Merge tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pul removal of obsolete architecture ports from Arnd Bergmann:
 "This removes the entire architecture code for blackfin, cris, frv,
  m32r, metag, mn10300, score, and tile, including the associated device
  drivers.

  I have been working with the (former) maintainers for each one to
  ensure that my interpretation was right and the code is definitely
  unused in mainline kernels. Many had fond memories of working on the
  respective ports to start with and getting them included in upstream,
  but also saw no point in keeping the port alive without any users.

  In the end, it seems that while the eight architectures are extremely
  different, they all suffered the same fate: There was one company in
  charge of an SoC line, a CPU microarchitecture and a software
  ecosystem, which was more costly than licensing newer off-the-shelf
  CPU cores from a third party (typically ARM, MIPS, or RISC-V). It
  seems that all the SoC product lines are still around, but have not
  used the custom CPU architectures for several years at this point. In
  contrast, CPU instruction sets that remain popular and have actively
  maintained kernel ports tend to all be used across multiple licensees.

  [ See the new nds32 port merged in the previous commit for the next
    generation of "one company in charge of an SoC line, a CPU
    microarchitecture and a software ecosystem"   - Linus ]

  The removal came out of a discussion that is now documented at
  https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
  marking any ports as deprecated but remove them all at once after I
  made sure that they are all unused. Some architectures (notably tile,
  mn10300, and blackfin) are still being shipped in products with old
  kernels, but those products will never be updated to newer kernel
  releases.

  After this series, we still have a few architectures without mainline
  gcc support:

   - unicore32 and hexagon both have very outdated gcc releases, but the
     maintainers promised to work on providing something newer. At least
     in case of hexagon, this will only be llvm, not gcc.

   - openrisc, risc-v and nds32 are still in the process of finishing
     their support or getting it added to mainline gcc in the first
     place. They all have patched gcc-7.3 ports that work to some
     degree, but complete upstream support won't happen before gcc-8.1.
     Csky posted their first kernel patch set last week, their situation
     will be similar

  [ Palmer Dabbelt points out that RISC-V support is in mainline gcc
    since gcc-7, although gcc-7.3.0 is the recommended minimum  - Linus ]"

This really says it all:

 2498 files changed, 95 insertions(+), 467668 deletions(-)

* tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits)
  MAINTAINERS: UNICORE32: Change email account
  staging: iio: remove iio-trig-bfin-timer driver
  tty: hvc: remove tile driver
  tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers
  serial: remove tile uart driver
  serial: remove m32r_sio driver
  serial: remove blackfin drivers
  serial: remove cris/etrax uart drivers
  usb: Remove Blackfin references in USB support
  usb: isp1362: remove blackfin arch glue
  usb: musb: remove blackfin port
  usb: host: remove tilegx platform glue
  pwm: remove pwm-bfin driver
  i2c: remove bfin-twi driver
  spi: remove blackfin related host drivers
  watchdog: remove bfin_wdt driver
  can: remove bfin_can driver
  mmc: remove bfin_sdh driver
  input: misc: remove blackfin rotary driver
  input: keyboard: remove bf54x driver
  ...

1 files changed, 0 insertions, 987 deletions

diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c
deleted file mode 100644
index 1b6a52ad8a0e..000000000000
--- a/arch/blackfin/mach-bf538/boards/ezkit.c
+++ /dev/null
@@ -1,987 +0,0 @@
-/*
- * Copyright 2004-2009 Analog Devices Inc.
- *                2005 National ICT Australia (NICTA)
- *                      Aidan Williams <aidan@nicta.com.au>
- *
- * Licensed under the GPL-2
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/dma.h>
-#include <asm/nand.h>
-#include <asm/portmux.h>
-#include <asm/dpmc.h>
-#include <linux/input.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "ADI BF538-EZKIT";
-
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-
-
-#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
-static struct platform_device rtc_device = {
-	.name = "rtc-bfin",
-	.id   = -1,
-};
-#endif	/* CONFIG_RTC_DRV_BFIN */
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-static struct resource bfin_uart0_resources[] = {
-	{
-		.start = UART0_THR,
-		.end = UART0_GCTL+2,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_TX,
-		.end = IRQ_UART0_TX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART0_ERROR,
-		.end = IRQ_UART0_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_TX,
-		.end = CH_UART0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-#ifdef CONFIG_BFIN_UART0_CTSRTS
-	{	/* CTS pin */
-		.start = GPIO_PG7,
-		.end = GPIO_PG7,
-		.flags = IORESOURCE_IO,
-	},
-	{	/* RTS pin */
-		.start = GPIO_PG6,
-		.end = GPIO_PG6,
-		.flags = IORESOURCE_IO,
-	},
-#endif
-};
-
-static unsigned short bfin_uart0_peripherals[] = {
-	P_UART0_TX, P_UART0_RX, 0
-};
-
-static struct platform_device bfin_uart0_device = {
-	.name = "bfin-uart",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
-	.resource = bfin_uart0_resources,
-	.dev = {
-		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
-	},
-};
-#endif	/* CONFIG_SERIAL_BFIN_UART0 */
-#ifdef CONFIG_SERIAL_BFIN_UART1
-static struct resource bfin_uart1_resources[] = {
-	{
-		.start = UART1_THR,
-		.end = UART1_GCTL+2,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART1_TX,
-		.end = IRQ_UART1_TX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART1_ERROR,
-		.end = IRQ_UART1_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART1_TX,
-		.end = CH_UART1_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = CH_UART1_RX,
-		.end = CH_UART1_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static unsigned short bfin_uart1_peripherals[] = {
-	P_UART1_TX, P_UART1_RX, 0
-};
-
-static struct platform_device bfin_uart1_device = {
-	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart1_resources),
-	.resource = bfin_uart1_resources,
-	.dev = {
-		.platform_data = &bfin_uart1_peripherals, /* Passed to driver */
-	},
-};
-#endif	/* CONFIG_SERIAL_BFIN_UART1 */
-#ifdef CONFIG_SERIAL_BFIN_UART2
-static struct resource bfin_uart2_resources[] = {
-	{
-		.start = UART2_THR,
-		.end = UART2_GCTL+2,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART2_TX,
-		.end = IRQ_UART2_TX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART2_RX,
-		.end = IRQ_UART2_RX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART2_ERROR,
-		.end = IRQ_UART2_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART2_TX,
-		.end = CH_UART2_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = CH_UART2_RX,
-		.end = CH_UART2_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static unsigned short bfin_uart2_peripherals[] = {
-	P_UART2_TX, P_UART2_RX, 0
-};
-
-static struct platform_device bfin_uart2_device = {
-	.name = "bfin-uart",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(bfin_uart2_resources),
-	.resource = bfin_uart2_resources,
-	.dev = {
-		.platform_data = &bfin_uart2_peripherals, /* Passed to driver */
-	},
-};
-#endif	/* CONFIG_SERIAL_BFIN_UART2 */
-#endif	/* CONFIG_SERIAL_BFIN */
-
-#if IS_ENABLED(CONFIG_BFIN_SIR)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-static struct platform_device bfin_sir0_device = {
-	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
-	.resource = bfin_sir0_resources,
-};
-#endif	/* CONFIG_BFIN_SIR0 */
-#ifdef CONFIG_BFIN_SIR1
-static struct resource bfin_sir1_resources[] = {
-	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART1_RX,
-		.end = CH_UART1_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-static struct platform_device bfin_sir1_device = {
-	.name = "bfin_sir",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
-	.resource = bfin_sir1_resources,
-};
-#endif	/* CONFIG_BFIN_SIR1 */
-#ifdef CONFIG_BFIN_SIR2
-static struct resource bfin_sir2_resources[] = {
-	{
-		.start = 0xFFC02100,
-		.end = 0xFFC021FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART2_RX,
-		.end = IRQ_UART2_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART2_RX,
-		.end = CH_UART2_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-static struct platform_device bfin_sir2_device = {
-	.name = "bfin_sir",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(bfin_sir2_resources),
-	.resource = bfin_sir2_resources,
-};
-#endif	/* CONFIG_BFIN_SIR2 */
-#endif	/* CONFIG_BFIN_SIR */
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-static struct resource bfin_sport0_uart_resources[] = {
-	{
-		.start = SPORT0_TCR1,
-		.end = SPORT0_MRCS3+4,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_SPORT0_RX,
-		.end = IRQ_SPORT0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT0_ERROR,
-		.end = IRQ_SPORT0_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static unsigned short bfin_sport0_peripherals[] = {
-	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
-	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
-};
-
-static struct platform_device bfin_sport0_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
-	.resource = bfin_sport0_uart_resources,
-	.dev = {
-		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
-	},
-};
-#endif	/* CONFIG_SERIAL_BFIN_SPORT0_UART */
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-static struct resource bfin_sport1_uart_resources[] = {
-	{
-		.start = SPORT1_TCR1,
-		.end = SPORT1_MRCS3+4,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_SPORT1_RX,
-		.end = IRQ_SPORT1_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT1_ERROR,
-		.end = IRQ_SPORT1_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static unsigned short bfin_sport1_peripherals[] = {
-	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
-	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
-};
-
-static struct platform_device bfin_sport1_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
-	.resource = bfin_sport1_uart_resources,
-	.dev = {
-		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
-	},
-};
-#endif	/* CONFIG_SERIAL_BFIN_SPORT1_UART */
-#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
-static struct resource bfin_sport2_uart_resources[] = {
-	{
-		.start = SPORT2_TCR1,
-		.end = SPORT2_MRCS3+4,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_SPORT2_RX,
-		.end = IRQ_SPORT2_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT2_ERROR,
-		.end = IRQ_SPORT2_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static unsigned short bfin_sport2_peripherals[] = {
-	P_SPORT2_TFS, P_SPORT2_DTPRI, P_SPORT2_TSCLK, P_SPORT2_RFS,
-	P_SPORT2_DRPRI, P_SPORT2_RSCLK, P_SPORT2_DRSEC, P_SPORT2_DTSEC, 0
-};
-
-static struct platform_device bfin_sport2_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(bfin_sport2_uart_resources),
-	.resource = bfin_sport2_uart_resources,
-	.dev = {
-		.platform_data = &bfin_sport2_peripherals, /* Passed to driver */
-	},
-};
-#endif	/* CONFIG_SERIAL_BFIN_SPORT2_UART */
-#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
-static struct resource bfin_sport3_uart_resources[] = {
-	{
-		.start = SPORT3_TCR1,
-		.end = SPORT3_MRCS3+4,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_SPORT3_RX,
-		.end = IRQ_SPORT3_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT3_ERROR,
-		.end = IRQ_SPORT3_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static unsigned short bfin_sport3_peripherals[] = {
-	P_SPORT3_TFS, P_SPORT3_DTPRI, P_SPORT3_TSCLK, P_SPORT3_RFS,
-	P_SPORT3_DRPRI, P_SPORT3_RSCLK, P_SPORT3_DRSEC, P_SPORT3_DTSEC, 0
-};
-
-static struct platform_device bfin_sport3_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 3,
-	.num_resources = ARRAY_SIZE(bfin_sport3_uart_resources),
-	.resource = bfin_sport3_uart_resources,
-	.dev = {
-		.platform_data = &bfin_sport3_peripherals, /* Passed to driver */
-	},
-};
-#endif	/* CONFIG_SERIAL_BFIN_SPORT3_UART */
-#endif	/* CONFIG_SERIAL_BFIN_SPORT */
-
-#if IS_ENABLED(CONFIG_CAN_BFIN)
-static unsigned short bfin_can_peripherals[] = {
-	P_CAN0_RX, P_CAN0_TX, 0
-};
-
-static struct resource bfin_can_resources[] = {
-	{
-		.start = 0xFFC02A00,
-		.end = 0xFFC02FFF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_CAN_RX,
-		.end = IRQ_CAN_RX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_CAN_TX,
-		.end = IRQ_CAN_TX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_CAN_ERROR,
-		.end = IRQ_CAN_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_can_device = {
-	.name = "bfin_can",
-	.num_resources = ARRAY_SIZE(bfin_can_resources),
-	.resource = bfin_can_resources,
-	.dev = {
-		.platform_data = &bfin_can_peripherals, /* Passed to driver */
-	},
-};
-#endif	/* CONFIG_CAN_BFIN */
-
-/*
- *  USB-LAN EzExtender board
- *  Driver needs to know address, irq and flag pin.
- */
-#if IS_ENABLED(CONFIG_SMC91X)
-#include <linux/smc91x.h>
-
-static struct smc91x_platdata smc91x_info = {
-	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda = RPC_LED_100_10,
-	.ledb = RPC_LED_TX_RX,
-};
-
-static struct resource smc91x_resources[] = {
-	{
-		.name = "smc91x-regs",
-		.start = 0x20310300,
-		.end = 0x20310300 + 16,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_PF0,
-		.end = IRQ_PF0,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-static struct platform_device smc91x_device = {
-	.name = "smc91x",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(smc91x_resources),
-	.resource = smc91x_resources,
-	.dev	= {
-		.platform_data	= &smc91x_info,
-	},
-};
-#endif	/* CONFIG_SMC91X */
-
-#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
-/* all SPI peripherals info goes here */
-#if IS_ENABLED(CONFIG_MTD_M25P80)
-/* SPI flash chip (m25p16) */
-static struct mtd_partition bfin_spi_flash_partitions[] = {
-	{
-		.name = "bootloader(spi)",
-		.size = 0x00040000,
-		.offset = 0,
-		.mask_flags = MTD_CAP_ROM
-	}, {
-		.name = "linux kernel(spi)",
-		.size = 0x1c0000,
-		.offset = 0x40000
-	}
-};
-
-static struct flash_platform_data bfin_spi_flash_data = {
-	.name = "m25p80",
-	.parts = bfin_spi_flash_partitions,
-	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
-	.type = "m25p16",
-};
-
-static struct bfin5xx_spi_chip spi_flash_chip_info = {
-	.enable_dma = 0,         /* use dma transfer with this chip*/
-};
-#endif	/* CONFIG_MTD_M25P80 */
-#endif	/* CONFIG_SPI_BFIN5XX */
-
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879)
-#include <linux/platform_data/ad7879.h>
-static const struct ad7879_platform_data bfin_ad7879_ts_info = {
-	.model			= 7879,	/* Model = AD7879 */
-	.x_plate_ohms		= 620,	/* 620 Ohm from the touch datasheet */
-	.pressure_max		= 10000,
-	.pressure_min		= 0,
-	.first_conversion_delay = 3,	/* wait 512us before do a first conversion */
-	.acquisition_time 	= 1,	/* 4us acquisition time per sample */
-	.median			= 2,	/* do 8 measurements */
-	.averaging 		= 1,	/* take the average of 4 middle samples */
-	.pen_down_acc_interval 	= 255,	/* 9.4 ms */
-	.gpio_export		= 1,	/* Export GPIO to gpiolib */
-	.gpio_base		= -1,	/* Dynamic allocation */
-};
-#endif	/* CONFIG_TOUCHSCREEN_AD7879 */
-
-#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
-#include <asm/bfin-lq035q1.h>
-
-static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
-	.mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
-	.ppi_mode = USE_RGB565_16_BIT_PPI,
-	.use_bl = 0,	/* let something else control the LCD Blacklight */
-	.gpio_bl = GPIO_PF7,
-};
-
-static struct resource bfin_lq035q1_resources[] = {
-	{
-		.start = IRQ_PPI_ERROR,
-		.end = IRQ_PPI_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_lq035q1_device = {
-	.name		= "bfin-lq035q1",
-	.id		= -1,
-	.num_resources 	= ARRAY_SIZE(bfin_lq035q1_resources),
-	.resource 	= bfin_lq035q1_resources,
-	.dev		= {
-		.platform_data = &bfin_lq035q1_data,
-	},
-};
-#endif	/* CONFIG_FB_BFIN_LQ035Q1 */
-
-static struct spi_board_info bf538_spi_board_info[] __initdata = {
-#if IS_ENABLED(CONFIG_MTD_M25P80)
-	{
-		/* the modalias must be the same as spi device driver name */
-		.modalias = "m25p80", /* Name of spi_driver for this device */
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0, /* Framework bus number */
-		.chip_select = 1, /* SPI_SSEL1*/
-		.platform_data = &bfin_spi_flash_data,
-		.controller_data = &spi_flash_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif	/* CONFIG_MTD_M25P80 */
-#if IS_ENABLED(CONFIG_TOUCHSCREEN_AD7879_SPI)
-	{
-		.modalias = "ad7879",
-		.platform_data = &bfin_ad7879_ts_info,
-		.irq = IRQ_PF3,
-		.max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-		.mode = SPI_CPHA | SPI_CPOL,
-	},
-#endif	/* CONFIG_TOUCHSCREEN_AD7879_SPI */
-#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
-	{
-		.modalias = "bfin-lq035q1-spi",
-		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 2,
-		.mode = SPI_CPHA | SPI_CPOL,
-	},
-#endif	/* CONFIG_FB_BFIN_LQ035Q1 */
-#if IS_ENABLED(CONFIG_SPI_SPIDEV)
-	{
-		.modalias = "spidev",
-		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-	},
-#endif	/* CONFIG_SPI_SPIDEV */
-};
-
-/* SPI (0) */
-static struct resource bfin_spi0_resource[] = {
-	[0] = {
-		.start = SPI0_REGBASE,
-		.end   = SPI0_REGBASE + 0xFF,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = CH_SPI0,
-		.end   = CH_SPI0,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = IRQ_SPI0,
-		.end   = IRQ_SPI0,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-/* SPI (1) */
-static struct resource bfin_spi1_resource[] = {
-	[0] = {
-		.start = SPI1_REGBASE,
-		.end   = SPI1_REGBASE + 0xFF,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = CH_SPI1,
-		.end   = CH_SPI1,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = IRQ_SPI1,
-		.end   = IRQ_SPI1,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-/* SPI (2) */
-static struct resource bfin_spi2_resource[] = {
-	[0] = {
-		.start = SPI2_REGBASE,
-		.end   = SPI2_REGBASE + 0xFF,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = CH_SPI2,
-		.end   = CH_SPI2,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = IRQ_SPI2,
-		.end   = IRQ_SPI2,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-/* SPI controller data */
-static struct bfin5xx_spi_master bf538_spi_master_info0 = {
-	.num_chipselect = 8,
-	.enable_dma = 1,  /* master has the ability to do dma transfer */
-	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
-};
-
-static struct platform_device bf538_spi_master0 = {
-	.name = "bfin-spi",
-	.id = 0, /* Bus number */
-	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
-	.resource = bfin_spi0_resource,
-	.dev = {
-		.platform_data = &bf538_spi_master_info0, /* Passed to driver */
-		},
-};
-
-static struct bfin5xx_spi_master bf538_spi_master_info1 = {
-	.num_chipselect = 2,
-	.enable_dma = 1,  /* master has the ability to do dma transfer */
-	.pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
-};
-
-static struct platform_device bf538_spi_master1 = {
-	.name = "bfin-spi",
-	.id = 1, /* Bus number */
-	.num_resources = ARRAY_SIZE(bfin_spi1_resource),
-	.resource = bfin_spi1_resource,
-	.dev = {
-		.platform_data = &bf538_spi_master_info1, /* Passed to driver */
-		},
-};
-
-static struct bfin5xx_spi_master bf538_spi_master_info2 = {
-	.num_chipselect = 2,
-	.enable_dma = 1,  /* master has the ability to do dma transfer */
-	.pin_req = {P_SPI2_SCK, P_SPI2_MISO, P_SPI2_MOSI, 0},
-};
-
-static struct platform_device bf538_spi_master2 = {
-	.name = "bfin-spi",
-	.id = 2, /* Bus number */
-	.num_resources = ARRAY_SIZE(bfin_spi2_resource),
-	.resource = bfin_spi2_resource,
-	.dev = {
-		.platform_data = &bf538_spi_master_info2, /* Passed to driver */
-		},
-};
-
-#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
-static const u16 bfin_twi0_pins[] = {P_TWI0_SCL, P_TWI0_SDA, 0};
-
-static struct resource bfin_twi0_resource[] = {
-	[0] = {
-		.start = TWI0_REGBASE,
-		.end   = TWI0_REGBASE + 0xFF,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TWI0,
-		.end   = IRQ_TWI0,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c_bfin_twi0_device = {
-	.name = "i2c-bfin-twi",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
-	.resource = bfin_twi0_resource,
-	.dev = {
-		.platform_data = &bfin_twi0_pins,
-	},
-};
-
-static const u16 bfin_twi1_pins[] = {P_TWI1_SCL, P_TWI1_SDA, 0};
-
-static struct resource bfin_twi1_resource[] = {
-	[0] = {
-		.start = TWI1_REGBASE,
-		.end   = TWI1_REGBASE + 0xFF,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TWI1,
-		.end   = IRQ_TWI1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c_bfin_twi1_device = {
-	.name = "i2c-bfin-twi",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_twi1_resource),
-	.resource = bfin_twi1_resource,
-};
-#endif	/* CONFIG_I2C_BLACKFIN_TWI */
-
-#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
-#include <linux/gpio_keys.h>
-
-static struct gpio_keys_button bfin_gpio_keys_table[] = {
-	{BTN_0, GPIO_PC7, 1, "gpio-keys: BTN0"},
-};
-
-static struct gpio_keys_platform_data bfin_gpio_keys_data = {
-	.buttons        = bfin_gpio_keys_table,
-	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
-};
-
-static struct platform_device bfin_device_gpiokeys = {
-	.name      = "gpio-keys",
-	.dev = {
-		.platform_data = &bfin_gpio_keys_data,
-	},
-};
-#endif
-
-static const unsigned int cclk_vlev_datasheet[] =
-{
-/*
- * Internal VLEV BF538SBBC1533
- ****temporarily using these values until data sheet is updated
- */
-	VRPAIR(VLEV_100, 150000000),
-	VRPAIR(VLEV_100, 250000000),
-	VRPAIR(VLEV_110, 276000000),
-	VRPAIR(VLEV_115, 301000000),
-	VRPAIR(VLEV_120, 525000000),
-	VRPAIR(VLEV_125, 550000000),
-	VRPAIR(VLEV_130, 600000000),
-};
-
-static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
-	.tuple_tab = cclk_vlev_datasheet,
-	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
-	.vr_settling_time = 25 /* us */,
-};
-
-static struct platform_device bfin_dpmc = {
-	.name = "bfin dpmc",
-	.dev = {
-		.platform_data = &bfin_dmpc_vreg_data,
-	},
-};
-
-#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
-static struct mtd_partition ezkit_partitions[] = {
-	{
-		.name       = "bootloader(nor)",
-		.size       = 0x40000,
-		.offset     = 0,
-	}, {
-		.name       = "linux kernel(nor)",
-		.size       = 0x180000,
-		.offset     = MTDPART_OFS_APPEND,
-	}, {
-		.name       = "file system(nor)",
-		.size       = MTDPART_SIZ_FULL,
-		.offset     = MTDPART_OFS_APPEND,
-	}
-};
-
-static struct physmap_flash_data ezkit_flash_data = {
-	.width      = 2,
-	.parts      = ezkit_partitions,
-	.nr_parts   = ARRAY_SIZE(ezkit_partitions),
-};
-
-static struct resource ezkit_flash_resource = {
-	.start = 0x20000000,
-#if IS_ENABLED(CONFIG_SMC91X)
-	.end   = 0x202fffff,
-#else
-	.end   = 0x203fffff,
-#endif
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ezkit_flash_device = {
-	.name          = "physmap-flash",
-	.id            = 0,
-	.dev = {
-		.platform_data = &ezkit_flash_data,
-	},
-	.num_resources = 1,
-	.resource      = &ezkit_flash_resource,
-};
-#endif
-
-static struct platform_device *cm_bf538_devices[] __initdata = {
-
-	&bfin_dpmc,
-
-#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
-	&rtc_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-	&bfin_uart0_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-	&bfin_uart1_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART2
-	&bfin_uart2_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
-	&bf538_spi_master0,
-	&bf538_spi_master1,
-	&bf538_spi_master2,
-#endif
-
-#if IS_ENABLED(CONFIG_I2C_BLACKFIN_TWI)
-	&i2c_bfin_twi0_device,
-	&i2c_bfin_twi1_device,
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_SIR)
-#ifdef CONFIG_BFIN_SIR0
-	&bfin_sir0_device,
-#endif
-#ifdef CONFIG_BFIN_SIR1
-	&bfin_sir1_device,
-#endif
-#ifdef CONFIG_BFIN_SIR2
-	&bfin_sir2_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-	&bfin_sport0_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-	&bfin_sport1_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
-	&bfin_sport2_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
-	&bfin_sport3_uart_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_CAN_BFIN)
-	&bfin_can_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SMC91X)
-	&smc91x_device,
-#endif
-
-#if IS_ENABLED(CONFIG_FB_BFIN_LQ035Q1)
-	&bfin_lq035q1_device,
-#endif
-
-#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
-	&bfin_device_gpiokeys,
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_PHYSMAP)
-	&ezkit_flash_device,
-#endif
-};
-
-static int __init ezkit_init(void)
-{
-	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-	platform_add_devices(cm_bf538_devices, ARRAY_SIZE(cm_bf538_devices));
-
-#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
-	spi_register_board_info(bf538_spi_board_info,
-			ARRAY_SIZE(bf538_spi_board_info));
-#endif
-
-	return 0;
-}
-
-arch_initcall(ezkit_init);
-
-static struct platform_device *ezkit_early_devices[] __initdata = {
-#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-	&bfin_uart0_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART1
-	&bfin_uart1_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_UART2
-	&bfin_uart2_device,
-#endif
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-	&bfin_sport0_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-	&bfin_sport1_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT2_UART
-	&bfin_sport2_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT3_UART
-	&bfin_sport3_uart_device,
-#endif
-#endif
-};
-
-void __init native_machine_early_platform_add_devices(void)
-{
-	printk(KERN_INFO "register early platform devices\n");
-	early_platform_add_devices(ezkit_early_devices,
-		ARRAY_SIZE(ezkit_early_devices));
-}