summaryrefslogtreecommitdiff
path: root/arch/blackfin
diff options
context:
space:
mode:
authorMike Frysinger <vapier.adi@gmail.com>2008-04-25 02:11:24 +0800
committerBryan Wu <cooloney@kernel.org>2008-04-25 02:11:24 +0800
commit5f004c2009ef95212349f7c7d87e8ff829d15c31 (patch)
tree5cd44ee2cc443400eed99f71d53e376d41243a4e /arch/blackfin
parentaffee2b2613ada262eecea354b6c60696ca5d482 (diff)
[Blackfin] arch: reorganize some of the board-customization options so that similar things are together and only available as needed
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
Diffstat (limited to 'arch/blackfin')
-rw-r--r--arch/blackfin/Kconfig63
1 files changed, 30 insertions, 33 deletions
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 75bceee9b9a5..eba22c219820 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -272,6 +272,20 @@ config CMDLINE
to the kernel, you may specify one here. As a minimum, you should specify
the memory size and the root device (e.g., mem=8M, root=/dev/nfs).
+config BOOT_LOAD
+ hex "Kernel load address for booting"
+ default "0x1000"
+ range 0x1000 0x20000000
+ help
+ This option allows you to set the load address of the kernel.
+ This can be useful if you are on a board which has a small amount
+ of memory or you wish to reserve some memory at the beginning of
+ the address space.
+
+ Note that you need to keep this value above 4k (0x1000) as this
+ memory region is used to capture NULL pointer references as well
+ as some core kernel functions.
+
comment "Clock/PLL Setup"
config CLKIN_HZ
@@ -303,6 +317,7 @@ config MEM_ADD_WIDTH
int "Memory Address Width"
depends on BFIN_KERNEL_CLOCK
depends on (!BF54x)
+ range 8 11
default 9 if BFIN533_EZKIT
default 9 if BFIN561_EZKIT
default 9 if H8606_HVSISTEMAS
@@ -365,14 +380,7 @@ config SCLK_DIV
int "System Clock Divider"
depends on BFIN_KERNEL_CLOCK
range 1 15
- default 5 if BFIN533_EZKIT
- default 5 if BFIN533_STAMP
- default 4 if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM)
- default 5 if BFIN533_BLUETECHNIX_CM
- default 4 if BFIN537_BLUETECHNIX_CM
- default 4 if BFIN561_BLUETECHNIX_CM
- default 5 if BFIN561_EZKIT
- default 3 if H8606_HVSISTEMAS
+ default 5
help
This sets the frequency of the system clock (including SDRAM or DDR).
This can be between 1 and 15
@@ -386,6 +394,19 @@ config MAX_MEM_SIZE
This is the max memory size that the kernel will create CPLB
tables for. Your system will not be able to handle any more.
+choice
+ prompt "DDR SDRAM Chip Type"
+ depends on BFIN_KERNEL_CLOCK
+ depends on BF54x
+ default MEM_MT46V32M16_5B
+
+config MEM_MT46V32M16_6T
+ bool "MT46V32M16_6T"
+
+config MEM_MT46V32M16_5B
+ bool "MT46V32M16_5B"
+endchoice
+
#
# Max & Min Speeds for various Chips
#
@@ -454,17 +475,7 @@ source kernel/time/Kconfig
comment "Memory Setup"
-choice
- prompt "DDR SDRAM Chip Type"
- depends on (BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM)
- default MEM_MT46V32M16_5B
-
-config MEM_MT46V32M16_6T
- bool "MT46V32M16_6T"
-
-config MEM_MT46V32M16_5B
- bool "MT46V32M16_5B"
-endchoice
+comment "Misc"
config ENET_FLASH_PIN
int "PF port/pin used for flash and ethernet sharing"
@@ -476,20 +487,6 @@ config ENET_FLASH_PIN
code.
For example: PF0 --> 0,PF1 --> 1,PF2 --> 2, etc.
-config BOOT_LOAD
- hex "Kernel load address for booting"
- default "0x1000"
- range 0x1000 0x20000000
- help
- This option allows you to set the load address of the kernel.
- This can be useful if you are on a board which has a small amount
- of memory or you wish to reserve some memory at the beginning of
- the address space.
-
- Note that you need to keep this value above 4k (0x1000) as this
- memory region is used to capture NULL pointer references as well
- as some core kernel functions.
-
choice
prompt "Blackfin Exception Scratch Register"
default BFIN_SCRATCH_REG_RETN