Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:

 o Add basic support for the Mediatek/Ralink Wireless SoC family.

 o The Qualcomm Atheros platform is extended by support for the new
   QCA955X SoC series as well as a bunch of patches that get the code
   ready for OF support.

 o Lantiq and BCM47XX platform have a few improvements and bug fixes.

 o MIPS has sent a few patches that get the kernel ready for the
   upcoming microMIPS support.

 o The rest of the series is made up of small bug fixes and cleanups
   that relate to various parts of the MIPS code.  The biggy in there is
   a whitespace cleanup.  After I was sent another set of whitespace
   cleanup patches I decided it was the time to clean the whitespace
   "issues" for once and and that touches many files below arch/mips/.

Fix up silly conflicts, mostly due to whitespace cleanups.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (105 commits)
  MIPS: Quit exporting kernel internel break codes to uapi/asm/break.h
  MIPS: remove broken conditional inside vpe loader code
  MIPS: SMTC: fix implicit declaration of set_vi_handler
  MIPS: early_printk: drop __init annotations
  MIPS: Probe for and report hardware virtualization support.
  MIPS: ath79: add support for the Qualcomm Atheros AP136-010 board
  MIPS: ath79: add USB controller registration code for the QCA955X SoCs
  MIPS: ath79: add PCI controller registration code for the QCA955X SoCs
  MIPS: ath79: add WMAC registration code for the QCA955X SoCs
  MIPS: ath79: register UART for the QCA955X SoCs
  MIPS: ath79: add QCA955X specific glue to ath79_device_reset_{set, clear}
  MIPS: ath79: add GPIO setup code for the QCA955X SoCs
  MIPS: ath79: add IRQ handling code for the QCA955X SoCs
  MIPS: ath79: add clock setup code for the QCA955X SoCs
  MIPS: ath79: add SoC detection code for the QCA955X SoCs
  MIPS: ath79: add early printk support for the QCA955X SoCs
  MIPS: ath79: fix WMAC IRQ resource assignment
  mips: reserve elfcorehdr
  mips: Make sure kernel memory is in iomem
  MIPS: ath79: use dynamically allocated USB platform devices
  ...

1 files changed, 14 insertions, 14 deletions

diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c
index 299b7d202bea..a84d98b8f96e 100644
--- a/arch/mips/alchemy/devboards/db1200.c
+++ b/arch/mips/alchemy/devboards/db1200.c
@@ -90,14 +90,14 @@ int __init db1200_board_setup(void)
 
 	whoami = bcsr_read(BCSR_WHOAMI);
 	printk(KERN_INFO "Alchemy/AMD/RMI %s Board, CPLD Rev %d"
-		"  Board-ID %d  Daughtercard ID %d\n", get_system_type(),
+		"  Board-ID %d	Daughtercard ID %d\n", get_system_type(),
 		(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
 
 	/* SMBus/SPI on PSC0, Audio on PSC1 */
 	pfc = __raw_readl((void __iomem *)SYS_PINFUNC);
 	pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
 	pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3);
-	pfc |= SYS_PINFUNC_P1C;	/* SPI is configured later */
+	pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */
 	__raw_writel(pfc, (void __iomem *)SYS_PINFUNC);
 	wmb();
 
@@ -129,7 +129,7 @@ int __init db1200_board_setup(void)
 static struct mtd_partition db1200_spiflash_parts[] = {
 	{
 		.name	= "spi_flash",
-		.offset	= 0,
+		.offset = 0,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
@@ -200,12 +200,12 @@ static int au1200_nand_device_ready(struct mtd_info *mtd)
 static struct mtd_partition db1200_nand_parts[] = {
 	{
 		.name	= "NAND FS 0",
-		.offset	= 0,
+		.offset = 0,
 		.size	= 8 * 1024 * 1024,
 	},
 	{
 		.name	= "NAND FS 1",
-		.offset	= MTDPART_OFS_APPEND,
+		.offset = MTDPART_OFS_APPEND,
 		.size	= MTDPART_SIZ_FULL
 	},
 };
@@ -395,7 +395,7 @@ static void db1200_mmcled_set(struct led_classdev *led,
 }
 
 static struct led_classdev db1200_mmc_led = {
-	.brightness_set	= db1200_mmcled_set,
+	.brightness_set = db1200_mmcled_set,
 };
 
 /* -- */
@@ -463,7 +463,7 @@ static void pb1200_mmc1led_set(struct led_classdev *led,
 }
 
 static struct led_classdev pb1200_mmc1_led = {
-	.brightness_set	= pb1200_mmc1led_set,
+	.brightness_set = pb1200_mmc1led_set,
 };
 
 static void pb1200_mmc1_set_power(void *mmc_host, int state)
@@ -526,7 +526,7 @@ static struct resource au1200_mmc0_resources[] = {
 	}
 };
 
-static u64 au1xxx_mmc_dmamask =  DMA_BIT_MASK(32);
+static u64 au1xxx_mmc_dmamask =	 DMA_BIT_MASK(32);
 
 static struct platform_device db1200_mmc0_dev = {
 	.name		= "au1xxx-mmc",
@@ -601,7 +601,7 @@ static int db1200fb_panel_shutdown(void)
 static struct au1200fb_platdata db1200fb_pd = {
 	.panel_index	= db1200fb_panel_index,
 	.panel_init	= db1200fb_panel_init,
-	.panel_shutdown	= db1200fb_panel_shutdown,
+	.panel_shutdown = db1200fb_panel_shutdown,
 };
 
 static struct resource au1200_lcd_res[] = {
@@ -772,11 +772,11 @@ static int __init pb1200_res_fixup(void)
 	}
 
 	db1200_nand_res[0].start = PB1200_NAND_PHYS_ADDR;
-	db1200_nand_res[0].end   = PB1200_NAND_PHYS_ADDR + 0xff;
+	db1200_nand_res[0].end	 = PB1200_NAND_PHYS_ADDR + 0xff;
 	db1200_ide_res[0].start = PB1200_IDE_PHYS_ADDR;
-	db1200_ide_res[0].end   = PB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1;
+	db1200_ide_res[0].end	= PB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1;
 	db1200_eth_res[0].start = PB1200_ETH_PHYS_ADDR;
-	db1200_eth_res[0].end   = PB1200_ETH_PHYS_ADDR + 0xff;
+	db1200_eth_res[0].end	= PB1200_ETH_PHYS_ADDR + 0xff;
 	return 0;
 }
 
@@ -797,7 +797,7 @@ int __init db1200_dev_setup(void)
 	irq_set_irq_type(AU1200_GPIO7_INT, IRQ_TYPE_LEVEL_LOW);
 	bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
 
-	/* insert/eject pairs: one of both is always screaming.  To avoid
+	/* insert/eject pairs: one of both is always screaming.	 To avoid
 	 * issues they must not be automatically enabled when initially
 	 * requested.
 	 */
@@ -813,7 +813,7 @@ int __init db1200_dev_setup(void)
 	spi_register_board_info(db1200_spi_devs,
 				ARRAY_SIZE(db1200_i2c_devs));
 
-	/* SWITCHES:	S6.8 I2C/SPI selector  (OFF=I2C  ON=SPI)
+	/* SWITCHES:	S6.8 I2C/SPI selector  (OFF=I2C	 ON=SPI)
 	 *		S6.7 AC97/I2S selector (OFF=AC97 ON=I2S)
 	 *		or S12 on the PB1200.
 	 */