Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:

 - More work on DT support for various platforms

 - Various fixes that were to late to make it straight into 3.9

 - Improved platform support, in particular the Netlogic XLR and
   BCM63xx, and the SEAD3 and Malta eval boards.

 - Support for several Ralink SOC families.

 - Complete support for the microMIPS ASE which basically reencodes the
   existing MIPS32/MIPS64 ISA to use non-constant size instructions.

 - Some fallout from LTO work which remove old cruft and will generally
   make the MIPS kernel easier to maintain and resistant to compiler
   optimization, even in absence of LTO.

 - KVM support.  While MIPS has announced hardware virtualization
   extensions this KVM extension uses trap and emulate mode for
   virtualization of MIPS32.  More KVM work to add support for VZ
   hardware virtualizaiton extensions and MIPS64 will probably already
   be merged for 3.11.

Most of this has been sitting in -next for a long time.  All defconfigs
have been build or run time tested except three for which fixes are being
sent by other maintainers.

Semantic conflict with kvm updates done as per Ralf

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (118 commits)
  MIPS: Add new GIC clockevent driver.
  MIPS: Formatting clean-ups for clocksources.
  MIPS: Refactor GIC clocksource code.
  MIPS: Move 'gic_frequency' to common location.
  MIPS: Move 'gic_present' to common location.
  MIPS: MIPS16e: Add unaligned access support.
  MIPS: MIPS16e: Support handling of delay slots.
  MIPS: MIPS16e: Add instruction formats.
  MIPS: microMIPS: Optimise 'strnlen' core library function.
  MIPS: microMIPS: Optimise 'strlen' core library function.
  MIPS: microMIPS: Optimise 'strncpy' core library function.
  MIPS: microMIPS: Optimise 'memset' core library function.
  MIPS: microMIPS: Add configuration option for microMIPS kernel.
  MIPS: microMIPS: Disable LL/SC and fix linker bug.
  MIPS: microMIPS: Add vdso support.
  MIPS: microMIPS: Add unaligned access support.
  MIPS: microMIPS: Support handling of delay slots.
  MIPS: microMIPS: Add support for exception handling.
  MIPS: microMIPS: Floating point support.
  MIPS: microMIPS: Fix macro naming in micro-assembler.
  ...

8 files changed, 246 insertions, 52 deletions

diff --git a/arch/mips/netlogic/Kconfig b/arch/mips/netlogic/Kconfig
index 3c05bf9e280a..e0873a31ebaa 100644
--- a/arch/mips/netlogic/Kconfig
+++ b/arch/mips/netlogic/Kconfig
@@ -2,13 +2,22 @@ if NLM_XLP_BOARD || NLM_XLR_BOARD
 
 if NLM_XLP_BOARD
 config DT_XLP_EVP
-	bool "Built-in device tree for XLP EVP/SVP boards"
+	bool "Built-in device tree for XLP EVP boards"
 	default y
 	help
-	  Add an FDT blob for XLP EVP and SVP boards into the kernel.
+	  Add an FDT blob for XLP EVP boards into the kernel.
 	  This DTB will be used if the firmware does not pass in a DTB
-          pointer to the kernel.  The corresponding DTS file is at
-          arch/mips/netlogic/dts/xlp_evp.dts
+	  pointer to the kernel.  The corresponding DTS file is at
+	  arch/mips/netlogic/dts/xlp_evp.dts
+
+config DT_XLP_SVP
+	bool "Built-in device tree for XLP SVP boards"
+	default y
+	help
+	  Add an FDT blob for XLP VP boards into the kernel.
+	  This DTB will be used if the firmware does not pass in a DTB
+	  pointer to the kernel.  The corresponding DTS file is at
+	  arch/mips/netlogic/dts/xlp_svp.dts
 
 config NLM_MULTINODE
 	bool "Support for multi-chip boards"
diff --git a/arch/mips/netlogic/common/smp.c b/arch/mips/netlogic/common/smp.c
index 2bb95dcfe20a..ffba52489bef 100644
--- a/arch/mips/netlogic/common/smp.c
+++ b/arch/mips/netlogic/common/smp.c
@@ -148,8 +148,7 @@ void nlm_cpus_done(void)
 int nlm_cpu_ready[NR_CPUS];
 unsigned long nlm_next_gp;
 unsigned long nlm_next_sp;
-
-cpumask_t phys_cpu_present_map;
+static cpumask_t phys_cpu_present_mask;
 
 void nlm_boot_secondary(int logical_cpu, struct task_struct *idle)
 {
@@ -169,11 +168,12 @@ void __init nlm_smp_setup(void)
 {
 	unsigned int boot_cpu;
 	int num_cpus, i, ncore;
+	char buf[64];
 
 	boot_cpu = hard_smp_processor_id();
-	cpumask_clear(&phys_cpu_present_map);
+	cpumask_clear(&phys_cpu_present_mask);
 
-	cpumask_set_cpu(boot_cpu, &phys_cpu_present_map);
+	cpumask_set_cpu(boot_cpu, &phys_cpu_present_mask);
 	__cpu_number_map[boot_cpu] = 0;
 	__cpu_logical_map[0] = boot_cpu;
 	set_cpu_possible(0, true);
@@ -185,7 +185,7 @@ void __init nlm_smp_setup(void)
 		 * it is only set for ASPs (see smpboot.S)
 		 */
 		if (nlm_cpu_ready[i]) {
-			cpumask_set_cpu(i, &phys_cpu_present_map);
+			cpumask_set_cpu(i, &phys_cpu_present_mask);
 			__cpu_number_map[i] = num_cpus;
 			__cpu_logical_map[num_cpus] = i;
 			set_cpu_possible(num_cpus, true);
@@ -193,16 +193,19 @@ void __init nlm_smp_setup(void)
 		}
 	}
 
+	cpumask_scnprintf(buf, ARRAY_SIZE(buf), &phys_cpu_present_mask);
+	pr_info("Physical CPU mask: %s\n", buf);
+	cpumask_scnprintf(buf, ARRAY_SIZE(buf), cpu_possible_mask);
+	pr_info("Possible CPU mask: %s\n", buf);
+
 	/* check with the cores we have worken up */
 	for (ncore = 0, i = 0; i < NLM_NR_NODES; i++)
 		ncore += hweight32(nlm_get_node(i)->coremask);
 
-	pr_info("Phys CPU present map: %lx, possible map %lx\n",
-		(unsigned long)cpumask_bits(&phys_cpu_present_map)[0],
-		(unsigned long)cpumask_bits(cpu_possible_mask)[0]);
-
 	pr_info("Detected (%dc%dt) %d Slave CPU(s)\n", ncore,
 		nlm_threads_per_core, num_cpus);
+
+	/* switch NMI handler to boot CPUs */
 	nlm_set_nmi_handler(nlm_boot_secondary_cpus);
 }
 
diff --git a/arch/mips/netlogic/dts/Makefile b/arch/mips/netlogic/dts/Makefile
index d117d46413aa..aecb6fa9a9c3 100644
--- a/arch/mips/netlogic/dts/Makefile
+++ b/arch/mips/netlogic/dts/Makefile
@@ -1 +1,2 @@
 obj-$(CONFIG_DT_XLP_EVP) := xlp_evp.dtb.o
+obj-$(CONFIG_DT_XLP_SVP) += xlp_svp.dtb.o
diff --git a/arch/mips/netlogic/dts/xlp_evp.dts b/arch/mips/netlogic/dts/xlp_evp.dts
index 7628b5464fc7..e14f42308064 100644
--- a/arch/mips/netlogic/dts/xlp_evp.dts
+++ b/arch/mips/netlogic/dts/xlp_evp.dts
@@ -20,7 +20,7 @@
 		#address-cells = <2>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
-		ranges = <0 0  0 0x18000000  0x04000000	  // PCIe CFG
+		ranges = <0 0  0 0x18000000  0x04000000   // PCIe CFG
 			  1 0  0 0x16000000  0x01000000>; // GBU chipselects
 
 		serial0: serial@30000 {
diff --git a/arch/mips/netlogic/dts/xlp_svp.dts b/arch/mips/netlogic/dts/xlp_svp.dts
new file mode 100644
index 000000000000..8af4bdbe5d99
--- /dev/null
+++ b/arch/mips/netlogic/dts/xlp_svp.dts
@@ -0,0 +1,124 @@
+/*
+ * XLP3XX Device Tree Source for SVP boards
+ */
+
+/dts-v1/;
+/ {
+	model = "netlogic,XLP-SVP";
+	compatible = "netlogic,xlp";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	memory {
+		device_type = "memory";
+		reg =  <0 0x00100000 0 0x0FF00000	// 255M at 1M
+			0 0x20000000 0 0xa0000000	// 2560M at 512M
+			0 0xe0000000 0 0x40000000>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0 0  0 0x18000000  0x04000000   // PCIe CFG
+			  1 0  0 0x16000000  0x01000000>; // GBU chipselects
+
+		serial0: serial@30000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0 0x30100 0xa00>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <133333333>;
+			interrupt-parent = <&pic>;
+			interrupts = <17>;
+		};
+		serial1: serial@31000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0 0x31100 0xa00>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <133333333>;
+			interrupt-parent = <&pic>;
+			interrupts = <18>;
+		};
+		i2c0: ocores@32000 {
+			compatible = "opencores,i2c-ocores";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x32100 0xa00>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <32000000>;
+			interrupt-parent = <&pic>;
+			interrupts = <30>;
+		};
+		i2c1: ocores@33000 {
+			compatible = "opencores,i2c-ocores";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x33100 0xa00>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clock-frequency = <32000000>;
+			interrupt-parent = <&pic>;
+			interrupts = <31>;
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+
+			dtt@4c {
+				compatible = "national,lm90";
+				reg = <0x4c>;
+			};
+		};
+		pic: pic@4000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			reg = <0 0x4000 0x200>;
+		};
+
+		nor_flash@1,0 {
+			compatible = "cfi-flash";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <2>;
+			reg = <1 0 0x1000000>;
+
+			partition@0 {
+				label = "x-loader";
+				reg = <0x0 0x100000>; /* 1M */
+				read-only;
+			};
+
+			partition@100000 {
+				label = "u-boot";
+				reg = <0x100000 0x100000>; /* 1M */
+			};
+
+			partition@200000 {
+				label = "kernel";
+				reg = <0x200000 0x500000>; /* 5M */
+			};
+
+			partition@700000 {
+				label = "rootfs";
+				reg = <0x700000 0x800000>; /* 8M */
+			};
+
+			partition@f00000 {
+				label = "env";
+				reg = <0xf00000 0x100000>; /* 1M */
+				read-only;
+			};
+		};
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
+	};
+};
diff --git a/arch/mips/netlogic/xlp/nlm_hal.c b/arch/mips/netlogic/xlp/nlm_hal.c
index c68fd4026104..87560e4db35f 100644
--- a/arch/mips/netlogic/xlp/nlm_hal.c
+++ b/arch/mips/netlogic/xlp/nlm_hal.c
@@ -61,43 +61,61 @@ void nlm_node_init(int node)
 
 int nlm_irq_to_irt(int irq)
 {
-	if (!PIC_IRQ_IS_IRT(irq))
-		return -1;
+	uint64_t pcibase;
+	int devoff, irt;
 
 	switch (irq) {
 	case PIC_UART_0_IRQ:
-		return PIC_IRT_UART_0_INDEX;
+		devoff = XLP_IO_UART0_OFFSET(0);
+		break;
 	case PIC_UART_1_IRQ:
-		return PIC_IRT_UART_1_INDEX;
-	case PIC_PCIE_LINK_0_IRQ:
-	       return PIC_IRT_PCIE_LINK_0_INDEX;
-	case PIC_PCIE_LINK_1_IRQ:
-	       return PIC_IRT_PCIE_LINK_1_INDEX;
-	case PIC_PCIE_LINK_2_IRQ:
-	       return PIC_IRT_PCIE_LINK_2_INDEX;
-	case PIC_PCIE_LINK_3_IRQ:
-	       return PIC_IRT_PCIE_LINK_3_INDEX;
+		devoff = XLP_IO_UART1_OFFSET(0);
+		break;
 	case PIC_EHCI_0_IRQ:
-	       return PIC_IRT_EHCI_0_INDEX;
+		devoff = XLP_IO_USB_EHCI0_OFFSET(0);
+		break;
 	case PIC_EHCI_1_IRQ:
-	       return PIC_IRT_EHCI_1_INDEX;
+		devoff = XLP_IO_USB_EHCI1_OFFSET(0);
+		break;
 	case PIC_OHCI_0_IRQ:
-	       return PIC_IRT_OHCI_0_INDEX;
+		devoff = XLP_IO_USB_OHCI0_OFFSET(0);
+		break;
 	case PIC_OHCI_1_IRQ:
-	       return PIC_IRT_OHCI_1_INDEX;
+		devoff = XLP_IO_USB_OHCI1_OFFSET(0);
+		break;
 	case PIC_OHCI_2_IRQ:
-	       return PIC_IRT_OHCI_2_INDEX;
+		devoff = XLP_IO_USB_OHCI2_OFFSET(0);
+		break;
 	case PIC_OHCI_3_IRQ:
-	       return PIC_IRT_OHCI_3_INDEX;
+		devoff = XLP_IO_USB_OHCI3_OFFSET(0);
+		break;
 	case PIC_MMC_IRQ:
-	       return PIC_IRT_MMC_INDEX;
+		devoff = XLP_IO_SD_OFFSET(0);
+		break;
 	case PIC_I2C_0_IRQ:
-		return PIC_IRT_I2C_0_INDEX;
+		devoff = XLP_IO_I2C0_OFFSET(0);
+		break;
 	case PIC_I2C_1_IRQ:
-		return PIC_IRT_I2C_1_INDEX;
+		devoff = XLP_IO_I2C1_OFFSET(0);
+		break;
 	default:
-		return -1;
+		devoff = 0;
+		break;
 	}
+
+	if (devoff != 0) {
+		pcibase = nlm_pcicfg_base(devoff);
+		irt = nlm_read_reg(pcibase, XLP_PCI_IRTINFO_REG) & 0xffff;
+		/* HW bug, I2C 1 irt entry is off by one */
+		if (irq == PIC_I2C_1_IRQ)
+			irt = irt + 1;
+	} else if (irq >= PIC_PCIE_LINK_0_IRQ && irq <= PIC_PCIE_LINK_3_IRQ) {
+		/* HW bug, PCI IRT entries are bad on early silicon, fix */
+		irt = PIC_IRT_PCIE_LINK_INDEX(irq - PIC_PCIE_LINK_0_IRQ);
+	} else {
+		irt = -1;
+	}
+	return irt;
 }
 
 unsigned int nlm_get_core_frequency(int node, int core)
diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c
index 4894d62043ac..af319143b591 100644
--- a/arch/mips/netlogic/xlp/setup.c
+++ b/arch/mips/netlogic/xlp/setup.c
@@ -56,7 +56,7 @@ uint64_t nlm_io_base;
 struct nlm_soc_info nlm_nodes[NLM_NR_NODES];
 cpumask_t nlm_cpumask = CPU_MASK_CPU0;
 unsigned int nlm_threads_per_core;
-extern u32 __dtb_start[];
+extern u32 __dtb_xlp_evp_begin[], __dtb_xlp_svp_begin[], __dtb_start[];
 
 static void nlm_linux_exit(void)
 {
@@ -82,8 +82,24 @@ void __init plat_mem_setup(void)
 	 * 64-bit, so convert pointer.
 	 */
 	fdtp = (void *)(long)fw_arg0;
-	if (!fdtp)
-		fdtp = __dtb_start;
+	if (!fdtp) {
+		switch (current_cpu_data.processor_id & 0xff00) {
+#ifdef CONFIG_DT_XLP_SVP
+		case PRID_IMP_NETLOGIC_XLP3XX:
+			fdtp = __dtb_xlp_svp_begin;
+			break;
+#endif
+#ifdef CONFIG_DT_XLP_EVP
+		case PRID_IMP_NETLOGIC_XLP8XX:
+			fdtp = __dtb_xlp_evp_begin;
+			break;
+#endif
+		default:
+			/* Pick a built-in if any, and hope for the best */
+			fdtp = __dtb_start;
+			break;
+		}
+	}
 	fdtp = phys_to_virt(__pa(fdtp));
 	early_init_devtree(fdtp);
 }
diff --git a/arch/mips/netlogic/xlp/usb-init.c b/arch/mips/netlogic/xlp/usb-init.c
index 1d0b66c62fd1..9c401dd78337 100644
--- a/arch/mips/netlogic/xlp/usb-init.c
+++ b/arch/mips/netlogic/xlp/usb-init.c
@@ -42,7 +42,30 @@
 #include <asm/netlogic/haldefs.h>
 #include <asm/netlogic/xlp-hal/iomap.h>
 #include <asm/netlogic/xlp-hal/xlp.h>
-#include <asm/netlogic/xlp-hal/usb.h>
+
+/*
+ * USB glue logic registers, used only during initialization
+ */
+#define USB_CTL_0			0x01
+#define USB_PHY_0			0x0A
+#define USB_PHY_RESET			0x01
+#define USB_PHY_PORT_RESET_0		0x10
+#define USB_PHY_PORT_RESET_1		0x20
+#define USB_CONTROLLER_RESET		0x01
+#define USB_INT_STATUS			0x0E
+#define USB_INT_EN			0x0F
+#define USB_PHY_INTERRUPT_EN		0x01
+#define USB_OHCI_INTERRUPT_EN		0x02
+#define USB_OHCI_INTERRUPT1_EN		0x04
+#define USB_OHCI_INTERRUPT2_EN		0x08
+#define USB_CTRL_INTERRUPT_EN		0x10
+
+#define nlm_read_usb_reg(b, r)			nlm_read_reg(b, r)
+#define nlm_write_usb_reg(b, r, v)		nlm_write_reg(b, r, v)
+#define nlm_get_usb_pcibase(node, inst)		\
+	nlm_pcicfg_base(XLP_IO_USB_OFFSET(node, inst))
+#define nlm_get_usb_regbase(node, inst)		\
+	(nlm_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ)
 
 static void nlm_usb_intr_en(int node, int port)
 {
@@ -99,23 +122,23 @@ static void nlm_usb_fixup_final(struct pci_dev *dev)
 	dev->dev.coherent_dma_mask	= DMA_BIT_MASK(64);
 	switch (dev->devfn) {
 	case 0x10:
-	       dev->irq = PIC_EHCI_0_IRQ;
-	       break;
+		dev->irq = PIC_EHCI_0_IRQ;
+		break;
 	case 0x11:
-	       dev->irq = PIC_OHCI_0_IRQ;
-	       break;
+		dev->irq = PIC_OHCI_0_IRQ;
+		break;
 	case 0x12:
-	       dev->irq = PIC_OHCI_1_IRQ;
-	       break;
+		dev->irq = PIC_OHCI_1_IRQ;
+		break;
 	case 0x13:
-	       dev->irq = PIC_EHCI_1_IRQ;
-	       break;
+		dev->irq = PIC_EHCI_1_IRQ;
+		break;
 	case 0x14:
-	       dev->irq = PIC_OHCI_2_IRQ;
-	       break;
+		dev->irq = PIC_OHCI_2_IRQ;
+		break;
 	case 0x15:
-	       dev->irq = PIC_OHCI_3_IRQ;
-	       break;
+		dev->irq = PIC_OHCI_3_IRQ;
+		break;
 	}
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_EHCI,