Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 308 insertions, 0 deletions

diff --git a/arch/mips/sgi-ip22/ip22-eisa.c b/arch/mips/sgi-ip22/ip22-eisa.c
new file mode 100644
index 000000000000..0ab4abf65d58
--- /dev/null
+++ b/arch/mips/sgi-ip22/ip22-eisa.c
@@ -0,0 +1,308 @@
+/*
+ * Basic EISA bus support for the SGI Indigo-2.
+ *
+ * (C) 2002 Pascal Dameme <netinet@freesurf.fr>
+ *      and Marc Zyngier <mzyngier@freesurf.fr>
+ *
+ * This code is released under both the GPL version 2 and BSD
+ * licenses.  Either license may be used.
+ *
+ * This code offers a very basic support for this EISA bus present in
+ * the SGI Indigo-2. It currently only supports PIO (forget about DMA
+ * for the time being). This is enough for a low-end ethernet card,
+ * but forget about your favorite SCSI card...
+ *
+ * TODO :
+ * - Fix bugs...
+ * - Add ISA support
+ * - Add DMA (yeah, right...).
+ * - Fix more bugs.
+ */
+
+#include <linux/config.h>
+#include <linux/eisa.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel_stat.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/processor.h>
+#include <asm/sgi/ioc.h>
+#include <asm/sgi/mc.h>
+#include <asm/sgi/ip22.h>
+
+#define EISA_MAX_SLOTS		  4
+#define EISA_MAX_IRQ             16
+
+#define EISA_TO_PHYS(x)  (0x00080000 | (x))
+#define EISA_TO_KSEG1(x) ((void *) KSEG1ADDR(EISA_TO_PHYS((x))))
+
+#define EIU_MODE_REG     0x0009ffc0
+#define EIU_STAT_REG     0x0009ffc4
+#define EIU_PREMPT_REG   0x0009ffc8
+#define EIU_QUIET_REG    0x0009ffcc
+#define EIU_INTRPT_ACK   0x00090004
+
+#define EISA_DMA1_STATUS            8
+#define EISA_INT1_CTRL           0x20
+#define EISA_INT1_MASK           0x21
+#define EISA_INT2_CTRL           0xA0
+#define EISA_INT2_MASK           0xA1
+#define EISA_DMA2_STATUS         0xD0
+#define EISA_DMA2_WRITE_SINGLE   0xD4
+#define EISA_EXT_NMI_RESET_CTRL 0x461
+#define EISA_INT1_EDGE_LEVEL    0x4D0
+#define EISA_INT2_EDGE_LEVEL    0x4D1
+#define EISA_VENDOR_ID_OFFSET   0xC80
+
+#define EIU_WRITE_32(x,y) { *((u32 *) KSEG1ADDR(x)) = (u32) (y); mb(); }
+#define EIU_READ_8(x) *((u8 *) KSEG1ADDR(x))
+#define EISA_WRITE_8(x,y) { *((u8 *) EISA_TO_KSEG1(x)) = (u8) (y); mb(); }
+#define EISA_READ_8(x) *((u8 *) EISA_TO_KSEG1(x))
+
+static char *decode_eisa_sig(u8 * sig)
+{
+	static char sig_str[8];
+	u16 rev;
+
+	if (sig[0] & 0x80)
+		return NULL;
+
+	sig_str[0] = ((sig[0] >> 2) & 0x1f) + ('A' - 1);
+	sig_str[1] = (((sig[0] & 3) << 3) | (sig[1] >> 5)) + ('A' - 1);
+	sig_str[2] = (sig[1] & 0x1f) + ('A' - 1);
+	rev = (sig[2] << 8) | sig[3];
+	sprintf(sig_str + 3, "%04X", rev);
+
+	return sig_str;
+}
+
+static void ip22_eisa_intr(int irq, void *dev_id, struct pt_regs *regs)
+{
+	u8 eisa_irq;
+	u8 dma1, dma2;
+
+	eisa_irq = EIU_READ_8(EIU_INTRPT_ACK);
+	dma1 = EISA_READ_8(EISA_DMA1_STATUS);
+	dma2 = EISA_READ_8(EISA_DMA2_STATUS);
+
+	if (eisa_irq >= EISA_MAX_IRQ) {
+		/* Oops, Bad Stuff Happened... */
+		printk(KERN_ERR "eisa_irq %d out of bound\n", eisa_irq);
+
+		EISA_WRITE_8(EISA_INT2_CTRL, 0x20);
+		EISA_WRITE_8(EISA_INT1_CTRL, 0x20);
+	} else
+		do_IRQ(eisa_irq, regs);
+}
+
+static void enable_eisa1_irq(unsigned int irq)
+{
+	unsigned long flags;
+	u8 mask;
+
+	local_irq_save(flags);
+
+	mask = EISA_READ_8(EISA_INT1_MASK);
+	mask &= ~((u8) (1 << irq));
+	EISA_WRITE_8(EISA_INT1_MASK, mask);
+
+	local_irq_restore(flags);
+}
+
+static unsigned int startup_eisa1_irq(unsigned int irq)
+{
+	u8 edge;
+
+	/* Only use edge interrupts for EISA */
+
+	edge = EISA_READ_8(EISA_INT1_EDGE_LEVEL);
+	edge &= ~((u8) (1 << irq));
+	EISA_WRITE_8(EISA_INT1_EDGE_LEVEL, edge);
+
+	enable_eisa1_irq(irq);
+	return 0;
+}
+
+static void disable_eisa1_irq(unsigned int irq)
+{
+	u8 mask;
+
+	mask = EISA_READ_8(EISA_INT1_MASK);
+	mask |= ((u8) (1 << irq));
+	EISA_WRITE_8(EISA_INT1_MASK, mask);
+}
+
+#define shutdown_eisa1_irq	disable_eisa1_irq
+
+static void mask_and_ack_eisa1_irq(unsigned int irq)
+{
+	disable_eisa1_irq(irq);
+
+	EISA_WRITE_8(EISA_INT1_CTRL, 0x20);
+}
+
+static void end_eisa1_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+		enable_eisa1_irq(irq);
+}
+
+static struct hw_interrupt_type ip22_eisa1_irq_type = {
+	.typename	= "IP22 EISA",
+	.startup	= startup_eisa1_irq,
+	.shutdown	= shutdown_eisa1_irq,
+	.enable		= enable_eisa1_irq,
+	.disable	= disable_eisa1_irq,
+	.ack		= mask_and_ack_eisa1_irq,
+	.end		= end_eisa1_irq,
+};
+
+static void enable_eisa2_irq(unsigned int irq)
+{
+	unsigned long flags;
+	u8 mask;
+
+	local_irq_save(flags);
+
+	mask = EISA_READ_8(EISA_INT2_MASK);
+	mask &= ~((u8) (1 << (irq - 8)));
+	EISA_WRITE_8(EISA_INT2_MASK, mask);
+
+	local_irq_restore(flags);
+}
+
+static unsigned int startup_eisa2_irq(unsigned int irq)
+{
+	u8 edge;
+
+	/* Only use edge interrupts for EISA */
+
+	edge = EISA_READ_8(EISA_INT2_EDGE_LEVEL);
+	edge &= ~((u8) (1 << (irq - 8)));
+	EISA_WRITE_8(EISA_INT2_EDGE_LEVEL, edge);
+
+	enable_eisa2_irq(irq);
+	return 0;
+}
+
+static void disable_eisa2_irq(unsigned int irq)
+{
+	u8 mask;
+
+	mask = EISA_READ_8(EISA_INT2_MASK);
+	mask |= ((u8) (1 << (irq - 8)));
+	EISA_WRITE_8(EISA_INT2_MASK, mask);
+}
+
+#define shutdown_eisa2_irq	disable_eisa2_irq
+
+static void mask_and_ack_eisa2_irq(unsigned int irq)
+{
+	disable_eisa2_irq(irq);
+
+	EISA_WRITE_8(EISA_INT2_CTRL, 0x20);
+	EISA_WRITE_8(EISA_INT1_CTRL, 0x20);
+}
+
+static void end_eisa2_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+		enable_eisa2_irq(irq);
+}
+
+static struct hw_interrupt_type ip22_eisa2_irq_type = {
+	.typename	= "IP22 EISA",
+	.startup	= startup_eisa2_irq,
+	.shutdown	= shutdown_eisa2_irq,
+	.enable		= enable_eisa2_irq,
+	.disable	= disable_eisa2_irq,
+	.ack		= mask_and_ack_eisa2_irq,
+	.end		= end_eisa2_irq,
+};
+
+static struct irqaction eisa_action = {
+	.handler	= ip22_eisa_intr,
+	.name		= "EISA",
+};
+
+static struct irqaction cascade_action = {
+	.handler	= no_action,
+	.name		= "EISA cascade",
+};
+
+int __init ip22_eisa_init(void)
+{
+	int i, c;
+	char *str;
+	u8 *slot_addr;
+	
+	if (!(sgimc->systemid & SGIMC_SYSID_EPRESENT)) {
+		printk(KERN_INFO "EISA: bus not present.\n");
+		return 1;
+	}
+
+	printk(KERN_INFO "EISA: Probing bus...\n");
+	for (c = 0, i = 1; i <= EISA_MAX_SLOTS; i++) {
+		slot_addr =
+		    (u8 *) EISA_TO_KSEG1((0x1000 * i) +
+					 EISA_VENDOR_ID_OFFSET);
+		if ((str = decode_eisa_sig(slot_addr))) {
+			printk(KERN_INFO "EISA: slot %d : %s detected.\n",
+			       i, str);
+			c++;
+		}
+	}
+	printk(KERN_INFO "EISA: Detected %d card%s.\n", c, c < 2 ? "" : "s");
+#ifdef CONFIG_ISA
+	printk(KERN_INFO "ISA support compiled in.\n");
+#endif
+
+	/* Warning : BlackMagicAhead(tm).
+	   Please wave your favorite dead chicken over the busses */
+
+	/* First say hello to the EIU */
+	EIU_WRITE_32(EIU_PREMPT_REG, 0x0000FFFF);
+	EIU_WRITE_32(EIU_QUIET_REG, 1);
+	EIU_WRITE_32(EIU_MODE_REG, 0x40f3c07F);
+
+	/* Now be nice to the EISA chipset */
+	EISA_WRITE_8(EISA_EXT_NMI_RESET_CTRL, 1);
+	for (i = 0; i < 10000; i++);	/* Wait long enough for the dust to settle */
+	EISA_WRITE_8(EISA_EXT_NMI_RESET_CTRL, 0);
+	EISA_WRITE_8(EISA_INT1_CTRL, 0x11);
+	EISA_WRITE_8(EISA_INT2_CTRL, 0x11);
+	EISA_WRITE_8(EISA_INT1_MASK, 0);
+	EISA_WRITE_8(EISA_INT2_MASK, 8);
+	EISA_WRITE_8(EISA_INT1_MASK, 4);
+	EISA_WRITE_8(EISA_INT2_MASK, 2);
+	EISA_WRITE_8(EISA_INT1_MASK, 1);
+	EISA_WRITE_8(EISA_INT2_MASK, 1);
+	EISA_WRITE_8(EISA_INT1_MASK, 0xfb);
+	EISA_WRITE_8(EISA_INT2_MASK, 0xff);
+	EISA_WRITE_8(EISA_DMA2_WRITE_SINGLE, 0);
+
+	for (i = SGINT_EISA; i < (SGINT_EISA + EISA_MAX_IRQ); i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		irq_desc[i].action = 0;
+		irq_desc[i].depth = 1;
+		if (i < (SGINT_EISA + 8))
+			irq_desc[i].handler = &ip22_eisa1_irq_type;
+		else
+			irq_desc[i].handler = &ip22_eisa2_irq_type;
+	}
+
+	/* Cannot use request_irq because of kmalloc not being ready at such
+	 * an early stage. Yes, I've been bitten... */
+	setup_irq(SGI_EISA_IRQ, &eisa_action);
+	setup_irq(SGINT_EISA + 2, &cascade_action);
+
+	EISA_bus = 1;
+	return 0;
+}