Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "The whole series has been sitting in -next for quite a while with no
  complaints.  The last change to the series was before the weekend the
  removal of an SPI patch which Grant - even though previously acked by
  himself - appeared to raise objections.  So I removed it until the
  situation is clarified.  Other than that all the patches have the acks
  from their respective maintainers, all MIPS and x86 defconfigs are
  building fine and I'm not aware of any problems introduced by this
  series.

  Among the key features for this patch series is a sizable patchset for
  Lantiq which among other things introduces support for Lantiq's
  flagship product, the FALCON SOC.  It also means that the opensource
  developers behind this patchset have overtaken Lantiq's competing
  inhouse development team that was working behind closed doors.

  Less noteworthy the ath79 patchset which adds support for a few more
  chip variants, cleanups and fixes.  Finally the usual dose of tweaking
  of generic code."

Fix up trivial conflicts in arch/mips/lantiq/xway/gpio_{ebu,stp}.c where
printk spelling fixes clashed with file move and eventual removal of the
printk.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (81 commits)
  MIPS: lantiq: remove orphaned code
  MIPS: Remove all -Wall and almost all -Werror usage from arch/mips.
  MIPS: lantiq: implement support for FALCON soc
  MTD: MIPS: lantiq: verify that the NOR interface is available on falcon soc
  MTD: MIPS: lantiq: implement OF support
  watchdog: MIPS: lantiq: implement OF support and minor fixes
  SERIAL: MIPS: lantiq: implement OF support
  GPIO: MIPS: lantiq: convert gpio-stp-xway to OF
  GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio
  GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder
  MIPS: pci: convert lantiq driver to OF
  MIPS: lantiq: convert dma to platform driver
  MIPS: lantiq: implement support for clkdev api
  MIPS: lantiq: drop ltq_gpio_request() and gpio_to_irq()
  OF: MIPS: lantiq: implement irq_domain support
  OF: MIPS: lantiq: implement OF support
  MIPS: lantiq: drop mips_machine support
  OF: PCI: const usage needed by MIPS
  MIPS: Cavium: Remove smp_reserve_lock.
  MIPS: Move cache setup to setup_arch().
  ...

1 files changed, 85 insertions, 134 deletions

diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c
index 030c77e7926e..ea453532a33c 100644
--- a/arch/mips/pci/pci-lantiq.c
+++ b/arch/mips/pci/pci-lantiq.c
@@ -13,8 +13,12 @@
 #include <linux/delay.h>
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
-#include <linux/export.h>
-#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
 
 #include <asm/pci.h>
 #include <asm/gpio.h>
@@ -22,17 +26,9 @@
 
 #include <lantiq_soc.h>
 #include <lantiq_irq.h>
-#include <lantiq_platform.h>
 
 #include "pci-lantiq.h"
 
-#define LTQ_PCI_CFG_BASE		0x17000000
-#define LTQ_PCI_CFG_SIZE		0x00008000
-#define LTQ_PCI_MEM_BASE		0x18000000
-#define LTQ_PCI_MEM_SIZE		0x02000000
-#define LTQ_PCI_IO_BASE			0x1AE00000
-#define LTQ_PCI_IO_SIZE			0x00200000
-
 #define PCI_CR_FCI_ADDR_MAP0		0x00C0
 #define PCI_CR_FCI_ADDR_MAP1		0x00C4
 #define PCI_CR_FCI_ADDR_MAP2		0x00C8
@@ -68,79 +64,27 @@
 #define ltq_pci_cfg_w32(x, y)	ltq_w32((x), ltq_pci_mapped_cfg + (y))
 #define ltq_pci_cfg_r32(x)	ltq_r32(ltq_pci_mapped_cfg + (x))
 
-struct ltq_pci_gpio_map {
-	int pin;
-	int alt0;
-	int alt1;
-	int dir;
-	char *name;
-};
-
-/* the pci core can make use of the following gpios */
-static struct ltq_pci_gpio_map ltq_pci_gpio_map[] = {
-	{ 0, 1, 0, 0, "pci-exin0" },
-	{ 1, 1, 0, 0, "pci-exin1" },
-	{ 2, 1, 0, 0, "pci-exin2" },
-	{ 39, 1, 0, 0, "pci-exin3" },
-	{ 10, 1, 0, 0, "pci-exin4" },
-	{ 9, 1, 0, 0, "pci-exin5" },
-	{ 30, 1, 0, 1, "pci-gnt1" },
-	{ 23, 1, 0, 1, "pci-gnt2" },
-	{ 19, 1, 0, 1, "pci-gnt3" },
-	{ 38, 1, 0, 1, "pci-gnt4" },
-	{ 29, 1, 0, 0, "pci-req1" },
-	{ 31, 1, 0, 0, "pci-req2" },
-	{ 3, 1, 0, 0, "pci-req3" },
-	{ 37, 1, 0, 0, "pci-req4" },
-};
-
 __iomem void *ltq_pci_mapped_cfg;
 static __iomem void *ltq_pci_membase;
 
-int (*ltqpci_plat_dev_init)(struct pci_dev *dev) = NULL;
-
-/* Since the PCI REQ pins can be reused for other functionality, make it
-   possible to exclude those from interpretation by the PCI controller */
-static int ltq_pci_req_mask = 0xf;
-
-static int *ltq_pci_irq_map;
-
-struct pci_ops ltq_pci_ops = {
+static int reset_gpio;
+static struct clk *clk_pci, *clk_external;
+static struct resource pci_io_resource;
+static struct resource pci_mem_resource;
+static struct pci_ops pci_ops = {
 	.read	= ltq_pci_read_config_dword,
 	.write	= ltq_pci_write_config_dword
 };
 
-static struct resource pci_io_resource = {
-	.name	= "pci io space",
-	.start	= LTQ_PCI_IO_BASE,
-	.end	= LTQ_PCI_IO_BASE + LTQ_PCI_IO_SIZE - 1,
-	.flags	= IORESOURCE_IO
-};
-
-static struct resource pci_mem_resource = {
-	.name	= "pci memory space",
-	.start	= LTQ_PCI_MEM_BASE,
-	.end	= LTQ_PCI_MEM_BASE + LTQ_PCI_MEM_SIZE - 1,
-	.flags	= IORESOURCE_MEM
-};
-
-static struct pci_controller ltq_pci_controller = {
-	.pci_ops	= &ltq_pci_ops,
+static struct pci_controller pci_controller = {
+	.pci_ops	= &pci_ops,
 	.mem_resource	= &pci_mem_resource,
 	.mem_offset	= 0x00000000UL,
 	.io_resource	= &pci_io_resource,
 	.io_offset	= 0x00000000UL,
 };
 
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	if (ltqpci_plat_dev_init)
-		return ltqpci_plat_dev_init(dev);
-
-	return 0;
-}
-
-static u32 ltq_calc_bar11mask(void)
+static inline u32 ltq_calc_bar11mask(void)
 {
 	u32 mem, bar11mask;
 
@@ -151,48 +95,42 @@ static u32 ltq_calc_bar11mask(void)
 	return bar11mask;
 }
 
-static void ltq_pci_setup_gpio(int gpio)
-{
-	int i;
-	for (i = 0; i < ARRAY_SIZE(ltq_pci_gpio_map); i++) {
-		if (gpio & (1 << i)) {
-			ltq_gpio_request(ltq_pci_gpio_map[i].pin,
-				ltq_pci_gpio_map[i].alt0,
-				ltq_pci_gpio_map[i].alt1,
-				ltq_pci_gpio_map[i].dir,
-				ltq_pci_gpio_map[i].name);
-		}
-	}
-	ltq_gpio_request(21, 0, 0, 1, "pci-reset");
-	ltq_pci_req_mask = (gpio >> PCI_REQ_SHIFT) & PCI_REQ_MASK;
-}
-
-static int __devinit ltq_pci_startup(struct ltq_pci_data *conf)
+static int __devinit ltq_pci_startup(struct platform_device *pdev)
 {
+	struct device_node *node = pdev->dev.of_node;
+	const __be32 *req_mask, *bus_clk;
 	u32 temp_buffer;
 
-	/* set clock to 33Mhz */
-	if (ltq_is_ar9()) {
-		ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~0x1f00000, LTQ_CGU_IFCCR);
-		ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | 0xe00000, LTQ_CGU_IFCCR);
-	} else {
-		ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~0xf00000, LTQ_CGU_IFCCR);
-		ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | 0x800000, LTQ_CGU_IFCCR);
+	/* get our clocks */
+	clk_pci = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk_pci)) {
+		dev_err(&pdev->dev, "failed to get pci clock\n");
+		return PTR_ERR(clk_pci);
 	}
 
-	/* external or internal clock ? */
-	if (conf->clock) {
-		ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) & ~(1 << 16),
-			LTQ_CGU_IFCCR);
-		ltq_cgu_w32((1 << 30), LTQ_CGU_PCICR);
-	} else {
-		ltq_cgu_w32(ltq_cgu_r32(LTQ_CGU_IFCCR) | (1 << 16),
-			LTQ_CGU_IFCCR);
-		ltq_cgu_w32((1 << 31) | (1 << 30), LTQ_CGU_PCICR);
+	clk_external = clk_get(&pdev->dev, "external");
+	if (IS_ERR(clk_external)) {
+		clk_put(clk_pci);
+		dev_err(&pdev->dev, "failed to get external pci clock\n");
+		return PTR_ERR(clk_external);
 	}
 
-	/* setup pci clock and gpis used by pci */
-	ltq_pci_setup_gpio(conf->gpio);
+	/* read the bus speed that we want */
+	bus_clk = of_get_property(node, "lantiq,bus-clock", NULL);
+	if (bus_clk)
+		clk_set_rate(clk_pci, *bus_clk);
+
+	/* and enable the clocks */
+	clk_enable(clk_pci);
+	if (of_find_property(node, "lantiq,external-clock", NULL))
+		clk_enable(clk_external);
+	else
+		clk_disable(clk_external);
+
+	/* setup reset gpio used by pci */
+	reset_gpio = of_get_named_gpio(node, "gpio-reset", 0);
+	if (reset_gpio > 0)
+		devm_gpio_request(&pdev->dev, reset_gpio, "pci-reset");
 
 	/* enable auto-switching between PCI and EBU */
 	ltq_pci_w32(0xa, PCI_CR_CLK_CTRL);
@@ -205,7 +143,12 @@ static int __devinit ltq_pci_startup(struct ltq_pci_data *conf)
 
 	/* enable external 2 PCI masters */
 	temp_buffer = ltq_pci_r32(PCI_CR_PC_ARB);
-	temp_buffer &= (~(ltq_pci_req_mask << 16));
+	/* setup the request mask */
+	req_mask = of_get_property(node, "req-mask", NULL);
+	if (req_mask)
+		temp_buffer &= ~((*req_mask & 0xf) << 16);
+	else
+		temp_buffer &= ~0xf0000;
 	/* enable internal arbiter */
 	temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT);
 	/* enable internal PCI master reqest */
@@ -249,47 +192,55 @@ static int __devinit ltq_pci_startup(struct ltq_pci_data *conf)
 	ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN);
 
 	/* toggle reset pin */
-	__gpio_set_value(21, 0);
-	wmb();
-	mdelay(1);
-	__gpio_set_value(21, 1);
-	return 0;
-}
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (ltq_pci_irq_map[slot])
-		return ltq_pci_irq_map[slot];
-	printk(KERN_ERR "lq_pci: trying to map irq for unknown slot %d\n",
-		slot);
-
+	if (reset_gpio > 0) {
+		__gpio_set_value(reset_gpio, 0);
+		wmb();
+		mdelay(1);
+		__gpio_set_value(reset_gpio, 1);
+	}
 	return 0;
 }
 
 static int __devinit ltq_pci_probe(struct platform_device *pdev)
 {
-	struct ltq_pci_data *ltq_pci_data =
-		(struct ltq_pci_data *) pdev->dev.platform_data;
+	struct resource *res_cfg, *res_bridge;
 
 	pci_clear_flags(PCI_PROBE_ONLY);
-	ltq_pci_irq_map = ltq_pci_data->irq;
-	ltq_pci_membase = ioremap_nocache(PCI_CR_BASE_ADDR, PCI_CR_SIZE);
-	ltq_pci_mapped_cfg =
-		ioremap_nocache(LTQ_PCI_CFG_BASE, LTQ_PCI_CFG_BASE);
-	ltq_pci_controller.io_map_base =
-		(unsigned long)ioremap(LTQ_PCI_IO_BASE, LTQ_PCI_IO_SIZE - 1);
-	ltq_pci_startup(ltq_pci_data);
-	register_pci_controller(&ltq_pci_controller);
 
+	res_cfg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	res_bridge = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res_cfg || !res_bridge) {
+		dev_err(&pdev->dev, "missing memory reources\n");
+		return -EINVAL;
+	}
+
+	ltq_pci_membase = devm_request_and_ioremap(&pdev->dev, res_bridge);
+	ltq_pci_mapped_cfg = devm_request_and_ioremap(&pdev->dev, res_cfg);
+
+	if (!ltq_pci_membase || !ltq_pci_mapped_cfg) {
+		dev_err(&pdev->dev, "failed to remap resources\n");
+		return -ENOMEM;
+	}
+
+	ltq_pci_startup(pdev);
+
+	pci_load_of_ranges(&pci_controller, pdev->dev.of_node);
+	register_pci_controller(&pci_controller);
 	return 0;
 }
 
-static struct platform_driver
-ltq_pci_driver = {
+static const struct of_device_id ltq_pci_match[] = {
+	{ .compatible = "lantiq,pci-xway" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ltq_pci_match);
+
+static struct platform_driver ltq_pci_driver = {
 	.probe = ltq_pci_probe,
 	.driver = {
-		.name = "ltq_pci",
+		.name = "pci-xway",
 		.owner = THIS_MODULE,
+		.of_match_table = ltq_pci_match,
 	},
 };
 
@@ -297,7 +248,7 @@ int __init pcibios_init(void)
 {
 	int ret = platform_driver_register(&ltq_pci_driver);
 	if (ret)
-		printk(KERN_INFO "ltq_pci: Error registering platfom driver!");
+		pr_info("pci-xway: Error registering platform driver!");
 	return ret;
 }