MLK-23303-1 dts: arm64: add the pcie support on imx8mp

Add the PCIe support on iMX8MP.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Fugang Duan <Fugang.duan@nxp.com>

2 files changed, 82 insertions, 1 deletions

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 291b6050c30a..507d1dfec88d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -543,6 +543,28 @@
 	status = "okay";
 };
 
+&pcie{
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	disable-gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
+	reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	ext_osc = <0>;
+	clocks = <&clk IMX8MP_CLK_HSIO_AXI_DIV>,
+		 <&clk IMX8MP_CLK_PCIE_AUX>,
+		 <&clk IMX8MP_CLK_PCIE_PHY>,
+		 <&clk IMX8MP_CLK_PCIE_ROOT>;
+	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+	assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI_SRC>,
+			  <&clk IMX8MP_CLK_PCIE_AUX>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>,
+				 <&clk IMX8MP_SYS_PLL2_50M>;
+	status = "okay";
+};
+
+&pcie_phy{
+	status = "okay";
+};
+
 &sai3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai3>;
@@ -805,6 +827,14 @@
 		>;
 	};
 
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__HSIOMIX_PCIE_CLKREQ_B	0x61 /* open drain, pull up */
+			MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06		0x41
+			MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07		0x41
+		>;
+	};
+
 	pinctrl_pmic: pmicirq {
 		fsl,pins = <
 			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x41
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 02ff6e456451..907376d6479b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/clock/imx8mp-clock.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -579,7 +580,8 @@
 			};
 
 			gpr: iomuxc-gpr@30340000 {
-				compatible = "fsl,imx8mp-iomuxc-gpr", "fsl,imx7d-iomuxc-gpr", "syscon";
+				compatible = "fsl,imx8mp-iomuxc-gpr", "fsl,imx7d-iomuxc-gpr",
+					     "fsl,imx6q-iomuxc-gpr", "syscon";
 				reg = <0x30340000 0x10000>;
 			};
 
@@ -1670,6 +1672,22 @@
 		};
 	};
 
+	pcie_phy: pcie-phy@32f00000 {
+		compatible = "fsl,imx8mp-pcie-phy";
+		reg = <0x0 0x32f00000 0x0 0x10000>;
+		clocks = <&clk IMX8MP_CLK_PCIE_PHY>;
+		clock-names = "phy";
+		assigned-clocks = <&clk IMX8MP_CLK_PCIE_PHY>;
+		assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+
+	hsio_mix: hsio-mix@32f10000 {
+		  compatible = "fsl,imx8mp-hsio-mix";
+		  reg = <0x0 0x32f10000 0x0 0x8>;
+	};
+
 	dma_apbh: dma-apbh@33000000 {
 		compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
 		reg = <0 0x33000000 0 0x2000>;
@@ -1699,6 +1717,39 @@
 		status = "disabled";
 	};
 
+	pcie: pcie@33800000 {
+		compatible = "fsl,imx8mp-pcie", "snps,dw-pcie";
+		reg = <0x0 0x33800000 0x0 0x400000>,
+			<0x0 0x1ff00000 0x0 0x80000>;
+		reg-names = "dbi", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges =  <0x81000000 0 0x00000000 0x0 0x1ff80000 0 0x00010000 /* downstream I/O 64KB */
+			   0x82000000 0 0x18000000 0x0 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
+		num-lanes = <1>;
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* eDMA */
+		interrupt-names = "msi";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		interrupt-map = <0 0 0 1 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,max-link-speed = <3>;
+		resets = <&src IMX8MQ_RESET_PCIEPHY>,
+			 <&src IMX8MQ_RESET_PCIEPHY_PERST>,
+			 <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
+			 <&src IMX8MQ_RESET_PCIE_CTRL_APPS_CLK_REQ>,
+			 <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
+		reset-names = "pciephy", "pciephy_perst", "apps", "clkreq", "turnoff";
+		phys = <&pcie_phy>;
+		phy-names = "pcie-phy";
+		fsl,imx8mp-hsio-mix = <&hsio_mix>;
+		status = "disabled";
+	};
+
 	gpu_3d: gpu3d@38000000 {
 		compatible = "fsl,imx8-gpu";
 		reg = <0x0 0x38000000 0x0 0x8000>;