irqchip: mips-gic: Stop using per-platform mapping tables

Now that the GIC properly uses IRQ domains, kill off the per-platform
routing tables that were used to make the GIC appear transparent.

This includes:
 - removing the mapping tables and the support for applying them,
 - moving GIC IPI support to the GIC driver,
 - properly routing the i8259 through the GIC on Malta, and
 - updating IRQ assignments on SEAD-3 when the GIC is present.

Platforms no longer will pass an interrupt mapping table to gic_init.
Instead, they will pass the CPU interrupt vector (2 - 7) that they
expect the GIC to route interrupts to.  Note that in EIC mode this
value is ignored and all GIC interrupts are routed to EIC vector 1.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Reviewed-by: Qais Yousef <qais.yousef@imgtec.com>
Tested-by: Qais Yousef <qais.yousef@imgtec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jeffrey Deans <jeffrey.deans@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Jonas Gorski <jogo@openwrt.org>
Cc: John Crispin <blogic@openwrt.org>
Cc: David Daney <ddaney.cavm@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7816/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

3 files changed, 22 insertions, 40 deletions

diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
index efcf4dec1229..cfbf907ebfa5 100644
--- a/arch/mips/include/asm/gic.h
+++ b/arch/mips/include/asm/gic.h
@@ -316,31 +316,6 @@
 	GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_MAP_TO_VPE_REG_OFF(intr, vpe)), \
 		 GIC_SH_MAP_TO_VPE_REG_BIT(vpe))
 
-/*
- * Interrupt Meta-data specification. The ipiflag helps
- * in building ipi_map.
- */
-struct gic_intr_map {
-	unsigned int cpunum;	/* Directed to this CPU */
-#define GIC_UNUSED		0xdead			/* Dummy data */
-	unsigned int pin;	/* Directed to this Pin */
-	unsigned int polarity;	/* Polarity : +/-	*/
-	unsigned int trigtype;	/* Trigger  : Edge/Levl */
-	unsigned int flags;	/* Misc flags	*/
-#define GIC_FLAG_TRANSPARENT   0x01
-};
-
-/*
- * This is only used in EIC mode. This helps to figure out which
- * shared interrupts we need to process when we get a vector interrupt.
- */
-#define GIC_MAX_SHARED_INTR  0x5
-struct gic_shared_intr_map {
-	unsigned int num_shared_intr;
-	unsigned int intr_list[GIC_MAX_SHARED_INTR];
-	unsigned int local_intr_mask;
-};
-
 /* GIC nomenclature for Core Interrupt Pins. */
 #define GIC_CPU_INT0		0 /* Core Interrupt 2 */
 #define GIC_CPU_INT1		1 /* .		      */
@@ -349,6 +324,9 @@ struct gic_shared_intr_map {
 #define GIC_CPU_INT4		4 /* .		      */
 #define GIC_CPU_INT5		5 /* Core Interrupt 7 */
 
+/* Add 2 to convert GIC CPU pin to core interrupt */
+#define GIC_CPU_PIN_OFFSET	2
+
 /* Local GIC interrupts. */
 #define GIC_INT_TMR		(GIC_CPU_INT5)
 #define GIC_INT_PERFCTR		(GIC_CPU_INT5)
@@ -365,13 +343,12 @@ struct gic_shared_intr_map {
 extern unsigned int gic_present;
 extern unsigned int gic_frequency;
 extern unsigned long _gic_base;
-extern unsigned int gic_irq_base;
 extern unsigned int gic_irq_flags[];
-extern struct gic_shared_intr_map gic_shared_intr_map[];
+extern unsigned int gic_cpu_pin;
 
 extern void gic_init(unsigned long gic_base_addr,
-	unsigned long gic_addrspace_size, struct gic_intr_map *intrmap,
-	unsigned int intrmap_size, unsigned int irqbase);
+	unsigned long gic_addrspace_size, unsigned int cpu_vec,
+	unsigned int irqbase);
 extern void gic_clocksource_init(unsigned int);
 extern unsigned int gic_compare_int (void);
 extern cycle_t gic_read_count(void);
diff --git a/arch/mips/include/asm/mips-boards/maltaint.h b/arch/mips/include/asm/mips-boards/maltaint.h
index d741628e3397..bdd6f392f160 100644
--- a/arch/mips/include/asm/mips-boards/maltaint.h
+++ b/arch/mips/include/asm/mips-boards/maltaint.h
@@ -20,11 +20,10 @@
 #define MIPSCPU_INT_SW1		1
 #define MIPSCPU_INT_MB0		2
 #define MIPSCPU_INT_I8259A	MIPSCPU_INT_MB0
+#define MIPSCPU_INT_GIC		MIPSCPU_INT_MB0 /* GIC chained interrupt */
 #define MIPSCPU_INT_MB1		3
 #define MIPSCPU_INT_SMI		MIPSCPU_INT_MB1
-#define MIPSCPU_INT_IPI0	MIPSCPU_INT_MB1 /* GIC IPI */
 #define MIPSCPU_INT_MB2		4
-#define MIPSCPU_INT_IPI1	MIPSCPU_INT_MB2 /* GIC IPI */
 #define MIPSCPU_INT_MB3		5
 #define MIPSCPU_INT_COREHI	MIPSCPU_INT_MB3
 #define MIPSCPU_INT_MB4		6
@@ -61,14 +60,7 @@
 #define MSC01E_INT_PERFCTR	10
 #define MSC01E_INT_CPUCTR	11
 
-/* External Interrupts used for IPI */
-#define GIC_IPI_EXT_INTR_RESCHED_VPE0	16
-#define GIC_IPI_EXT_INTR_CALLFNC_VPE0	17
-#define GIC_IPI_EXT_INTR_RESCHED_VPE1	18
-#define GIC_IPI_EXT_INTR_CALLFNC_VPE1	19
-#define GIC_IPI_EXT_INTR_RESCHED_VPE2	20
-#define GIC_IPI_EXT_INTR_CALLFNC_VPE2	21
-#define GIC_IPI_EXT_INTR_RESCHED_VPE3	22
-#define GIC_IPI_EXT_INTR_CALLFNC_VPE3	23
+/* GIC external interrupts */
+#define GIC_INT_I8259A		3
 
 #endif /* !(_MIPS_MALTAINT_H) */
diff --git a/arch/mips/include/asm/mips-boards/sead3int.h b/arch/mips/include/asm/mips-boards/sead3int.h
index 11ebec94f807..a2e0095440fe 100644
--- a/arch/mips/include/asm/mips-boards/sead3int.h
+++ b/arch/mips/include/asm/mips-boards/sead3int.h
@@ -14,4 +14,17 @@
 #define GIC_BASE_ADDR		0x1b1c0000
 #define GIC_ADDRSPACE_SZ	(128 * 1024)
 
+/* CPU interrupt offsets */
+#define CPU_INT_GIC		2
+#define CPU_INT_EHCI		2
+#define CPU_INT_UART0		4
+#define CPU_INT_UART1		4
+#define CPU_INT_NET		6
+
+/* GIC interrupt offsets */
+#define GIC_INT_NET		0
+#define GIC_INT_UART1		2
+#define GIC_INT_UART0		3
+#define GIC_INT_EHCI		5
+
 #endif /* !(_MIPS_SEAD3INT_H) */