Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM device-tree updates from Arnd Bergmann:
 "We add device tree files for a couple of additional SoCs in various
  areas:

  Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for
  networking, Amlogic A113D for audio, and Renesas R-Car V3M for
  automotive.

  As usual, lots of new boards get added based on those and other SoCs:

   - Actions S500 based CubieBoard6 single-board computer

   - Amlogic Meson-AXG A113D based development board
   - Amlogic S912 based Khadas VIM2 single-board computer
   - Amlogic S912 based Tronsmart Vega S96 set-top-box

   - Allwinner H5 based NanoPi NEO Plus2 single-board computer
   - Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers
   - Allwinner A83T based TBS A711 Tablet

   - Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8
   - Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500
     wireless access points and routers

   - NXP i.MX51 based Zodiac Inflight Innovations RDU1 board
   - NXP i.MX53 based GE Healthcare PPD biometric monitor
   - NXP i.MX6 based Pistachio single-board computer
   - NXP i.MX6 based Vining-2000 automotive diagnostic interface
   - NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants

   - Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone
   - Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet

   - Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA

   - Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board
   - Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards
   - Renasas r8a7745 based iWave G22D-SODIMM SoM

   - Rockchip rk3288 based Amarula Vyasa single-board computer

   - Samsung Exynos5800 based Odroid HC1 single-board computer

  For existing SoC support, there was a lot of ongoing work, as usual
  most of that concentrated on the Renesas, Rockchip, OMAP, i.MX,
  Amlogic and Allwinner platforms, but others were also active.

  Rob Herring and many others worked on reducing the number of issues
  that the latest version of 'dtc' now warns about. Unfortunately there
  is still a lot left to do.

  A rework of the ARM foundation model introduced several new files for
  common variations of the model"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (599 commits)
  arm64: dts: uniphier: route on-board device IRQ to GPIO controller for PXs3
  dt-bindings: bus: Add documentation for the Technologic Systems NBUS
  arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock
  ARM: dts: owl-s500: Add CubieBoard6
  dt-bindings: arm: actions: Add CubieBoard6
  ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock
  ARM: dts: owl-s500: Set power domains for CPU2 and CPU3
  arm: dts: mt7623: remove unused compatible string for pio node
  arm: dts: mt7623: update usb related nodes
  arm: dts: mt7623: update crypto node
  ARM: dts: sun8i: a711: Enable USB OTG
  ARM: dts: sun8i: a711: Add regulator support
  ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1
  ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1
  ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file
  ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes
  ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes
  ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes
  ARM: dts: sunxi: Add dtsi for AXP81x PMIC
  arm64: dts: allwinner: H5: Restore EMAC changes
  ...

7 files changed, 721 insertions, 12 deletions

diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index e9f87cb61ade..97d768730952 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -197,6 +197,325 @@
 	};
 };
 
+/*
+ * Legend: proper name = the GPIO line is used as GPIO
+ *         NC = not connected (pin out but not routed from the chip to
+ *              anything the board)
+ *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ *         "" = no idea, schematic doesn't say, could be
+ *              unrouted (not connected to any external pin)
+ *         LSEC = Low Speed External Connector
+ *         HSEC = High Speed External Connector
+ *
+ * Line names are taken from "HiKey 960 Board ver A" schematics
+ * from Huawei. The 40 pin low speed expansion connector is named
+ * J2002 63453-140LF.
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART3. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+&gpio0 {
+	/* GPIO_000-GPIO_007 */
+	gpio-line-names =
+		"",
+		"TP901", /* TEST_MODE connected to TP901 */
+		"[PMU0_SSI]",
+		"[PMU1_SSI]",
+		"[PMU2_SSI]",
+		"[PMU0_CLKOUT]",
+		"[JTAG_TCK]",
+		"[JTAG_TMS]";
+};
+
+&gpio1 {
+	/* GPIO_008-GPIO_015 */
+	gpio-line-names =
+		"[JTAG_TRST_N]",
+		"[JTAG_TDI]",
+		"[JTAG_TDO]",
+		"NC", "NC",
+		"[I2C3_SCL]",
+		"[I2C3_SDA]",
+		"NC";
+};
+
+&gpio2 {
+	/* GPIO_016-GPIO_023 */
+	gpio-line-names =
+		"NC", "NC", "NC",
+		"GPIO-J", /* LSEC pin 32: GPIO_019 */
+		"GPIO_020_HDMI_SEL",
+		"GPIO-L", /* LSEC pin 34: GPIO_021 */
+		"GPIO_022_UFSBUCK_INT_N",
+		"GPIO-G"; /* LSEC pin 29: LCD_TE0 */
+};
+
+&gpio3 {
+	/* GPIO_024-GPIO_031 */
+	/* The rail from pin BK36 is named LCD_TE0, we assume to be muxed as GPIO for GPIO-G */
+	gpio-line-names =
+		"[CSI0_MCLK]", /* HSEC pin 15: ISP_CCLK0_MCAM */
+		"[CSI1_MCLK]", /* HSEC pin 17: ISP_CCLK1_SCAM */
+		"NC",
+		"[I2C2_SCL]", /* HSEC pin 32: ISP_SCL0 */
+		"[I2C2_SDA]", /* HSEC pin 34: ISP_SDA0 */
+		"[I2C3_SCL]", /* HSEC pin 36: ISP_SCL1 */
+		"[I2C3_SDA]", /* HSEC pin 38: ISP_SDA1 */
+		"NC";
+};
+
+&gpio4 {
+	/* GPIO_032-GPIO_039 */
+	gpio-line-names =
+		"NC", "NC",
+		"PWR_BTN_N", /* LSEC pin 4: GPIO_034_PWRON_DET */
+		"GPIO_035_PMU2_EN",
+		"GPIO_036_USB_HUB_RESET",
+		"NC", "NC", "NC";
+};
+
+&gpio5 {
+	/* GPIO_040-GPIO_047 */
+	gpio-line-names =
+		"GPIO-H", /* LSEC pin 30: GPIO_040_LCD_RST_N */
+		"GPIO_041_HDMI_PD",
+		"TP904", /* Test point */
+		"TP905", /* Test point */
+		"NC", "NC",
+		"GPIO_046_HUB_VDD33_EN",
+		"GPIO_047_PMU1_EN";
+};
+
+&gpio6 {
+	/* GPIO_048-GPIO_055 */
+	gpio-line-names =
+		"NC", "NC", "NC",
+		"GPIO_051_WIFI_EN",
+		"GPIO-I", /* LSEC pin 31: GPIO_052_CAM0_RST_N */
+		/*
+		 * These two pins should be used for SD(IO) data according to the
+		 * 96boards specification but seems to be repurposed for a IRDA UART.
+		 * They are however named according to the spec.
+		 */
+		"[SD_DAT1]", /* HSEC pin 3: UART0_IRDA_RXD */
+		"[SD_DAT2]", /* HSEC pin 5: UART0_IRDA_TXD */
+		"[UART1_RXD]"; /* LSEC pin 13: DEBUG_UART6_RXD */
+};
+
+&gpio7 {
+	/* GPIO_056-GPIO_063 */
+	gpio-line-names =
+		"[UART1_TXD]", /* LSEC pin 11: DEBUG_UART6_TXD */
+		"[UART0_CTS]", /* LSEC pin 3: UART3_CTS_N */
+		"[UART0_RTS]", /* LSEC pin 9: UART3_RTS_N */
+		"[UART0_RXD]", /* LSEC pin 7: UART3_RXD */
+		"[UART0_TXD]", /* LSEC pin 5: UART3_TXD */
+		"[SOC_BT_UART4_CTS_N]",
+		"[SOC_BT_UART4_RTS_N]",
+		"[SOC_BT_UART4_RXD]";
+};
+
+&gpio8 {
+	/* GPIO_064-GPIO_071 */
+	gpio-line-names =
+		"[SOC_BT_UART4_TXD]",
+		"NC",
+		"[PMU_HKADC_SSI]",
+		"NC",
+		"GPIO_068_SEL",
+		"NC", "NC", "NC";
+
+};
+
+&gpio9 {
+	/* GPIO_072-GPIO_079 */
+	gpio-line-names =
+		"NC", "NC", "NC",
+		"GPIO-K", /* LSEC pin 33: GPIO_075_CAM1_RST_N */
+		"NC", "NC", "NC", "NC";
+};
+
+&gpio10 {
+	/* GPIO_080-GPIO_087 */
+	gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio11 {
+	/* GPIO_088-GPIO_095 */
+	gpio-line-names =
+		"NC",
+		"[PCIE_PERST_N]",
+		"NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio12 {
+	/* GPIO_096-GPIO_103 */
+	gpio-line-names = "NC", "NC", "NC", "", "", "", "", "NC";
+};
+
+&gpio13 {
+	/* GPIO_104-GPIO_111 */
+	gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio14 {
+	/* GPIO_112-GPIO_119 */
+	gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
+};
+
+&gpio15 {
+	/* GPIO_120-GPIO_127 */
+	gpio-line-names =
+		"NC", "NC", "NC", "NC", "NC", "NC",
+		"GPIO_126_BT_EN",
+		"TP902"; /* GPIO_127_JTAG_SEL0 */
+};
+
+&gpio16 {
+	/* GPIO_128-GPIO_135 */
+	gpio-line-names = "", "", "", "", "", "", "", "";
+};
+
+&gpio17 {
+	/* GPIO_136-GPIO_143 */
+	gpio-line-names = "", "", "", "", "", "", "", "";
+};
+
+&gpio18 {
+	/* GPIO_144-GPIO_151 */
+	gpio-line-names =
+		"[UFS_REF_CLK]",
+		"[UFS_RST_N]",
+		"[SPI1_SCLK]", /* HSEC pin 9: GPIO_146_SPI3_CLK */
+		"[SPI1_DIN]", /* HSEC pin 11: GPIO_147_SPI3_DI */
+		"[SPI1_DOUT]", /* HSEC pin 1: GPIO_148_SPI3_DO */
+		"[SPI1_CS]", /* HSEC pin 7: GPIO_149_SPI3_CS0_N */
+		"GPIO_150_USER_LED1",
+		"GPIO_151_USER_LED2";
+};
+
+&gpio19 {
+	/* GPIO_152-GPIO_159 */
+	gpio-line-names = "NC", "NC", "NC", "NC", "", "", "", "";
+};
+
+&gpio20 {
+	/* GPIO_160-GPIO_167 */
+	gpio-line-names =
+		"[SD_CLK]",
+		"[SD_CMD]",
+		"[SD_DATA0]",
+		"[SD_DATA1]",
+		"[SD_DATA2]",
+		"[SD_DATA3]",
+		"", "";
+};
+
+&gpio21 {
+	/* GPIO_168-GPIO_175 */
+	gpio-line-names =
+		"[WL_SDIO_CLK]",
+		"[WL_SDIO_CMD]",
+		"[WL_SDIO_DATA0]",
+		"[WL_SDIO_DATA1]",
+		"[WL_SDIO_DATA2]",
+		"[WL_SDIO_DATA3]",
+		"", "";
+};
+
+&gpio22 {
+	/* GPIO_176-GPIO_183 */
+	gpio-line-names =
+		"[GPIO_176_PMU_PWR_HOLD]",
+		"NA",
+		"[SYSCLK_EN]",
+		"GPIO_179_WL_WAKEUP_AP",
+		"GPIO_180_HDMI_INT",
+		"NA",
+		"GPIO-F", /* LSEC pin 28: LCD_BL_PWM */
+		"[I2C0_SCL]"; /* LSEC pin 15 */
+};
+
+&gpio23 {
+	/* GPIO_184-GPIO_191 */
+	gpio-line-names =
+		"[I2C0_SDA]", /* LSEC pin 17 */
+		"[I2C1_SCL]", /* Actual SoC I2C1 */
+		"[I2C1_SDA]", /* Actual SoC I2C1 */
+		"[I2C1_SCL]", /* LSEC pin 19: I2C7_SCL */
+		"[I2C1_SDA]", /* LSEC pin 21: I2C7_SDA */
+		"GPIO_189_USER_LED3",
+		"GPIO_190_USER_LED4",
+		"";
+};
+
+&gpio24 {
+	/* GPIO_192-GPIO_199 */
+	gpio-line-names =
+		"[PCM_DI]", /* LSEC pin 22: GPIO_192_I2S0_DI */
+		"[PCM_DO]", /* LSEC pin 20: GPIO_193_I2S0_DO */
+		"[PCM_CLK]", /* LSEC pin 18: GPIO_194_I2S0_XCLK */
+		"[PCM_FS]", /* LSEC pin 16: GPIO_195_I2S0_XFS */
+		"[GPIO_196_I2S2_DI]",
+		"[GPIO_197_I2S2_DO]",
+		"[GPIO_198_I2S2_XCLK]",
+		"[GPIO_199_I2S2_XFS]";
+};
+
+&gpio25 {
+	/* GPIO_200-GPIO_207 */
+	gpio-line-names =
+		"NC",
+		"NC",
+		"GPIO_202_VBUS_TYPEC",
+		"GPIO_203_SD_DET",
+		"GPIO_204_PMU12_IRQ_N",
+		"GPIO_205_WIFI_ACTIVE",
+		"GPIO_206_USBSW_SEL",
+		"GPIO_207_BT_ACTIVE";
+};
+
+&gpio26 {
+	/* GPIO_208-GPIO_215 */
+	gpio-line-names =
+		"GPIO-A", /* LSEC pin 23: GPIO_208 */
+		"GPIO-B", /* LSEC pin 24: GPIO_209 */
+		"GPIO-C", /* LSEC pin 25: GPIO_210 */
+		"GPIO-D", /* LSEC pin 26: GPIO_211 */
+		"GPIO-E", /* LSEC pin 27: GPIO_212 */
+		"[PCIE_CLKREQ_N]",
+		"[PCIE_WAKE_N]",
+		"[SPI0_CLK]"; /* LSEC pin 8: SPI2_CLK */
+};
+
+&gpio27 {
+	/* GPIO_216-GPIO_223 */
+	gpio-line-names =
+		"[SPI0_DIN]", /* LSEC pin 10: SPI2_DI */
+		"[SPI0_DOUT]", /* LSEC pin 14: SPI2_DO */
+		"[SPI0_CS]", /* LSEC pin 12: SPI2_CS0_N */
+		"GPIO_219_CC_INT",
+		"NC",
+		"NC",
+		"[PMU_INT]",
+		"";
+};
+
+&gpio28 {
+	/* GPIO_224-GPIO_231 */
+	gpio-line-names =
+		"", "", "", "", "", "", "", "";
+};
+
 &i2c0 {
 	/* On Low speed expansion */
 	label = "LS-I2C0";
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 13ae69f5a327..ab0b95ba5ae5 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -979,5 +979,12 @@
 			clocks = <&crg_ctrl HI3660_OSC32K>;
 			clock-names = "apb_pclk";
 		};
+
+		tsensor: tsensor@fff30000 {
+			compatible = "hisilicon,hi3660-tsensor";
+			reg = <0x0 0xfff30000 0x0 0x1000>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			#thermal-sensor-cells = <1>;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
index b9142871d6fe..a6fd13389f8d 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
@@ -78,17 +78,17 @@
 
 &gpio1 {
 	status = "okay";
-	gpio-line-names = "LS-GPIO-E",	"",
+	gpio-line-names = "GPIO-E",	"",
 			  "",		"",
-			  "",		"LS-GPIO-F",
-			  "",		"LS-GPIO-J";
+			  "",		"GPIO-F",
+			  "",		"GPIO-J";
 };
 
 &gpio2 {
 	status = "okay";
-	gpio-line-names = "LS-GPIO-H",	"LS-GPIO-I",
-			  "LS-GPIO-L",	"LS-GPIO-G",
-			  "LS-GPIO-K",	"",
+	gpio-line-names = "GPIO-H",	"GPIO-I",
+			  "GPIO-L",	"GPIO-G",
+			  "GPIO-K",	"",
 			  "",		"";
 };
 
@@ -96,15 +96,15 @@
 	status = "okay";
 	gpio-line-names = "",		"",
 			  "",		"",
-			  "LS-GPIO-C",	"",
-			  "",		"LS-GPIO-B";
+			  "GPIO-C",	"",
+			  "",		"GPIO-B";
 };
 
 &gpio4 {
 	status = "okay";
 	gpio-line-names = "",		"",
 			  "",		"",
-			  "",		"LS-GPIO-D",
+			  "",		"GPIO-D",
 			  "",		"";
 };
 
@@ -112,7 +112,7 @@
 	status = "okay";
 	gpio-line-names = "",		"USER-LED-1",
 			  "USER-LED-2",	"",
-			  "",		"LS-GPIO-A",
+			  "",		"GPIO-A",
 			  "",		"";
 };
 
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
new file mode 100644
index 000000000000..7afee5d5087b
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
@@ -0,0 +1,381 @@
+/*
+ * dtsi file for Hisilicon Hi6220 coresight
+ *
+ * Copyright (C) 2017 Hisilicon Ltd.
+ *
+ * Author: Pengcheng Li <lipengcheng8@huawei.com>
+ *         Leo Yan <leo.yan@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ *
+ */
+
+/ {
+	soc {
+		funnel@f6401000 {
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0 0xf6401000 0 0x1000>;
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					soc_funnel_out: endpoint {
+						remote-endpoint =
+							<&etf_in>;
+					};
+				};
+
+				port@1 {
+					reg = <0>;
+					soc_funnel_in: endpoint {
+						slave-mode;
+						remote-endpoint =
+							<&acpu_funnel_out>;
+					};
+				};
+			};
+		};
+
+		etf@f6402000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0xf6402000 0 0x1000>;
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					etf_in: endpoint {
+						slave-mode;
+						remote-endpoint =
+							<&soc_funnel_out>;
+					};
+				};
+
+				port@1 {
+					reg = <0>;
+					etf_out: endpoint {
+						remote-endpoint =
+							<&replicator_in>;
+					};
+				};
+			};
+		};
+
+		replicator {
+			compatible = "arm,coresight-replicator";
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					replicator_in: endpoint {
+						slave-mode;
+						remote-endpoint =
+							<&etf_out>;
+					};
+				};
+
+				port@1 {
+					reg = <0>;
+					replicator_out0: endpoint {
+						remote-endpoint =
+							<&etr_in>;
+					};
+				};
+
+				port@2 {
+					reg = <1>;
+					replicator_out1: endpoint {
+						remote-endpoint =
+							<&tpiu_in>;
+					};
+				};
+			};
+		};
+
+		etr@f6404000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0 0xf6404000 0 0x1000>;
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					etr_in: endpoint {
+						slave-mode;
+						remote-endpoint =
+							<&replicator_out0>;
+					};
+				};
+			};
+		};
+
+		tpiu@f6405000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0 0xf6405000 0 0x1000>;
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					tpiu_in: endpoint {
+						slave-mode;
+						remote-endpoint =
+							<&replicator_out1>;
+					};
+				};
+			};
+		};
+
+		funnel@f6501000 {
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0 0xf6501000 0 0x1000>;
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					acpu_funnel_out: endpoint {
+						remote-endpoint =
+							<&soc_funnel_in>;
+					};
+				};
+
+				port@1 {
+					reg = <0>;
+					acpu_funnel_in0: endpoint {
+						slave-mode;
+						remote-endpoint =
+							<&etm0_out>;
+					};
+				};
+
+				port@2 {
+					reg = <1>;
+					acpu_funnel_in1: endpoint {
+						slave-mode;
+						remote-endpoint =
+							<&etm1_out>;
+					};
+				};
+
+				port@3 {
+					reg = <2>;
+					acpu_funnel_in2: endpoint {
+						slave-mode;
+						remote-endpoint =
+							<&etm2_out>;
+					};
+				};
+
+				port@4 {
+					reg = <3>;
+					acpu_funnel_in3: endpoint {
+						slave-mode;
+						remote-endpoint =
+							<&etm3_out>;
+					};
+				};
+
+				port@5 {
+					reg = <4>;
+					acpu_funnel_in4: endpoint {
+						slave-mode;
+						remote-endpoint =
+							<&etm4_out>;
+					};
+				};
+
+				port@6 {
+					reg = <5>;
+					acpu_funnel_in5: endpoint {
+						slave-mode;
+						remote-endpoint =
+							<&etm5_out>;
+					};
+				};
+
+				port@7 {
+					reg = <6>;
+					acpu_funnel_in6: endpoint {
+						slave-mode;
+						remote-endpoint =
+							<&etm6_out>;
+					};
+				};
+
+				port@8 {
+					reg = <7>;
+					acpu_funnel_in7: endpoint {
+						slave-mode;
+						remote-endpoint =
+							<&etm7_out>;
+					};
+				};
+			};
+		};
+
+		etm@f659c000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xf659c000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu0>;
+
+			port {
+				etm0_out: endpoint {
+					remote-endpoint =
+						<&acpu_funnel_in0>;
+				};
+			};
+		};
+
+		etm@f659d000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xf659d000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu1>;
+
+			port {
+				etm1_out: endpoint {
+					remote-endpoint =
+						<&acpu_funnel_in1>;
+				};
+			};
+		};
+
+		etm@f659e000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xf659e000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu2>;
+
+			port {
+				etm2_out: endpoint {
+					remote-endpoint =
+						<&acpu_funnel_in2>;
+				};
+			};
+		};
+
+		etm@f659f000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xf659f000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu3>;
+
+			port {
+				etm3_out: endpoint {
+					remote-endpoint =
+						<&acpu_funnel_in3>;
+				};
+			};
+		};
+
+		etm@f65dc000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xf65dc000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu4>;
+
+			port {
+				etm4_out: endpoint {
+					remote-endpoint =
+						<&acpu_funnel_in4>;
+				};
+			};
+		};
+
+		etm@f65dd000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xf65dd000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu5>;
+
+			port {
+				etm5_out: endpoint {
+					remote-endpoint =
+						<&acpu_funnel_in5>;
+				};
+			};
+		};
+
+		etm@f65de000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xf65de000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu6>;
+
+			port {
+				etm6_out: endpoint {
+					remote-endpoint =
+						<&acpu_funnel_in6>;
+				};
+			};
+		};
+
+		etm@f65df000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0 0xf65df000 0 0x1000>;
+
+			clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
+			clock-names = "apb_pclk";
+
+			cpu = <&cpu7>;
+
+			port {
+				etm7_out: endpoint {
+					remote-endpoint =
+						<&acpu_funnel_in7>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index ff1dc89f599e..6a180d1926e8 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -987,3 +987,5 @@
 		};
 	};
 };
+
+#include "hi6220-coresight.dtsi"
diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
index abba750b87f8..3bbd017f088f 100644
--- a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
+++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts
@@ -18,7 +18,7 @@
 	model = "Hisilicon Hip05 D02 Development Board";
 	compatible = "hisilicon,hip05-d02";
 
-	memory@00000000 {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x00000000 0x0 0x80000000>;
 	};
diff --git a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
index 7c4114a67753..9af633021a42 100644
--- a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
+++ b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
@@ -17,7 +17,7 @@
 	model = "Hisilicon Hip06 D03 Development Board";
 	compatible = "hisilicon,hip06-d03";
 
-	memory@00000000 {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x0 0x00000000 0x0 0x40000000>;
 	};