BCM1480 HT support

    
PCI support code for PLX 7250 PCI-X tunnel on BCM91480B BigSur board.
    
Signed-Off-By: Andy Isaacson <adi@broadcom.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

4 files changed, 247 insertions, 17 deletions

diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index cd697f6c9984..7b7468304022 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -46,7 +46,7 @@ obj-$(CONFIG_PMC_YOSEMITE)	+= fixup-yosemite.o ops-titan.o ops-titan-ht.o \
 obj-$(CONFIG_SGI_IP27)		+= pci-ip27.o
 obj-$(CONFIG_SGI_IP32)		+= fixup-ip32.o ops-mace.o pci-ip32.o
 obj-$(CONFIG_SIBYTE_SB1250)	+= fixup-sb1250.o pci-sb1250.o
-obj-$(CONFIG_SIBYTE_BCM1x80)	+= pci-bcm1480.o
+obj-$(CONFIG_SIBYTE_BCM1x80)	+= pci-bcm1480.o pci-bcm1480ht.o
 obj-$(CONFIG_SNI_RM200_PCI)	+= fixup-sni.o ops-sni.o
 obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
 obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c
index 12bb74454137..4905d8593d6d 100644
--- a/arch/mips/pci/pci-bcm1480.c
+++ b/arch/mips/pci/pci-bcm1480.c
@@ -56,13 +56,11 @@
 static void *cfg_space;
 
 #define PCI_BUS_ENABLED	1
-#define LDT_BUS_ENABLED	2
-#define PCI_DEVICE_MODE	4
+#define PCI_DEVICE_MODE	2
 
 static int bcm1480_bus_status = 0;
 
 #define PCI_BRIDGE_DEVICE  0
-#define LDT_BRIDGE_DEVICE  1
 
 /*
  * Read/write 32-bit values in config space.
@@ -95,10 +93,13 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
  */
 static int bcm1480_pci_can_access(struct pci_bus *bus, int devfn)
 {
+	u32 devno;
+
 	if (!(bcm1480_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE)))
 		return 0;
 
 	if (bus->number == 0) {
+		devno = PCI_SLOT(devfn);
  		if (bcm1480_bus_status & PCI_DEVICE_MODE)
 			return 0;
 		else
@@ -175,15 +176,15 @@ struct pci_ops bcm1480_pci_ops = {
 
 static struct resource bcm1480_mem_resource = {
 	.name	= "BCM1480 PCI MEM",
-	.start	= 0x40000000UL,
-	.end	= 0x5fffffffUL,
+	.start	= 0x30000000UL,
+	.end	= 0x3fffffffUL,
 	.flags	= IORESOURCE_MEM,
 };
 
 static struct resource bcm1480_io_resource = {
 	.name	= "BCM1480 PCI I/O",
-	.start	= 0x00000000UL,
-	.end	= 0x01ffffffUL,
+	.start	= 0x2c000000UL,
+	.end	= 0x2dffffffUL,
 	.flags	= IORESOURCE_IO,
 };
 
@@ -207,9 +208,9 @@ static int __init bcm1480_pcibios_init(void)
 	PCIBIOS_MIN_IO = 0x00008000UL;
 	PCIBIOS_MIN_MEM = 0x01000000UL;
 
-	/* Set I/O resource limits.  */
-	ioport_resource.end = 0x01ffffffUL;	/* 32MB accessible by bcm1480 */
-	iomem_resource.end = 0xffffffffUL;	/* no HT support yet */
+	/* Set I/O resource limits. - unlimited for now to accomodate HT */
+	ioport_resource.end = 0xffffffffUL;
+	iomem_resource.end = 0xffffffffUL;
 
 	cfg_space = ioremap(A_BCM1480_PHYS_PCI_CFG_MATCH_BITS, 16*1024*1024);
 
diff --git a/arch/mips/pci/pci-bcm1480ht.c b/arch/mips/pci/pci-bcm1480ht.c
new file mode 100644
index 000000000000..aca4a2e7a1c6
--- /dev/null
+++ b/arch/mips/pci/pci-bcm1480ht.c
@@ -0,0 +1,224 @@
+/*
+ * Copyright (C) 2001,2002,2005 Broadcom Corporation
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+/*
+ * BCM1480/1455-specific HT support (looking like PCI)
+ *
+ * This module provides the glue between Linux's PCI subsystem
+ * and the hardware.  We basically provide glue for accessing
+ * configuration space, and set up the translation for I/O
+ * space accesses.
+ *
+ * To access configuration space, we use ioremap.  In the 32-bit
+ * kernel, this consumes either 4 or 8 page table pages, and 16MB of
+ * kernel mapped memory.  Hopefully neither of these should be a huge
+ * problem.
+ *
+ */
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_scd.h>
+#include <asm/sibyte/board.h>
+#include <asm/io.h>
+
+/*
+ * Macros for calculating offsets into config space given a device
+ * structure or dev/fun/reg
+ */
+#define CFGOFFSET(bus,devfn,where) (((bus)<<16)+((devfn)<<8)+(where))
+#define CFGADDR(bus,devfn,where)   CFGOFFSET((bus)->number,(devfn),where)
+
+static void *ht_cfg_space;
+
+#define PCI_BUS_ENABLED	1
+#define PCI_DEVICE_MODE	2
+
+static int bcm1480ht_bus_status = 0;
+
+#define PCI_BRIDGE_DEVICE  0
+#define HT_BRIDGE_DEVICE   1
+
+/*
+ * HT's level-sensitive interrupts require EOI, which is generated
+ * through a 4MB memory-mapped region
+ */
+unsigned long ht_eoi_space;
+
+/*
+ * Read/write 32-bit values in config space.
+ */
+static inline u32 READCFG32(u32 addr)
+{
+	return *(u32 *)(ht_cfg_space + (addr&~3));
+}
+
+static inline void WRITECFG32(u32 addr, u32 data)
+{
+	*(u32 *)(ht_cfg_space + (addr & ~3)) = data;
+}
+
+/*
+ * Some checks before doing config cycles:
+ * In PCI Device Mode, hide everything on bus 0 except the LDT host
+ * bridge.  Otherwise, access is controlled by bridge MasterEn bits.
+ */
+static int bcm1480ht_can_access(struct pci_bus *bus, int devfn)
+{
+	u32 devno;
+
+	if (!(bcm1480ht_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE)))
+		return 0;
+
+	if (bus->number == 0) {
+		devno = PCI_SLOT(devfn);
+ 		if (bcm1480ht_bus_status & PCI_DEVICE_MODE)
+			return 0;
+	}
+	return 1;
+}
+
+/*
+ * Read/write access functions for various sizes of values
+ * in config space.  Return all 1's for disallowed accesses
+ * for a kludgy but adequate simulation of master aborts.
+ */
+
+static int bcm1480ht_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+				  int where, int size, u32 * val)
+{
+	u32 data = 0;
+
+	if ((size == 2) && (where & 1))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	else if ((size == 4) && (where & 3))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	if (bcm1480ht_can_access(bus, devfn))
+		data = READCFG32(CFGADDR(bus, devfn, where));
+	else
+		data = 0xFFFFFFFF;
+
+	if (size == 1)
+		*val = (data >> ((where & 3) << 3)) & 0xff;
+	else if (size == 2)
+		*val = (data >> ((where & 3) << 3)) & 0xffff;
+	else
+		*val = data;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm1480ht_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+				   int where, int size, u32 val)
+{
+	u32 cfgaddr = CFGADDR(bus, devfn, where);
+	u32 data = 0;
+
+	if ((size == 2) && (where & 1))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+	else if ((size == 4) && (where & 3))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	if (!bcm1480ht_can_access(bus, devfn))
+		return PCIBIOS_BAD_REGISTER_NUMBER;
+
+	data = READCFG32(cfgaddr);
+
+	if (size == 1)
+		data = (data & ~(0xff << ((where & 3) << 3))) |
+		    (val << ((where & 3) << 3));
+	else if (size == 2)
+		data = (data & ~(0xffff << ((where & 3) << 3))) |
+		    (val << ((where & 3) << 3));
+	else
+		data = val;
+
+	WRITECFG32(cfgaddr, data);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm1480ht_pcibios_get_busno(void)
+{
+	return 0;
+}
+
+struct pci_ops bcm1480ht_pci_ops = {
+	.read	= bcm1480ht_pcibios_read,
+	.write	= bcm1480ht_pcibios_write,
+};
+
+static struct resource bcm1480ht_mem_resource = {
+	.name	= "BCM1480 HT MEM",
+	.start	= 0x40000000UL,
+	.end	= 0x5fffffffUL,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct resource bcm1480ht_io_resource = {
+	.name	= "BCM1480 HT I/O",
+	.start	= 0x00000000UL,
+	.end	= 0x01ffffffUL,
+	.flags	= IORESOURCE_IO,
+};
+
+struct pci_controller bcm1480ht_controller = {
+	.pci_ops	= &bcm1480ht_pci_ops,
+	.mem_resource	= &bcm1480ht_mem_resource,
+	.io_resource	= &bcm1480ht_io_resource,
+	.index		= 1,
+	.get_busno	= bcm1480ht_pcibios_get_busno,
+};
+
+static int __init bcm1480ht_pcibios_init(void)
+{
+	uint32_t cmdreg;
+
+	ht_cfg_space = ioremap(A_BCM1480_PHYS_HT_CFG_MATCH_BITS, 16*1024*1024);
+
+	/*
+	 * See if the PCI bus has been configured by the firmware.
+	 */
+	cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0),
+				     PCI_COMMAND));
+	if (!(cmdreg & PCI_COMMAND_MASTER)) {
+		printk("HT: Skipping HT probe. Bus is not initialized.\n");
+		iounmap(ht_cfg_space);
+		return 1; /* XXX */
+	}
+	bcm1480ht_bus_status |= PCI_BUS_ENABLED;
+
+	ht_eoi_space = (unsigned long)
+		ioremap(A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES,
+			4 * 1024 * 1024);
+
+	register_pci_controller(&bcm1480ht_controller);
+
+	return 0;
+}
+
+arch_initcall(bcm1480ht_pcibios_init);
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 170c6650f961..21402ffd7c98 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -127,15 +127,20 @@ static int __init pcibios_init(void)
 		if (!hose->iommu)
 			PCI_DMA_BUS_IS_PHYS = 1;
 
+		if (hose->get_busno && pci_probe_only)
+			next_busno = (*hose->get_busno)();
+
 		bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
 		hose->bus = bus;
 		hose->need_domain_info = need_domain_info;
-		next_busno = bus->subordinate + 1;
-		/* Don't allow 8-bit bus number overflow inside the hose -
-		   reserve some space for bridges. */
-		if (next_busno > 224) {
-			next_busno = 0;
-			need_domain_info = 1;
+		if (bus) {
+			next_busno = bus->subordinate + 1;
+			/* Don't allow 8-bit bus number overflow inside the hose -
+			   reserve some space for bridges. */
+			if (next_busno > 224) {
+				next_busno = 0;
+				need_domain_info = 1;
+			}
 		}
 		continue;