Blackfin: unify duplicated power masks

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

1 files changed, 104 insertions, 3 deletions

diff --git a/arch/blackfin/include/asm/dpmc.h b/arch/blackfin/include/asm/dpmc.h
index 925e66cb2d49..1597ae5041ee 100644
--- a/arch/blackfin/include/asm/dpmc.h
+++ b/arch/blackfin/include/asm/dpmc.h
@@ -1,7 +1,7 @@
 /*
  * Miscellaneous IOCTL commands for Dynamic Power Management Controller Driver
  *
- * Copyright (C) 2004-2008 Analog Device Inc.
+ * Copyright (C) 2004-2009 Analog Device Inc.
  *
  * Licensed under the GPL-2
  */
@@ -9,7 +9,109 @@
 #ifndef _BLACKFIN_DPMC_H_
 #define _BLACKFIN_DPMC_H_
 
-#ifdef __KERNEL__
+/* PLL_CTL Masks */
+#define DF			0x0001	/* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
+#define PLL_OFF			0x0002	/* PLL Not Powered */
+#define STOPCK			0x0008	/* Core Clock Off */
+#define PDWN			0x0020	/* Enter Deep Sleep Mode */
+#ifdef __ADSPBF539__
+# define IN_DELAY		0x0014	/* Add 200ps Delay To EBIU Input Latches */
+# define OUT_DELAY		0x00C0	/* Add 200ps Delay To EBIU Output Signals */
+#else
+# define IN_DELAY		0x0040	/* Add 200ps Delay To EBIU Input Latches */
+# define OUT_DELAY		0x0080	/* Add 200ps Delay To EBIU Output Signals */
+#endif
+#define BYPASS			0x0100	/* Bypass the PLL */
+#define MSEL			0x7E00	/* Multiplier Select For CCLK/VCO Factors */
+#define SPORT_HYST		0x8000	/* Enable Additional Hysteresis on SPORT Input Pins */
+#define SET_MSEL(x)		(((x)&0x3F) << 0x9)	/* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
+
+/* PLL_DIV Masks */
+#define SSEL			0x000F	/* System Select */
+#define CSEL			0x0030	/* Core Select */
+#define CSEL_DIV1		0x0000	/* CCLK = VCO / 1 */
+#define CSEL_DIV2		0x0010	/* CCLK = VCO / 2 */
+#define CSEL_DIV4		0x0020	/* CCLK = VCO / 4 */
+#define CSEL_DIV8		0x0030	/* CCLK = VCO / 8 */
+
+#define CCLK_DIV1 CSEL_DIV1
+#define CCLK_DIV2 CSEL_DIV2
+#define CCLK_DIV4 CSEL_DIV4
+#define CCLK_DIV8 CSEL_DIV8
+
+#define SET_SSEL(x)	((x) & 0xF)	/* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
+#define SCLK_DIV(x)	(x)		/* SCLK = VCO / x */
+
+/* PLL_STAT Masks */
+#define ACTIVE_PLLENABLED	0x0001	/* Processor In Active Mode With PLL Enabled */
+#define FULL_ON			0x0002	/* Processor In Full On Mode */
+#define ACTIVE_PLLDISABLED	0x0004	/* Processor In Active Mode With PLL Disabled */
+#define PLL_LOCKED		0x0020	/* PLL_LOCKCNT Has Been Reached */
+
+#define RTCWS			0x0400	/* RTC/Reset Wake-Up Status */
+#define CANWS			0x0800	/* CAN Wake-Up Status */
+#define USBWS			0x2000	/* USB Wake-Up Status */
+#define KPADWS			0x4000	/* Keypad Wake-Up Status */
+#define ROTWS			0x8000	/* Rotary Wake-Up Status */
+#define GPWS			0x1000	/* General-Purpose Wake-Up Status */
+
+/* VR_CTL Masks */
+#if defined(__ADSPBF52x__) || defined(__ADSPBF51x__)
+#define FREQ			0x3000	/* Switching Oscillator Frequency For Regulator */
+#define FREQ_1000		0x3000	/* Switching Frequency Is 1 MHz */
+#else
+#define FREQ			0x0003	/* Switching Oscillator Frequency For Regulator */
+#define FREQ_333		0x0001	/* Switching Frequency Is 333 kHz */
+#define FREQ_667		0x0002	/* Switching Frequency Is 667 kHz */
+#define FREQ_1000		0x0003	/* Switching Frequency Is 1 MHz */
+#endif
+#define HIBERNATE		0x0000	/* Powerdown/Bypass On-Board Regulation */
+
+#define GAIN			0x000C	/* Voltage Level Gain */
+#define GAIN_5			0x0000	/* GAIN = 5 */
+#define GAIN_10			0x0004	/* GAIN = 1 */
+#define GAIN_20			0x0008	/* GAIN = 2 */
+#define GAIN_50			0x000C	/* GAIN = 5 */
+
+#define VLEV			0x00F0	/* Internal Voltage Level */
+#ifdef __ADSPBF52x__
+#define VLEV_085 		0x0040	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_090		0x0050	/* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define VLEV_095		0x0060	/* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define VLEV_100		0x0070	/* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define VLEV_105		0x0080	/* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define VLEV_110		0x0090	/* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define VLEV_115		0x00A0	/* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define VLEV_120		0x00B0	/* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#else
+#define VLEV_085 		0x0060	/* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_090		0x0070	/* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define VLEV_095		0x0080	/* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define VLEV_100		0x0090	/* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define VLEV_105		0x00A0	/* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define VLEV_110		0x00B0	/* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define VLEV_115		0x00C0	/* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define VLEV_120		0x00D0	/* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#define VLEV_125		0x00E0	/* VLEV = 1.25 V (-5% - +10% Accuracy) */
+#define VLEV_130		0x00F0	/* VLEV = 1.30 V (-5% - +10% Accuracy) */
+#endif
+
+#define WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate */
+#define CANWE			0x0200	/* Enable CAN Wakeup From Hibernate */
+#define PHYWE			0x0400	/* Enable PHY Wakeup From Hibernate */
+#define GPWE			0x0400	/* General-Purpose Wake-Up Enable */
+#define MXVRWE			0x0400	/* Enable MXVR Wakeup From Hibernate */
+#define KPADWE			0x1000	/* Keypad Wake-Up Enable */
+#define ROTWE			0x2000	/* Rotary Wake-Up Enable */
+#define CLKBUFOE		0x4000	/* CLKIN Buffer Output Enable */
+#define SCKELOW			0x8000	/* Do Not Drive SCKE High During Reset After Hibernate */
+
+#if defined(__ADSPBF52x__) || defined(__ADSPBF51x__)
+#define USBWE			0x0200	/* Enable USB Wakeup From Hibernate */
+#else
+#define USBWE			0x0800	/* Enable USB Wakeup From Hibernate */
+#endif
+
 #ifndef __ASSEMBLY__
 
 void sleep_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
@@ -54,6 +156,5 @@ struct bfin_dpmc_platform_data {
 	w[P0 + (x - PLL_CTL)] = R0;\
 
 #endif
-#endif	/* __KERNEL__ */
 
 #endif	/*_BLACKFIN_DPMC_H_*/