summaryrefslogtreecommitdiff
path: root/arch/mips/alchemy
diff options
context:
space:
mode:
authorManuel Lauss <manuel.lauss@googlemail.com>2011-05-08 10:42:17 +0200
committerRalf Baechle <ralf@linux-mips.org>2011-05-19 09:55:45 +0100
commit80130204b43ce9c3b50924e4c2d44e9f2881f8c3 (patch)
treeb136768ee20f226dbe0c55e1957f19e882784a5b /arch/mips/alchemy
parentadcb86279f1e4d7a1a9f267b49441aecf4a5110a (diff)
MIPS: Alchemy: Rewrite UART setup and constants.
Detect CPU type at runtime and setup uarts accordingly; also clean up the uart base address mess in the process as far as possible. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: Florian Fainelli <florian@openwrt.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Patchwork: https://patchwork.linux-mips.org/patch/2352/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org
Diffstat (limited to 'arch/mips/alchemy')
-rw-r--r--arch/mips/alchemy/common/platform.c93
-rw-r--r--arch/mips/alchemy/devboards/prom.c2
-rw-r--r--arch/mips/alchemy/gpr/board_setup.c14
-rw-r--r--arch/mips/alchemy/gpr/init.c2
-rw-r--r--arch/mips/alchemy/mtx-1/init.c2
-rw-r--r--arch/mips/alchemy/xxs1500/board_setup.c11
-rw-r--r--arch/mips/alchemy/xxs1500/init.c2
7 files changed, 63 insertions, 63 deletions
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index 9e7814db3d03..36489fb184a2 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -30,21 +30,12 @@ static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
#ifdef CONFIG_SERIAL_8250
switch (state) {
case 0:
- if ((__raw_readl(port->membase + UART_MOD_CNTRL) & 3) != 3) {
- /* power-on sequence as suggested in the databooks */
- __raw_writel(0, port->membase + UART_MOD_CNTRL);
- wmb();
- __raw_writel(1, port->membase + UART_MOD_CNTRL);
- wmb();
- }
- __raw_writel(3, port->membase + UART_MOD_CNTRL); /* full on */
- wmb();
+ alchemy_uart_enable(CPHYSADDR(port->membase));
serial8250_do_pm(port, state, old_state);
break;
case 3: /* power off */
serial8250_do_pm(port, state, old_state);
- __raw_writel(0, port->membase + UART_MOD_CNTRL);
- wmb();
+ alchemy_uart_disable(CPHYSADDR(port->membase));
break;
default:
serial8250_do_pm(port, state, old_state);
@@ -65,38 +56,60 @@ static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
.pm = alchemy_8250_pm, \
}
-static struct plat_serial8250_port au1x00_uart_data[] = {
-#if defined(CONFIG_SOC_AU1000)
- PORT(UART0_PHYS_ADDR, AU1000_UART0_INT),
- PORT(UART1_PHYS_ADDR, AU1000_UART1_INT),
- PORT(UART2_PHYS_ADDR, AU1000_UART2_INT),
- PORT(UART3_PHYS_ADDR, AU1000_UART3_INT),
-#elif defined(CONFIG_SOC_AU1500)
- PORT(UART0_PHYS_ADDR, AU1500_UART0_INT),
- PORT(UART3_PHYS_ADDR, AU1500_UART3_INT),
-#elif defined(CONFIG_SOC_AU1100)
- PORT(UART0_PHYS_ADDR, AU1100_UART0_INT),
- PORT(UART1_PHYS_ADDR, AU1100_UART1_INT),
- PORT(UART3_PHYS_ADDR, AU1100_UART3_INT),
-#elif defined(CONFIG_SOC_AU1550)
- PORT(UART0_PHYS_ADDR, AU1550_UART0_INT),
- PORT(UART1_PHYS_ADDR, AU1550_UART1_INT),
- PORT(UART3_PHYS_ADDR, AU1550_UART3_INT),
-#elif defined(CONFIG_SOC_AU1200)
- PORT(UART0_PHYS_ADDR, AU1200_UART0_INT),
- PORT(UART1_PHYS_ADDR, AU1200_UART1_INT),
-#endif
- { },
+static struct plat_serial8250_port au1x00_uart_data[][4] __initdata = {
+ [ALCHEMY_CPU_AU1000] = {
+ PORT(AU1000_UART0_PHYS_ADDR, AU1000_UART0_INT),
+ PORT(AU1000_UART1_PHYS_ADDR, AU1000_UART1_INT),
+ PORT(AU1000_UART2_PHYS_ADDR, AU1000_UART2_INT),
+ PORT(AU1000_UART3_PHYS_ADDR, AU1000_UART3_INT),
+ },
+ [ALCHEMY_CPU_AU1500] = {
+ PORT(AU1000_UART0_PHYS_ADDR, AU1500_UART0_INT),
+ PORT(AU1000_UART3_PHYS_ADDR, AU1500_UART3_INT),
+ },
+ [ALCHEMY_CPU_AU1100] = {
+ PORT(AU1000_UART0_PHYS_ADDR, AU1100_UART0_INT),
+ PORT(AU1000_UART1_PHYS_ADDR, AU1100_UART1_INT),
+ PORT(AU1000_UART3_PHYS_ADDR, AU1100_UART3_INT),
+ },
+ [ALCHEMY_CPU_AU1550] = {
+ PORT(AU1000_UART0_PHYS_ADDR, AU1550_UART0_INT),
+ PORT(AU1000_UART1_PHYS_ADDR, AU1550_UART1_INT),
+ PORT(AU1000_UART3_PHYS_ADDR, AU1550_UART3_INT),
+ },
+ [ALCHEMY_CPU_AU1200] = {
+ PORT(AU1000_UART0_PHYS_ADDR, AU1200_UART0_INT),
+ PORT(AU1000_UART1_PHYS_ADDR, AU1200_UART1_INT),
+ },
};
static struct platform_device au1xx0_uart_device = {
.name = "serial8250",
.id = PLAT8250_DEV_AU1X00,
- .dev = {
- .platform_data = au1x00_uart_data,
- },
};
+static void __init alchemy_setup_uarts(int ctype)
+{
+ unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
+ int s = sizeof(struct plat_serial8250_port);
+ int c = alchemy_get_uarts(ctype);
+ struct plat_serial8250_port *ports;
+
+ ports = kzalloc(s * (c + 1), GFP_KERNEL);
+ if (!ports) {
+ printk(KERN_INFO "Alchemy: no memory for UART data\n");
+ return;
+ }
+ memcpy(ports, au1x00_uart_data[ctype], s * c);
+ au1xx0_uart_device.dev.platform_data = ports;
+
+ /* Fill up uartclk. */
+ for (s = 0; s < c; s++)
+ ports[s].uartclk = uartclk;
+ if (platform_device_register(&au1xx0_uart_device))
+ printk(KERN_INFO "Alchemy: failed to register UARTs\n");
+}
+
/* OHCI (USB full speed host controller) */
static struct resource au1xxx_usb_ohci_resources[] = {
[0] = {
@@ -442,7 +455,6 @@ void __init au1xxx_override_eth_cfg(unsigned int port,
}
static struct platform_device *au1xxx_platform_devices[] __initdata = {
- &au1xx0_uart_device,
&au1xxx_usb_ohci_device,
#ifdef CONFIG_FB_AU1100
&au1100_lcd_device,
@@ -465,13 +477,10 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
static int __init au1xxx_platform_init(void)
{
- unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
- int err, i;
+ int err, i, ctype = alchemy_get_cputype();
unsigned char ethaddr[6];
- /* Fill up uartclk. */
- for (i = 0; au1x00_uart_data[i].flags; i++)
- au1x00_uart_data[i].uartclk = uartclk;
+ alchemy_setup_uarts(ctype);
/* use firmware-provided mac addr if available and necessary */
i = prom_get_ethernet_addr(ethaddr);
diff --git a/arch/mips/alchemy/devboards/prom.c b/arch/mips/alchemy/devboards/prom.c
index baeb21385058..e5306b56da6d 100644
--- a/arch/mips/alchemy/devboards/prom.c
+++ b/arch/mips/alchemy/devboards/prom.c
@@ -62,5 +62,5 @@ void __init prom_init(void)
void prom_putchar(unsigned char c)
{
- alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+ alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
}
diff --git a/arch/mips/alchemy/gpr/board_setup.c b/arch/mips/alchemy/gpr/board_setup.c
index ad2e3f137933..5f8f0691ed2d 100644
--- a/arch/mips/alchemy/gpr/board_setup.c
+++ b/arch/mips/alchemy/gpr/board_setup.c
@@ -36,9 +36,6 @@
#include <prom.h>
-#define UART1_ADDR KSEG1ADDR(UART1_PHYS_ADDR)
-#define UART3_ADDR KSEG1ADDR(UART3_PHYS_ADDR)
-
char irq_tab_alchemy[][5] __initdata = {
[0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff },
};
@@ -67,18 +64,15 @@ static void gpr_power_off(void)
void __init board_setup(void)
{
- printk(KERN_INFO "Tarpeze ITS GPR board\n");
+ printk(KERN_INFO "Trapeze ITS GPR board\n");
pm_power_off = gpr_power_off;
_machine_halt = gpr_power_off;
_machine_restart = gpr_reset;
- /* Enable UART3 */
- au_writel(0x1, UART3_ADDR + UART_MOD_CNTRL);/* clock enable (CE) */
- au_writel(0x3, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */
- /* Enable UART1 */
- au_writel(0x1, UART1_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */
- au_writel(0x3, UART1_ADDR + UART_MOD_CNTRL); /* CE and "enable" */
+ /* Enable UART1/3 */
+ alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
+ alchemy_uart_enable(AU1000_UART1_PHYS_ADDR);
/* Take away Reset of UMTS-card */
alchemy_gpio_direction_output(215, 1);
diff --git a/arch/mips/alchemy/gpr/init.c b/arch/mips/alchemy/gpr/init.c
index f044f4c541d7..229aafae680c 100644
--- a/arch/mips/alchemy/gpr/init.c
+++ b/arch/mips/alchemy/gpr/init.c
@@ -59,5 +59,5 @@ void __init prom_init(void)
void prom_putchar(unsigned char c)
{
- alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+ alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
}
diff --git a/arch/mips/alchemy/mtx-1/init.c b/arch/mips/alchemy/mtx-1/init.c
index f8d25575fa05..2e81cc7f3422 100644
--- a/arch/mips/alchemy/mtx-1/init.c
+++ b/arch/mips/alchemy/mtx-1/init.c
@@ -62,5 +62,5 @@ void __init prom_init(void)
void prom_putchar(unsigned char c)
{
- alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+ alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
}
diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c
index febfb0fb0896..81e57fad07ab 100644
--- a/arch/mips/alchemy/xxs1500/board_setup.c
+++ b/arch/mips/alchemy/xxs1500/board_setup.c
@@ -66,13 +66,10 @@ void __init board_setup(void)
au_writel(pin_func, SYS_PINFUNC);
/* Enable UART */
- au_writel(0x01, UART3_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */
- mdelay(10);
- au_writel(0x03, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */
- mdelay(10);
-
- /* Enable DTR = USB power up */
- au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */
+ alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
+ /* Enable DTR (MCR bit 0) = USB power up */
+ __raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18));
+ wmb();
#ifdef CONFIG_PCI
#if defined(__MIPSEB__)
diff --git a/arch/mips/alchemy/xxs1500/init.c b/arch/mips/alchemy/xxs1500/init.c
index 34a90a4bb6f4..0ee02cfa989d 100644
--- a/arch/mips/alchemy/xxs1500/init.c
+++ b/arch/mips/alchemy/xxs1500/init.c
@@ -59,5 +59,5 @@ void __init prom_init(void)
void prom_putchar(unsigned char c)
{
- alchemy_uart_putchar(UART0_PHYS_ADDR, c);
+ alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
}