Merge tag 's5pv210-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc

Merge "Samsung S5PV210 DT support for v3.17" from Kukjin Kim:

- support common clock framework for s5pv210 clock
- add generic PHY driver on s5pv210 to support it via DT
- add dt support for s5pv210-goni, smdkc110, smdkv210 and torbreck boards
- remove board files from mach-s5pv210 and unused codes
- enable multiplatform for s5pv210

* tag 's5pv210-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  clk: samsung: s5pv210: Remove legacy board support
  ARM: SAMSUNG: Remove remaining legacy code
  gpio: samsung: Remove legacy support of S5PV210
  ARM: S5PV210: Enable multi-platform build support
  cpufreq: s5pv210: Make the driver multiplatform aware
  ARM: S5PV210: Register cpufreq platform device
  ARM: S5PV210: move debug-macro.S into the common space
  ARM: S5PV210: Untie PM support from legacy code
  ARM: S5PV210: Remove support for board files
  ARM: dts: Add Device tree for s5pc110/s5pv210 boards
  ARM: dts: Add Device tree for s5pv210 SoC
  ARM: S5PV210: Add board file for boot using Device Tree
  phy: Add support for S5PV210 to the Exynos USB 2.0 PHY driver
  clk: samsung: Add S5PV210 Audio Subsystem clock driver
  ARM: SAMSUNG: Remove legacy clock code
  serial: samsung: Remove support for legacy clock code
  cpufreq: s3c24xx: Remove some dead code
  ARM: S5PV210: Migrate clock handling to Common Clock Framework
  clk: samsung: Add clock driver for S5PV210 and compatible SoCs

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

17 files changed, 0 insertions, 1075 deletions

diff --git a/arch/arm/plat-samsung/include/plat/camport.h b/arch/arm/plat-samsung/include/plat/camport.h
deleted file mode 100644
index a5708bf84b3a..000000000000
--- a/arch/arm/plat-samsung/include/plat/camport.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- *
- * S5P series camera interface helper functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __PLAT_SAMSUNG_CAMPORT_H_
-#define __PLAT_SAMSUNG_CAMPORT_H_ __FILE__
-
-enum s5p_camport_id {
-	S5P_CAMPORT_A,
-	S5P_CAMPORT_B,
-};
-
-/*
- * The helper functions to configure GPIO for the camera parallel bus.
- * The camera port can be multiplexed with any FIMC entity, even multiple
- * FIMC entities are allowed to be attached to a single port simultaneously.
- * These functions are to be used in the board setup code.
- */
-int s5pv210_fimc_setup_gpio(enum s5p_camport_id id);
-int exynos4_fimc_setup_gpio(enum s5p_camport_id id);
-
-#endif /* __PLAT_SAMSUNG_CAMPORT_H */
diff --git a/arch/arm/plat-samsung/include/plat/clock-clksrc.h b/arch/arm/plat-samsung/include/plat/clock-clksrc.h
deleted file mode 100644
index 50a8ca7c3760..000000000000
--- a/arch/arm/plat-samsung/include/plat/clock-clksrc.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/clock-clksrc.h
- *
- * Parts taken from arch/arm/plat-s3c64xx/clock.c
- *	Copyright 2008 Openmoko, Inc.
- *	Copyright 2008 Simtec Electronics
- *		Ben Dooks <ben@simtec.co.uk>
- *		http://armlinux.simtec.co.uk/
- *
- * Copyright 2009 Ben Dooks <ben-linux@fluff.org>
- * Copyright 2009 Harald Welte
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/**
- * struct clksrc_sources - list of sources for a given clock
- * @sources: array of pointers to clocks
- * @nr_sources: The size of @sources
- */
-struct clksrc_sources {
-	unsigned int	nr_sources;
-	struct clk	**sources;
-};
-
-/**
- * struct clksrc_reg - register definition for clock control bits
- * @reg: pointer to the register in virtual memory.
- * @shift: the shift in bits to where the bitfield is.
- * @size: the size in bits of the bitfield.
- *
- * This specifies the size and position of the bits we are interested
- * in within the register specified by @reg.
- */
-struct clksrc_reg {
-	void __iomem		*reg;
-	unsigned short		shift;
-	unsigned short		size;
-};
-
-/**
- * struct clksrc_clk - class of clock for newer style samsung devices.
- * @clk: the standard clock representation
- * @sources: the sources for this clock
- * @reg_src: the register definition for selecting the clock's source
- * @reg_div: the register definition for the clock's output divisor
- *
- * This clock implements the features required by the newer SoCs where
- * the standard clock block provides an input mux and a post-mux divisor
- * to provide the periperhal's clock.
- *
- * The array of @sources provides the mapping of mux position to the
- * clock, and @reg_src shows the code where to modify to change the mux
- * position. The @reg_div defines how to change the divider settings on
- * the output.
- */
-struct clksrc_clk {
-	struct clk		clk;
-	struct clksrc_sources	*sources;
-
-	struct clksrc_reg	reg_src;
-	struct clksrc_reg	reg_div;
-};
-
-/**
- * s3c_set_clksrc() - setup the clock from the register settings
- * @clk: The clock to setup.
- * @announce: true to announce the setting to printk().
- *
- * Setup the clock from the current register settings, for when the
- * kernel boots or if it is resuming from a possibly unknown state.
- */
-extern void s3c_set_clksrc(struct clksrc_clk *clk, bool announce);
-
-/**
- * s3c_register_clksrc() register clocks from an array of clksrc clocks
- * @srcs: The array of clocks to register
- * @size: The size of the @srcs array.
- *
- * Initialise and register the array of clocks described by @srcs.
- */
-extern void s3c_register_clksrc(struct clksrc_clk *srcs, int size);
diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h
deleted file mode 100644
index 63239f409807..000000000000
--- a/arch/arm/plat-samsung/include/plat/clock.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/* linux/arch/arm/plat-s3c/include/plat/clock.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/SWLINUX/
- *	Written by Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_CLOCK_H
-#define __ASM_PLAT_CLOCK_H __FILE__
-
-#include <linux/spinlock.h>
-#include <linux/clkdev.h>
-
-struct clk;
-
-/**
- * struct clk_ops - standard clock operations
- * @set_rate: set the clock rate, see clk_set_rate().
- * @get_rate: get the clock rate, see clk_get_rate().
- * @round_rate: round a given clock rate, see clk_round_rate().
- * @set_parent: set the clock's parent, see clk_set_parent().
- *
- * Group the common clock implementations together so that we
- * don't have to keep setting the same fields again. We leave
- * enable in struct clk.
- *
- * Adding an extra layer of indirection into the process should
- * not be a problem as it is unlikely these operations are going
- * to need to be called quickly.
- */
-struct clk_ops {
-	int		    (*set_rate)(struct clk *c, unsigned long rate);
-	unsigned long	    (*get_rate)(struct clk *c);
-	unsigned long	    (*round_rate)(struct clk *c, unsigned long rate);
-	int		    (*set_parent)(struct clk *c, struct clk *parent);
-};
-
-struct clk {
-	struct list_head      list;
-	struct module        *owner;
-	struct clk           *parent;
-	const char           *name;
-	const char		*devname;
-	int		      id;
-	int		      usage;
-	unsigned long         rate;
-	unsigned long         ctrlbit;
-
-	struct clk_ops		*ops;
-	int		    (*enable)(struct clk *, int enable);
-	struct clk_lookup	lookup;
-#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
-	struct dentry		*dent;	/* For visible tree hierarchy */
-#endif
-};
-
-/* other clocks which may be registered by board support */
-
-extern struct clk s3c24xx_dclk0;
-extern struct clk s3c24xx_dclk1;
-extern struct clk s3c24xx_clkout0;
-extern struct clk s3c24xx_clkout1;
-extern struct clk s3c24xx_uclk;
-
-extern struct clk clk_usb_bus;
-
-/* core clock support */
-
-extern struct clk clk_f;
-extern struct clk clk_h;
-extern struct clk clk_p;
-extern struct clk clk_mpll;
-extern struct clk clk_upll;
-extern struct clk clk_epll;
-extern struct clk clk_xtal;
-extern struct clk clk_ext;
-
-/* S3C2443/S3C2416 specific clocks */
-extern struct clksrc_clk clk_epllref;
-extern struct clksrc_clk clk_esysclk;
-
-/* S3C24XX UART clocks */
-extern struct clk s3c24xx_clk_uart0;
-extern struct clk s3c24xx_clk_uart1;
-extern struct clk s3c24xx_clk_uart2;
-
-/* S3C64XX specific clocks */
-extern struct clk clk_h2;
-extern struct clk clk_27m;
-extern struct clk clk_48m;
-extern struct clk clk_xusbxti;
-
-extern int clk_default_setrate(struct clk *clk, unsigned long rate);
-extern struct clk_ops clk_ops_def_setrate;
-
-/* exports for arch/arm/mach-s3c2410
- *
- * Please DO NOT use these outside of arch/arm/mach-s3c2410
-*/
-
-extern spinlock_t clocks_lock;
-
-extern int s3c2410_clkcon_enable(struct clk *clk, int enable);
-
-extern int s3c24xx_register_clock(struct clk *clk);
-extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks);
-
-extern void s3c_register_clocks(struct clk *clk, int nr_clks);
-extern void s3c_disable_clocks(struct clk *clkp, int nr_clks);
-
-extern int s3c24xx_register_baseclocks(unsigned long xtal);
-
-extern void s5p_register_clocks(unsigned long xtal_freq);
-
-extern void s3c24xx_setup_clocks(unsigned long fclk,
-				 unsigned long hclk,
-				 unsigned long pclk);
-
-extern void s3c2410_setup_clocks(void);
-extern void s3c2412_setup_clocks(void);
-extern void s3c244x_setup_clocks(void);
-
-/* S3C2410 specific clock functions */
-
-extern int s3c2410_baseclk_add(void);
-
-/* S3C2443/S3C2416 specific clock functions */
-
-typedef unsigned int (*pll_fn)(unsigned int reg, unsigned int base);
-
-extern void s3c2443_common_setup_clocks(pll_fn get_mpll);
-extern void s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
-				       unsigned int *divs, int nr_divs,
-				       int divmask);
-
-extern int s3c2443_clkcon_enable_h(struct clk *clk, int enable);
-extern int s3c2443_clkcon_enable_p(struct clk *clk, int enable);
-extern int s3c2443_clkcon_enable_s(struct clk *clk, int enable);
-
-/* S3C64XX specific functions and clocks */
-
-extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable);
-
-/* Global watchdog clock used by arch_wtd_reset() callback */
-
-extern struct clk *s3c2410_wdtclk;
-
-#endif /* __ASM_PLAT_CLOCK_H */
diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
index 72d4178ad23b..317c52303288 100644
--- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
@@ -140,7 +140,6 @@ struct s3c_cpufreq_config {
  *	any frequency changes. This is really only need by devices like the
  *	S3C2410 where there is no or limited divider between the PLL and the
  *	ARMCLK.
- * @resume_clocks: Update the clocks on resume.
  * @get_iotiming: Get the current IO timing data, mainly for use at start.
  * @set_iotiming: Update the IO timings from the cached copies calculated
  *	from the @calc_iotiming entry when changing the frequency.
@@ -169,8 +168,6 @@ struct s3c_cpufreq_info {
 
 	/* driver routines */
 
-	void		(*resume_clocks)(void);
-
 	int		(*get_iotiming)(struct s3c_cpufreq_config *cfg,
 					struct s3c_iotimings *timings);
 
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index d1d4659025bb..61d14f3a0426 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -47,7 +47,6 @@ IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
 IS_SAMSUNG_CPU(s3c2412, S3C2412_CPU_ID, S3C2412_CPU_MASK)
 IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK)
 IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK)
-IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
 
 #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
     defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
@@ -76,12 +75,6 @@ IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
 # define soc_is_s3c64xx()	0
 #endif
 
-#if defined(CONFIG_CPU_S5PV210)
-# define soc_is_s5pv210()	is_samsung_s5pv210()
-#else
-# define soc_is_s5pv210()	0
-#endif
-
 #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
 
 #ifndef KHZ
@@ -117,12 +110,9 @@ extern void s3c_init_cpu(unsigned long idcode,
 
 /* core initialisation functions */
 
-extern void s5p_init_irq(u32 *vic, u32 num_vic);
-
 extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
 
 extern void s3c64xx_init_cpu(void);
-extern void s5p_init_cpu(void __iomem *cpuid_addr);
 
 extern unsigned int samsung_rev(void);
 
@@ -149,8 +139,5 @@ extern struct bus_type s3c2440_subsys;
 extern struct bus_type s3c2442_subsys;
 extern struct bus_type s3c2443_subsys;
 extern struct bus_type s3c6410_subsys;
-extern struct bus_type s5pv210_subsys;
-
-extern void (*s5pc1xx_idle)(void);
 
 #endif
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 5f5a28d08c2e..e23fed311e5f 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -25,9 +25,6 @@ struct s3c24xx_uart_resources {
 
 extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
 extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
-extern struct s3c24xx_uart_resources s5p_uart_resources[];
-extern struct s3c24xx_uart_resources exynos4_uart_resources[];
-extern struct s3c24xx_uart_resources exynos5_uart_resources[];
 
 extern struct platform_device *s3c24xx_uart_devs[];
 extern struct platform_device *s3c24xx_uart_src[];
@@ -75,45 +72,6 @@ extern struct platform_device s3c_device_usb_hsotg;
 extern struct platform_device s3c_device_usb_hsudc;
 extern struct platform_device s3c_device_wdt;
 
-extern struct platform_device s5p_device_fimc0;
-extern struct platform_device s5p_device_fimc1;
-extern struct platform_device s5p_device_fimc2;
-extern struct platform_device s5p_device_fimc3;
-extern struct platform_device s5p_device_fimc_md;
-extern struct platform_device s5p_device_jpeg;
-extern struct platform_device s5p_device_g2d;
-extern struct platform_device s5p_device_fimd0;
-extern struct platform_device s5p_device_hdmi;
-extern struct platform_device s5p_device_i2c_hdmiphy;
-extern struct platform_device s5p_device_mfc;
-extern struct platform_device s5p_device_mfc_l;
-extern struct platform_device s5p_device_mfc_r;
-extern struct platform_device s5p_device_mipi_csis0;
-extern struct platform_device s5p_device_mipi_csis1;
-extern struct platform_device s5p_device_mixer;
-extern struct platform_device s5p_device_onenand;
-extern struct platform_device s5p_device_sdo;
-
-extern struct platform_device s5pv210_device_ac97;
-extern struct platform_device s5pv210_device_iis0;
-extern struct platform_device s5pv210_device_iis1;
-extern struct platform_device s5pv210_device_iis2;
-extern struct platform_device s5pv210_device_pcm0;
-extern struct platform_device s5pv210_device_pcm1;
-extern struct platform_device s5pv210_device_pcm2;
-extern struct platform_device s5pv210_device_spdif;
-
-extern struct platform_device exynos4_device_ac97;
-extern struct platform_device exynos4_device_ahci;
-extern struct platform_device exynos4_device_i2s0;
-extern struct platform_device exynos4_device_i2s1;
-extern struct platform_device exynos4_device_i2s2;
-extern struct platform_device exynos4_device_ohci;
-extern struct platform_device exynos4_device_pcm0;
-extern struct platform_device exynos4_device_pcm1;
-extern struct platform_device exynos4_device_pcm2;
-extern struct platform_device exynos4_device_spdif;
-
 extern struct platform_device samsung_asoc_idma;
 extern struct platform_device samsung_device_keypad;
 extern struct platform_device samsung_device_pwm;
diff --git a/arch/arm/plat-samsung/include/plat/fb-core.h b/arch/arm/plat-samsung/include/plat/fb-core.h
index 6abcbf139cee..bca383efcf6d 100644
--- a/arch/arm/plat-samsung/include/plat/fb-core.h
+++ b/arch/arm/plat-samsung/include/plat/fb-core.h
@@ -26,19 +26,4 @@ static inline void s3c_fb_setname(char *name)
 #endif
 }
 
-/* Re-define device name depending on support. */
-static inline void s5p_fb_setname(int id, char *name)
-{
-	switch (id) {
-#ifdef CONFIG_S5P_DEV_FIMD0
-	case 0:
-		s5p_device_fimd0.name = name;
-	break;
-#endif
-	default:
-		printk(KERN_ERR "%s: invalid device id(%d)\n", __func__, id);
-	break;
-	}
-}
-
 #endif /* __ASM_PLAT_FB_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h
index 5a0e26afb961..b89f8f208515 100644
--- a/arch/arm/plat-samsung/include/plat/fb.h
+++ b/arch/arm/plat-samsung/include/plat/fb.h
@@ -26,32 +26,10 @@
 extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd);
 
 /**
- * s5p_fimd0_set_platdata() - Setup the FB device with platform data.
- * @pd: The platform data to set. The data is copied from the passed structure
- *      so the machine data can mark the data __initdata so that any unused
- *      machines will end up dumping their data at runtime.
- */
-extern void s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd);
-
-/**
  * s3c64xx_fb_gpio_setup_24bpp() - S3C64XX setup function for 24bpp LCD
  *
  * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
  */
 extern void s3c64xx_fb_gpio_setup_24bpp(void);
 
-/**
- * s5pv210_fb_gpio_setup_24bpp() - S5PV210/S5PC110 setup function for 24bpp LCD
- *
- * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
- */
-extern void s5pv210_fb_gpio_setup_24bpp(void);
-
-/**
- * exynos4_fimd0_gpio_setup_24bpp() - Exynos4 setup function for 24bpp LCD0
- *
- * Initialise the GPIO for an 24bpp LCD display on the RGB interface 0.
- */
-extern void exynos4_fimd0_gpio_setup_24bpp(void);
-
 #endif /* __PLAT_S3C_FB_H */
diff --git a/arch/arm/plat-samsung/include/plat/fimc-core.h b/arch/arm/plat-samsung/include/plat/fimc-core.h
deleted file mode 100644
index 1d6cb2b8b094..000000000000
--- a/arch/arm/plat-samsung/include/plat/fimc-core.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * arch/arm/plat-samsung/include/plat/fimc-core.h
- *
- * Copyright 2010 Samsung Electronics Co., Ltd.
- *	Sylwester Nawrocki <s.nawrocki@samsung.com>
- *
- * Samsung camera interface driver core functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_PLAT_FIMC_CORE_H
-#define __ASM_PLAT_FIMC_CORE_H __FILE__
-
-/*
- * These functions are only for use with the core support code, such as
- * the CPU-specific initialization code.
- */
-
-/* Re-define device name to differentiate the subsystem in various SoCs. */
-static inline void s3c_fimc_setname(int id, char *name)
-{
-	switch (id) {
-#ifdef CONFIG_S5P_DEV_FIMC0
-	case 0:
-		s5p_device_fimc0.name = name;
-		break;
-#endif
-#ifdef CONFIG_S5P_DEV_FIMC1
-	case 1:
-		s5p_device_fimc1.name = name;
-		break;
-#endif
-#ifdef CONFIG_S5P_DEV_FIMC2
-	case 2:
-		s5p_device_fimc2.name = name;
-		break;
-#endif
-#ifdef CONFIG_S5P_DEV_FIMC3
-	case 3:
-		s5p_device_fimc3.name = name;
-		break;
-#endif
-	default:
-		break;
-	}
-}
-
-#endif /* __ASM_PLAT_FIMC_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index 08740eed050c..b5294eff18b5 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -27,7 +27,6 @@
 #include <linux/types.h>
 
 typedef unsigned int __bitwise__ samsung_gpio_pull_t;
-typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
 
 /* forward declaration if gpio-core.h hasn't been included */
 struct samsung_gpio_chip;
@@ -180,67 +179,4 @@ static inline int s3c_gpio_cfgrange_nopull(unsigned int pin, unsigned int size,
 	return s3c_gpio_cfgall_range(pin, size, cfg, S3C_GPIO_PULL_NONE);
 }
 
-/* Define values for the drvstr available for each gpio pin.
- *
- * These values control the value of the output signal driver strength,
- * configurable on most pins on the S5P series.
- */
-#define S5P_GPIO_DRVSTR_LV1	((__force s5p_gpio_drvstr_t)0x0)
-#define S5P_GPIO_DRVSTR_LV2	((__force s5p_gpio_drvstr_t)0x2)
-#define S5P_GPIO_DRVSTR_LV3	((__force s5p_gpio_drvstr_t)0x1)
-#define S5P_GPIO_DRVSTR_LV4	((__force s5p_gpio_drvstr_t)0x3)
-
-/**
- * s5c_gpio_get_drvstr() - get the driver streght value of a gpio pin
- * @pin: The pin number to get the settings for
- *
- * Read the driver streght value for the specified pin.
-*/
-extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin);
-
-/**
- * s3c_gpio_set_drvstr() - set the driver streght value of a gpio pin
- * @pin: The pin number to configure the driver streght value
- * @drvstr: The new value of the driver strength
- *
- * This function sets the driver strength value for the specified pin.
- * It will return 0 if successful, or a negative error code if the pin
- * cannot support the requested setting.
-*/
-extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr);
-
-/**
- * s5p_register_gpio_interrupt() - register interrupt support for a gpio group
- * @pin: The pin number from the group to be registered
- *
- * This function registers gpio interrupt support for the group that the
- * specified pin belongs to.
- *
- * The total number of gpio pins is quite large ob s5p series. Registering
- * irq support for all of them would be a resource waste. Because of that the
- * interrupt support for standard gpio pins is registered dynamically.
- *
- * It will return the irq number of the interrupt that has been registered
- * or -ENOMEM if no more gpio interrupts can be registered. It is allowed
- * to call this function more than once for the same gpio group (the group
- * will be registered only once).
- */
-extern int s5p_register_gpio_interrupt(int pin);
-
-/** s5p_register_gpioint_bank() - add gpio bank for further gpio interrupt
- * registration (see s5p_register_gpio_interrupt function)
- * @chain_irq: chained irq number for the gpio int handler for this bank
- * @start: start gpio group number of this bank
- * @nr_groups: number of gpio groups handled by this bank
- *
- * This functions registers initial information about gpio banks that
- * can be later used by the s5p_register_gpio_interrupt() function to
- * enable support for gpio interrupt for particular gpio group.
- */
-#ifdef CONFIG_S5P_GPIO_INT
-extern int s5p_register_gpioint_bank(int chain_irq, int start, int nr_groups);
-#else
-#define s5p_register_gpioint_bank(chain_irq, start, nr_groups) do { } while (0)
-#endif
-
 #endif /* __PLAT_GPIO_CFG_H */
diff --git a/arch/arm/plat-samsung/include/plat/hdmi.h b/arch/arm/plat-samsung/include/plat/hdmi.h
deleted file mode 100644
index 331d046ac2c5..000000000000
--- a/arch/arm/plat-samsung/include/plat/hdmi.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2012 Samsung Electronics Co.Ltd
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_SAMSUNG_HDMI_H
-#define __PLAT_SAMSUNG_HDMI_H __FILE__
-
-extern void s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
-				  struct i2c_board_info *mhl_info, int mhl_bus);
-
-#endif /* __PLAT_SAMSUNG_HDMI_H */
diff --git a/arch/arm/plat-samsung/include/plat/irqs.h b/arch/arm/plat-samsung/include/plat/irqs.h
deleted file mode 100644
index 039001c0ef05..000000000000
--- a/arch/arm/plat-samsung/include/plat/irqs.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/irqs.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5P Common IRQ support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_SAMSUNG_IRQS_H
-#define __PLAT_SAMSUNG_IRQS_H __FILE__
-
-/* we keep the first set of CPU IRQs out of the range of
- * the ISA space, so that the PC104 has them to itself
- * and we don't end up having to do horrible things to the
- * standard ISA drivers....
- *
- * note, since we're using the VICs, our start must be a
- * mulitple of 32 to allow the common code to work
- */
-
-#define S5P_IRQ_OFFSET		(32)
-
-#define S5P_IRQ(x)		((x) + S5P_IRQ_OFFSET)
-
-#define S5P_VIC0_BASE		S5P_IRQ(0)
-#define S5P_VIC1_BASE		S5P_IRQ(32)
-#define S5P_VIC2_BASE		S5P_IRQ(64)
-#define S5P_VIC3_BASE		S5P_IRQ(96)
-
-#define VIC_BASE(x)		(S5P_VIC0_BASE + ((x)*32))
-
-#define IRQ_VIC0_BASE		S5P_VIC0_BASE
-#define IRQ_VIC1_BASE		S5P_VIC1_BASE
-#define IRQ_VIC2_BASE		S5P_VIC2_BASE
-
-/* VIC based IRQs */
-
-#define S5P_IRQ_VIC0(x)		(S5P_VIC0_BASE + (x))
-#define S5P_IRQ_VIC1(x)		(S5P_VIC1_BASE + (x))
-#define S5P_IRQ_VIC2(x)		(S5P_VIC2_BASE + (x))
-#define S5P_IRQ_VIC3(x)		(S5P_VIC3_BASE + (x))
-
-#define IRQ_EINT(x)		((x) < 16 ? ((x) + S5P_EINT_BASE1) \
-					: ((x) - 16 + S5P_EINT_BASE2))
-
-#define EINT_OFFSET(irq)	((irq) < S5P_EINT_BASE2 ? \
-						((irq) - S5P_EINT_BASE1) : \
-						((irq) + 16 - S5P_EINT_BASE2))
-
-#define IRQ_EINT_BIT(x)		EINT_OFFSET(x)
-
-/* Typically only a few gpio chips require gpio interrupt support.
-   To avoid memory waste irq descriptors are allocated only for
-   S5P_GPIOINT_GROUP_COUNT chips, each with total number of
-   S5P_GPIOINT_GROUP_SIZE pins/irqs. Each GPIOINT group can be assiged
-   to any gpio chip with the s5p_register_gpio_interrupt() function */
-#define S5P_GPIOINT_GROUP_COUNT 4
-#define S5P_GPIOINT_GROUP_SIZE	8
-#define S5P_GPIOINT_COUNT	(S5P_GPIOINT_GROUP_COUNT * S5P_GPIOINT_GROUP_SIZE)
-
-/* IRQ types common for all s5p platforms */
-#define S5P_IRQ_TYPE_LEVEL_LOW		(0x00)
-#define S5P_IRQ_TYPE_LEVEL_HIGH		(0x01)
-#define S5P_IRQ_TYPE_EDGE_FALLING	(0x02)
-#define S5P_IRQ_TYPE_EDGE_RISING	(0x03)
-#define S5P_IRQ_TYPE_EDGE_BOTH		(0x04)
-
-#endif /* __PLAT_SAMSUNG_IRQS_H */
diff --git a/arch/arm/plat-samsung/include/plat/mfc.h b/arch/arm/plat-samsung/include/plat/mfc.h
deleted file mode 100644
index 033654e91e22..000000000000
--- a/arch/arm/plat-samsung/include/plat/mfc.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_SAMSUNG_MFC_H
-#define __PLAT_SAMSUNG_MFC_H __FILE__
-
-struct s5p_mfc_dt_meminfo {
-	unsigned long	loff;
-	unsigned long	lsize;
-	unsigned long	roff;
-	unsigned long	rsize;
-	char		*compatible;
-};
-
-/**
- * s5p_mfc_reserve_mem - function to early reserve memory for MFC driver
- * @rbase:	base address for MFC 'right' memory interface
- * @rsize:	size of the memory reserved for MFC 'right' interface
- * @lbase:	base address for MFC 'left' memory interface
- * @lsize:	size of the memory reserved for MFC 'left' interface
- *
- * This function reserves system memory for both MFC device memory
- * interfaces and registers it to respective struct device entries as
- * coherent memory.
- */
-void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
-				phys_addr_t lbase, unsigned int lsize);
-
-#endif /* __PLAT_SAMSUNG_MFC_H */
diff --git a/arch/arm/plat-samsung/include/plat/pll.h b/arch/arm/plat-samsung/include/plat/pll.h
deleted file mode 100644
index 357af7c1c664..000000000000
--- a/arch/arm/plat-samsung/include/plat/pll.h
+++ /dev/null
@@ -1,323 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/pll.h
- *
- * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * Samsung PLL codes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <asm/div64.h>
-
-#define S3C24XX_PLL_MDIV_MASK		(0xFF)
-#define S3C24XX_PLL_PDIV_MASK		(0x1F)
-#define S3C24XX_PLL_SDIV_MASK		(0x3)
-#define S3C24XX_PLL_MDIV_SHIFT		(12)
-#define S3C24XX_PLL_PDIV_SHIFT		(4)
-#define S3C24XX_PLL_SDIV_SHIFT		(0)
-
-static inline unsigned int s3c24xx_get_pll(unsigned int pllval,
-					   unsigned int baseclk)
-{
-	unsigned int mdiv, pdiv, sdiv;
-	uint64_t fvco;
-
-	mdiv = (pllval >> S3C24XX_PLL_MDIV_SHIFT) & S3C24XX_PLL_MDIV_MASK;
-	pdiv = (pllval >> S3C24XX_PLL_PDIV_SHIFT) & S3C24XX_PLL_PDIV_MASK;
-	sdiv = (pllval >> S3C24XX_PLL_SDIV_SHIFT) & S3C24XX_PLL_SDIV_MASK;
-
-	fvco = (uint64_t)baseclk * (mdiv + 8);
-	do_div(fvco, (pdiv + 2) << sdiv);
-
-	return (unsigned int)fvco;
-}
-
-#define S3C2416_PLL_MDIV_MASK		(0x3FF)
-#define S3C2416_PLL_PDIV_MASK		(0x3F)
-#define S3C2416_PLL_SDIV_MASK		(0x7)
-#define S3C2416_PLL_MDIV_SHIFT		(14)
-#define S3C2416_PLL_PDIV_SHIFT		(5)
-#define S3C2416_PLL_SDIV_SHIFT		(0)
-
-static inline unsigned int s3c2416_get_pll(unsigned int pllval,
-					   unsigned int baseclk)
-{
-	unsigned int mdiv, pdiv, sdiv;
-	uint64_t fvco;
-
-	mdiv = (pllval >> S3C2416_PLL_MDIV_SHIFT) & S3C2416_PLL_MDIV_MASK;
-	pdiv = (pllval >> S3C2416_PLL_PDIV_SHIFT) & S3C2416_PLL_PDIV_MASK;
-	sdiv = (pllval >> S3C2416_PLL_SDIV_SHIFT) & S3C2416_PLL_SDIV_MASK;
-
-	fvco = (uint64_t)baseclk * mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned int)fvco;
-}
-
-#define S3C6400_PLL_MDIV_MASK		(0x3FF)
-#define S3C6400_PLL_PDIV_MASK		(0x3F)
-#define S3C6400_PLL_SDIV_MASK		(0x7)
-#define S3C6400_PLL_MDIV_SHIFT		(16)
-#define S3C6400_PLL_PDIV_SHIFT		(8)
-#define S3C6400_PLL_SDIV_SHIFT		(0)
-
-static inline unsigned long s3c6400_get_pll(unsigned long baseclk,
-					    u32 pllcon)
-{
-	u32 mdiv, pdiv, sdiv;
-	u64 fvco = baseclk;
-
-	mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK;
-	pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK;
-	sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK;
-
-	fvco *= mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned long)fvco;
-}
-
-#define PLL6553X_MDIV_MASK	(0x7F)
-#define PLL6553X_PDIV_MASK	(0x1F)
-#define PLL6553X_SDIV_MASK	(0x3)
-#define PLL6553X_KDIV_MASK	(0xFFFF)
-#define PLL6553X_MDIV_SHIFT	(16)
-#define PLL6553X_PDIV_SHIFT	(8)
-#define PLL6553X_SDIV_SHIFT	(0)
-
-static inline unsigned long s3c_get_pll6553x(unsigned long baseclk,
-					     u32 pll_con0, u32 pll_con1)
-{
-	unsigned long result;
-	u32 mdiv, pdiv, sdiv, kdiv;
-	u64 tmp;
-
-	mdiv = (pll_con0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK;
-	pdiv = (pll_con0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK;
-	sdiv = (pll_con0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK;
-	kdiv = pll_con1 & PLL6553X_KDIV_MASK;
-
-	/*
-	 * We need to multiple baseclk by mdiv (the integer part) and kdiv
-	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
-	 * add kdiv before multiplying. The use of tmp is to avoid any
-	 * overflows before shifting bac down into result when multipling
-	 * by the mdiv and kdiv pair.
-	 */
-
-	tmp = baseclk;
-	tmp *= (mdiv << 16) + kdiv;
-	do_div(tmp, (pdiv << sdiv));
-	result = tmp >> 16;
-
-	return result;
-}
-
-#define PLL35XX_MDIV_MASK	(0x3FF)
-#define PLL35XX_PDIV_MASK	(0x3F)
-#define PLL35XX_SDIV_MASK	(0x7)
-#define PLL35XX_MDIV_SHIFT	(16)
-#define PLL35XX_PDIV_SHIFT	(8)
-#define PLL35XX_SDIV_SHIFT	(0)
-
-static inline unsigned long s5p_get_pll35xx(unsigned long baseclk, u32 pll_con)
-{
-	u32 mdiv, pdiv, sdiv;
-	u64 fvco = baseclk;
-
-	mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK;
-	pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK;
-	sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK;
-
-	fvco *= mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned long)fvco;
-}
-
-#define PLL36XX_KDIV_MASK	(0xFFFF)
-#define PLL36XX_MDIV_MASK	(0x1FF)
-#define PLL36XX_PDIV_MASK	(0x3F)
-#define PLL36XX_SDIV_MASK	(0x7)
-#define PLL36XX_MDIV_SHIFT	(16)
-#define PLL36XX_PDIV_SHIFT	(8)
-#define PLL36XX_SDIV_SHIFT	(0)
-
-static inline unsigned long s5p_get_pll36xx(unsigned long baseclk,
-					    u32 pll_con0, u32 pll_con1)
-{
-	unsigned long result;
-	u32 mdiv, pdiv, sdiv, kdiv;
-	u64 tmp;
-
-	mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK;
-	pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK;
-	sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK;
-	kdiv = pll_con1 & PLL36XX_KDIV_MASK;
-
-	tmp = baseclk;
-
-	tmp *= (mdiv << 16) + kdiv;
-	do_div(tmp, (pdiv << sdiv));
-	result = tmp >> 16;
-
-	return result;
-}
-
-#define PLL45XX_MDIV_MASK	(0x3FF)
-#define PLL45XX_PDIV_MASK	(0x3F)
-#define PLL45XX_SDIV_MASK	(0x7)
-#define PLL45XX_MDIV_SHIFT	(16)
-#define PLL45XX_PDIV_SHIFT	(8)
-#define PLL45XX_SDIV_SHIFT	(0)
-
-enum pll45xx_type_t {
-	pll_4500,
-	pll_4502,
-	pll_4508
-};
-
-static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con,
-					    enum pll45xx_type_t pll_type)
-{
-	u32 mdiv, pdiv, sdiv;
-	u64 fvco = baseclk;
-
-	mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK;
-	pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK;
-	sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK;
-
-	if (pll_type == pll_4508)
-		sdiv = sdiv - 1;
-
-	fvco *= mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned long)fvco;
-}
-
-/* CON0 bit-fields */
-#define PLL46XX_MDIV_MASK	(0x1FF)
-#define PLL46XX_PDIV_MASK	(0x3F)
-#define PLL46XX_SDIV_MASK	(0x7)
-#define PLL46XX_LOCKED_SHIFT	(29)
-#define PLL46XX_MDIV_SHIFT	(16)
-#define PLL46XX_PDIV_SHIFT	(8)
-#define PLL46XX_SDIV_SHIFT	(0)
-
-/* CON1 bit-fields */
-#define PLL46XX_MRR_MASK	(0x1F)
-#define PLL46XX_MFR_MASK	(0x3F)
-#define PLL46XX_KDIV_MASK	(0xFFFF)
-#define PLL4650C_KDIV_MASK	(0xFFF)
-#define PLL46XX_MRR_SHIFT	(24)
-#define PLL46XX_MFR_SHIFT	(16)
-#define PLL46XX_KDIV_SHIFT	(0)
-
-enum pll46xx_type_t {
-	pll_4600,
-	pll_4650,
-	pll_4650c,
-};
-
-static inline unsigned long s5p_get_pll46xx(unsigned long baseclk,
-					    u32 pll_con0, u32 pll_con1,
-					    enum pll46xx_type_t pll_type)
-{
-	unsigned long result;
-	u32 mdiv, pdiv, sdiv, kdiv;
-	u64 tmp;
-
-	mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK;
-	pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK;
-	sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK;
-	kdiv = pll_con1 & PLL46XX_KDIV_MASK;
-
-	if (pll_type == pll_4650c)
-		kdiv = pll_con1 & PLL4650C_KDIV_MASK;
-	else
-		kdiv = pll_con1 & PLL46XX_KDIV_MASK;
-
-	tmp = baseclk;
-
-	if (pll_type == pll_4600) {
-		tmp *= (mdiv << 16) + kdiv;
-		do_div(tmp, (pdiv << sdiv));
-		result = tmp >> 16;
-	} else {
-		tmp *= (mdiv << 10) + kdiv;
-		do_div(tmp, (pdiv << sdiv));
-		result = tmp >> 10;
-	}
-
-	return result;
-}
-
-#define PLL90XX_MDIV_MASK	(0xFF)
-#define PLL90XX_PDIV_MASK	(0x3F)
-#define PLL90XX_SDIV_MASK	(0x7)
-#define PLL90XX_KDIV_MASK	(0xffff)
-#define PLL90XX_LOCKED_SHIFT	(29)
-#define PLL90XX_MDIV_SHIFT	(16)
-#define PLL90XX_PDIV_SHIFT	(8)
-#define PLL90XX_SDIV_SHIFT	(0)
-#define PLL90XX_KDIV_SHIFT	(0)
-
-static inline unsigned long s5p_get_pll90xx(unsigned long baseclk,
-					    u32 pll_con, u32 pll_conk)
-{
-	unsigned long result;
-	u32 mdiv, pdiv, sdiv, kdiv;
-	u64 tmp;
-
-	mdiv = (pll_con >> PLL90XX_MDIV_SHIFT) & PLL90XX_MDIV_MASK;
-	pdiv = (pll_con >> PLL90XX_PDIV_SHIFT) & PLL90XX_PDIV_MASK;
-	sdiv = (pll_con >> PLL90XX_SDIV_SHIFT) & PLL90XX_SDIV_MASK;
-	kdiv = pll_conk & PLL90XX_KDIV_MASK;
-
-	/*
-	 * We need to multiple baseclk by mdiv (the integer part) and kdiv
-	 * which is in 2^16ths, so shift mdiv up (does not overflow) and
-	 * add kdiv before multiplying. The use of tmp is to avoid any
-	 * overflows before shifting bac down into result when multipling
-	 * by the mdiv and kdiv pair.
-	 */
-
-	tmp = baseclk;
-	tmp *= (mdiv << 16) + kdiv;
-	do_div(tmp, (pdiv << sdiv));
-	result = tmp >> 16;
-
-	return result;
-}
-
-#define PLL65XX_MDIV_MASK	(0x3FF)
-#define PLL65XX_PDIV_MASK	(0x3F)
-#define PLL65XX_SDIV_MASK	(0x7)
-#define PLL65XX_MDIV_SHIFT	(16)
-#define PLL65XX_PDIV_SHIFT	(8)
-#define PLL65XX_SDIV_SHIFT	(0)
-
-static inline unsigned long s5p_get_pll65xx(unsigned long baseclk, u32 pll_con)
-{
-	u32 mdiv, pdiv, sdiv;
-	u64 fvco = baseclk;
-
-	mdiv = (pll_con >> PLL65XX_MDIV_SHIFT) & PLL65XX_MDIV_MASK;
-	pdiv = (pll_con >> PLL65XX_PDIV_SHIFT) & PLL65XX_PDIV_MASK;
-	sdiv = (pll_con >> PLL65XX_SDIV_SHIFT) & PLL65XX_SDIV_MASK;
-
-	fvco *= mdiv;
-	do_div(fvco, (pdiv << sdiv));
-
-	return (unsigned long)fvco;
-}
diff --git a/arch/arm/plat-samsung/include/plat/s5p-clock.h b/arch/arm/plat-samsung/include/plat/s5p-clock.h
deleted file mode 100644
index acacc4b88a39..000000000000
--- a/arch/arm/plat-samsung/include/plat/s5p-clock.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s5p-clock.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Header file for s5p clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_CLOCK_H
-#define __ASM_PLAT_S5P_CLOCK_H __FILE__
-
-#include <linux/clk.h>
-
-#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
-
-#define clk_fin_apll clk_ext_xtal_mux
-#define clk_fin_bpll clk_ext_xtal_mux
-#define clk_fin_cpll clk_ext_xtal_mux
-#define clk_fin_mpll clk_ext_xtal_mux
-#define clk_fin_epll clk_ext_xtal_mux
-#define clk_fin_dpll clk_ext_xtal_mux
-#define clk_fin_vpll clk_ext_xtal_mux
-#define clk_fin_hpll clk_ext_xtal_mux
-
-extern struct clk clk_ext_xtal_mux;
-extern struct clk clk_xusbxti;
-extern struct clk clk_48m;
-extern struct clk s5p_clk_27m;
-extern struct clk clk_fout_apll;
-extern struct clk clk_fout_bpll;
-extern struct clk clk_fout_bpll_div2;
-extern struct clk clk_fout_cpll;
-extern struct clk clk_fout_mpll;
-extern struct clk clk_fout_mpll_div2;
-extern struct clk clk_fout_epll;
-extern struct clk clk_fout_dpll;
-extern struct clk clk_fout_vpll;
-extern struct clk clk_arm;
-extern struct clk clk_vpll;
-
-extern struct clksrc_sources clk_src_apll;
-extern struct clksrc_sources clk_src_bpll;
-extern struct clksrc_sources clk_src_bpll_fout;
-extern struct clksrc_sources clk_src_cpll;
-extern struct clksrc_sources clk_src_mpll;
-extern struct clksrc_sources clk_src_mpll_fout;
-extern struct clksrc_sources clk_src_epll;
-extern struct clksrc_sources clk_src_dpll;
-
-extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable);
-
-/* Common EPLL operations for S5P platform */
-extern int s5p_epll_enable(struct clk *clk, int enable);
-extern unsigned long s5p_epll_get_rate(struct clk *clk);
-
-/* SPDIF clk operations common for S5PV210/C110 and Exynos4 */
-extern int s5p_spdif_set_rate(struct clk *clk, unsigned long rate);
-extern unsigned long s5p_spdif_get_rate(struct clk *clk);
-
-extern struct clk_ops s5p_sclk_spdif_ops;
-#endif /* __ASM_PLAT_S5P_CLOCK_H */
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index f84b6cbc8745..2787553c3ae2 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -57,14 +57,6 @@ extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
 extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
 extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
 extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
-extern void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void exynos4_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-extern void exynos4_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
-extern void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
 
 /* S3C2416 SDHCI setup */
 
@@ -144,45 +136,6 @@ static inline void s3c6400_default_sdhci2(void) { }
 
 #endif /* CONFIG_S3C64XX_SETUP_SDHCI */
 
-/* S5PV210 SDHCI setup */
-
-#ifdef CONFIG_S5PV210_SETUP_SDHCI
-static inline void s5pv210_default_sdhci0(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC
-	s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio;
-#endif
-}
-
-static inline void s5pv210_default_sdhci1(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC1
-	s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio;
-#endif
-}
-
-static inline void s5pv210_default_sdhci2(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC2
-	s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio;
-#endif
-}
-
-static inline void s5pv210_default_sdhci3(void)
-{
-#ifdef CONFIG_S3C_DEV_HSMMC3
-	s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio;
-#endif
-}
-
-#else
-static inline void s5pv210_default_sdhci0(void) { }
-static inline void s5pv210_default_sdhci1(void) { }
-static inline void s5pv210_default_sdhci2(void) { }
-static inline void s5pv210_default_sdhci3(void) { }
-
-#endif /* CONFIG_S5PV210_SETUP_SDHCI */
-
 static inline void s3c_sdhci_setname(int id, char *name)
 {
 	switch (id) {
diff --git a/arch/arm/plat-samsung/include/plat/tv-core.h b/arch/arm/plat-samsung/include/plat/tv-core.h
deleted file mode 100644
index 3bc34f3ce28f..000000000000
--- a/arch/arm/plat-samsung/include/plat/tv-core.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * arch/arm/plat-samsung/include/plat/tv.h
- *
- * Copyright 2011 Samsung Electronics Co., Ltd.
- *	Tomasz Stanislawski <t.stanislaws@samsung.com>
- *
- * Samsung TV driver core functions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __SAMSUNG_PLAT_TV_H
-#define __SAMSUNG_PLAT_TV_H __FILE__
-
-/*
- * These functions are only for use with the core support code, such as
- * the CPU-specific initialization code.
- */
-
-/* Re-define device name to differentiate the subsystem in various SoCs. */
-static inline void s5p_hdmi_setname(char *name)
-{
-#ifdef CONFIG_S5P_DEV_TV
-	s5p_device_hdmi.name = name;
-#endif
-}
-
-static inline void s5p_mixer_setname(char *name)
-{
-#ifdef CONFIG_S5P_DEV_TV
-	s5p_device_mixer.name = name;
-#endif
-}
-
-static inline void s5p_sdo_setname(char *name)
-{
-#ifdef CONFIG_S5P_DEV_TV
-	s5p_device_sdo.name = name;
-#endif
-}
-
-#endif /* __SAMSUNG_PLAT_TV_H */