Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 716 insertions, 0 deletions

diff --git a/arch/arm26/kernel/irq.c b/arch/arm26/kernel/irq.c
new file mode 100644
index 000000000000..f3cc1036e5bc
--- /dev/null
+++ b/arch/arm26/kernel/irq.c
@@ -0,0 +1,716 @@
+/*
+ *  linux/arch/arm/kernel/irq.c
+ *
+ *  Copyright (C) 1992 Linus Torvalds
+ *  Modifications for ARM processor Copyright (C) 1995-2000 Russell King.
+ *  'Borrowed' for ARM26 and (C) 2003 Ian Molton.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file contains the code used by various IRQ handling routines:
+ *  asking for different IRQ's should be done through these routines
+ *  instead of just grabbing them. Thus setups with different IRQ numbers
+ *  shouldn't result in any weird surprises, and installing new handlers
+ *  should be easier.
+ *
+ *  IRQ's are in fact implemented a bit like signal handlers for the kernel.
+ *  Naturally it's not a 1:1 relation, but there are similarities.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/ptrace.h>
+#include <linux/kernel_stat.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/seq_file.h>
+#include <linux/errno.h>
+
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/irqchip.h>
+
+//FIXME - this ought to be in a header IMO
+void __init arc_init_irq(void);
+
+/*
+ * Maximum IRQ count.  Currently, this is arbitary.  However, it should
+ * not be set too low to prevent false triggering.  Conversely, if it
+ * is set too high, then you could miss a stuck IRQ.
+ *
+ * FIXME Maybe we ought to set a timer and re-enable the IRQ at a later time?
+ */
+#define MAX_IRQ_CNT	100000
+
+static volatile unsigned long irq_err_count;
+static DEFINE_SPINLOCK(irq_controller_lock);
+
+struct irqdesc irq_desc[NR_IRQS];
+
+/*
+ * Dummy mask/unmask handler
+ */
+void dummy_mask_unmask_irq(unsigned int irq)
+{
+}
+
+void do_bad_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
+{
+	irq_err_count += 1;
+	printk(KERN_ERR "IRQ: spurious interrupt %d\n", irq);
+}
+
+static struct irqchip bad_chip = {
+	.ack	= dummy_mask_unmask_irq,
+	.mask	= dummy_mask_unmask_irq,
+	.unmask = dummy_mask_unmask_irq,
+};
+
+static struct irqdesc bad_irq_desc = {
+	.chip	= &bad_chip,
+	.handle = do_bad_IRQ,
+	.depth	= 1,
+};
+
+/**
+ *	disable_irq - disable an irq and wait for completion
+ *	@irq: Interrupt to disable
+ *
+ *	Disable the selected interrupt line.  We do this lazily.
+ *
+ *	This function may be called from IRQ context.
+ */
+void disable_irq(unsigned int irq)
+{
+	struct irqdesc *desc = irq_desc + irq;
+	unsigned long flags;
+	spin_lock_irqsave(&irq_controller_lock, flags);
+	if (!desc->depth++)
+		desc->enabled = 0;
+	spin_unlock_irqrestore(&irq_controller_lock, flags);
+}
+
+/**
+ *	enable_irq - enable interrupt handling on an irq
+ *	@irq: Interrupt to enable
+ *
+ *	Re-enables the processing of interrupts on this IRQ line.
+ *	Note that this may call the interrupt handler, so you may
+ *	get unexpected results if you hold IRQs disabled.
+ *
+ *	This function may be called from IRQ context.
+ */
+void enable_irq(unsigned int irq)
+{
+	struct irqdesc *desc = irq_desc + irq;
+	unsigned long flags;
+	int pending = 0;
+
+	spin_lock_irqsave(&irq_controller_lock, flags);
+	if (unlikely(!desc->depth)) {
+		printk("enable_irq(%u) unbalanced from %p\n", irq,
+			__builtin_return_address(0)); //FIXME bum addresses reported - why?
+	} else if (!--desc->depth) {
+		desc->probing = 0;
+		desc->enabled = 1;
+		desc->chip->unmask(irq);
+		pending = desc->pending;
+		desc->pending = 0;
+		/*
+		 * If the interrupt was waiting to be processed,
+		 * retrigger it.
+		 */
+		if (pending)
+			desc->chip->rerun(irq);
+	}
+	spin_unlock_irqrestore(&irq_controller_lock, flags);
+}
+
+int show_interrupts(struct seq_file *p, void *v)
+{
+	int i = *(loff_t *) v;
+	struct irqaction * action;
+
+	if (i < NR_IRQS) {
+	    	action = irq_desc[i].action;
+		if (!action)
+			continue;
+		seq_printf(p, "%3d: %10u ", i, kstat_irqs(i));
+		seq_printf(p, "  %s", action->name);
+		for (action = action->next; action; action = action->next) {
+			seq_printf(p, ", %s", action->name);
+		}
+		seq_putc(p, '\n');
+	} else if (i == NR_IRQS) {
+		show_fiq_list(p, v);
+		seq_printf(p, "Err: %10lu\n", irq_err_count);
+	}
+	return 0;
+}
+
+/*
+ * IRQ lock detection.
+ *
+ * Hopefully, this should get us out of a few locked situations.
+ * However, it may take a while for this to happen, since we need
+ * a large number if IRQs to appear in the same jiffie with the
+ * same instruction pointer (or within 2 instructions).
+ */
+static int check_irq_lock(struct irqdesc *desc, int irq, struct pt_regs *regs)
+{
+	unsigned long instr_ptr = instruction_pointer(regs);
+
+	if (desc->lck_jif == jiffies &&
+	    desc->lck_pc >= instr_ptr && desc->lck_pc < instr_ptr + 8) {
+		desc->lck_cnt += 1;
+
+		if (desc->lck_cnt > MAX_IRQ_CNT) {
+			printk(KERN_ERR "IRQ LOCK: IRQ%d is locking the system, disabled\n", irq);
+			return 1;
+		}
+	} else {
+		desc->lck_cnt = 0;
+		desc->lck_pc  = instruction_pointer(regs);
+		desc->lck_jif = jiffies;
+	}
+	return 0;
+}
+
+static void
+__do_irq(unsigned int irq, struct irqaction *action, struct pt_regs *regs)
+{
+	unsigned int status;
+	int ret;
+
+	spin_unlock(&irq_controller_lock);
+	if (!(action->flags & SA_INTERRUPT))
+		local_irq_enable();
+
+	status = 0;
+	do {
+		ret = action->handler(irq, action->dev_id, regs);
+		if (ret == IRQ_HANDLED)
+			status |= action->flags;
+		action = action->next;
+	} while (action);
+
+	if (status & SA_SAMPLE_RANDOM)
+		add_interrupt_randomness(irq);
+
+	spin_lock_irq(&irq_controller_lock);
+}
+
+/*
+ * This is for software-decoded IRQs.  The caller is expected to
+ * handle the ack, clear, mask and unmask issues.
+ */
+void
+do_simple_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
+{
+	struct irqaction *action;
+	const int cpu = smp_processor_id();
+
+	desc->triggered = 1;
+
+	kstat_cpu(cpu).irqs[irq]++;
+
+	action = desc->action;
+	if (action)
+		__do_irq(irq, desc->action, regs);
+}
+
+/*
+ * Most edge-triggered IRQ implementations seem to take a broken
+ * approach to this.  Hence the complexity.
+ */
+void
+do_edge_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
+{
+	const int cpu = smp_processor_id();
+
+	desc->triggered = 1;
+
+	/*
+	 * If we're currently running this IRQ, or its disabled,
+	 * we shouldn't process the IRQ.  Instead, turn on the
+	 * hardware masks.
+	 */
+	if (unlikely(desc->running || !desc->enabled))
+		goto running;
+
+	/*
+	 * Acknowledge and clear the IRQ, but don't mask it.
+	 */
+	desc->chip->ack(irq);
+
+	/*
+	 * Mark the IRQ currently in progress.
+	 */
+	desc->running = 1;
+
+	kstat_cpu(cpu).irqs[irq]++;
+
+	do {
+		struct irqaction *action;
+
+		action = desc->action;
+		if (!action)
+			break;
+
+		if (desc->pending && desc->enabled) {
+			desc->pending = 0;
+			desc->chip->unmask(irq);
+		}
+
+		__do_irq(irq, action, regs);
+	} while (desc->pending);
+
+	desc->running = 0;
+
+	/*
+	 * If we were disabled or freed, shut down the handler.
+	 */
+	if (likely(desc->action && !check_irq_lock(desc, irq, regs)))
+		return;
+
+ running:
+	/*
+	 * We got another IRQ while this one was masked or
+	 * currently running.  Delay it.
+	 */
+	desc->pending = 1;
+	desc->chip->mask(irq);
+	desc->chip->ack(irq);
+}
+
+/*
+ * Level-based IRQ handler.  Nice and simple.
+ */
+void
+do_level_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
+{
+	struct irqaction *action;
+	const int cpu = smp_processor_id();
+
+	desc->triggered = 1;
+
+	/*
+	 * Acknowledge, clear _AND_ disable the interrupt.
+	 */
+	desc->chip->ack(irq);
+
+	if (likely(desc->enabled)) {
+		kstat_cpu(cpu).irqs[irq]++;
+
+		/*
+		 * Return with this interrupt masked if no action
+		 */
+		action = desc->action;
+		if (action) {
+			__do_irq(irq, desc->action, regs);
+
+			if (likely(desc->enabled &&
+				   !check_irq_lock(desc, irq, regs)))
+				desc->chip->unmask(irq);
+		}
+	}
+}
+
+/*
+ * do_IRQ handles all hardware IRQ's.  Decoded IRQs should not
+ * come via this function.  Instead, they should provide their
+ * own 'handler'
+ */
+asmlinkage void asm_do_IRQ(int irq, struct pt_regs *regs)
+{
+	struct irqdesc *desc = irq_desc + irq;
+
+	/*
+	 * Some hardware gives randomly wrong interrupts.  Rather
+	 * than crashing, do something sensible.
+	 */
+	if (irq >= NR_IRQS)
+		desc = &bad_irq_desc;
+
+	irq_enter();
+	spin_lock(&irq_controller_lock);
+	desc->handle(irq, desc, regs);
+	spin_unlock(&irq_controller_lock);
+	irq_exit();
+}
+
+void __set_irq_handler(unsigned int irq, irq_handler_t handle, int is_chained)
+{
+	struct irqdesc *desc;
+	unsigned long flags;
+
+	if (irq >= NR_IRQS) {
+		printk(KERN_ERR "Trying to install handler for IRQ%d\n", irq);
+		return;
+	}
+
+	if (handle == NULL)
+		handle = do_bad_IRQ;
+
+	desc = irq_desc + irq;
+
+	if (is_chained && desc->chip == &bad_chip)
+		printk(KERN_WARNING "Trying to install chained handler for IRQ%d\n", irq);
+
+	spin_lock_irqsave(&irq_controller_lock, flags);
+	if (handle == do_bad_IRQ) {
+		desc->chip->mask(irq);
+		desc->chip->ack(irq);
+		desc->depth = 1;
+		desc->enabled = 0;
+	}
+	desc->handle = handle;
+	if (handle != do_bad_IRQ && is_chained) {
+		desc->valid = 0;
+		desc->probe_ok = 0;
+		desc->depth = 0;
+		desc->chip->unmask(irq);
+	}
+	spin_unlock_irqrestore(&irq_controller_lock, flags);
+}
+
+void set_irq_chip(unsigned int irq, struct irqchip *chip)
+{
+	struct irqdesc *desc;
+	unsigned long flags;
+
+	if (irq >= NR_IRQS) {
+		printk(KERN_ERR "Trying to install chip for IRQ%d\n", irq);
+		return;
+	}
+
+	if (chip == NULL)
+		chip = &bad_chip;
+
+	desc = irq_desc + irq;
+	spin_lock_irqsave(&irq_controller_lock, flags);
+	desc->chip = chip;
+	spin_unlock_irqrestore(&irq_controller_lock, flags);
+}
+
+int set_irq_type(unsigned int irq, unsigned int type)
+{
+	struct irqdesc *desc;
+	unsigned long flags;
+	int ret = -ENXIO;
+
+	if (irq >= NR_IRQS) {
+		printk(KERN_ERR "Trying to set irq type for IRQ%d\n", irq);
+		return -ENODEV;
+	}
+
+	desc = irq_desc + irq;
+	if (desc->chip->type) {
+		spin_lock_irqsave(&irq_controller_lock, flags);
+		ret = desc->chip->type(irq, type);
+		spin_unlock_irqrestore(&irq_controller_lock, flags);
+	}
+
+	return ret;
+}
+
+void set_irq_flags(unsigned int irq, unsigned int iflags)
+{
+	struct irqdesc *desc;
+	unsigned long flags;
+
+	if (irq >= NR_IRQS) {
+		printk(KERN_ERR "Trying to set irq flags for IRQ%d\n", irq);
+		return;
+	}
+
+	desc = irq_desc + irq;
+	spin_lock_irqsave(&irq_controller_lock, flags);
+	desc->valid = (iflags & IRQF_VALID) != 0;
+	desc->probe_ok = (iflags & IRQF_PROBE) != 0;
+	desc->noautoenable = (iflags & IRQF_NOAUTOEN) != 0;
+	spin_unlock_irqrestore(&irq_controller_lock, flags);
+}
+
+int setup_irq(unsigned int irq, struct irqaction *new)
+{
+	int shared = 0;
+	struct irqaction *old, **p;
+	unsigned long flags;
+	struct irqdesc *desc;
+
+	/*
+	 * Some drivers like serial.c use request_irq() heavily,
+	 * so we have to be careful not to interfere with a
+	 * running system.
+	 */
+	if (new->flags & SA_SAMPLE_RANDOM) {
+		/*
+		 * This function might sleep, we want to call it first,
+		 * outside of the atomic block.
+		 * Yes, this might clear the entropy pool if the wrong
+		 * driver is attempted to be loaded, without actually
+		 * installing a new handler, but is this really a problem,
+		 * only the sysadmin is able to do this.
+		 */
+	        rand_initialize_irq(irq);
+	}
+
+	/*
+	 * The following block of code has to be executed atomically
+	 */
+	desc = irq_desc + irq;
+	spin_lock_irqsave(&irq_controller_lock, flags);
+	p = &desc->action;
+	if ((old = *p) != NULL) {
+		/* Can't share interrupts unless both agree to */
+		if (!(old->flags & new->flags & SA_SHIRQ)) {
+			spin_unlock_irqrestore(&irq_controller_lock, flags);
+			return -EBUSY;
+		}
+
+		/* add new interrupt at end of irq queue */
+		do {
+			p = &old->next;
+			old = *p;
+		} while (old);
+		shared = 1;
+	}
+
+	*p = new;
+
+	if (!shared) {
+ 		desc->probing = 0;
+		desc->running = 0;
+		desc->pending = 0;
+		desc->depth = 1;
+		if (!desc->noautoenable) {
+			desc->depth = 0;
+			desc->enabled = 1;
+			desc->chip->unmask(irq);
+		}
+	}
+
+	spin_unlock_irqrestore(&irq_controller_lock, flags);
+	return 0;
+}
+
+/**
+ *	request_irq - allocate an interrupt line
+ *	@irq: Interrupt line to allocate
+ *	@handler: Function to be called when the IRQ occurs
+ *	@irqflags: Interrupt type flags
+ *	@devname: An ascii name for the claiming device
+ *	@dev_id: A cookie passed back to the handler function
+ *
+ *	This call allocates interrupt resources and enables the
+ *	interrupt line and IRQ handling. From the point this
+ *	call is made your handler function may be invoked. Since
+ *	your handler function must clear any interrupt the board
+ *	raises, you must take care both to initialise your hardware
+ *	and to set up the interrupt handler in the right order.
+ *
+ *	Dev_id must be globally unique. Normally the address of the
+ *	device data structure is used as the cookie. Since the handler
+ *	receives this value it makes sense to use it.
+ *
+ *	If your interrupt is shared you must pass a non NULL dev_id
+ *	as this is required when freeing the interrupt.
+ *
+ *	Flags:
+ *
+ *	SA_SHIRQ		Interrupt is shared
+ *
+ *	SA_INTERRUPT		Disable local interrupts while processing
+ *
+ *	SA_SAMPLE_RANDOM	The interrupt can be used for entropy
+ *
+ */
+
+//FIXME - handler used to return void - whats the significance of the change?
+int request_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_regs *),
+		 unsigned long irq_flags, const char * devname, void *dev_id)
+{
+	unsigned long retval;
+	struct irqaction *action;
+
+	if (irq >= NR_IRQS || !irq_desc[irq].valid || !handler ||
+	    (irq_flags & SA_SHIRQ && !dev_id))
+		return -EINVAL;
+
+	action = (struct irqaction *)kmalloc(sizeof(struct irqaction), GFP_KERNEL);
+	if (!action)
+		return -ENOMEM;
+
+	action->handler = handler;
+	action->flags = irq_flags;
+	cpus_clear(action->mask);
+	action->name = devname;
+	action->next = NULL;
+	action->dev_id = dev_id;
+
+	retval = setup_irq(irq, action);
+
+	if (retval)
+		kfree(action);
+	return retval;
+}
+
+EXPORT_SYMBOL(request_irq);
+
+/**
+ *	free_irq - free an interrupt
+ *	@irq: Interrupt line to free
+ *	@dev_id: Device identity to free
+ *
+ *	Remove an interrupt handler. The handler is removed and if the
+ *	interrupt line is no longer in use by any driver it is disabled.
+ *	On a shared IRQ the caller must ensure the interrupt is disabled
+ *	on the card it drives before calling this function.
+ *
+ *	This function may be called from interrupt context.
+ */
+void free_irq(unsigned int irq, void *dev_id)
+{
+	struct irqaction * action, **p;
+	unsigned long flags;
+
+	if (irq >= NR_IRQS || !irq_desc[irq].valid) {
+		printk(KERN_ERR "Trying to free IRQ%d\n",irq);
+#ifdef CONFIG_DEBUG_ERRORS
+		__backtrace();
+#endif
+		return;
+	}
+
+	spin_lock_irqsave(&irq_controller_lock, flags);
+	for (p = &irq_desc[irq].action; (action = *p) != NULL; p = &action->next) {
+		if (action->dev_id != dev_id)
+			continue;
+
+	    	/* Found it - now free it */
+		*p = action->next;
+		kfree(action);
+		goto out;
+	}
+	printk(KERN_ERR "Trying to free free IRQ%d\n",irq);
+#ifdef CONFIG_DEBUG_ERRORS
+	__backtrace();
+#endif
+out:
+	spin_unlock_irqrestore(&irq_controller_lock, flags);
+}
+
+EXPORT_SYMBOL(free_irq);
+
+/* Start the interrupt probing.  Unlike other architectures,
+ * we don't return a mask of interrupts from probe_irq_on,
+ * but return the number of interrupts enabled for the probe.
+ * The interrupts which have been enabled for probing is
+ * instead recorded in the irq_desc structure.
+ */
+unsigned long probe_irq_on(void)
+{
+	unsigned int i, irqs = 0;
+	unsigned long delay;
+
+	/*
+	 * first snaffle up any unassigned but
+	 * probe-able interrupts
+	 */
+	spin_lock_irq(&irq_controller_lock);
+	for (i = 0; i < NR_IRQS; i++) {
+		if (!irq_desc[i].probe_ok || irq_desc[i].action)
+			continue;
+
+		irq_desc[i].probing = 1;
+		irq_desc[i].triggered = 0;
+		if (irq_desc[i].chip->type)
+			irq_desc[i].chip->type(i, IRQT_PROBE);
+		irq_desc[i].chip->unmask(i);
+		irqs += 1;
+	}
+	spin_unlock_irq(&irq_controller_lock);
+
+	/*
+	 * wait for spurious interrupts to mask themselves out again
+	 */
+	for (delay = jiffies + HZ/10; time_before(jiffies, delay); )
+		/* min 100ms delay */;
+
+	/*
+	 * now filter out any obviously spurious interrupts
+	 */
+	spin_lock_irq(&irq_controller_lock);
+	for (i = 0; i < NR_IRQS; i++) {
+		if (irq_desc[i].probing && irq_desc[i].triggered) {
+			irq_desc[i].probing = 0;
+			irqs -= 1;
+		}
+	}
+	spin_unlock_irq(&irq_controller_lock);
+
+	return irqs;
+}
+
+EXPORT_SYMBOL(probe_irq_on);
+
+/*
+ * Possible return values:
+ *  >= 0 - interrupt number
+ *    -1 - no interrupt/many interrupts
+ */
+int probe_irq_off(unsigned long irqs)
+{
+	unsigned int i;
+	int irq_found = NO_IRQ;
+
+	/*
+	 * look at the interrupts, and find exactly one
+	 * that we were probing has been triggered
+	 */
+	spin_lock_irq(&irq_controller_lock);
+	for (i = 0; i < NR_IRQS; i++) {
+		if (irq_desc[i].probing &&
+		    irq_desc[i].triggered) {
+			if (irq_found != NO_IRQ) {
+				irq_found = NO_IRQ;
+				goto out;
+			}
+			irq_found = i;
+		}
+	}
+
+	if (irq_found == -1)
+		irq_found = NO_IRQ;
+out:
+	spin_unlock_irq(&irq_controller_lock);
+
+	return irq_found;
+}
+
+EXPORT_SYMBOL(probe_irq_off);
+
+void __init init_irq_proc(void)
+{
+}
+
+void __init init_IRQ(void)
+{
+	struct irqdesc *desc;
+	extern void init_dma(void);
+	int irq;
+
+	for (irq = 0, desc = irq_desc; irq < NR_IRQS; irq++, desc++)
+		*desc = bad_irq_desc;
+
+	arc_init_irq();
+	init_dma();
+}