[MIPS] MIPSsim: Move code away from the other MIPS Inc. BSP code.

It shares no code at all.  While at it also fix up the beginning bitrot.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 200 insertions, 0 deletions

diff --git a/arch/mips/mipssim/sim_time.c b/arch/mips/mipssim/sim_time.c
new file mode 100644
index 000000000000..874a18e8ac24
--- /dev/null
+++ b/arch/mips/mipssim/sim_time.c
@@ -0,0 +1,200 @@
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/mc146818rtc.h>
+#include <linux/mipsregs.h>
+#include <linux/smp.h>
+#include <linux/timex.h>
+
+#include <asm/hardirq.h>
+#include <asm/div64.h>
+#include <asm/cpu.h>
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/mc146818-time.h>
+#include <asm/msc01_ic.h>
+
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/prom.h>
+#include <asm/mips-boards/simint.h>
+
+
+unsigned long cpu_khz;
+
+irqreturn_t sim_timer_interrupt(int irq, void *dev_id)
+{
+#ifdef CONFIG_SMP
+	int cpu = smp_processor_id();
+
+	/*
+	 * CPU 0 handles the global timer interrupt job
+	 * resets count/compare registers to trigger next timer int.
+	 */
+#ifndef CONFIG_MIPS_MT_SMTC
+	if (cpu == 0) {
+		timer_interrupt(irq, dev_id);
+	} else {
+		/* Everyone else needs to reset the timer int here as
+		   ll_local_timer_interrupt doesn't */
+		/*
+		 * FIXME: need to cope with counter underflow.
+		 * More support needs to be added to kernel/time for
+		 * counter/timer interrupts on multiple CPU's
+		 */
+		write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ));
+	}
+#else /* SMTC */
+	/*
+	 *  In SMTC system, one Count/Compare set exists per VPE.
+	 *  Which TC within a VPE gets the interrupt is essentially
+	 *  random - we only know that it shouldn't be one with
+	 *  IXMT set. Whichever TC gets the interrupt needs to
+	 *  send special interprocessor interrupts to the other
+	 *  TCs to make sure that they schedule, etc.
+	 *
+	 *  That code is specific to the SMTC kernel, not to
+	 *  the simulation platform, so it's invoked from
+	 *  the general MIPS timer_interrupt routine.
+	 *
+	 * We have a problem in that the interrupt vector code
+	 * had to turn off the timer IM bit to avoid redundant
+	 * entries, but we may never get to mips_cpu_irq_end
+	 * to turn it back on again if the scheduler gets
+	 * involved.  So we clear the pending timer here,
+	 * and re-enable the mask...
+	 */
+
+	int vpflags = dvpe();
+	write_c0_compare (read_c0_count() - 1);
+	clear_c0_cause(0x100 << cp0_compare_irq);
+	set_c0_status(0x100 << cp0_compare_irq);
+	irq_enable_hazard();
+	evpe(vpflags);
+
+	if (cpu_data[cpu].vpe_id == 0)
+		timer_interrupt(irq, dev_id);
+	else
+		write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ));
+	smtc_timer_broadcast(cpu_data[cpu].vpe_id);
+
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+	/*
+	 * every CPU should do profiling and process accounting
+	 */
+	local_timer_interrupt (irq, dev_id);
+
+	return IRQ_HANDLED;
+#else
+	return timer_interrupt (irq, dev_id);
+#endif
+}
+
+
+
+/*
+ * Estimate CPU frequency.  Sets mips_hpt_frequency as a side-effect
+ */
+static unsigned int __init estimate_cpu_frequency(void)
+{
+	unsigned int prid = read_c0_prid() & 0xffff00;
+	unsigned int count;
+
+#if 1
+	/*
+	 * hardwire the board frequency to 12MHz.
+	 */
+
+	if ((prid == (PRID_COMP_MIPS | PRID_IMP_20KC)) ||
+	    (prid == (PRID_COMP_MIPS | PRID_IMP_25KF)))
+		count = 12000000;
+	else
+		count =  6000000;
+#else
+	unsigned int flags;
+
+	local_irq_save(flags);
+
+	/* Start counter exactly on falling edge of update flag */
+	while (CMOS_READ(RTC_REG_A) & RTC_UIP);
+	while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
+
+	/* Start r4k counter. */
+	write_c0_count(0);
+
+	/* Read counter exactly on falling edge of update flag */
+	while (CMOS_READ(RTC_REG_A) & RTC_UIP);
+	while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
+
+	count = read_c0_count();
+
+	/* restore interrupts */
+	local_irq_restore(flags);
+#endif
+
+	mips_hpt_frequency = count;
+
+	if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) &&
+	    (prid != (PRID_COMP_MIPS | PRID_IMP_25KF)))
+		count *= 2;
+
+	count += 5000;    /* round */
+	count -= count%10000;
+
+	return count;
+}
+
+void __init sim_time_init(void)
+{
+	unsigned int est_freq, flags;
+
+	local_irq_save(flags);
+
+	/* Set Data mode - binary. */
+	CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
+
+	est_freq = estimate_cpu_frequency ();
+
+	printk(KERN_INFO "CPU frequency %d.%02d MHz\n", est_freq / 1000000,
+	       (est_freq % 1000000) * 100 / 1000000);
+
+	cpu_khz = est_freq / 1000;
+
+	local_irq_restore(flags);
+}
+
+static int mips_cpu_timer_irq;
+
+static void mips_timer_dispatch(void)
+{
+	do_IRQ(mips_cpu_timer_irq);
+}
+
+
+void __init plat_timer_setup(struct irqaction *irq)
+{
+	if (cpu_has_veic) {
+		set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch);
+		mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
+	} else {
+		if (cpu_has_vint)
+			set_vi_handler(cp0_compare_irq, mips_timer_dispatch);
+		mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+	}
+
+	/* we are using the cpu counter for timer interrupts */
+	irq->handler = sim_timer_interrupt;
+	setup_irq(mips_cpu_timer_irq, irq);
+
+#ifdef CONFIG_SMP
+	/* irq_desc(riptor) is a global resource, when the interrupt overlaps
+	   on seperate cpu's the first one tries to handle the second interrupt.
+	   The effect is that the int remains disabled on the second cpu.
+	   Mark the interrupt with IRQ_PER_CPU to avoid any confusion */
+	irq_desc[mips_cpu_timer_irq].flags |= IRQ_PER_CPU;
+	set_irq_handler(mips_cpu_timer_irq, handle_percpu_irq);
+#endif
+}