summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
authorShawn Guo <shawn.guo@linaro.org>2012-10-15 16:48:04 +0800
committerOlof Johansson <olof@lixom.net>2012-10-16 10:07:04 -0700
commit3d76f9f5d3f6c88c576ebd92c3e2edb6d6a27e6f (patch)
treed66d98bad5cd50c85690dc71ceef56f476120f66 /arch/arm
parent5448a279ebf2a8e4cc7289ff1ef382b3e71b8ea6 (diff)
ARM: dts: imx6q-arm2: move NANDF_CS pins out of 'hog'
Commit 9e3c0066 (ARM: dts: imx6q-arm2: add pinctrl for uart and enet) defines NANDF_CS pins as gpio in 'hog', assuming these two pins are always used by usdhc3 in gpio mode as card-detection and write-protection on ARM2 board. But it's not true. These pins are shared by usdhc3 and gpmi-nand. We should have the pins functional for gpmi-nand when usdhc3 is disabled. Move the pins out of 'hog', so that pins only work in gpio mode as CD and WP when usdhc3 is enabled, and otherwise they are available for gpmi-nand. Reported-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/boot/dts/imx6q-arm2.dts10
1 files changed, 9 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index 15df4c105e89..5bfa02a3f85c 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -37,6 +37,13 @@
pinctrl_hog: hoggrp {
fsl,pins = <
176 0x80000000 /* MX6Q_PAD_EIM_D25__GPIO_3_25 */
+ >;
+ };
+ };
+
+ arm2 {
+ pinctrl_usdhc3_arm2: usdhc3grp-arm2 {
+ fsl,pins = <
1363 0x80000000 /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */
1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */
>;
@@ -58,7 +65,8 @@
wp-gpios = <&gpio6 14 0>;
vmmc-supply = <&reg_3p3v>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3_1>;
+ pinctrl-0 = <&pinctrl_usdhc3_1
+ &pinctrl_usdhc3_arm2>;
status = "okay";
};