[MIPS] DDB5477: Remove support

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 0 insertions, 132 deletions

diff --git a/arch/mips/ddb5xxx/common/prom.c b/arch/mips/ddb5xxx/common/prom.c
deleted file mode 100644
index 54a857b5e3ba..000000000000
--- a/arch/mips/ddb5xxx/common/prom.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <asm/ddb5xxx/ddb5xxx.h>
-#include <asm/debug.h>
-
-const char *get_system_type(void)
-{
-	switch (mips_machtype) {
-	case MACH_NEC_DDB5477:		return "NEC DDB Vrc-5477";
-	case MACH_NEC_ROCKHOPPER:	return "NEC Rockhopper";
-	case MACH_NEC_ROCKHOPPERII:     return "NEC RockhopperII";
-	default:			return "Unknown NEC board";
-	}
-}
-
-#if defined(CONFIG_DDB5477)
-void ddb5477_runtime_detection(void);
-#endif
-
-/* [jsun@junsun.net] PMON passes arguments in C main() style */
-void __init prom_init(void)
-{
-	int argc = fw_arg0;
-	char **arg = (char**) fw_arg1;
-	int i;
-
-	/* if user passes kernel args, ignore the default one */
-	if (argc > 1)
-		arcs_cmdline[0] = '\0';
-
-	/* arg[0] is "g", the rest is boot parameters */
-	for (i = 1; i < argc; i++) {
-		if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
-		    >= sizeof(arcs_cmdline))
-			break;
-		strcat(arcs_cmdline, arg[i]);
-		strcat(arcs_cmdline, " ");
-	}
-
-	mips_machgroup = MACH_GROUP_NEC_DDB;
-
-#if defined(CONFIG_DDB5477)
-	ddb5477_runtime_detection();
-	add_memory_region(0, board_ram_size, BOOT_MEM_RAM);
-#endif
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
-
-#if defined(CONFIG_DDB5477)
-
-#define DEFAULT_LCS1_BASE 0x19000000
-#define TESTVAL1 'K'
-#define TESTVAL2 'S'
-
-int board_ram_size;
-void ddb5477_runtime_detection(void)
-{
-	volatile char *test_offset;
-	char saved_test_byte;
-
-        /* Determine if this is a DDB5477 board, or a BSB-VR0300
-           base board.  We can tell by checking for the location of
-           the NVRAM.  It lives at the beginning of LCS1 on the DDB5477,
-           and the beginning of LCS1 on the BSB-VR0300 is flash memory.
-           The first 2K of the NVRAM are reserved, so don't we'll poke
-           around just after that.
-         */
-
-	/* We can only use the PCI bus to distinquish between
-	   the Rockhopper and RockhopperII backplanes and this must
-	   wait until ddb5477_board_init() in setup.c after the 5477
-	   is initialized.  So, until then handle
-	   both Rockhopper and RockhopperII backplanes as Rockhopper 1
-	 */
-
-        test_offset = (char *)KSEG1ADDR(DEFAULT_LCS1_BASE + 0x800);
-        saved_test_byte = *test_offset;
-
-        *test_offset = TESTVAL1;
-        if (*test_offset != TESTVAL1) {
-                /* We couldn't set our test value, so it must not be NVRAM,
-                   so it's a BSB_VR0300 */
-		mips_machtype = MACH_NEC_ROCKHOPPER;
-        } else {
-                /* We may have gotten lucky, and the TESTVAL1 was already
-                   stored at the test location, so we must check a second
-                   test value */
-                *test_offset = TESTVAL2;
-                if (*test_offset != TESTVAL2) {
-                        /* OK, we couldn't set this value either, so it must
-                           definately be a BSB_VR0300 */
-			mips_machtype = MACH_NEC_ROCKHOPPER;
-                } else {
-                        /* We could change the value twice, so it must be
-                        NVRAM, so it's a DDB_VRC5477 */
-			mips_machtype = MACH_NEC_DDB5477;
-                }
-        }
-        /* Restore the original byte */
-        *test_offset = saved_test_byte;
-
-	/* before we know a better way, we will trust PMON for getting
-	 * RAM size
-	 */
-	board_ram_size = 1 << (36 - (ddb_in32(DDB_SDRAM0) & 0xf));
-
-	db_run(printk("DDB run-time detection : %s, %d MB RAM\n",
-				mips_machtype == MACH_NEC_DDB5477 ?
-				"DDB5477" : "Rockhopper",
-				board_ram_size >> 20));
-
-	/* we can't handle ram size > 128 MB */
-	db_assert(board_ram_size <= (128 << 20));
-}
-#endif