diff options
| author | Stephan Gerhold <stephan@gerhold.net> | 2020-09-15 09:12:09 +0200 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2020-10-29 09:57:59 +0100 |
| commit | 975dafc038f08a51132bf6ce828361cc0fcd78a8 (patch) | |
| tree | 6560dd991564d218a04debe52183e2bbf3fceeba /arch/arm64/boot/dts/qcom | |
| parent | 08ece4ba2a6e32bc91a609369ec12f41804ba0d8 (diff) | |
arm64: dts: qcom: msm8916: Remove one more thermal trip point unit name
[ Upstream commit e6859ae8603c5946b8f3ecbd9b4f02b72955b9d0 ]
Commit fe2aff0c574d2 ("arm64: dts: qcom: msm8916: remove unit name for thermal trip points")
removed the unit names for most of the thermal trip points defined
in msm8916.dtsi, but missed to update the one for cpu0_1-thermal.
So why wasn't this spotted by "make dtbs_check"? Apparently, the name
of the thermal zone is already invalid: thermal-zones.yaml specifies
a regex of ^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$, so it is not allowed
to contain underscores. Therefore the thermal zone was never verified
using the DTB schema.
After replacing the underscore in the thermal zone name, the warning
shows up:
apq8016-sbc.dt.yaml: thermal-zones: cpu0-1-thermal:trips: 'trip-point@0'
does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
Fix up the thermal zone names and remove the unit name for the trip point.
Cc: Amit Kucheria <amit.kucheria@linaro.org>
Fixes: fe2aff0c574d2 ("arm64: dts: qcom: msm8916: remove unit name for thermal trip points")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200915071221.72895-3-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Diffstat (limited to 'arch/arm64/boot/dts/qcom')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8916.dtsi | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 340da154d4e3..ade2eb1781e3 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -175,14 +175,14 @@ }; thermal-zones { - cpu0_1-thermal { + cpu0-1-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsens 4>; trips { - cpu0_1_alert0: trip-point@0 { + cpu0_1_alert0: trip-point0 { temperature = <75000>; hysteresis = <2000>; type = "passive"; @@ -205,7 +205,7 @@ }; }; - cpu2_3-thermal { + cpu2-3-thermal { polling-delay-passive = <250>; polling-delay = <1000>; |