Merge tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "This contains pretty many small commits covering fairly large range of
  files in sound/ directory.  Partly because of additional API support
  and partly because of constantly developed ASoC and ARM stuff.

  Some highlights:

   - Introduced the helper function and documentation for exposing the
     channel map via control API, as discussed in Plumbers; most of PCI
     drivers are covered, will follow more drivers later

   - Most of drivers have been replaced with the new PM callbacks (if
     the bus is supported)

   - HD-audio controller got the support of runtime PM and the support
     of D3 clock-stop.  Also changing the power_save option in sysfs
     kicks off immediately to enable / disable the power-save mode.

   - Another significant code change in HD-audio is the rewrite of
     firmware loading code.  Other than that, most of changes in
     HD-audio are continued cleanups and standardization for the generic
     auto parser and bug fixes (HBR, device-specific fixups), in
     addition to the support of channel-map API.

   - Addition of ASoC bindings for the compressed API, used by the
     mid-x86 drivers.

   - Lots of cleanups and API refreshes for ASoC codec drivers and
     DaVinci.

   - Conversion of OMAP to dmaengine.

   - New machine driver for Wolfson Microelectronics Bells.

   - New CODEC driver for Wolfson Microelectronics WM0010.

   - Enhancements to the ux500 and wm2000 drivers

   - A new driver for DA9055 and the support for regulator bypass mode."

Fix up various arm soc header file reorg conflicts.

* tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (339 commits)
  ALSA: hda - Add new codec ALC283 ALC290 support
  ALSA: hda - avoid unneccesary indices on "Headphone Jack" controls
  ALSA: hda - fix indices on boost volume on Conexant
  ALSA: aloop - add locking to timer access
  ALSA: hda - Fix hang caused by race during suspend.
  sound: Remove unnecessary semicolon
  ALSA: hda/realtek - Fix detection of ALC271X codec
  ALSA: hda - Add inverted internal mic quirk for Lenovo IdeaPad U310
  ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event
  ALSA: hda - make a generic unsol event handler
  ASoC: codecs: Add DA9055 codec driver
  ASoC: eukrea-tlv320: Convert it to platform driver
  ALSA: ASoC: add DT bindings for CS4271
  ASoC: wm_hubs: Ensure volume updates are handled during class W startup
  ASoC: wm5110: Adding missing volume update bits
  ASoC: wm5110: Add OUT3R support
  ASoC: wm5110: Add AEC loopback support
  ASoC: wm5110: Rename EPOUT to HPOUT3
  ASoC: arizona: Add more clock rates
  ASoC: arizona: Add more DSP options for mixer input muxes
  ...

30 files changed, 163 insertions, 315 deletions

diff --git a/arch/arm/mach-davinci/asp.h b/arch/arm/mach-davinci/asp.h
new file mode 100644
index 000000000000..d9b2acd12393
--- /dev/null
+++ b/arch/arm/mach-davinci/asp.h
@@ -0,0 +1,49 @@
+/*
+ * TI DaVinci Audio definitions
+ */
+#ifndef __ASM_ARCH_DAVINCI_ASP_H
+#define __ASM_ARCH_DAVINCI_ASP_H
+
+/* Bases of dm644x and dm355 register banks */
+#define DAVINCI_ASP0_BASE	0x01E02000
+#define DAVINCI_ASP1_BASE	0x01E04000
+
+/* Bases of dm365 register banks */
+#define DAVINCI_DM365_ASP0_BASE	0x01D02000
+
+/* Bases of dm646x register banks */
+#define DAVINCI_DM646X_MCASP0_REG_BASE		0x01D01000
+#define DAVINCI_DM646X_MCASP1_REG_BASE		0x01D01800
+
+/* Bases of da850/da830 McASP0  register banks */
+#define DAVINCI_DA8XX_MCASP0_REG_BASE	0x01D00000
+
+/* Bases of da830 McASP1 register banks */
+#define DAVINCI_DA830_MCASP1_REG_BASE	0x01D04000
+
+/* EDMA channels of dm644x and dm355 */
+#define DAVINCI_DMA_ASP0_TX	2
+#define DAVINCI_DMA_ASP0_RX	3
+#define DAVINCI_DMA_ASP1_TX	8
+#define DAVINCI_DMA_ASP1_RX	9
+
+/* EDMA channels of dm646x */
+#define DAVINCI_DM646X_DMA_MCASP0_AXEVT0	6
+#define DAVINCI_DM646X_DMA_MCASP0_AREVT0	9
+#define DAVINCI_DM646X_DMA_MCASP1_AXEVT1	12
+
+/* EDMA channels of da850/da830 McASP0 */
+#define DAVINCI_DA8XX_DMA_MCASP0_AREVT	0
+#define DAVINCI_DA8XX_DMA_MCASP0_AXEVT	1
+
+/* EDMA channels of da830 McASP1 */
+#define DAVINCI_DA830_DMA_MCASP1_AREVT	2
+#define DAVINCI_DA830_DMA_MCASP1_AXEVT	3
+
+/* Interrupts */
+#define DAVINCI_ASP0_RX_INT	IRQ_MBRINT
+#define DAVINCI_ASP0_TX_INT	IRQ_MBXINT
+#define DAVINCI_ASP1_RX_INT	IRQ_MBRINT
+#define DAVINCI_ASP1_TX_INT	IRQ_MBXINT
+
+#endif /* __ASM_ARCH_DAVINCI_ASP_H */
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index a37fc44e29bc..12d544befcfa 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -22,10 +22,10 @@
 #include <linux/davinci_emac.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
-
-#include <mach/asp.h>
+#include <linux/platform_data/davinci_asp.h>
 #include <linux/platform_data/keyscan-davinci.h>
 #include <mach/hardware.h>
+#include <mach/edma.h>
 
 #include <media/davinci/vpfe_capture.h>
 #include <media/davinci/vpif_types.h>
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 783eab6845c4..bd2f72b414bc 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -24,6 +24,7 @@
 #include <mach/cpuidle.h>
 
 #include "clock.h"
+#include "asp.h"
 
 #define DA8XX_TPCC_BASE			0x01c00000
 #define DA8XX_TPTC0_BASE		0x01c08000
@@ -505,15 +506,8 @@ static struct platform_device da850_mcasp_device = {
 	.resource	= da850_mcasp_resources,
 };
 
-static struct platform_device davinci_pcm_device = {
-	.name	= "davinci-pcm-audio",
-	.id	= -1,
-};
-
 void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata)
 {
-	platform_device_register(&davinci_pcm_device);
-
 	/* DA830/OMAP-L137 has 3 instances of McASP */
 	if (cpu_is_davinci_da830() && id == 1) {
 		da830_mcasp1_device.dev.platform_data = pdata;
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 3a42b6f79aa9..4c48a36ee567 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -313,16 +313,6 @@ static void davinci_init_wdt(void)
 
 /*-------------------------------------------------------------------------*/
 
-static struct platform_device davinci_pcm_device = {
-	.name		= "davinci-pcm-audio",
-	.id		= -1,
-};
-
-static void davinci_init_pcm(void)
-{
-	platform_device_register(&davinci_pcm_device);
-}
-
 /*-------------------------------------------------------------------------*/
 
 struct davinci_timer_instance davinci_timer_instance[2] = {
@@ -345,7 +335,6 @@ static int __init davinci_init_devices(void)
 	/* please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
 	 */
-	davinci_init_pcm();
 	davinci_init_wdt();
 
 	return 0;
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index adbde33eca01..a255434908db 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -26,13 +26,13 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
-#include <mach/asp.h>
 #include <linux/platform_data/spi-davinci.h>
 #include <mach/gpio-davinci.h>
 
 #include "davinci.h"
 #include "clock.h"
 #include "mux.h"
+#include "asp.h"
 
 #define DM355_UART2_BASE	(IO_PHYS + 0x206000)
 
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 719e22f2a37e..b680c832e0ba 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -29,7 +29,6 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
-#include <mach/asp.h>
 #include <linux/platform_data/keyscan-davinci.h>
 #include <linux/platform_data/spi-davinci.h>
 #include <mach/gpio-davinci.h>
@@ -37,6 +36,7 @@
 #include "davinci.h"
 #include "clock.h"
 #include "mux.h"
+#include "asp.h"
 
 #define DM365_REF_FREQ		24000000	/* 24 MHz on the DM365 EVM */
 
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index c8b866657fcb..0755d466221a 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -23,12 +23,12 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
-#include <mach/asp.h>
 #include <mach/gpio-davinci.h>
 
 #include "davinci.h"
 #include "clock.h"
 #include "mux.h"
+#include "asp.h"
 
 /*
  * Device specific clocks
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 9eb87c1d1edd..97c0f8e555bd 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -24,12 +24,12 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
-#include <mach/asp.h>
 #include <mach/gpio-davinci.h>
 
 #include "davinci.h"
 #include "clock.h"
 #include "mux.h"
+#include "asp.h"
 
 #define DAVINCI_VPIF_BASE       (0x01C12000)
 
diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h
deleted file mode 100644
index 9aa240909a2c..000000000000
--- a/arch/arm/mach-davinci/include/mach/asp.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * <mach/asp.h> - DaVinci Audio Serial Port support
- */
-#ifndef __ASM_ARCH_DAVINCI_ASP_H
-#define __ASM_ARCH_DAVINCI_ASP_H
-
-#include <mach/irqs.h>
-#include <mach/edma.h>
-
-/* Bases of dm644x and dm355 register banks */
-#define DAVINCI_ASP0_BASE	0x01E02000
-#define DAVINCI_ASP1_BASE	0x01E04000
-
-/* Bases of dm365 register banks */
-#define DAVINCI_DM365_ASP0_BASE	0x01D02000
-
-/* Bases of dm646x register banks */
-#define	DAVINCI_DM646X_MCASP0_REG_BASE		0x01D01000
-#define DAVINCI_DM646X_MCASP1_REG_BASE		0x01D01800
-
-/* Bases of da850/da830 McASP0  register banks */
-#define DAVINCI_DA8XX_MCASP0_REG_BASE	0x01D00000
-
-/* Bases of da830 McASP1 register banks */
-#define DAVINCI_DA830_MCASP1_REG_BASE	0x01D04000
-
-/* EDMA channels of dm644x and dm355 */
-#define DAVINCI_DMA_ASP0_TX	2
-#define DAVINCI_DMA_ASP0_RX	3
-#define DAVINCI_DMA_ASP1_TX	8
-#define DAVINCI_DMA_ASP1_RX	9
-
-/* EDMA channels of dm646x */
-#define	DAVINCI_DM646X_DMA_MCASP0_AXEVT0	6
-#define	DAVINCI_DM646X_DMA_MCASP0_AREVT0	9
-#define	DAVINCI_DM646X_DMA_MCASP1_AXEVT1	12
-
-/* EDMA channels of da850/da830 McASP0 */
-#define	DAVINCI_DA8XX_DMA_MCASP0_AREVT	0
-#define	DAVINCI_DA8XX_DMA_MCASP0_AXEVT	1
-
-/* EDMA channels of da830 McASP1 */
-#define	DAVINCI_DA830_DMA_MCASP1_AREVT	2
-#define	DAVINCI_DA830_DMA_MCASP1_AXEVT	3
-
-/* Interrupts */
-#define DAVINCI_ASP0_RX_INT	IRQ_MBRINT
-#define DAVINCI_ASP0_TX_INT	IRQ_MBXINT
-#define DAVINCI_ASP1_RX_INT	IRQ_MBRINT
-#define DAVINCI_ASP1_TX_INT	IRQ_MBXINT
-
-struct snd_platform_data {
-	u32 tx_dma_offset;
-	u32 rx_dma_offset;
-	enum dma_event_q asp_chan_q;	/* event queue number for ASP channel */
-	enum dma_event_q ram_chan_q;	/* event queue number for RAM channel */
-	unsigned int codec_fmt;
-	/*
-	 * Allowing this is more efficient and eliminates left and right swaps
-	 * caused by underruns, but will swap the left and right channels
-	 * when compared to previous behavior.
-	 */
-	unsigned enable_channel_combine:1;
-	unsigned sram_size_playback;
-	unsigned sram_size_capture;
-
-	/*
-	 * If McBSP peripheral gets the clock from an external pin,
-	 * there are three chooses, that are MCBSP_CLKX, MCBSP_CLKR
-	 * and MCBSP_CLKS.
-	 * Depending on different hardware connections it is possible
-	 * to use this setting to change the behaviour of McBSP
-	 * driver. The dm365_clk_input_pin enum is available for dm365
-	 */
-	int clk_input_pin;
-
-	/*
-	 * This flag works when both clock and FS are outputs for the cpu
-	 * and makes clock more accurate (FS is not symmetrical and the
-	 * clock is very fast.
-	 * The clock becoming faster is named
-	 * i2s continuous serial clock (I2S_SCK) and it is an externally
-	 * visible bit clock.
-	 *
-	 * first line : WordSelect
-	 * second line : ContinuousSerialClock
-	 * third line: SerialData
-	 *
-	 * SYMMETRICAL APPROACH:
-	 *   _______________________          LEFT
-	 * _|         RIGHT         |______________________|
-	 *     _   _         _   _   _   _         _   _
-	 *   _| |_| |_ x16 _| |_| |_| |_| |_ x16 _| |_| |_
-	 *     _   _         _   _   _   _         _   _
-	 *   _/ \_/ \_ ... _/ \_/ \_/ \_/ \_ ... _/ \_/ \_
-	 *    \_/ \_/       \_/ \_/ \_/ \_/       \_/ \_/
-	 *
-	 * ACCURATE CLOCK APPROACH:
-	 *   ______________          LEFT
-	 * _|     RIGHT    |_______________________________|
-	 *     _         _   _         _   _   _   _   _   _
-	 *   _| |_ x16 _| |_| |_ x16 _| |_| |_| |_| |_| |_| |
-	 *     _         _   _          _      dummy cycles
-	 *   _/ \_ ... _/ \_/ \_  ... _/ \__________________
-	 *    \_/       \_/ \_/        \_/
-	 *
-	 */
-	bool i2s_accurate_sck;
-
-	/* McASP specific fields */
-	int tdm_slots;
-	u8 op_mode;
-	u8 num_serializer;
-	u8 *serial_dir;
-	u8 version;
-	u8 txnumevt;
-	u8 rxnumevt;
-};
-
-enum {
-	MCASP_VERSION_1 = 0,	/* DM646x */
-	MCASP_VERSION_2,	/* DA8xx/OMAPL1x */
-};
-
-enum dm365_clk_input_pin {
-	MCBSP_CLKR = 0,		/* DM365 */
-	MCBSP_CLKS,
-};
-
-#define INACTIVE_MODE	0
-#define TX_MODE		1
-#define RX_MODE		2
-
-#define DAVINCI_MCASP_IIS_MODE	0
-#define DAVINCI_MCASP_DIT_MODE	1
-
-#endif /* __ASM_ARCH_DAVINCI_ASP_H */
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 33e78ae2a254..c9ee723c56f3 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -16,10 +16,10 @@
 #include <linux/platform_device.h>
 #include <linux/davinci_emac.h>
 #include <linux/spi/spi.h>
+#include <linux/platform_data/davinci_asp.h>
 
 #include <mach/serial.h>
 #include <mach/edma.h>
-#include <mach/asp.h>
 #include <mach/pm.h>
 #include <linux/platform_data/i2c-davinci.h>
 #include <linux/platform_data/mmc-davinci.h>
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
index fd3177f9e79a..98aef571b9f8 100644
--- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -348,4 +348,5 @@ void __init eukrea_mbimx27_baseboard_init(void)
 	imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data);
 
 	gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info);
+	imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
 }
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
index dfd2da87c2df..0b84666792f0 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
@@ -306,4 +306,5 @@ void __init eukrea_mbimxsd25_baseboard_init(void)
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 	gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
 	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
+	imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
 }
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
index 6e9dd12a6961..c6532a007d46 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
@@ -315,4 +315,5 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 	gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
 	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
+	imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
 }
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c
index 96a24b73dc23..8b0de30d7a3f 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c
@@ -228,4 +228,5 @@ void __init eukrea_mbimxsd51_baseboard_init(void)
 
 	gpio_led_register_device(-1, &eukrea_mbimxsd51_led_info);
 	imx_add_gpio_keys(&eukrea_mbimxsd51_button_data);
+	imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
 }
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 821d6aac411c..141756f00ae5 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -32,6 +32,7 @@
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/leds.h>
+#include <linux/platform_data/asoc-mx27vis.h>
 #include <media/soc_camera.h>
 #include <sound/tlv320aic32x4.h>
 #include <asm/mach-types.h>
@@ -58,6 +59,11 @@
 #define EXPBOARD_BIT1		(GPIO_PORTD + 27)
 #define EXPBOARD_BIT0		(GPIO_PORTD + 28)
 
+#define AMP_GAIN_0		(GPIO_PORTF + 9)
+#define AMP_GAIN_1		(GPIO_PORTF + 8)
+#define AMP_MUTE_SDL		(GPIO_PORTE + 5)
+#define AMP_MUTE_SDR		(GPIO_PORTF + 7)
+
 static const int visstrim_m10_pins[] __initconst = {
 	/* UART1 (console) */
 	PE12_PF_UART1_TXD,
@@ -139,6 +145,11 @@ static const int visstrim_m10_pins[] __initconst = {
 	EXPBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
 	EXPBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
 	EXPBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN,
+	/* Audio AMP control */
+	AMP_GAIN_0 | GPIO_GPIO | GPIO_OUT,
+	AMP_GAIN_1 | GPIO_GPIO | GPIO_OUT,
+	AMP_MUTE_SDL | GPIO_GPIO | GPIO_OUT,
+	AMP_MUTE_SDR | GPIO_GPIO | GPIO_OUT,
 };
 
 static struct gpio visstrim_m10_version_gpios[] = {
@@ -166,6 +177,26 @@ static const struct gpio visstrim_m10_gpios[] __initconst = {
 		.flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
 		.label = "usbotg_cs",
 	},
+	{
+		.gpio = AMP_GAIN_0,
+		.flags = GPIOF_DIR_OUT,
+		.label = "amp-gain-0",
+	},
+	{
+		.gpio = AMP_GAIN_1,
+		.flags = GPIOF_DIR_OUT,
+		.label = "amp-gain-1",
+	},
+	{
+		.gpio = AMP_MUTE_SDL,
+		.flags = GPIOF_DIR_OUT,
+		.label = "amp-mute-sdl",
+	},
+	{
+		.gpio = AMP_MUTE_SDR,
+		.flags = GPIOF_DIR_OUT,
+		.label = "amp-mute-sdr",
+	},
 };
 
 /* Camera */
@@ -444,6 +475,14 @@ static void __init visstrim_deinterlace_init(void)
 }
 
 
+/* Audio */
+static const struct snd_mx27vis_platform_data snd_mx27vis_pdata __initconst = {
+	.amp_gain0_gpio = AMP_GAIN_0,
+	.amp_gain1_gpio = AMP_GAIN_1,
+	.amp_mutel_gpio = AMP_MUTE_SDL,
+	.amp_muter_gpio = AMP_MUTE_SDR,
+};
+
 static void __init visstrim_m10_revision(void)
 {
 	int exp_version = 0;
@@ -502,7 +541,8 @@ static void __init visstrim_m10_board_init(void)
 	imx27_add_fec(NULL);
 	imx_add_gpio_keys(&visstrim_gpio_keys_platform_data);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-	imx_add_platform_device("mx27vis", 0, NULL, 0, NULL, 0);
+	imx_add_platform_device("mx27vis", 0, NULL, 0, &snd_mx27vis_pdata,
+				sizeof(snd_mx27vis_pdata));
 	platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0,
 				      &iclink_tvp5150, sizeof(iclink_tvp5150));
 	gpio_led_register_device(0, &visstrim_m10_led_data);
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 0d99c9110d01..e16289755f2e 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -263,6 +263,16 @@ static __init void am3517_evm_musb_init(void)
 	usb_musb_init(&musb_board_data);
 }
 
+static __init void am3517_evm_mcbsp1_init(void)
+{
+	u32 devconf0;
+
+	/* McBSP1 CLKR/FSR signal to be connected to CLKX/FSX pin */
+	devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	devconf0 |=  OMAP2_MCBSP1_CLKR_MASK | OMAP2_MCBSP1_FSR_MASK;
+	omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0);
+}
+
 static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
 #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
@@ -366,6 +376,9 @@ static void __init am3517_evm_init(void)
 	/* MUSB */
 	am3517_evm_musb_init();
 
+	/* McBSP1 */
+	am3517_evm_mcbsp1_init();
+
 	/* MMC init function */
 	omap_hsmmc_init(mmc);
 }
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 8ffd612c5e07..376d26eb601c 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -723,6 +723,7 @@ static void __init cm_t3x_common_init(void)
 	cm_t35_init_ethernet();
 	cm_t35_init_led();
 	cm_t35_init_display();
+	omap_twl4030_audio_init("cm-t3x");
 
 	usb_musb_init(NULL);
 	cm_t35_init_usbh();
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 7bb8056d4388..1fd161e934c7 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -623,6 +623,7 @@ static void __init devkit8000_init(void)
 	usbhs_init(&usbhs_bdata);
 	omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions,
 			     ARRAY_SIZE(devkit8000_nand_partitions));
+	omap_twl4030_audio_init("omap3beagle");
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index fb8bd837dd13..48d5e41dfbfa 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -625,6 +625,7 @@ static void __init igep_init(void)
 
 	igep_flash_init();
 	igep_leds_init();
+	omap_twl4030_audio_init("igep2");
 
 	/*
 	 * WLAN-BT combo module from MuRata which has a Marvell WLAN
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 68ff8d51973c..a08bebc94ec5 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -514,6 +514,7 @@ static void __init omap3_beagle_init(void)
 	usbhs_init(&usbhs_bdata);
 	omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
 			     ARRAY_SIZE(omap3beagle_nand_partitions));
+	omap_twl4030_audio_init("omap3beagle");
 
 	/* Ensure msecure is mux'd to be able to set the RTC. */
 	omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH);
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index c64e565bdef5..a3959de85e05 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -739,6 +739,7 @@ static void __init omap3_evm_init(void)
 	omap3evm_init_smsc911x();
 	omap3_evm_display_init();
 	omap3_evm_wl12xx_init();
+	omap_twl4030_audio_init("omap3evm");
 }
 
 MACHINE_START(OMAP3EVM, "OMAP3 EVM")
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 2e7f24030fc9..b700685762b5 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -504,6 +504,7 @@ static void __init overo_init(void)
 	overo_display_init();
 	overo_init_led();
 	overo_init_keys();
+	omap_twl4030_audio_init("overo");
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 6bcc107b9fc3..67f8540c8e07 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -35,6 +35,7 @@
 #include "common-board-devices.h"
 
 #define OMAP_ZOOM_WLAN_PMENA_GPIO	(101)
+#define ZOOM2_HEADSET_EXTMUTE_GPIO	(153)
 #define OMAP_ZOOM_WLAN_IRQ_GPIO		(162)
 
 #define LCD_PANEL_ENABLE_GPIO		(7 + OMAP_MAX_GPIO_LINES)
@@ -245,12 +246,6 @@ static int zoom_twl_gpio_setup(struct device *dev,
 	return ret;
 }
 
-/* EXTMUTE callback function */
-static void zoom2_set_hs_extmute(int mute)
-{
-	gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute);
-}
-
 static struct twl4030_gpio_platform_data zoom_gpio_data = {
 	.setup		= zoom_twl_gpio_setup,
 };
@@ -277,7 +272,7 @@ static int __init omap_i2c_init(void)
 
 		codec_data->ramp_delay_value = 3;	/* 161 ms */
 		codec_data->hs_extmute = 1;
-		codec_data->set_hs_extmute = zoom2_set_hs_extmute;
+		codec_data->hs_extmute_gpio = ZOOM2_HEADSET_EXTMUTE_GPIO;
 	}
 	omap_pmic_init(1, 2400, "twl5030", 7 + OMAP_INTC_START, &zoom_twldata);
 	omap_register_i2c_bus(2, 400, NULL, 0);
diff --git a/arch/arm/mach-omap2/include/mach/board-zoom.h b/arch/arm/mach-omap2/include/mach/board-zoom.h
index 775fdc3b000b..2e9486940ead 100644
--- a/arch/arm/mach-omap2/include/mach/board-zoom.h
+++ b/arch/arm/mach-omap2/include/mach/board-zoom.h
@@ -8,5 +8,3 @@
 extern int __init zoom_debugboard_init(void);
 extern void __init zoom_peripherals_init(void);
 extern void __init zoom_display_init(void);
-
-#define ZOOM2_HEADSET_EXTMUTE_GPIO	153
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 7d47407d6d46..37f8f948047b 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -15,6 +15,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
@@ -23,8 +24,6 @@
 #include <plat/omap_device.h>
 #include <linux/pm_runtime.h>
 
-#include "control.h"
-
 /*
  * FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle.
  * Sidetone needs non-gated ICLK and sidetone autoidle is broken.
@@ -32,112 +31,6 @@
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-34xx.h"
 
-/* McBSP1 internal signal muxing function for OMAP2/3 */
-static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal,
-				   const char *src)
-{
-	u32 v;
-
-	v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-
-	if (!strcmp(signal, "clkr")) {
-		if (!strcmp(src, "clkr"))
-			v &= ~OMAP2_MCBSP1_CLKR_MASK;
-		else if (!strcmp(src, "clkx"))
-			v |= OMAP2_MCBSP1_CLKR_MASK;
-		else
-			return -EINVAL;
-	} else if (!strcmp(signal, "fsr")) {
-		if (!strcmp(src, "fsr"))
-			v &= ~OMAP2_MCBSP1_FSR_MASK;
-		else if (!strcmp(src, "fsx"))
-			v |= OMAP2_MCBSP1_FSR_MASK;
-		else
-			return -EINVAL;
-	} else {
-		return -EINVAL;
-	}
-
-	omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
-
-	return 0;
-}
-
-/* McBSP4 internal signal muxing function for OMAP4 */
-#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX	(1 << 31)
-#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX	(1 << 30)
-static int omap4_mcbsp4_mux_rx_clk(struct device *dev, const char *signal,
-				   const char *src)
-{
-	u32 v;
-
-	/*
-	 * In CONTROL_MCBSPLP register only bit 30 (CLKR mux), and bit 31 (FSR
-	 * mux) is used */
-	v = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP);
-
-	if (!strcmp(signal, "clkr")) {
-		if (!strcmp(src, "clkr"))
-			v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX;
-		else if (!strcmp(src, "clkx"))
-			v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX;
-		else
-			return -EINVAL;
-	} else if (!strcmp(signal, "fsr")) {
-		if (!strcmp(src, "fsr"))
-			v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX;
-		else if (!strcmp(src, "fsx"))
-			v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX;
-		else
-			return -EINVAL;
-	} else {
-		return -EINVAL;
-	}
-
-	omap4_ctrl_pad_writel(v, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP);
-
-	return 0;
-}
-
-/* McBSP CLKS source switching function */
-static int omap2_mcbsp_set_clk_src(struct device *dev, struct clk *clk,
-				   const char *src)
-{
-	struct clk *fck_src;
-	char *fck_src_name;
-	int r;
-
-	if (!strcmp(src, "clks_ext"))
-		fck_src_name = "pad_fck";
-	else if (!strcmp(src, "clks_fclk"))
-		fck_src_name = "prcm_fck";
-	else
-		return -EINVAL;
-
-	fck_src = clk_get(dev, fck_src_name);
-	if (IS_ERR_OR_NULL(fck_src)) {
-		pr_err("omap-mcbsp: %s: could not clk_get() %s\n", "clks",
-		       fck_src_name);
-		return -EINVAL;
-	}
-
-	pm_runtime_put_sync(dev);
-
-	r = clk_set_parent(clk, fck_src);
-	if (IS_ERR_VALUE(r)) {
-		pr_err("omap-mcbsp: %s: could not clk_set_parent() to %s\n",
-		       "clks", fck_src_name);
-		clk_put(fck_src);
-		return -EINVAL;
-	}
-
-	pm_runtime_get_sync(dev);
-
-	clk_put(fck_src);
-
-	return 0;
-}
-
 static int omap3_enable_st_clock(unsigned int id, bool enable)
 {
 	unsigned int w;
@@ -179,17 +72,11 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 		pdata->reg_size = 4;
 		pdata->has_ccr = true;
 	}
-	pdata->set_clk_src = omap2_mcbsp_set_clk_src;
-
-	/* On OMAP2/3 the McBSP1 port has 6 pin configuration */
-	if (id == 1 && oh->class->rev < MCBSP_CONFIG_TYPE4)
-		pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
 
-	/* On OMAP4 the McBSP4 port has 6 pin configuration */
-	if (id == 4 && oh->class->rev == MCBSP_CONFIG_TYPE4)
-		pdata->mux_signal = omap4_mcbsp4_mux_rx_clk;
-
-	if (oh->class->rev == MCBSP_CONFIG_TYPE3) {
+	if (oh->class->rev == MCBSP_CONFIG_TYPE2) {
+		/* The FIFO has 128 locations */
+		pdata->buffer_size = 0x80;
+	} else if (oh->class->rev == MCBSP_CONFIG_TYPE3) {
 		if (id == 2)
 			/* The FIFO has 1024 + 256 locations */
 			pdata->buffer_size = 0x500;
@@ -225,7 +112,8 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 
 static int __init omap2_mcbsp_init(void)
 {
-	omap_hwmod_for_each_by_class("mcbsp", omap_init_mcbsp, NULL);
+	if (!of_have_populated_dt())
+		omap_hwmod_for_each_by_class("mcbsp", omap_init_mcbsp, NULL);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 8d7a93525bc6..652d0285bd6d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -5269,6 +5269,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__mcbsp4 = {
 
 static struct omap_hwmod_addr_space omap44xx_mcpdm_addrs[] = {
 	{
+		.name		= "mpu",
 		.pa_start	= 0x40132000,
 		.pa_end		= 0x4013207f,
 		.flags		= ADDR_TYPE_RT
@@ -5287,6 +5288,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm = {
 
 static struct omap_hwmod_addr_space omap44xx_mcpdm_dma_addrs[] = {
 	{
+		.name		= "dma",
 		.pa_start	= 0x49032000,
 		.pa_end		= 0x4903207f,
 		.flags		= ADDR_TYPE_RT
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 45f77413c21d..18a851959425 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -519,3 +519,30 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
 		pmic_data->v2v1 = &omap4_v2v1_idata;
 }
 #endif /* CONFIG_ARCH_OMAP4 */
+
+#if defined(CONFIG_SND_OMAP_SOC_OMAP_TWL4030) || \
+	defined(CONFIG_SND_OMAP_SOC_OMAP_TWL4030_MODULE)
+#include <linux/platform_data/omap-twl4030.h>
+
+static struct omap_tw4030_pdata omap_twl4030_audio_data;
+
+static struct platform_device audio_device = {
+	.name		= "omap-twl4030",
+	.id		= -1,
+	.dev = {
+		.platform_data = &omap_twl4030_audio_data,
+	},
+};
+
+void __init omap_twl4030_audio_init(char *card_name)
+{
+	omap_twl4030_audio_data.card_name = card_name;
+	platform_device_register(&audio_device);
+}
+
+#else /* SOC_OMAP_TWL4030 */
+void __init omap_twl4030_audio_init(char *card_name)
+{
+	return;
+}
+#endif /* SOC_OMAP_TWL4030 */
diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h
index 2256efe90cf1..dcfbad5ac471 100644
--- a/arch/arm/mach-omap2/twl-common.h
+++ b/arch/arm/mach-omap2/twl-common.h
@@ -60,4 +60,6 @@ void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
 void omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
 			   u32 pdata_flags, u32 regulators_flags);
 
+void omap_twl4030_audio_init(char *card_name);
+
 #endif /* __OMAP_PMIC_COMMON__ */
diff --git a/arch/arm/mach-tegra/include/mach/tegra_wm8903_pdata.h b/arch/arm/mach-tegra/include/mach/tegra_wm8903_pdata.h
deleted file mode 100644
index 9d293344a7ff..000000000000
--- a/arch/arm/mach-tegra/include/mach/tegra_wm8903_pdata.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/tegra_wm8903_pdata.h
- *
- * Copyright 2011 NVIDIA, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-struct tegra_wm8903_platform_data {
-	int gpio_spkr_en;
-	int gpio_hp_det;
-	int gpio_hp_mute;
-	int gpio_int_mic_en;
-	int gpio_ext_mic_en;
-};
diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c
index c38d75489240..d088afa034e8 100644
--- a/arch/arm/plat-samsung/dma-ops.c
+++ b/arch/arm/plat-samsung/dma-ops.c
@@ -91,7 +91,8 @@ static int samsung_dmadev_prepare(unsigned ch,
 		break;
 	case DMA_CYCLIC:
 		desc = dmaengine_prep_dma_cyclic(chan, param->buf,
-			param->len, param->period, param->direction);
+			param->len, param->period, param->direction,
+			DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 		break;
 	default:
 		dev_err(&chan->dev->device, "unsupported format\n");