE + 0xff,
 		.flags		= IORESOURCE_MEM,
 	}, {
-		.start		= IH2_BASE + 8,
+		.start		= INT_USB_IRQ_OTG,
 		.flags		= IORESOURCE_IRQ,
 	},
 };
@@ -385,7 +501,7 @@ static struct platform_device otg_device = {
 
 
 // FIXME correct answer depends on hmc_mode,
-// as does any nonzero value for config->otg port number
+// as does (on omap1) any nonzero value for config->otg port number
 #ifdef	CONFIG_USB_GADGET_OMAP
 #define	is_usb0_device(config)	1
 #else
@@ -426,12 +542,13 @@ omap_otg_init(struct omap_usb_config *config)
 	if (config->otg)
 		syscon |= OTG_EN;
 #endif
-	pr_debug("USB_TRANSCEIVER_CTRL_REG = %03x\n", USB_TRANSCEIVER_CTRL_REG);
+	if (cpu_class_is_omap1())
+		pr_debug("USB_TRANSCEIVER_CTRL_REG = %03x\n", USB_TRANSCEIVER_CTRL_REG);
 	pr_debug("OTG_SYSCON_2_REG = %08x\n", syscon);
 	OTG_SYSCON_2_REG = syscon;
 
 	printk("USB: hmc %d", config->hmc_mode);
-	if (alt_pingroup)
+	if (!alt_pingroup)
 		printk(", usb2 alt %d wires", config->pins[2]);
 	else if (config->pins[0])
 		printk(", usb0 %d wires%s", config->pins[0],
@@ -444,10 +561,12 @@ omap_otg_init(struct omap_usb_config *config)
 		printk(", Mini-AB on usb%d", config->otg - 1);
 	printk("\n");
 
-	/* leave USB clocks/controllers off until needed */
-	ULPD_SOFT_REQ_REG &= ~SOFT_USB_CLK_REQ;
-	ULPD_CLOCK_CTRL_REG &= ~USB_MCLK_EN;
-	ULPD_CLOCK_CTRL_REG |= DIS_USB_PVCI_CLK;
+	if (cpu_class_is_omap1()) {
+		/* leave USB clocks/controllers off until needed */
+		ULPD_SOFT_REQ_REG &= ~SOFT_USB_CLK_REQ;
+		ULPD_CLOCK_CTRL_REG &= ~USB_MCLK_EN;
+		ULPD_CLOCK_CTRL_REG |= DIS_USB_PVCI_CLK;
+	}
 	syscon = OTG_SYSCON_1_REG;
 	syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN;
 
@@ -585,7 +704,7 @@ omap_usb_init(void)
 	}
 	platform_data = *config;
 
-	if (cpu_is_omap730() || cpu_is_omap16xx())
+	if (cpu_is_omap730() || cpu_is_omap16xx() || cpu_is_omap24xx())
 		omap_otg_init(&platform_data);
 	else if (cpu_is_omap15xx())
 		omap_1510_usb_init(&platform_data);