Merge tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM/arm64 Devicetree updates from Olof Johansson:
 "As usual, device tree updates is the bulk of our material in this
  merge window. This time around, 559 patches affecting both 32- and
  64-bit platforms.

  Changes are too many to list individually, but some of the larger
  ones:

  New platform/SoC support:

   - Automotive:
     + Renesas R-Car D3 (R8A77995)
     + TI DT76x
     + MediaTek mt2712e
   - Communication-oriented:
     + Qualcomm IPQ8074
     + Broadcom Stingray
     + Marvell Armada 8080
   - Set top box:
     + Uniphier PXs3

  Besides some vendor reference boards for the SoC above, there are also
  several new boards/machines:

   - TI AM335x Moxa UC-8100-ME-T open platform
   - TI AM57xx Beaglebone X15 Rev C
   - Microchip/Atmel sama5d27 SoM1 EK
   - Broadcom Raspberry Pi Zero W
   - Gemini-based D-Link DIR-685 router
   - Freescale i.MX6:
     + Toradex Apalis module + Apalis and Ixora carrier boards
     + Engicam GEAM6UL Starter Kit
   - Freescale i.MX53-based Beckhoff CX9020 Embedded PC
   - Mediatek mt7623-based BananaPi R2
   - Several Allwinner-based single-board computers:
  + Cubietruck plus
  + Bananapi M3, M2M and M64
  + NanoPi A64
  + A64-OLinuXino
  + Pine64
   - Rockchip RK3328 Pine64/Rock64 board support
   - Rockchip RK3399 boards:
  + RK3399 Sapphire module on Excavator carrier (RK3399 reference design)
  + Theobroma Systems RK3399-Q7 SoM
   - ZTE ZX296718 PCBOX Board"

* tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (559 commits)
  ARM: dts: at91: at91sam9g45: add AC97
  arm64: dts: marvell: mcbin: enable more networking ports
  arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node
  arm64: dts: marvell: add TX interrupts for PPv2.2
  arm64: dts: uniphier: add PXs3 SoC support
  ARM: dts: uniphier: add pinctrl groups of ethernet phy mode
  ARM: dts: uniphier: fix size of sdctrl nodes
  ARM: dts: uniphier: add AIDET nodes
  arm64: dts: uniphier: fix size of sdctrl node
  arm64: dts: uniphier: add AIDET nodes
  Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2"
  arm64: dts: uniphier: add reset controller node of analog amplifier
  arm64: dts: marvell: add Device Tree files for Armada-8KP
  arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM
  arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM
  dt-bindings: add rk3399-q7 SoM
  ARM: dts: rockchip: enable usb for rv1108-evb
  ARM: dts: rockchip: add usb nodes for rv1108 SoCs
  dt-bindings: update grf-binding for rv1108 SoCs
  ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers
  ...

3 files changed, 4 insertions, 21 deletions

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 105b2938082f..297597442c44 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -307,20 +307,6 @@
 	samsung,pll-clock-frequency = <24000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&te_irq>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@1 {
-			reg = <1>;
-
-			dsi_out: endpoint {
-				samsung,burst-clock-frequency = <512000000>;
-				samsung,esc-clock-frequency = <16000000>;
-			};
-		};
-	};
 };
 
 &hdmi {
@@ -843,7 +829,6 @@
 
 &mshc_0 {
 	status = "okay";
-	num-slots = <1>;
 	mmc-hs200-1_8v;
 	mmc-hs400-1_8v;
 	cap-mmc-highspeed;
@@ -865,7 +850,6 @@
 
 &mshc_2 {
 	status = "okay";
-	num-slots = <1>;
 	cap-sd-highspeed;
 	disable-wp;
 	cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
@@ -1210,8 +1194,9 @@
 	status = "okay";
 };
 
-&usbdrd_dwc3_0 {
+&usbdrd_dwc3 {
 	dr_mode = "otg";
+	extcon = <&muic>;
 };
 
 &usbdrd30_phy {
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 727f36abf3d4..7fe994b750da 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -1367,7 +1367,7 @@
 			ranges;
 			status = "disabled";
 
-			dwc3@15400000 {
+			usbdrd_dwc3: dwc3@15400000 {
 				compatible = "snps,dwc3";
 				reg = <0x15400000 0x10000>;
 				interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
@@ -1414,7 +1414,7 @@
 			ranges;
 			status = "disabled";
 
-			usbdrd_dwc3_0: dwc3@15a00000 {
+			usbhost_dwc3: dwc3@15a00000 {
 				compatible = "snps,dwc3";
 				reg = <0x15a00000 0x10000>;
 				interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index e5892bb0ae6e..4a8b1fb51243 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -359,7 +359,6 @@
 
 &mmc_0 {
 	status = "okay";
-	num-slots = <1>;
 	cap-mmc-highspeed;
 	mmc-hs200-1_8v;
 	non-removable;
@@ -375,7 +374,6 @@
 
 &mmc_2 {
 	status = "okay";
-	num-slots = <1>;
 	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	clock-frequency = <400000000>;