summaryrefslogtreecommitdiff
path: root/arch/arm
diff options
context:
space:
mode:
authorAndrew Lunn <andrew@lunn.ch>2014-09-01 19:35:41 +0200
committerJason Cooper <jason@lakedaemon.net>2014-09-13 21:03:48 +0000
commit4f5e01e96d424b54f5f0e89ee1ba9ccca03a3941 (patch)
treecbd14ae3267554ddb788f4ba1d9ae8e0834c1040 /arch/arm
parent500abb6ccb9e3f8d638a7f422443a8549245ef90 (diff)
ARM: Kirkwood: Fix DT based DSA.
During the conversion of boards to use DT to instantiate Distributed Switch Architecture, nobody volunteered to test. As to be expected, the conversion was flawed. Testers and access to hardware has now become available, and this patch hopefully fixes the problems. dsa,mii-bus must be a phandle to the top level mdio node, not the port specific subnode of the mdio device. dsa,ethernet must be a phandle to the port subnode within the ethernet DT node, not the ethernet node. Don't pinctrl hog the card detect gpio for mvsdio. Rename the .dts files to make it clearer which file is for the Z0 stepping and which for the A0 or later stepping. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Cc: seugene@marvell.com Tested-by: Eugene Sanivsky <seugene@marvell.com> Fixes: e2eaa339af44: ("ARM: Kirkwood: convert rd88f6281-setup.c to DT.") Fixes: e7c8f3808be8: ("ARM: kirkwood: Convert mv88f6281gtw_ge switch setup to DT") Cc: <stable@vger.kernel.org> #v3.15+ Link: https://lkml.kernel.org/r/1409592941-22244-1-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/boot/dts/Makefile4
-rw-r--r--arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts16
-rw-r--r--arch/arm/boot/dts/kirkwood-rd88f6281-a.dts43
-rw-r--r--arch/arm/boot/dts/kirkwood-rd88f6281-a0.dts26
-rw-r--r--arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts (renamed from arch/arm/boot/dts/kirkwood-rd88f6281-a1.dts)18
-rw-r--r--arch/arm/boot/dts/kirkwood-rd88f6281.dtsi27
-rw-r--r--arch/arm/boot/dts/kirkwood.dtsi4
7 files changed, 69 insertions, 69 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b8c5cd3ddeb9..e6aa6e77a3ec 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -144,8 +144,8 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \
kirkwood-openrd-client.dtb \
kirkwood-openrd-ultimate.dtb \
kirkwood-rd88f6192.dtb \
- kirkwood-rd88f6281-a0.dtb \
- kirkwood-rd88f6281-a1.dtb \
+ kirkwood-rd88f6281-z0.dtb \
+ kirkwood-rd88f6281-a.dtb \
kirkwood-rs212.dtb \
kirkwood-rs409.dtb \
kirkwood-rs411.dtb \
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
index 8f76d28759a3..f82827d6fcff 100644
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -123,11 +123,11 @@
dsa@0 {
compatible = "marvell,dsa";
- #address-cells = <2>;
+ #address-cells = <1>;
#size-cells = <0>;
- dsa,ethernet = <&eth0>;
- dsa,mii-bus = <&ethphy0>;
+ dsa,ethernet = <&eth0port>;
+ dsa,mii-bus = <&mdio>;
switch@0 {
#address-cells = <1>;
@@ -169,17 +169,13 @@
&mdio {
status = "okay";
-
- ethphy0: ethernet-phy@ff {
- reg = <0xff>; /* No phy attached */
- speed = <1000>;
- duplex = <1>;
- };
};
&eth0 {
status = "okay";
+
ethernet0-port@0 {
- phy-handle = <&ethphy0>;
+ speed = <1000>;
+ duplex = <1>;
};
};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts
new file mode 100644
index 000000000000..f2e08b3b33ea
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281-a.dts
@@ -0,0 +1,43 @@
+/*
+ * Marvell RD88F6181 A Board descrition
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file contains the definitions for the board with the A0 or
+ * higher stepping of the SoC. The ethernet switch does not have a
+ * "wan" port.
+ */
+
+/dts-v1/;
+#include "kirkwood-rd88f6281.dtsi"
+
+/ {
+ model = "Marvell RD88f6281 Reference design, with A0 or higher SoC";
+ compatible = "marvell,rd88f6281-a", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ dsa@0 {
+ switch@0 {
+ reg = <10 0>; /* MDIO address 10, switch 0 in tree */
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy1: ethernet-phy@11 {
+ reg = <11>;
+ };
+};
+
+&eth1 {
+ status = "okay";
+
+ ethernet1-port@0 {
+ phy-handle = <&ethphy1>;
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a0.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-a0.dts
deleted file mode 100644
index a803bbb70bc8..000000000000
--- a/arch/arm/boot/dts/kirkwood-rd88f6281-a0.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Marvell RD88F6181 A0 Board descrition
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * This file contains the definitions for the board with the A0 variant of
- * the SoC. The ethernet switch does not have a "wan" port.
- */
-
-/dts-v1/;
-#include "kirkwood-rd88f6281.dtsi"
-
-/ {
- model = "Marvell RD88f6281 Reference design, with A0 SoC";
- compatible = "marvell,rd88f6281-a0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- dsa@0 {
- switch@0 {
- reg = <10 0>; /* MDIO address 10, switch 0 in tree */
- };
- };
-}; \ No newline at end of file
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281-a1.dts b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
index baeebbf1d8c7..f4272b64ed7f 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281-a1.dts
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts
@@ -1,5 +1,5 @@
/*
- * Marvell RD88F6181 A1 Board descrition
+ * Marvell RD88F6181 Z0 stepping descrition
*
* Andrew Lunn <andrew@lunn.ch>
*
@@ -7,17 +7,17 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
- * This file contains the definitions for the board with the A1 variant of
- * the SoC. The ethernet switch has a "wan" port.
- */
+ * This file contains the definitions for the board using the Z0
+ * stepping of the SoC. The ethernet switch has a "wan" port.
+*/
/dts-v1/;
#include "kirkwood-rd88f6281.dtsi"
/ {
- model = "Marvell RD88f6281 Reference design, with A1 SoC";
- compatible = "marvell,rd88f6281-a1", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
+ model = "Marvell RD88f6281 Reference design, with Z0 SoC";
+ compatible = "marvell,rd88f6281-z0", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
dsa@0 {
switch@0 {
@@ -28,4 +28,8 @@
};
};
};
-}; \ No newline at end of file
+};
+
+&eth1 {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
index 26cf0e0ccefd..d195e884b3b5 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
@@ -37,7 +37,6 @@
ocp@f1000000 {
pinctrl: pin-controller@10000 {
- pinctrl-0 = <&pmx_sdio_cd>;
pinctrl-names = "default";
pmx_sdio_cd: pmx-sdio-cd {
@@ -69,8 +68,8 @@
#address-cells = <2>;
#size-cells = <0>;
- dsa,ethernet = <&eth0>;
- dsa,mii-bus = <&ethphy1>;
+ dsa,ethernet = <&eth0port>;
+ dsa,mii-bus = <&mdio>;
switch@0 {
#address-cells = <1>;
@@ -119,35 +118,19 @@
};
partition@300000 {
- label = "data";
+ label = "rootfs";
reg = <0x0300000 0x500000>;
};
};
&mdio {
status = "okay";
-
- ethphy0: ethernet-phy@0 {
- reg = <0>;
- };
-
- ethphy1: ethernet-phy@ff {
- reg = <0xff>; /* No PHY attached */
- speed = <1000>;
- duple = <1>;
- };
};
&eth0 {
status = "okay";
ethernet0-port@0 {
- phy-handle = <&ethphy0>;
- };
-};
-
-&eth1 {
- status = "okay";
- ethernet1-port@0 {
- phy-handle = <&ethphy1>;
+ speed = <1000>;
+ duplex = <1>;
};
};
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index afc640cd80c5..464f09a1a4a5 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -309,7 +309,7 @@
marvell,tx-checksum-limit = <1600>;
status = "disabled";
- ethernet0-port@0 {
+ eth0port: ethernet0-port@0 {
compatible = "marvell,kirkwood-eth-port";
reg = <0>;
interrupts = <11>;
@@ -342,7 +342,7 @@
pinctrl-names = "default";
status = "disabled";
- ethernet1-port@0 {
+ eth1port: ethernet1-port@0 {
compatible = "marvell,kirkwood-eth-port";
reg = <0>;
interrupts = <15>;