[PATCH] ARM: 2804/1: OMAP update 9/11: Update OMAP arch files

Patch from Tony Lindgren

This patch by various OMAP developers syncs the OMAP
specific arch files with the linux-omap tree.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

8 files changed, 461 insertions, 92 deletions

diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index f1258c1f3a97..207df0fe934d 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -17,6 +17,7 @@
 #include <asm/io.h>
 #include <asm/arch/tc.h>
 
+extern int clk_init(void);
 extern void omap_check_revision(void);
 
 /*
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index a72fe55b513b..345365852f8c 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -19,6 +19,19 @@ endchoice
 
 comment "OMAP Feature Selections"
 
+config OMAP_RESET_CLOCKS
+	bool "Reset unused clocks during boot"
+	depends on ARCH_OMAP
+	default n
+	help
+	  Say Y if you want to reset unused clocks during boot.
+	  This option saves power, but assumes all drivers are
+	  using the clock framework. Broken drivers that do not
+	  yet use clock framework may not work with this option.
+	  If you are booting from another operating system, you
+	  probably do not want this option enabled until your
+	  device drivers work properly.
+
 config OMAP_MUX
 	bool "OMAP multiplexing support"
         depends on ARCH_OMAP
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 155157f309e0..59d91b3262ba 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -14,6 +14,7 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 
+#include <asm/io.h>
 #include <asm/semaphore.h>
 #include <asm/hardware/clock.h>
 #include <asm/arch/board.h>
@@ -25,6 +26,8 @@ static LIST_HEAD(clocks);
 static DECLARE_MUTEX(clocks_sem);
 static DEFINE_SPINLOCK(clockfw_lock);
 static void propagate_rate(struct clk *  clk);
+/* UART clock function */
+static int set_uart_rate(struct clk * clk, unsigned long rate);
 /* External clock (MCLK & BCLK) functions */
 static int set_ext_clk_rate(struct clk *  clk, unsigned long rate);
 static long round_ext_clk_rate(struct clk *  clk, unsigned long rate);
@@ -34,7 +37,7 @@ static int select_table_rate(struct clk *  clk, unsigned long rate);
 static long round_to_table_rate(struct clk *  clk, unsigned long rate);
 void clk_setdpll(__u16, __u16);
 
-struct mpu_rate rate_table[] = {
+static struct mpu_rate rate_table[] = {
 	/* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL
 	 * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv
 	 */
@@ -48,7 +51,7 @@ struct mpu_rate rate_table[] = {
 	{ 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */
 	{ 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */
 	{  96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */
-	{  48000000, 12000000, 192000000, 0x0ccf, 0x2810 }, /* 4/4/4/4/8/8 */
+	{  48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/8/4/4/8/8 */
 	{  24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */
 #endif
 #if defined(CONFIG_OMAP_ARM_182MHZ)
@@ -58,7 +61,7 @@ struct mpu_rate rate_table[] = {
 	{ 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */
 #endif
 #if defined(CONFIG_OMAP_ARM_150MHZ)
-	{ 150000000, 12000000, 150000000, 0x150a, 0x2cb0 }, /* 0/0/1/1/2/2 */
+	{ 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */
 #endif
 #if defined(CONFIG_OMAP_ARM_120MHZ)
 	{ 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */
@@ -76,19 +79,11 @@ struct mpu_rate rate_table[] = {
 };
 
 
-static void ckctl_recalc(struct clk *  clk)
-{
-	int dsor;
-
-	/* Calculate divisor encoded as 2-bit exponent */
-	dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset));
-	if (unlikely(clk->rate == clk->parent->rate / dsor))
-		return; /* No change, quick exit */
-	clk->rate = clk->parent->rate / dsor;
-
-	if (unlikely(clk->flags & RATE_PROPAGATES))
-		propagate_rate(clk);
-}
+static void ckctl_recalc(struct clk *  clk);
+int __clk_enable(struct clk *clk);
+void __clk_disable(struct clk *clk);
+void __clk_unuse(struct clk *clk);
+int __clk_use(struct clk *clk);
 
 
 static void followparent_recalc(struct clk *  clk)
@@ -102,6 +97,14 @@ static void watchdog_recalc(struct clk *  clk)
 	clk->rate = clk->parent->rate / 14;
 }
 
+static void uart_recalc(struct clk * clk)
+{
+	unsigned int val = omap_readl(clk->enable_reg);
+	if (val & clk->enable_bit)
+		clk->rate = 48000000;
+	else
+		clk->rate = 12000000;
+}
 
 static struct clk ck_ref = {
 	.name		= "ck_ref",
@@ -138,7 +141,7 @@ static struct clk arm_ck = {
 static struct clk armper_ck = {
 	.name		= "armper_ck",
 	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+	.flags		= CLOCK_IN_OMAP730 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  RATE_CKCTL,
 	.enable_reg	= ARM_IDLECT2,
 	.enable_bit	= EN_PERCK,
@@ -185,7 +188,7 @@ static struct clk armwdt_ck = {
 static struct clk arminth_ck16xx = {
 	.name		= "arminth_ck",
 	.parent		= &arm_ck,
-	.flags		= CLOCK_IN_OMAP16XX,
+	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
 	/* Note: On 16xx the frequency can be divided by 2 by programming
 	 * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
@@ -214,6 +217,38 @@ static struct clk dspmmu_ck = {
 	.recalc		= &ckctl_recalc,
 };
 
+static struct clk dspper_ck = {
+	.name		= "dspper_ck",
+	.parent		= &ck_dpll1,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  RATE_CKCTL | DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS,
+	.enable_reg	= DSP_IDLECT2,
+	.enable_bit	= EN_PERCK,
+	.rate_offset	= CKCTL_PERDIV_OFFSET,
+	.recalc		= &followparent_recalc,
+	//.recalc		= &ckctl_recalc,
+};
+
+static struct clk dspxor_ck = {
+	.name		= "dspxor_ck",
+	.parent		= &ck_ref,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS,
+	.enable_reg	= DSP_IDLECT2,
+	.enable_bit	= EN_XORPCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dsptim_ck = {
+	.name		= "dsptim_ck",
+	.parent		= &ck_ref,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  DSP_DOMAIN_CLOCK | VIRTUAL_IO_ADDRESS,
+	.enable_reg	= DSP_IDLECT2,
+	.enable_bit	= EN_DSPTIMCK,
+	.recalc		= &followparent_recalc,
+};
+
 static struct clk tc_ck = {
 	.name		= "tc_ck",
 	.parent		= &ck_dpll1,
@@ -226,7 +261,7 @@ static struct clk tc_ck = {
 static struct clk arminth_ck1510 = {
 	.name		= "arminth_ck",
 	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP1510,
+	.flags		= CLOCK_IN_OMAP1510 | ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
 	/* Note: On 1510 the frequency follows TC_CK
 	 *
@@ -237,7 +272,7 @@ static struct clk arminth_ck1510 = {
 static struct clk tipb_ck = {
 	.name		= "tibp_ck",
 	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP1510,
+	.flags		= CLOCK_IN_OMAP1510 | ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
 };
 
@@ -271,14 +306,15 @@ static struct clk tc2_ck = {
 static struct clk dma_ck = {
 	.name		= "dma_ck",
 	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+			  ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk dma_lcdfree_ck = {
 	.name		= "dma_lcdfree_ck",
 	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP16XX,
+	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
 };
 
@@ -303,14 +339,14 @@ static struct clk lb_ck = {
 static struct clk rhea1_ck = {
 	.name		= "rhea1_ck",
 	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP16XX,
+	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
 };
 
 static struct clk rhea2_ck = {
 	.name		= "rhea2_ck",
 	.parent		= &tc_ck,
-	.flags		= CLOCK_IN_OMAP16XX,
+	.flags		= CLOCK_IN_OMAP16XX | ALWAYS_ENABLED,
 	.recalc		= &followparent_recalc,
 };
 
@@ -325,43 +361,55 @@ static struct clk lcd_ck = {
 	.recalc		= &ckctl_recalc,
 };
 
-static struct clk uart1_ck = {
+static struct clk uart1_1510 = {
+	.name		= "uart1_ck",
+	/* Direct from ULPD, no parent */
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | ALWAYS_ENABLED,
+	.enable_reg	= MOD_CONF_CTRL_0,
+	.enable_bit	= 29,	/* Chooses between 12MHz and 48MHz */
+	.set_rate	= &set_uart_rate,
+	.recalc		= &uart_recalc,
+};
+
+static struct clk uart1_16xx = {
 	.name		= "uart1_ck",
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_FIXED | ENABLE_REG_32BIT,
+	.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED | ENABLE_REG_32BIT,
 	.enable_reg	= MOD_CONF_CTRL_0,
 	.enable_bit	= 29,
-	/* (Only on 1510)
-	 * The "enable bit" actually chooses between 48MHz and 12MHz.
-	 */
 };
 
 static struct clk uart2_ck = {
 	.name		= "uart2_ck",
 	/* Direct from ULPD, no parent */
-	.rate		= 48000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_FIXED | ENABLE_REG_32BIT,
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | ENABLE_REG_32BIT,
 	.enable_reg	= MOD_CONF_CTRL_0,
-	.enable_bit	= 30,
-	/* (for both 1510 and 16xx)
-	 * The "enable bit" actually chooses between 48MHz and 12MHz/32kHz.
-	 */
+	.enable_bit	= 30,	/* Chooses between 12MHz and 48MHz */
+	.set_rate	= &set_uart_rate,
+	.recalc		= &uart_recalc,
 };
 
-static struct clk uart3_ck = {
+static struct clk uart3_1510 = {
+	.name		= "uart3_ck",
+	/* Direct from ULPD, no parent */
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT | ALWAYS_ENABLED,
+	.enable_reg	= MOD_CONF_CTRL_0,
+	.enable_bit	= 31,	/* Chooses between 12MHz and 48MHz */
+	.set_rate	= &set_uart_rate,
+	.recalc		= &uart_recalc,
+};
+
+static struct clk uart3_16xx = {
 	.name		= "uart3_ck",
 	/* Direct from ULPD, no parent */
 	.rate		= 48000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
-			  RATE_FIXED | ENABLE_REG_32BIT,
+	.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED | ENABLE_REG_32BIT,
 	.enable_reg	= MOD_CONF_CTRL_0,
 	.enable_bit	= 31,
-	/* (Only on 1510)
-	 * The "enable bit" actually chooses between 48MHz and 12MHz.
-	 */
 };
 
 static struct clk usb_clko = {	/* 6 MHz output on W4_USB_CLKO */
@@ -480,6 +528,9 @@ static struct clk *  onchip_clks[] = {
 	/* CK_GEN2 clocks */
 	&dsp_ck,
 	&dspmmu_ck,
+	&dspper_ck,
+	&dspxor_ck,
+	&dsptim_ck,
 	/* CK_GEN3 clocks */
 	&tc_ck,
 	&tipb_ck,
@@ -494,9 +545,11 @@ static struct clk *  onchip_clks[] = {
 	&rhea2_ck,
 	&lcd_ck,
 	/* ULPD clocks */
-	&uart1_ck,
+	&uart1_1510,
+	&uart1_16xx,
 	&uart2_ck,
-	&uart3_ck,
+	&uart3_1510,
+	&uart3_16xx,
 	&usb_clko,
 	&usb_hhc_ck1510, &usb_hhc_ck16xx,
 	&mclk_1510,  &mclk_16xx,
@@ -547,14 +600,34 @@ int __clk_enable(struct clk *clk)
 		return 0;
 	}
 
+	if (clk->flags & DSP_DOMAIN_CLOCK) {
+		__clk_use(&api_ck);
+	}
+
 	if (clk->flags & ENABLE_REG_32BIT) {
-		regval32 = omap_readl(clk->enable_reg);
-		regval32 |= (1 << clk->enable_bit);
-		omap_writel(regval32, clk->enable_reg);
+		if (clk->flags & VIRTUAL_IO_ADDRESS) {
+			regval32 = __raw_readl(clk->enable_reg);
+			regval32 |= (1 << clk->enable_bit);
+			__raw_writel(regval32, clk->enable_reg);
+		} else {
+			regval32 = omap_readl(clk->enable_reg);
+			regval32 |= (1 << clk->enable_bit);
+			omap_writel(regval32, clk->enable_reg);
+		}
 	} else {
-		regval16 = omap_readw(clk->enable_reg);
-		regval16 |= (1 << clk->enable_bit);
-		omap_writew(regval16, clk->enable_reg);
+		if (clk->flags & VIRTUAL_IO_ADDRESS) {
+			regval16 = __raw_readw(clk->enable_reg);
+			regval16 |= (1 << clk->enable_bit);
+			__raw_writew(regval16, clk->enable_reg);
+		} else {
+			regval16 = omap_readw(clk->enable_reg);
+			regval16 |= (1 << clk->enable_bit);
+			omap_writew(regval16, clk->enable_reg);
+		}
+	}
+
+	if (clk->flags & DSP_DOMAIN_CLOCK) {
+		__clk_unuse(&api_ck);
 	}
 
 	return 0;
@@ -569,14 +642,34 @@ void __clk_disable(struct clk *clk)
 	if (clk->enable_reg == 0)
 		return;
 
+	if (clk->flags & DSP_DOMAIN_CLOCK) {
+		__clk_use(&api_ck);
+	}
+
 	if (clk->flags & ENABLE_REG_32BIT) {
-		regval32 = omap_readl(clk->enable_reg);
-		regval32 &= ~(1 << clk->enable_bit);
-		omap_writel(regval32, clk->enable_reg);
+		if (clk->flags & VIRTUAL_IO_ADDRESS) {
+			regval32 = __raw_readl(clk->enable_reg);
+			regval32 &= ~(1 << clk->enable_bit);
+			__raw_writel(regval32, clk->enable_reg);
+		} else {
+			regval32 = omap_readl(clk->enable_reg);
+			regval32 &= ~(1 << clk->enable_bit);
+			omap_writel(regval32, clk->enable_reg);
+		}
 	} else {
-		regval16 = omap_readw(clk->enable_reg);
-		regval16 &= ~(1 << clk->enable_bit);
-		omap_writew(regval16, clk->enable_reg);
+		if (clk->flags & VIRTUAL_IO_ADDRESS) {
+			regval16 = __raw_readw(clk->enable_reg);
+			regval16 &= ~(1 << clk->enable_bit);
+			__raw_writew(regval16, clk->enable_reg);
+		} else {
+			regval16 = omap_readw(clk->enable_reg);
+			regval16 &= ~(1 << clk->enable_bit);
+			omap_writew(regval16, clk->enable_reg);
+		}
+	}
+
+	if (clk->flags & DSP_DOMAIN_CLOCK) {
+		__clk_unuse(&api_ck);
 	}
 }
 
@@ -766,6 +859,33 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate)
 	return dsor_exp;
 }
 
+
+static void ckctl_recalc(struct clk *  clk)
+{
+	int dsor;
+
+	/* Calculate divisor encoded as 2-bit exponent */
+	if (clk->flags & DSP_DOMAIN_CLOCK) {
+		/* The clock control bits are in DSP domain,
+		 * so api_ck is needed for access.
+		 * Note that DSP_CKCTL virt addr = phys addr, so
+		 * we must use __raw_readw() instead of omap_readw().
+		 */
+		__clk_use(&api_ck);
+		dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset));
+		__clk_unuse(&api_ck);
+	} else {
+		dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset));
+	}
+	if (unlikely(clk->rate == clk->parent->rate / dsor))
+		return; /* No change, quick exit */
+	clk->rate = clk->parent->rate / dsor;
+
+	if (unlikely(clk->flags & RATE_PROPAGATES))
+		propagate_rate(clk);
+}
+
+
 long clk_round_rate(struct clk *clk, unsigned long rate)
 {
 	int dsor_exp;
@@ -826,6 +946,9 @@ static int select_table_rate(struct clk *  clk, unsigned long rate)
 	if (!ptr->rate)
 		return -EINVAL;
 
+	if (!ptr->rate)
+		return -EINVAL;
+
 	if (unlikely(ck_dpll1.rate == 0)) {
 		omap_writew(ptr->dpllctl_val, DPLL_CTL);
 		ck_dpll1.rate = ptr->pll_rate;
@@ -921,6 +1044,23 @@ static unsigned calc_ext_dsor(unsigned long rate)
 	return dsor;
 }
 
+/* Only needed on 1510 */
+static int set_uart_rate(struct clk * clk, unsigned long rate)
+{
+	unsigned int val;
+
+	val = omap_readl(clk->enable_reg);
+	if (rate == 12000000)
+		val &= ~(1 << clk->enable_bit);
+	else if (rate == 48000000)
+		val |= (1 << clk->enable_bit);
+	else
+		return -EINVAL;
+	omap_writel(val, clk->enable_reg);
+	clk->rate = rate;
+
+	return 0;
+}
 
 static int set_ext_clk_rate(struct clk *  clk, unsigned long rate)
 {
@@ -985,7 +1125,18 @@ void clk_unregister(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_unregister);
 
-
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+/*
+ * Resets some clocks that may be left on from bootloader,
+ * but leaves serial clocks on. See also omap_late_clk_reset().
+ */
+static inline void omap_early_clk_reset(void)
+{
+	//omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
+}
+#else
+#define omap_early_clk_reset()	{}
+#endif
 
 int __init clk_init(void)
 {
@@ -993,6 +1144,8 @@ int __init clk_init(void)
 	const struct omap_clock_config *info;
 	int crystal_type = 0; /* Default 12 MHz */
 
+	omap_early_clk_reset();
+
 	for (clkp = onchip_clks; clkp < onchip_clks+ARRAY_SIZE(onchip_clks); clkp++) {
 		if (((*clkp)->flags &CLOCK_IN_OMAP1510) && cpu_is_omap1510()) {
 			clk_register(*clkp);
@@ -1023,9 +1176,42 @@ int __init clk_init(void)
 		ck_ref.rate = 19200000;
 #endif
 
+	printk("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n",
+	       omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
+	       omap_readw(ARM_CKCTL));
+
 	/* We want to be in syncronous scalable mode */
 	omap_writew(0x1000, ARM_SYSST);
 
+#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER
+	/* Use values set by bootloader. Determine PLL rate and recalculate
+	 * dependent clocks as if kernel had changed PLL or divisors.
+	 */
+	{
+		unsigned pll_ctl_val = omap_readw(DPLL_CTL);
+
+		ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */
+		if (pll_ctl_val & 0x10) {
+			/* PLL enabled, apply multiplier and divisor */
+			if (pll_ctl_val & 0xf80)
+				ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7;
+			ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1;
+		} else {
+			/* PLL disabled, apply bypass divisor */
+			switch (pll_ctl_val & 0xc) {
+			case 0:
+				break;
+			case 0x4:
+				ck_dpll1.rate /= 2;
+				break;
+			default:
+				ck_dpll1.rate /= 4;
+				break;
+			}
+		}
+	}
+	propagate_rate(&ck_dpll1);
+#else
 	/* Find the highest supported frequency and enable it */
 	if (select_table_rate(&virtual_ck_mpu, ~0)) {
 		printk(KERN_ERR "System frequencies not set. Check your config.\n");
@@ -1034,12 +1220,13 @@ int __init clk_init(void)
 		omap_writew(0x1005, ARM_CKCTL);
 		ck_dpll1.rate = 60000000;
 		propagate_rate(&ck_dpll1);
-		printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): %ld/%ld/%ld\n",
-		       ck_ref.rate, ck_dpll1.rate, arm_ck.rate);
 	}
-
+#endif
 	/* Cache rates for clocks connected to ck_ref (not dpll1) */
 	propagate_rate(&ck_ref);
+	printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld/%ld MHz\n",
+	       ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
+	       ck_dpll1.rate, arm_ck.rate);
 
 #ifdef CONFIG_MACH_OMAP_PERSEUS2
 	/* Select slicer output as OMAP input clock */
@@ -1074,3 +1261,63 @@ int __init clk_init(void)
 
 	return 0;
 }
+
+
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+
+static int __init omap_late_clk_reset(void)
+{
+	/* Turn off all unused clocks */
+	struct clk *p;
+	__u32 regval32;
+
+	omap_writew(0, SOFT_REQ_REG);
+	omap_writew(0, SOFT_REQ_REG2);
+
+	list_for_each_entry(p, &clocks, node) {
+		if (p->usecount > 0 || (p->flags & ALWAYS_ENABLED) ||
+			p->enable_reg == 0)
+			continue;
+
+		/* Assume no DSP clocks have been activated by bootloader */
+		if (p->flags & DSP_DOMAIN_CLOCK)
+			continue;
+
+		/* Is the clock already disabled? */
+		if (p->flags & ENABLE_REG_32BIT) {
+			if (p->flags & VIRTUAL_IO_ADDRESS)
+				regval32 = __raw_readl(p->enable_reg);
+			else
+				regval32 = omap_readl(p->enable_reg);
+		} else {
+			if (p->flags & VIRTUAL_IO_ADDRESS)
+				regval32 = __raw_readw(p->enable_reg);
+			else
+				regval32 = omap_readw(p->enable_reg);
+		}
+
+		if ((regval32 & (1 << p->enable_bit)) == 0)
+			continue;
+
+		/* FIXME: This clock seems to be necessary but no-one
+		 * has asked for its activation. */
+		if (p == &tc2_ck         // FIX: pm.c (SRAM), CCP, Camera
+		    || p == &ck_dpll1out // FIX: SoSSI, SSR
+		    || p == &arm_gpio_ck // FIX: GPIO code for 1510
+		    ) {
+			printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n",
+			       p->name);
+			continue;
+		}
+
+		printk(KERN_INFO "Disabling unused clock \"%s\"... ", p->name);
+		__clk_disable(p);
+		printk(" done\n");
+	}
+
+	return 0;
+}
+
+late_initcall(omap_late_clk_reset);
+
+#endif
diff --git a/arch/arm/plat-omap/clock.h b/arch/arm/plat-omap/clock.h
index 08b504deb1a1..a89e1e8c2519 100644
--- a/arch/arm/plat-omap/clock.h
+++ b/arch/arm/plat-omap/clock.h
@@ -52,6 +52,8 @@ struct mpu_rate {
 #define CLOCK_IN_OMAP16XX	64
 #define CLOCK_IN_OMAP1510	128
 #define CLOCK_IN_OMAP730	256
+#define DSP_DOMAIN_CLOCK	512
+#define VIRTUAL_IO_ADDRESS	1024
 
 /* ARM_CKCTL bit shifts */
 #define CKCTL_PERDIV_OFFSET	0
@@ -63,6 +65,8 @@ struct mpu_rate {
 /*#define ARM_TIMXO		12*/
 #define EN_DSPCK		13
 /*#define ARM_INTHCK_SEL	14*/ /* Divide-by-2 for mpu inth_ck */
+/* DSP_CKCTL bit shifts */
+#define CKCTL_DSPPERDIV_OFFSET	0
 
 /* ARM_IDLECT1 bit shifts */
 /*#define IDLWDT_ARM	0*/
@@ -96,6 +100,9 @@ struct mpu_rate {
 #define EN_TC1_CK	2
 #define EN_TC2_CK	4
 
+/* DSP_IDLECT2 bit shifts (0,1,2 are same as for ARM_IDLECT2) */
+#define EN_DSPTIMCK	5
+
 /* Various register defines for clock controls scattered around OMAP chip */
 #define USB_MCLK_EN_BIT		4	/* In ULPD_CLKC_CTRL */
 #define USB_HOST_HHC_UHOST_EN	9	/* In MOD_CONF_CTRL_0 */
@@ -103,7 +110,8 @@ struct mpu_rate {
 #define COM_ULPD_PLL_CLK_REQ	1	/* In COM_CLK_DIV_CTRL_SEL */
 #define SWD_CLK_DIV_CTRL_SEL	0xfffe0874
 #define COM_CLK_DIV_CTRL_SEL	0xfffe0878
-
+#define SOFT_REQ_REG		0xfffe0834
+#define SOFT_REQ_REG2		0xfffe0880
 
 int clk_register(struct clk *clk);
 void clk_unregister(struct clk *clk);
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 015bd2cf869f..c0a5c2fa42bd 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -794,10 +794,6 @@ static void set_b1_regs(void)
 	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
 	/* Always set the source port as SDRAM for now*/
 	w &= ~(0x03 << 6);
-	if (lcd_dma.ext_ctrl)
-		w |= 1 << 8;
-	else
-		w &= ~(1 << 8);
 	if (lcd_dma.callback != NULL)
 		w |= 1 << 1;            /* Block interrupt enable */
 	else
@@ -889,9 +885,15 @@ void omap_enable_lcd_dma(void)
 	 */
 	if (enable_1510_mode || !lcd_dma.ext_ctrl)
 		return;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+	w |= 1 << 8;
+	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+
 	w = omap_readw(OMAP1610_DMA_LCD_CCR);
 	w |= 1 << 7;
 	omap_writew(w, OMAP1610_DMA_LCD_CCR);
+
 	lcd_dma.active = 1;
 }
 
@@ -922,10 +924,19 @@ void omap_setup_lcd_dma(void)
 
 void omap_stop_lcd_dma(void)
 {
+	u16 w;
+
 	lcd_dma.active = 0;
-	if (!enable_1510_mode && lcd_dma.ext_ctrl)
-		omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~(1 << 7),
-			    OMAP1610_DMA_LCD_CCR);
+	if (enable_1510_mode || !lcd_dma.ext_ctrl)
+		return;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CCR);
+	w &= ~(1 << 7);
+	omap_writew(w, OMAP1610_DMA_LCD_CCR);
+
+	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+	w &= ~(1 << 8);
+	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
 }
 
 /*
@@ -972,6 +983,25 @@ dma_addr_t omap_get_dma_dst_pos(int lch)
 			     (OMAP_DMA_CDSA_U(lch) << 16));
 }
 
+int omap_dma_running(void)
+{
+	int lch;
+
+	/* Check if LCD DMA is running */
+	if (cpu_is_omap16xx())
+		if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
+			return 1;
+
+	for (lch = 0; lch < dma_chan_count; lch++) {
+		u16 w;
+
+		w = omap_readw(OMAP_DMA_CCR(lch));
+		if (w & OMAP_DMA_CCR_EN)
+			return 1;
+	}
+	return 0;
+}
+
 static int __init omap_init_dma(void)
 {
 	int ch, r;
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 10c3f22f9c6a..43567d5edddb 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -66,6 +66,7 @@ struct omap_mcbsp {
 static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT];
 static struct clk *mcbsp_dsp_ck = 0;
 static struct clk *mcbsp_api_ck = 0;
+static struct clk *mcbsp_dspxor_ck = 0;
 
 
 static void omap_mcbsp_dump_reg(u8 id)
@@ -175,7 +176,7 @@ static int omap_mcbsp_check(unsigned int id)
 		return 0;
 	}
 
-	if (cpu_is_omap1510() || cpu_is_omap1610() || cpu_is_omap1710()) {
+	if (cpu_is_omap1510() || cpu_is_omap16xx()) {
 		if (id > OMAP_MAX_MCBSP_COUNT) {
 			printk(KERN_ERR "OMAP-McBSP: McBSP%d doesn't exist\n", id + 1);
 			return -1;
@@ -191,15 +192,12 @@ static int omap_mcbsp_check(unsigned int id)
 
 static void omap_mcbsp_dsp_request(void)
 {
-	if (cpu_is_omap1510() || cpu_is_omap1610() || cpu_is_omap1710()) {
-		omap_writew((omap_readw(ARM_RSTCT1) | (1 << 1) | (1 << 2)),
-			    ARM_RSTCT1);
-		clk_enable(mcbsp_dsp_ck);
-		clk_enable(mcbsp_api_ck);
+	if (cpu_is_omap1510() || cpu_is_omap16xx()) {
+		clk_use(mcbsp_dsp_ck);
+		clk_use(mcbsp_api_ck);
 
 		/* enable 12MHz clock to mcbsp 1 & 3 */
-		__raw_writew(__raw_readw(DSP_IDLECT2) | (1 << EN_XORPCK),
-			     DSP_IDLECT2);
+		clk_use(mcbsp_dspxor_ck);
 		__raw_writew(__raw_readw(DSP_RSTCT2) | 1 | 1 << 1,
 			     DSP_RSTCT2);
 	}
@@ -207,10 +205,13 @@ static void omap_mcbsp_dsp_request(void)
 
 static void omap_mcbsp_dsp_free(void)
 {
-	/* Useless for now */
+	if (cpu_is_omap1510() || cpu_is_omap16xx()) {
+		clk_unuse(mcbsp_dspxor_ck);
+		clk_unuse(mcbsp_dsp_ck);
+		clk_unuse(mcbsp_api_ck);
+	}
 }
 
-
 int omap_mcbsp_request(unsigned int id)
 {
 	int err;
@@ -350,6 +351,73 @@ void omap_mcbsp_stop(unsigned int id)
 }
 
 
+/* polled mcbsp i/o operations */
+int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
+{
+	u32 base = mcbsp[id].io_base;
+	writew(buf, base + OMAP_MCBSP_REG_DXR1);
+	/* if frame sync error - clear the error */
+	if (readw(base + OMAP_MCBSP_REG_SPCR2) & XSYNC_ERR) {
+		/* clear error */
+		writew(readw(base + OMAP_MCBSP_REG_SPCR2) & (~XSYNC_ERR),
+		       base + OMAP_MCBSP_REG_SPCR2);
+		/* resend */
+		return -1;
+	} else {
+		/* wait for transmit confirmation */
+		int attemps = 0;
+		while (!(readw(base + OMAP_MCBSP_REG_SPCR2) & XRDY)) {
+			if (attemps++ > 1000) {
+				writew(readw(base + OMAP_MCBSP_REG_SPCR2) &
+				       (~XRST),
+				       base + OMAP_MCBSP_REG_SPCR2);
+				udelay(10);
+				writew(readw(base + OMAP_MCBSP_REG_SPCR2) |
+				       (XRST),
+				       base + OMAP_MCBSP_REG_SPCR2);
+				udelay(10);
+				printk(KERN_ERR
+				       " Could not write to McBSP Register\n");
+				return -2;
+			}
+		}
+	}
+	return 0;
+}
+
+int omap_mcbsp_pollread(unsigned int id, u16 * buf)
+{
+	u32 base = mcbsp[id].io_base;
+	/* if frame sync error - clear the error */
+	if (readw(base + OMAP_MCBSP_REG_SPCR1) & RSYNC_ERR) {
+		/* clear error */
+		writew(readw(base + OMAP_MCBSP_REG_SPCR1) & (~RSYNC_ERR),
+		       base + OMAP_MCBSP_REG_SPCR1);
+		/* resend */
+		return -1;
+	} else {
+		/* wait for recieve confirmation */
+		int attemps = 0;
+		while (!(readw(base + OMAP_MCBSP_REG_SPCR1) & RRDY)) {
+			if (attemps++ > 1000) {
+				writew(readw(base + OMAP_MCBSP_REG_SPCR1) &
+				       (~RRST),
+				       base + OMAP_MCBSP_REG_SPCR1);
+				udelay(10);
+				writew(readw(base + OMAP_MCBSP_REG_SPCR1) |
+				       (RRST),
+				       base + OMAP_MCBSP_REG_SPCR1);
+				udelay(10);
+				printk(KERN_ERR
+				       " Could not read from McBSP Register\n");
+				return -2;
+			}
+		}
+	}
+	*buf = readw(base + OMAP_MCBSP_REG_DRR1);
+	return 0;
+}
+
 /*
  * IRQ based word transmission.
  */
@@ -625,10 +693,15 @@ static int __init omap_mcbsp_init(void)
 		return PTR_ERR(mcbsp_dsp_ck);
 	}
 	mcbsp_api_ck = clk_get(0, "api_ck");
-	if (IS_ERR(mcbsp_dsp_ck)) {
+	if (IS_ERR(mcbsp_api_ck)) {
 		printk(KERN_ERR "mcbsp: could not acquire api_ck handle.\n");
 		return PTR_ERR(mcbsp_api_ck);
 	}
+	mcbsp_dspxor_ck = clk_get(0, "dspxor_ck");
+	if (IS_ERR(mcbsp_dspxor_ck)) {
+		printk(KERN_ERR "mcbsp: could not acquire dspxor_ck handle.\n");
+		return PTR_ERR(mcbsp_dspxor_ck);
+	}
 
 #ifdef CONFIG_ARCH_OMAP730
 	if (cpu_is_omap730()) {
@@ -643,7 +716,7 @@ static int __init omap_mcbsp_init(void)
 	}
 #endif
 #if defined(CONFIG_ARCH_OMAP16XX)
-	if (cpu_is_omap1610() || cpu_is_omap1710()) {
+	if (cpu_is_omap16xx()) {
 		mcbsp_info = mcbsp_1610;
 		mcbsp_count = ARRAY_SIZE(mcbsp_1610);
 	}
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index cbecd10d0b6c..ea7b955b9c81 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -53,19 +53,13 @@ omap_cfg_reg(const reg_cfg_t reg_cfg)
 		return -EINVAL;
 	}
 
-	cfg = &reg_cfg_table[reg_cfg];
-
-	/*
-	 * We do a pretty long section here with lock on, but pin muxing
-	 * should only happen on driver init for each driver, so it's not time
-	 * critical.
-	 */
-	spin_lock_irqsave(&mux_spin_lock, flags);
+	cfg = (reg_cfg_set *)&reg_cfg_table[reg_cfg];
 
 	/* Check the mux register in question */
 	if (cfg->mux_reg) {
 		unsigned	tmp1, tmp2;
 
+		spin_lock_irqsave(&mux_spin_lock, flags);
 		reg_orig = omap_readl(cfg->mux_reg);
 
 		/* The mux registers always seem to be 3 bits long */
@@ -80,11 +74,13 @@ omap_cfg_reg(const reg_cfg_t reg_cfg)
 			warn = 1;
 
 		omap_writel(reg, cfg->mux_reg);
+		spin_unlock_irqrestore(&mux_spin_lock, flags);
 	}
 
 	/* Check for pull up or pull down selection on 1610 */
 	if (!cpu_is_omap1510()) {
 		if (cfg->pu_pd_reg && cfg->pull_val) {
+			spin_lock_irqsave(&mux_spin_lock, flags);
 			pu_pd_orig = omap_readl(cfg->pu_pd_reg);
 			mask = 1 << cfg->pull_bit;
 
@@ -100,11 +96,13 @@ omap_cfg_reg(const reg_cfg_t reg_cfg)
 				pu_pd = pu_pd_orig & ~mask;
 			}
 			omap_writel(pu_pd, cfg->pu_pd_reg);
+			spin_unlock_irqrestore(&mux_spin_lock, flags);
 		}
 	}
 
 	/* Check for an associated pull down register */
 	if (cfg->pull_reg) {
+		spin_lock_irqsave(&mux_spin_lock, flags);
 		pull_orig = omap_readl(cfg->pull_reg);
 		mask = 1 << cfg->pull_bit;
 
@@ -121,6 +119,7 @@ omap_cfg_reg(const reg_cfg_t reg_cfg)
 		}
 
 		omap_writel(pull, cfg->pull_reg);
+		spin_unlock_irqrestore(&mux_spin_lock, flags);
 	}
 
 	if (warn) {
@@ -149,8 +148,6 @@ omap_cfg_reg(const reg_cfg_t reg_cfg)
 	}
 #endif
 
-	spin_unlock_irqrestore(&mux_spin_lock, flags);
-
 #ifdef CONFIG_OMAP_MUX_ERRORS
 	return warn ? -ETXTBSY : 0;
 #else
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index ab38e4eb3130..25bc4a8dd763 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -326,7 +326,7 @@ static u64 ohci_dmamask = ~(u32)0;
 static struct resource ohci_resources[] = {
 	{
 		.start	= OMAP_OHCI_BASE,
-		.end	= OMAP_OHCI_BASE + 4096,
+		.end	= OMAP_OHCI_BASE + 4096 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{