Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM Device-tree updates from Olof Johansson:
 "Besides new bindings and additional descriptions of hardware blocks
  for various SoCs and boards, the main new contents here is:

  SoCs:
   - Intel Agilex (SoCFPGA)
   - NXP i.MX8MM (Quad Cortex-A53 with media/graphics focus)

  New boards:
   - Allwinner:
      + RerVision H3-DVK (H3)
      + Oceanic 5205 5inMFD (H6)
      + Beelink GS2 (H6)
      + Orange Pi 3 (H6)
   - Rockchip:
      + Orange Pi RK3399
      + Nanopi NEO4
      + Veyron-Mighty Chromebook variant
   - Amlogic:
      + SEI Robotics SEI510
   - ST Micro:
      + stm32mp157a discovery1
      + stm32mp157c discovery2
   - NXP:
      + Eckelmann ci4x10 (i.MX6DL)
      + i.MX8MM EVK (i.MX8MM)
      + ZII i.MX7 RPU2 (i.MX7)
      + ZII SPB4 (VF610)
      + Zii Ultra (i.MX8M)
      + TQ TQMa7S (i.MX7Solo)
      + TQ TQMa7D (i.MX7Dual)
      + Kobo Aura (i.MX50)
      + Menlosystems M53 (i.MX53)j
   - Nvidia:
      + Jetson Nano (Tegra T210)"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (593 commits)
  arm64: dts: bitmain: Add UART pinctrl support for Sophon Edge
  arm64: dts: bitmain: Add pinctrl support for BM1880 SoC
  arm64: dts: bitmain: Add GPIO Line names for Sophon Edge board
  arm64: dts: bitmain: Add GPIO support for BM1880 SoC
  ARM: dts: gemini: Indent DIR-685 partition table
  dt-bindings: hwmon (pwm-fan) Remove dead "cooling-*-state" properties
  ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY
  arm64: dts: msm8998: thermal: Restrict thermal zone name length to under 20
  arm64: dts: msm8998: thermal: Fix number of supported sensors
  arm64: dts: msm8998-mtp: thermal: Remove skin and battery thermal zones
  arm64: dts: exynos: Move fixed-clocks out of soc
  arm64: dts: exynos: Move pmu and timer nodes out of soc
  ARM: dts: s5pv210: Fix camera clock provider on Goni board
  ARM: dts: exynos: Properly override node to use MDMA0 on Universal C210
  ARM: dts: exynos: Move fixed-clocks out of soc on Exynos3250
  ARM: dts: exynos: Remove unneeded address/size cells from fixed-clock on Exynos3250
  ARM: dts: exynos: Move pmu and timer nodes out of soc
  arm64: dts: rockchip: fix IO domain voltage setting of APIO5 on rockpro64
  arm64: dts: db820c: Add sound card support
  arm64: dts: apq8096-db820c: Add HDMI display support
  ...

1 files changed, 31 insertions, 4 deletions

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index c3c360161c5d..15f1842f6df3 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -178,12 +178,12 @@
 
 		cpu2: cpu@100 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a57";
+			compatible = "arm,cortex-a72";
 			reg = <0x100>;
 			enable-method = "psci";
 			cpu-idle-states = <&CPU_SLEEP_0>;
 			#cooling-cells = <2>;
-			clocks = <&infracfg CLK_INFRA_CA57SEL>,
+			clocks = <&infracfg CLK_INFRA_CA72SEL>,
 				 <&apmixedsys CLK_APMIXED_MAINPLL>;
 			clock-names = "cpu", "intermediate";
 			operating-points-v2 = <&cluster1_opp>;
@@ -191,12 +191,12 @@
 
 		cpu3: cpu@101 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a57";
+			compatible = "arm,cortex-a72";
 			reg = <0x101>;
 			enable-method = "psci";
 			cpu-idle-states = <&CPU_SLEEP_0>;
 			#cooling-cells = <2>;
-			clocks = <&infracfg CLK_INFRA_CA57SEL>,
+			clocks = <&infracfg CLK_INFRA_CA72SEL>,
 				 <&apmixedsys CLK_APMIXED_MAINPLL>;
 			clock-names = "cpu", "intermediate";
 			operating-points-v2 = <&cluster1_opp>;
@@ -216,6 +216,20 @@
 		};
 	};
 
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	pmu_a72 {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-affinity = <&cpu2>, <&cpu3>;
+	};
+
 	psci {
 		compatible = "arm,psci-1.0", "arm,psci-0.2", "arm,psci";
 		method = "smc";
@@ -1307,6 +1321,15 @@
 				      "vencpll",
 				      "venc_lt_sel",
 				      "vdec_bus_clk_src";
+			assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>,
+					  <&topckgen CLK_TOP_CCI400_SEL>,
+					  <&topckgen CLK_TOP_VDEC_SEL>,
+					  <&apmixedsys CLK_APMIXED_VCODECPLL>,
+					  <&apmixedsys CLK_APMIXED_VENCPLL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>,
+						 <&topckgen CLK_TOP_UNIVPLL_D2>,
+						 <&topckgen CLK_TOP_VCODECPLL>;
+			assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>;
 		};
 
 		larb1: larb@16010000 {
@@ -1372,6 +1395,10 @@
 				      "venc_sel",
 				      "venc_lt_sel_src",
 				      "venc_lt_sel";
+			assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>,
+					  <&topckgen CLK_TOP_VENC_LT_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_VENCPLL_D2>,
+						 <&topckgen CLK_TOP_UNIVPLL1_D2>;
 		};
 
 		vencltsys: clock-controller@19000000 {