Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 - three fixes for 3.15 that didn't make it in time
 - limited Octeon 3 support.
 - paravirtualization support
 - improvment to platform support for Netlogix SOCs.
 - add support for powering down the Malta eval board in software
 - add many instructions to the in-kernel microassembler.
 - add support for the BPF JIT.
 - minor cleanups of the BCM47xx code.
 - large cleanup of math emu code resulting in significant code size
   reduction, better readability of the code and more accurate
   emulation.
 - improvments to the MIPS CPS code.
 - support C3 power status for the R4k count/compare clock device.
 - improvments to the GIO support for older SGI workstations.
 - increase number of supported CPUs to 256; this can be reached on
   certain embedded multithreaded ccNUMA configurations.
 - various small cleanups, updates and fixes

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (173 commits)
  MIPS: IP22/IP28: Improve GIO support
  MIPS: Octeon: Add twsi interrupt initialization for OCTEON 3XXX, 5XXX, 63XX
  DEC: Document the R4k MB ASIC mini interrupt controller
  DEC: Add self as the maintainer
  MIPS: Add microMIPS MSA support.
  MIPS: Replace calls to obsolete strict_strto call with kstrto* equivalents.
  MIPS: Replace obsolete strict_strto call with kstrto
  MIPS: BFP: Simplify code slightly.
  MIPS: Call find_vma with the mmap_sem held
  MIPS: Fix 'write_msa_##' inline macro.
  MIPS: Fix MSA toolchain support detection.
  mips: Update the email address of Geert Uytterhoeven
  MIPS: Add minimal defconfig for mips_paravirt
  MIPS: Enable build for new system 'paravirt'
  MIPS: paravirt: Add pci controller for virtio
  MIPS: Add code for new system 'paravirt'
  MIPS: Add functions for hypervisor call
  MIPS: OCTEON: Add OCTEON3 to __get_cpu_type
  MIPS: Add function get_ebase_cpunum
  MIPS: Add minimal support for OCTEON3 to c-r4k.c
  ...

8 files changed, 287 insertions, 55 deletions

diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index d61138a177cc..ff8a5539b363 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -21,7 +21,7 @@ obj-$(CONFIG_BCM63XX)		+= pci-bcm63xx.o fixup-bcm63xx.o \
 obj-$(CONFIG_MIPS_ALCHEMY)	+= pci-alchemy.o
 obj-$(CONFIG_SOC_AR71XX)	+= pci-ar71xx.o
 obj-$(CONFIG_PCI_AR724X)	+= pci-ar724x.o
-
+obj-$(CONFIG_MIPS_PCI_VIRTIO)	+= pci-virtio-guest.o
 #
 # These are still pretty much in the old state, watch, go blind.
 #
diff --git a/arch/mips/pci/fixup-malta.c b/arch/mips/pci/fixup-malta.c
index 2f9e52a1a750..40e920c653cc 100644
--- a/arch/mips/pci/fixup-malta.c
+++ b/arch/mips/pci/fixup-malta.c
@@ -68,6 +68,7 @@ static void malta_piix_func0_fixup(struct pci_dev *pdev)
 {
 	unsigned char reg_val;
 	u32 reg_val32;
+	u16 reg_val16;
 	/* PIIX PIRQC[A:D] irq mappings */
 	static int piixirqmap[PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_MAX] = {
 		0,  0,	0,  3,
@@ -107,6 +108,11 @@ static void malta_piix_func0_fixup(struct pci_dev *pdev)
 	pci_read_config_byte(pdev, PIIX4_FUNC0_SERIRQC, &reg_val);
 	reg_val |= PIIX4_FUNC0_SERIRQC_EN | PIIX4_FUNC0_SERIRQC_CONT;
 	pci_write_config_byte(pdev, PIIX4_FUNC0_SERIRQC, reg_val);
+
+	/* Enable response to special cycles */
+	pci_read_config_word(pdev, PCI_COMMAND, &reg_val16);
+	pci_write_config_word(pdev, PCI_COMMAND,
+			      reg_val16 | PCI_COMMAND_SPECIAL);
 }
 
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0,
diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
index 2b91b0e61566..ab0c5d14c6f7 100644
--- a/arch/mips/pci/msi-octeon.c
+++ b/arch/mips/pci/msi-octeon.c
@@ -15,6 +15,7 @@
 #include <asm/octeon/cvmx-npi-defs.h>
 #include <asm/octeon/cvmx-pci-defs.h>
 #include <asm/octeon/cvmx-npei-defs.h>
+#include <asm/octeon/cvmx-sli-defs.h>
 #include <asm/octeon/cvmx-pexp-defs.h>
 #include <asm/octeon/pci-octeon.h>
 
@@ -162,6 +163,11 @@ msi_irq_allocated:
 		msg.address_lo = (0 + CVMX_NPEI_PCIE_MSI_RCV) & 0xffffffff;
 		msg.address_hi = (0 + CVMX_NPEI_PCIE_MSI_RCV) >> 32;
 		break;
+	case OCTEON_DMA_BAR_TYPE_PCIE2:
+		/* When using PCIe2, Bar 0 is based at 0 */
+		msg.address_lo = (0 + CVMX_SLI_PCIE_MSI_RCV) & 0xffffffff;
+		msg.address_hi = (0 + CVMX_SLI_PCIE_MSI_RCV) >> 32;
+		break;
 	default:
 		panic("arch_setup_msi_irq: Invalid octeon_dma_bar_type");
 	}
diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
index 3249685e03ad..fa374fe3746b 100644
--- a/arch/mips/pci/msi-xlp.c
+++ b/arch/mips/pci/msi-xlp.c
@@ -56,8 +56,8 @@
 #include <asm/netlogic/xlp-hal/bridge.h>
 
 #define XLP_MSIVEC_PER_LINK	32
-#define XLP_MSIXVEC_TOTAL	32
-#define XLP_MSIXVEC_PER_LINK	8
+#define XLP_MSIXVEC_TOTAL	(cpu_is_xlp9xx() ? 128 : 32)
+#define XLP_MSIXVEC_PER_LINK	(cpu_is_xlp9xx() ? 32 : 8)
 
 /* 128 MSI irqs per node, mapped starting at NLM_MSI_VEC_BASE */
 static inline int nlm_link_msiirq(int link, int msivec)
@@ -65,35 +65,44 @@ static inline int nlm_link_msiirq(int link, int msivec)
 	return NLM_MSI_VEC_BASE + link * XLP_MSIVEC_PER_LINK + msivec;
 }
 
+/* get the link MSI vector from irq number */
 static inline int nlm_irq_msivec(int irq)
 {
-	return irq % XLP_MSIVEC_PER_LINK;
+	return (irq - NLM_MSI_VEC_BASE) % XLP_MSIVEC_PER_LINK;
 }
 
+/* get the link from the irq number */
 static inline int nlm_irq_msilink(int irq)
 {
-	return (irq % (XLP_MSIVEC_PER_LINK * PCIE_NLINKS)) /
-						XLP_MSIVEC_PER_LINK;
+	int total_msivec = XLP_MSIVEC_PER_LINK * PCIE_NLINKS;
+
+	return ((irq - NLM_MSI_VEC_BASE) % total_msivec) /
+		XLP_MSIVEC_PER_LINK;
 }
 
 /*
- * Only 32 MSI-X vectors are possible because there are only 32 PIC
- * interrupts for MSI. We split them statically and use 8 MSI-X vectors
- * per link - this keeps the allocation and lookup simple.
+ * For XLP 8xx/4xx/3xx/2xx, only 32 MSI-X vectors are possible because
+ * there are only 32 PIC interrupts for MSI. We split them statically
+ * and use 8 MSI-X vectors per link - this keeps the allocation and
+ * lookup simple.
+ * On XLP 9xx, there are 32 vectors per link, and the interrupts are
+ * not routed thru PIC, so we can use all 128 MSI-X vectors.
  */
 static inline int nlm_link_msixirq(int link, int bit)
 {
 	return NLM_MSIX_VEC_BASE + link * XLP_MSIXVEC_PER_LINK + bit;
 }
 
+/* get the link MSI vector from irq number */
 static inline int nlm_irq_msixvec(int irq)
 {
-	return irq % XLP_MSIXVEC_TOTAL;  /* works when given xirq */
+	return (irq - NLM_MSIX_VEC_BASE) % XLP_MSIXVEC_TOTAL;
 }
 
-static inline int nlm_irq_msixlink(int irq)
+/* get the link from MSIX vec */
+static inline int nlm_irq_msixlink(int msixvec)
 {
-	return nlm_irq_msixvec(irq) / XLP_MSIXVEC_PER_LINK;
+	return msixvec / XLP_MSIXVEC_PER_LINK;
 }
 
 /*
@@ -129,7 +138,11 @@ static void xlp_msi_enable(struct irq_data *d)
 	vec = nlm_irq_msivec(d->irq);
 	spin_lock_irqsave(&md->msi_lock, flags);
 	md->msi_enabled_mask |= 1u << vec;
-	nlm_write_reg(md->lnkbase, PCIE_MSI_EN, md->msi_enabled_mask);
+	if (cpu_is_xlp9xx())
+		nlm_write_reg(md->lnkbase, PCIE_9XX_MSI_EN,
+				md->msi_enabled_mask);
+	else
+		nlm_write_reg(md->lnkbase, PCIE_MSI_EN, md->msi_enabled_mask);
 	spin_unlock_irqrestore(&md->msi_lock, flags);
 }
 
@@ -142,7 +155,11 @@ static void xlp_msi_disable(struct irq_data *d)
 	vec = nlm_irq_msivec(d->irq);
 	spin_lock_irqsave(&md->msi_lock, flags);
 	md->msi_enabled_mask &= ~(1u << vec);
-	nlm_write_reg(md->lnkbase, PCIE_MSI_EN, md->msi_enabled_mask);
+	if (cpu_is_xlp9xx())
+		nlm_write_reg(md->lnkbase, PCIE_9XX_MSI_EN,
+				md->msi_enabled_mask);
+	else
+		nlm_write_reg(md->lnkbase, PCIE_MSI_EN, md->msi_enabled_mask);
 	spin_unlock_irqrestore(&md->msi_lock, flags);
 }
 
@@ -156,11 +173,18 @@ static void xlp_msi_mask_ack(struct irq_data *d)
 	xlp_msi_disable(d);
 
 	/* Ack MSI on bridge */
-	nlm_write_reg(md->lnkbase, PCIE_MSI_STATUS, 1u << vec);
+	if (cpu_is_xlp9xx())
+		nlm_write_reg(md->lnkbase, PCIE_9XX_MSI_STATUS, 1u << vec);
+	else
+		nlm_write_reg(md->lnkbase, PCIE_MSI_STATUS, 1u << vec);
 
 	/* Ack at eirr and PIC */
 	ack_c0_eirr(PIC_PCIE_LINK_MSI_IRQ(link));
-	nlm_pic_ack(md->node->picbase, PIC_IRT_PCIE_LINK_INDEX(link));
+	if (cpu_is_xlp9xx())
+		nlm_pic_ack(md->node->picbase,
+				PIC_9XX_IRT_PCIE_LINK_INDEX(link));
+	else
+		nlm_pic_ack(md->node->picbase, PIC_IRT_PCIE_LINK_INDEX(link));
 }
 
 static struct irq_chip xlp_msi_chip = {
@@ -172,30 +196,45 @@ static struct irq_chip xlp_msi_chip = {
 };
 
 /*
- * The MSI-X interrupt handling is different from MSI, there are 32
- * MSI-X interrupts generated by the PIC and each of these correspond
- * to a MSI-X vector (0-31) that can be assigned.
+ * XLP8XX/4XX/3XX/2XX:
+ * The MSI-X interrupt handling is different from MSI, there are 32 MSI-X
+ * interrupts generated by the PIC and each of these correspond to a MSI-X
+ * vector (0-31) that can be assigned.
  *
- * We divide the MSI-X vectors to 8 per link and do a per-link
- * allocation
+ * We divide the MSI-X vectors to 8 per link and do a per-link allocation
+ *
+ * XLP9XX:
+ * 32 MSI-X vectors are available per link, and the interrupts are not routed
+ * thru the PIC. PIC ack not needed.
  *
  * Enable and disable done using standard MSI functions.
  */
 static void xlp_msix_mask_ack(struct irq_data *d)
 {
-	struct xlp_msi_data *md = irq_data_get_irq_handler_data(d);
+	struct xlp_msi_data *md;
 	int link, msixvec;
+	uint32_t status_reg, bit;
 
 	msixvec = nlm_irq_msixvec(d->irq);
-	link = nlm_irq_msixlink(d->irq);
+	link = nlm_irq_msixlink(msixvec);
 	mask_msi_irq(d);
+	md = irq_data_get_irq_handler_data(d);
 
 	/* Ack MSI on bridge */
-	nlm_write_reg(md->lnkbase, PCIE_MSIX_STATUS, 1u << msixvec);
+	if (cpu_is_xlp9xx()) {
+		status_reg = PCIE_9XX_MSIX_STATUSX(link);
+		bit = msixvec % XLP_MSIXVEC_PER_LINK;
+	} else {
+		status_reg = PCIE_MSIX_STATUS;
+		bit = msixvec;
+	}
+	nlm_write_reg(md->lnkbase, status_reg, 1u << bit);
 
 	/* Ack at eirr and PIC */
 	ack_c0_eirr(PIC_PCIE_MSIX_IRQ(link));
-	nlm_pic_ack(md->node->picbase, PIC_IRT_PCIE_MSIX_INDEX(msixvec));
+	if (!cpu_is_xlp9xx())
+		nlm_pic_ack(md->node->picbase,
+				PIC_IRT_PCIE_MSIX_INDEX(msixvec));
 }
 
 static struct irq_chip xlp_msix_chip = {
@@ -219,10 +258,18 @@ static void xlp_config_link_msi(uint64_t lnkbase, int lirq, uint64_t msiaddr)
 {
 	u32 val;
 
-	val = nlm_read_reg(lnkbase, PCIE_INT_EN0);
-	if ((val & 0x200) == 0) {
-		val |= 0x200;		/* MSI Interrupt enable */
-		nlm_write_reg(lnkbase, PCIE_INT_EN0, val);
+	if (cpu_is_xlp9xx()) {
+		val = nlm_read_reg(lnkbase, PCIE_9XX_INT_EN0);
+		if ((val & 0x200) == 0) {
+			val |= 0x200;		/* MSI Interrupt enable */
+			nlm_write_reg(lnkbase, PCIE_9XX_INT_EN0, val);
+		}
+	} else {
+		val = nlm_read_reg(lnkbase, PCIE_INT_EN0);
+		if ((val & 0x200) == 0) {
+			val |= 0x200;
+			nlm_write_reg(lnkbase, PCIE_INT_EN0, val);
+		}
 	}
 
 	val = nlm_read_reg(lnkbase, 0x1);	/* CMD */
@@ -269,9 +316,12 @@ static int xlp_setup_msi(uint64_t lnkbase, int node, int link,
 
 	spin_lock_irqsave(&md->msi_lock, flags);
 	if (md->msi_alloc_mask == 0) {
-		/* switch the link IRQ to MSI range */
 		xlp_config_link_msi(lnkbase, lirq, msiaddr);
-		irt = PIC_IRT_PCIE_LINK_INDEX(link);
+		/* switch the link IRQ to MSI range */
+		if (cpu_is_xlp9xx())
+			irt = PIC_9XX_IRT_PCIE_LINK_INDEX(link);
+		else
+			irt = PIC_IRT_PCIE_LINK_INDEX(link);
 		nlm_setup_pic_irq(node, lirq, lirq, irt);
 		nlm_pic_init_irt(nlm_get_node(node)->picbase, irt, lirq,
 				 node * nlm_threads_per_node(), 1 /*en */);
@@ -311,10 +361,19 @@ static void xlp_config_link_msix(uint64_t lnkbase, int lirq, uint64_t msixaddr)
 		val |= 0x80000000U;
 		nlm_write_reg(lnkbase, 0x2C, val);
 	}
-	val = nlm_read_reg(lnkbase, PCIE_INT_EN0);
-	if ((val & 0x200) == 0) {
-		val |= 0x200;		/* MSI Interrupt enable */
-		nlm_write_reg(lnkbase, PCIE_INT_EN0, val);
+
+	if (cpu_is_xlp9xx()) {
+		val = nlm_read_reg(lnkbase, PCIE_9XX_INT_EN0);
+		if ((val & 0x200) == 0) {
+			val |= 0x200;		/* MSI Interrupt enable */
+			nlm_write_reg(lnkbase, PCIE_9XX_INT_EN0, val);
+		}
+	} else {
+		val = nlm_read_reg(lnkbase, PCIE_INT_EN0);
+		if ((val & 0x200) == 0) {
+			val |= 0x200;		/* MSI Interrupt enable */
+			nlm_write_reg(lnkbase, PCIE_INT_EN0, val);
+		}
 	}
 
 	val = nlm_read_reg(lnkbase, 0x1);	/* CMD */
@@ -329,10 +388,19 @@ static void xlp_config_link_msix(uint64_t lnkbase, int lirq, uint64_t msixaddr)
 	val |= (1 << 8) | lirq;
 	nlm_write_pci_reg(lnkbase, 0xf, val);
 
-	/* MSI-X addresses */
-	nlm_write_reg(lnkbase, PCIE_BRIDGE_MSIX_ADDR_BASE, msixaddr >> 8);
-	nlm_write_reg(lnkbase, PCIE_BRIDGE_MSIX_ADDR_LIMIT,
-					(msixaddr + MSI_ADDR_SZ) >> 8);
+	if (cpu_is_xlp9xx()) {
+		/* MSI-X addresses */
+		nlm_write_reg(lnkbase, PCIE_9XX_BRIDGE_MSIX_ADDR_BASE,
+				msixaddr >> 8);
+		nlm_write_reg(lnkbase, PCIE_9XX_BRIDGE_MSIX_ADDR_LIMIT,
+				(msixaddr + MSI_ADDR_SZ) >> 8);
+	} else {
+		/* MSI-X addresses */
+		nlm_write_reg(lnkbase, PCIE_BRIDGE_MSIX_ADDR_BASE,
+				msixaddr >> 8);
+		nlm_write_reg(lnkbase, PCIE_BRIDGE_MSIX_ADDR_LIMIT,
+				(msixaddr + MSI_ADDR_SZ) >> 8);
+	}
 }
 
 /*
@@ -369,6 +437,7 @@ static int xlp_setup_msix(uint64_t lnkbase, int node, int link,
 
 	xirq += t;
 	msixvec = nlm_irq_msixvec(xirq);
+
 	msg.address_hi = msixaddr >> 32;
 	msg.address_lo = msixaddr & 0xffffffff;
 	msg.data = 0xc00 | msixvec;
@@ -409,7 +478,7 @@ void __init xlp_init_node_msi_irqs(int node, int link)
 {
 	struct nlm_soc_info *nodep;
 	struct xlp_msi_data *md;
-	int irq, i, irt, msixvec;
+	int irq, i, irt, msixvec, val;
 
 	pr_info("[%d %d] Init node PCI IRT\n", node, link);
 	nodep = nlm_get_node(node);
@@ -430,19 +499,28 @@ void __init xlp_init_node_msi_irqs(int node, int link)
 		irq_set_handler_data(i, md);
 	}
 
-	for (i = 0; i < XLP_MSIXVEC_PER_LINK; i++) {
-		/* Initialize MSI-X irts to generate one interrupt per link */
-		msixvec = link * XLP_MSIXVEC_PER_LINK + i;
-		irt = PIC_IRT_PCIE_MSIX_INDEX(msixvec);
-		nlm_pic_init_irt(nodep->picbase, irt, PIC_PCIE_MSIX_IRQ(link),
-			node * nlm_threads_per_node(), 1 /* enable */);
+	for (i = 0; i < XLP_MSIXVEC_PER_LINK ; i++) {
+		if (cpu_is_xlp9xx()) {
+			val = ((node * nlm_threads_per_node()) << 7 |
+				PIC_PCIE_MSIX_IRQ(link) << 1 | 0 << 0);
+			nlm_write_pcie_reg(md->lnkbase, PCIE_9XX_MSIX_VECX(i +
+					(link * XLP_MSIXVEC_PER_LINK)), val);
+		} else {
+			/* Initialize MSI-X irts to generate one interrupt
+			 * per link
+			 */
+			msixvec = link * XLP_MSIXVEC_PER_LINK + i;
+			irt = PIC_IRT_PCIE_MSIX_INDEX(msixvec);
+			nlm_pic_init_irt(nodep->picbase, irt,
+					PIC_PCIE_MSIX_IRQ(link),
+					node * nlm_threads_per_node(), 1);
+		}
 
 		/* Initialize MSI-X extended irq space for the link  */
 		irq = nlm_irq_to_xirq(node, nlm_link_msixirq(link, i));
 		irq_set_chip_and_handler(irq, &xlp_msix_chip, handle_level_irq);
 		irq_set_handler_data(irq, md);
 	}
-
 }
 
 void nlm_dispatch_msi(int node, int lirq)
@@ -454,7 +532,11 @@ void nlm_dispatch_msi(int node, int lirq)
 	link = lirq - PIC_PCIE_LINK_MSI_IRQ_BASE;
 	irqbase = nlm_irq_to_xirq(node, nlm_link_msiirq(link, 0));
 	md = irq_get_handler_data(irqbase);
-	status = nlm_read_reg(md->lnkbase, PCIE_MSI_STATUS) &
+	if (cpu_is_xlp9xx())
+		status = nlm_read_reg(md->lnkbase, PCIE_9XX_MSI_STATUS) &
+						md->msi_enabled_mask;
+	else
+		status = nlm_read_reg(md->lnkbase, PCIE_MSI_STATUS) &
 						md->msi_enabled_mask;
 	while (status) {
 		i = __ffs(status);
@@ -472,10 +554,14 @@ void nlm_dispatch_msix(int node, int lirq)
 	link = lirq - PIC_PCIE_MSIX_IRQ_BASE;
 	irqbase = nlm_irq_to_xirq(node, nlm_link_msixirq(link, 0));
 	md = irq_get_handler_data(irqbase);
-	status = nlm_read_reg(md->lnkbase, PCIE_MSIX_STATUS);
+	if (cpu_is_xlp9xx())
+		status = nlm_read_reg(md->lnkbase, PCIE_9XX_MSIX_STATUSX(link));
+	else
+		status = nlm_read_reg(md->lnkbase, PCIE_MSIX_STATUS);
 
 	/* narrow it down to the MSI-x vectors for our link */
-	status = (status >> (link * XLP_MSIXVEC_PER_LINK)) &
+	if (!cpu_is_xlp9xx())
+		status = (status >> (link * XLP_MSIXVEC_PER_LINK)) &
 			((1 << XLP_MSIXVEC_PER_LINK) - 1);
 
 	while (status) {
diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c
index 3d27800edba2..50034f985be1 100644
--- a/arch/mips/pci/ops-pmcmsp.c
+++ b/arch/mips/pci/ops-pmcmsp.c
@@ -7,7 +7,7 @@
  * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
  *
  * Much of the code is derived from the original DDB5074 port by
- * Geert Uytterhoeven <geert@sonycom.com>
+ * Geert Uytterhoeven <geert@linux-m68k.org>
  *
  * This program is free software; you can redistribute	it and/or modify it
  * under  the terms of	the GNU General	 Public License as published by the
diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c
index 02d64f77e967..d35dc9c9ab9d 100644
--- a/arch/mips/pci/ops-tx3927.c
+++ b/arch/mips/pci/ops-tx3927.c
@@ -11,7 +11,7 @@
  *     Define the pci_ops for TX3927.
  *
  * Much of the code is derived from the original DDB5074 port by
- * Geert Uytterhoeven <geert@sonycom.com>
+ * Geert Uytterhoeven <geert@linux-m68k.org>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c
index 3d5df514d024..0e046d82e4e3 100644
--- a/arch/mips/pci/ops-tx4927.c
+++ b/arch/mips/pci/ops-tx4927.c
@@ -202,17 +202,20 @@ char *tx4927_pcibios_setup(char *str)
 	unsigned long val;
 
 	if (!strncmp(str, "trdyto=", 7)) {
-		if (strict_strtoul(str + 7, 0, &val) == 0)
+		u8 val = 0;
+		if (kstrtou8(str + 7, 0, &val) == 0)
 			tx4927_pci_opts.trdyto = val;
 		return NULL;
 	}
 	if (!strncmp(str, "retryto=", 8)) {
-		if (strict_strtoul(str + 8, 0, &val) == 0)
+		u8 val = 0;
+		if (kstrtou8(str + 8, 0, &val) == 0)
 			tx4927_pci_opts.retryto = val;
 		return NULL;
 	}
 	if (!strncmp(str, "gbwc=", 5)) {
-		if (strict_strtoul(str + 5, 0, &val) == 0)
+		u16 val;
+		if (kstrtou16(str + 5, 0, &val) == 0)
 			tx4927_pci_opts.gbwc = val;
 		return NULL;
 	}
diff --git a/arch/mips/pci/pci-virtio-guest.c b/arch/mips/pci/pci-virtio-guest.c
new file mode 100644
index 000000000000..40a078bc4617
--- /dev/null
+++ b/arch/mips/pci/pci-virtio-guest.c
@@ -0,0 +1,131 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 Cavium, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+
+#include <uapi/asm/bitfield.h>
+#include <asm/byteorder.h>
+#include <asm/io.h>
+
+#define PCI_CONFIG_ADDRESS	0xcf8
+#define PCI_CONFIG_DATA		0xcfc
+
+union pci_config_address {
+	struct {
+		__BITFIELD_FIELD(unsigned enable_bit	  : 1,	/* 31       */
+		__BITFIELD_FIELD(unsigned reserved	  : 7,	/* 30 .. 24 */
+		__BITFIELD_FIELD(unsigned bus_number	  : 8,	/* 23 .. 16 */
+		__BITFIELD_FIELD(unsigned devfn_number	  : 8,	/* 15 .. 8  */
+		__BITFIELD_FIELD(unsigned register_number : 8,	/* 7  .. 0  */
+		)))));
+	};
+	u32 w;
+};
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
+
+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	return ((pin + slot) % 4)+ MIPS_IRQ_PCIA;
+}
+
+static void pci_virtio_guest_write_config_addr(struct pci_bus *bus,
+					unsigned int devfn, int reg)
+{
+	union pci_config_address pca = { .w = 0 };
+
+	pca.register_number = reg;
+	pca.devfn_number = devfn;
+	pca.bus_number = bus->number;
+	pca.enable_bit = 1;
+
+	outl(pca.w, PCI_CONFIG_ADDRESS);
+}
+
+static int pci_virtio_guest_write_config(struct pci_bus *bus,
+		unsigned int devfn, int reg, int size, u32 val)
+{
+	pci_virtio_guest_write_config_addr(bus, devfn, reg);
+
+	switch (size) {
+	case 1:
+		outb(val, PCI_CONFIG_DATA + (reg & 3));
+		break;
+	case 2:
+		outw(val, PCI_CONFIG_DATA + (reg & 2));
+		break;
+	case 4:
+		outl(val, PCI_CONFIG_DATA);
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_virtio_guest_read_config(struct pci_bus *bus, unsigned int devfn,
+					int reg, int size, u32 *val)
+{
+	pci_virtio_guest_write_config_addr(bus, devfn, reg);
+
+	switch (size) {
+	case 1:
+		*val = inb(PCI_CONFIG_DATA + (reg & 3));
+		break;
+	case 2:
+		*val = inw(PCI_CONFIG_DATA + (reg & 2));
+		break;
+	case 4:
+		*val = inl(PCI_CONFIG_DATA);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops pci_virtio_guest_ops = {
+	.read  = pci_virtio_guest_read_config,
+	.write = pci_virtio_guest_write_config,
+};
+
+static struct resource pci_virtio_guest_mem_resource = {
+	.name = "Virtio MEM",
+	.flags = IORESOURCE_MEM,
+	.start	= 0x10000000,
+	.end	= 0x1dffffff
+};
+
+static struct resource pci_virtio_guest_io_resource = {
+	.name = "Virtio IO",
+	.flags = IORESOURCE_IO,
+	.start	= 0,
+	.end	= 0xffff
+};
+
+static struct pci_controller pci_virtio_guest_controller = {
+	.pci_ops = &pci_virtio_guest_ops,
+	.mem_resource = &pci_virtio_guest_mem_resource,
+	.io_resource = &pci_virtio_guest_io_resource,
+};
+
+static int __init pci_virtio_guest_setup(void)
+{
+	pr_err("pci_virtio_guest_setup\n");
+
+	/* Virtio comes pre-assigned */
+	pci_set_flags(PCI_PROBE_ONLY);
+
+	pci_virtio_guest_controller.io_map_base = mips_io_port_base;
+	register_pci_controller(&pci_virtio_guest_controller);
+	return 0;
+}
+arch_initcall(pci_virtio_guest_setup);