diff options
| author | Ralf Baechle <ralf@linux-mips.org> | 2013-01-22 12:59:30 +0100 |
|---|---|---|
| committer | Ralf Baechle <ralf@linux-mips.org> | 2013-02-01 10:00:22 +0100 |
| commit | 7034228792cc561e79ff8600f02884bd4c80e287 (patch) | |
| tree | 89b77af37d087d9de236fc5d21f60bf552d0a2c6 /arch/mips/cavium-octeon | |
| parent | 405ab01c70e18058d9c01a1256769a61fc65413e (diff) | |
MIPS: Whitespace cleanup.
Having received another series of whitespace patches I decided to do this
once and for all rather than dealing with this kind of patches trickling
in forever.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips/cavium-octeon')
23 files changed, 220 insertions, 220 deletions
diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile index 6e927cf20df2..3751c3918571 100644 --- a/arch/mips/cavium-octeon/Makefile +++ b/arch/mips/cavium-octeon/Makefile @@ -17,7 +17,7 @@ obj-y += dma-octeon.o flash_setup.o obj-y += octeon-memcpy.o obj-y += executive/ -obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_SMP) += smp.o DTS_FILES = octeon_3xxx.dts octeon_68xx.dts DTB_FILES = $(patsubst %.dts, %.dtb, $(DTS_FILES)) diff --git a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c index 6d5ddbc112cc..504ed61a47cd 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c +++ b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c @@ -155,8 +155,8 @@ int cvmx_bootmem_init(void *mem_desc_ptr) * * Linux 64 bit: Set XKPHYS bit * Linux 32 bit: use mmap to create mapping, use virtual address - * CVMX 64 bit: use physical address directly - * CVMX 32 bit: use physical address directly + * CVMX 64 bit: use physical address directly + * CVMX 32 bit: use physical address directly * * Note that the CVMX environment assumes the use of 1-1 TLB * mappings so that the physical addresses can be used @@ -398,7 +398,7 @@ error_out: int __cvmx_bootmem_phy_free(uint64_t phy_addr, uint64_t size, uint32_t flags) { uint64_t cur_addr; - uint64_t prev_addr = 0; /* zero is invalid */ + uint64_t prev_addr = 0; /* zero is invalid */ int retval = 0; #ifdef DEBUG @@ -424,7 +424,7 @@ int __cvmx_bootmem_phy_free(uint64_t phy_addr, uint64_t size, uint32_t flags) if (cur_addr == 0 || phy_addr < cur_addr) { /* add at front of list - special case with changing head ptr */ if (cur_addr && phy_addr + size > cur_addr) - goto bootmem_free_done; /* error, overlapping section */ + goto bootmem_free_done; /* error, overlapping section */ else if (phy_addr + size == cur_addr) { /* Add to front of existing first block */ cvmx_bootmem_phy_set_next(phy_addr, @@ -611,7 +611,7 @@ int cvmx_bootmem_phy_named_block_free(char *name, uint32_t flags) } cvmx_bootmem_unlock(); - return named_block_ptr != NULL; /* 0 on failure, 1 on success */ + return named_block_ptr != NULL; /* 0 on failure, 1 on success */ } int64_t cvmx_bootmem_phy_named_block_alloc(uint64_t size, uint64_t min_addr, diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c index fd2015331a20..7c6497781895 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c @@ -203,10 +203,10 @@ int cvmx_helper_board_get_mii_address(int ipd_port) * enumeration from the bootloader. * * @ipd_port: IPD input port associated with the port we want to get link - * status for. + * status for. * * Returns The ports link status. If the link isn't fully resolved, this must - * return zero. + * return zero. */ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port) { @@ -357,16 +357,16 @@ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port) result.s.link_up = 1; result.s.full_duplex = ((phy_status >> 13) & 1); switch ((phy_status >> 14) & 3) { - case 0: /* 10 Mbps */ + case 0: /* 10 Mbps */ result.s.speed = 10; break; - case 1: /* 100 Mbps */ + case 1: /* 100 Mbps */ result.s.speed = 100; break; - case 2: /* 1 Gbps */ + case 2: /* 1 Gbps */ result.s.speed = 1000; break; - case 3: /* Illegal */ + case 3: /* Illegal */ result.u64 = 0; break; } @@ -391,16 +391,16 @@ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port) result.s.link_up = inband_status.s.status; result.s.full_duplex = inband_status.s.duplex; switch (inband_status.s.speed) { - case 0: /* 10 Mbps */ + case 0: /* 10 Mbps */ result.s.speed = 10; break; - case 1: /* 100 Mbps */ + case 1: /* 100 Mbps */ result.s.speed = 100; break; - case 2: /* 1 Gbps */ + case 2: /* 1 Gbps */ result.s.speed = 1000; break; - case 3: /* Illegal */ + case 3: /* Illegal */ result.u64 = 0; break; } @@ -429,9 +429,9 @@ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port) * * @phy_addr: The address of the PHY to program * @enable_autoneg: - * Non zero if you want to enable auto-negotiation. + * Non zero if you want to enable auto-negotiation. * @link_info: Link speed to program. If the speed is zero and auto-negotiation - * is enabled, all possible negotiation speeds are advertised. + * is enabled, all possible negotiation speeds are advertised. * * Returns Zero on success, negative on failure */ @@ -607,10 +607,10 @@ int cvmx_helper_board_link_set_phy(int phy_addr, * * @interface: Interface to probe * @supported_ports: - * Number of ports Octeon supports. + * Number of ports Octeon supports. * * Returns Number of ports the actual board supports. Many times this will - * simple be "support_ports". + * simple be "support_ports". */ int __cvmx_helper_board_interface_probe(int interface, int supported_ports) { diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c b/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c index c1c54890bae0..607b4e659579 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-jtag.c @@ -79,10 +79,10 @@ void cvmx_helper_qlm_jtag_init(void) * @qlm: QLM to shift value into * @bits: Number of bits to shift in (1-32). * @data: Data to shift in. Bit 0 enters the chain first, followed by - * bit 1, etc. + * bit 1, etc. * * Returns The low order bits of the JTAG chain that shifted out of the - * circle. + * circle. */ uint32_t cvmx_helper_qlm_jtag_shift(int qlm, int bits, uint32_t data) { diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c index 82b21843421c..f59c88ee9b31 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c @@ -131,7 +131,7 @@ void cvmx_helper_rgmii_internal_loopback(int port) * @interface: Interface to setup * @port: Port to setup (0..3) * @cpu_clock_hz: - * Chip frequency in Hertz + * Chip frequency in Hertz * * Returns Zero on success, negative on failure */ @@ -409,14 +409,14 @@ int __cvmx_helper_rgmii_link_set(int ipd_port, mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface)); /* - * Port .en .type .p0mii Configuration - * ---- --- ----- ------ ----------------------------------------- - * X 0 X X All links are disabled. - * 0 1 X 0 Port 0 is RGMII - * 0 1 X 1 Port 0 is MII - * 1 1 0 X Ports 1 and 2 are configured as RGMII ports. - * 1 1 1 X Port 1: GMII/MII; Port 2: disabled. GMII or - * MII port is selected by GMX_PRT1_CFG[SPEED]. + * Port .en .type .p0mii Configuration + * ---- --- ----- ------ ----------------------------------------- + * X 0 X X All links are disabled. + * 0 1 X 0 Port 0 is RGMII + * 0 1 X 1 Port 0 is MII + * 1 1 0 X Ports 1 and 2 are configured as RGMII ports. + * 1 1 1 X Port 1: GMII/MII; Port 2: disabled. GMII or + * MII port is selected by GMX_PRT1_CFG[SPEED]. */ /* In MII mode, CLK_CNT = 1. */ @@ -464,9 +464,9 @@ int __cvmx_helper_rgmii_link_set(int ipd_port, * * @ipd_port: IPD/PKO port to loopback. * @enable_internal: - * Non zero if you want internal loopback + * Non zero if you want internal loopback * @enable_external: - * Non zero if you want external loopback + * Non zero if you want external loopback * * Returns Zero on success, negative on failure. */ diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c index 0c0bf5d30e70..45f18cce31a9 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-sgmii.c @@ -523,9 +523,9 @@ int __cvmx_helper_sgmii_link_set(int ipd_port, * * @ipd_port: IPD/PKO port to loopback. * @enable_internal: - * Non zero if you want internal loopback + * Non zero if you want internal loopback * @enable_external: - * Non zero if you want external loopback + * Non zero if you want external loopback * * Returns Zero on success, negative on failure. */ diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c index 2830e4bdf7f3..1f3030c72d88 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-spi.c @@ -160,16 +160,16 @@ cvmx_helper_link_info_t __cvmx_helper_spi_link_get(int ipd_port) result.s.link_up = inband.s.status; result.s.full_duplex = inband.s.duplex; switch (inband.s.speed) { - case 0: /* 10 Mbps */ + case 0: /* 10 Mbps */ result.s.speed = 10; break; - case 1: /* 100 Mbps */ + case 1: /* 100 Mbps */ result.s.speed = 100; break; - case 2: /* 1 Gbps */ + case 2: /* 1 Gbps */ result.s.speed = 1000; break; - case 3: /* Illegal */ + case 3: /* Illegal */ result.s.speed = 0; result.s.link_up = 0; break; diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-util.c b/arch/mips/cavium-octeon/executive/cvmx-helper-util.c index 116dea17acf5..b72d9fbf97a3 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-util.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-util.c @@ -96,9 +96,9 @@ int cvmx_helper_dump_packet(cvmx_wqe_t *work) uint8_t *end_of_data; cvmx_dprintf("Packet Length: %u\n", work->len); - cvmx_dprintf(" Input Port: %u\n", work->ipprt); - cvmx_dprintf(" QoS: %u\n", work->qos); - cvmx_dprintf(" Buffers: %u\n", work->word2.s.bufs); + cvmx_dprintf(" Input Port: %u\n", work->ipprt); + cvmx_dprintf(" QoS: %u\n", work->qos); + cvmx_dprintf(" Buffers: %u\n", work->word2.s.bufs); if (work->word2.s.bufs == 0) { union cvmx_ipd_wqe_fpa_queue wqe_pool; @@ -132,14 +132,14 @@ int cvmx_helper_dump_packet(cvmx_wqe_t *work) while (remaining_bytes) { start_of_buffer = ((buffer_ptr.s.addr >> 7) - buffer_ptr.s.back) << 7; - cvmx_dprintf(" Buffer Start:%llx\n", + cvmx_dprintf(" Buffer Start:%llx\n", (unsigned long long)start_of_buffer); - cvmx_dprintf(" Buffer I : %u\n", buffer_ptr.s.i); - cvmx_dprintf(" Buffer Back: %u\n", buffer_ptr.s.back); - cvmx_dprintf(" Buffer Pool: %u\n", buffer_ptr.s.pool); - cvmx_dprintf(" Buffer Data: %llx\n", + cvmx_dprintf(" Buffer I : %u\n", buffer_ptr.s.i); + cvmx_dprintf(" Buffer Back: %u\n", buffer_ptr.s.back); + cvmx_dprintf(" Buffer Pool: %u\n", buffer_ptr.s.pool); + cvmx_dprintf(" Buffer Data: %llx\n", (unsigned long long)buffer_ptr.s.addr); - cvmx_dprintf(" Buffer Size: %u\n", buffer_ptr.s.size); + cvmx_dprintf(" Buffer Size: %u\n", buffer_ptr.s.size); cvmx_dprintf("\t\t"); data_address = (uint8_t *) cvmx_phys_to_ptr(buffer_ptr.s.addr); @@ -172,11 +172,11 @@ int cvmx_helper_dump_packet(cvmx_wqe_t *work) * * @queue: Input queue to setup RED on (0-7) * @pass_thresh: - * Packets will begin slowly dropping when there are less than - * this many packet buffers free in FPA 0. + * Packets will begin slowly dropping when there are less than + * this many packet buffers free in FPA 0. * @drop_thresh: - * All incomming packets will be dropped when there are less - * than this many free packet buffers in FPA 0. + * All incomming packets will be dropped when there are less + * than this many free packet buffers in FPA 0. * Returns Zero on success. Negative on failure */ int cvmx_helper_setup_red_queue(int queue, int pass_thresh, int drop_thresh) @@ -207,11 +207,11 @@ int cvmx_helper_setup_red_queue(int queue, int pass_thresh, int drop_thresh) * Setup Random Early Drop to automatically begin dropping packets. * * @pass_thresh: - * Packets will begin slowly dropping when there are less than - * this many packet buffers free in FPA 0. + * Packets will begin slowly dropping when there are less than + * this many packet buffers free in FPA 0. * @drop_thresh: - * All incomming packets will be dropped when there are less - * than this many free packet buffers in FPA 0. + * All incomming packets will be dropped when there are less + * than this many free packet buffers in FPA 0. * Returns Zero on success. Negative on failure */ int cvmx_helper_setup_red(int pass_thresh, int drop_thresh) diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c index 1723248e987d..7653b7e92197 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c @@ -321,9 +321,9 @@ int __cvmx_helper_xaui_link_set(int ipd_port, cvmx_helper_link_info_t link_info) * * @ipd_port: IPD/PKO port to loopback. * @enable_internal: - * Non zero if you want internal loopback + * Non zero if you want internal loopback * @enable_external: - * Non zero if you want external loopback + * Non zero if you want external loopback * * Returns Zero on success, negative on failure. */ diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper.c b/arch/mips/cavium-octeon/executive/cvmx-helper.c index fa4963856353..d63d20dfbfb0 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c @@ -111,7 +111,7 @@ int cvmx_helper_ports_on_interface(int interface) * @interface: Interface to probe * * Returns Mode of the interface. Unknown or unsupported interfaces return - * DISABLED. + * DISABLED. */ cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int interface) { @@ -187,7 +187,7 @@ cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int interface) * the defines in executive-config.h. * * @ipd_port: Port to configure. This follows the IPD numbering, not the - * per interface numbering + * per interface numbering * * Returns Zero on success, negative on failure */ @@ -591,7 +591,7 @@ static int __cvmx_helper_packet_hardware_enable(int interface) * Function to adjust internal IPD pointer alignments * * Returns 0 on success - * !0 on failure + * !0 on failure */ int __cvmx_helper_errata_fix_ipd_ptr_alignment(void) { @@ -1068,9 +1068,9 @@ int cvmx_helper_link_set(int ipd_port, cvmx_helper_link_info_t link_info) * * @ipd_port: IPD/PKO port to loopback. * @enable_internal: - * Non zero if you want internal loopback + * Non zero if you want internal loopback * @enable_external: - * Non zero if you want external loopback + * Non zero if you want external loopback * * Returns Zero on success, negative on failure. */ diff --git a/arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c b/arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c index 560e034aa024..fa327ec891cd 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c +++ b/arch/mips/cavium-octeon/executive/cvmx-interrupt-rsl.c @@ -85,11 +85,11 @@ void __cvmx_interrupt_gmxx_enable(int interface) if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) { if (mode.s.en) { switch (mode.cn56xx.mode) { - case 1: /* XAUI */ + case 1: /* XAUI */ num_ports = 1; break; - case 2: /* SGMII */ - case 3: /* PICMG */ + case 2: /* SGMII */ + case 3: /* PICMG */ num_ports = 4; break; default: /* Disabled */ diff --git a/arch/mips/cavium-octeon/executive/cvmx-l2c.c b/arch/mips/cavium-octeon/executive/cvmx-l2c.c index 33b72144db31..42e38c30b540 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-l2c.c +++ b/arch/mips/cavium-octeon/executive/cvmx-l2c.c @@ -147,7 +147,7 @@ int cvmx_l2c_set_hw_way_partition(uint32_t mask) mask &= valid_mask; /* A UMSK setting which blocks all L2C Ways is an error on some chips */ - if (mask == valid_mask && !OCTEON_IS_MODEL(OCTEON_CN63XX)) + if (mask == valid_mask && !OCTEON_IS_MODEL(OCTEON_CN63XX)) return -1; if (OCTEON_IS_MODEL(OCTEON_CN63XX)) @@ -438,7 +438,7 @@ void cvmx_l2c_flush(void) for (set = 0; set < n_set; set++) { for (assoc = 0; assoc < n_assoc; assoc++) { address = CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, - (assoc << assoc_shift) | (set << set_shift)); + (assoc << assoc_shift) | (set << set_shift)); CVMX_CACHE_WBIL2I(address, 0); } } @@ -573,8 +573,8 @@ union __cvmx_l2c_tag { * @index: Index of the cacheline * * Returns The Octeon model specific tag structure. This is - * translated by a wrapper function to a generic form that is - * easier for applications to use. + * translated by a wrapper function to a generic form that is + * easier for applications to use. */ static union __cvmx_l2c_tag __read_l2_tag(uint64_t assoc, uint64_t index) { @@ -618,12 +618,12 @@ static union __cvmx_l2c_tag __read_l2_tag(uint64_t assoc, uint64_t index) ".set push\n\t" ".set mips64\n\t" ".set noreorder\n\t" - "sd %[dbg_val], 0(%[dbg_addr])\n\t" /* Enter debug mode, wait for store */ + "sd %[dbg_val], 0(%[dbg_addr])\n\t" /* Enter debug mode, wait for store */ "ld $0, 0(%[dbg_addr])\n\t" - "ld %[tag_val], 0(%[tag_addr])\n\t" /* Read L2C tag data */ - "sd $0, 0(%[dbg_addr])\n\t" /* Exit debug mode, wait for store */ + "ld %[tag_val], 0(%[tag_addr])\n\t" /* Read L2C tag data */ + "sd $0, 0(%[dbg_addr])\n\t" /* Exit debug mode, wait for store */ "ld $0, 0(%[dbg_addr])\n\t" - "cache 9, 0($0)\n\t" /* Invalidate dcache to discard debug data */ + "cache 9, 0($0)\n\t" /* Invalidate dcache to discard debug data */ ".set pop" : [tag_val] "=r" (tag_val) : [dbg_addr] "r" (dbg_addr), [dbg_val] "r" (debug_val), [tag_addr] "r" (debug_tag_addr) @@ -664,10 +664,10 @@ union cvmx_l2c_tag cvmx_l2c_get_tag(uint32_t association, uint32_t index) CVMX_SYNC; /* make sure CVMX_L2C_TADX_TAG is updated */ l2c_tadx_tag.u64 = cvmx_read_csr(CVMX_L2C_TADX_TAG(0)); - tag.s.V = l2c_tadx_tag.s.valid; - tag.s.D = l2c_tadx_tag.s.dirty; - tag.s.L = l2c_tadx_tag.s.lock; - tag.s.U = l2c_tadx_tag.s.use; + tag.s.V = l2c_tadx_tag.s.valid; + tag.s.D = l2c_tadx_tag.s.dirty; + tag.s.L = l2c_tadx_tag.s.lock; + tag.s.U = l2c_tadx_tag.s.use; tag.s.addr = l2c_tadx_tag.s.tag; } else { union __cvmx_l2c_tag tmp_tag; @@ -679,34 +679,34 @@ union cvmx_l2c_tag cvmx_l2c_get_tag(uint32_t association, uint32_t index) * as it can represent all models. */ if (OCTEON_IS_MODEL(OCTEON_CN58XX) || OCTEON_IS_MODEL(OCTEON_CN56XX)) { - tag.s.V = tmp_tag.cn58xx.V; - tag.s.D = tmp_tag.cn58xx.D; - tag.s.L = tmp_tag.cn58xx.L; - tag.s.U = tmp_tag.cn58xx.U; + tag.s.V = tmp_tag.cn58xx.V; + tag.s.D = tmp_tag.cn58xx.D; + tag.s.L = tmp_tag.cn58xx.L; + tag.s.U = tmp_tag.cn58xx.U; tag.s.addr = tmp_tag.cn58xx.addr; } else if (OCTEON_IS_MODEL(OCTEON_CN38XX)) { - tag.s.V = tmp_tag.cn38xx.V; - tag.s.D = tmp_tag.cn38xx.D; - tag.s.L = tmp_tag.cn38xx.L; - tag.s.U = tmp_tag.cn38xx.U; + tag.s.V = tmp_tag.cn38xx.V; + tag.s.D = tmp_tag.cn38xx.D; + tag.s.L = tmp_tag.cn38xx.L; + tag.s.U = tmp_tag.cn38xx.U; tag.s.addr = tmp_tag.cn38xx.addr; } else if (OCTEON_IS_MODEL(OCTEON_CN31XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) { - tag.s.V = tmp_tag.cn31xx.V; - tag.s.D = tmp_tag.cn31xx.D; - tag.s.L = tmp_tag.cn31xx.L; - tag.s.U = tmp_tag.cn31xx.U; + tag.s.V = tmp_tag.cn31xx.V; + tag.s.D = tmp_tag.cn31xx.D; + tag.s.L = tmp_tag.cn31xx.L; + tag.s.U = tmp_tag.cn31xx.U; tag.s.addr = tmp_tag.cn31xx.addr; } else if (OCTEON_IS_MODEL(OCTEON_CN30XX)) { - tag.s.V = tmp_tag.cn30xx.V; - tag.s.D = tmp_tag.cn30xx.D; - tag.s.L = tmp_tag.cn30xx.L; - tag.s.U = tmp_tag.cn30xx.U; + tag.s.V = tmp_tag.cn30xx.V; + tag.s.D = tmp_tag.cn30xx.D; + tag.s.L = tmp_tag.cn30xx.L; + tag.s.U = tmp_tag.cn30xx.U; tag.s.addr = tmp_tag.cn30xx.addr; } else if (OCTEON_IS_MODEL(OCTEON_CN50XX)) { - tag.s.V = tmp_tag.cn50xx.V; - tag.s.D = tmp_tag.cn50xx.D; - tag.s.L = tmp_tag.cn50xx.L; - tag.s.U = tmp_tag.cn50xx.U; + tag.s.V = tmp_tag.cn50xx.V; + tag.s.D = tmp_tag.cn50xx.D; + tag.s.L = tmp_tag.cn50xx.L; + tag.s.U = tmp_tag.cn50xx.U; tag.s.addr = tmp_tag.cn50xx.addr; } else { cvmx_dprintf("Unsupported OCTEON Model in %s\n", __func__); @@ -865,7 +865,7 @@ void cvmx_l2c_flush_line(uint32_t assoc, uint32_t index) uint64_t address; /* Create the address based on index and association. * Bits<20:17> select the way of the cache block involved in - * the operation + * the operation * Bits<16:7> of the effect address select the index */ address = CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS, diff --git a/arch/mips/cavium-octeon/executive/cvmx-pko.c b/arch/mips/cavium-octeon/executive/cvmx-pko.c index f557084b1092..f2c877541597 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-pko.c +++ b/arch/mips/cavium-octeon/executive/cvmx-pko.c @@ -99,7 +99,7 @@ void cvmx_pko_initialize_global(void) * be called after the FPA has been initialized and filled with pages. * * Returns 0 on success - * !0 on failure + * !0 on failure */ int cvmx_pko_initialize_local(void) { @@ -186,19 +186,19 @@ void cvmx_pko_shutdown(void) /** * Configure a output port and the associated queues for use. * - * @port: Port to configure. + * @port: Port to configure. * @base_queue: First queue number to associate with this port. * @num_queues: Number of queues to associate with this port - * @priority: Array of priority levels for each queue. Values are - * allowed to be 0-8. A value of 8 get 8 times the traffic - * of a value of 1. A value of 0 indicates that no rounds - * will be participated in. These priorities can be changed - * on the fly while the pko is enabled. A priority of 9 - * indicates that static priority should be used. If static - * priority is used all queues with static priority must be - * contiguous starting at the base_queue, and lower numbered - * queues have higher priority than higher numbered queues. - * There must be num_queues elements in the array. + * @priority: Array of priority levels for each queue. Values are + * allowed to be 0-8. A value of 8 get 8 times the traffic + * of a value of 1. A value of 0 indicates that no rounds + * will be participated in. These priorities can be changed + * on the fly while the pko is enabled. A priority of 9 + * indicates that static priority should be used. If static + * priority is used all queues with static priority must be + * contiguous starting at the base_queue, and lower numbered + * queues have higher priority than higher numbered queues. + * There must be num_queues elements in the array. */ cvmx_pko_status_t cvmx_pko_config_port(uint64_t port, uint64_t base_queue, uint64_t num_queues, @@ -440,7 +440,7 @@ void cvmx_pko_show_queue_map() * @port: Port to rate limit * @packets_s: Maximum packet/sec * @burst: Maximum number of packets to burst in a row before rate - * limiting cuts in. + * limiting cuts in. * * Returns Zero on success, negative on failure */ @@ -473,7 +473,7 @@ int cvmx_pko_rate_limit_packets(int port, int packets_s, int burst) * @port: Port to rate limit * @bits_s: PKO rate limit in bits/sec * @burst: Maximum number of bits to burst before rate - * limiting cuts in. + * limiting cuts in. * * Returns Zero on success, negative on failure */ diff --git a/arch/mips/cavium-octeon/executive/cvmx-spi.c b/arch/mips/cavium-octeon/executive/cvmx-spi.c index 74afb1710cd9..ef5198d13a0e 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-spi.c +++ b/arch/mips/cavium-octeon/executive/cvmx-spi.c @@ -69,7 +69,7 @@ static cvmx_spi_callbacks_t cvmx_spi_callbacks = { /** * Get current SPI4 initialization callbacks * - * @callbacks: Pointer to the callbacks structure.to fill + * @callbacks: Pointer to the callbacks structure.to fill * * Returns Pointer to cvmx_spi_callbacks_t structure. */ @@ -92,11 +92,11 @@ void cvmx_spi_set_callbacks(cvmx_spi_callbacks_t *new_callbacks) * Initialize and start the SPI interface. * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * @timeout: Timeout to wait for clock synchronization in seconds * @num_ports: Number of SPI ports to configure * @@ -138,11 +138,11 @@ int cvmx_spi_start_interface(int interface, cvmx_spi_mode_t mode, int timeout, * with its correspondent system. * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * @timeout: Timeout to wait for clock synchronization in seconds * * Returns Zero on success, negative of failure. @@ -160,7 +160,7 @@ int cvmx_spi_restart_interface(int interface, cvmx_spi_mode_t mode, int timeout) INVOKE_CB(cvmx_spi_callbacks.reset_cb, interface, mode); /* NOTE: Calendar setup is not performed during restart */ - /* Refer to cvmx_spi_start_interface() for the full sequence */ + /* Refer to cvmx_spi_start_interface() for the full sequence */ /* Callback to perform clock detection */ INVOKE_CB(cvmx_spi_callbacks.clock_detect_cb, interface, mode, timeout); @@ -182,11 +182,11 @@ int cvmx_spi_restart_interface(int interface, cvmx_spi_mode_t mode, int timeout) * Callback to perform SPI4 reset * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * * Returns Zero on success, non-zero error code on failure (will cause * SPI initialization to abort) @@ -297,11 +297,11 @@ int cvmx_spi_reset_cb(int interface, cvmx_spi_mode_t mode) * Callback to setup calendar and miscellaneous settings before clock detection * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * @num_ports: Number of ports to configure on SPI * * Returns Zero on success, non-zero error code on failure (will cause @@ -382,7 +382,7 @@ int cvmx_spi_calendar_setup_cb(int interface, cvmx_spi_mode_t mode, stxx_spi4_dat.u64 = 0; /*Minimum needed by dynamic alignment */ stxx_spi4_dat.s.alpha = 32; - stxx_spi4_dat.s.max_t = 0xFFFF; /*Minimum interval is 0x20 */ + stxx_spi4_dat.s.max_t = 0xFFFF; /*Minimum interval is 0x20 */ cvmx_write_csr(CVMX_STXX_SPI4_DAT(interface), stxx_spi4_dat.u64); @@ -416,11 +416,11 @@ int cvmx_spi_calendar_setup_cb(int interface, cvmx_spi_mode_t mode, * Callback to perform clock detection * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * @timeout: Timeout to wait for clock synchronization in seconds * * Returns Zero on success, non-zero error code on failure (will cause @@ -494,11 +494,11 @@ int cvmx_spi_clock_detect_cb(int interface, cvmx_spi_mode_t mode, int timeout) * Callback to perform link training * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * @timeout: Timeout to wait for link to be trained (in seconds) * * Returns Zero on success, non-zero error code on failure (will cause @@ -563,11 +563,11 @@ int cvmx_spi_training_cb(int interface, cvmx_spi_mode_t mode, int timeout) * Callback to perform calendar data synchronization * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * @timeout: Timeout to wait for calendar data in seconds * * Returns Zero on success, non-zero error code on failure (will cause @@ -620,11 +620,11 @@ int cvmx_spi_calendar_sync_cb(int interface, cvmx_spi_mode_t mode, int timeout) * Callback to handle interface up * * @interface: The identifier of the packet interface to configure and - * use as a SPI interface. + * use as a SPI interface. * @mode: The operating mode for the SPI interface. The interface - * can operate as a full duplex (both Tx and Rx data paths - * active) or as a halfplex (either the Tx data path is - * active or the Rx data path is active, but not both). + * can operate as a full duplex (both Tx and Rx data paths + * active) or as a halfplex (either the Tx data path is + * active or the Rx data path is active, but not both). * * Returns Zero on success, non-zero error code on failure (will cause * SPI initialization to abort) diff --git a/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c b/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c index 8b18a20cc7b3..3d17fac29359 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c +++ b/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c @@ -74,26 +74,26 @@ EXPORT_SYMBOL(cvmx_sysinfo_get); /** * This function is used in non-simple executive environments (such as - * Linux kernel, u-boot, etc.) to configure the minimal fields that + * Linux kernel, u-boot, etc.) to configure the minimal fields that * are required to use simple executive files directly. * * Locking (if required) must be handled outside of this * function * * @phy_mem_desc_ptr: - * Pointer to global physical memory descriptor - * (bootmem descriptor) @board_type: Octeon board - * type enumeration + * Pointer to global physical memory descriptor + * (bootmem descriptor) @board_type: Octeon board + * type enumeration * * @board_rev_major: - * Board major revision + * Board major revision * @board_rev_minor: - * Board minor revision + * Board minor revision * @cpu_clock_hz: - * CPU clock freqency in hertz + * CPU clock freqency in hertz * * Returns 0: Failure - * 1: success + * 1: success */ int cvmx_sysinfo_minimal_initialize(void *phy_mem_desc_ptr, uint16_t board_type, diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index 46f5dbceeecc..156aa6143e11 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -1542,7 +1542,7 @@ static bool octeon_irq_ciu2_is_edge(unsigned int line, unsigned int bit) if (line == 3) /* MIO */ switch (bit) { - case 2: /* IPD_DRP */ + case 2: /* IPD_DRP */ case 8 ... 11: /* Timers */ case 48: /* PTP */ edge = true; @@ -1553,7 +1553,7 @@ static bool octeon_irq_ciu2_is_edge(unsigned int line, unsigned int bit) else if (line == 6) /* PKT */ switch (bit) { case 52 ... 53: /* ILK_DRP */ - case 8 ... 12: /* GMX_DRP */ + case 8 ... 12: /* GMX_DRP */ edge = true; break; default: diff --git a/arch/mips/cavium-octeon/octeon-memcpy.S b/arch/mips/cavium-octeon/octeon-memcpy.S index 0ba0eb96d9ac..64e08df51d65 100644 --- a/arch/mips/cavium-octeon/octeon-memcpy.S +++ b/arch/mips/cavium-octeon/octeon-memcpy.S @@ -116,15 +116,15 @@ #ifdef CONFIG_CPU_LITTLE_ENDIAN #define LDFIRST LOADR -#define LDREST LOADL +#define LDREST LOADL #define STFIRST STORER -#define STREST STOREL +#define STREST STOREL #define SHIFT_DISCARD SLLV #else #define LDFIRST LOADL -#define LDREST LOADR +#define LDREST LOADR #define STFIRST STOREL -#define STREST STORER +#define STREST STORER #define SHIFT_DISCARD SRLV #endif @@ -316,9 +316,9 @@ EXC( STORE t0, -8(dst), s_exc_p1u) src_unaligned: #define rem t8 - SRL t0, len, LOG_NBYTES+2 # +2 for 4 units/iter + SRL t0, len, LOG_NBYTES+2 # +2 for 4 units/iter beqz t0, cleanup_src_unaligned - and rem, len, (4*NBYTES-1) # rem = len % 4*NBYTES + and rem, len, (4*NBYTES-1) # rem = len % 4*NBYTES 1: /* * Avoid consecutive LD*'s to the same register since some mips @@ -326,13 +326,13 @@ src_unaligned: * It's OK to load FIRST(N+1) before REST(N) because the two addresses * are to the same unit (unless src is aligned, but it's not). */ -EXC( LDFIRST t0, FIRST(0)(src), l_exc) -EXC( LDFIRST t1, FIRST(1)(src), l_exc_copy) - SUB len, len, 4*NBYTES +EXC( LDFIRST t0, FIRST(0)(src), l_exc) +EXC( LDFIRST t1, FIRST(1)(src), l_exc_copy) + SUB len, len, 4*NBYTES EXC( LDREST t0, REST(0)(src), l_exc_copy) EXC( LDREST t1, REST(1)(src), l_exc_copy) -EXC( LDFIRST t2, FIRST(2)(src), l_exc_copy) -EXC( LDFIRST t3, FIRST(3)(src), l_exc_copy) +EXC( LDFIRST t2, FIRST(2)(src), l_exc_copy) +EXC( LDFIRST t3, FIRST(3)(src), l_exc_copy) EXC( LDREST t2, REST(2)(src), l_exc_copy) EXC( LDREST t3, REST(3)(src), l_exc_copy) ADD src, src, 4*NBYTES diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c index 3c1b625a5859..389512e2abd6 100644 --- a/arch/mips/cavium-octeon/octeon-platform.c +++ b/arch/mips/cavium-octeon/octeon-platform.c @@ -410,7 +410,7 @@ int __init octeon_prune_device_tree(void) pip_path = fdt_getprop(initial_boot_params, aliases, "pip", NULL); if (pip_path) { int pip = fdt_path_offset(initial_boot_params, pip_path); - if (pip >= 0) + if (pip >= 0) for (i = 0; i <= 4; i++) octeon_fdt_pip_iface(pip, i, &mac_addr_base); } diff --git a/arch/mips/cavium-octeon/octeon_3xxx.dts b/arch/mips/cavium-octeon/octeon_3xxx.dts index f28b2d0fde22..88cb42d4cc49 100644 --- a/arch/mips/cavium-octeon/octeon_3xxx.dts +++ b/arch/mips/cavium-octeon/octeon_3xxx.dts @@ -3,7 +3,7 @@ * OCTEON 3XXX, 5XXX, 63XX device tree skeleton. * * This device tree is pruned and patched by early boot code before - * use. Because of this, it contains a super-set of the available + * use. Because of this, it contains a super-set of the available * devices and properties. */ / { @@ -433,12 +433,12 @@ cavium,t-we = <45>; cavium,t-rd-hld = <35>; cavium,t-wr-hld = <45>; - cavium,t-pause = <0>; - cavium,t-wait = <0>; - cavium,t-page = <35>; + cavium,t-pause = <0>; + cavium,t-wait = <0>; + cavium,t-page = <35>; cavium,t-rd-dly = <0>; - cavium,pages = <0>; + cavium,pages = <0>; cavium,bus-width = <8>; }; cavium,cs-config@4 { @@ -450,12 +450,12 @@ cavium,t-we = <320>; cavium,t-rd-hld = <320>; cavium,t-wr-hld = <320>; - cavium,t-pause = <320>; - cavium,t-wait = <320>; - cavium,t-page = <320>; + cavium,t-pause = <320>; + cavium,t-wait = <320>; + cavium,t-page = <320>; cavium,t-rd-dly = <0>; - cavium,pages = <0>; + cavium,pages = <0>; cavium,bus-width = <8>; }; cavium,cs-config@5 { @@ -467,12 +467,12 @@ cavium,t-we = <150>; cavium,t-rd-hld = <100>; cavium,t-wr-hld = <30>; - cavium,t-pause = <0>; - cavium,t-wait = <30>; - cavium,t-page = <320>; + cavium,t-pause = <0>; + cavium,t-wait = <30>; + cavium,t-page = <320>; cavium,t-rd-dly = <0>; - cavium,pages = <0>; + cavium,pages = <0>; cavium,bus-width = <16>; }; cavium,cs-config@6 { @@ -484,12 +484,12 @@ cavium,t-we = <150>; cavium,t-rd-hld = <100>; cavium,t-wr-hld = <70>; - cavium,t-pause = <0>; - cavium,t-wait = <0>; - cavium,t-page = <320>; + cavium,t-pause = <0>; + cavium,t-wait = <0>; + cavium,t-page = <320>; cavium,t-rd-dly = <0>; - cavium,pages = <0>; + cavium,pages = <0>; cavium,wait-mode; cavium,bus-width = <16>; }; diff --git a/arch/mips/cavium-octeon/octeon_68xx.dts b/arch/mips/cavium-octeon/octeon_68xx.dts index 1839468932b6..79b46fcb0a11 100644 --- a/arch/mips/cavium-octeon/octeon_68xx.dts +++ b/arch/mips/cavium-octeon/octeon_68xx.dts @@ -3,7 +3,7 @@ * OCTEON 68XX device tree skeleton. * * This device tree is pruned and patched by early boot code before - * use. Because of this, it contains a super-set of the available + * use. Because of this, it contains a super-set of the available * devices and properties. */ / { @@ -469,12 +469,12 @@ cavium,t-we = <35>; cavium,t-rd-hld = <25>; cavium,t-wr-hld = <35>; - cavium,t-pause = <0>; - cavium,t-wait = <300>; - cavium,t-page = <25>; + cavium,t-pause = <0>; + cavium,t-wait = <300>; + cavium,t-page = <25>; cavium,t-rd-dly = <0>; - cavium,pages = <0>; + cavium,pages = <0>; cavium,bus-width = <8>; }; cavium,cs-config@4 { @@ -486,12 +486,12 @@ cavium,t-we = <320>; cavium,t-rd-hld = <320>; cavium,t-wr-hld = <320>; - cavium,t-pause = <320>; - cavium,t-wait = <320>; - cavium,t-page = <320>; + cavium,t-pause = <320>; + cavium,t-wait = <320>; + cavium,t-page = <320>; cavium,t-rd-dly = <0>; - cavium,pages = <0>; + cavium,pages = <0>; cavium,bus-width = <8>; }; cavium,cs-config@5 { @@ -503,12 +503,12 @@ cavium,t-we = <150>; cavium,t-rd-hld = <100>; cavium,t-wr-hld = <300>; - cavium,t-pause = <0>; - cavium,t-wait = <300>; - cavium,t-page = <310>; + cavium,t-pause = <0>; + cavium,t-wait = <300>; + cavium,t-page = <310>; cavium,t-rd-dly = <0>; - cavium,pages = <0>; + cavium,pages = <0>; cavium,bus-width = <16>; }; cavium,cs-config@6 { @@ -520,12 +520,12 @@ cavium,t-we = <150>; cavium,t-rd-hld = <100>; cavium,t-wr-hld = <30>; - cavium,t-pause = <0>; - cavium,t-wait = <30>; - cavium,t-page = <310>; + cavium,t-pause = <0>; + cavium,t-wait = <30>; + cavium,t-page = <310>; cavium,t-rd-dly = <0>; - cavium,pages = <0>; + cavium,pages = <0>; cavium,wait-mode; cavium,bus-width = <16>; }; diff --git a/arch/mips/cavium-octeon/octeon_boot.h b/arch/mips/cavium-octeon/octeon_boot.h index 428864b2ba41..7b066bbca86d 100644 --- a/arch/mips/cavium-octeon/octeon_boot.h +++ b/arch/mips/cavium-octeon/octeon_boot.h @@ -31,7 +31,7 @@ struct boot_init_vector { uint32_t k0_val; /* Address of boot info block structure */ uint64_t boot_info_addr; - uint32_t flags; /* flags */ + uint32_t flags; /* flags */ uint32_t pad; }; @@ -53,20 +53,20 @@ struct linux_app_boot_info { /* If not to copy a lot of bootloader's structures here is only offset of requested member */ -#define AVAIL_COREMASK_OFFSET_IN_LINUX_APP_BOOT_BLOCK 0x765c +#define AVAIL_COREMASK_OFFSET_IN_LINUX_APP_BOOT_BLOCK 0x765c /* hardcoded in bootloader */ -#define LABI_ADDR_IN_BOOTLOADER 0x700 +#define LABI_ADDR_IN_BOOTLOADER 0x700 #define LINUX_APP_BOOT_BLOCK_NAME "linux-app-boot" #define LABI_SIGNATURE 0xAABBCC01 /* from uboot-headers/octeon_mem_map.h */ -#define EXCEPTION_BASE_INCR (4 * 1024) +#define EXCEPTION_BASE_INCR (4 * 1024) /* Increment size for exception base addresses (4k minimum) */ -#define EXCEPTION_BASE_BASE 0 -#define BOOTLOADER_PRIV_DATA_BASE (EXCEPTION_BASE_BASE + 0x800) -#define BOOTLOADER_BOOT_VECTOR (BOOTLOADER_PRIV_DATA_BASE) +#define EXCEPTION_BASE_BASE 0 +#define BOOTLOADER_PRIV_DATA_BASE (EXCEPTION_BASE_BASE + 0x800) +#define BOOTLOADER_BOOT_VECTOR (BOOTLOADER_PRIV_DATA_BASE) #endif /* __OCTEON_BOOT_H__ */ diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index d7e0a09f77c2..c594a3d4f743 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -319,7 +319,7 @@ EXPORT_SYMBOL(octeon_get_io_clock_rate); * exists on most Cavium evaluation boards. If it doesn't exist, then * this function doesn't do anything. * - * @s: String to write + * @s: String to write */ void octeon_write_lcd(const char *s) { @@ -341,7 +341,7 @@ void octeon_write_lcd(const char *s) /** * Return the console uart passed by the bootloader * - * Returns uart (0 or 1) + * Returns uart (0 or 1) */ int octeon_get_boot_uart(void) { @@ -805,7 +805,7 @@ void __init prom_init(void) /* * To do: switch parsing to new style, something like: * parse_crashkernel(arg, sysinfo->system_dram_size, - * &crashk_size, &crashk_base); + * &crashk_size, &crashk_base); */ #endif } else if (strlen(arcs_cmdline) + strlen(arg) + 1 < @@ -1013,7 +1013,7 @@ void __init plat_mem_setup(void) } /* - * Emit one character to the boot UART. Exported for use by the + * Emit one character to the boot UART. Exported for use by the * watchdog timer. */ int prom_putchar(char c) diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c index ee1fb9f7f517..295137dfdc37 100644 --- a/arch/mips/cavium-octeon/smp.c +++ b/arch/mips/cavium-octeon/smp.c @@ -55,7 +55,7 @@ static irqreturn_t mailbox_interrupt(int irq, void *dev_id) /** * Cause the function described by call_data to be executed on the passed - * cpu. When the function has finished, increment the finished field of + * cpu. When the function has finished, increment the finished field of * call_data. */ void octeon_send_ipi_single(int cpu, unsigned int action) @@ -126,8 +126,8 @@ static void octeon_smp_setup(void) #ifdef CONFIG_HOTPLUG_CPU /* - * The possible CPUs are all those present on the chip. We - * will assign CPU numbers for possible cores as well. Cores + * The possible CPUs are all those present on the chip. We + * will assign CPU numbers for possible cores as well. Cores * are always consecutively numberd from 0. */ for (id = 0; id < num_cores && id < NR_CPUS; id++) { @@ -332,7 +332,7 @@ extern void kernel_entry(unsigned long arg1, ...); static void start_after_reset(void) { - kernel_entry(0, 0, 0); /* set a2 = 0 for secondary core */ + kernel_entry(0, 0, 0); /* set a2 = 0 for secondary core */ } static int octeon_update_boot_vector(unsigned int cpu) @@ -401,7 +401,7 @@ static int __cpuinit register_cavium_notifier(void) } late_initcall(register_cavium_notifier); -#endif /* CONFIG_HOTPLUG_CPU */ +#endif /* CONFIG_HOTPLUG_CPU */ struct plat_smp_ops octeon_smp_ops = { .send_ipi_single = octeon_send_ipi_single, |