diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2018-06-11 17:57:38 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2018-06-11 17:57:38 -0700 |
| commit | 721afaa2aeb860067decdddadc84ed16f42f2048 (patch) | |
| tree | c529f0aaaa6653ff3cb6fd1bae90faeddbc1f715 /arch/arm64/boot | |
| parent | 7c00e8ae041b349992047769af741b67379ce19a (diff) | |
| parent | 87815dda55934180d8e6ec0a0a448b104d251c54 (diff) | |
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree updates from Olof Johansson:
"As always, a large number of DT updates. Too many to enumerate them
all, but at a glance:
New SoCs introduced in this release:
- Amlogic:
+ Meson 8M2 SoC, a.k.a. S812. A quad Cortex-A9 SoC used in some
set top boxes and other products.
- Mediatek:
+ MT7623A, which is a flavor of the MT7623 family with other
on-chip ethernet options.
- Qualcomm:
+ SDM845, a.k.a Snapdragon 845, an 4+4-core Kryo 385/845
(Cortex-A75/A55 derivative) SoC that's one of the current
high-end mobile SoCs.
It's great to see mainline support for it. So far, you can't do
much with it, since a lot of peripherals are not yet in the DTs
but driver support for USB, GPU and other pieces are starting to
trickle in. This might end up being a well-supported SoC
upstream if the momentum keeps up.
- Renesas:
+ R8A77990, a.k.a R-Car E3, a new automotive
entertainment-targeted SoC. Currently only one Cortex-A53 CPU is
enabled, we are eagerly awaiting more. So far, basic drivers
such as serial, gpios, PMU and ethernet are enabled.
+ R8A77470, a.k.a. RZ/G1C, a new dual Cortex-A7 SoC with PowerVR
GPU. Same here, basic set of drivers such as serial, gpios and
ethernet enabled, and SMP support is also forthcoming.
- STMicroelectronics:
+ STM32F469, very similar tih STM32F429 but with display support
Enhancements to SoCs/platforms (DTS contents, some driver portions
might not be in yet):
- Allwinner sun8i (h3/a33/a83t) SMP, DVFS tweaks, misc
- Amlogic Meson: I2C, UFS, TDM, GPIO external interrupts, MMC resets
- Hisilicon hi3660: Thermal cooling, CPU frequency scaling, mailbox interfaces
- Marvell Berlin2CD: SMP support, thermal sensors
- Mediatek MT7623: Highspeed DMA, audio support
- Qualcomm IPQ8074 PCIe support, MSM8996 UFS support
- Renesas: Watchdog and PMU support across many platforms
- Rockchip RK3399: USB3 OTG support
- Samsung Exynos: Audio-over-HDMI on Odroid X/X2/U3
- STMicro STM32: Lots of peripherals added to STM32MP175C
- Uniphier: Ethernet support
New boards:
- Allwinner A20: Olimex A20-SOM-EVB-eMMC variant
- Allwinner H2+: Libre Computer ALL-H3-CC (h2+ version)
- Allwinner A33: Nintendo NES/SuperNES Classic Edition
- Aspeed: S2600WF, Inventec Lanyang BMC, Portwell Neptune
- Berlin2CD: Valve Steam Link
- Broadcom BCM5301X: Luxul XAP-1610 and XWR-3150 V1
- Broadcom: Raspberry Pi 3 B+
- Mediatek MT7623N and MT7623A: reference boards
- Meson 8M2: Tronsmart MXIII Plus
- NXP i.MX: Engicam i.CoreM6, DHCOM iMX6 SOM, BTicino i.MX6DL Mamoj
- Qualcomm MSM8974: Sony Xperia Z1 Compact support
- Qualcomm SDM845: MTP development board
- Renesas: Ebisu R8A77990 board
- Renesas RZ/G1C: iwg23s: iWave G235-SDB
- TI am335x: Pocketbeagle support"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (448 commits)
ARM: dts: aspeed: Fix hwrng register address
arm64: dts: sprd: whale2: Add the rtc enable clock for watchdog
arm64: dts: sprd: Add GPIO and GPIO keys device nodes
arm64: dts: sprd: fix typo in 'remote-endpoint'
arm64: dts: apq8096-db820c: Removed bt-en-1-8v regulator
arm64: dts: fix regulator property name for wlan pcie endpoint
arm64: dts: qcom: msm8996: Use UFS_GDSC for UFS
ARM: dts: pxa3xx: fix MMC clocks
ARM: pxa: dts: add pin definitions for extended GPIOs
ARM: pxa: dts: add gpio-ranges to gpio controller
ARM: dts: ipq8074: Enable few peripherals for hk01 board
ARM: dts: ipq8074: Add pcie nodes
ARM: dts: ipq8074: Add peripheral nodes
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 board file
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file
ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data
ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 board file
ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file
ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi
ARM: dts: ipq4019: Change the max opp frequency
...
Diffstat (limited to 'arch/arm64/boot')
80 files changed, 4491 insertions, 598 deletions
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 4aa50b9b26bc..3543bc324553 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -22,5 +22,6 @@ subdir-y += renesas subdir-y += rockchip subdir-y += socionext subdir-y += sprd +subdir-y += synaptics subdir-y += xilinx subdir-y += zte diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 8bebe7da5ed9..c31f90a49481 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -6,10 +6,11 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb -dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb -dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi index ff8af52743ff..e5eae8bafc42 100644 --- a/arch/arm64/boot/dts/allwinner/axp803.dtsi +++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi @@ -146,5 +146,10 @@ regulator-max-microvolt = <3000000>; regulator-name = "rtc-ldo"; }; + + reg_drivevbus: drivevbus { + regulator-name = "drivevbus"; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index 2250dec9974c..0716b1441187 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -86,6 +86,10 @@ }; }; +&ehci0 { + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -155,6 +159,10 @@ status = "okay"; }; +&ohci0 { + status = "okay"; +}; + &ohci1 { status = "okay"; }; @@ -167,6 +175,7 @@ reg = <0x3a3>; interrupt-parent = <&r_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */ }; }; @@ -254,6 +263,11 @@ regulator-name = "vcc-wifi-io"; }; +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + ®_eldo1 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -294,6 +308,13 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + usb0_vbus-supply = <®_drivevbus>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts new file mode 100644 index 000000000000..95e113ce8699 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +/dts-v1/; +#include "sun50i-h5.dtsi" +#include <arm/sunxi-libretech-all-h3-cc.dtsi> + +/ { + model = "Libre Computer Board ALL-H3-CC H5"; + compatible = "libretech,all-h3-cc-h5", "allwinner,sun50i-h5"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi index e237c05cfdb4..62d646baac3c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -47,7 +47,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a53", "arm,armv8"; device_type = "cpu"; reg = <0>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts index d36de5eb81f3..b6f2d6b2ecae 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts @@ -22,6 +22,16 @@ }; }; +&r_i2c { + status = "okay"; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + #clock-cells = <0>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_ph_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 56563150d61a..c72da8cd9ef5 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -4,6 +4,8 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/sun50i-h6-ccu.h> +#include <dt-bindings/reset/sun50i-h6-ccu.h> / { interrupt-parent = <&gic>; @@ -115,7 +117,7 @@ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu 26>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_APB1>, <&osc24M>, <&osc32k>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; @@ -134,8 +136,8 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 70>; - resets = <&ccu 21>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; status = "disabled"; }; @@ -145,8 +147,8 @@ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 71>; - resets = <&ccu 22>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; status = "disabled"; }; @@ -156,8 +158,8 @@ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 72>; - resets = <&ccu 23>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; status = "disabled"; }; @@ -167,9 +169,59 @@ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 73>; - resets = <&ccu 24>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; status = "disabled"; }; + + r_ccu: clock@7010000 { + compatible = "allwinner,sun50i-h6-r-ccu"; + reg = <0x07010000 0x400>; + clocks = <&osc24M>, <&osc32k>, <&iosc>, + <&ccu CLK_PLL_PERIPH0>; + clock-names = "hosc", "losc", "iosc", "pll-periph"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + r_intc: interrupt-controller@7021000 { + compatible = "allwinner,sun50i-h6-r-intc", + "allwinner,sun6i-a31-r-intc"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x07021000 0x400>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + }; + + r_pio: pinctrl@7022000 { + compatible = "allwinner,sun50i-h6-r-pinctrl"; + reg = <0x07022000 0x400>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu 2>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + r_i2c_pins: r-i2c { + pins = "PL0", "PL1"; + function = "s_i2c"; + }; + }; + + r_i2c: i2c@7081400 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x07081400 0x400>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu 8>; + resets = <&r_ccu 4>; + pinctrl-names = "default"; + pinctrl-0 = <&r_i2c_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index 57eedced5a51..4b3331fbfe39 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -15,6 +15,53 @@ serial0 = &uart_AO; serial1 = &uart_A; }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ + }; }; ðmac { @@ -47,3 +94,62 @@ pinctrl-0 = <&i2c1_z_pins>; pinctrl-names = "default"; }; + +&i2c_AO { + status = "okay"; + pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>; + pinctrl-names = "default"; +}; + +&pwm_ab { + status = "okay"; + pinctrl-0 = <&pwm_a_x20_pins>; + pinctrl-names = "default"; +}; + +/* emmc storage */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <180000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* wifi module */ +&sd_emmc_b { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index b58808eb3cc8..fee87737a201 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -7,6 +7,9 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/axg-clkc.h> +#include <dt-bindings/clock/axg-aoclkc.h> +#include <dt-bindings/gpio/meson-axg-gpio.h> +#include <dt-bindings/reset/amlogic,meson-axg-reset.h> / { compatible = "amlogic,meson-axg"; @@ -107,12 +110,51 @@ #clock-cells = <0>; }; + ao_alt_xtal: ao_alt_xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <32000000>; + clock-output-names = "ao_alt_xtal"; + #clock-cells = <0>; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges; + apb: apb@ffe00000 { + compatible = "simple-bus"; + reg = <0x0 0xffe00000 0x0 0x200000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>; + + sd_emmc_b: sd@5000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0x5000 0x0 0x2000>; + interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_B>, + <&clkc CLKID_SD_EMMC_B_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_B>; + }; + + sd_emmc_c: mmc@7000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0x7000 0x0 0x2000>; + interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_C>, + <&clkc CLKID_SD_EMMC_C_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_C>; + }; + }; + cbus: bus@ffd00000 { compatible = "simple-bus"; reg = <0x0 0xffd00000 0x0 0x25000>; @@ -120,6 +162,15 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>; + gpio_intc: interrupt-controller@f080 { + compatible = "amlogic,meson-gpio-intc"; + reg = <0x0 0xf080 0x0 0x10>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; + status = "disabled"; + }; + pwm_ab: pwm@1b000 { compatible = "amlogic,meson-axg-ee-pwm"; reg = <0x0 0x1b000 0x0 0x20>; @@ -164,50 +215,42 @@ i2c0: i2c@1f000 { compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; reg = <0x0 0x1f000 0x0 0x20>; - interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - clock-names = "clk_i2c"; + status = "disabled"; }; i2c1: i2c@1e000 { compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x1e000 0x0 0x20>; + interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; #address-cells = <1>; #size-cells = <0>; - reg = <0x0 0x1e000 0x0 0x20>; status = "disabled"; - interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_I2C>; - clock-names = "clk_i2c"; }; i2c2: i2c@1d000 { compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; reg = <0x0 0x1d000 0x0 0x20>; - interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 49 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - clock-names = "clk_i2c"; + status = "disabled"; }; i2c3: i2c@1c000 { compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; reg = <0x0 0x1c000 0x0 0x20>; - interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - clock-names = "clk_i2c"; + status = "disabled"; }; uart_A: serial@24000 { @@ -262,10 +305,14 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>; - clkc: clock-controller@0 { - compatible = "amlogic,axg-clkc"; - #clock-cells = <1>; - reg = <0x0 0x0 0x0 0x320>; + sysctrl: system-controller@0 { + compatible = "amlogic,meson-axg-hhi-sysctrl", "syscon", "simple-mfd"; + reg = <0 0 0 0x400>; + + clkc: clock-controller { + compatible = "amlogic,axg-clkc"; + #clock-cells = <1>; + }; }; }; @@ -309,6 +356,57 @@ gpio-ranges = <&pinctrl_periphs 0 0 86>; }; + emmc_pins: emmc { + mux { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "emmc_clk", + "emmc_cmd", + "emmc_ds"; + function = "emmc"; + }; + }; + + emmc_clk_gate_pins: emmc_clk_gate { + mux { + groups = "BOOT_8"; + function = "gpio_periphs"; + }; + cfg-pull-down { + pins = "BOOT_8"; + bias-pull-down; + }; + }; + + sdio_pins: sdio { + mux { + groups = "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", + "sdio_cmd", + "sdio_clk"; + function = "sdio"; + }; + }; + + sdio_clk_gate_pins: sdio_clk_gate { + mux { + groups = "GPIOX_4"; + function = "gpio_periphs"; + }; + cfg-pull-down { + pins = "GPIOX_4"; + bias-pull-down; + }; + }; + eth_rmii_x_pins: eth-x-rmii { mux { groups = "eth_mdio_x", @@ -660,6 +758,251 @@ function = "uart_ao_b_z"; }; }; + + mclk_b_pins: mclk_b { + mux { + groups = "mclk_b"; + function = "mclk_b"; + }; + }; + + mclk_c_pins: mclk_c { + mux { + groups = "mclk_c"; + function = "mclk_c"; + }; + }; + + tdma_sclk_pins: tdma_sclk { + mux { + groups = "tdma_sclk"; + function = "tdma"; + }; + }; + + tdma_sclk_slv_pins: tdma_sclk_slv { + mux { + groups = "tdma_sclk_slv"; + function = "tdma"; + }; + }; + + tdma_fs_pins: tdma_fs { + mux { + groups = "tdma_fs"; + function = "tdma"; + }; + }; + + tdma_fs_slv_pins: tdma_fs_slv { + mux { + groups = "tdma_fs_slv"; + function = "tdma"; + }; + }; + + tdma_din0_pins: tdma_din0 { + mux { + groups = "tdma_din0"; + function = "tdma"; + }; + }; + + tdma_dout0_x14_pins: tdma_dout0_x14 { + mux { + groups = "tdma_dout0_x14"; + function = "tdma"; + }; + }; + + tdma_dout0_x15_pins: tdma_dout0_x15 { + mux { + groups = "tdma_dout0_x15"; + function = "tdma"; + }; + }; + + tdma_dout1_pins: tdma_dout1 { + mux { + groups = "tdma_dout1"; + function = "tdma"; + }; + }; + + tdma_din1_pins: tdma_din1 { + mux { + groups = "tdma_din1"; + function = "tdma"; + }; + }; + + tdmb_sclk_pins: tdmb_sclk { + mux { + groups = "tdmb_sclk"; + function = "tdmb"; + }; + }; + + tdmb_sclk_slv_pins: tdmb_sclk_slv { + mux { + groups = "tdmb_sclk_slv"; + function = "tdmb"; + }; + }; + + tdmb_fs_pins: tdmb_fs { + mux { + groups = "tdmb_fs"; + function = "tdmb"; + }; + }; + + tdmb_fs_slv_pins: tdmb_fs_slv { + mux { + groups = "tdmb_fs_slv"; + function = "tdmb"; + }; + }; + + tdmb_din0_pins: tdmb_din0 { + mux { + groups = "tdmb_din0"; + function = "tdmb"; + }; + }; + + tdmb_dout0_pins: tdmb_dout0 { + mux { + groups = "tdmb_dout0"; + function = "tdmb"; + }; + }; + + tdmb_din1_pins: tdmb_din1 { + mux { + groups = "tdmb_din1"; + function = "tdmb"; + }; + }; + + tdmb_dout1_pins: tdmb_dout1 { + mux { + groups = "tdmb_dout1"; + function = "tdmb"; + }; + }; + + tdmb_din2_pins: tdmb_din2 { + mux { + groups = "tdmb_din2"; + function = "tdmb"; + }; + }; + + tdmb_dout2_pins: tdmb_dout2 { + mux { + groups = "tdmb_dout2"; + function = "tdmb"; + }; + }; + + tdmb_din3_pins: tdmb_din3 { + mux { + groups = "tdmb_din3"; + function = "tdmb"; + }; + }; + + tdmb_dout3_pins: tdmb_dout3 { + mux { + groups = "tdmb_dout3"; + function = "tdmb"; + }; + }; + + tdmc_sclk_pins: tdmc_sclk { + mux { + groups = "tdmc_sclk"; + function = "tdmc"; + }; + }; + + tdmc_sclk_slv_pins: tdmc_sclk_slv { + mux { + groups = "tdmc_sclk_slv"; + function = "tdmc"; + }; + }; + + tdmc_fs_pins: tdmc_fs { + mux { + groups = "tdmc_fs"; + function = "tdmc"; + }; + }; + + tdmc_fs_slv_pins: tdmc_fs_slv { + mux { + groups = "tdmc_fs_slv"; + function = "tdmc"; + }; + }; + + tdmc_din0_pins: tdmc_din0 { + mux { + groups = "tdmc_din0"; + function = "tdmc"; + }; + }; + + tdmc_dout0_pins: tdmc_dout0 { + mux { + groups = "tdmc_dout0"; + function = "tdmc"; + }; + }; + + tdmc_din1_pins: tdmc_din1 { + mux { + groups = "tdmc_din1"; + function = "tdmc"; + }; + }; + + tdmc_dout1_pins: tdmc_dout1 { + mux { + groups = "tdmc_dout1"; + function = "tdmc"; + }; + }; + + tdmc_din2_pins: tdmc_din2 { + mux { + groups = "tdmc_din2"; + function = "tdmc"; + }; + }; + + tdmc_dout2_pins: tdmc_dout2 { + mux { + groups = "tdmc_dout2"; + function = "tdmc"; + }; + }; + + tdmc_din3_pins: tdmc_din3 { + mux { + groups = "tdmc_din3"; + function = "tdmc"; + }; + }; + + tdmc_dout3_pins: tdmc_dout3 { + mux { + groups = "tdmc_dout3"; + function = "tdmc"; + }; + }; }; }; @@ -688,6 +1031,17 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; + sysctrl_AO: sys-ctrl@0 { + compatible = "amlogic,meson-axg-ao-sysctrl", "syscon", "simple-mfd"; + reg = <0x0 0x0 0x0 0x100>; + + clkc_AO: clock-controller { + compatible = "amlogic,meson-axg-aoclkc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; + pinctrl_aobus: pinctrl@14 { compatible = "amlogic,meson-axg-aobus-pinctrl"; #address-cells = <2>; @@ -704,6 +1058,48 @@ gpio-ranges = <&pinctrl_aobus 0 0 15>; }; + i2c_ao_sck_4_pins: i2c_ao_sck_4 { + mux { + groups = "i2c_ao_sck_4"; + function = "i2c_ao"; + }; + }; + + i2c_ao_sck_8_pins: i2c_ao_sck_8 { + mux { + groups = "i2c_ao_sck_8"; + function = "i2c_ao"; + }; + }; + + i2c_ao_sck_10_pins: i2c_ao_sck_10 { + mux { + groups = "i2c_ao_sck_10"; + function = "i2c_ao"; + }; + }; + + i2c_ao_sda_5_pins: i2c_ao_sda_5 { + mux { + groups = "i2c_ao_sda_5"; + function = "i2c_ao"; + }; + }; + + i2c_ao_sda_9_pins: i2c_ao_sda_9 { + mux { + groups = "i2c_ao_sda_9"; + function = "i2c_ao"; + }; + }; + + i2c_ao_sda_11_pins: i2c_ao_sda_11 { + mux { + groups = "i2c_ao_sda_11"; + function = "i2c_ao"; + }; + }; + remote_input_ao_pins: remote_input_ao { mux { groups = "remote_input_ao"; @@ -766,20 +1162,19 @@ i2c_AO: i2c@5000 { compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; reg = <0x0 0x05000 0x0 0x20>; interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_AO_I2C>; #address-cells = <1>; #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - clock-names = "clk_i2c"; + status = "disabled"; }; uart_AO: serial@3000 { compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x3000 0x0 0x18>; interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>; clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; @@ -788,7 +1183,7 @@ compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x4000 0x0 0x18>; interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 562c26a0ba33..98cbba6809ca 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -307,11 +307,10 @@ clock-names = "isfr", "iahb", "venci"; }; -&hiubus { - clkc: clock-controller@0 { +&sysctrl { + clkc: clock-controller { compatible = "amlogic,gxbb-clkc"; #clock-cells = <1>; - reg = <0x0 0x0 0x0 0x3db>; }; }; @@ -716,6 +715,7 @@ <&clkc CLKID_SD_EMMC_A_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_A>; }; &sd_emmc_b { @@ -723,6 +723,7 @@ <&clkc CLKID_SD_EMMC_B_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_B>; }; &sd_emmc_c { @@ -730,6 +731,7 @@ <&clkc CLKID_SD_EMMC_C_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_C>; }; &spicc { @@ -749,12 +751,12 @@ }; &uart_AO { - clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>; clock-names = "xtal", "pclk", "baud"; }; &uart_AO_B { - clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; clock-names = "xtal", "pclk", "baud"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index dba365ed4bd5..27538eea547b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -267,11 +267,10 @@ clock-names = "isfr", "iahb", "venci"; }; -&hiubus { - clkc: clock-controller@0 { - compatible = "amlogic,gxl-clkc", "amlogic,gxbb-clkc"; +&sysctrl { + clkc: clock-controller { + compatible = "amlogic,gxl-clkc"; #clock-cells = <1>; - reg = <0x0 0x0 0x0 0x3db>; }; }; @@ -725,13 +724,15 @@ <&clkc CLKID_SD_EMMC_A_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_A>; }; &sd_emmc_b { clocks = <&clkc CLKID_SD_EMMC_B>, <&clkc CLKID_SD_EMMC_B_CLK0>, <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_B>; }; &sd_emmc_c { @@ -739,6 +740,7 @@ <&clkc CLKID_SD_EMMC_C_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_C>; }; &spicc { @@ -758,12 +760,12 @@ }; &uart_AO { - clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>; clock-names = "xtal", "pclk", "baud"; }; &uart_AO_B { - clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; clock-names = "xtal", "pclk", "baud"; }; diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index eb749c50a736..ce56a4acda4f 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include "juno-clocks.dtsi" +#include "juno-motherboard.dtsi" / { /* @@ -572,14 +573,14 @@ thermal-sensors = <&scpi_sensors0 3>; }; - big_cluster_thermal_zone: big_cluster { + big_cluster_thermal_zone: big-cluster { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 21>; status = "disabled"; }; - little_cluster_thermal_zone: little_cluster { + little_cluster_thermal_zone: little-cluster { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 22>; @@ -677,7 +678,7 @@ clock-names = "pxlclk"; port { - hdlcd1_output: hdlcd1-endpoint { + hdlcd1_output: endpoint { remote-endpoint = <&tda998x_1_input>; }; }; @@ -692,7 +693,7 @@ clock-names = "pxlclk"; port { - hdlcd0_output: hdlcd0-endpoint { + hdlcd0_output: endpoint { remote-endpoint = <&tda998x_0_input>; }; }; @@ -720,7 +721,7 @@ compatible = "nxp,tda998x"; reg = <0x70>; port { - tda998x_0_input: tda998x-0-endpoint { + tda998x_0_input: endpoint { remote-endpoint = <&hdlcd0_output>; }; }; @@ -730,7 +731,7 @@ compatible = "nxp,tda998x"; reg = <0x71>; port { - tda998x_1_input: tda998x-1-endpoint { + tda998x_1_input: endpoint { remote-endpoint = <&hdlcd1_output>; }; }; @@ -795,8 +796,6 @@ <0 0 10 &gic 0 0 0 167 IRQ_TYPE_LEVEL_HIGH>, <0 0 11 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>, <0 0 12 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>; - - /include/ "juno-motherboard.dtsi" }; site2: tlx@60000000 { diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi index 69804c5f1197..1792b074e9a3 100644 --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -7,6 +7,8 @@ * */ +/ { + smb@8000000 { mb_clk24mhz: clk24mhz { compatible = "fixed-clock"; #clock-cells = <0>; @@ -54,46 +56,46 @@ regulator-always-on; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; power-button { - debounce_interval = <50>; + debounce-interval = <50>; wakeup-source; linux,code = <116>; label = "POWER"; gpios = <&iofpga_gpio0 0 0x4>; }; home-button { - debounce_interval = <50>; + debounce-interval = <50>; wakeup-source; linux,code = <102>; label = "HOME"; gpios = <&iofpga_gpio0 1 0x4>; }; rlock-button { - debounce_interval = <50>; + debounce-interval = <50>; wakeup-source; linux,code = <152>; label = "RLOCK"; gpios = <&iofpga_gpio0 2 0x4>; }; vol-up-button { - debounce_interval = <50>; + debounce-interval = <50>; wakeup-source; linux,code = <115>; label = "VOL+"; gpios = <&iofpga_gpio0 3 0x4>; }; vol-down-button { - debounce_interval = <50>; + debounce-interval = <50>; wakeup-source; linux,code = <114>; label = "VOL-"; gpios = <&iofpga_gpio0 4 0x4>; }; nmi-button { - debounce_interval = <50>; + debounce-interval = <50>; wakeup-source; linux,code = <99>; label = "NMI"; @@ -287,3 +289,5 @@ }; }; }; + }; +}; diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts index aed6389468c4..2c5db03f226c 100644 --- a/arch/arm64/boot/dts/arm/juno-r1.dts +++ b/arch/arm64/boot/dts/arm/juno-r1.dts @@ -201,7 +201,7 @@ }; }; - pmu_a57 { + pmu-a57 { compatible = "arm,cortex-a57-pmu"; interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>; @@ -209,7 +209,7 @@ <&A57_1>; }; - pmu_a53 { + pmu-a53 { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, @@ -278,6 +278,10 @@ remote-endpoint = <&csys2_funnel_out_port>; }; +&csys1_funnel_in_port0 { + remote-endpoint = <&stm_out_port>; +}; + &stm_out_port { remote-endpoint = <&csys1_funnel_in_port0>; }; diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts index b39b6d6ec5aa..c51950f4a1b6 100644 --- a/arch/arm64/boot/dts/arm/juno-r2.dts +++ b/arch/arm64/boot/dts/arm/juno-r2.dts @@ -201,7 +201,7 @@ }; }; - pmu_a72 { + pmu-a72 { compatible = "arm,cortex-a72-pmu"; interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>; @@ -209,7 +209,7 @@ <&A72_1>; }; - pmu_a53 { + pmu-a53 { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, @@ -278,6 +278,10 @@ remote-endpoint = <&csys2_funnel_out_port>; }; +&csys1_funnel_in_port0 { + remote-endpoint = <&stm_out_port>; +}; + &stm_out_port { remote-endpoint = <&csys1_funnel_in_port0>; }; diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index c9236c4b967d..2b2bf39c30ef 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -200,7 +200,7 @@ }; }; - pmu_a57 { + pmu-a57 { compatible = "arm,cortex-a57-pmu"; interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>; @@ -208,7 +208,7 @@ <&A57_1>; }; - pmu_a53 { + pmu-a53 { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts index 06c8117e812a..602f63f72c37 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts +++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts @@ -12,6 +12,8 @@ /memreserve/ 0x80000000 0x00010000; +#include "rtsm_ve-motherboard.dtsi" + / { model = "RTSM_VE_AEMv8A"; compatible = "arm,rtsm_ve,aemv8a", "arm,vexpress"; @@ -162,7 +164,5 @@ <0 0 40 &gic 0 40 4>, <0 0 41 &gic 0 41 4>, <0 0 42 &gic 0 42 4>; - - /include/ "rtsm_ve-motherboard.dtsi" }; }; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi index 1134e5d8df18..d2dbc3f39263 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi @@ -7,270 +7,273 @@ * * VEMotherBoard.lisa */ - - motherboard { - arm,v2m-memory-map = "rs1"; - compatible = "arm,vexpress,v2m-p1", "simple-bus"; - #address-cells = <2>; /* SMB chipselect number and offset */ - #size-cells = <1>; - #interrupt-cells = <1>; - ranges; - - flash@0,00000000 { - compatible = "arm,vexpress-flash", "cfi-flash"; - reg = <0 0x00000000 0x04000000>, - <4 0x00000000 0x04000000>; - bank-width = <4>; - }; - - v2m_video_ram: vram@2,00000000 { - compatible = "arm,vexpress-vram"; - reg = <2 0x00000000 0x00800000>; - }; - - ethernet@2,02000000 { - compatible = "smsc,lan91c111"; - reg = <2 0x02000000 0x10000>; - interrupts = <15>; - }; - - v2m_clk24mhz: clk24mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - clock-output-names = "v2m:clk24mhz"; - }; - - v2m_refclk1mhz: refclk1mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000>; - clock-output-names = "v2m:refclk1mhz"; - }; - - v2m_refclk32khz: refclk32khz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "v2m:refclk32khz"; - }; - - iofpga@3,00000000 { - compatible = "simple-bus"; - #address-cells = <1>; +/ { + smb@8000000 { + motherboard { + arm,v2m-memory-map = "rs1"; + compatible = "arm,vexpress,v2m-p1", "simple-bus"; + #address-cells = <2>; /* SMB chipselect number and offset */ #size-cells = <1>; - ranges = <0 3 0 0x200000>; - - v2m_sysreg: sysreg@10000 { - compatible = "arm,vexpress-sysreg"; - reg = <0x010000 0x1000>; - gpio-controller; - #gpio-cells = <2>; + #interrupt-cells = <1>; + ranges; + + flash@0,00000000 { + compatible = "arm,vexpress-flash", "cfi-flash"; + reg = <0 0x00000000 0x04000000>, + <4 0x00000000 0x04000000>; + bank-width = <4>; }; - v2m_sysctl: sysctl@20000 { - compatible = "arm,sp810", "arm,primecell"; - reg = <0x020000 0x1000>; - clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>; - clock-names = "refclk", "timclk", "apb_pclk"; - #clock-cells = <1>; - clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; - assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>; - assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; + v2m_video_ram: vram@2,00000000 { + compatible = "arm,vexpress-vram"; + reg = <2 0x00000000 0x00800000>; }; - aaci@40000 { - compatible = "arm,pl041", "arm,primecell"; - reg = <0x040000 0x1000>; - interrupts = <11>; - clocks = <&v2m_clk24mhz>; - clock-names = "apb_pclk"; + ethernet@2,02000000 { + compatible = "smsc,lan91c111"; + reg = <2 0x02000000 0x10000>; + interrupts = <15>; }; - mmci@50000 { - compatible = "arm,pl180", "arm,primecell"; - reg = <0x050000 0x1000>; - interrupts = <9 10>; - cd-gpios = <&v2m_sysreg 0 0>; - wp-gpios = <&v2m_sysreg 1 0>; - max-frequency = <12000000>; - vmmc-supply = <&v2m_fixed_3v3>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "mclk", "apb_pclk"; + v2m_clk24mhz: clk24mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "v2m:clk24mhz"; }; - kmi@60000 { - compatible = "arm,pl050", "arm,primecell"; - reg = <0x060000 0x1000>; - interrupts = <12>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "KMIREFCLK", "apb_pclk"; + v2m_refclk1mhz: refclk1mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = "v2m:refclk1mhz"; }; - kmi@70000 { - compatible = "arm,pl050", "arm,primecell"; - reg = <0x070000 0x1000>; - interrupts = <13>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "KMIREFCLK", "apb_pclk"; + v2m_refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "v2m:refclk32khz"; }; - v2m_serial0: uart@90000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x090000 0x1000>; - interrupts = <5>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; + iofpga@3,00000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 3 0 0x200000>; + + v2m_sysreg: sysreg@10000 { + compatible = "arm,vexpress-sysreg"; + reg = <0x010000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + }; - v2m_serial1: uart@a0000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0a0000 0x1000>; - interrupts = <6>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; + v2m_sysctl: sysctl@20000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x020000 0x1000>; + clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; + assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>; + assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; + }; - v2m_serial2: uart@b0000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0b0000 0x1000>; - interrupts = <7>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; + aaci@40000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x040000 0x1000>; + interrupts = <11>; + clocks = <&v2m_clk24mhz>; + clock-names = "apb_pclk"; + }; - v2m_serial3: uart@c0000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0c0000 0x1000>; - interrupts = <8>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; + mmci@50000 { + compatible = "arm,pl180", "arm,primecell"; + reg = <0x050000 0x1000>; + interrupts = <9 10>; + cd-gpios = <&v2m_sysreg 0 0>; + wp-gpios = <&v2m_sysreg 1 0>; + max-frequency = <12000000>; + vmmc-supply = <&v2m_fixed_3v3>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "mclk", "apb_pclk"; + }; - wdt@f0000 { - compatible = "arm,sp805", "arm,primecell"; - reg = <0x0f0000 0x1000>; - interrupts = <0>; - clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>; - clock-names = "wdogclk", "apb_pclk"; - }; + kmi@60000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x060000 0x1000>; + interrupts = <12>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; - v2m_timer01: timer@110000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x110000 0x1000>; - interrupts = <2>; - clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>; - clock-names = "timclken1", "timclken2", "apb_pclk"; - }; + kmi@70000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x070000 0x1000>; + interrupts = <13>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; - v2m_timer23: timer@120000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x120000 0x1000>; - interrupts = <3>; - clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>; - clock-names = "timclken1", "timclken2", "apb_pclk"; - }; + v2m_serial0: uart@90000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x090000 0x1000>; + interrupts = <5>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; - rtc@170000 { - compatible = "arm,pl031", "arm,primecell"; - reg = <0x170000 0x1000>; - interrupts = <4>; - clocks = <&v2m_clk24mhz>; - clock-names = "apb_pclk"; - }; + v2m_serial1: uart@a0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0a0000 0x1000>; + interrupts = <6>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; - clcd@1f0000 { - compatible = "arm,pl111", "arm,primecell"; - reg = <0x1f0000 0x1000>; - interrupt-names = "combined"; - interrupts = <14>; - clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>; - clock-names = "clcdclk", "apb_pclk"; - arm,pl11x,framebuffer = <0x18000000 0x00180000>; - memory-region = <&v2m_video_ram>; - max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */ - - port { - v2m_clcd_pads: endpoint { - remote-endpoint = <&v2m_clcd_panel>; - arm,pl11x,tft-r0g0b0-pads = <0 8 16>; - }; + v2m_serial2: uart@b0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0b0000 0x1000>; + interrupts = <7>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; }; - panel { - compatible = "panel-dpi"; + v2m_serial3: uart@c0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0c0000 0x1000>; + interrupts = <8>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + wdt@f0000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0f0000 0x1000>; + interrupts = <0>; + clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>; + clock-names = "wdogclk", "apb_pclk"; + }; + + v2m_timer01: timer@110000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x110000 0x1000>; + interrupts = <2>; + clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>; + clock-names = "timclken1", "timclken2", "apb_pclk"; + }; + + v2m_timer23: timer@120000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x120000 0x1000>; + interrupts = <3>; + clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>; + clock-names = "timclken1", "timclken2", "apb_pclk"; + }; + + rtc@170000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x170000 0x1000>; + interrupts = <4>; + clocks = <&v2m_clk24mhz>; + clock-names = "apb_pclk"; + }; + + clcd@1f0000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x1f0000 0x1000>; + interrupt-names = "combined"; + interrupts = <14>; + clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>; + clock-names = "clcdclk", "apb_pclk"; + arm,pl11x,framebuffer = <0x18000000 0x00180000>; + memory-region = <&v2m_video_ram>; + max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */ port { - v2m_clcd_panel: endpoint { - remote-endpoint = <&v2m_clcd_pads>; + v2m_clcd_pads: endpoint { + remote-endpoint = <&v2m_clcd_panel>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; }; }; - panel-timing { - clock-frequency = <63500127>; - hactive = <1024>; - hback-porch = <152>; - hfront-porch = <48>; - hsync-len = <104>; - vactive = <768>; - vback-porch = <23>; - vfront-porch = <3>; - vsync-len = <4>; + panel { + compatible = "panel-dpi"; + + port { + v2m_clcd_panel: endpoint { + remote-endpoint = <&v2m_clcd_pads>; + }; + }; + + panel-timing { + clock-frequency = <63500127>; + hactive = <1024>; + hback-porch = <152>; + hfront-porch = <48>; + hsync-len = <104>; + vactive = <768>; + vback-porch = <23>; + vfront-porch = <3>; + vsync-len = <4>; + }; }; }; - }; - virtio-block@130000 { - compatible = "virtio,mmio"; - reg = <0x130000 0x200>; - interrupts = <42>; + virtio-block@130000 { + compatible = "virtio,mmio"; + reg = <0x130000 0x200>; + interrupts = <42>; + }; }; - }; - - v2m_fixed_3v3: v2m-3v3 { - compatible = "regulator-fixed"; - regulator-name = "3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - mcc { - compatible = "arm,vexpress,config-bus"; - arm,vexpress,config-bridge = <&v2m_sysreg>; - v2m_oscclk1: oscclk1 { - /* CLCD clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 1>; - freq-range = <23750000 63500000>; - #clock-cells = <0>; - clock-output-names = "v2m:oscclk1"; + v2m_fixed_3v3: v2m-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; }; - reset { - compatible = "arm,vexpress-reset"; - arm,vexpress-sysreg,func = <5 0>; - }; + mcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + v2m_oscclk1: oscclk1 { + /* CLCD clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <23750000 63500000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk1"; + }; - muxfpga { - compatible = "arm,vexpress-muxfpga"; - arm,vexpress-sysreg,func = <7 0>; - }; + reset { + compatible = "arm,vexpress-reset"; + arm,vexpress-sysreg,func = <5 0>; + }; - shutdown { - compatible = "arm,vexpress-shutdown"; - arm,vexpress-sysreg,func = <8 0>; - }; + muxfpga { + compatible = "arm,vexpress-muxfpga"; + arm,vexpress-sysreg,func = <7 0>; + }; - reboot { - compatible = "arm,vexpress-reboot"; - arm,vexpress-sysreg,func = <9 0>; - }; + shutdown { + compatible = "arm,vexpress-shutdown"; + arm,vexpress-sysreg,func = <8 0>; + }; + + reboot { + compatible = "arm,vexpress-reboot"; + arm,vexpress-sysreg,func = <9 0>; + }; - dvimode { - compatible = "arm,vexpress-dvimode"; - arm,vexpress-sysreg,func = <11 0>; + dvimode { + compatible = "arm,vexpress-dvimode"; + arm,vexpress-sysreg,func = <11 0>; + }; }; }; }; +}; diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts index 1c9eadc2d71e..38880380e0fa 100644 --- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts +++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts @@ -13,6 +13,7 @@ /dts-v1/; #include <dt-bindings/interrupt-controller/arm-gic.h> +#include "vexpress-v2m-rs1.dtsi" / { model = "V2F-1XV7 Cortex-A53x2 SMM"; @@ -129,7 +130,7 @@ }; }; - smb@8000000 { + smb: smb@8000000 { compatible = "simple-bus"; #address-cells = <2>; @@ -186,7 +187,5 @@ <0 0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, <0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; - - /include/ "vexpress-v2m-rs1.dtsi" }; }; diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index 2a2591ef1fee..1193a9e34bbb 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb +dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb \ + bcm2837-rpi-3-b-plus.dtb subdir-y += northstar2 subdir-y += stingray diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts new file mode 100644 index 000000000000..46ad2023cccf --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts @@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "arm/bcm2837-rpi-3-b-plus.dts" diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 1ad8677f6a0a..038c99792ccb 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -18,8 +18,8 @@ / { compatible = "samsung,exynos5433"; - #address-cells = <2>; - #size-cells = <2>; + #address-cells = <1>; + #size-cells = <1>; interrupt-parent = <&gic>; @@ -231,18 +231,11 @@ cpu_on = <0xC4000003>; }; - reboot: syscon-reboot { - compatible = "syscon-reboot"; - regmap = <&pmu_system_controller>; - offset = <0x400>; /* SWRESET */ - mask = <0x1>; - }; - soc: soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x0 0x0 0x0 0x18000000>; + ranges; arm_a53_pmu { compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3"; @@ -799,6 +792,13 @@ #clock-cells = <1>; clock-names = "clkout16"; clocks = <&xxti>; + + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&pmu_system_controller>; + offset = <0x400>; /* SWRESET */ + mask = <0x1>; + }; }; gic: interrupt-controller@11001000 { @@ -829,11 +829,16 @@ <&cmu_disp CLK_ACLK_SMMU_DECON0X>, <&cmu_disp CLK_ACLK_XIU_DECON0X>, <&cmu_disp CLK_PCLK_SMMU_DECON0X>, + <&cmu_disp CLK_ACLK_SMMU_DECON1X>, + <&cmu_disp CLK_ACLK_XIU_DECON1X>, + <&cmu_disp CLK_PCLK_SMMU_DECON1X>, <&cmu_disp CLK_SCLK_DECON_VCLK>, <&cmu_disp CLK_SCLK_DECON_ECLK>; clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x", "pclk_smmu_decon0x", - "sclk_decon_vclk", "sclk_decon_eclk"; + "aclk_smmu_decon1x", "aclk_xiu_decon1x", + "pclk_smmu_decon1x", "sclk_decon_vclk", + "sclk_decon_eclk"; power-domains = <&pd_disp>; interrupt-names = "fifo", "vsync", "lcd_sys"; interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, @@ -866,11 +871,16 @@ <&cmu_disp CLK_ACLK_SMMU_TV0X>, <&cmu_disp CLK_ACLK_XIU_TV0X>, <&cmu_disp CLK_PCLK_SMMU_TV0X>, + <&cmu_disp CLK_ACLK_SMMU_TV1X>, + <&cmu_disp CLK_ACLK_XIU_TV1X>, + <&cmu_disp CLK_PCLK_SMMU_TV1X>, <&cmu_disp CLK_SCLK_DECON_TV_VCLK>, <&cmu_disp CLK_SCLK_DECON_TV_ECLK>; clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x", "pclk_smmu_decon0x", - "sclk_decon_vclk", "sclk_decon_eclk"; + "aclk_smmu_decon1x", "aclk_xiu_decon1x", + "pclk_smmu_decon1x", "sclk_decon_vclk", + "sclk_decon_eclk"; samsung,disp-sysreg = <&syscon_disp>; power-domains = <&pd_disp>; interrupt-names = "fifo", "vsync", "lcd_sys"; @@ -1034,6 +1044,30 @@ power-domains = <&pd_gscl>; }; + scaler_0: scaler@15000000 { + compatible = "samsung,exynos5433-scaler"; + reg = <0x15000000 0x1294>; + interrupts = <0 402 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "pclk", "aclk", "aclk_xiu"; + clocks = <&cmu_mscl CLK_PCLK_M2MSCALER0>, + <&cmu_mscl CLK_ACLK_M2MSCALER0>, + <&cmu_mscl CLK_ACLK_XIU_MSCLX>; + iommus = <&sysmmu_scaler_0>; + power-domains = <&pd_mscl>; + }; + + scaler_1: scaler@15010000 { + compatible = "samsung,exynos5433-scaler"; + reg = <0x15010000 0x1294>; + interrupts = <0 403 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "pclk", "aclk", "aclk_xiu"; + clocks = <&cmu_mscl CLK_PCLK_M2MSCALER1>, + <&cmu_mscl CLK_ACLK_M2MSCALER1>, + <&cmu_mscl CLK_ACLK_XIU_MSCLX>; + iommus = <&sysmmu_scaler_1>; + power-domains = <&pd_mscl>; + }; + jpeg: codec@15020000 { compatible = "samsung,exynos5433-jpeg"; reg = <0x15020000 0x10000>; @@ -1137,6 +1171,28 @@ power-domains = <&pd_gscl>; }; + sysmmu_scaler_0: sysmmu@0x15040000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x15040000 0x1000>; + interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_mscl CLK_PCLK_SMMU_M2MSCALER0>, + <&cmu_mscl CLK_ACLK_SMMU_M2MSCALER0>; + #iommu-cells = <0>; + power-domains = <&pd_mscl>; + }; + + sysmmu_scaler_1: sysmmu@0x15050000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x15050000 0x1000>; + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_mscl CLK_PCLK_SMMU_M2MSCALER1>, + <&cmu_mscl CLK_ACLK_SMMU_M2MSCALER1>; + #iommu-cells = <0>; + power-domains = <&pd_mscl>; + }; + sysmmu_jpeg: sysmmu@15060000 { compatible = "samsung,exynos-sysmmu"; reg = <0x15060000 0x1000>; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index ad9dce6894ce..93a84338938a 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -12,8 +12,8 @@ / { compatible = "samsung,exynos7"; interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; + #address-cells = <1>; + #size-cells = <1>; aliases { pinctrl0 = &pinctrl_alive; @@ -70,7 +70,7 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0 0 0x18000000>; + ranges; chipid@10000000 { compatible = "samsung,exynos4210-chipid"; @@ -494,13 +494,13 @@ pmu_system_controller: system-controller@105c0000 { compatible = "samsung,exynos7-pmu", "syscon"; reg = <0x105c0000 0x5000>; - }; - reboot: syscon-reboot { - compatible = "syscon-reboot"; - regmap = <&pmu_system_controller>; - offset = <0x0400>; - mask = <0x1>; + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&pmu_system_controller>; + offset = <0x0400>; + mask = <0x1>; + }; }; rtc: rtc@10590000 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index bb788eddf9f4..205f0f4c5df0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -53,11 +53,11 @@ aliases { crypto = &crypto; - rtic_a = &rtic_a; - rtic_b = &rtic_b; - rtic_c = &rtic_c; - rtic_d = &rtic_d; - sec_mon = &sec_mon; + rtic-a = &rtic_a; + rtic-b = &rtic_b; + rtic-c = &rtic_c; + rtic-d = &rtic_d; + sec-mon = &sec_mon; }; cpus { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi index 5498c705ae6a..061647bd97b8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi @@ -134,7 +134,7 @@ &dspi { status = "okay"; - dflash0: n25q512a { + dflash0: n25q512a@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p80"; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index ec3eb8e33a3a..8d477dcbfa58 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/hi3660-clock.h> +#include <dt-bindings/thermal/thermal.h> / { compatible = "hisilicon,hi3660"; @@ -62,6 +63,10 @@ next-level-cache = <&A53_L2>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <592>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; + dynamic-power-coefficient = <110>; }; cpu1: cpu@1 { @@ -72,6 +77,8 @@ next-level-cache = <&A53_L2>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <592>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; + operating-points-v2 = <&cluster0_opp>; }; cpu2: cpu@2 { @@ -82,6 +89,8 @@ next-level-cache = <&A53_L2>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <592>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; + operating-points-v2 = <&cluster0_opp>; }; cpu3: cpu@3 { @@ -92,6 +101,8 @@ next-level-cache = <&A53_L2>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <592>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER0>; + operating-points-v2 = <&cluster0_opp>; }; cpu4: cpu@100 { @@ -102,6 +113,10 @@ next-level-cache = <&A73_L2>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; + operating-points-v2 = <&cluster1_opp>; + #cooling-cells = <2>; + dynamic-power-coefficient = <550>; }; cpu5: cpu@101 { @@ -112,6 +127,8 @@ next-level-cache = <&A73_L2>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; + operating-points-v2 = <&cluster1_opp>; }; cpu6: cpu@102 { @@ -122,6 +139,8 @@ next-level-cache = <&A73_L2>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; + operating-points-v2 = <&cluster1_opp>; }; cpu7: cpu@103 { @@ -132,6 +151,8 @@ next-level-cache = <&A73_L2>; cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; + clocks = <&stub_clock HI3660_CLK_STUB_CLUSTER1>; + operating-points-v2 = <&cluster1_opp>; }; idle-states { @@ -174,6 +195,76 @@ }; }; + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <533000000>; + opp-microvolt = <700000>; + clock-latency-ns = <300000>; + }; + + opp01 { + opp-hz = /bits/ 64 <999000000>; + opp-microvolt = <800000>; + clock-latency-ns = <300000>; + }; + + opp02 { + opp-hz = /bits/ 64 <1402000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + }; + + opp03 { + opp-hz = /bits/ 64 <1709000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <300000>; + }; + + opp04 { + opp-hz = /bits/ 64 <1844000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + }; + }; + + cluster1_opp: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp10 { + opp-hz = /bits/ 64 <903000000>; + opp-microvolt = <700000>; + clock-latency-ns = <300000>; + }; + + opp11 { + opp-hz = /bits/ 64 <1421000000>; + opp-microvolt = <800000>; + clock-latency-ns = <300000>; + }; + + opp12 { + opp-hz = /bits/ 64 <1805000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + }; + + opp13 { + opp-hz = /bits/ 64 <2112000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <300000>; + }; + + opp14 { + opp-hz = /bits/ 64 <2362000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <300000>; + }; + }; + gic: interrupt-controller@e82b0000 { compatible = "arm,gic-400"; reg = <0x0 0xe82b1000 0 0x1000>, /* GICD */ @@ -274,6 +365,21 @@ #reset-cells = <2>; }; + mailbox: mailbox@e896b000 { + compatible = "hisilicon,hi3660-mbox"; + reg = <0x0 0xe896b000 0x0 0x1000>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <3>; + }; + + stub_clock: stub_clock@e896b500 { + compatible = "hisilicon,hi3660-stub-clk"; + reg = <0x0 0xe896b500 0x0 0x0100>; + #clock-cells = <1>; + mboxes = <&mailbox 13 3 0>; + }; + dual_timer0: timer@fff14000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x0 0xfff14000 0x0 0x1000>; @@ -872,6 +978,8 @@ 0x0 0x02000000>; num-lanes = <1>; #interrupt-cells = <1>; + interrupts = <0 283 4>; + interrupt-names = "msi"; interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = <0x0 0 0 1 &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, @@ -972,5 +1080,44 @@ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; #thermal-sensor-cells = <1>; }; + + thermal-zones { + + cls0: cls0 { + polling-delay = <1000>; + polling-delay-passive = <100>; + sustainable-power = <4500>; + + /* sensor ID */ + thermal-sensors = <&tsensor 1>; + + trips { + threshold: trip-point@0 { + temperature = <65000>; + hysteresis = <1000>; + type = "passive"; + }; + + target: trip-point@1 { + temperature = <75000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&target>; + contribution = <1024>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&target>; + contribution = <512>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts index 4d5d644abb12..d30f6eb8a5ee 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts @@ -11,6 +11,7 @@ #include <dt-bindings/gpio/gpio.h> #include "hi3798cv200.dtsi" +#include "poplar-pinctrl.dtsi" / { model = "HiSilicon Poplar Development Board"; @@ -61,6 +62,33 @@ default-state = "off"; }; }; + + reg_pcie: regulator-pcie { + compatible = "regulator-fixed"; + regulator-name = "3V3_PCIE0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio6 7 0>; + enable-active-high; + }; +}; + +&ehci { + status = "okay"; +}; + +&emmc { + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins_1 &emmc_pins_2 + &emmc_pins_3 &emmc_pins_4>; + fifo-depth = <256>; + clock-frequency = <200000000>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + bus-width = <8>; + status = "okay"; }; &gmac1 { @@ -146,6 +174,16 @@ status = "okay"; }; +&ohci { + status = "okay"; +}; + +&pcie { + reset-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; + vpcie-supply = <®_pcie>; + status = "okay"; +}; + &sd0 { bus-width = <4>; cap-sd-highspeed; diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi index 962bd79139e4..7c0fddd7c8cf 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi @@ -8,7 +8,9 @@ */ #include <dt-bindings/clock/histb-clock.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/phy/phy.h> #include <dt-bindings/reset/ti-syscon.h> / { @@ -106,6 +108,113 @@ #reset-cells = <2>; }; + perictrl: peripheral-controller@8a20000 { + compatible = "hisilicon,hi3798cv200-perictrl", "syscon", + "simple-mfd"; + reg = <0x8a20000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8a20000 0x1000>; + + usb2_phy1: usb2-phy@120 { + compatible = "hisilicon,hi3798cv200-usb2-phy"; + reg = <0x120 0x4>; + clocks = <&crg HISTB_USB2_PHY1_REF_CLK>; + resets = <&crg 0xbc 4>; + #address-cells = <1>; + #size-cells = <0>; + + usb2_phy1_port0: phy@0 { + reg = <0>; + #phy-cells = <0>; + resets = <&crg 0xbc 8>; + }; + + usb2_phy1_port1: phy@1 { + reg = <1>; + #phy-cells = <0>; + resets = <&crg 0xbc 9>; + }; + }; + + usb2_phy2: usb2-phy@124 { + compatible = "hisilicon,hi3798cv200-usb2-phy"; + reg = <0x124 0x4>; + clocks = <&crg HISTB_USB2_PHY2_REF_CLK>; + resets = <&crg 0xbc 6>; + #address-cells = <1>; + #size-cells = <0>; + + usb2_phy2_port0: phy@0 { + reg = <0>; + #phy-cells = <0>; + resets = <&crg 0xbc 10>; + }; + }; + + combphy0: phy@850 { + compatible = "hisilicon,hi3798cv200-combphy"; + reg = <0x850 0x8>; + #phy-cells = <1>; + clocks = <&crg HISTB_COMBPHY0_CLK>; + resets = <&crg 0x188 4>; + assigned-clocks = <&crg HISTB_COMBPHY0_CLK>; + assigned-clock-rates = <100000000>; + hisilicon,fixed-mode = <PHY_TYPE_USB3>; + }; + + combphy1: phy@858 { + compatible = "hisilicon,hi3798cv200-combphy"; + reg = <0x858 0x8>; + #phy-cells = <1>; + clocks = <&crg HISTB_COMBPHY1_CLK>; + resets = <&crg 0x188 12>; + assigned-clocks = <&crg HISTB_COMBPHY1_CLK>; + assigned-clock-rates = <100000000>; + hisilicon,mode-select-bits = <0x0008 11 (0x3 << 11)>; + }; + }; + + pmx0: pinconf@8a21000 { + compatible = "pinconf-single"; + reg = <0x8a21000 0x180>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <7>; + pinctrl-single,gpio-range = < + &range 0 8 2 /* GPIO 0 */ + &range 8 1 0 /* GPIO 1 */ + &range 9 4 2 + &range 13 1 0 + &range 14 1 1 + &range 15 1 0 + &range 16 5 0 /* GPIO 2 */ + &range 21 3 1 + &range 24 4 1 /* GPIO 3 */ + &range 28 2 2 + &range 86 1 1 + &range 87 1 0 + &range 30 4 2 /* GPIO 4 */ + &range 34 3 0 + &range 37 1 2 + &range 38 3 2 /* GPIO 6 */ + &range 41 5 0 + &range 46 8 1 /* GPIO 7 */ + &range 54 8 1 /* GPIO 8 */ + &range 64 7 1 /* GPIO 9 */ + &range 71 1 0 + &range 72 6 1 /* GPIO 10 */ + &range 78 1 0 + &range 79 1 1 + &range 80 6 1 /* GPIO 11 */ + &range 70 2 1 + &range 88 8 0 /* GPIO 12 */ + >; + + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + }; + uart0: serial@8b00000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x8b00000 0x1000>; @@ -205,12 +314,17 @@ }; emmc: mmc@9830000 { - compatible = "snps,dw-mshc"; + compatible = "hisilicon,hi3798cv200-dw-mshc"; reg = <0x9830000 0x10000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clocks = <&crg HISTB_MMC_CIU_CLK>, - <&crg HISTB_MMC_BIU_CLK>; - clock-names = "ciu", "biu"; + <&crg HISTB_MMC_BIU_CLK>, + <&crg HISTB_MMC_SAMPLE_CLK>, + <&crg HISTB_MMC_DRV_CLK>; + clock-names = "ciu", "biu", "ciu-sample", "ciu-drive"; + resets = <&crg 0xa0 4>; + reset-names = "reset"; + status = "disabled"; }; gpio0: gpio@8b20000 { @@ -221,6 +335,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&pmx0 0 0 8>; clocks = <&crg HISTB_APB_CLK>; clock-names = "apb_pclk"; status = "disabled"; @@ -234,6 +349,13 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = < + &pmx0 0 8 1 + &pmx0 1 9 4 + &pmx0 5 13 1 + &pmx0 6 14 1 + &pmx0 7 15 1 + >; clocks = <&crg HISTB_APB_CLK>; clock-names = "apb_pclk"; status = "disabled"; @@ -247,6 +369,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&pmx0 0 16 5 &pmx0 5 21 3>; clocks = <&crg HISTB_APB_CLK>; clock-names = "apb_pclk"; status = "disabled"; @@ -260,6 +383,12 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = < + &pmx0 0 24 4 + &pmx0 4 28 2 + &pmx0 6 86 1 + &pmx0 7 87 1 + >; clocks = <&crg HISTB_APB_CLK>; clock-names = "apb_pclk"; status = "disabled"; @@ -273,6 +402,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&pmx0 0 30 4 &pmx0 4 34 3 &pmx0 7 37 1>; clocks = <&crg HISTB_APB_CLK>; clock-names = "apb_pclk"; status = "disabled"; @@ -299,6 +429,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&pmx0 0 38 3 &pmx0 0 41 5>; clocks = <&crg HISTB_APB_CLK>; clock-names = "apb_pclk"; status = "disabled"; @@ -312,6 +443,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&pmx0 0 46 8>; clocks = <&crg HISTB_APB_CLK>; clock-names = "apb_pclk"; status = "disabled"; @@ -325,6 +457,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&pmx0 0 54 8>; clocks = <&crg HISTB_APB_CLK>; clock-names = "apb_pclk"; status = "disabled"; @@ -338,6 +471,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&pmx0 0 64 7 &pmx0 71 1>; clocks = <&crg HISTB_APB_CLK>; clock-names = "apb_pclk"; status = "disabled"; @@ -351,6 +485,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&pmx0 0 72 6 &pmx0 6 78 1 &pmx0 7 79 1>; clocks = <&crg HISTB_APB_CLK>; clock-names = "apb_pclk"; status = "disabled"; @@ -364,6 +499,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&pmx0 0 80 6 &pmx0 6 70 2>; clocks = <&crg HISTB_APB_CLK>; clock-names = "apb_pclk"; status = "disabled"; @@ -377,6 +513,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&pmx0 0 88 8>; clocks = <&crg HISTB_APB_CLK>; clock-names = "apb_pclk"; status = "disabled"; @@ -419,5 +556,67 @@ clocks = <&sysctrl HISTB_IR_CLK>; status = "disabled"; }; + + pcie: pcie@9860000 { + compatible = "hisilicon,hi3798cv200-pcie"; + reg = <0x9860000 0x1000>, + <0x0 0x2000>, + <0x2000000 0x01000000>; + reg-names = "control", "rc-dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0 15>; + num-lanes = <1>; + ranges = <0x81000000 0x0 0x00000000 0x4f00000 0x0 0x100000 + 0x82000000 0x0 0x3000000 0x3000000 0x0 0x01f00000>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic 0 131 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HISTB_PCIE_AUX_CLK>, + <&crg HISTB_PCIE_PIPE_CLK>, + <&crg HISTB_PCIE_SYS_CLK>, + <&crg HISTB_PCIE_BUS_CLK>; + clock-names = "aux", "pipe", "sys", "bus"; + resets = <&crg 0x18c 6>, <&crg 0x18c 5>, <&crg 0x18c 4>; + reset-names = "soft", "sys", "bus"; + phys = <&combphy1 PHY_TYPE_PCIE>; + phy-names = "phy"; + status = "disabled"; + }; + + ohci: ohci@9880000 { + compatible = "generic-ohci"; + reg = <0x9880000 0x10000>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HISTB_USB2_BUS_CLK>, + <&crg HISTB_USB2_12M_CLK>, + <&crg HISTB_USB2_48M_CLK>; + clock-names = "bus", "clk12", "clk48"; + resets = <&crg 0xb8 12>; + reset-names = "bus"; + phys = <&usb2_phy1_port0>; + phy-names = "usb"; + status = "disabled"; + }; + + ehci: ehci@9890000 { + compatible = "generic-ehci"; + reg = <0x9890000 0x10000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HISTB_USB2_BUS_CLK>, + <&crg HISTB_USB2_PHY_CLK>, + <&crg HISTB_USB2_UTMI_CLK>; + clock-names = "bus", "phy", "utmi"; + resets = <&crg 0xb8 12>, + <&crg 0xb8 16>, + <&crg 0xb8 13>; + reset-names = "bus", "phy", "utmi"; + phys = <&usb2_phy1_port0>; + phy-names = "usb"; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts index 9af633021a42..a95c6f5619bf 100644 --- a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts +++ b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts @@ -25,6 +25,14 @@ chosen { }; }; +&ipmi0 { + status = "ok"; +}; + +&uart0 { + status = "ok"; +}; + ð0 { status = "ok"; }; diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi index 35202ebe62a7..d78a6a755d03 100644 --- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi @@ -350,6 +350,27 @@ #size-cells = <2>; ranges; + isa@a01b0000 { + compatible = "hisilicon,hip06-lpc"; + #size-cells = <1>; + #address-cells = <2>; + reg = <0x0 0xa01b0000 0x0 0x1000>; + + ipmi0: bt@e4 { + compatible = "ipmi-bt"; + device_type = "ipmi"; + reg = <0x01 0xe4 0x04>; + status = "disabled"; + }; + + uart0: lpc-uart@2f8 { + compatible = "ns16550a"; + clock-frequency = <1843200>; + reg = <0x01 0x2f8 0x08>; + status = "disabled"; + }; + }; + refclk: refclk { compatible = "fixed-clock"; clock-frequency = <50000000>; diff --git a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts index fe7c16c36025..21147e8e3f94 100644 --- a/arch/arm64/boot/dts/hisilicon/hip07-d05.dts +++ b/arch/arm64/boot/dts/hisilicon/hip07-d05.dts @@ -57,6 +57,10 @@ status = "ok"; }; +&ipmi0 { + status = "ok"; +}; + &usb_ohci { status = "ok"; }; diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi index 0600a6a84ab7..9c10030a07f8 100644 --- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi @@ -1114,6 +1114,20 @@ #size-cells = <2>; ranges; + isa@a01b0000 { + compatible = "hisilicon,hip07-lpc"; + #size-cells = <1>; + #address-cells = <2>; + reg = <0x0 0xa01b0000 0x0 0x1000>; + + ipmi0: bt@e4 { + compatible = "ipmi-bt"; + device_type = "ipmi"; + reg = <0x01 0xe4 0x04>; + status = "disabled"; + }; + }; + uart0: uart@602b0000 { compatible = "arm,sbsa-uart"; reg = <0x0 0x602b0000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/hisilicon/poplar-pinctrl.dtsi b/arch/arm64/boot/dts/hisilicon/poplar-pinctrl.dtsi new file mode 100644 index 000000000000..7bb19e4b084a --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/poplar-pinctrl.dtsi @@ -0,0 +1,98 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Pinctrl dts file for HiSilicon Poplar board + * + * Copyright (c) 2016-2018 HiSilicon Technologies Co., Ltd. + */ + +#include <dt-bindings/pinctrl/hisi.h> + +/* value, enable bits, disable bits, mask */ +#define PINCTRL_PULLDOWN(value, enable, disable, mask) \ + (value << 13) (enable << 13) (disable << 13) (mask << 13) +#define PINCTRL_PULLUP(value, enable, disable, mask) \ + (value << 12) (enable << 12) (disable << 12) (mask << 12) +#define PINCTRL_SLEW_RATE(value, mask) (value << 8) (mask << 8) +#define PINCTRL_DRV_STRENGTH(value, mask) (value << 4) (mask << 4) + +&pmx0 { + emmc_pins_1: emmc-pins-1 { + pinctrl-single,pins = < + 0x000 MUX_M2 + 0x004 MUX_M2 + 0x008 MUX_M2 + 0x00c MUX_M2 + 0x010 MUX_M2 + 0x014 MUX_M2 + 0x018 MUX_M2 + 0x01c MUX_M2 + 0x024 MUX_M2 + >; + pinctrl-single,bias-pulldown = < + PINCTRL_PULLDOWN(0, 1, 0, 1) + >; + pinctrl-single,bias-pullup = < + PINCTRL_PULLUP(0, 1, 0, 1) + >; + pinctrl-single,slew-rate = < + PINCTRL_SLEW_RATE(1, 1) + >; + pinctrl-single,drive-strength = < + PINCTRL_DRV_STRENGTH(0xb, 0xf) + >; + }; + + emmc_pins_2: emmc-pins-2 { + pinctrl-single,pins = < + 0x028 MUX_M2 + >; + pinctrl-single,bias-pulldown = < + PINCTRL_PULLDOWN(0, 1, 0, 1) + >; + pinctrl-single,bias-pullup = < + PINCTRL_PULLUP(0, 1, 0, 1) + >; + pinctrl-single,slew-rate = < + PINCTRL_SLEW_RATE(1, 1) + >; + pinctrl-single,drive-strength = < + PINCTRL_DRV_STRENGTH(0x9, 0xf) + >; + }; + + emmc_pins_3: emmc-pins-3 { + pinctrl-single,pins = < + 0x02c MUX_M2 + >; + pinctrl-single,bias-pulldown = < + PINCTRL_PULLDOWN(0, 1, 0, 1) + >; + pinctrl-single,bias-pullup = < + PINCTRL_PULLUP(0, 1, 0, 1) + >; + pinctrl-single,slew-rate = < + PINCTRL_SLEW_RATE(1, 1) + >; + pinctrl-single,drive-strength = < + PINCTRL_DRV_STRENGTH(3, 3) + >; + }; + + emmc_pins_4: emmc-pins-4 { + pinctrl-single,pins = < + 0x030 MUX_M2 + >; + pinctrl-single,bias-pulldown = < + PINCTRL_PULLDOWN(1, 1, 0, 1) + >; + pinctrl-single,bias-pullup = < + PINCTRL_PULLUP(0, 1, 0, 1) + >; + pinctrl-single,slew-rate = < + PINCTRL_SLEW_RATE(1, 1) + >; + pinctrl-single,drive-strength = < + PINCTRL_DRV_STRENGTH(3, 3) + >; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index cb454beede55..ea9d49f2a911 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -1,8 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 -# Berlin SoC Family -dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-dmp.dtb -dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-stb.dtb - # Mvebu SoC Family dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts index ef7fd2ca2515..3ab25ad402b9 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts @@ -63,6 +63,33 @@ status = "okay"; }; +&spi0 { + status = "okay"; + + flash@0 { + reg = <0>; + compatible = "winbond,w25q32dw", "jedec,spi-flash"; + spi-max-frequency = <104000000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0 0x180000>; + }; + + partition@180000 { + label = "ubootenv"; + reg = <0x180000 0x10000>; + }; + }; + }; +}; + /* Exported on the micro USB connector J5 through an FTDI */ &uart0 { pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 97207a61bc79..3353252d78a0 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -148,10 +148,13 @@ compatible = "marvell,armada3710-nb-pinctrl", "syscon", "simple-mfd"; reg = <0x13800 0x100>, <0x13C00 0x20>; + /* MPP1[19:0] */ gpionb: gpio { #gpio-cells = <2>; gpio-ranges = <&pinctrl_nb 0 0 36>; gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, @@ -209,10 +212,13 @@ compatible = "marvell,armada3710-sb-pinctrl", "syscon", "simple-mfd"; reg = <0x18800 0x100>, <0x18C00 0x20>; + /* MPP2[23:0] */ gpiosb: gpio { #gpio-cells = <2>; gpio-ranges = <&pinctrl_sb 0 0 30>; gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts index d6bec058a30a..412efdb46e7c 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -242,6 +242,11 @@ phy-mode = "10gbase-kr"; /* Generic PHY, providing serdes lanes */ phys = <&cp0_comphy2 0>; + + fixed-link { + speed = <10000>; + full-duplex; + }; }; &cp0_eth1 { diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index 5689fb23bbab..1bac437369a1 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -177,6 +177,11 @@ &cp0_eth0 { status = "okay"; phy-mode = "10gbase-kr"; + + fixed-link { + speed = <10000>; + full-duplex; + }; }; &cp0_eth2 { @@ -303,6 +308,11 @@ &cp1_eth0 { status = "okay"; phy-mode = "10gbase-kr"; + + fixed-link { + speed = <10000>; + full-duplex; + }; }; &cp1_eth1 { diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts index 81de03ef860d..a66958ff4de6 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts @@ -27,6 +27,7 @@ ethernet0 = &cp0_eth0; ethernet1 = &cp1_eth0; ethernet2 = &cp1_eth1; + ethernet3 = &cp1_eth2; }; /* Regulator labels correspond with schematics */ @@ -64,6 +65,42 @@ compatible = "usb-nop-xceiv"; vcc-supply = <&v_5v0_usb3_hst_vbus>; }; + + sfp_eth0: sfp-eth0 { + /* CON15,16 - CPM lane 4 */ + compatible = "sff,sfp"; + i2c-bus = <&sfpp0_i2c>; + los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_sfpp0_pins>; + }; + + sfp_eth1: sfp-eth1 { + /* CON17,18 - CPS lane 4 */ + compatible = "sff,sfp"; + i2c-bus = <&sfpp1_i2c>; + los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>; + }; + + sfp_eth3: sfp-eth3 { + /* CON3,4 - CPS lane 5 */ + compatible = "sff,sfp"; + i2c-bus = <&sfp_1g_i2c>; + los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>; + }; }; &uart0 { @@ -171,6 +208,10 @@ marvell,pins = "mpp47"; marvell,function = "gpio"; }; + cp0_sfp_1g_pins: sfp-1g-pins { + marvell,pins = "mpp51", "mpp53", "mpp54"; + marvell,function = "gpio"; + }; cp0_pcie_pins: pcie-pins { marvell,pins = "mpp52"; marvell,function = "gpio"; @@ -180,6 +221,10 @@ "mpp60", "mpp61"; marvell,function = "sdio"; }; + cp0_sfpp1_pins: sfpp1-pins { + marvell,pins = "mpp62"; + marvell,function = "gpio"; + }; }; &cp0_xmdio { @@ -188,11 +233,13 @@ phy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c45"; reg = <0>; + sfp = <&sfp_eth0>; }; phy8: ethernet-phy@8 { compatible = "ethernet-phy-ieee802.3-c45"; reg = <8>; + sfp = <&sfp_eth1>; }; }; @@ -257,7 +304,22 @@ phys = <&cp1_comphy0 1>; }; +&cp1_eth2 { + /* CPS Lane 5 */ + status = "okay"; + /* Network PHY */ + phy-mode = "2500base-x"; + managed = "in-band-status"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy5 2>; + sfp = <&sfp_eth3>; +}; + &cp1_pinctrl { + cp1_sfpp1_pins: sfpp1-pins { + marvell,pins = "mpp8", "mpp10", "mpp11"; + marvell,function = "gpio"; + }; cp1_spi1_pins: spi1-pins { marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16"; marvell,function = "spi1"; @@ -266,6 +328,14 @@ marvell,pins = "mpp6", "mpp7"; marvell,function = "uart0"; }; + cp1_sfp_1g_pins: sfp-1g-pins { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + cp1_sfpp0_pins: sfpp0-pins { + marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29"; + marvell,function = "gpio"; + }; }; /* J27 UART header */ diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi index ed2f1237ea1e..7dabe25f6774 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi @@ -236,6 +236,7 @@ compatible = "marvell,armada-8k-ahci", "generic-ahci"; reg = <0x540000 0x30000>; + dma-coherent; interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&CP110_LABEL(clk) 1 15>, <&CP110_LABEL(clk) 1 16>; diff --git a/arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts b/arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts deleted file mode 100644 index fae6c6924705..000000000000 --- a/arch/arm64/boot/dts/marvell/berlin4ct-dmp.dts +++ /dev/null @@ -1,66 +0,0 @@ -/* - * Copyright (C) 2015 Marvell Technology Group Ltd. - * - * Author: Jisheng Zhang <jszhang@marvell.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; - -#include "berlin4ct.dtsi" - -/ { - model = "Marvell BG4CT DMP board"; - compatible = "marvell,berlin4ct-dmp", "marvell,berlin4ct", "marvell,berlin"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@1000000 { - device_type = "memory"; - /* the first 16MB is for firmwares' usage */ - reg = <0 0x01000000 0 0x7f000000>; - }; -}; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts b/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts deleted file mode 100644 index d47edad13e68..000000000000 --- a/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts +++ /dev/null @@ -1,66 +0,0 @@ -/* - * Copyright (C) 2015 Marvell Technology Group Ltd. - * - * Author: Jisheng Zhang <jszhang@marvell.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; - -#include "berlin4ct.dtsi" - -/ { - model = "Marvell BG4CT STB board"; - compatible = "marvell,berlin4ct-stb", "marvell,berlin4ct", "marvell,berlin"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@1000000 { - device_type = "memory"; - /* the first 16MB is for firmwares' usage */ - reg = <0 0x01000000 0 0x7f000000>; - }; -}; - -&uart0 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/mediatek/mt2712-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt2712-pinfunc.h new file mode 100644 index 000000000000..1b4cb0c55744 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt2712-pinfunc.h @@ -0,0 +1,1123 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 MediaTek Inc. + * Author: Zhiyong Tao <zhiyong.tao@mediatek.com> + * + */ +#ifndef __DTS_MT2712_PINFUNC_H +#define __DTS_MT2712_PINFUNC_H + +#include <dt-bindings/pinctrl/mt65xx.h> + +#define MT2712_PIN_0_EINT0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0) +#define MT2712_PIN_0_EINT0__FUNC_EINT0 (MTK_PIN_NO(0) | 1) +#define MT2712_PIN_0_EINT0__FUNC_MBIST_DIAG_SCANOUT (MTK_PIN_NO(0) | 2) +#define MT2712_PIN_0_EINT0__FUNC_DSIA_TE (MTK_PIN_NO(0) | 3) +#define MT2712_PIN_0_EINT0__FUNC_DSIC_TE (MTK_PIN_NO(0) | 4) +#define MT2712_PIN_0_EINT0__FUNC_DIN_D3 (MTK_PIN_NO(0) | 5) +#define MT2712_PIN_0_EINT0__FUNC_PURE_HW_PROTECT (MTK_PIN_NO(0) | 6) + +#define MT2712_PIN_1_EINT1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0) +#define MT2712_PIN_1_EINT1__FUNC_EINT1 (MTK_PIN_NO(1) | 1) +#define MT2712_PIN_1_EINT1__FUNC_IR_IN (MTK_PIN_NO(1) | 2) +#define MT2712_PIN_1_EINT1__FUNC_DSIB_TE (MTK_PIN_NO(1) | 3) +#define MT2712_PIN_1_EINT1__FUNC_DSID_TE (MTK_PIN_NO(1) | 4) +#define MT2712_PIN_1_EINT1__FUNC_DIN_D4 (MTK_PIN_NO(1) | 5) + +#define MT2712_PIN_2_EINT2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0) +#define MT2712_PIN_2_EINT2__FUNC_EINT2 (MTK_PIN_NO(2) | 1) +#define MT2712_PIN_2_EINT2__FUNC_IR_IN (MTK_PIN_NO(2) | 2) +#define MT2712_PIN_2_EINT2__FUNC_LCM_RST1 (MTK_PIN_NO(2) | 3) +#define MT2712_PIN_2_EINT2__FUNC_DIN_D5 (MTK_PIN_NO(2) | 5) + +#define MT2712_PIN_3_EINT3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0) +#define MT2712_PIN_3_EINT3__FUNC_EINT3 (MTK_PIN_NO(3) | 1) +#define MT2712_PIN_3_EINT3__FUNC_IR_IN (MTK_PIN_NO(3) | 2) +#define MT2712_PIN_3_EINT3__FUNC_LCM_RST0 (MTK_PIN_NO(3) | 3) +#define MT2712_PIN_3_EINT3__FUNC_DIN_D6 (MTK_PIN_NO(3) | 5) + +#define MT2712_PIN_4_PWM0__FUNC_GPIO4 (MTK_PIN_NO(4) | 0) +#define MT2712_PIN_4_PWM0__FUNC_PWM0 (MTK_PIN_NO(4) | 1) +#define MT2712_PIN_4_PWM0__FUNC_DISP0_PWM (MTK_PIN_NO(4) | 2) +#define MT2712_PIN_4_PWM0__FUNC_DISP1_PWM (MTK_PIN_NO(4) | 3) +#define MT2712_PIN_4_PWM0__FUNC_DIN_CLK (MTK_PIN_NO(4) | 5) + +#define MT2712_PIN_5_PWM1__FUNC_GPIO5 (MTK_PIN_NO(5) | 0) +#define MT2712_PIN_5_PWM1__FUNC_PWM1 (MTK_PIN_NO(5) | 1) +#define MT2712_PIN_5_PWM1__FUNC_DISP1_PWM (MTK_PIN_NO(5) | 2) +#define MT2712_PIN_5_PWM1__FUNC_DISP0_PWM (MTK_PIN_NO(5) | 3) +#define MT2712_PIN_5_PWM1__FUNC_DIN_VSYNC (MTK_PIN_NO(5) | 5) + +#define MT2712_PIN_6_PWM2__FUNC_GPIO6 (MTK_PIN_NO(6) | 0) +#define MT2712_PIN_6_PWM2__FUNC_PWM2 (MTK_PIN_NO(6) | 1) +#define MT2712_PIN_6_PWM2__FUNC_DISP0_PWM (MTK_PIN_NO(6) | 2) +#define MT2712_PIN_6_PWM2__FUNC_DISP1_PWM (MTK_PIN_NO(6) | 3) +#define MT2712_PIN_6_PWM2__FUNC_DISP2_PWM (MTK_PIN_NO(6) | 4) +#define MT2712_PIN_6_PWM2__FUNC_DIN_HSYNC (MTK_PIN_NO(6) | 5) + +#define MT2712_PIN_7_PWM3__FUNC_GPIO7 (MTK_PIN_NO(7) | 0) +#define MT2712_PIN_7_PWM3__FUNC_PWM3 (MTK_PIN_NO(7) | 1) +#define MT2712_PIN_7_PWM3__FUNC_DISP1_PWM (MTK_PIN_NO(7) | 2) +#define MT2712_PIN_7_PWM3__FUNC_DISP0_PWM (MTK_PIN_NO(7) | 3) +#define MT2712_PIN_7_PWM3__FUNC_LCM_RST2 (MTK_PIN_NO(7) | 4) +#define MT2712_PIN_7_PWM3__FUNC_DIN_D0 (MTK_PIN_NO(7) | 5) + +#define MT2712_PIN_8_PWM4__FUNC_GPIO8 (MTK_PIN_NO(8) | 0) +#define MT2712_PIN_8_PWM4__FUNC_PWM4 (MTK_PIN_NO(8) | 1) +#define MT2712_PIN_8_PWM4__FUNC_DISP0_PWM (MTK_PIN_NO(8) | 2) +#define MT2712_PIN_8_PWM4__FUNC_DISP1_PWM (MTK_PIN_NO(8) | 3) +#define MT2712_PIN_8_PWM4__FUNC_DSIA_TE (MTK_PIN_NO(8) | 4) +#define MT2712_PIN_8_PWM4__FUNC_DIN_D1 (MTK_PIN_NO(8) | 5) + +#define MT2712_PIN_9_PWM5__FUNC_GPIO9 (MTK_PIN_NO(9) | 0) +#define MT2712_PIN_9_PWM5__FUNC_PWM5 (MTK_PIN_NO(9) | 1) +#define MT2712_PIN_9_PWM5__FUNC_DISP1_PWM (MTK_PIN_NO(9) | 2) +#define MT2712_PIN_9_PWM5__FUNC_DISP0_PWM (MTK_PIN_NO(9) | 3) +#define MT2712_PIN_9_PWM5__FUNC_DSIB_TE (MTK_PIN_NO(9) | 4) +#define MT2712_PIN_9_PWM5__FUNC_DIN_D2 (MTK_PIN_NO(9) | 5) + +#define MT2712_PIN_10_PWM6__FUNC_GPIO10 (MTK_PIN_NO(10) | 0) +#define MT2712_PIN_10_PWM6__FUNC_PWM6 (MTK_PIN_NO(10) | 1) +#define MT2712_PIN_10_PWM6__FUNC_DISP0_PWM (MTK_PIN_NO(10) | 2) +#define MT2712_PIN_10_PWM6__FUNC_DISP1_PWM (MTK_PIN_NO(10) | 3) +#define MT2712_PIN_10_PWM6__FUNC_LCM_RST0 (MTK_PIN_NO(10) | 4) + +#define MT2712_PIN_11_PWM7__FUNC_GPIO11 (MTK_PIN_NO(11) | 0) +#define MT2712_PIN_11_PWM7__FUNC_PWM7 (MTK_PIN_NO(11) | 1) +#define MT2712_PIN_11_PWM7__FUNC_DISP1_PWM (MTK_PIN_NO(11) | 2) +#define MT2712_PIN_11_PWM7__FUNC_DISP0_PWM (MTK_PIN_NO(11) | 3) +#define MT2712_PIN_11_PWM7__FUNC_LCM_RST1 (MTK_PIN_NO(11) | 4) + +#define MT2712_PIN_12_IDDIG_P0__FUNC_GPIO12 (MTK_PIN_NO(12) | 0) +#define MT2712_PIN_12_IDDIG_P0__FUNC_IDDIG_A (MTK_PIN_NO(12) | 1) +#define MT2712_PIN_12_IDDIG_P0__FUNC_DIN_D7 (MTK_PIN_NO(12) | 5) + +#define MT2712_PIN_13_DRV_VBUS_P0__FUNC_GPIO13 (MTK_PIN_NO(13) | 0) +#define MT2712_PIN_13_DRV_VBUS_P0__FUNC_DRV_VBUS_A (MTK_PIN_NO(13) | 1) + +#define MT2712_PIN_14_IDDIG_P1__FUNC_GPIO14 (MTK_PIN_NO(14) | 0) +#define MT2712_PIN_14_IDDIG_P1__FUNC_IDDIG_B (MTK_PIN_NO(14) | 1) + +#define MT2712_PIN_15_DRV_VBUS_P1__FUNC_GPIO15 (MTK_PIN_NO(15) | 0) +#define MT2712_PIN_15_DRV_VBUS_P1__FUNC_DRV_VBUS_B (MTK_PIN_NO(15) | 1) + +#define MT2712_PIN_16_DRV_VBUS_P2__FUNC_GPIO16 (MTK_PIN_NO(16) | 0) +#define MT2712_PIN_16_DRV_VBUS_P2__FUNC_DRV_VBUS_C (MTK_PIN_NO(16) | 1) + +#define MT2712_PIN_17_DRV_VBUS_P3__FUNC_GPIO17 (MTK_PIN_NO(17) | 0) +#define MT2712_PIN_17_DRV_VBUS_P3__FUNC_DRV_VBUS_D (MTK_PIN_NO(17) | 1) + +#define MT2712_PIN_18_KPROW0__FUNC_GPIO18 (MTK_PIN_NO(18) | 0) +#define MT2712_PIN_18_KPROW0__FUNC_KROW0 (MTK_PIN_NO(18) | 1) + +#define MT2712_PIN_19_KPCOL0__FUNC_GPIO19 (MTK_PIN_NO(19) | 0) +#define MT2712_PIN_19_KPCOL0__FUNC_KCOL0 (MTK_PIN_NO(19) | 1) + +#define MT2712_PIN_20_KPROW1__FUNC_GPIO20 (MTK_PIN_NO(20) | 0) +#define MT2712_PIN_20_KPROW1__FUNC_KROW1 (MTK_PIN_NO(20) | 1) + +#define MT2712_PIN_21_KPCOL1__FUNC_GPIO21 (MTK_PIN_NO(21) | 0) +#define MT2712_PIN_21_KPCOL1__FUNC_KCOL1 (MTK_PIN_NO(21) | 1) + +#define MT2712_PIN_22_KPROW2__FUNC_GPIO22 (MTK_PIN_NO(22) | 0) +#define MT2712_PIN_22_KPROW2__FUNC_KROW2 (MTK_PIN_NO(22) | 1) +#define MT2712_PIN_22_KPROW2__FUNC_DISP1_PWM (MTK_PIN_NO(22) | 2) + +#define MT2712_PIN_23_KPCOL2__FUNC_GPIO23 (MTK_PIN_NO(23) | 0) +#define MT2712_PIN_23_KPCOL2__FUNC_KCOL2 (MTK_PIN_NO(23) | 1) +#define MT2712_PIN_23_KPCOL2__FUNC_DISP0_PWM (MTK_PIN_NO(23) | 2) + +#define MT2712_PIN_24_CMMCLK__FUNC_GPIO24 (MTK_PIN_NO(24) | 0) +#define MT2712_PIN_24_CMMCLK__FUNC_CMMCLK (MTK_PIN_NO(24) | 1) +#define MT2712_PIN_24_CMMCLK__FUNC_DBG_MON_A_1_ (MTK_PIN_NO(24) | 7) + +#define MT2712_PIN_25_CM2MCLK__FUNC_GPIO25 (MTK_PIN_NO(25) | 0) +#define MT2712_PIN_25_CM2MCLK__FUNC_CM2MCLK (MTK_PIN_NO(25) | 1) +#define MT2712_PIN_25_CM2MCLK__FUNC_DBG_MON_A_2_ (MTK_PIN_NO(25) | 7) + +#define MT2712_PIN_26_PCM_TX__FUNC_GPIO26 (MTK_PIN_NO(26) | 0) +#define MT2712_PIN_26_PCM_TX__FUNC_PCM1_DO (MTK_PIN_NO(26) | 1) +#define MT2712_PIN_26_PCM_TX__FUNC_MRG_TX (MTK_PIN_NO(26) | 2) +#define MT2712_PIN_26_PCM_TX__FUNC_DAI_TX (MTK_PIN_NO(26) | 3) +#define MT2712_PIN_26_PCM_TX__FUNC_MRG_RX (MTK_PIN_NO(26) | 4) +#define MT2712_PIN_26_PCM_TX__FUNC_DAI_RX (MTK_PIN_NO(26) | 5) +#define MT2712_PIN_26_PCM_TX__FUNC_PCM1_DI (MTK_PIN_NO(26) | 6) +#define MT2712_PIN_26_PCM_TX__FUNC_DBG_MON_A_3_ (MTK_PIN_NO(26) | 7) + +#define MT2712_PIN_27_PCM_CLK__FUNC_GPIO27 (MTK_PIN_NO(27) | 0) +#define MT2712_PIN_27_PCM_CLK__FUNC_PCM1_CLK (MTK_PIN_NO(27) | 1) +#define MT2712_PIN_27_PCM_CLK__FUNC_MRG_CLK (MTK_PIN_NO(27) | 2) +#define MT2712_PIN_27_PCM_CLK__FUNC_DAI_CLK (MTK_PIN_NO(27) | 3) +#define MT2712_PIN_27_PCM_CLK__FUNC_DBG_MON_A_4_ (MTK_PIN_NO(27) | 7) + +#define MT2712_PIN_28_PCM_RX__FUNC_GPIO28 (MTK_PIN_NO(28) | 0) +#define MT2712_PIN_28_PCM_RX__FUNC_PCM1_DI (MTK_PIN_NO(28) | 1) +#define MT2712_PIN_28_PCM_RX__FUNC_MRG_RX (MTK_PIN_NO(28) | 2) +#define MT2712_PIN_28_PCM_RX__FUNC_DAI_RX (MTK_PIN_NO(28) | 3) +#define MT2712_PIN_28_PCM_RX__FUNC_MRG_TX (MTK_PIN_NO(28) | 4) +#define MT2712_PIN_28_PCM_RX__FUNC_DAI_TX (MTK_PIN_NO(28) | 5) +#define MT2712_PIN_28_PCM_RX__FUNC_PCM1_DO (MTK_PIN_NO(28) | 6) +#define MT2712_PIN_28_PCM_RX__FUNC_DBG_MON_A_5_ (MTK_PIN_NO(28) | 7) + +#define MT2712_PIN_29_PCM_SYNC__FUNC_GPIO29 (MTK_PIN_NO(29) | 0) +#define MT2712_PIN_29_PCM_SYNC__FUNC_PCM1_SYNC (MTK_PIN_NO(29) | 1) +#define MT2712_PIN_29_PCM_SYNC__FUNC_MRG_SYNC (MTK_PIN_NO(29) | 2) +#define MT2712_PIN_29_PCM_SYNC__FUNC_DAI_SYNC (MTK_PIN_NO(29) | 3) +#define MT2712_PIN_29_PCM_SYNC__FUNC_DBG_MON_A_6_ (MTK_PIN_NO(29) | 7) + +#define MT2712_PIN_30_NCEB0__FUNC_GPIO30 (MTK_PIN_NO(30) | 0) +#define MT2712_PIN_30_NCEB0__FUNC_NCEB0 (MTK_PIN_NO(30) | 1) +#define MT2712_PIN_30_NCEB0__FUNC_USB0_FT_SDA (MTK_PIN_NO(30) | 2) +#define MT2712_PIN_30_NCEB0__FUNC_DBG_MON_A_7_ (MTK_PIN_NO(30) | 7) + +#define MT2712_PIN_31_NCEB1__FUNC_GPIO31 (MTK_PIN_NO(31) | 0) +#define MT2712_PIN_31_NCEB1__FUNC_NCEB1 (MTK_PIN_NO(31) | 1) +#define MT2712_PIN_31_NCEB1__FUNC_USB1_FT_SCL (MTK_PIN_NO(31) | 2) +#define MT2712_PIN_31_NCEB1__FUNC_DBG_MON_A_8_ (MTK_PIN_NO(31) | 7) + +#define MT2712_PIN_32_NF_DQS__FUNC_GPIO32 (MTK_PIN_NO(32) | 0) +#define MT2712_PIN_32_NF_DQS__FUNC_NF_DQS (MTK_PIN_NO(32) | 1) +#define MT2712_PIN_32_NF_DQS__FUNC_USB1_FT_SDA (MTK_PIN_NO(32) | 2) +#define MT2712_PIN_32_NF_DQS__FUNC_DBG_MON_A_9_ (MTK_PIN_NO(32) | 7) + +#define MT2712_PIN_33_NWEB__FUNC_GPIO33 (MTK_PIN_NO(33) | 0) +#define MT2712_PIN_33_NWEB__FUNC_NWEB (MTK_PIN_NO(33) | 1) +#define MT2712_PIN_33_NWEB__FUNC_USB2_FT_SCL (MTK_PIN_NO(33) | 2) +#define MT2712_PIN_33_NWEB__FUNC_DBG_MON_A_10_ (MTK_PIN_NO(33) | 7) + +#define MT2712_PIN_34_NREB__FUNC_GPIO34 (MTK_PIN_NO(34) | 0) +#define MT2712_PIN_34_NREB__FUNC_NREB (MTK_PIN_NO(34) | 1) +#define MT2712_PIN_34_NREB__FUNC_USB2_FT_SDA (MTK_PIN_NO(34) | 2) +#define MT2712_PIN_34_NREB__FUNC_DBG_MON_A_11_ (MTK_PIN_NO(34) | 7) + +#define MT2712_PIN_35_NCLE__FUNC_GPIO35 (MTK_PIN_NO(35) | 0) +#define MT2712_PIN_35_NCLE__FUNC_NCLE (MTK_PIN_NO(35) | 1) +#define MT2712_PIN_35_NCLE__FUNC_USB3_FT_SCL (MTK_PIN_NO(35) | 2) +#define MT2712_PIN_35_NCLE__FUNC_DBG_MON_A_12_ (MTK_PIN_NO(35) | 7) + +#define MT2712_PIN_36_NALE__FUNC_GPIO36 (MTK_PIN_NO(36) | 0) +#define MT2712_PIN_36_NALE__FUNC_NALE (MTK_PIN_NO(36) | 1) +#define MT2712_PIN_36_NALE__FUNC_USB3_FT_SDA (MTK_PIN_NO(36) | 2) +#define MT2712_PIN_36_NALE__FUNC_DBG_MON_A_13_ (MTK_PIN_NO(36) | 7) + +#define MT2712_PIN_37_MSDC0E_CLK__FUNC_GPIO37 (MTK_PIN_NO(37) | 0) +#define MT2712_PIN_37_MSDC0E_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(37) | 1) +#define MT2712_PIN_37_MSDC0E_CLK__FUNC_USB0_FT_SCL (MTK_PIN_NO(37) | 2) +#define MT2712_PIN_37_MSDC0E_CLK__FUNC_DBG_MON_A_0_ (MTK_PIN_NO(37) | 7) + +#define MT2712_PIN_38_MSDC0E_DAT7__FUNC_GPIO38 (MTK_PIN_NO(38) | 0) +#define MT2712_PIN_38_MSDC0E_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(38) | 1) +#define MT2712_PIN_38_MSDC0E_DAT7__FUNC_NAND_ND7 (MTK_PIN_NO(38) | 2) +#define MT2712_PIN_38_MSDC0E_DAT7__FUNC_DBG_MON_A_14_ (MTK_PIN_NO(38) | 7) + +#define MT2712_PIN_39_MSDC0E_DAT6__FUNC_GPIO39 (MTK_PIN_NO(39) | 0) +#define MT2712_PIN_39_MSDC0E_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(39) | 1) +#define MT2712_PIN_39_MSDC0E_DAT6__FUNC_NAND_ND6 (MTK_PIN_NO(39) | 2) +#define MT2712_PIN_39_MSDC0E_DAT6__FUNC_DBG_MON_A_15_ (MTK_PIN_NO(39) | 7) + +#define MT2712_PIN_40_MSDC0E_DAT5__FUNC_GPIO40 (MTK_PIN_NO(40) | 0) +#define MT2712_PIN_40_MSDC0E_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(40) | 1) +#define MT2712_PIN_40_MSDC0E_DAT5__FUNC_NAND_ND5 (MTK_PIN_NO(40) | 2) +#define MT2712_PIN_40_MSDC0E_DAT5__FUNC_DBG_MON_A_16_ (MTK_PIN_NO(40) | 7) + +#define MT2712_PIN_41_MSDC0E_DAT4__FUNC_GPIO41 (MTK_PIN_NO(41) | 0) +#define MT2712_PIN_41_MSDC0E_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(41) | 1) +#define MT2712_PIN_41_MSDC0E_DAT4__FUNC_NAND_ND4 (MTK_PIN_NO(41) | 2) +#define MT2712_PIN_41_MSDC0E_DAT4__FUNC_DBG_MON_A_17_ (MTK_PIN_NO(41) | 7) + +#define MT2712_PIN_42_MSDC0E_DAT3__FUNC_GPIO42 (MTK_PIN_NO(42) | 0) +#define MT2712_PIN_42_MSDC0E_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(42) | 1) +#define MT2712_PIN_42_MSDC0E_DAT3__FUNC_NAND_ND3 (MTK_PIN_NO(42) | 2) +#define MT2712_PIN_42_MSDC0E_DAT3__FUNC_DBG_MON_A_18_ (MTK_PIN_NO(42) | 7) + +#define MT2712_PIN_43_MSDC0E_DAT2__FUNC_GPIO43 (MTK_PIN_NO(43) | 0) +#define MT2712_PIN_43_MSDC0E_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(43) | 1) +#define MT2712_PIN_43_MSDC0E_DAT2__FUNC_NAND_ND2 (MTK_PIN_NO(43) | 2) +#define MT2712_PIN_43_MSDC0E_DAT2__FUNC_DBG_MON_A_19_ (MTK_PIN_NO(43) | 7) + +#define MT2712_PIN_44_MSDC0E_DAT1__FUNC_GPIO44 (MTK_PIN_NO(44) | 0) +#define MT2712_PIN_44_MSDC0E_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(44) | 1) +#define MT2712_PIN_44_MSDC0E_DAT1__FUNC_NAND_ND1 (MTK_PIN_NO(44) | 2) +#define MT2712_PIN_44_MSDC0E_DAT1__FUNC_DBG_MON_A_20_ (MTK_PIN_NO(44) | 7) + +#define MT2712_PIN_45_MSDC0E_DAT0__FUNC_GPIO45 (MTK_PIN_NO(45) | 0) +#define MT2712_PIN_45_MSDC0E_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(45) | 1) +#define MT2712_PIN_45_MSDC0E_DAT0__FUNC_NAND_ND0 (MTK_PIN_NO(45) | 2) +#define MT2712_PIN_45_MSDC0E_DAT0__FUNC_DBG_MON_A_21_ (MTK_PIN_NO(45) | 7) + +#define MT2712_PIN_46_MSDC0E_CMD__FUNC_GPIO46 (MTK_PIN_NO(46) | 0) +#define MT2712_PIN_46_MSDC0E_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(46) | 1) +#define MT2712_PIN_46_MSDC0E_CMD__FUNC_NAND_NRNB (MTK_PIN_NO(46) | 2) +#define MT2712_PIN_46_MSDC0E_CMD__FUNC_DBG_MON_A_22_ (MTK_PIN_NO(46) | 7) + +#define MT2712_PIN_47_MSDC0E_DSL__FUNC_GPIO47 (MTK_PIN_NO(47) | 0) +#define MT2712_PIN_47_MSDC0E_DSL__FUNC_MSDC0_DSL (MTK_PIN_NO(47) | 1) +#define MT2712_PIN_47_MSDC0E_DSL__FUNC_DBG_MON_A_23_ (MTK_PIN_NO(47) | 7) + +#define MT2712_PIN_48_MSDC0E_RSTB__FUNC_GPIO48 (MTK_PIN_NO(48) | 0) +#define MT2712_PIN_48_MSDC0E_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(48) | 1) +#define MT2712_PIN_48_MSDC0E_RSTB__FUNC_DBG_MON_A_24_ (MTK_PIN_NO(48) | 7) + +#define MT2712_PIN_49_MSDC3_DAT3__FUNC_GPIO49 (MTK_PIN_NO(49) | 0) +#define MT2712_PIN_49_MSDC3_DAT3__FUNC_MSDC3_DAT3 (MTK_PIN_NO(49) | 1) +#define MT2712_PIN_49_MSDC3_DAT3__FUNC_DBG_MON_A_25_ (MTK_PIN_NO(49) | 7) + +#define MT2712_PIN_50_MSDC3_DAT2__FUNC_GPIO50 (MTK_PIN_NO(50) | 0) +#define MT2712_PIN_50_MSDC3_DAT2__FUNC_MSDC3_DAT2 (MTK_PIN_NO(50) | 1) +#define MT2712_PIN_50_MSDC3_DAT2__FUNC_DBG_MON_A_26_ (MTK_PIN_NO(50) | 7) + +#define MT2712_PIN_51_MSDC3_DAT1__FUNC_GPIO51 (MTK_PIN_NO(51) | 0) +#define MT2712_PIN_51_MSDC3_DAT1__FUNC_MSDC3_DAT1 (MTK_PIN_NO(51) | 1) +#define MT2712_PIN_51_MSDC3_DAT1__FUNC_DBG_MON_A_27_ (MTK_PIN_NO(51) | 7) + +#define MT2712_PIN_52_MSDC3_DAT0__FUNC_GPIO52 (MTK_PIN_NO(52) | 0) +#define MT2712_PIN_52_MSDC3_DAT0__FUNC_MSDC3_DAT0 (MTK_PIN_NO(52) | 1) +#define MT2712_PIN_52_MSDC3_DAT0__FUNC_DBG_MON_A_28_ (MTK_PIN_NO(52) | 7) + +#define MT2712_PIN_53_MSDC3_CMD__FUNC_GPIO53 (MTK_PIN_NO(53) | 0) +#define MT2712_PIN_53_MSDC3_CMD__FUNC_MSDC3_CMD (MTK_PIN_NO(53) | 1) +#define MT2712_PIN_53_MSDC3_CMD__FUNC_DBG_MON_A_29_ (MTK_PIN_NO(53) | 7) + +#define MT2712_PIN_54_MSDC3_INS__FUNC_GPIO54 (MTK_PIN_NO(54) | 0) +#define MT2712_PIN_54_MSDC3_INS__FUNC_MSDC3_INS (MTK_PIN_NO(54) | 1) +#define MT2712_PIN_54_MSDC3_INS__FUNC_DBG_MON_A_30_ (MTK_PIN_NO(54) | 7) + +#define MT2712_PIN_55_MSDC3_DSL__FUNC_GPIO55 (MTK_PIN_NO(55) | 0) +#define MT2712_PIN_55_MSDC3_DSL__FUNC_MSDC3_DSL (MTK_PIN_NO(55) | 1) +#define MT2712_PIN_55_MSDC3_DSL__FUNC_DBG_MON_A_31_ (MTK_PIN_NO(55) | 7) + +#define MT2712_PIN_56_MSDC3_CLK__FUNC_GPIO56 (MTK_PIN_NO(56) | 0) +#define MT2712_PIN_56_MSDC3_CLK__FUNC_MSDC3_CLK (MTK_PIN_NO(56) | 1) +#define MT2712_PIN_56_MSDC3_CLK__FUNC_DBG_MON_A_32_ (MTK_PIN_NO(56) | 7) + +#define MT2712_PIN_57_NOR_CS__FUNC_GPIO57 (MTK_PIN_NO(57) | 0) +#define MT2712_PIN_57_NOR_CS__FUNC_NOR_CS (MTK_PIN_NO(57) | 1) + +#define MT2712_PIN_58_NOR_CK__FUNC_GPIO58 (MTK_PIN_NO(58) | 0) +#define MT2712_PIN_58_NOR_CK__FUNC_NOR_CK (MTK_PIN_NO(58) | 1) + +#define MT2712_PIN_59_NOR_IO0__FUNC_GPIO59 (MTK_PIN_NO(59) | 0) +#define MT2712_PIN_59_NOR_IO0__FUNC_NOR_IO0 (MTK_PIN_NO(59) | 1) + +#define MT2712_PIN_60_NOR_IO1__FUNC_GPIO60 (MTK_PIN_NO(60) | 0) +#define MT2712_PIN_60_NOR_IO1__FUNC_NOR_IO1 (MTK_PIN_NO(60) | 1) + +#define MT2712_PIN_61_NOR_IO2__FUNC_GPIO61 (MTK_PIN_NO(61) | 0) +#define MT2712_PIN_61_NOR_IO2__FUNC_NOR_IO2 (MTK_PIN_NO(61) | 1) + +#define MT2712_PIN_62_NOR_IO3__FUNC_GPIO62 (MTK_PIN_NO(62) | 0) +#define MT2712_PIN_62_NOR_IO3__FUNC_NOR_IO3 (MTK_PIN_NO(62) | 1) + +#define MT2712_PIN_63_MSDC1_CLK__FUNC_GPIO63 (MTK_PIN_NO(63) | 0) +#define MT2712_PIN_63_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(63) | 1) +#define MT2712_PIN_63_MSDC1_CLK__FUNC_UDI_TCK (MTK_PIN_NO(63) | 2) + +#define MT2712_PIN_64_MSDC1_DAT3__FUNC_GPIO64 (MTK_PIN_NO(64) | 0) +#define MT2712_PIN_64_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(64) | 1) +#define MT2712_PIN_64_MSDC1_DAT3__FUNC_UDI_TDI (MTK_PIN_NO(64) | 2) + +#define MT2712_PIN_65_MSDC1_DAT1__FUNC_GPIO65 (MTK_PIN_NO(65) | 0) +#define MT2712_PIN_65_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(65) | 1) +#define MT2712_PIN_65_MSDC1_DAT1__FUNC_UDI_TMS (MTK_PIN_NO(65) | 2) + +#define MT2712_PIN_66_MSDC1_DAT2__FUNC_GPIO66 (MTK_PIN_NO(66) | 0) +#define MT2712_PIN_66_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(66) | 1) +#define MT2712_PIN_66_MSDC1_DAT2__FUNC_UDI_TDO (MTK_PIN_NO(66) | 2) + +#define MT2712_PIN_67_MSDC1_PSW__FUNC_GPIO67 (MTK_PIN_NO(67) | 0) +#define MT2712_PIN_67_MSDC1_PSW__FUNC_UDI_NTRST (MTK_PIN_NO(67) | 2) + +#define MT2712_PIN_68_MSDC1_DAT0__FUNC_GPIO68 (MTK_PIN_NO(68) | 0) +#define MT2712_PIN_68_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(68) | 1) + +#define MT2712_PIN_69_MSDC1_CMD__FUNC_GPIO69 (MTK_PIN_NO(69) | 0) +#define MT2712_PIN_69_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(69) | 1) + +#define MT2712_PIN_70_MSDC1_INS__FUNC_GPIO70 (MTK_PIN_NO(70) | 0) + +#define MT2712_PIN_71_GBE_TXD3__FUNC_GPIO71 (MTK_PIN_NO(71) | 0) +#define MT2712_PIN_71_GBE_TXD3__FUNC_GBE_TXD3 (MTK_PIN_NO(71) | 1) +#define MT2712_PIN_71_GBE_TXD3__FUNC_DBG_MON_B_0_ (MTK_PIN_NO(71) | 7) + +#define MT2712_PIN_72_GBE_TXD2__FUNC_GPIO72 (MTK_PIN_NO(72) | 0) +#define MT2712_PIN_72_GBE_TXD2__FUNC_GBE_TXD2 (MTK_PIN_NO(72) | 1) +#define MT2712_PIN_72_GBE_TXD2__FUNC_DBG_MON_B_1_ (MTK_PIN_NO(72) | 7) + +#define MT2712_PIN_73_GBE_TXD1__FUNC_GPIO73 (MTK_PIN_NO(73) | 0) +#define MT2712_PIN_73_GBE_TXD1__FUNC_GBE_TXD1 (MTK_PIN_NO(73) | 1) +#define MT2712_PIN_73_GBE_TXD1__FUNC_DBG_MON_B_2_ (MTK_PIN_NO(73) | 7) + +#define MT2712_PIN_74_GBE_TXD0__FUNC_GPIO74 (MTK_PIN_NO(74) | 0) +#define MT2712_PIN_74_GBE_TXD0__FUNC_GBE_TXD0 (MTK_PIN_NO(74) | 1) +#define MT2712_PIN_74_GBE_TXD0__FUNC_DBG_MON_B_3_ (MTK_PIN_NO(74) | 7) + +#define MT2712_PIN_75_GBE_TXC__FUNC_GPIO75 (MTK_PIN_NO(75) | 0) +#define MT2712_PIN_75_GBE_TXC__FUNC_GBE_TXC (MTK_PIN_NO(75) | 1) +#define MT2712_PIN_75_GBE_TXC__FUNC_DBG_MON_B_4_ (MTK_PIN_NO(75) | 7) + +#define MT2712_PIN_76_GBE_TXEN__FUNC_GPIO76 (MTK_PIN_NO(76) | 0) +#define MT2712_PIN_76_GBE_TXEN__FUNC_GBE_TXEN (MTK_PIN_NO(76) | 1) +#define MT2712_PIN_76_GBE_TXEN__FUNC_DBG_MON_B_5_ (MTK_PIN_NO(76) | 7) + +#define MT2712_PIN_77_GBE_TXER__FUNC_GPIO77 (MTK_PIN_NO(77) | 0) +#define MT2712_PIN_77_GBE_TXER__FUNC_GBE_TXER (MTK_PIN_NO(77) | 1) +#define MT2712_PIN_77_GBE_TXER__FUNC_DBG_MON_B_6_ (MTK_PIN_NO(77) | 7) + +#define MT2712_PIN_78_GBE_RXD3__FUNC_GPIO78 (MTK_PIN_NO(78) | 0) +#define MT2712_PIN_78_GBE_RXD3__FUNC_GBE_RXD3 (MTK_PIN_NO(78) | 1) +#define MT2712_PIN_78_GBE_RXD3__FUNC_DBG_MON_B_7_ (MTK_PIN_NO(78) | 7) + +#define MT2712_PIN_79_GBE_RXD2__FUNC_GPIO79 (MTK_PIN_NO(79) | 0) +#define MT2712_PIN_79_GBE_RXD2__FUNC_GBE_RXD2 (MTK_PIN_NO(79) | 1) +#define MT2712_PIN_79_GBE_RXD2__FUNC_DBG_MON_B_8_ (MTK_PIN_NO(79) | 7) + +#define MT2712_PIN_80_GBE_RXD1__FUNC_GPIO80 (MTK_PIN_NO(80) | 0) +#define MT2712_PIN_80_GBE_RXD1__FUNC_GBE_RXD1 (MTK_PIN_NO(80) | 1) +#define MT2712_PIN_80_GBE_RXD1__FUNC_DBG_MON_B_9_ (MTK_PIN_NO(80) | 7) + +#define MT2712_PIN_81_GBE_RXD0__FUNC_GPIO81 (MTK_PIN_NO(81) | 0) +#define MT2712_PIN_81_GBE_RXD0__FUNC_GBE_RXD0 (MTK_PIN_NO(81) | 1) +#define MT2712_PIN_81_GBE_RXD0__FUNC_DBG_MON_B_10_ (MTK_PIN_NO(81) | 7) + +#define MT2712_PIN_82_GBE_RXDV__FUNC_GPIO82 (MTK_PIN_NO(82) | 0) +#define MT2712_PIN_82_GBE_RXDV__FUNC_GBE_RXDV (MTK_PIN_NO(82) | 1) +#define MT2712_PIN_82_GBE_RXDV__FUNC_DBG_MON_B_11_ (MTK_PIN_NO(82) | 7) + +#define MT2712_PIN_83_GBE_RXER__FUNC_GPIO83 (MTK_PIN_NO(83) | 0) +#define MT2712_PIN_83_GBE_RXER__FUNC_GBE_RXER (MTK_PIN_NO(83) | 1) +#define MT2712_PIN_83_GBE_RXER__FUNC_DBG_MON_B_12_ (MTK_PIN_NO(83) | 7) + +#define MT2712_PIN_84_GBE_RXC__FUNC_GPIO84 (MTK_PIN_NO(84) | 0) +#define MT2712_PIN_84_GBE_RXC__FUNC_GBE_RXC (MTK_PIN_NO(84) | 1) +#define MT2712_PIN_84_GBE_RXC__FUNC_DBG_MON_B_13_ (MTK_PIN_NO(84) | 7) + +#define MT2712_PIN_85_GBE_MDC__FUNC_GPIO85 (MTK_PIN_NO(85) | 0) +#define MT2712_PIN_85_GBE_MDC__FUNC_GBE_MDC (MTK_PIN_NO(85) | 1) +#define MT2712_PIN_85_GBE_MDC__FUNC_DBG_MON_B_14_ (MTK_PIN_NO(85) | 7) + +#define MT2712_PIN_86_GBE_MDIO__FUNC_GPIO86 (MTK_PIN_NO(86) | 0) +#define MT2712_PIN_86_GBE_MDIO__FUNC_GBE_MDIO (MTK_PIN_NO(86) | 1) +#define MT2712_PIN_86_GBE_MDIO__FUNC_DBG_MON_B_15_ (MTK_PIN_NO(86) | 7) + +#define MT2712_PIN_87_GBE_COL__FUNC_GPIO87 (MTK_PIN_NO(87) | 0) +#define MT2712_PIN_87_GBE_COL__FUNC_GBE_COL (MTK_PIN_NO(87) | 1) +#define MT2712_PIN_87_GBE_COL__FUNC_DBG_MON_B_16_ (MTK_PIN_NO(87) | 7) + +#define MT2712_PIN_88_GBE_INTR__FUNC_GPIO88 (MTK_PIN_NO(88) | 0) +#define MT2712_PIN_88_GBE_INTR__FUNC_GBE_INTR (MTK_PIN_NO(88) | 1) +#define MT2712_PIN_88_GBE_INTR__FUNC_GBE_CRS (MTK_PIN_NO(88) | 2) +#define MT2712_PIN_88_GBE_INTR__FUNC_DBG_MON_B_17_ (MTK_PIN_NO(88) | 7) + +#define MT2712_PIN_89_MSDC2_CLK__FUNC_GPIO89 (MTK_PIN_NO(89) | 0) +#define MT2712_PIN_89_MSDC2_CLK__FUNC_MSDC2_CLK (MTK_PIN_NO(89) | 1) +#define MT2712_PIN_89_MSDC2_CLK__FUNC_DBG_MON_B_18_ (MTK_PIN_NO(89) | 7) + +#define MT2712_PIN_90_MSDC2_DAT3__FUNC_GPIO90 (MTK_PIN_NO(90) | 0) +#define MT2712_PIN_90_MSDC2_DAT3__FUNC_MSDC2_DAT3 (MTK_PIN_NO(90) | 1) +#define MT2712_PIN_90_MSDC2_DAT3__FUNC_DBG_MON_B_19_ (MTK_PIN_NO(90) | 7) + +#define MT2712_PIN_91_MSDC2_DAT2__FUNC_GPIO91 (MTK_PIN_NO(91) | 0) +#define MT2712_PIN_91_MSDC2_DAT2__FUNC_MSDC2_DAT2 (MTK_PIN_NO(91) | 1) +#define MT2712_PIN_91_MSDC2_DAT2__FUNC_DBG_MON_B_20_ (MTK_PIN_NO(91) | 7) + +#define MT2712_PIN_92_MSDC2_DAT1__FUNC_GPIO92 (MTK_PIN_NO(92) | 0) +#define MT2712_PIN_92_MSDC2_DAT1__FUNC_MSDC2_DAT1 (MTK_PIN_NO(92) | 1) +#define MT2712_PIN_92_MSDC2_DAT1__FUNC_DBG_MON_B_21_ (MTK_PIN_NO(92) | 7) + +#define MT2712_PIN_93_MSDC2_DAT0__FUNC_GPIO93 (MTK_PIN_NO(93) | 0) +#define MT2712_PIN_93_MSDC2_DAT0__FUNC_MSDC2_DAT0 (MTK_PIN_NO(93) | 1) +#define MT2712_PIN_93_MSDC2_DAT0__FUNC_DBG_MON_B_22_ (MTK_PIN_NO(93) | 7) + +#define MT2712_PIN_94_MSDC2_INS__FUNC_GPIO94 (MTK_PIN_NO(94) | 0) +#define MT2712_PIN_94_MSDC2_INS__FUNC_DBG_MON_B_23_ (MTK_PIN_NO(94) | 7) + +#define MT2712_PIN_95_MSDC2_CMD__FUNC_GPIO95 (MTK_PIN_NO(95) | 0) +#define MT2712_PIN_95_MSDC2_CMD__FUNC_MSDC2_CMD (MTK_PIN_NO(95) | 1) +#define MT2712_PIN_95_MSDC2_CMD__FUNC_DBG_MON_B_24_ (MTK_PIN_NO(95) | 7) + +#define MT2712_PIN_96_MSDC2_PSW__FUNC_GPIO96 (MTK_PIN_NO(96) | 0) +#define MT2712_PIN_96_MSDC2_PSW__FUNC_DBG_MON_B_25_ (MTK_PIN_NO(96) | 7) + +#define MT2712_PIN_97_URXD4__FUNC_GPIO97 (MTK_PIN_NO(97) | 0) +#define MT2712_PIN_97_URXD4__FUNC_URXD4 (MTK_PIN_NO(97) | 1) +#define MT2712_PIN_97_URXD4__FUNC_UTXD4 (MTK_PIN_NO(97) | 2) +#define MT2712_PIN_97_URXD4__FUNC_MRG_CLK (MTK_PIN_NO(97) | 3) +#define MT2712_PIN_97_URXD4__FUNC_PCM1_CLK (MTK_PIN_NO(97) | 4) +#define MT2712_PIN_97_URXD4__FUNC_I2S_IQ2_SDQB (MTK_PIN_NO(97) | 5) +#define MT2712_PIN_97_URXD4__FUNC_I2SO1_WS (MTK_PIN_NO(97) | 6) +#define MT2712_PIN_97_URXD4__FUNC_DBG_MON_B_26_ (MTK_PIN_NO(97) | 7) + +#define MT2712_PIN_98_URTS4__FUNC_GPIO98 (MTK_PIN_NO(98) | 0) +#define MT2712_PIN_98_URTS4__FUNC_URTS4 (MTK_PIN_NO(98) | 1) +#define MT2712_PIN_98_URTS4__FUNC_UCTS4 (MTK_PIN_NO(98) | 2) +#define MT2712_PIN_98_URTS4__FUNC_MRG_RX (MTK_PIN_NO(98) | 3) +#define MT2712_PIN_98_URTS4__FUNC_PCM1_DI (MTK_PIN_NO(98) | 4) +#define MT2712_PIN_98_URTS4__FUNC_I2S_IQ1_SDIB (MTK_PIN_NO(98) | 5) +#define MT2712_PIN_98_URTS4__FUNC_I2SO1_MCK (MTK_PIN_NO(98) | 6) +#define MT2712_PIN_98_URTS4__FUNC_DBG_MON_B_27_ (MTK_PIN_NO(98) | 7) + +#define MT2712_PIN_99_UTXD4__FUNC_GPIO99 (MTK_PIN_NO(99) | 0) +#define MT2712_PIN_99_UTXD4__FUNC_UTXD4 (MTK_PIN_NO(99) | 1) +#define MT2712_PIN_99_UTXD4__FUNC_URXD4 (MTK_PIN_NO(99) | 2) +#define MT2712_PIN_99_UTXD4__FUNC_MRG_SYNC (MTK_PIN_NO(99) | 3) +#define MT2712_PIN_99_UTXD4__FUNC_PCM1_SYNC (MTK_PIN_NO(99) | 4) +#define MT2712_PIN_99_UTXD4__FUNC_I2S_IQ0_SDQB (MTK_PIN_NO(99) | 5) +#define MT2712_PIN_99_UTXD4__FUNC_I2SO1_BCK (MTK_PIN_NO(99) | 6) +#define MT2712_PIN_99_UTXD4__FUNC_DBG_MON_B_28_ (MTK_PIN_NO(99) | 7) + +#define MT2712_PIN_100_UCTS4__FUNC_GPIO100 (MTK_PIN_NO(100) | 0) +#define MT2712_PIN_100_UCTS4__FUNC_UCTS4 (MTK_PIN_NO(100) | 1) +#define MT2712_PIN_100_UCTS4__FUNC_URTS4 (MTK_PIN_NO(100) | 2) +#define MT2712_PIN_100_UCTS4__FUNC_MRG_TX (MTK_PIN_NO(100) | 3) +#define MT2712_PIN_100_UCTS4__FUNC_PCM1_DO (MTK_PIN_NO(100) | 4) +#define MT2712_PIN_100_UCTS4__FUNC_I2S_IQ0_SDIB (MTK_PIN_NO(100) | 5) +#define MT2712_PIN_100_UCTS4__FUNC_I2SO1_DO (MTK_PIN_NO(100) | 6) +#define MT2712_PIN_100_UCTS4__FUNC_DBG_MON_B_29_ (MTK_PIN_NO(100) | 7) + +#define MT2712_PIN_101_URXD5__FUNC_GPIO101 (MTK_PIN_NO(101) | 0) +#define MT2712_PIN_101_URXD5__FUNC_URXD5 (MTK_PIN_NO(101) | 1) +#define MT2712_PIN_101_URXD5__FUNC_UTXD5 (MTK_PIN_NO(101) | 2) +#define MT2712_PIN_101_URXD5__FUNC_I2SO3_WS (MTK_PIN_NO(101) | 3) +#define MT2712_PIN_101_URXD5__FUNC_TDMIN_LRCK (MTK_PIN_NO(101) | 4) +#define MT2712_PIN_101_URXD5__FUNC_I2SO0_WS (MTK_PIN_NO(101) | 6) +#define MT2712_PIN_101_URXD5__FUNC_DBG_MON_B_30_ (MTK_PIN_NO(101) | 7) + +#define MT2712_PIN_102_URTS5__FUNC_GPIO102 (MTK_PIN_NO(102) | 0) +#define MT2712_PIN_102_URTS5__FUNC_URTS5 (MTK_PIN_NO(102) | 1) +#define MT2712_PIN_102_URTS5__FUNC_UCTS5 (MTK_PIN_NO(102) | 2) +#define MT2712_PIN_102_URTS5__FUNC_I2SO3_MCK (MTK_PIN_NO(102) | 3) +#define MT2712_PIN_102_URTS5__FUNC_TDMIN_MCLK (MTK_PIN_NO(102) | 4) +#define MT2712_PIN_102_URTS5__FUNC_IR_IN (MTK_PIN_NO(102) | 5) +#define MT2712_PIN_102_URTS5__FUNC_I2SO0_MCK (MTK_PIN_NO(102) | 6) +#define MT2712_PIN_102_URTS5__FUNC_DBG_MON_B_31_ (MTK_PIN_NO(102) | 7) + +#define MT2712_PIN_103_UTXD5__FUNC_GPIO103 (MTK_PIN_NO(103) | 0) +#define MT2712_PIN_103_UTXD5__FUNC_UTXD5 (MTK_PIN_NO(103) | 1) +#define MT2712_PIN_103_UTXD5__FUNC_URXD5 (MTK_PIN_NO(103) | 2) +#define MT2712_PIN_103_UTXD5__FUNC_I2SO3_BCK (MTK_PIN_NO(103) | 3) +#define MT2712_PIN_103_UTXD5__FUNC_TDMIN_BCK (MTK_PIN_NO(103) | 4) +#define MT2712_PIN_103_UTXD5__FUNC_I2SO0_BCK (MTK_PIN_NO(103) | 6) +#define MT2712_PIN_103_UTXD5__FUNC_DBG_MON_B_32_ (MTK_PIN_NO(103) | 7) + +#define MT2712_PIN_104_UCTS5__FUNC_GPIO104 (MTK_PIN_NO(104) | 0) +#define MT2712_PIN_104_UCTS5__FUNC_UCTS5 (MTK_PIN_NO(104) | 1) +#define MT2712_PIN_104_UCTS5__FUNC_URTS5 (MTK_PIN_NO(104) | 2) +#define MT2712_PIN_104_UCTS5__FUNC_I2SO0_DO1 (MTK_PIN_NO(104) | 3) +#define MT2712_PIN_104_UCTS5__FUNC_TDMIN_DI (MTK_PIN_NO(104) | 4) +#define MT2712_PIN_104_UCTS5__FUNC_IR_IN (MTK_PIN_NO(104) | 5) +#define MT2712_PIN_104_UCTS5__FUNC_I2SO0_DO0 (MTK_PIN_NO(104) | 6) + +#define MT2712_PIN_105_I2C_SDA0__FUNC_GPIO105 (MTK_PIN_NO(105) | 0) +#define MT2712_PIN_105_I2C_SDA0__FUNC_SDA0 (MTK_PIN_NO(105) | 1) + +#define MT2712_PIN_106_I2C_SDA1__FUNC_GPIO106 (MTK_PIN_NO(106) | 0) +#define MT2712_PIN_106_I2C_SDA1__FUNC_SDA1 (MTK_PIN_NO(106) | 1) + +#define MT2712_PIN_107_I2C_SDA2__FUNC_GPIO107 (MTK_PIN_NO(107) | 0) +#define MT2712_PIN_107_I2C_SDA2__FUNC_SDA2 (MTK_PIN_NO(107) | 1) + +#define MT2712_PIN_108_I2C_SDA3__FUNC_GPIO108 (MTK_PIN_NO(108) | 0) +#define MT2712_PIN_108_I2C_SDA3__FUNC_SDA3 (MTK_PIN_NO(108) | 1) + +#define MT2712_PIN_109_I2C_SDA4__FUNC_GPIO109 (MTK_PIN_NO(109) | 0) +#define MT2712_PIN_109_I2C_SDA4__FUNC_SDA4 (MTK_PIN_NO(109) | 1) + +#define MT2712_PIN_110_I2C_SDA5__FUNC_GPIO110 (MTK_PIN_NO(110) | 0) +#define MT2712_PIN_110_I2C_SDA5__FUNC_SDA5 (MTK_PIN_NO(110) | 1) + +#define MT2712_PIN_111_I2C_SCL0__FUNC_GPIO111 (MTK_PIN_NO(111) | 0) +#define MT2712_PIN_111_I2C_SCL0__FUNC_SCL0 (MTK_PIN_NO(111) | 1) + +#define MT2712_PIN_112_I2C_SCL1__FUNC_GPIO112 (MTK_PIN_NO(112) | 0) +#define MT2712_PIN_112_I2C_SCL1__FUNC_SCL1 (MTK_PIN_NO(112) | 1) + +#define MT2712_PIN_113_I2C_SCL2__FUNC_GPIO113 (MTK_PIN_NO(113) | 0) +#define MT2712_PIN_113_I2C_SCL2__FUNC_SCL2 (MTK_PIN_NO(113) | 1) + +#define MT2712_PIN_114_I2C_SCL3__FUNC_GPIO114 (MTK_PIN_NO(114) | 0) +#define MT2712_PIN_114_I2C_SCL3__FUNC_SCL3 (MTK_PIN_NO(114) | 1) + +#define MT2712_PIN_115_I2C_SCL4__FUNC_GPIO115 (MTK_PIN_NO(115) | 0) +#define MT2712_PIN_115_I2C_SCL4__FUNC_SCL4 (MTK_PIN_NO(115) | 1) + +#define MT2712_PIN_116_I2C_SCL5__FUNC_GPIO116 (MTK_PIN_NO(116) | 0) +#define MT2712_PIN_116_I2C_SCL5__FUNC_SCL5 (MTK_PIN_NO(116) | 1) + +#define MT2712_PIN_117_URXD0__FUNC_GPIO117 (MTK_PIN_NO(117) | 0) +#define MT2712_PIN_117_URXD0__FUNC_URXD0 (MTK_PIN_NO(117) | 1) +#define MT2712_PIN_117_URXD0__FUNC_UTXD0 (MTK_PIN_NO(117) | 2) + +#define MT2712_PIN_118_URXD1__FUNC_GPIO118 (MTK_PIN_NO(118) | 0) +#define MT2712_PIN_118_URXD1__FUNC_URXD1 (MTK_PIN_NO(118) | 1) +#define MT2712_PIN_118_URXD1__FUNC_UTXD1 (MTK_PIN_NO(118) | 2) + +#define MT2712_PIN_119_URXD2__FUNC_GPIO119 (MTK_PIN_NO(119) | 0) +#define MT2712_PIN_119_URXD2__FUNC_URXD2 (MTK_PIN_NO(119) | 1) +#define MT2712_PIN_119_URXD2__FUNC_UTXD2 (MTK_PIN_NO(119) | 2) + +#define MT2712_PIN_120_UTXD0__FUNC_GPIO120 (MTK_PIN_NO(120) | 0) +#define MT2712_PIN_120_UTXD0__FUNC_UTXD0 (MTK_PIN_NO(120) | 1) +#define MT2712_PIN_120_UTXD0__FUNC_URXD0 (MTK_PIN_NO(120) | 2) + +#define MT2712_PIN_121_UTXD1__FUNC_GPIO121 (MTK_PIN_NO(121) | 0) +#define MT2712_PIN_121_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(121) | 1) +#define MT2712_PIN_121_UTXD1__FUNC_URXD1 (MTK_PIN_NO(121) | 2) + +#define MT2712_PIN_122_UTXD2__FUNC_GPIO122 (MTK_PIN_NO(122) | 0) +#define MT2712_PIN_122_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(122) | 1) +#define MT2712_PIN_122_UTXD2__FUNC_URXD2 (MTK_PIN_NO(122) | 2) + +#define MT2712_PIN_123_URXD3__FUNC_GPIO123 (MTK_PIN_NO(123) | 0) +#define MT2712_PIN_123_URXD3__FUNC_URXD3 (MTK_PIN_NO(123) | 1) +#define MT2712_PIN_123_URXD3__FUNC_UTXD3 (MTK_PIN_NO(123) | 2) +#define MT2712_PIN_123_URXD3__FUNC_PURE_HW_PROTECT (MTK_PIN_NO(123) | 3) + +#define MT2712_PIN_124_UTXD3__FUNC_GPIO124 (MTK_PIN_NO(124) | 0) +#define MT2712_PIN_124_UTXD3__FUNC_UTXD3 (MTK_PIN_NO(124) | 1) +#define MT2712_PIN_124_UTXD3__FUNC_URXD3 (MTK_PIN_NO(124) | 2) +#define MT2712_PIN_124_UTXD3__FUNC_PURE_HW_PROTECT (MTK_PIN_NO(124) | 3) + +#define MT2712_PIN_125_URTS3__FUNC_GPIO125 (MTK_PIN_NO(125) | 0) +#define MT2712_PIN_125_URTS3__FUNC_URTS3 (MTK_PIN_NO(125) | 1) +#define MT2712_PIN_125_URTS3__FUNC_UCTS3 (MTK_PIN_NO(125) | 2) +#define MT2712_PIN_125_URTS3__FUNC_WATCH_DOG (MTK_PIN_NO(125) | 3) + +#define MT2712_PIN_126_UCTS3__FUNC_GPIO126 (MTK_PIN_NO(126) | 0) +#define MT2712_PIN_126_UCTS3__FUNC_UCTS3 (MTK_PIN_NO(126) | 1) +#define MT2712_PIN_126_UCTS3__FUNC_URTS3 (MTK_PIN_NO(126) | 2) +#define MT2712_PIN_126_UCTS3__FUNC_SRCLKENA0 (MTK_PIN_NO(126) | 3) + +#define MT2712_PIN_127_SPI2_CSN__FUNC_GPIO127 (MTK_PIN_NO(127) | 0) +#define MT2712_PIN_127_SPI2_CSN__FUNC_SPI_CS_2_ (MTK_PIN_NO(127) | 1) +#define MT2712_PIN_127_SPI2_CSN__FUNC_SPI_CS_1_ (MTK_PIN_NO(127) | 2) + +#define MT2712_PIN_128_SPI2_MO__FUNC_GPIO128 (MTK_PIN_NO(128) | 0) +#define MT2712_PIN_128_SPI2_MO__FUNC_SPI_MO_2_ (MTK_PIN_NO(128) | 1) +#define MT2712_PIN_128_SPI2_MO__FUNC_SPI_SO_1_ (MTK_PIN_NO(128) | 2) + +#define MT2712_PIN_129_SPI2_MI__FUNC_GPIO129 (MTK_PIN_NO(129) | 0) +#define MT2712_PIN_129_SPI2_MI__FUNC_SPI_MI_2_ (MTK_PIN_NO(129) | 1) +#define MT2712_PIN_129_SPI2_MI__FUNC_SPI_SI_1_ (MTK_PIN_NO(129) | 2) + +#define MT2712_PIN_130_SPI2_CK__FUNC_GPIO130 (MTK_PIN_NO(130) | 0) +#define MT2712_PIN_130_SPI2_CK__FUNC_SPI_CK_2_ (MTK_PIN_NO(130) | 1) +#define MT2712_PIN_130_SPI2_CK__FUNC_SPI_CK_1_ (MTK_PIN_NO(130) | 2) + +#define MT2712_PIN_131_SPI3_CSN__FUNC_GPIO131 (MTK_PIN_NO(131) | 0) +#define MT2712_PIN_131_SPI3_CSN__FUNC_SPI_CS_3_ (MTK_PIN_NO(131) | 1) + +#define MT2712_PIN_132_SPI3_MO__FUNC_GPIO132 (MTK_PIN_NO(132) | 0) +#define MT2712_PIN_132_SPI3_MO__FUNC_SPI_MO_3_ (MTK_PIN_NO(132) | 1) + +#define MT2712_PIN_133_SPI3_MI__FUNC_GPIO133 (MTK_PIN_NO(133) | 0) +#define MT2712_PIN_133_SPI3_MI__FUNC_SPI_MI_3_ (MTK_PIN_NO(133) | 1) + +#define MT2712_PIN_134_SPI3_CK__FUNC_GPIO134 (MTK_PIN_NO(134) | 0) +#define MT2712_PIN_134_SPI3_CK__FUNC_SPI_CK_3_ (MTK_PIN_NO(134) | 1) + +#define MT2712_PIN_135_KPROW3__FUNC_GPIO135 (MTK_PIN_NO(135) | 0) +#define MT2712_PIN_135_KPROW3__FUNC_KROW3 (MTK_PIN_NO(135) | 1) +#define MT2712_PIN_135_KPROW3__FUNC_DSIC_TE (MTK_PIN_NO(135) | 2) + +#define MT2712_PIN_136_KPROW4__FUNC_GPIO136 (MTK_PIN_NO(136) | 0) +#define MT2712_PIN_136_KPROW4__FUNC_KROW4 (MTK_PIN_NO(136) | 1) +#define MT2712_PIN_136_KPROW4__FUNC_DSID_TE (MTK_PIN_NO(136) | 2) + +#define MT2712_PIN_137_KPCOL3__FUNC_GPIO137 (MTK_PIN_NO(137) | 0) +#define MT2712_PIN_137_KPCOL3__FUNC_KCOL3 (MTK_PIN_NO(137) | 1) +#define MT2712_PIN_137_KPCOL3__FUNC_DISP2_PWM (MTK_PIN_NO(137) | 2) + +#define MT2712_PIN_138_KPCOL4__FUNC_GPIO138 (MTK_PIN_NO(138) | 0) +#define MT2712_PIN_138_KPCOL4__FUNC_KCOL4 (MTK_PIN_NO(138) | 1) +#define MT2712_PIN_138_KPCOL4__FUNC_LCM_RST2 (MTK_PIN_NO(138) | 2) + +#define MT2712_PIN_139_KPCOL5__FUNC_GPIO139 (MTK_PIN_NO(139) | 0) +#define MT2712_PIN_139_KPCOL5__FUNC_KCOL5 (MTK_PIN_NO(139) | 1) +#define MT2712_PIN_139_KPCOL5__FUNC_DSIA_TE (MTK_PIN_NO(139) | 3) +#define MT2712_PIN_139_KPCOL5__FUNC_PURE_HW_PROTECT (MTK_PIN_NO(139) | 4) + +#define MT2712_PIN_140_KPCOL6__FUNC_GPIO140 (MTK_PIN_NO(140) | 0) +#define MT2712_PIN_140_KPCOL6__FUNC_KCOL6 (MTK_PIN_NO(140) | 1) +#define MT2712_PIN_140_KPCOL6__FUNC_WATCH_DOG (MTK_PIN_NO(140) | 2) +#define MT2712_PIN_140_KPCOL6__FUNC_LCM_RST1 (MTK_PIN_NO(140) | 3) + +#define MT2712_PIN_141_KPROW5__FUNC_GPIO141 (MTK_PIN_NO(141) | 0) +#define MT2712_PIN_141_KPROW5__FUNC_KROW5 (MTK_PIN_NO(141) | 1) +#define MT2712_PIN_141_KPROW5__FUNC_LCM_RST0 (MTK_PIN_NO(141) | 3) +#define MT2712_PIN_141_KPROW5__FUNC_PURE_HW_PROTECT (MTK_PIN_NO(141) | 4) + +#define MT2712_PIN_142_KPROW6__FUNC_GPIO142 (MTK_PIN_NO(142) | 0) +#define MT2712_PIN_142_KPROW6__FUNC_KROW6 (MTK_PIN_NO(142) | 1) +#define MT2712_PIN_142_KPROW6__FUNC_SRCLKENA0 (MTK_PIN_NO(142) | 2) +#define MT2712_PIN_142_KPROW6__FUNC_DSIB_TE (MTK_PIN_NO(142) | 3) + +#define MT2712_PIN_143_JTDO_ICE__FUNC_GPIO143 (MTK_PIN_NO(143) | 0) +#define MT2712_PIN_143_JTDO_ICE__FUNC_JTDO_ICE (MTK_PIN_NO(143) | 1) +#define MT2712_PIN_143_JTDO_ICE__FUNC_DFD_TDO (MTK_PIN_NO(143) | 3) + +#define MT2712_PIN_144_JTCK_ICE__FUNC_GPIO144 (MTK_PIN_NO(144) | 0) +#define MT2712_PIN_144_JTCK_ICE__FUNC_JTCK_ICE (MTK_PIN_NO(144) | 1) +#define MT2712_PIN_144_JTCK_ICE__FUNC_DFD_TCK (MTK_PIN_NO(144) | 3) + +#define MT2712_PIN_145_JTDI_ICE__FUNC_GPIO145 (MTK_PIN_NO(145) | 0) +#define MT2712_PIN_145_JTDI_ICE__FUNC_JTDI_ICE (MTK_PIN_NO(145) | 1) +#define MT2712_PIN_145_JTDI_ICE__FUNC_DFD_TDI (MTK_PIN_NO(145) | 3) + +#define MT2712_PIN_146_JTMS_ICE__FUNC_GPIO146 (MTK_PIN_NO(146) | 0) +#define MT2712_PIN_146_JTMS_ICE__FUNC_JTMS_ICE (MTK_PIN_NO(146) | 1) +#define MT2712_PIN_146_JTMS_ICE__FUNC_DFD_TMS (MTK_PIN_NO(146) | 3) + +#define MT2712_PIN_147_JTRSTB_ICE__FUNC_GPIO147 (MTK_PIN_NO(147) | 0) +#define MT2712_PIN_147_JTRSTB_ICE__FUNC_JTRST_B_ICE (MTK_PIN_NO(147) | 1) +#define MT2712_PIN_147_JTRSTB_ICE__FUNC_DFD_NTRST (MTK_PIN_NO(147) | 3) + +#define MT2712_PIN_148_GPIO148__FUNC_GPIO148 (MTK_PIN_NO(148) | 0) +#define MT2712_PIN_148_GPIO148__FUNC_JTRSTB_CM4 (MTK_PIN_NO(148) | 1) +#define MT2712_PIN_148_GPIO148__FUNC_DFD_NTRST (MTK_PIN_NO(148) | 3) + +#define MT2712_PIN_149_GPIO149__FUNC_GPIO149 (MTK_PIN_NO(149) | 0) +#define MT2712_PIN_149_GPIO149__FUNC_JTCK_CM4 (MTK_PIN_NO(149) | 1) +#define MT2712_PIN_149_GPIO149__FUNC_DFD_TCK (MTK_PIN_NO(149) | 3) + +#define MT2712_PIN_150_GPIO150__FUNC_GPIO150 (MTK_PIN_NO(150) | 0) +#define MT2712_PIN_150_GPIO150__FUNC_JTMS_CM4 (MTK_PIN_NO(150) | 1) +#define MT2712_PIN_150_GPIO150__FUNC_DFD_TMS (MTK_PIN_NO(150) | 3) + +#define MT2712_PIN_151_GPIO151__FUNC_GPIO151 (MTK_PIN_NO(151) | 0) +#define MT2712_PIN_151_GPIO151__FUNC_JTDI_CM4 (MTK_PIN_NO(151) | 1) +#define MT2712_PIN_151_GPIO151__FUNC_DFD_TDI (MTK_PIN_NO(151) | 3) + +#define MT2712_PIN_152_GPIO152__FUNC_GPIO152 (MTK_PIN_NO(152) | 0) +#define MT2712_PIN_152_GPIO152__FUNC_JTDO_CM4 (MTK_PIN_NO(152) | 1) +#define MT2712_PIN_152_GPIO152__FUNC_DFD_TDO (MTK_PIN_NO(152) | 3) + +#define MT2712_PIN_153_SPI0_CSN__FUNC_GPIO153 (MTK_PIN_NO(153) | 0) +#define MT2712_PIN_153_SPI0_CSN__FUNC_SPI_CS_0_ (MTK_PIN_NO(153) | 1) +#define MT2712_PIN_153_SPI0_CSN__FUNC_SRCLKENA0 (MTK_PIN_NO(153) | 2) +#define MT2712_PIN_153_SPI0_CSN__FUNC_UTXD0 (MTK_PIN_NO(153) | 3) +#define MT2712_PIN_153_SPI0_CSN__FUNC_I2SO0_DO1 (MTK_PIN_NO(153) | 4) +#define MT2712_PIN_153_SPI0_CSN__FUNC_TDMO0_DATA1 (MTK_PIN_NO(153) | 6) +#define MT2712_PIN_153_SPI0_CSN__FUNC_I2S_IQ2_SDQB (MTK_PIN_NO(153) | 7) + +#define MT2712_PIN_154_SPI0_MI__FUNC_GPIO154 (MTK_PIN_NO(154) | 0) +#define MT2712_PIN_154_SPI0_MI__FUNC_SPI_MI_0_ (MTK_PIN_NO(154) | 1) +#define MT2712_PIN_154_SPI0_MI__FUNC_SRCLKENA0 (MTK_PIN_NO(154) | 2) +#define MT2712_PIN_154_SPI0_MI__FUNC_URXD0 (MTK_PIN_NO(154) | 3) +#define MT2712_PIN_154_SPI0_MI__FUNC_I2SO0_DO0 (MTK_PIN_NO(154) | 4) +#define MT2712_PIN_154_SPI0_MI__FUNC_I2SO1_DO (MTK_PIN_NO(154) | 5) +#define MT2712_PIN_154_SPI0_MI__FUNC_TDMO0_DATA (MTK_PIN_NO(154) | 6) +#define MT2712_PIN_154_SPI0_MI__FUNC_I2S_IQ1_SDIB (MTK_PIN_NO(154) | 7) + +#define MT2712_PIN_155_SPI0_CK__FUNC_GPIO155 (MTK_PIN_NO(155) | 0) +#define MT2712_PIN_155_SPI0_CK__FUNC_SPI_CK_0_ (MTK_PIN_NO(155) | 1) +#define MT2712_PIN_155_SPI0_CK__FUNC_SC_APBIAS_OFF (MTK_PIN_NO(155) | 2) +#define MT2712_PIN_155_SPI0_CK__FUNC_UTXD1 (MTK_PIN_NO(155) | 3) +#define MT2712_PIN_155_SPI0_CK__FUNC_I2SO0_BCK (MTK_PIN_NO(155) | 4) +#define MT2712_PIN_155_SPI0_CK__FUNC_I2SO1_BCK (MTK_PIN_NO(155) | 5) +#define MT2712_PIN_155_SPI0_CK__FUNC_TDMO0_BCK (MTK_PIN_NO(155) | 6) +#define MT2712_PIN_155_SPI0_CK__FUNC_I2S_IQ0_SDQB (MTK_PIN_NO(155) | 7) + +#define MT2712_PIN_156_SPI0_MO__FUNC_GPIO156 (MTK_PIN_NO(156) | 0) +#define MT2712_PIN_156_SPI0_MO__FUNC_SPI_MO_0_ (MTK_PIN_NO(156) | 1) +#define MT2712_PIN_156_SPI0_MO__FUNC_SC_APBIAS_OFF (MTK_PIN_NO(156) | 2) +#define MT2712_PIN_156_SPI0_MO__FUNC_URXD1 (MTK_PIN_NO(156) | 3) +#define MT2712_PIN_156_SPI0_MO__FUNC_I2SO0_WS (MTK_PIN_NO(156) | 4) +#define MT2712_PIN_156_SPI0_MO__FUNC_I2SO1_WS (MTK_PIN_NO(156) | 5) +#define MT2712_PIN_156_SPI0_MO__FUNC_TDMO0_LRCK (MTK_PIN_NO(156) | 6) +#define MT2712_PIN_156_SPI0_MO__FUNC_I2S_IQ0_SDIB (MTK_PIN_NO(156) | 7) + +#define MT2712_PIN_157_SPI5_CSN__FUNC_GPIO157 (MTK_PIN_NO(157) | 0) +#define MT2712_PIN_157_SPI5_CSN__FUNC_SPI_CS_5_ (MTK_PIN_NO(157) | 1) +#define MT2712_PIN_157_SPI5_CSN__FUNC_LCM_RST0 (MTK_PIN_NO(157) | 2) +#define MT2712_PIN_157_SPI5_CSN__FUNC_UTXD2 (MTK_PIN_NO(157) | 3) +#define MT2712_PIN_157_SPI5_CSN__FUNC_I2SO0_MCK (MTK_PIN_NO(157) | 4) +#define MT2712_PIN_157_SPI5_CSN__FUNC_I2SO1_MCK (MTK_PIN_NO(157) | 5) +#define MT2712_PIN_157_SPI5_CSN__FUNC_TDMO0_MCLK (MTK_PIN_NO(157) | 6) + +#define MT2712_PIN_158_SPI5_MI__FUNC_GPIO158 (MTK_PIN_NO(158) | 0) +#define MT2712_PIN_158_SPI5_MI__FUNC_SPI_MI_5_ (MTK_PIN_NO(158) | 1) +#define MT2712_PIN_158_SPI5_MI__FUNC_DSIA_TE (MTK_PIN_NO(158) | 2) +#define MT2712_PIN_158_SPI5_MI__FUNC_URXD2 (MTK_PIN_NO(158) | 3) + +#define MT2712_PIN_159_SPI5_MO__FUNC_GPIO159 (MTK_PIN_NO(159) | 0) +#define MT2712_PIN_159_SPI5_MO__FUNC_SPI_MO_5_ (MTK_PIN_NO(159) | 1) +#define MT2712_PIN_159_SPI5_MO__FUNC_DSIB_TE (MTK_PIN_NO(159) | 2) +#define MT2712_PIN_159_SPI5_MO__FUNC_UTXD3 (MTK_PIN_NO(159) | 3) + +#define MT2712_PIN_160_SPI5_CK__FUNC_GPIO160 (MTK_PIN_NO(160) | 0) +#define MT2712_PIN_160_SPI5_CK__FUNC_SPI_CK_5_ (MTK_PIN_NO(160) | 1) +#define MT2712_PIN_160_SPI5_CK__FUNC_LCM_RST1 (MTK_PIN_NO(160) | 2) +#define MT2712_PIN_160_SPI5_CK__FUNC_URXD3 (MTK_PIN_NO(160) | 3) + +#define MT2712_PIN_161_SPI1_CSN__FUNC_GPIO161 (MTK_PIN_NO(161) | 0) +#define MT2712_PIN_161_SPI1_CSN__FUNC_SPI_CS_1_ (MTK_PIN_NO(161) | 1) +#define MT2712_PIN_161_SPI1_CSN__FUNC_SPI_CS_4_ (MTK_PIN_NO(161) | 2) +#define MT2712_PIN_161_SPI1_CSN__FUNC_I2S_IQ2_SDQB (MTK_PIN_NO(161) | 4) +#define MT2712_PIN_161_SPI1_CSN__FUNC_I2SO2_DO (MTK_PIN_NO(161) | 5) +#define MT2712_PIN_161_SPI1_CSN__FUNC_TDMO0_DATA1 (MTK_PIN_NO(161) | 6) +#define MT2712_PIN_161_SPI1_CSN__FUNC_I2SO0_DO1 (MTK_PIN_NO(161) | 7) + +#define MT2712_PIN_162_SPI1_SI__FUNC_GPIO162 (MTK_PIN_NO(162) | 0) +#define MT2712_PIN_162_SPI1_SI__FUNC_SPI_SI_1_ (MTK_PIN_NO(162) | 1) +#define MT2712_PIN_162_SPI1_SI__FUNC_SPI_MI_4_ (MTK_PIN_NO(162) | 2) +#define MT2712_PIN_162_SPI1_SI__FUNC_I2S_IQ1_SDIB (MTK_PIN_NO(162) | 4) +#define MT2712_PIN_162_SPI1_SI__FUNC_I2SO2_BCK (MTK_PIN_NO(162) | 5) +#define MT2712_PIN_162_SPI1_SI__FUNC_TDMO0_DATA (MTK_PIN_NO(162) | 6) +#define MT2712_PIN_162_SPI1_SI__FUNC_I2SO0_DO0 (MTK_PIN_NO(162) | 7) + +#define MT2712_PIN_163_SPI1_CK__FUNC_GPIO163 (MTK_PIN_NO(163) | 0) +#define MT2712_PIN_163_SPI1_CK__FUNC_SPI_CK_1_ (MTK_PIN_NO(163) | 1) +#define MT2712_PIN_163_SPI1_CK__FUNC_SPI_CK_4_ (MTK_PIN_NO(163) | 2) +#define MT2712_PIN_163_SPI1_CK__FUNC_I2S_IQ0_SDQB (MTK_PIN_NO(163) | 4) +#define MT2712_PIN_163_SPI1_CK__FUNC_I2SO2_WS (MTK_PIN_NO(163) | 5) +#define MT2712_PIN_163_SPI1_CK__FUNC_TDMO0_BCK (MTK_PIN_NO(163) | 6) +#define MT2712_PIN_163_SPI1_CK__FUNC_I2SO0_BCK (MTK_PIN_NO(163) | 7) + +#define MT2712_PIN_164_SPI1_SO__FUNC_GPIO164 (MTK_PIN_NO(164) | 0) +#define MT2712_PIN_164_SPI1_SO__FUNC_SPI_SO_1_ (MTK_PIN_NO(164) | 1) +#define MT2712_PIN_164_SPI1_SO__FUNC_SPI_MO_4_ (MTK_PIN_NO(164) | 2) +#define MT2712_PIN_164_SPI1_SO__FUNC_I2S_IQ0_SDIB (MTK_PIN_NO(164) | 4) +#define MT2712_PIN_164_SPI1_SO__FUNC_I2SO2_MCK (MTK_PIN_NO(164) | 5) +#define MT2712_PIN_164_SPI1_SO__FUNC_TDMO0_LRCK (MTK_PIN_NO(164) | 6) +#define MT2712_PIN_164_SPI1_SO__FUNC_I2SO0_WS (MTK_PIN_NO(164) | 7) + +#define MT2712_PIN_165_SPI4_CSN__FUNC_GPIO165 (MTK_PIN_NO(165) | 0) +#define MT2712_PIN_165_SPI4_CSN__FUNC_SPI_CS_4_ (MTK_PIN_NO(165) | 1) +#define MT2712_PIN_165_SPI4_CSN__FUNC_LCM_RST0 (MTK_PIN_NO(165) | 2) +#define MT2712_PIN_165_SPI4_CSN__FUNC_SPI_CS_1_ (MTK_PIN_NO(165) | 3) +#define MT2712_PIN_165_SPI4_CSN__FUNC_UTXD4 (MTK_PIN_NO(165) | 4) +#define MT2712_PIN_165_SPI4_CSN__FUNC_I2SO1_DO (MTK_PIN_NO(165) | 5) +#define MT2712_PIN_165_SPI4_CSN__FUNC_TDMO0_MCLK (MTK_PIN_NO(165) | 6) +#define MT2712_PIN_165_SPI4_CSN__FUNC_I2SO0_MCK (MTK_PIN_NO(165) | 7) + +#define MT2712_PIN_166_SPI4_MI__FUNC_GPIO166 (MTK_PIN_NO(166) | 0) +#define MT2712_PIN_166_SPI4_MI__FUNC_SPI_MI_4_ (MTK_PIN_NO(166) | 1) +#define MT2712_PIN_166_SPI4_MI__FUNC_DSIA_TE (MTK_PIN_NO(166) | 2) +#define MT2712_PIN_166_SPI4_MI__FUNC_SPI_SI_1_ (MTK_PIN_NO(166) | 3) +#define MT2712_PIN_166_SPI4_MI__FUNC_URXD4 (MTK_PIN_NO(166) | 4) +#define MT2712_PIN_166_SPI4_MI__FUNC_I2SO1_BCK (MTK_PIN_NO(166) | 5) + +#define MT2712_PIN_167_SPI4_MO__FUNC_GPIO167 (MTK_PIN_NO(167) | 0) +#define MT2712_PIN_167_SPI4_MO__FUNC_SPI_MO_4_ (MTK_PIN_NO(167) | 1) +#define MT2712_PIN_167_SPI4_MO__FUNC_DSIB_TE (MTK_PIN_NO(167) | 2) +#define MT2712_PIN_167_SPI4_MO__FUNC_SPI_SO_1_ (MTK_PIN_NO(167) | 3) +#define MT2712_PIN_167_SPI4_MO__FUNC_UTXD5 (MTK_PIN_NO(167) | 4) +#define MT2712_PIN_167_SPI4_MO__FUNC_I2SO1_WS (MTK_PIN_NO(167) | 5) + +#define MT2712_PIN_168_SPI4_CK__FUNC_GPIO168 (MTK_PIN_NO(168) | 0) +#define MT2712_PIN_168_SPI4_CK__FUNC_SPI_CK_4_ (MTK_PIN_NO(168) | 1) +#define MT2712_PIN_168_SPI4_CK__FUNC_LCM_RST1 (MTK_PIN_NO(168) | 2) +#define MT2712_PIN_168_SPI4_CK__FUNC_SPI_CK_1_ (MTK_PIN_NO(168) | 3) +#define MT2712_PIN_168_SPI4_CK__FUNC_URXD5 (MTK_PIN_NO(168) | 4) +#define MT2712_PIN_168_SPI4_CK__FUNC_I2SO1_MCK (MTK_PIN_NO(168) | 5) + +#define MT2712_PIN_169_I2SI0_DATA__FUNC_GPIO169 (MTK_PIN_NO(169) | 0) +#define MT2712_PIN_169_I2SI0_DATA__FUNC_I2SI0_DI (MTK_PIN_NO(169) | 1) +#define MT2712_PIN_169_I2SI0_DATA__FUNC_I2SI1_DI (MTK_PIN_NO(169) | 2) +#define MT2712_PIN_169_I2SI0_DATA__FUNC_I2SI2_DI (MTK_PIN_NO(169) | 3) +#define MT2712_PIN_169_I2SI0_DATA__FUNC_TDMIN_DI (MTK_PIN_NO(169) | 4) + +#define MT2712_PIN_170_I2SI0_LRCK__FUNC_GPIO170 (MTK_PIN_NO(170) | 0) +#define MT2712_PIN_170_I2SI0_LRCK__FUNC_I2SI0_WS (MTK_PIN_NO(170) | 1) +#define MT2712_PIN_170_I2SI0_LRCK__FUNC_I2SI1_WS (MTK_PIN_NO(170) | 2) +#define MT2712_PIN_170_I2SI0_LRCK__FUNC_I2SI2_WS (MTK_PIN_NO(170) | 3) +#define MT2712_PIN_170_I2SI0_LRCK__FUNC_TDMIN_LRCK (MTK_PIN_NO(170) | 4) +#define MT2712_PIN_170_I2SI0_LRCK__FUNC_TDMO0_DATA3 (MTK_PIN_NO(170) | 5) +#define MT2712_PIN_170_I2SI0_LRCK__FUNC_TDMO1_DATA3 (MTK_PIN_NO(170) | 6) + +#define MT2712_PIN_171_I2SI0_MCLK__FUNC_GPIO171 (MTK_PIN_NO(171) | 0) +#define MT2712_PIN_171_I2SI0_MCLK__FUNC_I2SI0_MCK (MTK_PIN_NO(171) | 1) +#define MT2712_PIN_171_I2SI0_MCLK__FUNC_I2SI1_MCK (MTK_PIN_NO(171) | 2) +#define MT2712_PIN_171_I2SI0_MCLK__FUNC_I2SI2_MCK (MTK_PIN_NO(171) | 3) +#define MT2712_PIN_171_I2SI0_MCLK__FUNC_TDMIN_MCLK (MTK_PIN_NO(171) | 4) +#define MT2712_PIN_171_I2SI0_MCLK__FUNC_TDMO0_DATA2 (MTK_PIN_NO(171) | 5) +#define MT2712_PIN_171_I2SI0_MCLK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(171) | 6) + +#define MT2712_PIN_172_I2SI0_BCK__FUNC_GPIO172 (MTK_PIN_NO(172) | 0) +#define MT2712_PIN_172_I2SI0_BCK__FUNC_I2SI0_BCK (MTK_PIN_NO(172) | 1) +#define MT2712_PIN_172_I2SI0_BCK__FUNC_I2SI1_BCK (MTK_PIN_NO(172) | 2) +#define MT2712_PIN_172_I2SI0_BCK__FUNC_I2SI2_BCK (MTK_PIN_NO(172) | 3) +#define MT2712_PIN_172_I2SI0_BCK__FUNC_TDMIN_BCK (MTK_PIN_NO(172) | 4) +#define MT2712_PIN_172_I2SI0_BCK__FUNC_TDMO0_DATA1 (MTK_PIN_NO(172) | 5) +#define MT2712_PIN_172_I2SI0_BCK__FUNC_TDMO1_DATA1 (MTK_PIN_NO(172) | 6) + +#define MT2712_PIN_173_I2SI2_DATA__FUNC_GPIO173 (MTK_PIN_NO(173) | 0) +#define MT2712_PIN_173_I2SI2_DATA__FUNC_I2SI2_DI (MTK_PIN_NO(173) | 1) +#define MT2712_PIN_173_I2SI2_DATA__FUNC_I2SI0_DI (MTK_PIN_NO(173) | 2) +#define MT2712_PIN_173_I2SI2_DATA__FUNC_I2SI1_DI (MTK_PIN_NO(173) | 3) +#define MT2712_PIN_173_I2SI2_DATA__FUNC_PCM1_DI (MTK_PIN_NO(173) | 4) +#define MT2712_PIN_173_I2SI2_DATA__FUNC_TDMIN_DI (MTK_PIN_NO(173) | 5) +#define MT2712_PIN_173_I2SI2_DATA__FUNC_PCM1_DO (MTK_PIN_NO(173) | 6) + +#define MT2712_PIN_174_I2SI2_MCLK__FUNC_GPIO174 (MTK_PIN_NO(174) | 0) +#define MT2712_PIN_174_I2SI2_MCLK__FUNC_I2SI2_MCK (MTK_PIN_NO(174) | 1) +#define MT2712_PIN_174_I2SI2_MCLK__FUNC_I2SI0_MCK (MTK_PIN_NO(174) | 2) +#define MT2712_PIN_174_I2SI2_MCLK__FUNC_I2SI1_MCK (MTK_PIN_NO(174) | 3) +#define MT2712_PIN_174_I2SI2_MCLK__FUNC_PCM1_DO (MTK_PIN_NO(174) | 4) +#define MT2712_PIN_174_I2SI2_MCLK__FUNC_TDMIN_MCLK (MTK_PIN_NO(174) | 5) +#define MT2712_PIN_174_I2SI2_MCLK__FUNC_PCM1_DI (MTK_PIN_NO(174) | 6) +#define MT2712_PIN_174_I2SI2_MCLK__FUNC_I2S_IQ2_SDQB (MTK_PIN_NO(174) | 7) + +#define MT2712_PIN_175_I2SI2_BCK__FUNC_GPIO175 (MTK_PIN_NO(175) | 0) +#define MT2712_PIN_175_I2SI2_BCK__FUNC_I2SI2_BCK (MTK_PIN_NO(175) | 1) +#define MT2712_PIN_175_I2SI2_BCK__FUNC_I2SI0_BCK (MTK_PIN_NO(175) | 2) +#define MT2712_PIN_175_I2SI2_BCK__FUNC_I2SI1_BCK (MTK_PIN_NO(175) | 3) +#define MT2712_PIN_175_I2SI2_BCK__FUNC_PCM1_CLK (MTK_PIN_NO(175) | 4) +#define MT2712_PIN_175_I2SI2_BCK__FUNC_TDMIN_BCK (MTK_PIN_NO(175) | 5) + +#define MT2712_PIN_176_I2SI2_LRCK__FUNC_GPIO176 (MTK_PIN_NO(176) | 0) +#define MT2712_PIN_176_I2SI2_LRCK__FUNC_I2SI2_WS (MTK_PIN_NO(176) | 1) +#define MT2712_PIN_176_I2SI2_LRCK__FUNC_I2SI0_WS (MTK_PIN_NO(176) | 2) +#define MT2712_PIN_176_I2SI2_LRCK__FUNC_I2SI1_WS (MTK_PIN_NO(176) | 3) +#define MT2712_PIN_176_I2SI2_LRCK__FUNC_PCM1_SYNC (MTK_PIN_NO(176) | 4) +#define MT2712_PIN_176_I2SI2_LRCK__FUNC_TDMIN_LRCK (MTK_PIN_NO(176) | 5) + +#define MT2712_PIN_177_I2SI1_DATA__FUNC_GPIO177 (MTK_PIN_NO(177) | 0) +#define MT2712_PIN_177_I2SI1_DATA__FUNC_I2SI1_DI (MTK_PIN_NO(177) | 1) +#define MT2712_PIN_177_I2SI1_DATA__FUNC_I2SI0_DI (MTK_PIN_NO(177) | 2) +#define MT2712_PIN_177_I2SI1_DATA__FUNC_I2SI2_DI (MTK_PIN_NO(177) | 3) +#define MT2712_PIN_177_I2SI1_DATA__FUNC_TDMIN_DI (MTK_PIN_NO(177) | 4) + +#define MT2712_PIN_178_I2SI1_BCK__FUNC_GPIO178 (MTK_PIN_NO(178) | 0) +#define MT2712_PIN_178_I2SI1_BCK__FUNC_I2SI1_BCK (MTK_PIN_NO(178) | 1) +#define MT2712_PIN_178_I2SI1_BCK__FUNC_I2SI0_BCK (MTK_PIN_NO(178) | 2) +#define MT2712_PIN_178_I2SI1_BCK__FUNC_I2SI2_BCK (MTK_PIN_NO(178) | 3) +#define MT2712_PIN_178_I2SI1_BCK__FUNC_TDMIN_BCK (MTK_PIN_NO(178) | 4) +#define MT2712_PIN_178_I2SI1_BCK__FUNC_TDMO0_DATA3 (MTK_PIN_NO(178) | 5) +#define MT2712_PIN_178_I2SI1_BCK__FUNC_TDMO1_DATA3 (MTK_PIN_NO(178) | 6) + +#define MT2712_PIN_179_I2SI1_LRCK__FUNC_GPIO179 (MTK_PIN_NO(179) | 0) +#define MT2712_PIN_179_I2SI1_LRCK__FUNC_I2SI1_WS (MTK_PIN_NO(179) | 1) +#define MT2712_PIN_179_I2SI1_LRCK__FUNC_I2SI0_WS (MTK_PIN_NO(179) | 2) +#define MT2712_PIN_179_I2SI1_LRCK__FUNC_I2SI2_WS (MTK_PIN_NO(179) | 3) +#define MT2712_PIN_179_I2SI1_LRCK__FUNC_TDMIN_LRCK (MTK_PIN_NO(179) | 4) +#define MT2712_PIN_179_I2SI1_LRCK__FUNC_TDMO0_DATA2 (MTK_PIN_NO(179) | 5) +#define MT2712_PIN_179_I2SI1_LRCK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(179) | 6) + +#define MT2712_PIN_180_I2SI1_MCLK__FUNC_GPIO180 (MTK_PIN_NO(180) | 0) +#define MT2712_PIN_180_I2SI1_MCLK__FUNC_I2SI1_MCK (MTK_PIN_NO(180) | 1) +#define MT2712_PIN_180_I2SI1_MCLK__FUNC_I2SI0_MCK (MTK_PIN_NO(180) | 2) +#define MT2712_PIN_180_I2SI1_MCLK__FUNC_I2SI2_MCK (MTK_PIN_NO(180) | 3) +#define MT2712_PIN_180_I2SI1_MCLK__FUNC_TDMIN_MCLK (MTK_PIN_NO(180) | 4) +#define MT2712_PIN_180_I2SI1_MCLK__FUNC_TDMO0_DATA1 (MTK_PIN_NO(180) | 5) +#define MT2712_PIN_180_I2SI1_MCLK__FUNC_TDMO1_DATA1 (MTK_PIN_NO(180) | 6) +#define MT2712_PIN_180_I2SI1_MCLK__FUNC_I2S_IQ2_SDIB (MTK_PIN_NO(180) | 7) + +#define MT2712_PIN_181_I2SO1_DATA0__FUNC_GPIO181 (MTK_PIN_NO(181) | 0) +#define MT2712_PIN_181_I2SO1_DATA0__FUNC_I2SO1_DO (MTK_PIN_NO(181) | 1) +#define MT2712_PIN_181_I2SO1_DATA0__FUNC_I2SO0_DO0 (MTK_PIN_NO(181) | 2) +#define MT2712_PIN_181_I2SO1_DATA0__FUNC_I2SO2_DO (MTK_PIN_NO(181) | 3) +#define MT2712_PIN_181_I2SO1_DATA0__FUNC_DAI_TX (MTK_PIN_NO(181) | 4) +#define MT2712_PIN_181_I2SO1_DATA0__FUNC_TDMIN_MCLK (MTK_PIN_NO(181) | 5) +#define MT2712_PIN_181_I2SO1_DATA0__FUNC_I2S_IQ2_SDIA (MTK_PIN_NO(181) | 7) + +#define MT2712_PIN_182_I2SO1_BCK__FUNC_GPIO182 (MTK_PIN_NO(182) | 0) +#define MT2712_PIN_182_I2SO1_BCK__FUNC_I2SO1_BCK (MTK_PIN_NO(182) | 1) +#define MT2712_PIN_182_I2SO1_BCK__FUNC_I2SO0_BCK (MTK_PIN_NO(182) | 2) +#define MT2712_PIN_182_I2SO1_BCK__FUNC_I2SO2_BCK (MTK_PIN_NO(182) | 3) +#define MT2712_PIN_182_I2SO1_BCK__FUNC_DAI_SYNC (MTK_PIN_NO(182) | 4) +#define MT2712_PIN_182_I2SO1_BCK__FUNC_TDMIN_BCK (MTK_PIN_NO(182) | 5) +#define MT2712_PIN_182_I2SO1_BCK__FUNC_TDMO0_DATA3 (MTK_PIN_NO(182) | 6) +#define MT2712_PIN_182_I2SO1_BCK__FUNC_I2S_IQ2_BCK (MTK_PIN_NO(182) | 7) + +#define MT2712_PIN_183_I2SO1_LRCK__FUNC_GPIO183 (MTK_PIN_NO(183) | 0) +#define MT2712_PIN_183_I2SO1_LRCK__FUNC_I2SO1_WS (MTK_PIN_NO(183) | 1) +#define MT2712_PIN_183_I2SO1_LRCK__FUNC_I2SO0_WS (MTK_PIN_NO(183) | 2) +#define MT2712_PIN_183_I2SO1_LRCK__FUNC_I2SO2_WS (MTK_PIN_NO(183) | 3) +#define MT2712_PIN_183_I2SO1_LRCK__FUNC_DAI_CLK (MTK_PIN_NO(183) | 4) +#define MT2712_PIN_183_I2SO1_LRCK__FUNC_TDMIN_DI (MTK_PIN_NO(183) | 5) +#define MT2712_PIN_183_I2SO1_LRCK__FUNC_TDMO0_DATA2 (MTK_PIN_NO(183) | 6) +#define MT2712_PIN_183_I2SO1_LRCK__FUNC_I2S_IQ2_WS (MTK_PIN_NO(183) | 7) + +#define MT2712_PIN_184_I2SO1_MCLK__FUNC_GPIO184 (MTK_PIN_NO(184) | 0) +#define MT2712_PIN_184_I2SO1_MCLK__FUNC_I2SO1_MCK (MTK_PIN_NO(184) | 1) +#define MT2712_PIN_184_I2SO1_MCLK__FUNC_I2SO0_MCK (MTK_PIN_NO(184) | 2) +#define MT2712_PIN_184_I2SO1_MCLK__FUNC_I2SO2_MCK (MTK_PIN_NO(184) | 3) +#define MT2712_PIN_184_I2SO1_MCLK__FUNC_DAI_RX (MTK_PIN_NO(184) | 4) +#define MT2712_PIN_184_I2SO1_MCLK__FUNC_TDMIN_LRCK (MTK_PIN_NO(184) | 5) +#define MT2712_PIN_184_I2SO1_MCLK__FUNC_TDMO0_DATA1 (MTK_PIN_NO(184) | 6) +#define MT2712_PIN_184_I2SO1_MCLK__FUNC_I2S_IQ2_SDQA (MTK_PIN_NO(184) | 7) + +#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_GPIO185 (MTK_PIN_NO(185) | 0) +#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_AUD_EXT_CK2 (MTK_PIN_NO(185) | 1) +#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_AUD_EXT_CK1 (MTK_PIN_NO(185) | 2) +#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_I2SO1_DO (MTK_PIN_NO(185) | 3) +#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_I2SI2_DI (MTK_PIN_NO(185) | 4) +#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_MRG_RX (MTK_PIN_NO(185) | 5) +#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_PCM1_DI (MTK_PIN_NO(185) | 6) +#define MT2712_PIN_185_AUD_EXT_CK2__FUNC_I2S_IQ0_SDQB (MTK_PIN_NO(185) | 7) + +#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_GPIO186 (MTK_PIN_NO(186) | 0) +#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_AUD_EXT_CK1 (MTK_PIN_NO(186) | 1) +#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_AUD_EXT_CK2 (MTK_PIN_NO(186) | 2) +#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_I2SO0_DO1 (MTK_PIN_NO(186) | 3) +#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_I2SI1_DI (MTK_PIN_NO(186) | 4) +#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_MRG_TX (MTK_PIN_NO(186) | 5) +#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_PCM1_DO (MTK_PIN_NO(186) | 6) +#define MT2712_PIN_186_AUD_EXT_CK1__FUNC_I2S_IQ0_SDIB (MTK_PIN_NO(186) | 7) + +#define MT2712_PIN_187_I2SO2_BCK__FUNC_GPIO187 (MTK_PIN_NO(187) | 0) +#define MT2712_PIN_187_I2SO2_BCK__FUNC_I2SO2_BCK (MTK_PIN_NO(187) | 1) +#define MT2712_PIN_187_I2SO2_BCK__FUNC_I2SO0_BCK (MTK_PIN_NO(187) | 2) +#define MT2712_PIN_187_I2SO2_BCK__FUNC_I2SO1_BCK (MTK_PIN_NO(187) | 3) +#define MT2712_PIN_187_I2SO2_BCK__FUNC_PCM1_CLK (MTK_PIN_NO(187) | 4) +#define MT2712_PIN_187_I2SO2_BCK__FUNC_MRG_SYNC (MTK_PIN_NO(187) | 5) +#define MT2712_PIN_187_I2SO2_BCK__FUNC_TDMO1_DATA3 (MTK_PIN_NO(187) | 6) +#define MT2712_PIN_187_I2SO2_BCK__FUNC_I2S_IQ0_BCK (MTK_PIN_NO(187) | 7) + +#define MT2712_PIN_188_I2SO2_LRCK__FUNC_GPIO188 (MTK_PIN_NO(188) | 0) +#define MT2712_PIN_188_I2SO2_LRCK__FUNC_I2SO2_WS (MTK_PIN_NO(188) | 1) +#define MT2712_PIN_188_I2SO2_LRCK__FUNC_I2SO0_WS (MTK_PIN_NO(188) | 2) +#define MT2712_PIN_188_I2SO2_LRCK__FUNC_I2SO1_WS (MTK_PIN_NO(188) | 3) +#define MT2712_PIN_188_I2SO2_LRCK__FUNC_PCM1_SYNC (MTK_PIN_NO(188) | 4) +#define MT2712_PIN_188_I2SO2_LRCK__FUNC_MRG_CLK (MTK_PIN_NO(188) | 5) +#define MT2712_PIN_188_I2SO2_LRCK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(188) | 6) +#define MT2712_PIN_188_I2SO2_LRCK__FUNC_I2S_IQ0_WS (MTK_PIN_NO(188) | 7) + +#define MT2712_PIN_189_I2SO2_MCLK__FUNC_GPIO189 (MTK_PIN_NO(189) | 0) +#define MT2712_PIN_189_I2SO2_MCLK__FUNC_I2SO2_MCK (MTK_PIN_NO(189) | 1) +#define MT2712_PIN_189_I2SO2_MCLK__FUNC_I2SO0_MCK (MTK_PIN_NO(189) | 2) +#define MT2712_PIN_189_I2SO2_MCLK__FUNC_I2SO1_MCK (MTK_PIN_NO(189) | 3) +#define MT2712_PIN_189_I2SO2_MCLK__FUNC_PCM1_DO (MTK_PIN_NO(189) | 4) +#define MT2712_PIN_189_I2SO2_MCLK__FUNC_MRG_RX (MTK_PIN_NO(189) | 5) +#define MT2712_PIN_189_I2SO2_MCLK__FUNC_TDMO1_DATA1 (MTK_PIN_NO(189) | 6) +#define MT2712_PIN_189_I2SO2_MCLK__FUNC_I2S_IQ0_SDQA (MTK_PIN_NO(189) | 7) + +#define MT2712_PIN_190_I2SO2_DATA0__FUNC_GPIO190 (MTK_PIN_NO(190) | 0) +#define MT2712_PIN_190_I2SO2_DATA0__FUNC_I2SO2_DO (MTK_PIN_NO(190) | 1) +#define MT2712_PIN_190_I2SO2_DATA0__FUNC_I2SO0_DO0 (MTK_PIN_NO(190) | 2) +#define MT2712_PIN_190_I2SO2_DATA0__FUNC_I2SO1_DO (MTK_PIN_NO(190) | 3) +#define MT2712_PIN_190_I2SO2_DATA0__FUNC_PCM1_DI (MTK_PIN_NO(190) | 4) +#define MT2712_PIN_190_I2SO2_DATA0__FUNC_MRG_TX (MTK_PIN_NO(190) | 5) +#define MT2712_PIN_190_I2SO2_DATA0__FUNC_PCM1_DO (MTK_PIN_NO(190) | 6) +#define MT2712_PIN_190_I2SO2_DATA0__FUNC_I2S_IQ0_SDIA (MTK_PIN_NO(190) | 7) + +#define MT2712_PIN_191_I2SO0_DATA1__FUNC_GPIO191 (MTK_PIN_NO(191) | 0) +#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2SO0_DO1 (MTK_PIN_NO(191) | 1) +#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2SI0_DI (MTK_PIN_NO(191) | 2) +#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2SI1_DI (MTK_PIN_NO(191) | 3) +#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2SI2_DI (MTK_PIN_NO(191) | 4) +#define MT2712_PIN_191_I2SO0_DATA1__FUNC_DAI_TX (MTK_PIN_NO(191) | 5) +#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2S_IQ0_SDQB (MTK_PIN_NO(191) | 6) +#define MT2712_PIN_191_I2SO0_DATA1__FUNC_I2S_IQ1_SDQB (MTK_PIN_NO(191) | 7) + +#define MT2712_PIN_192_I2SO0_MCLK__FUNC_GPIO192 (MTK_PIN_NO(192) | 0) +#define MT2712_PIN_192_I2SO0_MCLK__FUNC_I2SO0_MCK (MTK_PIN_NO(192) | 1) +#define MT2712_PIN_192_I2SO0_MCLK__FUNC_I2SO1_MCK (MTK_PIN_NO(192) | 2) +#define MT2712_PIN_192_I2SO0_MCLK__FUNC_I2SO2_MCK (MTK_PIN_NO(192) | 3) +#define MT2712_PIN_192_I2SO0_MCLK__FUNC_USB4_FT_SCL (MTK_PIN_NO(192) | 4) +#define MT2712_PIN_192_I2SO0_MCLK__FUNC_TDMO1_DATA3 (MTK_PIN_NO(192) | 5) +#define MT2712_PIN_192_I2SO0_MCLK__FUNC_I2S_IQ0_SDIB (MTK_PIN_NO(192) | 6) +#define MT2712_PIN_192_I2SO0_MCLK__FUNC_I2S_IQ1_SDQA (MTK_PIN_NO(192) | 7) + +#define MT2712_PIN_193_I2SO0_DATA0__FUNC_GPIO193 (MTK_PIN_NO(193) | 0) +#define MT2712_PIN_193_I2SO0_DATA0__FUNC_I2SO0_DO0 (MTK_PIN_NO(193) | 1) +#define MT2712_PIN_193_I2SO0_DATA0__FUNC_I2SO1_DO (MTK_PIN_NO(193) | 2) +#define MT2712_PIN_193_I2SO0_DATA0__FUNC_I2SO2_DO (MTK_PIN_NO(193) | 3) +#define MT2712_PIN_193_I2SO0_DATA0__FUNC_USB4_FT_SDA (MTK_PIN_NO(193) | 4) +#define MT2712_PIN_193_I2SO0_DATA0__FUNC_I2S_IQ1_SDIA (MTK_PIN_NO(193) | 7) + +#define MT2712_PIN_194_I2SO0_LRCK__FUNC_GPIO194 (MTK_PIN_NO(194) | 0) +#define MT2712_PIN_194_I2SO0_LRCK__FUNC_I2SO0_WS (MTK_PIN_NO(194) | 1) +#define MT2712_PIN_194_I2SO0_LRCK__FUNC_I2SO1_WS (MTK_PIN_NO(194) | 2) +#define MT2712_PIN_194_I2SO0_LRCK__FUNC_I2SO2_WS (MTK_PIN_NO(194) | 3) +#define MT2712_PIN_194_I2SO0_LRCK__FUNC_USB5_FT_SCL (MTK_PIN_NO(194) | 4) +#define MT2712_PIN_194_I2SO0_LRCK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(194) | 5) +#define MT2712_PIN_194_I2SO0_LRCK__FUNC_I2S_IQ1_WS (MTK_PIN_NO(194) | 7) + +#define MT2712_PIN_195_I2SO0_BCK__FUNC_GPIO195 (MTK_PIN_NO(195) | 0) +#define MT2712_PIN_195_I2SO0_BCK__FUNC_I2SO0_BCK (MTK_PIN_NO(195) | 1) +#define MT2712_PIN_195_I2SO0_BCK__FUNC_I2SO1_BCK (MTK_PIN_NO(195) | 2) +#define MT2712_PIN_195_I2SO0_BCK__FUNC_I2SO2_BCK (MTK_PIN_NO(195) | 3) +#define MT2712_PIN_195_I2SO0_BCK__FUNC_USB5_FT_SDA (MTK_PIN_NO(195) | 4) +#define MT2712_PIN_195_I2SO0_BCK__FUNC_TDMO1_DATA1 (MTK_PIN_NO(195) | 5) +#define MT2712_PIN_195_I2SO0_BCK__FUNC_I2S_IQ1_BCK (MTK_PIN_NO(195) | 7) + +#define MT2712_PIN_196_TDMO1_MCLK__FUNC_GPIO196 (MTK_PIN_NO(196) | 0) +#define MT2712_PIN_196_TDMO1_MCLK__FUNC_TDMO1_MCLK (MTK_PIN_NO(196) | 1) +#define MT2712_PIN_196_TDMO1_MCLK__FUNC_TDMO0_MCLK (MTK_PIN_NO(196) | 2) +#define MT2712_PIN_196_TDMO1_MCLK__FUNC_TDMIN_MCLK (MTK_PIN_NO(196) | 3) +#define MT2712_PIN_196_TDMO1_MCLK__FUNC_I2SO0_DO1 (MTK_PIN_NO(196) | 6) +#define MT2712_PIN_196_TDMO1_MCLK__FUNC_I2S_IQ1_SDIB (MTK_PIN_NO(196) | 7) + +#define MT2712_PIN_197_TDMO1_LRCK__FUNC_GPIO197 (MTK_PIN_NO(197) | 0) +#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMO1_LRCK (MTK_PIN_NO(197) | 1) +#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMO0_LRCK (MTK_PIN_NO(197) | 2) +#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMIN_LRCK (MTK_PIN_NO(197) | 3) +#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMO0_DATA3 (MTK_PIN_NO(197) | 4) +#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMO1_DATA3 (MTK_PIN_NO(197) | 5) +#define MT2712_PIN_197_TDMO1_LRCK__FUNC_I2SO3_MCK (MTK_PIN_NO(197) | 6) +#define MT2712_PIN_197_TDMO1_LRCK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(197) | 7) + +#define MT2712_PIN_198_TDMO1_BCK__FUNC_GPIO198 (MTK_PIN_NO(198) | 0) +#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMO1_BCK (MTK_PIN_NO(198) | 1) +#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMO0_BCK (MTK_PIN_NO(198) | 2) +#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMIN_BCK (MTK_PIN_NO(198) | 3) +#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMO0_DATA2 (MTK_PIN_NO(198) | 4) +#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMO1_DATA2 (MTK_PIN_NO(198) | 5) +#define MT2712_PIN_198_TDMO1_BCK__FUNC_I2SO3_BCK (MTK_PIN_NO(198) | 6) +#define MT2712_PIN_198_TDMO1_BCK__FUNC_TDMO1_DATA1 (MTK_PIN_NO(198) | 7) + +#define MT2712_PIN_199_TDMO1_DATA__FUNC_GPIO199 (MTK_PIN_NO(199) | 0) +#define MT2712_PIN_199_TDMO1_DATA__FUNC_TDMO1_DATA (MTK_PIN_NO(199) | 1) +#define MT2712_PIN_199_TDMO1_DATA__FUNC_TDMO0_DATA (MTK_PIN_NO(199) | 2) +#define MT2712_PIN_199_TDMO1_DATA__FUNC_TDMIN_DI (MTK_PIN_NO(199) | 3) +#define MT2712_PIN_199_TDMO1_DATA__FUNC_TDMO0_DATA1 (MTK_PIN_NO(199) | 4) +#define MT2712_PIN_199_TDMO1_DATA__FUNC_TDMO1_DATA1 (MTK_PIN_NO(199) | 5) +#define MT2712_PIN_199_TDMO1_DATA__FUNC_I2SO3_WS (MTK_PIN_NO(199) | 6) + +#define MT2712_PIN_200_TDMO0_MCLK__FUNC_GPIO200 (MTK_PIN_NO(200) | 0) +#define MT2712_PIN_200_TDMO0_MCLK__FUNC_TDMO0_MCLK0 (MTK_PIN_NO(200) | 1) +#define MT2712_PIN_200_TDMO0_MCLK__FUNC_TDMO1_MCLK0 (MTK_PIN_NO(200) | 2) +#define MT2712_PIN_200_TDMO0_MCLK__FUNC_PCM1_DI (MTK_PIN_NO(200) | 3) +#define MT2712_PIN_200_TDMO0_MCLK__FUNC_TDMO0_MCLK1 (MTK_PIN_NO(200) | 4) +#define MT2712_PIN_200_TDMO0_MCLK__FUNC_TDMO1_MCLK1 (MTK_PIN_NO(200) | 5) +#define MT2712_PIN_200_TDMO0_MCLK__FUNC_MRG_TX (MTK_PIN_NO(200) | 6) +#define MT2712_PIN_200_TDMO0_MCLK__FUNC_I2SO2_MCK (MTK_PIN_NO(200) | 7) + +#define MT2712_PIN_201_TDMO0_LRCK__FUNC_GPIO201 (MTK_PIN_NO(201) | 0) +#define MT2712_PIN_201_TDMO0_LRCK__FUNC_TDMO0_LRCK0 (MTK_PIN_NO(201) | 1) +#define MT2712_PIN_201_TDMO0_LRCK__FUNC_TDMO1_LRCK0 (MTK_PIN_NO(201) | 2) +#define MT2712_PIN_201_TDMO0_LRCK__FUNC_PCM1_SYNC (MTK_PIN_NO(201) | 3) +#define MT2712_PIN_201_TDMO0_LRCK__FUNC_TDMO0_LRCK1 (MTK_PIN_NO(201) | 4) +#define MT2712_PIN_201_TDMO0_LRCK__FUNC_TDMO1_LRCK1 (MTK_PIN_NO(201) | 5) +#define MT2712_PIN_201_TDMO0_LRCK__FUNC_MRG_RX (MTK_PIN_NO(201) | 6) +#define MT2712_PIN_201_TDMO0_LRCK__FUNC_I2SO2_WS (MTK_PIN_NO(201) | 7) + +#define MT2712_PIN_202_TDMO0_BCK__FUNC_GPIO202 (MTK_PIN_NO(202) | 0) +#define MT2712_PIN_202_TDMO0_BCK__FUNC_TDMO0_BCK0 (MTK_PIN_NO(202) | 1) +#define MT2712_PIN_202_TDMO0_BCK__FUNC_TDMO1_BCK0 (MTK_PIN_NO(202) | 2) +#define MT2712_PIN_202_TDMO0_BCK__FUNC_PCM1_CLK (MTK_PIN_NO(202) | 3) +#define MT2712_PIN_202_TDMO0_BCK__FUNC_TDMO0_BCK1 (MTK_PIN_NO(202) | 4) +#define MT2712_PIN_202_TDMO0_BCK__FUNC_TDMO1_BCK1 (MTK_PIN_NO(202) | 5) +#define MT2712_PIN_202_TDMO0_BCK__FUNC_MRG_SYNC (MTK_PIN_NO(202) | 6) +#define MT2712_PIN_202_TDMO0_BCK__FUNC_I2SO2_BCK (MTK_PIN_NO(202) | 7) + +#define MT2712_PIN_203_TDMO0_DATA__FUNC_GPIO203 (MTK_PIN_NO(203) | 0) +#define MT2712_PIN_203_TDMO0_DATA__FUNC_TDMO0_DATA0 (MTK_PIN_NO(203) | 1) +#define MT2712_PIN_203_TDMO0_DATA__FUNC_TDMO1_DATA0 (MTK_PIN_NO(203) | 2) +#define MT2712_PIN_203_TDMO0_DATA__FUNC_PCM1_DO (MTK_PIN_NO(203) | 3) +#define MT2712_PIN_203_TDMO0_DATA__FUNC_TDMO0_DATA1 (MTK_PIN_NO(203) | 4) +#define MT2712_PIN_203_TDMO0_DATA__FUNC_TDMO1_DATA1 (MTK_PIN_NO(203) | 5) +#define MT2712_PIN_203_TDMO0_DATA__FUNC_MRG_CLK (MTK_PIN_NO(203) | 6) +#define MT2712_PIN_203_TDMO0_DATA__FUNC_I2SO2_DO (MTK_PIN_NO(203) | 7) + +#define MT2712_PIN_204_PERSTB_P0__FUNC_GPIO204 (MTK_PIN_NO(204) | 0) +#define MT2712_PIN_204_PERSTB_P0__FUNC_PERST_B_P0 (MTK_PIN_NO(204) | 1) + +#define MT2712_PIN_205_CLKREQN_P0__FUNC_GPIO205 (MTK_PIN_NO(205) | 0) +#define MT2712_PIN_205_CLKREQN_P0__FUNC_CLKREQ_N_P0 (MTK_PIN_NO(205) | 1) + +#define MT2712_PIN_206_WAKEEN_P0__FUNC_GPIO206 (MTK_PIN_NO(206) | 0) +#define MT2712_PIN_206_WAKEEN_P0__FUNC_WAKE_EN_P0 (MTK_PIN_NO(206) | 1) + +#define MT2712_PIN_207_PERSTB_P1__FUNC_GPIO207 (MTK_PIN_NO(207) | 0) +#define MT2712_PIN_207_PERSTB_P1__FUNC_PERST_B_P1 (MTK_PIN_NO(207) | 1) + +#define MT2712_PIN_208_CLKREQN_P1__FUNC_GPIO208 (MTK_PIN_NO(208) | 0) +#define MT2712_PIN_208_CLKREQN_P1__FUNC_CLKREQ_N_P1 (MTK_PIN_NO(208) | 1) + +#define MT2712_PIN_209_WAKEEN_P1__FUNC_GPIO209 (MTK_PIN_NO(209) | 0) +#define MT2712_PIN_209_WAKEEN_P1__FUNC_WAKE_EN_P1 (MTK_PIN_NO(209) | 1) + +#endif /* __DTS_MT2712_PINFUNC_H */ diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi index 9d88f41aefa0..6d8532af8346 100644 --- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/mt2712-power.h> +#include "mt2712-pinfunc.h" / { compatible = "mediatek,mt2712"; @@ -199,6 +200,34 @@ clock-output-names = "clkaud_ext_i_2"; }; + clki2si0_mck_i: oscillator@6 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <30000000>; + clock-output-names = "clki2si0_mck_i"; + }; + + clki2si1_mck_i: oscillator@7 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <30000000>; + clock-output-names = "clki2si1_mck_i"; + }; + + clki2si2_mck_i: oscillator@8 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <30000000>; + clock-output-names = "clki2si2_mck_i"; + }; + + clktdmin_mclk_i: oscillator@9 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <30000000>; + clock-output-names = "clktdmin_mclk_i"; + }; + timer { compatible = "arm,armv8-timer"; interrupt-parent = <&gic>; @@ -230,6 +259,23 @@ #clock-cells = <1>; }; + syscfg_pctl_a: syscfg_pctl_a@10005000 { + compatible = "mediatek,mt2712-pctl-a-syscfg", "syscon"; + reg = <0 0x10005000 0 0x1000>; + }; + + pio: pinctrl@10005000 { + compatible = "mediatek,mt2712-pinctrl"; + reg = <0 0x1000b000 0 0x1000>; + mediatek,pctl-regmap = <&syscfg_pctl_a>; + pins-are-numbered; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + }; + scpsys: scpsys@10006000 { compatible = "mediatek,mt2712-scpsys", "syscon"; #power-domain-cells = <1>; diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts index 45d8655ee423..b7837642c33a 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts @@ -18,7 +18,7 @@ compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622"; chosen { - bootargs = "console=ttyS0,115200n1"; + bootargs = "console=ttyS0,115200n1 swiotlb=512"; }; cpus { @@ -163,10 +163,17 @@ i2s1_pins: i2s1-pins { mux { function = "i2s"; - groups = "i2s_out_bclk_ws_mclk", + groups = "i2s_out_mclk_bclk_ws", "i2s1_in_data", "i2s1_out_data"; }; + + conf { + pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK", + "I2S_WS", "I2S_MCLK"; + drive-strength = <12>; + bias-pull-down; + }; }; irrx_pins: irrx-pins { diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index e9d5130df8d1..9213c966c224 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -527,6 +527,95 @@ status = "disabled"; }; + audsys: clock-controller@11220000 { + compatible = "mediatek,mt7622-audsys", "syscon"; + reg = <0 0x11220000 0 0x2000>; + #clock-cells = <1>; + + afe: audio-controller { + compatible = "mediatek,mt7622-audio"; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "afe", "asys"; + + clocks = <&infracfg CLK_INFRA_AUDIO_PD>, + <&topckgen CLK_TOP_AUD1_SEL>, + <&topckgen CLK_TOP_AUD2_SEL>, + <&topckgen CLK_TOP_A1SYS_HP_DIV_PD>, + <&topckgen CLK_TOP_A2SYS_HP_DIV_PD>, + <&topckgen CLK_TOP_I2S0_MCK_SEL>, + <&topckgen CLK_TOP_I2S1_MCK_SEL>, + <&topckgen CLK_TOP_I2S2_MCK_SEL>, + <&topckgen CLK_TOP_I2S3_MCK_SEL>, + <&topckgen CLK_TOP_I2S0_MCK_DIV>, + <&topckgen CLK_TOP_I2S1_MCK_DIV>, + <&topckgen CLK_TOP_I2S2_MCK_DIV>, + <&topckgen CLK_TOP_I2S3_MCK_DIV>, + <&topckgen CLK_TOP_I2S0_MCK_DIV_PD>, + <&topckgen CLK_TOP_I2S1_MCK_DIV_PD>, + <&topckgen CLK_TOP_I2S2_MCK_DIV_PD>, + <&topckgen CLK_TOP_I2S3_MCK_DIV_PD>, + <&audsys CLK_AUDIO_I2SO1>, + <&audsys CLK_AUDIO_I2SO2>, + <&audsys CLK_AUDIO_I2SO3>, + <&audsys CLK_AUDIO_I2SO4>, + <&audsys CLK_AUDIO_I2SIN1>, + <&audsys CLK_AUDIO_I2SIN2>, + <&audsys CLK_AUDIO_I2SIN3>, + <&audsys CLK_AUDIO_I2SIN4>, + <&audsys CLK_AUDIO_ASRCO1>, + <&audsys CLK_AUDIO_ASRCO2>, + <&audsys CLK_AUDIO_ASRCO3>, + <&audsys CLK_AUDIO_ASRCO4>, + <&audsys CLK_AUDIO_AFE>, + <&audsys CLK_AUDIO_AFE_CONN>, + <&audsys CLK_AUDIO_A1SYS>, + <&audsys CLK_AUDIO_A2SYS>; + + clock-names = "infra_sys_audio_clk", + "top_audio_mux1_sel", + "top_audio_mux2_sel", + "top_audio_a1sys_hp", + "top_audio_a2sys_hp", + "i2s0_src_sel", + "i2s1_src_sel", + "i2s2_src_sel", + "i2s3_src_sel", + "i2s0_src_div", + "i2s1_src_div", + "i2s2_src_div", + "i2s3_src_div", + "i2s0_mclk_en", + "i2s1_mclk_en", + "i2s2_mclk_en", + "i2s3_mclk_en", + "i2so0_hop_ck", + "i2so1_hop_ck", + "i2so2_hop_ck", + "i2so3_hop_ck", + "i2si0_hop_ck", + "i2si1_hop_ck", + "i2si2_hop_ck", + "i2si3_hop_ck", + "asrc0_out_ck", + "asrc1_out_ck", + "asrc2_out_ck", + "asrc3_out_ck", + "audio_afe_pd", + "audio_afe_conn_pd", + "audio_a1sys_pd", + "audio_a2sys_pd"; + + assigned-clocks = <&topckgen CLK_TOP_A1SYS_HP_SEL>, + <&topckgen CLK_TOP_A2SYS_HP_SEL>, + <&topckgen CLK_TOP_A1SYS_HP_DIV>, + <&topckgen CLK_TOP_A2SYS_HP_DIV>; + assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL>, + <&topckgen CLK_TOP_AUD2PLL>; + assigned-clock-rates = <0>, <0>, <49152000>, <45158400>; + }; + }; + mmc0: mmc@11230000 { compatible = "mediatek,mt7622-mmc"; reg = <0 0x11230000 0 0x1000>; @@ -735,6 +824,16 @@ #reset-cells = <1>; }; + hsdma: dma-controller@1b007000 { + compatible = "mediatek,mt7622-hsdma"; + reg = <0 0x1b007000 0 0x1000>; + interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_LOW>; + clocks = <ðsys CLK_ETH_HSDMA_EN>; + clock-names = "hsdma"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>; + #dma-cells = <1>; + }; + eth: ethernet@1b100000 { compatible = "mediatek,mt7622-eth", "mediatek,mt2701-eth", diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 55ec5ee7f7e8..9319e74b8906 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -6,3 +6,4 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi index 6167af955659..a6ad3d7fe655 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi @@ -4,7 +4,7 @@ &pm8994_gpios { pinctrl-names = "default"; - pinctrl-0 = <&ls_exp_gpio_f>; + pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>; ls_exp_gpio_f: pm8994_gpio5 { pinconf { diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index 4b8bb026346e..0f829db33efe 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -117,6 +117,16 @@ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; cd-gpios = <&msmgpio 38 0x1>; + vmmc-supply = <&pm8994_l21>; + vqmmc-supply = <&pm8994_l13>; + status = "okay"; + }; + + phy@627000 { + status = "okay"; + }; + + ufshc@624000 { status = "okay"; }; @@ -169,19 +179,6 @@ pinctrl-0 = <&usb2_vbus_det_gpio>; }; - bt_en: bt-en-1-8v { - pinctrl-names = "default"; - pinctrl-0 = <&bt_en_gpios>; - compatible = "regulator-fixed"; - regulator-name = "bt-en-regulator"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - /* WLAN card specific delay */ - startup-delay-us = <70000>; - enable-active-high; - }; - wlan_en: wlan-en-1-8v { pinctrl-names = "default"; pinctrl-0 = <&wlan_en_gpios>; @@ -198,19 +195,18 @@ }; agnoc@0 { - qcom,pcie@600000 { + pcie@600000 { status = "okay"; perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>; - vddpe-supply = <&wlan_en>; - vddpe1-supply = <&bt_en>; + vddpe-3v3-supply = <&wlan_en>; }; - qcom,pcie@608000 { + pcie@608000 { status = "okay"; perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>; }; - qcom,pcie@610000 { + pcie@610000 { status = "okay"; perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts index 6a838b5d321e..c13ddee8262b 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts @@ -21,6 +21,7 @@ aliases { serial0 = &blsp1_uart5; + serial1 = &blsp1_uart3; }; chosen { @@ -33,20 +34,61 @@ }; soc { - pinctrl@1000000 { - serial_4_pins: serial4_pinmux { - mux { - pins = "gpio23", "gpio24"; - function = "blsp4_uart1"; - bias-disable; - }; + serial@78b3000 { + status = "ok"; + }; + + spi@78b5000 { + status = "ok"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; }; }; - serial@78b3000 { - pinctrl-0 = <&serial_4_pins>; - pinctrl-names = "default"; + serial@78b1000 { + status = "ok"; + }; + + i2c@78b6000 { + status = "ok"; + }; + + dma@7984000 { + status = "ok"; + }; + + nand@79b0000 { + status = "ok"; + + nand@0 { + reg = <0>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + }; + }; + + phy@86000 { + status = "ok"; + }; + + phy@8e000 { + status = "ok"; + }; + + pci@20000000 { + status = "ok"; + perst-gpio = <&tlmm 58 0x1>; + }; + + pci@10000000 { status = "ok"; + perst-gpio = <&tlmm 61 0x1>; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 2bc5dec5614d..18226980f7c3 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -24,7 +24,7 @@ ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; - pinctrl@1000000 { + tlmm: pinctrl@1000000 { compatible = "qcom,ipq8074-pinctrl"; reg = <0x1000000 0x300000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; @@ -32,6 +32,45 @@ #gpio-cells = <0x2>; interrupt-controller; #interrupt-cells = <0x2>; + + serial_4_pins: serial4-pinmux { + pins = "gpio23", "gpio24"; + function = "blsp4_uart1"; + drive-strength = <8>; + bias-disable; + }; + + i2c_0_pins: i2c-0-pinmux { + pins = "gpio42", "gpio43"; + function = "blsp1_i2c"; + drive-strength = <8>; + bias-disable; + }; + + spi_0_pins: spi-0-pins { + pins = "gpio38", "gpio39", "gpio40", "gpio41"; + function = "blsp0_spi"; + drive-strength = <8>; + bias-disable; + }; + + hsuart_pins: hsuart-pins { + pins = "gpio46", "gpio47", "gpio48", "gpio49"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-disable; + }; + + qpic_pins: qpic-pins { + pins = "gpio1", "gpio3", "gpio4", + "gpio5", "gpio6", "gpio7", + "gpio8", "gpio10", "gpio11", + "gpio12", "gpio13", "gpio14", + "gpio15", "gpio16", "gpio17"; + function = "qpic"; + drive-strength = <8>; + bias-disable; + }; }; intc: interrupt-controller@b000000 { @@ -122,6 +161,276 @@ clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + pinctrl-0 = <&serial_4_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + + blsp_dma: dma@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x7884000 0x2b000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp1_uart1: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78af000 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_uart3: serial@78b1000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78b1000 0x200>; + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 4>, + <&blsp_dma 5>; + dma-names = "tx", "rx"; + pinctrl-0 = <&hsuart_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + + blsp1_spi1: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x78b5000 0x600>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <50000000>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 12>, <&blsp_dma 13>; + dma-names = "tx", "rx"; + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + + blsp1_i2c2: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x78b6000 0x600>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + dmas = <&blsp_dma 15>, <&blsp_dma 14>; + dma-names = "rx", "tx"; + pinctrl-0 = <&i2c_0_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + + blsp1_i2c3: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x78b7000 0x600>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <100000>; + dmas = <&blsp_dma 17>, <&blsp_dma 16>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + qpic_bam: dma@7984000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x7984000 0x1a000>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + status = "disabled"; + }; + + qpic_nand: nand@79b0000 { + compatible = "qcom,ipq8074-nand"; + reg = <0x79b0000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&gcc GCC_QPIC_CLK>, + <&gcc GCC_QPIC_AHB_CLK>; + clock-names = "core", "aon"; + + dmas = <&qpic_bam 0>, + <&qpic_bam 1>, + <&qpic_bam 2>; + dma-names = "tx", "rx", "cmd"; + pinctrl-0 = <&qpic_pins>; + pinctrl-names = "default"; + status = "disabled"; + }; + + pcie_phy0: phy@86000 { + compatible = "qcom,ipq8074-qmp-pcie-phy"; + reg = <0x86000 0x1000>; + #phy-cells = <0>; + clocks = <&gcc GCC_PCIE0_PIPE_CLK>; + clock-names = "pipe_clk"; + clock-output-names = "pcie20_phy0_pipe_clk"; + + resets = <&gcc GCC_PCIE0_PHY_BCR>, + <&gcc GCC_PCIE0PHY_PHY_BCR>; + reset-names = "phy", + "common"; + status = "disabled"; + }; + + pcie0: pci@20000000 { + compatible = "qcom,pcie-ipq8074"; + reg = <0x20000000 0xf1d + 0x20000f20 0xa8 + 0x80000 0x2000 + 0x20100000 0x1000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + phys = <&pcie_phy0>; + phy-names = "pciephy"; + + ranges = <0x81000000 0 0x20200000 0x20200000 + 0 0x100000 /* downstream I/O */ + 0x82000000 0 0x20300000 0x20300000 + 0 0xd00000>; /* non-prefetchable memory */ + + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 75 + IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 78 + IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 79 + IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 83 + IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, + <&gcc GCC_PCIE0_AXI_M_CLK>, + <&gcc GCC_PCIE0_AXI_S_CLK>, + <&gcc GCC_PCIE0_AHB_CLK>, + <&gcc GCC_PCIE0_AUX_CLK>; + + clock-names = "iface", + "axi_m", + "axi_s", + "ahb", + "aux"; + resets = <&gcc GCC_PCIE0_PIPE_ARES>, + <&gcc GCC_PCIE0_SLEEP_ARES>, + <&gcc GCC_PCIE0_CORE_STICKY_ARES>, + <&gcc GCC_PCIE0_AXI_MASTER_ARES>, + <&gcc GCC_PCIE0_AXI_SLAVE_ARES>, + <&gcc GCC_PCIE0_AHB_ARES>, + <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>; + reset-names = "pipe", + "sleep", + "sticky", + "axi_m", + "axi_s", + "ahb", + "axi_m_sticky"; + status = "disabled"; + }; + + pcie_phy1: phy@8e000 { + compatible = "qcom,ipq8074-qmp-pcie-phy"; + reg = <0x8e000 0x1000>; + #phy-cells = <0>; + clocks = <&gcc GCC_PCIE1_PIPE_CLK>; + clock-names = "pipe_clk"; + clock-output-names = "pcie20_phy1_pipe_clk"; + + resets = <&gcc GCC_PCIE1_PHY_BCR>, + <&gcc GCC_PCIE1PHY_PHY_BCR>; + reset-names = "phy", + "common"; + status = "disabled"; + }; + + pcie1: pci@10000000 { + compatible = "qcom,pcie-ipq8074"; + reg = <0x10000000 0xf1d + 0x10000f20 0xa8 + 0x88000 0x2000 + 0x10100000 0x1000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + phys = <&pcie_phy1>; + phy-names = "pciephy"; + + ranges = <0x81000000 0 0x10200000 0x10200000 + 0 0x100000 /* downstream I/O */ + 0x82000000 0 0x10300000 0x10300000 + 0 0xd00000>; /* non-prefetchable memory */ + + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 142 + IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 143 + IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 144 + IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 145 + IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>, + <&gcc GCC_PCIE1_AXI_M_CLK>, + <&gcc GCC_PCIE1_AXI_S_CLK>, + <&gcc GCC_PCIE1_AHB_CLK>, + <&gcc GCC_PCIE1_AUX_CLK>; + clock-names = "iface", + "axi_m", + "axi_s", + "ahb", + "aux"; + resets = <&gcc GCC_PCIE1_PIPE_ARES>, + <&gcc GCC_PCIE1_SLEEP_ARES>, + <&gcc GCC_PCIE1_CORE_STICKY_ARES>, + <&gcc GCC_PCIE1_AXI_MASTER_ARES>, + <&gcc GCC_PCIE1_AXI_SLAVE_ARES>, + <&gcc GCC_PCIE1_AHB_ARES>, + <&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>; + reset-names = "pipe", + "sleep", + "sticky", + "axi_m", + "axi_s", + "ahb", + "axi_m_sticky"; status = "disabled"; }; }; @@ -175,7 +484,7 @@ pmu { compatible = "arm,armv8-pmuv3"; - interrupts = <GIC_PPI 7 GIC_CPU_MASK_SIMPLE(4)>; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; clocks { diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 66b318e1de80..650f356f69ca 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -179,7 +179,7 @@ pmu { compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_PPI 7 GIC_CPU_MASK_SIMPLE(4)>; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>; }; thermal-zones { @@ -512,7 +512,7 @@ blsp_i2c2: i2c@78b6000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b6000 0x500>; - interrupts = <GIC_SPI 96 0>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_AHB_CLK>, <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; clock-names = "iface", "core"; @@ -527,7 +527,7 @@ blsp_i2c4: i2c@78b8000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b8000 0x500>; - interrupts = <GIC_SPI 98 0>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_AHB_CLK>, <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; clock-names = "iface", "core"; @@ -542,7 +542,7 @@ blsp_i2c6: i2c@78ba000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078ba000 0x500>; - interrupts = <GIC_SPI 100 0>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_AHB_CLK>, <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; clock-names = "iface", "core"; @@ -574,7 +574,7 @@ "mi2s-bit-clk3"; #sound-dai-cells = <1>; - interrupts = <0 160 0>; + interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "lpass-irq-lpaif"; reg = <0x07708000 0x10000>; reg-names = "lpass-lpaif"; @@ -594,7 +594,7 @@ reg = <0x07824900 0x11c>, <0x07824000 0x800>; reg-names = "hc_mem", "core_mem"; - interrupts = <0 123 0>, <0 138 0>; + interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>, <0 138 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>, @@ -611,7 +611,7 @@ reg = <0x07864900 0x11c>, <0x07864000 0x800>; reg-names = "hc_mem", "core_mem"; - interrupts = <0 125 0>, <0 221 0>; + interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>, <0 221 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>, @@ -818,7 +818,7 @@ iommu-ctx@2000 { compatible = "qcom,msm-iommu-v1-ns"; reg = <0x2000 0x1000>; - interrupts = <GIC_SPI 242 0>; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -862,7 +862,7 @@ "bus_clk", "vsync_clk"; - interrupts = <0 72 0>; + interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts index 454213391671..8c69516f97ed 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts @@ -38,4 +38,21 @@ pinctrl-1 = <&blsp1_uart2_sleep>; }; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops@1ff00000 { + compatible = "ramoops"; + reg = <0x0 0x1ff00000 0x0 0x40000>; + console-size = <0x10000>; + record-size = <0x10000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + }; + }; }; + +#include "msm8994-smd-rpm.dtsi" diff --git a/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi index d2a26f0f8d73..31bc9d98e31f 100644 --- a/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi @@ -35,4 +35,64 @@ bias-pull-down; }; }; + + /* 0-3 for sdc1 4-6 for sdc2 */ + /* Order of pins */ + /* SDC1: CLK -> 0, CMD -> 1, DATA -> 2, RCLK -> 3 */ + /* SDC2: CLK -> 4, CMD -> 5, DATA -> 6 */ + sdc1_clk_on: clk-on { + pinconf { + pins = "sdc1_clk"; + bias-disable = <0>; /* No pull */ + drive-strength = <16>; /* 16mA */ + }; + }; + + sdc1_clk_off: clk-off { + pinconf { + pins = "sdc1_clk"; + bias-disable = <0>; /* No pull */ + drive-strength = <2>; /* 2mA */ + }; + }; + + sdc1_cmd_on: cmd-on { + pinconf { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <8>; + }; + }; + + sdc1_cmd_off: cmd-off { + pinconf { + pins = "sdc1_cmd"; + bias-pull-up = <0x3>; /* same as 3.10 ?? */ + drive-strength = <2>; /* 2mA */ + }; + }; + + sdc1_data_on: data-on { + pinconf { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <8>; /* 8mA */ + }; + }; + + sdc1_data_off: data-off { + pinconf { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc1_rclk_on: rclk-on { + bias-pull-down; /* pull down */ + }; + + sdc1_rclk_off: rclk-off { + bias-pull-down; /* pull down */ + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi index 171578747ed0..cf5cacdd624d 100644 --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -202,6 +202,31 @@ reg = <0xfc400000 0x2000>; }; + sdhci1: mmc@f9824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>, + <GIC_SPI 138 IRQ_TYPE_NONE>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&clock_gcc GCC_SDCC1_APPS_CLK>, + <&clock_gcc GCC_SDCC1_AHB_CLK>; + clock-names = "core", "iface"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on + &sdc1_rclk_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off + &sdc1_rclk_off>; + + regulator-always-on; + bus-width = <8>; + mmc-hs400-1_8v; + status = "okay"; + }; + rpm_msg_ram: memory@fc428000 { compatible = "qcom,rpm-msg-ram"; reg = <0xfc428000 0x4000>; @@ -231,7 +256,67 @@ }; }; + smd_rpm: smd { + compatible = "qcom,smd"; + rpm { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + qcom,local-pid = <0>; + qcom,remote-pid = <6>; + + rpm-requests { + compatible = "qcom,rpm-msm8994"; + qcom,smd-channels = "rpm_requests"; + + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + pm8994_s1: s1 {}; + pm8994_s2: s2 {}; + pm8994_s3: s3 {}; + pm8994_s4: s4 {}; + pm8994_s5: s5 {}; + pm8994_s6: s6 {}; + pm8994_s7: s7 {}; + + pm8994_l1: l1 {}; + pm8994_l2: l2 {}; + pm8994_l3: l3 {}; + pm8994_l4: l4 {}; + pm8994_l6: l6 {}; + pm8994_l8: l8 {}; + pm8994_l9: l9 {}; + pm8994_l10: l10 {}; + pm8994_l11: l11 {}; + pm8994_l12: l12 {}; + pm8994_l13: l13 {}; + pm8994_l14: l14 {}; + pm8994_l15: l15 {}; + pm8994_l16: l16 {}; + pm8994_l17: l17 {}; + pm8994_l18: l18 {}; + pm8994_l19: l19 {}; + pm8994_l20: l20 {}; + pm8994_l21: l21 {}; + pm8994_l22: l22 {}; + pm8994_l23: l23 {}; + pm8994_l24: l24 {}; + pm8994_l25: l25 {}; + pm8994_l26: l26 {}; + pm8994_l27: l27 {}; + pm8994_l28: l28 {}; + pm8994_l29: l29 {}; + pm8994_l30: l30 {}; + pm8994_l31: l31 {}; + pm8994_l32: l32 {}; + + pm8994_lvs1: lvs1 {}; + pm8994_lvs2: lvs2 {}; + }; + }; + }; + }; }; - #include "msm8992-pins.dtsi" diff --git a/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi b/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi new file mode 100644 index 000000000000..47ebd16cb680 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi @@ -0,0 +1,276 @@ +/* Copyright (c) 2015, LGE Inc. All rights reserved. + * Copyright (c) 2016, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +&smd_rpm { + rpm { + rpm_requests { + pm8994-regulators { + + vdd_l1-supply = <&pm8994_s1>; + vdd_l2_26_28-supply = <&pm8994_s3>; + vdd_l3_11-supply = <&pm8994_s3>; + vdd_l4_27_31-supply = <&pm8994_s3>; + vdd_l5_7-supply = <&pm8994_s3>; + vdd_l6_12_32-supply = <&pm8994_s5>; + vdd_l8_16_30-supply = <&vreg_vph_pwr>; + vdd_l9_10_18_22-supply = <&vreg_vph_pwr>; + vdd_l13_19_23_24-supply = <&vreg_vph_pwr>; + vdd_l14_15-supply = <&pm8994_s5>; + vdd_l17_29-supply = <&vreg_vph_pwr>; + vdd_l20_21-supply = <&vreg_vph_pwr>; + vdd_l25-supply = <&pm8994_s5>; + vdd_lvs1_2 = <&pm8994_s4>; + + s1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + s2 { + /* TODO */ + }; + + s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-system-load = <325000>; + }; + + s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + s7 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + l2 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + + l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l5 { + /* TODO */ + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + /* TODO */ + }; + + l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + }; + + l11 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + qcom,init-voltage = <1200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + proxy-supply = <&pm8994_l12>; + qcom,proxy-consumer-enable; + qcom,proxy-consumer-current = <10000>; + status = "okay"; + }; + + l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + qcom,init-voltage = <2950000>; + status = "okay"; + }; + + l14 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + qcom,init-voltage = <1200000>; + proxy-supply = <&pm8994_l14>; + qcom,proxy-consumer-enable; + qcom,proxy-consumer-current = <10000>; + status = "okay"; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + status = "okay"; + }; + + l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + qcom,init-voltage = <2700000>; + status = "okay"; + }; + + l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + qcom,init-voltage = <2700000>; + status = "okay"; + }; + + l18 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + qcom,init-voltage = <3000000>; + qcom,init-ldo-mode = <1>; + }; + + l19 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + status = "okay"; + }; + + l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-boot-on; + regulator-allow-set-load; + regulator-system-load = <570000>; + }; + + l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + qcom,init-voltage = <1800000>; + }; + + l22 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + qcom,init-voltage = <3100000>; + }; + + l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + qcom,init-voltage = <2800000>; + }; + + l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3150000>; + qcom,init-voltage = <3075000>; + }; + + l25 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + }; + + l26 { + /* TODO: value from downstream + regulator-min-microvolt = <987500>; + fails to apply */ + }; + + l27 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + qcom,init-voltage = <1050000>; + }; + + l28 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + qcom,init-voltage = <1000000>; + proxy-supply = <&pm8994_l28>; + qcom,proxy-consumer-enable; + qcom,proxy-consumer-current = <10000>; + }; + + l29 { + /* TODO: Unsupported voltage range. + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + qcom,init-voltage = <2800000>; + */ + }; + + l30 { + /* TODO: get this verified + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + */ + }; + + l31 { + regulator-min-microvolt = <1262500>; + regulator-max-microvolt = <1262500>; + qcom,init-voltage = <1262500>; + }; + + l32 { + /* TODO: get this verified + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + */ + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index f8e49d0b4681..8c7f9ca25b53 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -447,7 +447,7 @@ blsp2_i2c0: i2c@75b5000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x075b5000 0x1000>; - interrupts = <GIC_SPI 101 0>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP2_AHB_CLK>, <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; clock-names = "iface", "core"; @@ -478,7 +478,7 @@ blsp2_i2c1: i2c@75b6000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x075b6000 0x1000>; - interrupts = <GIC_SPI 102 0>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP2_AHB_CLK>, <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>; clock-names = "iface", "core"; @@ -503,7 +503,7 @@ blsp1_i2c2: i2c@7577000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x07577000 0x1000>; - interrupts = <GIC_SPI 97 0>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_AHB_CLK>, <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; clock-names = "iface", "core"; @@ -536,7 +536,8 @@ reg = <0x74a4900 0x314>, <0x74a4000 0x800>; reg-names = "hc_mem", "core_mem"; - interrupts = <0 125 0>, <0 221 0>; + interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>, + <0 221 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clock-names = "iface", "core", "xo"; @@ -633,6 +634,91 @@ #interrupt-cells = <4>; }; + ufsphy: phy@627000 { + compatible = "qcom,msm8996-ufs-phy-qmp-14nm"; + reg = <0x627000 0xda8>; + reg-names = "phy_mem"; + #phy-cells = <0>; + + vdda-phy-supply = <&pm8994_l28>; + vdda-pll-supply = <&pm8994_l12>; + + vdda-phy-max-microamp = <18380>; + vdda-pll-max-microamp = <9440>; + + vddp-ref-clk-supply = <&pm8994_l25>; + vddp-ref-clk-max-microamp = <100>; + vddp-ref-clk-always-on; + + clock-names = "ref_clk_src", "ref_clk"; + clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, + <&gcc GCC_UFS_CLKREF_CLK>; + status = "disabled"; + }; + + ufshc@624000 { + compatible = "qcom,ufshc"; + reg = <0x624000 0x2500>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + + phys = <&ufsphy>; + phy-names = "ufsphy"; + + vcc-supply = <&pm8994_l20>; + vccq-supply = <&pm8994_l25>; + vccq2-supply = <&pm8994_s4>; + + vcc-max-microamp = <600000>; + vccq-max-microamp = <450000>; + vccq2-max-microamp = <450000>; + + power-domains = <&gcc UFS_GDSC>; + + clock-names = + "core_clk_src", + "core_clk", + "bus_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro_src", + "core_clk_unipro", + "core_clk_ice", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk"; + clocks = + <&gcc UFS_AXI_CLK_SRC>, + <&gcc GCC_UFS_AXI_CLK>, + <&gcc GCC_SYS_NOC_UFS_AXI_CLK>, + <&gcc GCC_AGGRE2_UFS_AXI_CLK>, + <&gcc GCC_UFS_AHB_CLK>, + <&gcc UFS_ICE_CORE_CLK_SRC>, + <&gcc GCC_UFS_UNIPRO_CORE_CLK>, + <&gcc GCC_UFS_ICE_CORE_CLK>, + <&rpmcc RPM_SMD_LN_BB_CLK>, + <&gcc GCC_UFS_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_RX_SYMBOL_0_CLK>; + freq-table-hz = + <100000000 200000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>, + <150000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + + lanes-per-direction = <1>; + status = "disabled"; + + ufs_variant { + compatible = "qcom,ufs_variant"; + }; + }; + mmcc: clock-controller@8c0000 { compatible = "qcom,mmcc-msm8996"; #clock-cells = <1>; @@ -819,7 +905,7 @@ dwc3@7600000 { compatible = "snps,dwc3"; reg = <0x7600000 0xcc00>; - interrupts = <0 138 0>; + interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>; phys = <&hsusb_phy2>; phy-names = "usb2-phy"; }; @@ -848,7 +934,7 @@ dwc3@6a00000 { compatible = "snps,dwc3"; reg = <0x6a00000 0xcc00>; - interrupts = <0 131 0>; + interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; phys = <&hsusb_phy1>, <&ssusb_phy_0>; phy-names = "usb2-phy", "usb3-phy"; }; @@ -861,7 +947,7 @@ #size-cells = <1>; ranges; - pcie0: qcom,pcie@600000 { + pcie0: pcie@600000 { compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; status = "disabled"; power-domains = <&gcc PCIE0_GDSC>; @@ -882,7 +968,7 @@ ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>, <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>; - interrupts = <GIC_SPI 405 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; @@ -914,7 +1000,7 @@ }; - pcie1: qcom,pcie@608000 { + pcie1: pcie@608000 { compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; power-domains = <&gcc PCIE1_GDSC>; bus-range = <0x00 0xff>; @@ -937,7 +1023,7 @@ ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>, <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>; - interrupts = <GIC_SPI 413 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; @@ -967,7 +1053,7 @@ "bus_slave"; }; - pcie2: qcom,pcie@610000 { + pcie2: pcie@610000 { compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; power-domains = <&gcc PCIE2_GDSC>; bus-range = <0x00 0xff>; @@ -990,7 +1076,7 @@ device_type = "pci"; - interrupts = <GIC_SPI 421 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts new file mode 100644 index 000000000000..979ab49913f1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 MTP board device tree source + * + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "sdm845.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SDM845 MTP"; + compatible = "qcom,sdm845-mtp"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi new file mode 100644 index 000000000000..cdaabeb3c995 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -0,0 +1,327 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 SoC device tree source + * + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x80000000 0 0>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + memory@85fc0000 { + reg = <0 0x85fc0000 0 0x20000>; + no-map; + }; + + memory@85fe0000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x85fe0000 0x0 0x20000>; + no-map; + }; + + smem_mem: memory@86000000 { + reg = <0x0 0x86000000 0x0 0x200000>; + no-map; + }; + + memory@86200000 { + reg = <0 0x86200000 0 0x2d00000>; + no-map; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x400>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x500>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x600>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo385"; + reg = <0x0 0x700>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; + }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + }; + }; + + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_regs 0 0x1000>; + #hwlock-cells = <1>; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sdm845"; + reg = <0x100000 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + tcsr_mutex_regs: syscon@1f40000 { + compatible = "syscon"; + reg = <0x1f40000 0x40000>; + }; + + tlmm: pinctrl@3400000 { + compatible = "qcom,sdm845-pinctrl"; + reg = <0x03400000 0xc00000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0xc440000 0x1100>, + <0xc600000 0x2000000>, + <0xe600000 0x100000>, + <0xe700000 0xa0000>, + <0xc40a000 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + + apss_shared: mailbox@17990000 { + compatible = "qcom,sdm845-apss-shared"; + reg = <0x17990000 0x1000>; + #mbox-cells = <1>; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x17a00000 0x10000>, /* GICD */ + <0x17a60000 0x100000>; /* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + gic-its@17a40000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x17a40000 0x20000>; + status = "disabled"; + }; + }; + + timer@17c90000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x17c90000 0x1000>; + + frame@17ca0000 { + frame-number = <0>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17ca0000 0x1000>, + <0x17cb0000 0x1000>; + }; + + frame@17cc0000 { + frame-number = <1>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17cc0000 0x1000>; + status = "disabled"; + }; + + frame@17cd0000 { + frame-number = <2>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17cd0000 0x1000>; + status = "disabled"; + }; + + frame@17ce0000 { + frame-number = <3>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17ce0000 0x1000>; + status = "disabled"; + }; + + frame@17cf0000 { + frame-number = <4>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17cf0000 0x1000>; + status = "disabled"; + }; + + frame@17d00000 { + frame-number = <5>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17d00000 0x1000>; + status = "disabled"; + }; + + frame@17d10000 { + frame-number = <6>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x17d10000 0x1000>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index be2bfbc6b483..b8e9da15e00c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -595,6 +595,8 @@ reg = <0x0 0xff330200 0 0x100>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "h265e_mmu"; + clocks = <&cru ACLK_H265>, <&cru PCLK_H265>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; @@ -604,6 +606,8 @@ reg = <0x0 0xff340800 0x0 0x40>; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vepu_mmu"; + clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; @@ -613,6 +617,8 @@ reg = <0x0 0xff350800 0x0 0x40>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vpu_mmu"; + clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; @@ -622,6 +628,8 @@ reg = <0x0 0xff360480 0x0 0x40>, <0x0 0xff3604c0 0x0 0x40>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "rkvdec_mmu"; + clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; @@ -631,6 +639,8 @@ reg = <0x0 0xff373f00 0x0 0x100>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vop_mmu"; + clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index 03458ac44201..ad91ced78649 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -742,6 +742,8 @@ reg = <0x0 0xff900800 0x0 0x100>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "iep_mmu"; + clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; @@ -752,6 +754,8 @@ <0x0 0xff915000 0x0 0x100>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "isp_mmu"; + clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; rockchip,disable-mmu-reset; status = "disabled"; @@ -762,6 +766,8 @@ reg = <0x0 0xff930300 0x0 0x100>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vop_mmu"; + clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; @@ -772,6 +778,8 @@ <0x0 0xff9a0480 0x0 0x40>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hevc_mmu"; + clocks = <&cru ACLK_VIDEO>, <&cru HCLK_VIDEO>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; @@ -782,6 +790,8 @@ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vepu_mmu", "vdpu_mmu"; + clocks = <&cru ACLK_VIDEO>, <&cru HCLK_VIDEO>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts index 4f28628aa091..2a352763c848 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts @@ -662,6 +662,14 @@ status = "okay"; }; +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + &tsadc { /* tshut mode 0:CRU 1:GPIO */ rockchip,hw-tshut-mode = <1>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts index 191a6bcb1704..82179125bfb7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts @@ -255,7 +255,7 @@ ap_i2c_dig: &i2c2 { &ap_i2c_tp { trackpad@4a { - compatible = "atmel,atmel_mxt_tp"; + compatible = "atmel,maxtouch"; reg = <0x4a>; pinctrl-names = "default"; pinctrl-0 = <&trackpad_int_l>; @@ -271,7 +271,7 @@ ap_i2c_dig: &i2c2 { &ap_i2c_ts { touchscreen@4b { - compatible = "atmel,atmel_mxt_ts"; + compatible = "atmel,maxtouch"; reg = <0x4b>; pinctrl-names = "default"; pinctrl-0 = <&touch_int_l>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi index 18f546f2dfd1..f49bfab75dd0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -588,7 +588,9 @@ <&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>, <&cru PCLK_PERILP0>, <&cru ACLK_CCI>, <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>, - <&cru ACLK_VIO>; + <&cru ACLK_VIO>, <&cru ACLK_HDCP>, + <&cru ACLK_GIC_PRE>, + <&cru PCLK_DDR>; assigned-clock-rates = <600000000>, <800000000>, <1000000000>, @@ -597,7 +599,9 @@ <100000000>, <100000000>, <50000000>, <800000000>, <100000000>, <50000000>, - <400000000>; + <400000000>, <400000000>, + <200000000>, + <200000000>; }; &emmc_phy { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts index 7d3e8bfd51dd..e0afdd8b62bd 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts @@ -143,6 +143,11 @@ }; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c1 { status = "okay"; clock-frequency = <400000>; @@ -246,6 +251,10 @@ status = "okay"; }; +&tcphy0 { + status = "okay"; +}; + &u2phy0 { status = "okay"; }; @@ -281,3 +290,19 @@ &usb_host0_ohci { status = "okay"; }; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 4a2d06abe9c1..14a0f1998639 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -527,6 +527,10 @@ }; }; +&tcphy1 { + status = "okay"; +}; + &tsadc { rockchip,hw-tshut-mode = <1>; rockchip,hw-tshut-polarity = <1>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts index 56952d1a3fb8..ad7548d3b93d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts @@ -190,6 +190,18 @@ status = "okay"; }; +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreqn_cpm>; + status = "okay"; +}; + &pinctrl { sdio-pwrseq { wifi_enable_h: wifi-enable-h { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi index e5daed7d2026..941b627094d7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi @@ -471,21 +471,6 @@ gpio1830-supply = <&vcc_3v0>; }; -&pcie_phy { - status = "okay"; -}; - -&pcie0 { - assigned-clocks = <&cru SCLK_PCIEPHY_REF>; - assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>; - assigned-clock-rates = <100000000>; - ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>; - num-lanes = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_clkreqn_cpm>; - status = "okay"; -}; - &pmu_io_domains { pmu1830-supply = <&vcc_3v0>; status = "okay"; @@ -560,6 +545,14 @@ status = "okay"; }; +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + &tsadc { /* tshut mode 0:CRU 1:GPIO */ rockchip,hw-tshut-mode = <1>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 4550c0f82be9..e0040b648f43 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -312,6 +312,8 @@ reg = <0x0 0xfe320000 0x0 0x4000>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>; max-frequency = <150000000>; + assigned-clocks = <&cru HCLK_SD>; + assigned-clock-rates = <200000000>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; @@ -411,8 +413,8 @@ reg = <0x0 0xfe800000 0x0 0x100000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>; dr_mode = "otg"; - phys = <&u2phy0_otg>; - phy-names = "usb2-phy"; + phys = <&u2phy0_otg>, <&tcphy0_usb3>; + phy-names = "usb2-phy", "usb3-phy"; phy_type = "utmi_wide"; snps,dis_enblslpm_quirk; snps,dis-u2-freeclk-exists-quirk; @@ -444,8 +446,8 @@ reg = <0x0 0xfe900000 0x0 0x100000>; interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>; dr_mode = "otg"; - phys = <&u2phy1_otg>; - phy-names = "usb2-phy"; + phys = <&u2phy1_otg>, <&tcphy1_usb3>; + phy-names = "usb2-phy", "usb3-phy"; phy_type = "utmi_wide"; snps,dis_enblslpm_quirk; snps,dis-u2-freeclk-exists-quirk; @@ -461,8 +463,8 @@ compatible = "rockchip,rk3399-cdn-dp"; reg = <0x0 0xfec00000 0x0 0x100000>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>; - assigned-clocks = <&cru SCLK_DP_CORE>; - assigned-clock-rates = <100000000>; + assigned-clocks = <&cru SCLK_DP_CORE>, <&cru SCLK_SPDIF_REC_DPTX>; + assigned-clock-rates = <100000000>, <200000000>; clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>, <&cru SCLK_SPDIF_REC_DPTX>, <&cru PCLK_VIO_GRF>; clock-names = "core-clk", "pclk", "spdif", "grf"; @@ -1234,6 +1236,8 @@ reg = <0x0 0xff650800 0x0 0x40>; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "vpu_mmu"; + clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; @@ -1243,6 +1247,8 @@ reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>; interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "vdec_mmu"; + clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; @@ -1252,6 +1258,8 @@ reg = <0x0 0xff670800 0x0 0x40>; interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "iep_mmu"; + clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; status = "disabled"; }; @@ -1323,7 +1331,9 @@ <&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>, <&cru PCLK_PERILP0>, <&cru ACLK_CCI>, <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>, - <&cru ACLK_VIO>; + <&cru ACLK_VIO>, <&cru ACLK_HDCP>, + <&cru ACLK_GIC_PRE>, + <&cru PCLK_DDR>; assigned-clock-rates = <594000000>, <800000000>, <1000000000>, @@ -1332,7 +1342,9 @@ <100000000>, <100000000>, <50000000>, <600000000>, <100000000>, <50000000>, - <400000000>; + <400000000>, <400000000>, + <200000000>, + <200000000>; }; grf: syscon@ff770000 { @@ -1599,7 +1611,7 @@ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "vopl_mmu"; clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>; - clock-names = "aclk", "hclk"; + clock-names = "aclk", "iface"; power-domains = <&power RK3399_PD_VOPL>; #iommu-cells = <0>; status = "disabled"; @@ -1656,7 +1668,7 @@ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "vopb_mmu"; clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>; - clock-names = "aclk", "hclk"; + clock-names = "aclk", "iface"; power-domains = <&power RK3399_PD_VOPB>; #iommu-cells = <0>; status = "disabled"; @@ -1667,6 +1679,8 @@ reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "isp0_mmu"; + clocks = <&cru ACLK_ISP0_NOC>, <&cru HCLK_ISP0_NOC>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; rockchip,disable-mmu-reset; status = "disabled"; @@ -1677,6 +1691,8 @@ reg = <0x0 0xff924000 0x0 0x100>, <0x0 0xff925000 0x0 0x100>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "isp1_mmu"; + clocks = <&cru ACLK_ISP1_NOC>, <&cru HCLK_ISP1_NOC>; + clock-names = "aclk", "iface"; #iommu-cells = <0>; rockchip,disable-mmu-reset; status = "disabled"; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index c32dd3419c87..d63b56e944de 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -549,10 +549,13 @@ status = "disabled"; reg = <0x65000000 0x8500>; interrupts = <0 66 4>; + clock-names = "ether"; clocks = <&sys_clk 6>; + reset-names = "ether"; resets = <&sys_rst 6>; - phy-mode = "rmii"; + phy-mode = "internal"; local-mac-address = [00 00 00 00 00 00]; + socionext,syscon-phy-mode = <&soc_glue 0>; mdio: mdio { #address-cells = <1>; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index 3a5ed789c056..0298bd0d0e1a 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -604,10 +604,13 @@ interrupts = <0 66 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ether_rgmii>; + clock-names = "ether"; clocks = <&sys_clk 6>; + reset-names = "ether"; resets = <&sys_rst 6>; phy-mode = "rgmii"; local-mac-address = [00 00 00 00 00 00]; + socionext,syscon-phy-mode = <&soc_glue 0>; mdio: mdio { #address-cells = <1>; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi index e85d6ddea3c2..2a4cf427f5d3 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi @@ -341,7 +341,7 @@ cdns,phy-dll-delay-sdclk-hsmmc = <21>; }; - soc-glue@5f800000 { + soc_glue: soc-glue@5f800000 { compatible = "socionext,uniphier-pxs3-soc-glue", "simple-mfd", "syscon"; reg = <0x5f800000 0x2000>; @@ -412,10 +412,13 @@ interrupts = <0 66 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ether_rgmii>; + clock-names = "ether"; clocks = <&sys_clk 6>; + reset-names = "ether"; resets = <&sys_rst 6>; phy-mode = "rgmii"; local-mac-address = [00 00 00 00 00 00]; + socionext,syscon-phy-mode = <&soc_glue 0>; mdio0: mdio { #address-cells = <1>; @@ -430,10 +433,13 @@ interrupts = <0 67 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ether1_rgmii>; + clock-names = "ether"; clocks = <&sys_clk 7>; + reset-names = "ether"; resets = <&sys_rst 7>; phy-mode = "rgmii"; local-mac-address = [00 00 00 00 00 00]; + socionext,syscon-phy-mode = <&soc_glue 1>; mdio1: mdio { #address-cells = <1>; diff --git a/arch/arm64/boot/dts/sprd/sc2731.dtsi b/arch/arm64/boot/dts/sprd/sc2731.dtsi index 4331006185bf..98d3b4fdb9ad 100644 --- a/arch/arm64/boot/dts/sprd/sc2731.dtsi +++ b/arch/arm64/boot/dts/sprd/sc2731.dtsi @@ -24,6 +24,17 @@ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; }; + pmic_eic: gpio@300 { + compatible = "sprd,sc27xx-eic"; + reg = <0x300>; + interrupt-parent = <&sc2731_pmic>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + regulators { compatible = "sprd,sc27xx-regulator"; diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi index 5dbfb796d9f9..3f5160d2f130 100644 --- a/arch/arm64/boot/dts/sprd/sc9860.dtsi +++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi @@ -7,6 +7,8 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> #include "whale2.dtsi" / { @@ -326,7 +328,7 @@ reg = <4>; soc_funnel_in_port1: endpoint { slave-mode; - remote-endpioint = + remote-endpoint = <&stm_out_port>; }; }; @@ -679,5 +681,33 @@ }; }; }; + + gpio-keys { + compatible = "gpio-keys"; + + key-volumedown { + label = "Volume Down Key"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&eic_debounce 2 GPIO_ACTIVE_LOW>; + debounce-interval = <2>; + wakeup-source; + }; + + key-volumeup { + label = "Volume Up Key"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pmic_eic 10 GPIO_ACTIVE_HIGH>; + debounce-interval = <2>; + wakeup-source; + }; + + key-power { + label = "Power Key"; + linux,code = <KEY_POWER>; + gpios = <&pmic_eic 1 GPIO_ACTIVE_HIGH>; + debounce-interval = <2>; + wakeup-source; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi index 66a881e6da92..e9db9108f3c0 100644 --- a/arch/arm64/boot/dts/sprd/whale2.dtsi +++ b/arch/arm64/boot/dts/sprd/whale2.dtsi @@ -154,6 +154,56 @@ clocks = <&aon_gate CLK_SPLK_EB>; }; + eic_debounce: gpio@40210000 { + compatible = "sprd,sc9860-eic-debounce"; + reg = <0 0x40210000 0 0x80>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + }; + + eic_latch: gpio@40210080 { + compatible = "sprd,sc9860-eic-latch"; + reg = <0 0x40210080 0 0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + }; + + eic_async: gpio@402100a0 { + compatible = "sprd,sc9860-eic-async"; + reg = <0 0x402100a0 0 0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + }; + + eic_sync: gpio@402100c0 { + compatible = "sprd,sc9860-eic-sync"; + reg = <0 0x402100c0 0 0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + }; + + ap_gpio: gpio@40280000 { + compatible = "sprd,sc9860-gpio"; + reg = <0 0x40280000 0 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + }; + pin_controller: pinctrl@402a0000 { compatible = "sprd,sc9860-pinctrl"; reg = <0 0x402a0000 0 0x10000>; @@ -164,8 +214,9 @@ reg = <0 0x40310000 0 0x1000>; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; timeout-sec = <12>; - clock-names = "enable"; - clocks = <&aon_gate CLK_APCPU_WDG_EB>; + clock-names = "enable", "rtc_enable"; + clocks = <&aon_gate CLK_APCPU_WDG_EB>, + <&aon_gate CLK_AP_WDG_RTC_EB>; }; }; diff --git a/arch/arm64/boot/dts/synaptics/Makefile b/arch/arm64/boot/dts/synaptics/Makefile new file mode 100644 index 000000000000..de71ddda6835 --- /dev/null +++ b/arch/arm64/boot/dts/synaptics/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 +# Berlin SoC Family +dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-dmp.dtb +dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-stb.dtb diff --git a/arch/arm64/boot/dts/synaptics/berlin4ct-dmp.dts b/arch/arm64/boot/dts/synaptics/berlin4ct-dmp.dts new file mode 100644 index 000000000000..c64a179ebbb7 --- /dev/null +++ b/arch/arm64/boot/dts/synaptics/berlin4ct-dmp.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2015 Marvell Technology Group Ltd. + * + * Author: Jisheng Zhang <jszhang@marvell.com> + */ + +/dts-v1/; + +#include "berlin4ct.dtsi" + +/ { + model = "Marvell BG4CT DMP board"; + compatible = "marvell,berlin4ct-dmp", "marvell,berlin4ct", "marvell,berlin"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@1000000 { + device_type = "memory"; + /* the first 16MB is for firmwares' usage */ + reg = <0 0x01000000 0 0x7f000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/synaptics/berlin4ct-stb.dts b/arch/arm64/boot/dts/synaptics/berlin4ct-stb.dts new file mode 100644 index 000000000000..277dccfa05cb --- /dev/null +++ b/arch/arm64/boot/dts/synaptics/berlin4ct-stb.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2015 Marvell Technology Group Ltd. + * + * Author: Jisheng Zhang <jszhang@marvell.com> + */ + +/dts-v1/; + +#include "berlin4ct.dtsi" + +/ { + model = "Marvell BG4CT STB board"; + compatible = "marvell,berlin4ct-stb", "marvell,berlin4ct", "marvell,berlin"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@1000000 { + device_type = "memory"; + /* the first 16MB is for firmwares' usage */ + reg = <0 0x01000000 0 0x7f000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi index d2f88b92d8e2..216767e2edf6 100644 --- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi +++ b/arch/arm64/boot/dts/synaptics/berlin4ct.dtsi @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) /* * Copyright (C) 2015 Marvell Technology Group Ltd. * * Author: Jisheng Zhang <jszhang@marvell.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/interrupt-controller/arm-gic.h> |