m68knommu: clean up use of MBAR for DRAM registers on ColdFire start

In some of the RAM size autodetection code on ColdFire CPU startup
we reference DRAM registers relative to the MBAR register. Not all of
the supported ColdFire CPUs have an MBAR, and currently this works
because we fake an MBAR address on those registers. In an effort to
clean this up, and eventually remove the fake MBAR setting make the
DRAM register address definitions actually contain the MBAR (or IPSBAR
as appropriate) value as required.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

1 files changed, 5 insertions, 5 deletions

diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h
index c318ce786f93..33b0b4df07ca 100644
--- a/arch/m68k/include/asm/m5249sim.h
+++ b/arch/m68k/include/asm/m5249sim.h
@@ -60,11 +60,11 @@
 #define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
 #define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
 
-#define MCFSIM_DCR		0x100		/* DRAM Control reg (r/w) */
-#define MCFSIM_DACR0		0x108		/* DRAM 0 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR0		0x10c		/* DRAM 0 Mask reg (r/w) */
-#define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
+#define MCFSIM_DCR		(MCF_MBAR + 0x100)	/* DRAM Control */
+#define MCFSIM_DACR0		(MCF_MBAR + 0x108)	/* DRAM 0 Addr/Ctrl */
+#define MCFSIM_DMR0		(MCF_MBAR + 0x10c)	/* DRAM 0 Mask */
+#define MCFSIM_DACR1		(MCF_MBAR + 0x110)	/* DRAM 1 Addr/Ctrl */
+#define MCFSIM_DMR1		(MCF_MBAR + 0x114)	/* DRAM 1 Mask */
 
 /*
  *	Timer module.