arm64: dts: exynos: Add dtsi files for Samsung Exynos5433 64bit SoC

This patch adds new Exynos5433 dtsi to support 64-bit Exynos5433 SoC
based on Octa-core CPUs (quad Cortex-A57 and quad Cortex-A53).
Exynos5433 supports PSCI (Power State Coordination Interface) v0.1.

This patch includes following Device Tree nodes to support Exynos5433 SoC:
1. Octa cores for big.LITTLE architecture
- Cortex-A53 LITTLE Quad-core
- Cortex-A57 big Quad-core
- Supporting PSCI v0.1

2. Clock controller nodes
- CMU_TOP   : clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS
- CMU_CPIF  : clocks for LLI (Low Latency Interface)
- CMU_MIF   : clocks for DRAM Memory Controller
- CMU_PERIC : clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS
- CMU_PERIS : clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC
- CMU_FSYS  : clocks for USB/UFS/SDMMC/TSI/PDMA
- CMU_G2D   : clocks for G2D/MDMA
- CMU_DISP  : clocks for DECON/HDMI/DSIM/MIXER
- CMU_AUD   : clocks for Cortex-A5/BUS/AUDIO
- CMU_BUS{0|1|2} : clocks for global data buses and global peripheral buses
- CMU_G3D   : clocks for 3D Graphics Engine
- CMU_GSCL  : clocks for GSCALER
- CMU_APOLLO: clocks for Cortex-A53 Quad-core processor.
- CMU_ATLAS : clocks for Cortex-A57 Quad-core processor,
              CoreSight and L2 cache controller.
- CMU_MSCL  : clocks for M2M (Memory to Memory) scaler and JPEG IPs.
- CMU_MFC   : clocks for MFC (Multi-Format Codec) IP.
- CMU_HEVC  : clocks for HEVC(High Efficiency Video Codec) decoder IP.
- CMU_ISP   : clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs.
- CMU_CAM0  : clocks for MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} IPs.
- CMU_CAM1  : clocks for COrtex-A5/MIPI_CSIS2/FIMC_LITE_C/FIMC-FD IPs.

3. Pinctrl nodes for GPIO
- alive/aud/cpif/ese/finger/fsys/imem/nfc/peric/touch pad

4. Timers
- ARM architecture timer (armv8-timer)
- MCT (Multi Core Timer) timer

5. Interrupt controller (GIC-400)

6. BUS devices
- HS-I2C (High-Speed I2C) device
- SPI (Serial Peripheral Interface) device

7. Sound devices
- I2S bus
- LPASS (Low Power Audio Subsystem)

8. Power management devices
- CPUFREQ for for Cortex-A53/A57
- TMU (Thermal Management Unit) for Cortex-A53/A57, G3D, ISP

9. Display controller devices
- DECON (Display and enhancement controller) for panel output
- DSI (Display Serial Interface)
- MIC (Mobile Image Compressor)

10. USB
- USB 3.0 DRD (Dual Role Device) controller
- USB 3.0 Host controller

11. Storage devices
- MSHC (Mobile Storage Host Controller)

12. Misc devices
- UART devices
- ADC (Analog Digital Converter)
- PWM (Pulse Width Modulation)
- ADMA (Advanced DMA) and PDMA (Peripheral DMA)

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Inha Song <ideal.song@samsung.com>
Signed-off-by: Ingi kim <ingi2.kim@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

1 files changed, 296 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
new file mode 100644
index 000000000000..ceaa05145b8a
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
@@ -0,0 +1,296 @@
+/*
+ * Device tree sources for Exynos5433 thermal zone
+ *
+ * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+thermal-zones {
+	atlas0_thermal: atlas0-thermal {
+		thermal-sensors = <&tmu_atlas0>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			atlas0_alert_0: atlas0-alert-0 {
+				temperature = <65000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_1: atlas0-alert-1 {
+				temperature = <70000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_2: atlas0-alert-2 {
+				temperature = <75000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_3: atlas0-alert-3 {
+				temperature = <80000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_4: atlas0-alert-4 {
+				temperature = <85000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_5: atlas0-alert-5 {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas0_alert_6: atlas0-alert-6 {
+				temperature = <95000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				/* Set maximum frequency as 1800MHz  */
+				trip = <&atlas0_alert_0>;
+				cooling-device = <&cpu4 1 2>;
+			};
+			map1 {
+				/* Set maximum frequency as 1700MHz  */
+				trip = <&atlas0_alert_1>;
+				cooling-device = <&cpu4 2 3>;
+			};
+			map2 {
+				/* Set maximum frequency as 1600MHz  */
+				trip = <&atlas0_alert_2>;
+				cooling-device = <&cpu4 3 4>;
+			};
+			map3 {
+				/* Set maximum frequency as 1500MHz  */
+				trip = <&atlas0_alert_3>;
+				cooling-device = <&cpu4 4 5>;
+			};
+			map4 {
+				/* Set maximum frequency as 1400MHz  */
+				trip = <&atlas0_alert_4>;
+				cooling-device = <&cpu4 5 7>;
+			};
+			map5 {
+				/* Set maximum frequencyas 1200MHz  */
+				trip = <&atlas0_alert_5>;
+				cooling-device = <&cpu4 7 9>;
+			};
+			map6 {
+				/* Set maximum frequency as 1000MHz  */
+				trip = <&atlas0_alert_6>;
+				cooling-device = <&cpu4 9 14>;
+			};
+		};
+	};
+
+	atlas1_thermal: atlas1-thermal {
+		thermal-sensors = <&tmu_atlas1>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			atlas1_alert_0: atlas1-alert-0 {
+				temperature = <65000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_1: atlas1-alert-1 {
+				temperature = <70000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_2: atlas1-alert-2 {
+				temperature = <75000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_3: atlas1-alert-3 {
+				temperature = <80000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_4: atlas1-alert-4 {
+				temperature = <85000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_5: atlas1-alert-5 {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			atlas1_alert_6: atlas1-alert-6 {
+				temperature = <95000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+		};
+	};
+
+	g3d_thermal: g3d-thermal {
+		thermal-sensors = <&tmu_g3d>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			g3d_alert_0: g3d-alert-0 {
+				temperature = <70000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_1: g3d-alert-1 {
+				temperature = <75000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_2: g3d-alert-2 {
+				temperature = <80000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_3: g3d-alert-3 {
+				temperature = <85000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_4: g3d-alert-4 {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_5: g3d-alert-5 {
+				temperature = <95000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			g3d_alert_6: g3d-alert-6 {
+				temperature = <100000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+		};
+	};
+
+	apollo_thermal: apollo-thermal {
+		thermal-sensors = <&tmu_apollo>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			apollo_alert_0: apollo-alert-0 {
+				temperature = <65000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_1: apollo-alert-1 {
+				temperature = <70000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_2: apollo-alert-2 {
+				temperature = <75000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_3: apollo-alert-3 {
+				temperature = <80000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_4: apollo-alert-4 {
+				temperature = <85000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_5: apollo-alert-5 {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			apollo_alert_6: apollo-alert-6 {
+				temperature = <95000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+		};
+
+		cooling-maps {
+			map0 {
+				/* Set maximum frequency as 1200MHz  */
+				trip = <&apollo_alert_2>;
+				cooling-device = <&cpu0 1 2>;
+			};
+			map1 {
+				/* Set maximum frequency as 1100MHz  */
+				trip = <&apollo_alert_3>;
+				cooling-device = <&cpu0 2 3>;
+			};
+			map2 {
+				/* Set maximum frequency as 1000MHz  */
+				trip = <&apollo_alert_4>;
+				cooling-device = <&cpu0 3 4>;
+			};
+			map3 {
+				/* Set maximum frequency as 900MHz  */
+				trip = <&apollo_alert_5>;
+				cooling-device = <&cpu0 4 5>;
+			};
+			map4 {
+				/* Set maximum frequency as 800MHz  */
+				trip = <&apollo_alert_6>;
+				cooling-device = <&cpu0 5 9>;
+			};
+		};
+	};
+
+	isp_thermal: isp-thermal {
+		thermal-sensors = <&tmu_isp>;
+		polling-delay-passive = <0>;
+		polling-delay = <0>;
+		trips {
+			isp_alert_0: isp-alert-0 {
+				temperature = <80000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_1: isp-alert-1 {
+				temperature = <85000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_2: isp-alert-2 {
+				temperature = <90000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_3: isp-alert-3 {
+				temperature = <95000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_4: isp-alert-4 {
+				temperature = <100000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_5: isp-alert-5 {
+				temperature = <105000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+			isp_alert_6: isp-alert-6 {
+				temperature = <110000>;	/* millicelsius */
+				hysteresis = <1000>;	/* millicelsius */
+				type = "active";
+			};
+		};
+	};
+};
+};