Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:

 o Add basic support for the Mediatek/Ralink Wireless SoC family.

 o The Qualcomm Atheros platform is extended by support for the new
   QCA955X SoC series as well as a bunch of patches that get the code
   ready for OF support.

 o Lantiq and BCM47XX platform have a few improvements and bug fixes.

 o MIPS has sent a few patches that get the kernel ready for the
   upcoming microMIPS support.

 o The rest of the series is made up of small bug fixes and cleanups
   that relate to various parts of the MIPS code.  The biggy in there is
   a whitespace cleanup.  After I was sent another set of whitespace
   cleanup patches I decided it was the time to clean the whitespace
   "issues" for once and and that touches many files below arch/mips/.

Fix up silly conflicts, mostly due to whitespace cleanups.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (105 commits)
  MIPS: Quit exporting kernel internel break codes to uapi/asm/break.h
  MIPS: remove broken conditional inside vpe loader code
  MIPS: SMTC: fix implicit declaration of set_vi_handler
  MIPS: early_printk: drop __init annotations
  MIPS: Probe for and report hardware virtualization support.
  MIPS: ath79: add support for the Qualcomm Atheros AP136-010 board
  MIPS: ath79: add USB controller registration code for the QCA955X SoCs
  MIPS: ath79: add PCI controller registration code for the QCA955X SoCs
  MIPS: ath79: add WMAC registration code for the QCA955X SoCs
  MIPS: ath79: register UART for the QCA955X SoCs
  MIPS: ath79: add QCA955X specific glue to ath79_device_reset_{set, clear}
  MIPS: ath79: add GPIO setup code for the QCA955X SoCs
  MIPS: ath79: add IRQ handling code for the QCA955X SoCs
  MIPS: ath79: add clock setup code for the QCA955X SoCs
  MIPS: ath79: add SoC detection code for the QCA955X SoCs
  MIPS: ath79: add early printk support for the QCA955X SoCs
  MIPS: ath79: fix WMAC IRQ resource assignment
  mips: reserve elfcorehdr
  mips: Make sure kernel memory is in iomem
  MIPS: ath79: use dynamically allocated USB platform devices
  ...

1 files changed, 79 insertions, 79 deletions

diff --git a/arch/mips/include/uapi/asm/termbits.h b/arch/mips/include/uapi/asm/termbits.h
index 76630b396fac..2750203e1e7d 100644
--- a/arch/mips/include/uapi/asm/termbits.h
+++ b/arch/mips/include/uapi/asm/termbits.h
@@ -53,7 +53,7 @@ struct ktermios {
 };
 
 /* c_cc characters */
-#define VINTR		 0		/* Interrupt character [ISIG].  */
+#define VINTR		 0		/* Interrupt character [ISIG].	*/
 #define VQUIT		 1		/* Quit character [ISIG].  */
 #define VERASE		 2		/* Erase character [ICANON].  */
 #define VKILL		 3		/* Kill-line character [ICANON].  */
@@ -72,7 +72,7 @@ struct ktermios {
 #define VDSUSP		11		/* Delayed suspend character [ISIG].  */
 #endif
 #define VREPRINT	12		/* Reprint-line character [ICANON].  */
-#define VDISCARD	13		/* Discard character [IEXTEN].  */
+#define VDISCARD	13		/* Discard character [IEXTEN].	*/
 #define VWERASE		14		/* Word-erase character [ICANON].  */
 #define VLNEXT		15		/* Literal-next character [IEXTEN].  */
 #define VEOF		16		/* End-of-file character [ICANON].  */
@@ -92,7 +92,7 @@ struct ktermios {
 #define IXON	0002000		/* Enable start/stop output control.  */
 #define IXANY	0004000		/* Any character will restart after stop.  */
 #define IXOFF	0010000		/* Enable start/stop input control.  */
-#define IMAXBEL	0020000		/* Ring bell when input queue is full.  */
+#define IMAXBEL 0020000		/* Ring bell when input queue is full.	*/
 #define IUTF8	0040000		/* Input is UTF-8 */
 
 /* c_oflag bits */
@@ -105,123 +105,123 @@ struct ktermios {
 #define OFILL	0000100
 #define OFDEL	0000200
 #define NLDLY	0000400
-#define   NL0	0000000
-#define   NL1	0000400
+#define	  NL0	0000000
+#define	  NL1	0000400
 #define CRDLY	0003000
-#define   CR0	0000000
-#define   CR1	0001000
-#define   CR2	0002000
-#define   CR3	0003000
+#define	  CR0	0000000
+#define	  CR1	0001000
+#define	  CR2	0002000
+#define	  CR3	0003000
 #define TABDLY	0014000
-#define   TAB0	0000000
-#define   TAB1	0004000
-#define   TAB2	0010000
-#define   TAB3	0014000
-#define   XTABS	0014000
+#define	  TAB0	0000000
+#define	  TAB1	0004000
+#define	  TAB2	0010000
+#define	  TAB3	0014000
+#define	  XTABS 0014000
 #define BSDLY	0020000
-#define   BS0	0000000
-#define   BS1	0020000
+#define	  BS0	0000000
+#define	  BS1	0020000
 #define VTDLY	0040000
-#define   VT0	0000000
-#define   VT1	0040000
+#define	  VT0	0000000
+#define	  VT1	0040000
 #define FFDLY	0100000
-#define   FF0	0000000
-#define   FF1	0100000
+#define	  FF0	0000000
+#define	  FF1	0100000
 /*
 #define PAGEOUT ???
-#define WRAP    ???
+#define WRAP	???
  */
 
 /* c_cflag bit meaning */
 #define CBAUD	0010017
-#define  B0	0000000		/* hang up */
-#define  B50	0000001
-#define  B75	0000002
-#define  B110	0000003
-#define  B134	0000004
-#define  B150	0000005
-#define  B200	0000006
-#define  B300	0000007
-#define  B600	0000010
-#define  B1200	0000011
-#define  B1800	0000012
-#define  B2400	0000013
-#define  B4800	0000014
-#define  B9600	0000015
-#define  B19200	0000016
-#define  B38400	0000017
+#define	 B0	0000000		/* hang up */
+#define	 B50	0000001
+#define	 B75	0000002
+#define	 B110	0000003
+#define	 B134	0000004
+#define	 B150	0000005
+#define	 B200	0000006
+#define	 B300	0000007
+#define	 B600	0000010
+#define	 B1200	0000011
+#define	 B1800	0000012
+#define	 B2400	0000013
+#define	 B4800	0000014
+#define	 B9600	0000015
+#define	 B19200 0000016
+#define	 B38400 0000017
 #define EXTA B19200
 #define EXTB B38400
 #define CSIZE	0000060		/* Number of bits per byte (mask).  */
-#define   CS5	0000000		/* 5 bits per byte.  */
-#define   CS6	0000020		/* 6 bits per byte.  */
-#define   CS7	0000040		/* 7 bits per byte.  */
-#define   CS8	0000060		/* 8 bits per byte.  */
+#define	  CS5	0000000		/* 5 bits per byte.  */
+#define	  CS6	0000020		/* 6 bits per byte.  */
+#define	  CS7	0000040		/* 7 bits per byte.  */
+#define	  CS8	0000060		/* 8 bits per byte.  */
 #define CSTOPB	0000100		/* Two stop bits instead of one.  */
 #define CREAD	0000200		/* Enable receiver.  */
 #define PARENB	0000400		/* Parity enable.  */
-#define PARODD	0001000		/* Odd parity instead of even.  */
+#define PARODD	0001000		/* Odd parity instead of even.	*/
 #define HUPCL	0002000		/* Hang up on last close.  */
 #define CLOCAL	0004000		/* Ignore modem status lines.  */
 #define CBAUDEX 0010000
-#define    BOTHER 0010000
-#define    B57600 0010001
-#define   B115200 0010002
-#define   B230400 0010003
-#define   B460800 0010004
-#define   B500000 0010005
-#define   B576000 0010006
-#define   B921600 0010007
-#define  B1000000 0010010
-#define  B1152000 0010011
-#define  B1500000 0010012
-#define  B2000000 0010013
-#define  B2500000 0010014
-#define  B3000000 0010015
-#define  B3500000 0010016
-#define  B4000000 0010017
+#define	   BOTHER 0010000
+#define	   B57600 0010001
+#define	  B115200 0010002
+#define	  B230400 0010003
+#define	  B460800 0010004
+#define	  B500000 0010005
+#define	  B576000 0010006
+#define	  B921600 0010007
+#define	 B1000000 0010010
+#define	 B1152000 0010011
+#define	 B1500000 0010012
+#define	 B2000000 0010013
+#define	 B2500000 0010014
+#define	 B3000000 0010015
+#define	 B3500000 0010016
+#define	 B4000000 0010017
 #define CIBAUD	  002003600000	/* input baud rate */
-#define CMSPAR    010000000000	/* mark or space (stick) parity */
+#define CMSPAR	  010000000000	/* mark or space (stick) parity */
 #define CRTSCTS	  020000000000	/* flow control */
 
-#define IBSHIFT	16		/* Shift from CBAUD to CIBAUD */
+#define IBSHIFT 16		/* Shift from CBAUD to CIBAUD */
 
 /* c_lflag bits */
 #define ISIG	0000001		/* Enable signals.  */
 #define ICANON	0000002		/* Do erase and kill processing.  */
 #define XCASE	0000004
-#define ECHO	0000010		/* Enable echo.  */
+#define ECHO	0000010		/* Enable echo.	 */
 #define ECHOE	0000020		/* Visual erase for ERASE.  */
-#define ECHOK	0000040		/* Echo NL after KILL.  */
-#define ECHONL	0000100		/* Echo NL even if ECHO is off.  */
+#define ECHOK	0000040		/* Echo NL after KILL.	*/
+#define ECHONL	0000100		/* Echo NL even if ECHO is off.	 */
 #define NOFLSH	0000200		/* Disable flush after interrupt.  */
 #define IEXTEN	0000400		/* Enable DISCARD and LNEXT.  */
-#define ECHOCTL	0001000		/* Echo control characters as ^X.  */
-#define ECHOPRT	0002000		/* Hardcopy visual erase.  */
+#define ECHOCTL 0001000		/* Echo control characters as ^X.  */
+#define ECHOPRT 0002000		/* Hardcopy visual erase.  */
 #define ECHOKE	0004000		/* Visual erase for KILL.  */
 #define FLUSHO	0020000
 #define PENDIN	0040000		/* Retype pending input (state).  */
-#define TOSTOP	0100000		/* Send SIGTTOU for background output.  */
-#define ITOSTOP	TOSTOP
-#define EXTPROC	0200000		/* External processing on pty */
+#define TOSTOP	0100000		/* Send SIGTTOU for background output.	*/
+#define ITOSTOP TOSTOP
+#define EXTPROC 0200000		/* External processing on pty */
 
 /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+#define TIOCSER_TEMT	0x01	/* Transmitter physically empty */
 
 /* tcflow() and TCXONC use these */
-#define	TCOOFF		0	/* Suspend output.  */
-#define	TCOON		1	/* Restart suspended output.  */
-#define	TCIOFF		2	/* Send a STOP character.  */
-#define	TCION		3	/* Send a START character.  */
+#define TCOOFF		0	/* Suspend output.  */
+#define TCOON		1	/* Restart suspended output.  */
+#define TCIOFF		2	/* Send a STOP character.  */
+#define TCION		3	/* Send a START character.  */
 
 /* tcflush() and TCFLSH use these */
-#define	TCIFLUSH	0	/* Discard data received but not yet read.  */
-#define	TCOFLUSH	1	/* Discard data written but not yet sent.  */
-#define	TCIOFLUSH	2	/* Discard all pending data.  */
+#define TCIFLUSH	0	/* Discard data received but not yet read.  */
+#define TCOFLUSH	1	/* Discard data written but not yet sent.  */
+#define TCIOFLUSH	2	/* Discard all pending data.  */
 
 /* tcsetattr uses these */
-#define	TCSANOW		TCSETS	/* Change immediately.  */
-#define	TCSADRAIN	TCSETSW	/* Change when pending output is written.  */
-#define	TCSAFLUSH	TCSETSF	/* Flush pending input before changing.  */
+#define TCSANOW		TCSETS	/* Change immediately.	*/
+#define TCSADRAIN	TCSETSW /* Change when pending output is written.  */
+#define TCSAFLUSH	TCSETSF /* Flush pending input before changing.	 */
 
 #endif /* _ASM_TERMBITS_H */