summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
authorPaul Walmsley <paul@pwsan.com>2010-01-08 15:23:15 -0700
committerPaul Walmsley <paul@pwsan.com>2010-01-08 15:23:15 -0700
commitca6eccb31ef63722b35ea695f75089adeec319d7 (patch)
treec88b9a6500b855343fa9b62429e1182c311d3fd7 /arch/arm
parent19fe458310915a216bbba32a210b6f29ac7c929f (diff)
OMAP2xxx OPP: clean up comments in OPP data
Revise some of the comments in the OMAP2xxx OPP data for clarity. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/mach-omap2/opp2420_data.c38
-rw-r--r--arch/arm/mach-omap2/opp2430_data.c30
2 files changed, 35 insertions, 33 deletions
diff --git a/arch/arm/mach-omap2/opp2420_data.c b/arch/arm/mach-omap2/opp2420_data.c
index 126a9396b3a8..e6dda694fd5c 100644
--- a/arch/arm/mach-omap2/opp2420_data.c
+++ b/arch/arm/mach-omap2/opp2420_data.c
@@ -9,45 +9,47 @@
* The OMAP2 processor can be run at several discrete 'PRCM configurations'.
* These configurations are characterized by voltage and speed for clocks.
* The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratio's' which the clocks operate with
+ * these combinations is via the 'ratios' which the clocks operate with
* respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio
- * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
- *
- * 2430 differs from 2420 in that there are no more phase synchronizers used.
- * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
- * 2430 (iva2.1, NOdsp, mdm)
+ * setting. All configurations can be described by a DPLL setting and a ratio.
*
* XXX Missing voltage data.
+ * XXX Missing 19.2MHz sys_clk rate sets (needed for N800/N810)
*
* THe format described in this file is deprecated. Once a reasonable
* OPP API exists, the data in this file should be converted to use it.
*
* This is technically part of the OMAP2xxx clock code.
+ *
+ * Considerable work is still needed to fully support dynamic frequency
+ * changes on OMAP2xxx-series chips. Readers interested in such a
+ * project are encouraged to review the Maemo Diablo RX-34 and RX-44
+ * kernel source at:
+ * http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/
*/
#include "opp2xxx.h"
#include "sdrc.h"
#include "clock.h"
-/*-------------------------------------------------------------------------
- * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+/*
+ * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
* xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
* CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
* CM_CLKSEL2_PLL, CM_CLKSEL_MDM
*
- * Filling in table based on H4 boards and 2430-SDPs variants available.
- * There are quite a few more rates combinations which could be defined.
+ * Filling in table based on H4 boards available. There are quite a
+ * few more rate combinations which could be defined.
*
- * When multiple values are defined the start up will try and choose the
- * fastest one. If a 'fast' value is defined, then automatically, the /2
- * one should be included as it can be used. Generally having more that
- * one fast set does not make sense, as static timings need to be changed
- * to change the set. The exception is the bypass setting which is
- * availble for low power bypass.
+ * When multiple values are defined the start up will try and choose
+ * the fastest one. If a 'fast' value is defined, then automatically,
+ * the /2 one should be included as it can be used. Generally having
+ * more than one fast set does not make sense, as static timings need
+ * to be changed to change the set. The exception is the bypass
+ * setting which is available for low power bypass.
*
* Note: This table needs to be sorted, fastest to slowest.
- *-------------------------------------------------------------------------*/
+ **/
const struct prcm_config omap2420_rate_table[] = {
/* PRCM I - FAST */
{S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c
index edb81672c844..1b9596ae201e 100644
--- a/arch/arm/mach-omap2/opp2430_data.c
+++ b/arch/arm/mach-omap2/opp2430_data.c
@@ -1,5 +1,5 @@
/*
- * opp2420_data.c - old-style "OPP" table for OMAP2420
+ * opp2430_data.c - old-style "OPP" table for OMAP2430
*
* Copyright (C) 2005-2009 Texas Instruments, Inc.
* Copyright (C) 2004-2009 Nokia Corporation
@@ -9,16 +9,16 @@
* The OMAP2 processor can be run at several discrete 'PRCM configurations'.
* These configurations are characterized by voltage and speed for clocks.
* The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratio's' which the clocks operate with
+ * these combinations is via the 'ratios' which the clocks operate with
* respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio
- * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
+ * setting. All configurations can be described by a DPLL setting and a ratio.
*
* 2430 differs from 2420 in that there are no more phase synchronizers used.
* They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
* 2430 (iva2.1, NOdsp, mdm)
*
* XXX Missing voltage data.
+ * XXX Missing 19.2MHz sys_clk rate sets.
*
* THe format described in this file is deprecated. Once a reasonable
* OPP API exists, the data in this file should be converted to use it.
@@ -30,24 +30,24 @@
#include "sdrc.h"
#include "clock.h"
-/*-------------------------------------------------------------------------
- * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+/*
+ * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
* xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
* CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
* CM_CLKSEL2_PLL, CM_CLKSEL_MDM
*
- * Filling in table based on H4 boards and 2430-SDPs variants available.
- * There are quite a few more rates combinations which could be defined.
+ * Filling in table based on 2430-SDPs variants available. There are
+ * quite a few more rate combinations which could be defined.
*
- * When multiple values are defined the start up will try and choose the
- * fastest one. If a 'fast' value is defined, then automatically, the /2
- * one should be included as it can be used. Generally having more that
- * one fast set does not make sense, as static timings need to be changed
- * to change the set. The exception is the bypass setting which is
- * availble for low power bypass.
+ * When multiple values are defined the start up will try and choose
+ * the fastest one. If a 'fast' value is defined, then automatically,
+ * the /2 one should be included as it can be used. Generally having
+ * more than one fast set does not make sense, as static timings need
+ * to be changed to change the set. The exception is the bypass
+ * setting which is available for low power bypass.
*
* Note: This table needs to be sorted, fastest to slowest.
- *-------------------------------------------------------------------------*/
+ */
const struct prcm_config omap2430_rate_table[] = {
/* PRCM #4 - ratio2 (ES2.1) - FAST */
{S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */