Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 347 insertions, 0 deletions

diff --git a/arch/m68k/atari/debug.c b/arch/m68k/atari/debug.c
new file mode 100644
index 000000000000..ace05f79d968
--- /dev/null
+++ b/arch/m68k/atari/debug.c
@@ -0,0 +1,347 @@
+/*
+ * linux/arch/m68k/atari/debug.c
+ *
+ * Atari debugging and serial console stuff
+ *
+ * Assembled of parts of former atari/config.c 97-12-18 by Roman Hodek
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/tty.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include <asm/atarihw.h>
+#include <asm/atariints.h>
+
+extern char m68k_debug_device[];
+
+/* Flag that Modem1 port is already initialized and used */
+int atari_MFP_init_done;
+/* Flag that Modem1 port is already initialized and used */
+int atari_SCC_init_done;
+/* Can be set somewhere, if a SCC master reset has already be done and should
+ * not be repeated; used by kgdb */
+int atari_SCC_reset_done;
+
+static struct console atari_console_driver = {
+	.name =		"debug",
+	.flags =	CON_PRINTBUFFER,
+	.index =	-1,
+};
+
+
+static inline void ata_mfp_out (char c)
+{
+    while (!(mfp.trn_stat & 0x80)) /* wait for tx buf empty */
+	barrier ();
+    mfp.usart_dta = c;
+}
+
+void atari_mfp_console_write (struct console *co, const char *str,
+			      unsigned int count)
+{
+    while (count--) {
+	if (*str == '\n')
+	    ata_mfp_out( '\r' );
+	ata_mfp_out( *str++ );
+    }
+}
+
+static inline void ata_scc_out (char c)
+{
+    do {
+	MFPDELAY();
+    } while (!(scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */
+    MFPDELAY();
+    scc.cha_b_data = c;
+}
+
+void atari_scc_console_write (struct console *co, const char *str,
+			      unsigned int count)
+{
+    while (count--) {
+	if (*str == '\n')
+	    ata_scc_out( '\r' );
+	ata_scc_out( *str++ );
+    }
+}
+
+static inline void ata_midi_out (char c)
+{
+    while (!(acia.mid_ctrl & ACIA_TDRE)) /* wait for tx buf empty */
+	barrier ();
+    acia.mid_data = c;
+}
+
+void atari_midi_console_write (struct console *co, const char *str,
+			       unsigned int count)
+{
+    while (count--) {
+	if (*str == '\n')
+	    ata_midi_out( '\r' );
+	ata_midi_out( *str++ );
+    }
+}
+
+static int ata_par_out (char c)
+{
+    unsigned char tmp;
+    /* This a some-seconds timeout in case no printer is connected */
+    unsigned long i = loops_per_jiffy > 1 ? loops_per_jiffy : 10000000/HZ;
+
+    while( (mfp.par_dt_reg & 1) && --i ) /* wait for BUSY == L */
+	;
+    if (!i) return( 0 );
+
+    sound_ym.rd_data_reg_sel = 15;  /* select port B */
+    sound_ym.wd_data = c;           /* put char onto port */
+    sound_ym.rd_data_reg_sel = 14;  /* select port A */
+    tmp = sound_ym.rd_data_reg_sel;
+    sound_ym.wd_data = tmp & ~0x20; /* set strobe L */
+    MFPDELAY();                     /* wait a bit */
+    sound_ym.wd_data = tmp | 0x20;  /* set strobe H */
+    return( 1 );
+}
+
+static void atari_par_console_write (struct console *co, const char *str,
+				     unsigned int count)
+{
+    static int printer_present = 1;
+
+    if (!printer_present)
+	return;
+
+    while (count--) {
+	if (*str == '\n')
+	    if (!ata_par_out( '\r' )) {
+		printer_present = 0;
+		return;
+	    }
+	if (!ata_par_out( *str++ )) {
+	    printer_present = 0;
+	    return;
+	}
+    }
+}
+
+#ifdef CONFIG_SERIAL_CONSOLE
+int atari_mfp_console_wait_key(struct console *co)
+{
+    while( !(mfp.rcv_stat & 0x80) ) /* wait for rx buf filled */
+	barrier();
+    return( mfp.usart_dta );
+}
+
+int atari_scc_console_wait_key(struct console *co)
+{
+    do {
+	MFPDELAY();
+    } while( !(scc.cha_b_ctrl & 0x01) ); /* wait for rx buf filled */
+    MFPDELAY();
+    return( scc.cha_b_data );
+}
+
+int atari_midi_console_wait_key(struct console *co)
+{
+    while( !(acia.mid_ctrl & ACIA_RDRF) ) /* wait for rx buf filled */
+	barrier();
+    return( acia.mid_data );
+}
+#endif
+
+/* The following two functions do a quick'n'dirty initialization of the MFP or
+ * SCC serial ports. They're used by the debugging interface, kgdb, and the
+ * serial console code. */
+#ifndef CONFIG_SERIAL_CONSOLE
+static void __init atari_init_mfp_port( int cflag )
+#else
+void atari_init_mfp_port( int cflag )
+#endif
+{
+    /* timer values for 1200...115200 bps; > 38400 select 110, 134, or 150
+     * bps, resp., and work only correct if there's a RSVE or RSSPEED */
+    static int baud_table[9] = { 16, 11, 8, 4, 2, 1, 175, 143, 128 };
+    int baud = cflag & CBAUD;
+    int parity = (cflag & PARENB) ? ((cflag & PARODD) ? 0x04 : 0x06) : 0;
+    int csize = ((cflag & CSIZE) == CS7) ? 0x20 : 0x00;
+
+    if (cflag & CBAUDEX)
+	baud += B38400;
+    if (baud < B1200 || baud > B38400+2)
+	baud = B9600; /* use default 9600bps for non-implemented rates */
+    baud -= B1200; /* baud_table[] starts at 1200bps */
+
+    mfp.trn_stat &= ~0x01; /* disable TX */
+    mfp.usart_ctr = parity | csize | 0x88; /* 1:16 clk mode, 1 stop bit */
+    mfp.tim_ct_cd &= 0x70;  /* stop timer D */
+    mfp.tim_dt_d = baud_table[baud];
+    mfp.tim_ct_cd |= 0x01;  /* start timer D, 1:4 */
+    mfp.trn_stat |= 0x01;  /* enable TX */
+
+    atari_MFP_init_done = 1;
+}
+
+#define SCC_WRITE(reg,val)				\
+    do {						\
+	scc.cha_b_ctrl = (reg);				\
+	MFPDELAY();					\
+	scc.cha_b_ctrl = (val);				\
+	MFPDELAY();					\
+    } while(0)
+
+/* loops_per_jiffy isn't initialized yet, so we can't use udelay(). This does a
+ * delay of ~ 60us. */
+#define LONG_DELAY()				\
+    do {					\
+	int i;					\
+	for( i = 100; i > 0; --i )		\
+	    MFPDELAY();				\
+    } while(0)
+
+#ifndef CONFIG_SERIAL_CONSOLE
+static void __init atari_init_scc_port( int cflag )
+#else
+void atari_init_scc_port( int cflag )
+#endif
+{
+    extern int atari_SCC_reset_done;
+    static int clksrc_table[9] =
+	/* reg 11: 0x50 = BRG, 0x00 = RTxC, 0x28 = TRxC */
+	{ 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x00, 0x00 };
+    static int brgsrc_table[9] =
+	/* reg 14: 0 = RTxC, 2 = PCLK */
+	{ 2, 2, 2, 2, 2, 2, 0, 2, 2 };
+    static int clkmode_table[9] =
+	/* reg 4: 0x40 = x16, 0x80 = x32, 0xc0 = x64 */
+	{ 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0xc0, 0x80 };
+    static int div_table[9] =
+	/* reg12 (BRG low) */
+	{ 208, 138, 103, 50, 24, 11, 1, 0, 0 };
+
+    int baud = cflag & CBAUD;
+    int clksrc, clkmode, div, reg3, reg5;
+
+    if (cflag & CBAUDEX)
+	baud += B38400;
+    if (baud < B1200 || baud > B38400+2)
+	baud = B9600; /* use default 9600bps for non-implemented rates */
+    baud -= B1200; /* tables starts at 1200bps */
+
+    clksrc  = clksrc_table[baud];
+    clkmode = clkmode_table[baud];
+    div     = div_table[baud];
+    if (ATARIHW_PRESENT(TT_MFP) && baud >= 6) {
+	/* special treatment for TT, where rates >= 38400 are done via TRxC */
+	clksrc = 0x28; /* TRxC */
+	clkmode = baud == 6 ? 0xc0 :
+		  baud == 7 ? 0x80 : /* really 76800bps */
+			      0x40;  /* really 153600bps */
+	div = 0;
+    }
+
+    reg3 = (cflag & CSIZE) == CS8 ? 0xc0 : 0x40;
+    reg5 = (cflag & CSIZE) == CS8 ? 0x60 : 0x20 | 0x82 /* assert DTR/RTS */;
+
+    (void)scc.cha_b_ctrl;	/* reset reg pointer */
+    SCC_WRITE( 9, 0xc0 );	/* reset */
+    LONG_DELAY();		/* extra delay after WR9 access */
+    SCC_WRITE( 4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03) : 0 |
+		  0x04 /* 1 stopbit */ |
+		  clkmode );
+    SCC_WRITE( 3, reg3 );
+    SCC_WRITE( 5, reg5 );
+    SCC_WRITE( 9, 0 );		/* no interrupts */
+    LONG_DELAY();		/* extra delay after WR9 access */
+    SCC_WRITE( 10, 0 );		/* NRZ mode */
+    SCC_WRITE( 11, clksrc );	/* main clock source */
+    SCC_WRITE( 12, div );	/* BRG value */
+    SCC_WRITE( 13, 0 );		/* BRG high byte */
+    SCC_WRITE( 14, brgsrc_table[baud] );
+    SCC_WRITE( 14, brgsrc_table[baud] | (div ? 1 : 0) );
+    SCC_WRITE( 3, reg3 | 1 );
+    SCC_WRITE( 5, reg5 | 8 );
+
+    atari_SCC_reset_done = 1;
+    atari_SCC_init_done = 1;
+}
+
+#ifndef CONFIG_SERIAL_CONSOLE
+static void __init atari_init_midi_port( int cflag )
+#else
+void atari_init_midi_port( int cflag )
+#endif
+{
+    int baud = cflag & CBAUD;
+    int csize = ((cflag & CSIZE) == CS8) ? 0x10 : 0x00;
+    /* warning 7N1 isn't possible! (instead 7O2 is used...) */
+    int parity = (cflag & PARENB) ? ((cflag & PARODD) ? 0x0c : 0x08) : 0x04;
+    int div;
+
+    /* 4800 selects 7812.5, 115200 selects 500000, all other (incl. 9600 as
+     * default) the standard MIDI speed 31250. */
+    if (cflag & CBAUDEX)
+	baud += B38400;
+    if (baud == B4800)
+	div = ACIA_DIV64; /* really 7812.5 bps */
+    else if (baud == B38400+2 /* 115200 */)
+	div = ACIA_DIV1; /* really 500 kbps (does that work??) */
+    else
+	div = ACIA_DIV16; /* 31250 bps, standard for MIDI */
+
+    /* RTS low, ints disabled */
+    acia.mid_ctrl = div | csize | parity |
+		    ((atari_switches & ATARI_SWITCH_MIDI) ?
+		     ACIA_RHTID : ACIA_RLTID);
+}
+
+void __init atari_debug_init(void)
+{
+    if (!strcmp( m68k_debug_device, "ser" )) {
+	/* defaults to ser2 for a Falcon and ser1 otherwise */
+	strcpy( m68k_debug_device, MACH_IS_FALCON ? "ser2" : "ser1" );
+
+    }
+
+    if (!strcmp( m68k_debug_device, "ser1" )) {
+	/* ST-MFP Modem1 serial port */
+	atari_init_mfp_port( B9600|CS8 );
+	atari_console_driver.write = atari_mfp_console_write;
+    }
+    else if (!strcmp( m68k_debug_device, "ser2" )) {
+	/* SCC Modem2 serial port */
+	atari_init_scc_port( B9600|CS8 );
+	atari_console_driver.write = atari_scc_console_write;
+    }
+    else if (!strcmp( m68k_debug_device, "midi" )) {
+	/* MIDI port */
+	atari_init_midi_port( B9600|CS8 );
+	atari_console_driver.write = atari_midi_console_write;
+    }
+    else if (!strcmp( m68k_debug_device, "par" )) {
+	/* parallel printer */
+	atari_turnoff_irq( IRQ_MFP_BUSY ); /* avoid ints */
+	sound_ym.rd_data_reg_sel = 7;  /* select mixer control */
+	sound_ym.wd_data = 0xff;       /* sound off, ports are output */
+	sound_ym.rd_data_reg_sel = 15; /* select port B */
+	sound_ym.wd_data = 0;          /* no char */
+	sound_ym.rd_data_reg_sel = 14; /* select port A */
+	sound_ym.wd_data = sound_ym.rd_data_reg_sel | 0x20; /* strobe H */
+	atari_console_driver.write = atari_par_console_write;
+    }
+    if (atari_console_driver.write)
+	register_console(&atari_console_driver);
+}
+
+/*
+ * Local variables:
+ *  c-indent-level: 4
+ *  tab-width: 8
+ * End:
+ */