Merge branch 'master'

36 files changed, 825 insertions, 591 deletions

diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index d2703cda61ea..bac0da731ee3 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -5,7 +5,7 @@
 
 mainmenu "Linux Kernel Configuration"
 
-config X86
+config X86_32
 	bool
 	default y
 	help
@@ -18,6 +18,10 @@ config SEMAPHORE_SLEEPERS
 	bool
 	default y
 
+config X86
+	bool
+	default y
+
 config MMU
 	bool
 	default y
@@ -151,304 +155,7 @@ config ES7000_CLUSTERED_APIC
 	default y
 	depends on SMP && X86_ES7000 && MPENTIUMIII
 
-if !X86_ELAN
-
-choice
-	prompt "Processor family"
-	default M686
-
-config M386
-	bool "386"
-	---help---
-	  This is the processor type of your CPU. This information is used for
-	  optimizing purposes. In order to compile a kernel that can run on
-	  all x86 CPU types (albeit not optimally fast), you can specify
-	  "386" here.
-
-	  The kernel will not necessarily run on earlier architectures than
-	  the one you have chosen, e.g. a Pentium optimized kernel will run on
-	  a PPro, but not necessarily on a i486.
-
-	  Here are the settings recommended for greatest speed:
-	  - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI
-	  486DLC/DLC2, UMC 486SX-S and NexGen Nx586.  Only "386" kernels
-	  will run on a 386 class machine.
-	  - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or
-	  SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S.
-	  - "586" for generic Pentium CPUs lacking the TSC
-	  (time stamp counter) register.
-	  - "Pentium-Classic" for the Intel Pentium.
-	  - "Pentium-MMX" for the Intel Pentium MMX.
-	  - "Pentium-Pro" for the Intel Pentium Pro.
-	  - "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron.
-	  - "Pentium-III" for the Intel Pentium III or Coppermine Celeron.
-	  - "Pentium-4" for the Intel Pentium 4 or P4-based Celeron.
-	  - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D).
-	  - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird).
-	  - "Crusoe" for the Transmeta Crusoe series.
-	  - "Efficeon" for the Transmeta Efficeon series.
-	  - "Winchip-C6" for original IDT Winchip.
-	  - "Winchip-2" for IDT Winchip 2.
-	  - "Winchip-2A" for IDT Winchips with 3dNow! capabilities.
-	  - "GeodeGX1" for Geode GX1 (Cyrix MediaGX).
-	  - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3.
-	  - "VIA C3-2 for VIA C3-2 "Nehemiah" (model 9 and above).
-
-	  If you don't know what to do, choose "386".
-
-config M486
-	bool "486"
-	help
-	  Select this for a 486 series processor, either Intel or one of the
-	  compatible processors from AMD, Cyrix, IBM, or Intel.  Includes DX,
-	  DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or
-	  U5S.
-
-config M586
-	bool "586/K5/5x86/6x86/6x86MX"
-	help
-	  Select this for an 586 or 686 series processor such as the AMD K5,
-	  the Cyrix 5x86, 6x86 and 6x86MX.  This choice does not
-	  assume the RDTSC (Read Time Stamp Counter) instruction.
-
-config M586TSC
-	bool "Pentium-Classic"
-	help
-	  Select this for a Pentium Classic processor with the RDTSC (Read
-	  Time Stamp Counter) instruction for benchmarking.
-
-config M586MMX
-	bool "Pentium-MMX"
-	help
-	  Select this for a Pentium with the MMX graphics/multimedia
-	  extended instructions.
-
-config M686
-	bool "Pentium-Pro"
-	help
-	  Select this for Intel Pentium Pro chips.  This enables the use of
-	  Pentium Pro extended instructions, and disables the init-time guard
-	  against the f00f bug found in earlier Pentiums.
-
-config MPENTIUMII
-	bool "Pentium-II/Celeron(pre-Coppermine)"
-	help
-	  Select this for Intel chips based on the Pentium-II and
-	  pre-Coppermine Celeron core.  This option enables an unaligned
-	  copy optimization, compiles the kernel with optimization flags
-	  tailored for the chip, and applies any applicable Pentium Pro
-	  optimizations.
-
-config MPENTIUMIII
-	bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
-	help
-	  Select this for Intel chips based on the Pentium-III and
-	  Celeron-Coppermine core.  This option enables use of some
-	  extended prefetch instructions in addition to the Pentium II
-	  extensions.
-
-config MPENTIUMM
-	bool "Pentium M"
-	help
-	  Select this for Intel Pentium M (not Pentium-4 M)
-	  notebook chips.
-
-config MPENTIUM4
-	bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/Xeon"
-	help
-	  Select this for Intel Pentium 4 chips.  This includes the
-	  Pentium 4, P4-based Celeron and Xeon, and Pentium-4 M
-	  (not Pentium M) chips.  This option enables compile flags
-	  optimized for the chip, uses the correct cache shift, and
-	  applies any applicable Pentium III optimizations.
-
-config MK6
-	bool "K6/K6-II/K6-III"
-	help
-	  Select this for an AMD K6-family processor.  Enables use of
-	  some extended instructions, and passes appropriate optimization
-	  flags to GCC.
-
-config MK7
-	bool "Athlon/Duron/K7"
-	help
-	  Select this for an AMD Athlon K7-family processor.  Enables use of
-	  some extended instructions, and passes appropriate optimization
-	  flags to GCC.
-
-config MK8
-	bool "Opteron/Athlon64/Hammer/K8"
-	help
-	  Select this for an AMD Opteron or Athlon64 Hammer-family processor.  Enables
-	  use of some extended instructions, and passes appropriate optimization
-	  flags to GCC.
-
-config MCRUSOE
-	bool "Crusoe"
-	help
-	  Select this for a Transmeta Crusoe processor.  Treats the processor
-	  like a 586 with TSC, and sets some GCC optimization flags (like a
-	  Pentium Pro with no alignment requirements).
-
-config MEFFICEON
-	bool "Efficeon"
-	help
-	  Select this for a Transmeta Efficeon processor.
-
-config MWINCHIPC6
-	bool "Winchip-C6"
-	help
-	  Select this for an IDT Winchip C6 chip.  Linux and GCC
-	  treat this chip as a 586TSC with some extended instructions
-	  and alignment requirements.
-
-config MWINCHIP2
-	bool "Winchip-2"
-	help
-	  Select this for an IDT Winchip-2.  Linux and GCC
-	  treat this chip as a 586TSC with some extended instructions
-	  and alignment requirements.
-
-config MWINCHIP3D
-	bool "Winchip-2A/Winchip-3"
-	help
-	  Select this for an IDT Winchip-2A or 3.  Linux and GCC
-	  treat this chip as a 586TSC with some extended instructions
-	  and alignment reqirements.  Also enable out of order memory
-	  stores for this CPU, which can increase performance of some
-	  operations.
-
-config MGEODEGX1
-	bool "GeodeGX1"
-	help
-	  Select this for a Geode GX1 (Cyrix MediaGX) chip.
-
-config MCYRIXIII
-	bool "CyrixIII/VIA-C3"
-	help
-	  Select this for a Cyrix III or C3 chip.  Presently Linux and GCC
-	  treat this chip as a generic 586. Whilst the CPU is 686 class,
-	  it lacks the cmov extension which gcc assumes is present when
-	  generating 686 code.
-	  Note that Nehemiah (Model 9) and above will not boot with this
-	  kernel due to them lacking the 3DNow! instructions used in earlier
-	  incarnations of the CPU.
-
-config MVIAC3_2
-	bool "VIA C3-2 (Nehemiah)"
-	help
-	  Select this for a VIA C3 "Nehemiah". Selecting this enables usage
-	  of SSE and tells gcc to treat the CPU as a 686.
-	  Note, this kernel will not boot on older (pre model 9) C3s.
-
-endchoice
-
-config X86_GENERIC
-       bool "Generic x86 support"
-       help
-	  Instead of just including optimizations for the selected
-	  x86 variant (e.g. PII, Crusoe or Athlon), include some more
-	  generic optimizations as well. This will make the kernel
-	  perform better on x86 CPUs other than that selected.
-
-	  This is really intended for distributors who need more
-	  generic optimizations.
-
-endif
-
-#
-# Define implied options from the CPU selection here
-#
-config X86_CMPXCHG
-	bool
-	depends on !M386
-	default y
-
-config X86_XADD
-	bool
-	depends on !M386
-	default y
-
-config X86_L1_CACHE_SHIFT
-	int
-	default "7" if MPENTIUM4 || X86_GENERIC
-	default "4" if X86_ELAN || M486 || M386
-	default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODEGX1
-	default "6" if MK7 || MK8 || MPENTIUMM
-
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	depends on M386
-	default y
-
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-	depends on !M386
-	default y
-
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
-config X86_PPRO_FENCE
-	bool
-	depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1
-	default y
-
-config X86_F00F_BUG
-	bool
-	depends on M586MMX || M586TSC || M586 || M486 || M386
-	default y
-
-config X86_WP_WORKS_OK
-	bool
-	depends on !M386
-	default y
-
-config X86_INVLPG
-	bool
-	depends on !M386
-	default y
-
-config X86_BSWAP
-	bool
-	depends on !M386
-	default y
-
-config X86_POPAD_OK
-	bool
-	depends on !M386
-	default y
-
-config X86_ALIGNMENT_16
-	bool
-	depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
-	default y
-
-config X86_GOOD_APIC
-	bool
-	depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON
-	default y
-
-config X86_INTEL_USERCOPY
-	bool
-	depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON
-	default y
-
-config X86_USE_PPRO_CHECKSUM
-	bool
-	depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON
-	default y
-
-config X86_USE_3DNOW
-	bool
-	depends on MCYRIXIII || MK7
-	default y
-
-config X86_OOSTORE
-	bool
-	depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR
-	default y
+source "arch/i386/Kconfig.cpu"
 
 config HPET_TIMER
 	bool "HPET Timer Support"
@@ -561,11 +268,6 @@ config X86_VISWS_APIC
 	depends on X86_VISWS
 	default y
 
-config X86_TSC
-	bool
-	depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MGEODEGX1) && !X86_NUMAQ
-	default y
-
 config X86_MCE
 	bool "Machine Check Exception"
 	depends on !X86_VOYAGER
@@ -1340,8 +1042,3 @@ config X86_TRAMPOLINE
 	bool
 	depends on X86_SMP || (X86_VOYAGER && SMP)
 	default y
-
-config PC
-	bool
-	depends on X86 && !EMBEDDED
-	default y
diff --git a/arch/i386/Kconfig.cpu b/arch/i386/Kconfig.cpu
new file mode 100644
index 000000000000..53bbb3c008ee
--- /dev/null
+++ b/arch/i386/Kconfig.cpu
@@ -0,0 +1,309 @@
+# Put here option for CPU selection and depending optimization
+if !X86_ELAN
+
+choice
+	prompt "Processor family"
+	default M686
+
+config M386
+	bool "386"
+	---help---
+	  This is the processor type of your CPU. This information is used for
+	  optimizing purposes. In order to compile a kernel that can run on
+	  all x86 CPU types (albeit not optimally fast), you can specify
+	  "386" here.
+
+	  The kernel will not necessarily run on earlier architectures than
+	  the one you have chosen, e.g. a Pentium optimized kernel will run on
+	  a PPro, but not necessarily on a i486.
+
+	  Here are the settings recommended for greatest speed:
+	  - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI
+	  486DLC/DLC2, UMC 486SX-S and NexGen Nx586.  Only "386" kernels
+	  will run on a 386 class machine.
+	  - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or
+	  SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S.
+	  - "586" for generic Pentium CPUs lacking the TSC
+	  (time stamp counter) register.
+	  - "Pentium-Classic" for the Intel Pentium.
+	  - "Pentium-MMX" for the Intel Pentium MMX.
+	  - "Pentium-Pro" for the Intel Pentium Pro.
+	  - "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron.
+	  - "Pentium-III" for the Intel Pentium III or Coppermine Celeron.
+	  - "Pentium-4" for the Intel Pentium 4 or P4-based Celeron.
+	  - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D).
+	  - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird).
+	  - "Crusoe" for the Transmeta Crusoe series.
+	  - "Efficeon" for the Transmeta Efficeon series.
+	  - "Winchip-C6" for original IDT Winchip.
+	  - "Winchip-2" for IDT Winchip 2.
+	  - "Winchip-2A" for IDT Winchips with 3dNow! capabilities.
+	  - "GeodeGX1" for Geode GX1 (Cyrix MediaGX).
+	  - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3.
+	  - "VIA C3-2 for VIA C3-2 "Nehemiah" (model 9 and above).
+
+	  If you don't know what to do, choose "386".
+
+config M486
+	bool "486"
+	help
+	  Select this for a 486 series processor, either Intel or one of the
+	  compatible processors from AMD, Cyrix, IBM, or Intel.  Includes DX,
+	  DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or
+	  U5S.
+
+config M586
+	bool "586/K5/5x86/6x86/6x86MX"
+	help
+	  Select this for an 586 or 686 series processor such as the AMD K5,
+	  the Cyrix 5x86, 6x86 and 6x86MX.  This choice does not
+	  assume the RDTSC (Read Time Stamp Counter) instruction.
+
+config M586TSC
+	bool "Pentium-Classic"
+	help
+	  Select this for a Pentium Classic processor with the RDTSC (Read
+	  Time Stamp Counter) instruction for benchmarking.
+
+config M586MMX
+	bool "Pentium-MMX"
+	help
+	  Select this for a Pentium with the MMX graphics/multimedia
+	  extended instructions.
+
+config M686
+	bool "Pentium-Pro"
+	help
+	  Select this for Intel Pentium Pro chips.  This enables the use of
+	  Pentium Pro extended instructions, and disables the init-time guard
+	  against the f00f bug found in earlier Pentiums.
+
+config MPENTIUMII
+	bool "Pentium-II/Celeron(pre-Coppermine)"
+	help
+	  Select this for Intel chips based on the Pentium-II and
+	  pre-Coppermine Celeron core.  This option enables an unaligned
+	  copy optimization, compiles the kernel with optimization flags
+	  tailored for the chip, and applies any applicable Pentium Pro
+	  optimizations.
+
+config MPENTIUMIII
+	bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
+	help
+	  Select this for Intel chips based on the Pentium-III and
+	  Celeron-Coppermine core.  This option enables use of some
+	  extended prefetch instructions in addition to the Pentium II
+	  extensions.
+
+config MPENTIUMM
+	bool "Pentium M"
+	help
+	  Select this for Intel Pentium M (not Pentium-4 M)
+	  notebook chips.
+
+config MPENTIUM4
+	bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/Xeon"
+	help
+	  Select this for Intel Pentium 4 chips.  This includes the
+	  Pentium 4, P4-based Celeron and Xeon, and Pentium-4 M
+	  (not Pentium M) chips.  This option enables compile flags
+	  optimized for the chip, uses the correct cache shift, and
+	  applies any applicable Pentium III optimizations.
+
+config MK6
+	bool "K6/K6-II/K6-III"
+	help
+	  Select this for an AMD K6-family processor.  Enables use of
+	  some extended instructions, and passes appropriate optimization
+	  flags to GCC.
+
+config MK7
+	bool "Athlon/Duron/K7"
+	help
+	  Select this for an AMD Athlon K7-family processor.  Enables use of
+	  some extended instructions, and passes appropriate optimization
+	  flags to GCC.
+
+config MK8
+	bool "Opteron/Athlon64/Hammer/K8"
+	help
+	  Select this for an AMD Opteron or Athlon64 Hammer-family processor.  Enables
+	  use of some extended instructions, and passes appropriate optimization
+	  flags to GCC.
+
+config MCRUSOE
+	bool "Crusoe"
+	help
+	  Select this for a Transmeta Crusoe processor.  Treats the processor
+	  like a 586 with TSC, and sets some GCC optimization flags (like a
+	  Pentium Pro with no alignment requirements).
+
+config MEFFICEON
+	bool "Efficeon"
+	help
+	  Select this for a Transmeta Efficeon processor.
+
+config MWINCHIPC6
+	bool "Winchip-C6"
+	help
+	  Select this for an IDT Winchip C6 chip.  Linux and GCC
+	  treat this chip as a 586TSC with some extended instructions
+	  and alignment requirements.
+
+config MWINCHIP2
+	bool "Winchip-2"
+	help
+	  Select this for an IDT Winchip-2.  Linux and GCC
+	  treat this chip as a 586TSC with some extended instructions
+	  and alignment requirements.
+
+config MWINCHIP3D
+	bool "Winchip-2A/Winchip-3"
+	help
+	  Select this for an IDT Winchip-2A or 3.  Linux and GCC
+	  treat this chip as a 586TSC with some extended instructions
+	  and alignment reqirements.  Also enable out of order memory
+	  stores for this CPU, which can increase performance of some
+	  operations.
+
+config MGEODEGX1
+	bool "GeodeGX1"
+	help
+	  Select this for a Geode GX1 (Cyrix MediaGX) chip.
+
+config MCYRIXIII
+	bool "CyrixIII/VIA-C3"
+	help
+	  Select this for a Cyrix III or C3 chip.  Presently Linux and GCC
+	  treat this chip as a generic 586. Whilst the CPU is 686 class,
+	  it lacks the cmov extension which gcc assumes is present when
+	  generating 686 code.
+	  Note that Nehemiah (Model 9) and above will not boot with this
+	  kernel due to them lacking the 3DNow! instructions used in earlier
+	  incarnations of the CPU.
+
+config MVIAC3_2
+	bool "VIA C3-2 (Nehemiah)"
+	help
+	  Select this for a VIA C3 "Nehemiah". Selecting this enables usage
+	  of SSE and tells gcc to treat the CPU as a 686.
+	  Note, this kernel will not boot on older (pre model 9) C3s.
+
+endchoice
+
+config X86_GENERIC
+       bool "Generic x86 support"
+       help
+	  Instead of just including optimizations for the selected
+	  x86 variant (e.g. PII, Crusoe or Athlon), include some more
+	  generic optimizations as well. This will make the kernel
+	  perform better on x86 CPUs other than that selected.
+
+	  This is really intended for distributors who need more
+	  generic optimizations.
+
+endif
+
+#
+# Define implied options from the CPU selection here
+#
+config X86_CMPXCHG
+	bool
+	depends on !M386
+	default y
+
+config X86_XADD
+	bool
+	depends on !M386
+	default y
+
+config X86_L1_CACHE_SHIFT
+	int
+	default "7" if MPENTIUM4 || X86_GENERIC
+	default "4" if X86_ELAN || M486 || M386
+	default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODEGX1
+	default "6" if MK7 || MK8 || MPENTIUMM
+
+config RWSEM_GENERIC_SPINLOCK
+	bool
+	depends on M386
+	default y
+
+config RWSEM_XCHGADD_ALGORITHM
+	bool
+	depends on !M386
+	default y
+
+config GENERIC_CALIBRATE_DELAY
+	bool
+	default y
+
+config X86_PPRO_FENCE
+	bool
+	depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1
+	default y
+
+config X86_F00F_BUG
+	bool
+	depends on M586MMX || M586TSC || M586 || M486 || M386
+	default y
+
+config X86_WP_WORKS_OK
+	bool
+	depends on !M386
+	default y
+
+config X86_INVLPG
+	bool
+	depends on !M386
+	default y
+
+config X86_BSWAP
+	bool
+	depends on !M386
+	default y
+
+config X86_POPAD_OK
+	bool
+	depends on !M386
+	default y
+
+config X86_CMPXCHG64
+	bool
+	depends on !M386 && !M486
+	default y
+
+config X86_ALIGNMENT_16
+	bool
+	depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
+	default y
+
+config X86_GOOD_APIC
+	bool
+	depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON
+	default y
+
+config X86_INTEL_USERCOPY
+	bool
+	depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON
+	default y
+
+config X86_USE_PPRO_CHECKSUM
+	bool
+	depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON
+	default y
+
+config X86_USE_3DNOW
+	bool
+	depends on MCYRIXIII || MK7
+	default y
+
+config X86_OOSTORE
+	bool
+	depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR
+	default y
+
+config X86_TSC
+	bool
+	depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MGEODEGX1) && !X86_NUMAQ
+	default y
diff --git a/arch/i386/Makefile b/arch/i386/Makefile
index 09951990a622..d121ea18460f 100644
--- a/arch/i386/Makefile
+++ b/arch/i386/Makefile
@@ -34,35 +34,8 @@ CFLAGS += -pipe -msoft-float
 # prevent gcc from keeping the stack 16 byte aligned
 CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2)
 
-align := $(cc-option-align)
-cflags-$(CONFIG_M386)		+= -march=i386
-cflags-$(CONFIG_M486)		+= -march=i486
-cflags-$(CONFIG_M586)		+= -march=i586
-cflags-$(CONFIG_M586TSC)	+= -march=i586
-cflags-$(CONFIG_M586MMX)	+= $(call cc-option,-march=pentium-mmx,-march=i586)
-cflags-$(CONFIG_M686)		+= -march=i686
-cflags-$(CONFIG_MPENTIUMII)	+= -march=i686 $(call cc-option,-mtune=pentium2)
-cflags-$(CONFIG_MPENTIUMIII)	+= -march=i686 $(call cc-option,-mtune=pentium3)
-cflags-$(CONFIG_MPENTIUMM)	+= -march=i686 $(call cc-option,-mtune=pentium3)
-cflags-$(CONFIG_MPENTIUM4)	+= -march=i686 $(call cc-option,-mtune=pentium4)
-cflags-$(CONFIG_MK6)		+= -march=k6
-# Please note, that patches that add -march=athlon-xp and friends are pointless.
-# They make zero difference whatsosever to performance at this time.
-cflags-$(CONFIG_MK7)		+= $(call cc-option,-march=athlon,-march=i686 $(align)-functions=4)
-cflags-$(CONFIG_MK8)		+= $(call cc-option,-march=k8,$(call cc-option,-march=athlon,-march=i686 $(align)-functions=4))
-cflags-$(CONFIG_MCRUSOE)	+= -march=i686 $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
-cflags-$(CONFIG_MEFFICEON)	+= -march=i686 $(call cc-option,-mtune=pentium3) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
-cflags-$(CONFIG_MWINCHIPC6)	+= $(call cc-option,-march=winchip-c6,-march=i586)
-cflags-$(CONFIG_MWINCHIP2)	+= $(call cc-option,-march=winchip2,-march=i586)
-cflags-$(CONFIG_MWINCHIP3D)	+= $(call cc-option,-march=winchip2,-march=i586)
-cflags-$(CONFIG_MCYRIXIII)	+= $(call cc-option,-march=c3,-march=i486) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
-cflags-$(CONFIG_MVIAC3_2)	+= $(call cc-option,-march=c3-2,-march=i686)
-
-# AMD Elan support
-cflags-$(CONFIG_X86_ELAN)	+= -march=i486
-
-# Geode GX1 support
-cflags-$(CONFIG_MGEODEGX1)		+= $(call cc-option,-march=pentium-mmx,-march=i486)
+# CPU-specific tuning. Anything which can be shared with UML should go here.
+include $(srctree)/arch/i386/Makefile.cpu
 
 # -mregparm=3 works ok on gcc-3.0 and later
 #
diff --git a/arch/i386/Makefile.cpu b/arch/i386/Makefile.cpu
new file mode 100644
index 000000000000..8e51456df23d
--- /dev/null
+++ b/arch/i386/Makefile.cpu
@@ -0,0 +1,41 @@
+# CPU tuning section - shared with UML.
+# Must change only cflags-y (or [yn]), not CFLAGS! That makes a difference for UML.
+
+#-mtune exists since gcc 3.4, and some -mcpu flavors didn't exist in gcc 2.95.
+HAS_MTUNE	:= $(call cc-option-yn, -mtune=i386)
+ifeq ($(HAS_MTUNE),y)
+tune		= $(call cc-option,-mtune=$(1),)
+else
+tune		= $(call cc-option,-mcpu=$(1),)
+endif
+
+align := $(cc-option-align)
+cflags-$(CONFIG_M386)		+= -march=i386
+cflags-$(CONFIG_M486)		+= -march=i486
+cflags-$(CONFIG_M586)		+= -march=i586
+cflags-$(CONFIG_M586TSC)	+= -march=i586
+cflags-$(CONFIG_M586MMX)	+= $(call cc-option,-march=pentium-mmx,-march=i586)
+cflags-$(CONFIG_M686)		+= -march=i686
+cflags-$(CONFIG_MPENTIUMII)	+= -march=i686 $(call tune,pentium2)
+cflags-$(CONFIG_MPENTIUMIII)	+= -march=i686 $(call tune,pentium3)
+cflags-$(CONFIG_MPENTIUMM)	+= -march=i686 $(call tune,pentium3)
+cflags-$(CONFIG_MPENTIUM4)	+= -march=i686 $(call tune,pentium4)
+cflags-$(CONFIG_MK6)		+= -march=k6
+# Please note, that patches that add -march=athlon-xp and friends are pointless.
+# They make zero difference whatsosever to performance at this time.
+cflags-$(CONFIG_MK7)		+= $(call cc-option,-march=athlon,-march=i686 $(align)-functions=4)
+cflags-$(CONFIG_MK8)		+= $(call cc-option,-march=k8,$(call cc-option,-march=athlon,-march=i686 $(align)-functions=4))
+cflags-$(CONFIG_MCRUSOE)	+= -march=i686 $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
+cflags-$(CONFIG_MEFFICEON)	+= -march=i686 $(call tune,pentium3) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
+cflags-$(CONFIG_MWINCHIPC6)	+= $(call cc-option,-march=winchip-c6,-march=i586)
+cflags-$(CONFIG_MWINCHIP2)	+= $(call cc-option,-march=winchip2,-march=i586)
+cflags-$(CONFIG_MWINCHIP3D)	+= $(call cc-option,-march=winchip2,-march=i586)
+cflags-$(CONFIG_MCYRIXIII)	+= $(call cc-option,-march=c3,-march=i486) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
+cflags-$(CONFIG_MVIAC3_2)	+= $(call cc-option,-march=c3-2,-march=i686)
+
+# AMD Elan support
+cflags-$(CONFIG_X86_ELAN)	+= -march=i486
+
+# Geode GX1 support
+cflags-$(CONFIG_MGEODEGX1)		+= $(call cc-option,-march=pentium-mmx,-march=i486)
+
diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c
index 5546ddebec33..7c724ffa08bb 100644
--- a/arch/i386/kernel/apic.c
+++ b/arch/i386/kernel/apic.c
@@ -1046,10 +1046,11 @@ static unsigned int calibration_result;
 
 void __init setup_boot_APIC_clock(void)
 {
+	unsigned long flags;
 	apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n");
 	using_apic_timer = 1;
 
-	local_irq_disable();
+	local_irq_save(flags);
 
 	calibration_result = calibrate_APIC_clock();
 	/*
@@ -1057,7 +1058,7 @@ void __init setup_boot_APIC_clock(void)
 	 */
 	setup_APIC_timer(calibration_result);
 
-	local_irq_enable();
+	local_irq_restore(flags);
 }
 
 void __devinit setup_secondary_APIC_clock(void)
diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c
index d7811c4e8b50..d2ef0c2aa93e 100644
--- a/arch/i386/kernel/apm.c
+++ b/arch/i386/kernel/apm.c
@@ -597,12 +597,14 @@ static u8 apm_bios_call(u32 func, u32 ebx_in, u32 ecx_in,
 	cpumask_t		cpus;
 	int			cpu;
 	struct desc_struct	save_desc_40;
+	struct desc_struct	*gdt;
 
 	cpus = apm_save_cpus();
 	
 	cpu = get_cpu();
-	save_desc_40 = per_cpu(cpu_gdt_table, cpu)[0x40 / 8];
-	per_cpu(cpu_gdt_table, cpu)[0x40 / 8] = bad_bios_desc;
+	gdt = get_cpu_gdt_table(cpu);
+	save_desc_40 = gdt[0x40 / 8];
+	gdt[0x40 / 8] = bad_bios_desc;
 
 	local_save_flags(flags);
 	APM_DO_CLI;
@@ -610,7 +612,7 @@ static u8 apm_bios_call(u32 func, u32 ebx_in, u32 ecx_in,
 	apm_bios_call_asm(func, ebx_in, ecx_in, eax, ebx, ecx, edx, esi);
 	APM_DO_RESTORE_SEGS;
 	local_irq_restore(flags);
-	per_cpu(cpu_gdt_table, cpu)[0x40 / 8] = save_desc_40;
+	gdt[0x40 / 8] = save_desc_40;
 	put_cpu();
 	apm_restore_cpus(cpus);
 	
@@ -639,13 +641,14 @@ static u8 apm_bios_call_simple(u32 func, u32 ebx_in, u32 ecx_in, u32 *eax)
 	cpumask_t		cpus;
 	int			cpu;
 	struct desc_struct	save_desc_40;
-
+	struct desc_struct	*gdt;
 
 	cpus = apm_save_cpus();
 	
 	cpu = get_cpu();
-	save_desc_40 = per_cpu(cpu_gdt_table, cpu)[0x40 / 8];
-	per_cpu(cpu_gdt_table, cpu)[0x40 / 8] = bad_bios_desc;
+	gdt = get_cpu_gdt_table(cpu);
+	save_desc_40 = gdt[0x40 / 8];
+	gdt[0x40 / 8] = bad_bios_desc;
 
 	local_save_flags(flags);
 	APM_DO_CLI;
@@ -653,7 +656,7 @@ static u8 apm_bios_call_simple(u32 func, u32 ebx_in, u32 ecx_in, u32 *eax)
 	error = apm_bios_call_simple_asm(func, ebx_in, ecx_in, eax);
 	APM_DO_RESTORE_SEGS;
 	local_irq_restore(flags);
-	__get_cpu_var(cpu_gdt_table)[0x40 / 8] = save_desc_40;
+	gdt[0x40 / 8] = save_desc_40;
 	put_cpu();
 	apm_restore_cpus(cpus);
 	return error;
@@ -2295,35 +2298,36 @@ static int __init apm_init(void)
 	apm_bios_entry.segment = APM_CS;
 
 	for (i = 0; i < NR_CPUS; i++) {
-		set_base(per_cpu(cpu_gdt_table, i)[APM_CS >> 3],
+		struct desc_struct *gdt = get_cpu_gdt_table(i);
+		set_base(gdt[APM_CS >> 3],
 			 __va((unsigned long)apm_info.bios.cseg << 4));
-		set_base(per_cpu(cpu_gdt_table, i)[APM_CS_16 >> 3],
+		set_base(gdt[APM_CS_16 >> 3],
 			 __va((unsigned long)apm_info.bios.cseg_16 << 4));
-		set_base(per_cpu(cpu_gdt_table, i)[APM_DS >> 3],
+		set_base(gdt[APM_DS >> 3],
 			 __va((unsigned long)apm_info.bios.dseg << 4));
 #ifndef APM_RELAX_SEGMENTS
 		if (apm_info.bios.version == 0x100) {
 #endif
 			/* For ASUS motherboard, Award BIOS rev 110 (and others?) */
-			_set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS >> 3], 64 * 1024 - 1);
+			_set_limit((char *)&gdt[APM_CS >> 3], 64 * 1024 - 1);
 			/* For some unknown machine. */
-			_set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS_16 >> 3], 64 * 1024 - 1);
+			_set_limit((char *)&gdt[APM_CS_16 >> 3], 64 * 1024 - 1);
 			/* For the DEC Hinote Ultra CT475 (and others?) */
-			_set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_DS >> 3], 64 * 1024 - 1);
+			_set_limit((char *)&gdt[APM_DS >> 3], 64 * 1024 - 1);
 #ifndef APM_RELAX_SEGMENTS
 		} else {
-			_set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS >> 3],
+			_set_limit((char *)&gdt[APM_CS >> 3],
 				(apm_info.bios.cseg_len - 1) & 0xffff);
-			_set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS_16 >> 3],
+			_set_limit((char *)&gdt[APM_CS_16 >> 3],
 				(apm_info.bios.cseg_16_len - 1) & 0xffff);
-			_set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_DS >> 3],
+			_set_limit((char *)&gdt[APM_DS >> 3],
 				(apm_info.bios.dseg_len - 1) & 0xffff);
 		      /* workaround for broken BIOSes */
 	                if (apm_info.bios.cseg_len <= apm_info.bios.offset)
-        	                _set_limit((char *)&per_cpu(cpu_gdt_table, i)[APM_CS >> 3], 64 * 1024 -1);
+        	                _set_limit((char *)&gdt[APM_CS >> 3], 64 * 1024 -1);
                        if (apm_info.bios.dseg_len <= 0x40) { /* 0x40 * 4kB == 64kB */
                         	/* for the BIOS that assumes granularity = 1 */
-                        	per_cpu(cpu_gdt_table, i)[APM_DS >> 3].b |= 0x800000;
+                        	gdt[APM_DS >> 3].b |= 0x800000;
                         	printk(KERN_NOTICE "apm: we set the granularity of dseg.\n");
         	        }
 		}
diff --git a/arch/i386/kernel/cpu/common.c b/arch/i386/kernel/cpu/common.c
index 9ad43be9a01f..74145a33cb0f 100644
--- a/arch/i386/kernel/cpu/common.c
+++ b/arch/i386/kernel/cpu/common.c
@@ -573,6 +573,7 @@ void __devinit cpu_init(void)
 	int cpu = smp_processor_id();
 	struct tss_struct * t = &per_cpu(init_tss, cpu);
 	struct thread_struct *thread = &current->thread;
+	struct desc_struct *gdt = get_cpu_gdt_table(cpu);
 	__u32 stk16_off = (__u32)&per_cpu(cpu_16bit_stack, cpu);
 
 	if (cpu_test_and_set(cpu, cpu_initialized)) {
@@ -594,24 +595,16 @@ void __devinit cpu_init(void)
 	 * Initialize the per-CPU GDT with the boot GDT,
 	 * and set up the GDT descriptor:
 	 */
-	memcpy(&per_cpu(cpu_gdt_table, cpu), cpu_gdt_table,
-	       GDT_SIZE);
+ 	memcpy(gdt, cpu_gdt_table, GDT_SIZE);
 
 	/* Set up GDT entry for 16bit stack */
-	*(__u64 *)&(per_cpu(cpu_gdt_table, cpu)[GDT_ENTRY_ESPFIX_SS]) |=
+ 	*(__u64 *)(&gdt[GDT_ENTRY_ESPFIX_SS]) |=
 		((((__u64)stk16_off) << 16) & 0x000000ffffff0000ULL) |
 		((((__u64)stk16_off) << 32) & 0xff00000000000000ULL) |
 		(CPU_16BIT_STACK_SIZE - 1);
 
 	cpu_gdt_descr[cpu].size = GDT_SIZE - 1;
-	cpu_gdt_descr[cpu].address =
-	    (unsigned long)&per_cpu(cpu_gdt_table, cpu);
-
-	/*
-	 * Set up the per-thread TLS descriptor cache:
-	 */
-	memcpy(thread->tls_array, &per_cpu(cpu_gdt_table, cpu),
-		GDT_ENTRY_TLS_ENTRIES * 8);
+ 	cpu_gdt_descr[cpu].address = (unsigned long)gdt;
 
 	load_gdt(&cpu_gdt_descr[cpu]);
 	load_idt(&idt_descr);
diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
index 822c8ce9d1f1..caa9f7711343 100644
--- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -32,6 +32,7 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/compiler.h>
+#include <linux/sched.h>	/* current */
 #include <asm/io.h>
 #include <asm/delay.h>
 #include <asm/uaccess.h>
diff --git a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
index aa622d52c6e5..270f2188d68b 100644
--- a/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
@@ -28,6 +28,7 @@
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
 #include <linux/cpumask.h>
+#include <linux/sched.h>	/* current / set_cpus_allowed() */
 
 #include <asm/processor.h> 
 #include <asm/msr.h>
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
index 58ca98fdc2ca..2d5c9adba0cd 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
@@ -32,6 +32,7 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/cpumask.h>
+#include <linux/sched.h>	/* for current / set_cpus_allowed() */
 
 #include <asm/msr.h>
 #include <asm/io.h>
diff --git a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
index c397b6220430..1465974256c9 100644
--- a/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 #include <linux/config.h>
+#include <linux/sched.h>	/* current */
 #include <linux/delay.h>
 #include <linux/compiler.h>
 
diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c
index 9e0d5f83cb9f..4dc42a189ae5 100644
--- a/arch/i386/kernel/cpu/intel_cacheinfo.c
+++ b/arch/i386/kernel/cpu/intel_cacheinfo.c
@@ -3,6 +3,7 @@
  *
  *      Changes:
  *      Venkatesh Pallipadi	: Adding cache identification through cpuid(4)
+ *		Ashok Raj <ashok.raj@intel.com>: Work with CPU hotplug infrastructure.
  */
 
 #include <linux/init.h>
@@ -10,6 +11,7 @@
 #include <linux/device.h>
 #include <linux/compiler.h>
 #include <linux/cpu.h>
+#include <linux/sched.h>
 
 #include <asm/processor.h>
 #include <asm/smp.h>
@@ -28,7 +30,7 @@ struct _cache_table
 };
 
 /* all the cache descriptor types we care about (no TLB or trace cache entries) */
-static struct _cache_table cache_table[] __devinitdata =
+static struct _cache_table cache_table[] __cpuinitdata =
 {
 	{ 0x06, LVL_1_INST, 8 },	/* 4-way set assoc, 32 byte line size */
 	{ 0x08, LVL_1_INST, 16 },	/* 4-way set assoc, 32 byte line size */
@@ -117,10 +119,9 @@ struct _cpuid4_info {
 	cpumask_t shared_cpu_map;
 };
 
-#define MAX_CACHE_LEAVES		4
 static unsigned short			num_cache_leaves;
 
-static int __devinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf)
+static int __cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf)
 {
 	unsigned int		eax, ebx, ecx, edx;
 	union _cpuid4_leaf_eax	cache_eax;
@@ -144,23 +145,18 @@ static int __init find_num_cache_leaves(void)
 {
 	unsigned int		eax, ebx, ecx, edx;
 	union _cpuid4_leaf_eax	cache_eax;
-	int 			i;
-	int 			retval;
+	int 			i = -1;
 
-	retval = MAX_CACHE_LEAVES;
-	/* Do cpuid(4) loop to find out num_cache_leaves */
-	for (i = 0; i < MAX_CACHE_LEAVES; i++) {
+	do {
+		++i;
+		/* Do cpuid(4) loop to find out num_cache_leaves */
 		cpuid_count(4, i, &eax, &ebx, &ecx, &edx);
 		cache_eax.full = eax;
-		if (cache_eax.split.type == CACHE_TYPE_NULL) {
-			retval = i;
-			break;
-		}
-	}
-	return retval;
+	} while (cache_eax.split.type != CACHE_TYPE_NULL);
+	return i;
 }
 
-unsigned int __devinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
+unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
 {
 	unsigned int trace = 0, l1i = 0, l1d = 0, l2 = 0, l3 = 0; /* Cache sizes */
 	unsigned int new_l1d = 0, new_l1i = 0; /* Cache sizes from cpuid(4) */
@@ -284,13 +280,7 @@ unsigned int __devinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
 		if ( l3 )
 			printk(KERN_INFO "CPU: L3 cache: %dK\n", l3);
 
-		/*
-		 * This assumes the L3 cache is shared; it typically lives in
-		 * the northbridge.  The L1 caches are included by the L2
-		 * cache, and so should not be included for the purpose of
-		 * SMP switching weights.
-		 */
-		c->x86_cache_size = l2 ? l2 : (l1i+l1d);
+		c->x86_cache_size = l3 ? l3 : (l2 ? l2 : (l1i+l1d));
 	}
 
 	return l2;
@@ -301,7 +291,7 @@ static struct _cpuid4_info *cpuid4_info[NR_CPUS];
 #define CPUID4_INFO_IDX(x,y)    (&((cpuid4_info[x])[y]))
 
 #ifdef CONFIG_SMP
-static void __devinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
+static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
 {
 	struct _cpuid4_info	*this_leaf;
 	unsigned long num_threads_sharing;
@@ -334,7 +324,7 @@ static void free_cache_attributes(unsigned int cpu)
 	cpuid4_info[cpu] = NULL;
 }
 
-static int __devinit detect_cache_attributes(unsigned int cpu)
+static int __cpuinit detect_cache_attributes(unsigned int cpu)
 {
 	struct _cpuid4_info	*this_leaf;
 	unsigned long 		j;
@@ -511,7 +501,7 @@ static void cpuid4_cache_sysfs_exit(unsigned int cpu)
 	free_cache_attributes(cpu);
 }
 
-static int __devinit cpuid4_cache_sysfs_init(unsigned int cpu)
+static int __cpuinit cpuid4_cache_sysfs_init(unsigned int cpu)
 {
 
 	if (num_cache_leaves == 0)
@@ -542,7 +532,7 @@ err_out:
 }
 
 /* Add/Remove cache interface for CPU device */
-static int __devinit cache_add_dev(struct sys_device * sys_dev)
+static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
 {
 	unsigned int cpu = sys_dev->id;
 	unsigned long i, j;
@@ -579,7 +569,7 @@ static int __devinit cache_add_dev(struct sys_device * sys_dev)
 	return retval;
 }
 
-static int __devexit cache_remove_dev(struct sys_device * sys_dev)
+static void __cpuexit cache_remove_dev(struct sys_device * sys_dev)
 {
 	unsigned int cpu = sys_dev->id;
 	unsigned long i;
@@ -588,24 +578,49 @@ static int __devexit cache_remove_dev(struct sys_device * sys_dev)
 		kobject_unregister(&(INDEX_KOBJECT_PTR(cpu,i)->kobj));
 	kobject_unregister(cache_kobject[cpu]);
 	cpuid4_cache_sysfs_exit(cpu);
-	return 0;
+	return;
+}
+
+static int __cpuinit cacheinfo_cpu_callback(struct notifier_block *nfb,
+					unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (unsigned long)hcpu;
+	struct sys_device *sys_dev;
+
+	sys_dev = get_cpu_sysdev(cpu);
+	switch (action) {
+	case CPU_ONLINE:
+		cache_add_dev(sys_dev);
+		break;
+	case CPU_DEAD:
+		cache_remove_dev(sys_dev);
+		break;
+	}
+	return NOTIFY_OK;
 }
 
-static struct sysdev_driver cache_sysdev_driver = {
-	.add = cache_add_dev,
-	.remove = __devexit_p(cache_remove_dev),
+static struct notifier_block cacheinfo_cpu_notifier =
+{
+    .notifier_call = cacheinfo_cpu_callback,
 };
 
-/* Register/Unregister the cpu_cache driver */
-static int __devinit cache_register_driver(void)
+static int __cpuinit cache_sysfs_init(void)
 {
+	int i;
+
 	if (num_cache_leaves == 0)
 		return 0;
 
-	return sysdev_driver_register(&cpu_sysdev_class,&cache_sysdev_driver);
+	register_cpu_notifier(&cacheinfo_cpu_notifier);
+
+	for_each_online_cpu(i) {
+		cacheinfo_cpu_callback(&cacheinfo_cpu_notifier, CPU_ONLINE,
+			(void *)(long)i);
+	}
+
+	return 0;
 }
 
-device_initcall(cache_register_driver);
+device_initcall(cache_sysfs_init);
 
 #endif
-
diff --git a/arch/i386/kernel/cpu/mcheck/p6.c b/arch/i386/kernel/cpu/mcheck/p6.c
index 3c035b8fa3d9..979b18bc95c1 100644
--- a/arch/i386/kernel/cpu/mcheck/p6.c
+++ b/arch/i386/kernel/cpu/mcheck/p6.c
@@ -102,11 +102,16 @@ void __devinit intel_p6_mcheck_init(struct cpuinfo_x86 *c)
 		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
 	nr_mce_banks = l & 0xff;
 
-	/* Don't enable bank 0 on intel P6 cores, it goes bang quickly. */
-	for (i=1; i<nr_mce_banks; i++) {
+	/*
+	 * Following the example in IA-32 SDM Vol 3:
+	 * - MC0_CTL should not be written
+	 * - Status registers on all banks should be cleared on reset
+	 */
+	for (i=1; i<nr_mce_banks; i++)
 		wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
+
+	for (i=0; i<nr_mce_banks; i++)
 		wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
-	}
 
 	set_in_cr4 (X86_CR4_MCE);
 	printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
diff --git a/arch/i386/kernel/cpu/mtrr/if.c b/arch/i386/kernel/cpu/mtrr/if.c
index 1923e0aed26a..cf39e205d33c 100644
--- a/arch/i386/kernel/cpu/mtrr/if.c
+++ b/arch/i386/kernel/cpu/mtrr/if.c
@@ -149,60 +149,89 @@ mtrr_write(struct file *file, const char __user *buf, size_t len, loff_t * ppos)
 	return -EINVAL;
 }
 
-static int
-mtrr_ioctl(struct inode *inode, struct file *file,
-	   unsigned int cmd, unsigned long __arg)
+static long
+mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg)
 {
-	int err;
+	int err = 0;
 	mtrr_type type;
 	struct mtrr_sentry sentry;
 	struct mtrr_gentry gentry;
 	void __user *arg = (void __user *) __arg;
 
 	switch (cmd) {
+	case MTRRIOC_ADD_ENTRY:
+	case MTRRIOC_SET_ENTRY:
+	case MTRRIOC_DEL_ENTRY:
+	case MTRRIOC_KILL_ENTRY:
+	case MTRRIOC_ADD_PAGE_ENTRY:
+	case MTRRIOC_SET_PAGE_ENTRY:
+	case MTRRIOC_DEL_PAGE_ENTRY:
+	case MTRRIOC_KILL_PAGE_ENTRY:
+		if (copy_from_user(&sentry, arg, sizeof sentry))
+			return -EFAULT;
+		break;
+	case MTRRIOC_GET_ENTRY:
+	case MTRRIOC_GET_PAGE_ENTRY:
+		if (copy_from_user(&gentry, arg, sizeof gentry))
+			return -EFAULT;
+		break;
+#ifdef CONFIG_COMPAT
+	case MTRRIOC32_ADD_ENTRY:
+	case MTRRIOC32_SET_ENTRY:
+	case MTRRIOC32_DEL_ENTRY:
+	case MTRRIOC32_KILL_ENTRY:
+	case MTRRIOC32_ADD_PAGE_ENTRY:
+	case MTRRIOC32_SET_PAGE_ENTRY:
+	case MTRRIOC32_DEL_PAGE_ENTRY:
+	case MTRRIOC32_KILL_PAGE_ENTRY: {
+		struct mtrr_sentry32 __user *s32 = (struct mtrr_sentry32 __user *)__arg;
+		err = get_user(sentry.base, &s32->base);
+		err |= get_user(sentry.size, &s32->size);
+		err |= get_user(sentry.type, &s32->type);
+		if (err)
+			return err;
+		break;
+	}
+	case MTRRIOC32_GET_ENTRY:
+	case MTRRIOC32_GET_PAGE_ENTRY: {
+		struct mtrr_gentry32 __user *g32 = (struct mtrr_gentry32 __user *)__arg;
+		err = get_user(gentry.regnum, &g32->regnum);
+		err |= get_user(gentry.base, &g32->base);
+		err |= get_user(gentry.size, &g32->size);
+		err |= get_user(gentry.type, &g32->type);
+		if (err)
+			return err;
+		break;
+	}
+#endif
+	}
+
+	switch (cmd) {
 	default:
 		return -ENOTTY;
 	case MTRRIOC_ADD_ENTRY:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		if (copy_from_user(&sentry, arg, sizeof sentry))
-			return -EFAULT;
 		err =
 		    mtrr_file_add(sentry.base, sentry.size, sentry.type, 1,
 				  file, 0);
-		if (err < 0)
-			return err;
 		break;
 	case MTRRIOC_SET_ENTRY:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		if (copy_from_user(&sentry, arg, sizeof sentry))
-			return -EFAULT;
 		err = mtrr_add(sentry.base, sentry.size, sentry.type, 0);
-		if (err < 0)
-			return err;
 		break;
 	case MTRRIOC_DEL_ENTRY:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		if (copy_from_user(&sentry, arg, sizeof sentry))
-			return -EFAULT;
 		err = mtrr_file_del(sentry.base, sentry.size, file, 0);
-		if (err < 0)
-			return err;
 		break;
 	case MTRRIOC_KILL_ENTRY:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		if (copy_from_user(&sentry, arg, sizeof sentry))
-			return -EFAULT;
 		err = mtrr_del(-1, sentry.base, sentry.size);
-		if (err < 0)
-			return err;
 		break;
 	case MTRRIOC_GET_ENTRY:
-		if (copy_from_user(&gentry, arg, sizeof gentry))
-			return -EFAULT;
 		if (gentry.regnum >= num_var_ranges)
 			return -EINVAL;
 		mtrr_if->get(gentry.regnum, &gentry.base, &gentry.size, &type);
@@ -217,60 +246,59 @@ mtrr_ioctl(struct inode *inode, struct file *file,
 			gentry.type = type;
 		}
 
-		if (copy_to_user(arg, &gentry, sizeof gentry))
-			return -EFAULT;
 		break;
 	case MTRRIOC_ADD_PAGE_ENTRY:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		if (copy_from_user(&sentry, arg, sizeof sentry))
-			return -EFAULT;
 		err =
 		    mtrr_file_add(sentry.base, sentry.size, sentry.type, 1,
 				  file, 1);
-		if (err < 0)
-			return err;
 		break;
 	case MTRRIOC_SET_PAGE_ENTRY:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		if (copy_from_user(&sentry, arg, sizeof sentry))
-			return -EFAULT;
 		err = mtrr_add_page(sentry.base, sentry.size, sentry.type, 0);
-		if (err < 0)
-			return err;
 		break;
 	case MTRRIOC_DEL_PAGE_ENTRY:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		if (copy_from_user(&sentry, arg, sizeof sentry))
-			return -EFAULT;
 		err = mtrr_file_del(sentry.base, sentry.size, file, 1);
-		if (err < 0)
-			return err;
 		break;
 	case MTRRIOC_KILL_PAGE_ENTRY:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		if (copy_from_user(&sentry, arg, sizeof sentry))
-			return -EFAULT;
 		err = mtrr_del_page(-1, sentry.base, sentry.size);
-		if (err < 0)
-			return err;
 		break;
 	case MTRRIOC_GET_PAGE_ENTRY:
-		if (copy_from_user(&gentry, arg, sizeof gentry))
-			return -EFAULT;
 		if (gentry.regnum >= num_var_ranges)
 			return -EINVAL;
 		mtrr_if->get(gentry.regnum, &gentry.base, &gentry.size, &type);
 		gentry.type = type;
+		break;
+	}
+
+	if (err)
+		return err;
 
+	switch(cmd) {
+	case MTRRIOC_GET_ENTRY:
+	case MTRRIOC_GET_PAGE_ENTRY:
 		if (copy_to_user(arg, &gentry, sizeof gentry))
-			return -EFAULT;
+			err = -EFAULT;
+		break;
+#ifdef CONFIG_COMPAT
+	case MTRRIOC32_GET_ENTRY:
+	case MTRRIOC32_GET_PAGE_ENTRY: {
+		struct mtrr_gentry32 __user *g32 = (struct mtrr_gentry32 __user *)__arg;
+		err = put_user(gentry.base, &g32->base);
+		err |= put_user(gentry.size, &g32->size);
+		err |= put_user(gentry.regnum, &g32->regnum);
+		err |= put_user(gentry.type, &g32->type);
 		break;
 	}
-	return 0;
+#endif
+	}
+	return err;
 }
 
 static int
@@ -310,7 +338,8 @@ static struct file_operations mtrr_fops = {
 	.read    = seq_read,
 	.llseek  = seq_lseek,
 	.write   = mtrr_write,
-	.ioctl   = mtrr_ioctl,
+	.unlocked_ioctl = mtrr_ioctl,
+	.compat_ioctl = mtrr_ioctl,
 	.release = mtrr_close,
 };
 
diff --git a/arch/i386/kernel/cpu/proc.c b/arch/i386/kernel/cpu/proc.c
index 8bd77d948a84..41b871ecf4b3 100644
--- a/arch/i386/kernel/cpu/proc.c
+++ b/arch/i386/kernel/cpu/proc.c
@@ -44,7 +44,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 
 		/* Intel-defined (#2) */
-		"pni", NULL, NULL, "monitor", "ds_cpl", NULL, NULL, "est",
+		"pni", NULL, NULL, "monitor", "ds_cpl", "vmx", NULL, "est",
 		"tm2", NULL, "cid", NULL, NULL, "cx16", "xtpr", NULL,
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 		NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
diff --git a/arch/i386/kernel/crash.c b/arch/i386/kernel/crash.c
index 0248e084017c..af809ccf5fbe 100644
--- a/arch/i386/kernel/crash.c
+++ b/arch/i386/kernel/crash.c
@@ -21,7 +21,6 @@
 #include <asm/hardirq.h>
 #include <asm/nmi.h>
 #include <asm/hw_irq.h>
-#include <asm/apic.h>
 #include <mach_ipi.h>
 
 
@@ -148,7 +147,6 @@ static int crash_nmi_callback(struct pt_regs *regs, int cpu)
 		regs = &fixed_regs;
 	}
 	crash_save_this_cpu(regs, cpu);
-	disable_local_APIC();
 	atomic_dec(&waiting_for_crash_ipi);
 	/* Assume hlt works */
 	halt();
@@ -188,7 +186,6 @@ static void nmi_shootdown_cpus(void)
 	}
 
 	/* Leave the nmi callback set */
-	disable_local_APIC();
 }
 #else
 static void nmi_shootdown_cpus(void)
@@ -213,9 +210,5 @@ void machine_crash_shutdown(struct pt_regs *regs)
 	/* Make a note of crashing cpu. Will be used in NMI callback.*/
 	crashing_cpu = smp_processor_id();
 	nmi_shootdown_cpus();
-	lapic_shutdown();
-#if defined(CONFIG_X86_IO_APIC)
-	disable_IO_APIC();
-#endif
 	crash_save_self(regs);
 }
diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c
index fb3991e8229e..cc5d7ac5b2e7 100644
--- a/arch/i386/kernel/io_apic.c
+++ b/arch/i386/kernel/io_apic.c
@@ -46,6 +46,9 @@
 int (*ioapic_renumber_irq)(int ioapic, int irq);
 atomic_t irq_mis_count;
 
+/* Where if anywhere is the i8259 connect in external int mode */
+static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
+
 static DEFINE_SPINLOCK(ioapic_lock);
 
 /*
@@ -738,7 +741,7 @@ static int find_irq_entry(int apic, int pin, int type)
 /*
  * Find the pin to which IRQ[irq] (ISA) is connected
  */
-static int find_isa_irq_pin(int irq, int type)
+static int __init find_isa_irq_pin(int irq, int type)
 {
 	int i;
 
@@ -758,6 +761,33 @@ static int find_isa_irq_pin(int irq, int type)
 	return -1;
 }
 
+static int __init find_isa_irq_apic(int irq, int type)
+{
+	int i;
+
+	for (i = 0; i < mp_irq_entries; i++) {
+		int lbus = mp_irqs[i].mpc_srcbus;
+
+		if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA ||
+		     mp_bus_id_to_type[lbus] == MP_BUS_EISA ||
+		     mp_bus_id_to_type[lbus] == MP_BUS_MCA ||
+		     mp_bus_id_to_type[lbus] == MP_BUS_NEC98
+		    ) &&
+		    (mp_irqs[i].mpc_irqtype == type) &&
+		    (mp_irqs[i].mpc_srcbusirq == irq))
+			break;
+	}
+	if (i < mp_irq_entries) {
+		int apic;
+		for(apic = 0; apic < nr_ioapics; apic++) {
+			if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic)
+				return apic;
+		}
+	}
+
+	return -1;
+}
+
 /*
  * Find a specific PCI IRQ entry.
  * Not an __init, possibly needed by modules
@@ -1253,7 +1283,7 @@ static void __init setup_IO_APIC_irqs(void)
 /*
  * Set up the 8259A-master output pin:
  */
-static void __init setup_ExtINT_IRQ0_pin(unsigned int pin, int vector)
+static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector)
 {
 	struct IO_APIC_route_entry entry;
 	unsigned long flags;
@@ -1287,8 +1317,8 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int pin, int vector)
 	 * Add it to the IO-APIC irq-routing table:
 	 */
 	spin_lock_irqsave(&ioapic_lock, flags);
-	io_apic_write(0, 0x11+2*pin, *(((int *)&entry)+1));
-	io_apic_write(0, 0x10+2*pin, *(((int *)&entry)+0));
+	io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1));
+	io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0));
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 
 	enable_8259A_irq(0);
@@ -1595,7 +1625,8 @@ void /*__init*/ print_PIC(void)
 static void __init enable_IO_APIC(void)
 {
 	union IO_APIC_reg_01 reg_01;
-	int i;
+	int i8259_apic, i8259_pin;
+	int i, apic;
 	unsigned long flags;
 
 	for (i = 0; i < PIN_MAP_SIZE; i++) {
@@ -1609,11 +1640,52 @@ static void __init enable_IO_APIC(void)
 	/*
 	 * The number of IO-APIC IRQ registers (== #pins):
 	 */
-	for (i = 0; i < nr_ioapics; i++) {
+	for (apic = 0; apic < nr_ioapics; apic++) {
 		spin_lock_irqsave(&ioapic_lock, flags);
-		reg_01.raw = io_apic_read(i, 1);
+		reg_01.raw = io_apic_read(apic, 1);
 		spin_unlock_irqrestore(&ioapic_lock, flags);
-		nr_ioapic_registers[i] = reg_01.bits.entries+1;
+		nr_ioapic_registers[apic] = reg_01.bits.entries+1;
+	}
+	for(apic = 0; apic < nr_ioapics; apic++) {
+		int pin;
+		/* See if any of the pins is in ExtINT mode */
+		for(pin = 0; pin < nr_ioapic_registers[i]; pin++) {
+			struct IO_APIC_route_entry entry;
+			spin_lock_irqsave(&ioapic_lock, flags);
+			*(((int *)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
+			*(((int *)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
+			spin_unlock_irqrestore(&ioapic_lock, flags);
+
+
+			/* If the interrupt line is enabled and in ExtInt mode
+			 * I have found the pin where the i8259 is connected.
+			 */
+			if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) {
+				ioapic_i8259.apic = apic;
+				ioapic_i8259.pin  = pin;
+				goto found_i8259;
+			}
+		}
+	}
+ found_i8259:
+	/* Look to see what if the MP table has reported the ExtINT */
+	/* If we could not find the appropriate pin by looking at the ioapic
+	 * the i8259 probably is not connected the ioapic but give the
+	 * mptable a chance anyway.
+	 */
+	i8259_pin  = find_isa_irq_pin(0, mp_ExtINT);
+	i8259_apic = find_isa_irq_apic(0, mp_ExtINT);
+	/* Trust the MP table if nothing is setup in the hardware */
+	if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) {
+		printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n");
+		ioapic_i8259.pin  = i8259_pin;
+		ioapic_i8259.apic = i8259_apic;
+	}
+	/* Complain if the MP table and the hardware disagree */
+	if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) &&
+		(i8259_pin >= 0) && (ioapic_i8259.pin >= 0))
+	{
+		printk(KERN_WARNING "ExtINT in hardware and MP table differ\n");
 	}
 
 	/*
@@ -1627,7 +1699,6 @@ static void __init enable_IO_APIC(void)
  */
 void disable_IO_APIC(void)
 {
-	int pin;
 	/*
 	 * Clear the IO-APIC before rebooting:
 	 */
@@ -1638,8 +1709,7 @@ void disable_IO_APIC(void)
 	 * Put that IOAPIC in virtual wire mode
 	 * so legacy interrupts can be delivered.
 	 */
-	pin = find_isa_irq_pin(0, mp_ExtINT);
-	if (pin != -1) {
+	if (ioapic_i8259.pin != -1) {
 		struct IO_APIC_route_entry entry;
 		unsigned long flags;
 
@@ -1650,7 +1720,7 @@ void disable_IO_APIC(void)
 		entry.polarity        = 0; /* High */
 		entry.delivery_status = 0;
 		entry.dest_mode       = 0; /* Physical */
-		entry.delivery_mode   = 7; /* ExtInt */
+		entry.delivery_mode   = dest_ExtINT; /* ExtInt */
 		entry.vector          = 0;
 		entry.dest.physical.physical_dest = 0;
 
@@ -1659,11 +1729,13 @@ void disable_IO_APIC(void)
 		 * Add it to the IO-APIC irq-routing table:
 		 */
 		spin_lock_irqsave(&ioapic_lock, flags);
-		io_apic_write(0, 0x11+2*pin, *(((int *)&entry)+1));
-		io_apic_write(0, 0x10+2*pin, *(((int *)&entry)+0));
+		io_apic_write(ioapic_i8259.apic, 0x11+2*ioapic_i8259.pin,
+			*(((int *)&entry)+1));
+		io_apic_write(ioapic_i8259.apic, 0x10+2*ioapic_i8259.pin,
+			*(((int *)&entry)+0));
 		spin_unlock_irqrestore(&ioapic_lock, flags);
 	}
-	disconnect_bsp_APIC(pin != -1);
+	disconnect_bsp_APIC(ioapic_i8259.pin != -1);
 }
 
 /*
@@ -2113,20 +2185,21 @@ static void setup_nmi (void)
  */
 static inline void unlock_ExtINT_logic(void)
 {
-	int pin, i;
+	int apic, pin, i;
 	struct IO_APIC_route_entry entry0, entry1;
 	unsigned char save_control, save_freq_select;
 	unsigned long flags;
 
-	pin = find_isa_irq_pin(8, mp_INT);
+	pin  = find_isa_irq_pin(8, mp_INT);
+	apic = find_isa_irq_apic(8, mp_INT);
 	if (pin == -1)
 		return;
 
 	spin_lock_irqsave(&ioapic_lock, flags);
-	*(((int *)&entry0) + 1) = io_apic_read(0, 0x11 + 2 * pin);
-	*(((int *)&entry0) + 0) = io_apic_read(0, 0x10 + 2 * pin);
+	*(((int *)&entry0) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
+	*(((int *)&entry0) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
 	spin_unlock_irqrestore(&ioapic_lock, flags);
-	clear_IO_APIC_pin(0, pin);
+	clear_IO_APIC_pin(apic, pin);
 
 	memset(&entry1, 0, sizeof(entry1));
 
@@ -2139,8 +2212,8 @@ static inline void unlock_ExtINT_logic(void)
 	entry1.vector = 0;
 
 	spin_lock_irqsave(&ioapic_lock, flags);
-	io_apic_write(0, 0x11 + 2 * pin, *(((int *)&entry1) + 1));
-	io_apic_write(0, 0x10 + 2 * pin, *(((int *)&entry1) + 0));
+	io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry1) + 1));
+	io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry1) + 0));
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 
 	save_control = CMOS_READ(RTC_CONTROL);
@@ -2158,11 +2231,11 @@ static inline void unlock_ExtINT_logic(void)
 
 	CMOS_WRITE(save_control, RTC_CONTROL);
 	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
-	clear_IO_APIC_pin(0, pin);
+	clear_IO_APIC_pin(apic, pin);
 
 	spin_lock_irqsave(&ioapic_lock, flags);
-	io_apic_write(0, 0x11 + 2 * pin, *(((int *)&entry0) + 1));
-	io_apic_write(0, 0x10 + 2 * pin, *(((int *)&entry0) + 0));
+	io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry0) + 1));
+	io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry0) + 0));
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 }
 
@@ -2174,7 +2247,7 @@ static inline void unlock_ExtINT_logic(void)
  */
 static inline void check_timer(void)
 {
-	int pin1, pin2;
+	int apic1, pin1, apic2, pin2;
 	int vector;
 
 	/*
@@ -2196,10 +2269,13 @@ static inline void check_timer(void)
 	timer_ack = 1;
 	enable_8259A_irq(0);
 
-	pin1 = find_isa_irq_pin(0, mp_INT);
-	pin2 = find_isa_irq_pin(0, mp_ExtINT);
+	pin1  = find_isa_irq_pin(0, mp_INT);
+	apic1 = find_isa_irq_apic(0, mp_INT);
+	pin2  = ioapic_i8259.pin;
+	apic2 = ioapic_i8259.apic;
 
-	printk(KERN_INFO "..TIMER: vector=0x%02X pin1=%d pin2=%d\n", vector, pin1, pin2);
+	printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
+		vector, apic1, pin1, apic2, pin2);
 
 	if (pin1 != -1) {
 		/*
@@ -2216,8 +2292,9 @@ static inline void check_timer(void)
 				clear_IO_APIC_pin(0, pin1);
 			return;
 		}
-		clear_IO_APIC_pin(0, pin1);
-		printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to IO-APIC\n");
+		clear_IO_APIC_pin(apic1, pin1);
+		printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to "
+				"IO-APIC\n");
 	}
 
 	printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... ");
@@ -2226,13 +2303,13 @@ static inline void check_timer(void)
 		/*
 		 * legacy devices should be connected to IO APIC #0
 		 */
-		setup_ExtINT_IRQ0_pin(pin2, vector);
+		setup_ExtINT_IRQ0_pin(apic2, pin2, vector);
 		if (timer_irq_works()) {
 			printk("works.\n");
 			if (pin1 != -1)
-				replace_pin_at_irq(0, 0, pin1, 0, pin2);
+				replace_pin_at_irq(0, apic1, pin1, apic2, pin2);
 			else
-				add_pin_to_irq(0, 0, pin2);
+				add_pin_to_irq(0, apic2, pin2);
 			if (nmi_watchdog == NMI_IO_APIC) {
 				setup_nmi();
 			}
@@ -2241,7 +2318,7 @@ static inline void check_timer(void)
 		/*
 		 * Cleanup, just in case ...
 		 */
-		clear_IO_APIC_pin(0, pin2);
+		clear_IO_APIC_pin(apic2, pin2);
 	}
 	printk(" failed.\n");
 
diff --git a/arch/i386/kernel/irq.c b/arch/i386/kernel/irq.c
index ce66dcc26d90..1a201a932865 100644
--- a/arch/i386/kernel/irq.c
+++ b/arch/i386/kernel/irq.c
@@ -218,7 +218,7 @@ int show_interrupts(struct seq_file *p, void *v)
 
 	if (i == 0) {
 		seq_printf(p, "           ");
-		for_each_cpu(j)
+		for_each_online_cpu(j)
 			seq_printf(p, "CPU%d       ",j);
 		seq_putc(p, '\n');
 	}
@@ -232,7 +232,7 @@ int show_interrupts(struct seq_file *p, void *v)
 #ifndef CONFIG_SMP
 		seq_printf(p, "%10u ", kstat_irqs(i));
 #else
-		for_each_cpu(j)
+		for_each_online_cpu(j)
 			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
 #endif
 		seq_printf(p, " %14s", irq_desc[i].handler->typename);
@@ -246,12 +246,12 @@ skip:
 		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
 	} else if (i == NR_IRQS) {
 		seq_printf(p, "NMI: ");
-		for_each_cpu(j)
+		for_each_online_cpu(j)
 			seq_printf(p, "%10u ", nmi_count(j));
 		seq_putc(p, '\n');
 #ifdef CONFIG_X86_LOCAL_APIC
 		seq_printf(p, "LOC: ");
-		for_each_cpu(j)
+		for_each_online_cpu(j)
 			seq_printf(p, "%10u ",
 				per_cpu(irq_stat,j).apic_timer_irqs);
 		seq_putc(p, '\n');
diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c
index 27aabfceb67e..8f767d9aa45d 100644
--- a/arch/i386/kernel/mpparse.c
+++ b/arch/i386/kernel/mpparse.c
@@ -69,7 +69,7 @@ unsigned int def_to_bigsmp = 0;
 /* Processor that is doing the boot up */
 unsigned int boot_cpu_physical_apicid = -1U;
 /* Internal processor count */
-static unsigned int __initdata num_processors;
+static unsigned int __devinitdata num_processors;
 
 /* Bitmask of physically existing CPUs */
 physid_mask_t phys_cpu_present_map;
@@ -119,7 +119,7 @@ static int MP_valid_apicid(int apicid, int version)
 }
 #endif
 
-static void __init MP_processor_info (struct mpc_config_processor *m)
+static void __devinit MP_processor_info (struct mpc_config_processor *m)
 {
  	int ver, apicid;
 	physid_mask_t phys_cpu;
@@ -182,17 +182,6 @@ static void __init MP_processor_info (struct mpc_config_processor *m)
 		boot_cpu_physical_apicid = m->mpc_apicid;
 	}
 
-	if (num_processors >= NR_CPUS) {
-		printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
-			"  Processor ignored.\n", NR_CPUS); 
-		return;
-	}
-
-	if (num_processors >= maxcpus) {
-		printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
-			" Processor ignored.\n", maxcpus); 
-		return;
-	}
 	ver = m->mpc_apicver;
 
 	if (!MP_valid_apicid(apicid, ver)) {
@@ -201,11 +190,6 @@ static void __init MP_processor_info (struct mpc_config_processor *m)
 		return;
 	}
 
-	cpu_set(num_processors, cpu_possible_map);
-	num_processors++;
-	phys_cpu = apicid_to_cpu_present(apicid);
-	physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu);
-
 	/*
 	 * Validate version
 	 */
@@ -216,6 +200,25 @@ static void __init MP_processor_info (struct mpc_config_processor *m)
 		ver = 0x10;
 	}
 	apic_version[m->mpc_apicid] = ver;
+
+	phys_cpu = apicid_to_cpu_present(apicid);
+	physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu);
+
+	if (num_processors >= NR_CPUS) {
+		printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
+			"  Processor ignored.\n", NR_CPUS);
+		return;
+	}
+
+	if (num_processors >= maxcpus) {
+		printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
+			" Processor ignored.\n", maxcpus);
+		return;
+	}
+
+	cpu_set(num_processors, cpu_possible_map);
+	num_processors++;
+
 	if ((num_processors > 8) &&
 	    APIC_XAPIC(ver) &&
 	    (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL))
@@ -834,7 +837,7 @@ void __init mp_register_lapic_address (
 }
 
 
-void __init mp_register_lapic (
+void __devinit mp_register_lapic (
 	u8			id, 
 	u8			enabled)
 {
diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c
index 72515b8a1b12..d661703ac1cb 100644
--- a/arch/i386/kernel/nmi.c
+++ b/arch/i386/kernel/nmi.c
@@ -100,16 +100,44 @@ int nmi_active;
 	(P4_CCCR_OVF_PMI0|P4_CCCR_THRESHOLD(15)|P4_CCCR_COMPLEMENT|	\
 	 P4_CCCR_COMPARE|P4_CCCR_REQUIRED|P4_CCCR_ESCR_SELECT(4)|P4_CCCR_ENABLE)
 
+#ifdef CONFIG_SMP
+/* The performance counters used by NMI_LOCAL_APIC don't trigger when
+ * the CPU is idle. To make sure the NMI watchdog really ticks on all
+ * CPUs during the test make them busy.
+ */
+static __init void nmi_cpu_busy(void *data)
+{
+	volatile int *endflag = data;
+	local_irq_enable();
+	/* Intentionally don't use cpu_relax here. This is
+	   to make sure that the performance counter really ticks,
+	   even if there is a simulator or similar that catches the
+	   pause instruction. On a real HT machine this is fine because
+	   all other CPUs are busy with "useless" delay loops and don't
+	   care if they get somewhat less cycles. */
+	while (*endflag == 0)
+		barrier();
+}
+#endif
+
 static int __init check_nmi_watchdog(void)
 {
-	unsigned int prev_nmi_count[NR_CPUS];
+	volatile int endflag = 0;
+	unsigned int *prev_nmi_count;
 	int cpu;
 
 	if (nmi_watchdog == NMI_NONE)
 		return 0;
 
+	prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
+	if (!prev_nmi_count)
+		return -1;
+
 	printk(KERN_INFO "Testing NMI watchdog ... ");
 
+	if (nmi_watchdog == NMI_LOCAL_APIC)
+		smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0);
+
 	for (cpu = 0; cpu < NR_CPUS; cpu++)
 		prev_nmi_count[cpu] = per_cpu(irq_stat, cpu).__nmi_count;
 	local_irq_enable();
@@ -123,12 +151,18 @@ static int __init check_nmi_watchdog(void)
 			continue;
 #endif
 		if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) {
-			printk("CPU#%d: NMI appears to be stuck!\n", cpu);
+			endflag = 1;
+			printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n",
+				cpu,
+				prev_nmi_count[cpu],
+				nmi_count(cpu));
 			nmi_active = 0;
 			lapic_nmi_owner &= ~LAPIC_NMI_WATCHDOG;
+			kfree(prev_nmi_count);
 			return -1;
 		}
 	}
+	endflag = 1;
 	printk("OK.\n");
 
 	/* now that we know it works we can reduce NMI frequency to
@@ -136,6 +170,7 @@ static int __init check_nmi_watchdog(void)
 	if (nmi_watchdog == NMI_LOCAL_APIC)
 		nmi_hz = 1;
 
+	kfree(prev_nmi_count);
 	return 0;
 }
 /* This needs to happen later in boot so counters are working */
diff --git a/arch/i386/kernel/ptrace.c b/arch/i386/kernel/ptrace.c
index 7b6368bf8974..efd11f09c996 100644
--- a/arch/i386/kernel/ptrace.c
+++ b/arch/i386/kernel/ptrace.c
@@ -354,7 +354,7 @@ ptrace_set_thread_area(struct task_struct *child,
 	return 0;
 }
 
-asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
+asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
 {
 	struct task_struct *child;
 	struct user * dummy = NULL;
diff --git a/arch/i386/kernel/reboot_fixups.c b/arch/i386/kernel/reboot_fixups.c
index 1b183b378c2c..c9b87330aeea 100644
--- a/arch/i386/kernel/reboot_fixups.c
+++ b/arch/i386/kernel/reboot_fixups.c
@@ -44,7 +44,7 @@ void mach_reboot_fixups(void)
 
 	for (i=0; i < (sizeof(fixups_table)/sizeof(fixups_table[0])); i++) {
 		cur = &(fixups_table[i]);
-		dev = pci_get_device(cur->vendor, cur->device, 0);
+		dev = pci_get_device(cur->vendor, cur->device, NULL);
 		if (!dev)
 			continue;
 
diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
index 9b8c8a19824d..b48ac635f3c1 100644
--- a/arch/i386/kernel/setup.c
+++ b/arch/i386/kernel/setup.c
@@ -389,14 +389,24 @@ static void __init limit_regions(unsigned long long size)
 		}
 	}
 	for (i = 0; i < e820.nr_map; i++) {
-		if (e820.map[i].type == E820_RAM) {
-			current_addr = e820.map[i].addr + e820.map[i].size;
-			if (current_addr >= size) {
-				e820.map[i].size -= current_addr-size;
-				e820.nr_map = i + 1;
-				return;
-			}
+		current_addr = e820.map[i].addr + e820.map[i].size;
+		if (current_addr < size)
+			continue;
+
+		if (e820.map[i].type != E820_RAM)
+			continue;
+
+		if (e820.map[i].addr >= size) {
+			/*
+			 * This region starts past the end of the
+			 * requested size, skip it completely.
+			 */
+			e820.nr_map = i;
+		} else {
+			e820.nr_map = i + 1;
+			e820.map[i].size -= current_addr - size;
 		}
+		return;
 	}
 }
 
diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c
index 1fb26d0e30b6..01b618e73ecd 100644
--- a/arch/i386/kernel/smpboot.c
+++ b/arch/i386/kernel/smpboot.c
@@ -87,7 +87,11 @@ EXPORT_SYMBOL(cpu_online_map);
 cpumask_t cpu_callin_map;
 cpumask_t cpu_callout_map;
 EXPORT_SYMBOL(cpu_callout_map);
+#ifdef CONFIG_HOTPLUG_CPU
+cpumask_t cpu_possible_map = CPU_MASK_ALL;
+#else
 cpumask_t cpu_possible_map;
+#endif
 EXPORT_SYMBOL(cpu_possible_map);
 static cpumask_t smp_commenced_mask;
 
diff --git a/arch/i386/kernel/srat.c b/arch/i386/kernel/srat.c
index 516bf5653b02..8de658db8146 100644
--- a/arch/i386/kernel/srat.c
+++ b/arch/i386/kernel/srat.c
@@ -327,7 +327,12 @@ int __init get_memcfg_from_srat(void)
 	int tables = 0;
 	int i = 0;
 
-	acpi_find_root_pointer(ACPI_PHYSICAL_ADDRESSING, rsdp_address);
+	if (ACPI_FAILURE(acpi_find_root_pointer(ACPI_PHYSICAL_ADDRESSING,
+						rsdp_address))) {
+		printk("%s: System description tables not found\n",
+		       __FUNCTION__);
+		goto out_err;
+	}
 
 	if (rsdp_address->pointer_type == ACPI_PHYSICAL_POINTER) {
 		printk("%s: assigning address to rsdp\n", __FUNCTION__);
diff --git a/arch/i386/kernel/time.c b/arch/i386/kernel/time.c
index 2883a4d4f01f..41c5b2dc6200 100644
--- a/arch/i386/kernel/time.c
+++ b/arch/i386/kernel/time.c
@@ -74,10 +74,6 @@ int pit_latch_buggy;              /* extern */
 
 #include "do_timer.h"
 
-u64 jiffies_64 = INITIAL_JIFFIES;
-
-EXPORT_SYMBOL(jiffies_64);
-
 unsigned int cpu_khz;	/* Detected as we calibrate the TSC */
 EXPORT_SYMBOL(cpu_khz);
 
diff --git a/arch/i386/kernel/time_hpet.c b/arch/i386/kernel/time_hpet.c
index 658c0629ba6a..9caeaa315cd7 100644
--- a/arch/i386/kernel/time_hpet.c
+++ b/arch/i386/kernel/time_hpet.c
@@ -275,6 +275,7 @@ static unsigned long PIE_freq = DEFAULT_RTC_INT_FREQ;
 static unsigned long PIE_count;
 
 static unsigned long hpet_rtc_int_freq; /* RTC interrupt frequency */
+static unsigned int hpet_t1_cmp; /* cached comparator register */
 
 /*
  * Timer 1 for RTC, we do not use periodic interrupt feature,
@@ -306,10 +307,12 @@ int hpet_rtc_timer_init(void)
 	cnt = hpet_readl(HPET_COUNTER);
 	cnt += ((hpet_tick*HZ)/hpet_rtc_int_freq);
 	hpet_writel(cnt, HPET_T1_CMP);
+	hpet_t1_cmp = cnt;
 	local_irq_restore(flags);
 
 	cfg = hpet_readl(HPET_T1_CFG);
-	cfg |= HPET_TN_ENABLE | HPET_TN_SETVAL | HPET_TN_32BIT;
+	cfg &= ~HPET_TN_PERIODIC;
+	cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
 	hpet_writel(cfg, HPET_T1_CFG);
 
 	return 1;
@@ -319,8 +322,12 @@ static void hpet_rtc_timer_reinit(void)
 {
 	unsigned int cfg, cnt;
 
-	if (!(PIE_on | AIE_on | UIE_on))
+	if (unlikely(!(PIE_on | AIE_on | UIE_on))) {
+		cfg = hpet_readl(HPET_T1_CFG);
+		cfg &= ~HPET_TN_ENABLE;
+		hpet_writel(cfg, HPET_T1_CFG);
 		return;
+	}
 
 	if (PIE_on && (PIE_freq > DEFAULT_RTC_INT_FREQ))
 		hpet_rtc_int_freq = PIE_freq;
@@ -328,15 +335,10 @@ static void hpet_rtc_timer_reinit(void)
 		hpet_rtc_int_freq = DEFAULT_RTC_INT_FREQ;
 
 	/* It is more accurate to use the comparator value than current count.*/
-	cnt = hpet_readl(HPET_T1_CMP);
+	cnt = hpet_t1_cmp;
 	cnt += hpet_tick*HZ/hpet_rtc_int_freq;
 	hpet_writel(cnt, HPET_T1_CMP);
-
-	cfg = hpet_readl(HPET_T1_CFG);
-	cfg |= HPET_TN_ENABLE | HPET_TN_SETVAL | HPET_TN_32BIT;
-	hpet_writel(cfg, HPET_T1_CFG);
-
-	return;
+	hpet_t1_cmp = cnt;
 }
 
 /*
diff --git a/arch/i386/kernel/timers/timer_hpet.c b/arch/i386/kernel/timers/timer_hpet.c
index d973a8b681fd..be242723c339 100644
--- a/arch/i386/kernel/timers/timer_hpet.c
+++ b/arch/i386/kernel/timers/timer_hpet.c
@@ -30,23 +30,28 @@ static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED;
  *  basic equation:
  *		ns = cycles / (freq / ns_per_sec)
  *		ns = cycles * (ns_per_sec / freq)
- *		ns = cycles * (10^9 / (cpu_mhz * 10^6))
- *		ns = cycles * (10^3 / cpu_mhz)
+ *		ns = cycles * (10^9 / (cpu_khz * 10^3))
+ *		ns = cycles * (10^6 / cpu_khz)
  *
  *	Then we use scaling math (suggested by george@mvista.com) to get:
- *		ns = cycles * (10^3 * SC / cpu_mhz) / SC
+ *		ns = cycles * (10^6 * SC / cpu_khz) / SC
  *		ns = cycles * cyc2ns_scale / SC
  *
  *	And since SC is a constant power of two, we can convert the div
  *  into a shift.
+ *
+ *  We can use khz divisor instead of mhz to keep a better percision, since
+ *  cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
+ *  (mathieu.desnoyers@polymtl.ca)
+ *
  *			-johnstul@us.ibm.com "math is hard, lets go shopping!"
  */
 static unsigned long cyc2ns_scale;
 #define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
 
-static inline void set_cyc2ns_scale(unsigned long cpu_mhz)
+static inline void set_cyc2ns_scale(unsigned long cpu_khz)
 {
-	cyc2ns_scale = (1000 << CYC2NS_SCALE_FACTOR)/cpu_mhz;
+	cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz;
 }
 
 static inline unsigned long long cycles_2_ns(unsigned long long cyc)
@@ -163,7 +168,7 @@ static int __init init_hpet(char* override)
 				printk("Detected %u.%03u MHz processor.\n",
 					cpu_khz / 1000, cpu_khz % 1000);
 			}
-			set_cyc2ns_scale(cpu_khz/1000);
+			set_cyc2ns_scale(cpu_khz);
 		}
 		/* set this only when cpu_has_tsc */
 		timer_hpet.read_timer = read_timer_tsc;
diff --git a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c
index 6dd470cc9f72..d395e3b42485 100644
--- a/arch/i386/kernel/timers/timer_tsc.c
+++ b/arch/i386/kernel/timers/timer_tsc.c
@@ -49,23 +49,28 @@ static seqlock_t monotonic_lock = SEQLOCK_UNLOCKED;
  *  basic equation:
  *		ns = cycles / (freq / ns_per_sec)
  *		ns = cycles * (ns_per_sec / freq)
- *		ns = cycles * (10^9 / (cpu_mhz * 10^6))
- *		ns = cycles * (10^3 / cpu_mhz)
+ *		ns = cycles * (10^9 / (cpu_khz * 10^3))
+ *		ns = cycles * (10^6 / cpu_khz)
  *
  *	Then we use scaling math (suggested by george@mvista.com) to get:
- *		ns = cycles * (10^3 * SC / cpu_mhz) / SC
+ *		ns = cycles * (10^6 * SC / cpu_khz) / SC
  *		ns = cycles * cyc2ns_scale / SC
  *
  *	And since SC is a constant power of two, we can convert the div
- *  into a shift.   
+ *  into a shift.
+ *
+ *  We can use khz divisor instead of mhz to keep a better percision, since
+ *  cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
+ *  (mathieu.desnoyers@polymtl.ca)
+ *
  *			-johnstul@us.ibm.com "math is hard, lets go shopping!"
  */
 static unsigned long cyc2ns_scale; 
 #define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
 
-static inline void set_cyc2ns_scale(unsigned long cpu_mhz)
+static inline void set_cyc2ns_scale(unsigned long cpu_khz)
 {
-	cyc2ns_scale = (1000 << CYC2NS_SCALE_FACTOR)/cpu_mhz;
+	cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz;
 }
 
 static inline unsigned long long cycles_2_ns(unsigned long long cyc)
@@ -286,7 +291,7 @@ time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 		if (use_tsc) {
 			if (!(freq->flags & CPUFREQ_CONST_LOOPS)) {
 				fast_gettimeoffset_quotient = cpufreq_scale(fast_gettimeoffset_ref, freq->new, ref_freq);
-				set_cyc2ns_scale(cpu_khz/1000);
+				set_cyc2ns_scale(cpu_khz);
 			}
 		}
 #endif
@@ -536,7 +541,7 @@ static int __init init_tsc(char* override)
 				printk("Detected %u.%03u MHz processor.\n",
 					cpu_khz / 1000, cpu_khz % 1000);
 			}
-			set_cyc2ns_scale(cpu_khz/1000);
+			set_cyc2ns_scale(cpu_khz);
 			return 0;
 		}
 	}
diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c
index 19e90bdd84ea..c34d1bfc5161 100644
--- a/arch/i386/kernel/traps.c
+++ b/arch/i386/kernel/traps.c
@@ -488,6 +488,7 @@ fastcall void __kprobes do_general_protection(struct pt_regs * regs,
 				tss->io_bitmap_max - thread->io_bitmap_max);
 		tss->io_bitmap_max = thread->io_bitmap_max;
 		tss->io_bitmap_base = IO_BITMAP_OFFSET;
+		tss->io_bitmap_owner = thread;
 		put_cpu();
 		return;
 	}
diff --git a/arch/i386/mach-es7000/es7000.h b/arch/i386/mach-es7000/es7000.h
index 898ed905e119..f1e3204f5dec 100644
--- a/arch/i386/mach-es7000/es7000.h
+++ b/arch/i386/mach-es7000/es7000.h
@@ -24,6 +24,15 @@
  * http://www.unisys.com
  */
 
+/*
+ * ES7000 chipsets
+ */
+
+#define NON_UNISYS		0
+#define ES7000_CLASSIC		1
+#define ES7000_ZORRO		2
+
+
 #define	MIP_REG			1
 #define	MIP_PSAI_REG		4
 
@@ -106,6 +115,6 @@ struct mip_reg {
 
 extern int parse_unisys_oem (char *oemptr);
 extern int find_unisys_acpi_oem_table(unsigned long *oem_addr);
-extern void setup_unisys ();
+extern void setup_unisys(void);
 extern int es7000_start_cpu(int cpu, unsigned long eip);
 extern void es7000_sw_apic(void);
diff --git a/arch/i386/mach-es7000/es7000plat.c b/arch/i386/mach-es7000/es7000plat.c
index dc6660511b07..a9ab0644f403 100644
--- a/arch/i386/mach-es7000/es7000plat.c
+++ b/arch/i386/mach-es7000/es7000plat.c
@@ -62,6 +62,9 @@ static unsigned int base;
 static int
 es7000_rename_gsi(int ioapic, int gsi)
 {
+	if (es7000_plat == ES7000_ZORRO)
+		return gsi;
+
 	if (!base) {
 		int i;
 		for (i = 0; i < nr_ioapics; i++)
@@ -76,7 +79,7 @@ es7000_rename_gsi(int ioapic, int gsi)
 #endif	/* (CONFIG_X86_IO_APIC) && (CONFIG_ACPI) */
 
 void __init
-setup_unisys ()
+setup_unisys(void)
 {
 	/*
 	 * Determine the generation of the ES7000 currently running.
@@ -86,9 +89,9 @@ setup_unisys ()
 	 *
 	 */
 	if (!(boot_cpu_data.x86 <= 15 && boot_cpu_data.x86_model <= 2))
-		es7000_plat = 2;
+		es7000_plat = ES7000_ZORRO;
 	else
-		es7000_plat = 1;
+		es7000_plat = ES7000_CLASSIC;
 	ioapic_renumber_irq = es7000_rename_gsi;
 }
 
@@ -151,7 +154,7 @@ parse_unisys_oem (char *oemptr)
 	}
 
 	if (success < 2) {
-		es7000_plat = 0;
+		es7000_plat = NON_UNISYS;
 	} else
 		setup_unisys();
 	return es7000_plat;
diff --git a/arch/i386/mm/fault.c b/arch/i386/mm/fault.c
index 9edd4485b91e..cf572d9a3b6e 100644
--- a/arch/i386/mm/fault.c
+++ b/arch/i386/mm/fault.c
@@ -108,7 +108,7 @@ static inline unsigned long get_segment_eip(struct pt_regs *regs,
 		desc = (void *)desc + (seg & ~7);
 	} else {
 		/* Must disable preemption while reading the GDT. */
-		desc = (u32 *)&per_cpu(cpu_gdt_table, get_cpu());
+ 		desc = (u32 *)get_cpu_gdt_table(get_cpu());
 		desc = (void *)desc + (seg & ~7);
 	}
 
diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c
index 330fd2b68075..3984226a8b98 100644
--- a/arch/i386/pci/fixup.c
+++ b/arch/i386/pci/fixup.c
@@ -398,7 +398,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video);
  */
 static u16 toshiba_line_size;
 
-static struct dmi_system_id __devinit toshiba_ohci1394_dmi_table[] = {
+static struct dmi_system_id __devinitdata toshiba_ohci1394_dmi_table[] = {
 	{
 		.ident = "Toshiba PS5 based laptop",
 		.matches = {
diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c
index cddafe33ff7c..19e6f4871d1e 100644
--- a/arch/i386/pci/irq.c
+++ b/arch/i386/pci/irq.c
@@ -547,31 +547,48 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route
 	return 0;
 }
 
-static __init int via_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+static __init int via_router_probe(struct irq_router *r,
+				struct pci_dev *router, u16 device)
 {
 	/* FIXME: We should move some of the quirk fixup stuff here */
 
-	if (router->device == PCI_DEVICE_ID_VIA_82C686 &&
-			device == PCI_DEVICE_ID_VIA_82C586_0) {
-		/* Asus k7m bios wrongly reports 82C686A as 586-compatible */
-		device = PCI_DEVICE_ID_VIA_82C686;
+	/*
+	 * work arounds for some buggy BIOSes
+	 */
+	if (device == PCI_DEVICE_ID_VIA_82C586_0) {
+		switch(router->device) {
+		case PCI_DEVICE_ID_VIA_82C686:
+			/*
+			 * Asus k7m bios wrongly reports 82C686A
+			 * as 586-compatible
+			 */
+			device = PCI_DEVICE_ID_VIA_82C686;
+			break;
+		case PCI_DEVICE_ID_VIA_8235:
+			/**
+			 * Asus a7v-x bios wrongly reports 8235
+			 * as 586-compatible
+			 */
+			device = PCI_DEVICE_ID_VIA_8235;
+			break;
+		}
 	}
 
-	switch(device)
-	{
-		case PCI_DEVICE_ID_VIA_82C586_0:
-			r->name = "VIA";
-			r->get = pirq_via586_get;
-			r->set = pirq_via586_set;
-			return 1;
-		case PCI_DEVICE_ID_VIA_82C596:
-		case PCI_DEVICE_ID_VIA_82C686:
-		case PCI_DEVICE_ID_VIA_8231:
+	switch(device) {
+	case PCI_DEVICE_ID_VIA_82C586_0:
+		r->name = "VIA";
+		r->get = pirq_via586_get;
+		r->set = pirq_via586_set;
+		return 1;
+	case PCI_DEVICE_ID_VIA_82C596:
+	case PCI_DEVICE_ID_VIA_82C686:
+	case PCI_DEVICE_ID_VIA_8231:
+	case PCI_DEVICE_ID_VIA_8235:
 		/* FIXME: add new ones for 8233/5 */
-			r->name = "VIA";
-			r->get = pirq_via_get;
-			r->set = pirq_via_set;
-			return 1;
+		r->name = "VIA";
+		r->get = pirq_via_get;
+		r->set = pirq_via_set;
+		return 1;
 	}
 	return 0;
 }
diff --git a/arch/i386/power/cpu.c b/arch/i386/power/cpu.c
index b27c5acc79d0..1f1572692e0b 100644
--- a/arch/i386/power/cpu.c
+++ b/arch/i386/power/cpu.c
@@ -51,16 +51,14 @@ void save_processor_state(void)
 	__save_processor_state(&saved_context);
 }
 
-static void
-do_fpu_end(void)
+static void do_fpu_end(void)
 {
-        /* restore FPU regs if necessary */
-	/* Do it out of line so that gcc does not move cr0 load to some stupid place */
-        kernel_fpu_end();
-	mxcsr_feature_mask_init();
+	/*
+	 * Restore FPU regs if necessary.
+	 */
+	kernel_fpu_end();
 }
 
-
 static void fix_processor_context(void)
 {
 	int cpu = smp_processor_id();