[POWERPC] 85xx: Convert dts to v1 syntax

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 145 insertions, 144 deletions

diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 1f470c6a1c63..fa298a8c81cc 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -1,7 +1,7 @@
 /*
  * MPC8548 CDS Device Tree Source
  *
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,6 +9,7 @@
  * option) any later version.
  */
 
+/dts-v1/;
 
 / {
 	model = "MPC8548CDS";
@@ -36,11 +37,11 @@
 
 		PowerPC,8548@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <20>;	// 32 bytes
-			i-cache-line-size = <20>;	// 32 bytes
-			d-cache-size = <8000>;		// L1, 32K
-			i-cache-size = <8000>;		// L1, 32K
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
 			timebase-frequency = <0>;	//  33 MHz, from uboot
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
@@ -49,31 +50,31 @@
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 08000000>;	// 128M at 0x0
+		reg = <0x0 0x8000000>;	// 128M at 0x0
 	};
 
 	soc8548@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		ranges = <00000000 e0000000 00100000>;
-		reg = <e0000000 00001000>;	// CCSRBAR
+		ranges = <0x0 0xe0000000 0x100000>;
+		reg = <0xe0000000 0x1000>;	// CCSRBAR
 		bus-frequency = <0>;
 
 		memory-controller@2000 {
 			compatible = "fsl,8548-memory-controller";
-			reg = <2000 1000>;
+			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
-			interrupts = <12 2>;
+			interrupts = <18 2>;
 		};
 
 		l2-cache-controller@20000 {
 			compatible = "fsl,8548-l2-cache-controller";
-			reg = <20000 1000>;
-			cache-line-size = <20>;	// 32 bytes
-			cache-size = <80000>;	// L2, 512K
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
 			interrupt-parent = <&mpic>;
-			interrupts = <10 2>;
+			interrupts = <16 2>;
 		};
 
 		i2c@3000 {
@@ -81,8 +82,8 @@
 			#size-cells = <0>;
 			cell-index = <0>;
 			compatible = "fsl-i2c";
-			reg = <3000 100>;
-			interrupts = <2b 2>;
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
@@ -92,8 +93,8 @@
 			#size-cells = <0>;
 			cell-index = <1>;
 			compatible = "fsl-i2c";
-			reg = <3100 100>;
-			interrupts = <2b 2>;
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
@@ -102,30 +103,30 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,gianfar-mdio";
-			reg = <24520 20>;
+			reg = <0x24520 0x20>;
 
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <0>;
+				reg = <0x0>;
 				device_type = "ethernet-phy";
 			};
 			phy1: ethernet-phy@1 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <1>;
+				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 			phy2: ethernet-phy@2 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <2>;
+				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
 			phy3: ethernet-phy@3 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <3>;
+				reg = <0x3>;
 				device_type = "ethernet-phy";
 			};
 		};
@@ -135,9 +136,9 @@
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
-			reg = <24000 1000>;
+			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <1d 2 1e 2 22 2>;
+			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy0>;
 		};
@@ -147,9 +148,9 @@
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
-			reg = <25000 1000>;
+			reg = <0x25000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <23 2 24 2 28 2>;
+			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy1>;
 		};
@@ -160,9 +161,9 @@
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
-			reg = <26000 1000>;
+			reg = <0x26000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <1f 2 20 2 21 2>;
+			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy2>;
 		};
@@ -172,9 +173,9 @@
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
-			reg = <27000 1000>;
+			reg = <0x27000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <25 2 26 2 27 2>;
+			interrupts = <37 2 38 2 39 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy3>;
 		};
@@ -184,9 +185,9 @@
 			cell-index = <0>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4500 100>;	// reg base, size
+			reg = <0x4500 0x100>;	// reg base, size
 			clock-frequency = <0>;	// should we fill in in uboot?
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -194,15 +195,15 @@
 			cell-index = <1>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4600 100>;	// reg base, size
+			reg = <0x4600 0x100>;	// reg base, size
 			clock-frequency = <0>;	// should we fill in in uboot?
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
 		global-utilities@e0000 {	//global utilities reg
 			compatible = "fsl,mpc8548-guts";
-			reg = <e0000 1000>;
+			reg = <0xe0000 0x1000>;
 			fsl,has-rstcr;
 		};
 
@@ -211,7 +212,7 @@
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
-			reg = <40000 40000>;
+			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
                         big-endian;
@@ -220,139 +221,139 @@
 
 	pci0: pci@e0008000 {
 		cell-index = <0>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x4 (PCIX Slot 2) */
-			02000 0 0 1 &mpic 0 1
-			02000 0 0 2 &mpic 1 1
-			02000 0 0 3 &mpic 2 1
-			02000 0 0 4 &mpic 3 1
+			0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x5 (PCIX Slot 3) */
-			02800 0 0 1 &mpic 1 1
-			02800 0 0 2 &mpic 2 1
-			02800 0 0 3 &mpic 3 1
-			02800 0 0 4 &mpic 0 1
+			0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
+			0x2800 0x0 0x0 0x2 &mpic 0x2 0x1
+			0x2800 0x0 0x0 0x3 &mpic 0x3 0x1
+			0x2800 0x0 0x0 0x4 &mpic 0x0 0x1
 
 			/* IDSEL 0x6 (PCIX Slot 4) */
-			03000 0 0 1 &mpic 2 1
-			03000 0 0 2 &mpic 3 1
-			03000 0 0 3 &mpic 0 1
-			03000 0 0 4 &mpic 1 1
+			0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
+			0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x8 (PCIX Slot 5) */
-			04000 0 0 1 &mpic 0 1
-			04000 0 0 2 &mpic 1 1
-			04000 0 0 3 &mpic 2 1
-			04000 0 0 4 &mpic 3 1
+			0x4000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x4000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x4000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x4000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0xC (Tsi310 bridge) */
-			06000 0 0 1 &mpic 0 1
-			06000 0 0 2 &mpic 1 1
-			06000 0 0 3 &mpic 2 1
-			06000 0 0 4 &mpic 3 1
+			0x6000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x6000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x6000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x6000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x14 (Slot 2) */
-			0a000 0 0 1 &mpic 0 1
-			0a000 0 0 2 &mpic 1 1
-			0a000 0 0 3 &mpic 2 1
-			0a000 0 0 4 &mpic 3 1
+			0xa000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0xa000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0xa000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0xa000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x15 (Slot 3) */
-			0a800 0 0 1 &mpic 1 1
-			0a800 0 0 2 &mpic 2 1
-			0a800 0 0 3 &mpic 3 1
-			0a800 0 0 4 &mpic 0 1
+			0xa800 0x0 0x0 0x1 &mpic 0x1 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0x2 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0x3 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0x0 0x1
 
 			/* IDSEL 0x16 (Slot 4) */
-			0b000 0 0 1 &mpic 2 1
-			0b000 0 0 2 &mpic 3 1
-			0b000 0 0 3 &mpic 0 1
-			0b000 0 0 4 &mpic 1 1
+			0xb000 0x0 0x0 0x1 &mpic 0x2 0x1
+			0xb000 0x0 0x0 0x2 &mpic 0x3 0x1
+			0xb000 0x0 0x0 0x3 &mpic 0x0 0x1
+			0xb000 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x18 (Slot 5) */
-			0c000 0 0 1 &mpic 0 1
-			0c000 0 0 2 &mpic 1 1
-			0c000 0 0 3 &mpic 2 1
-			0c000 0 0 4 &mpic 3 1
+			0xc000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0xc000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0xc000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0xc000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
-			0E000 0 0 1 &mpic 0 1
-			0E000 0 0 2 &mpic 1 1
-			0E000 0 0 3 &mpic 2 1
-			0E000 0 0 4 &mpic 3 1>;
+			0xe000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0xe000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0xe000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0xe000 0x0 0x0 0x4 &mpic 0x3 0x1>;
 
 		interrupt-parent = <&mpic>;
-		interrupts = <18 2>;
+		interrupts = <24 2>;
 		bus-range = <0 0>;
-		ranges = <02000000 0 80000000 80000000 0 10000000
-			  01000000 0 00000000 e2000000 0 00800000>;
-		clock-frequency = <3f940aa>;
+		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+			  0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
+		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e0008000 1000>;
+		reg = <0xe0008000 0x1000>;
 		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
 		device_type = "pci";
 
 		pci_bridge@1c {
-			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 			interrupt-map = <
 
 				/* IDSEL 0x00 (PrPMC Site) */
-				0000 0 0 1 &mpic 0 1
-				0000 0 0 2 &mpic 1 1
-				0000 0 0 3 &mpic 2 1
-				0000 0 0 4 &mpic 3 1
+				0000 0x0 0x0 0x1 &mpic 0x0 0x1
+				0000 0x0 0x0 0x2 &mpic 0x1 0x1
+				0000 0x0 0x0 0x3 &mpic 0x2 0x1
+				0000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 				/* IDSEL 0x04 (VIA chip) */
-				2000 0 0 1 &mpic 0 1
-				2000 0 0 2 &mpic 1 1
-				2000 0 0 3 &mpic 2 1
-				2000 0 0 4 &mpic 3 1
+				0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
+				0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
+				0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
+				0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 				/* IDSEL 0x05 (8139) */
-				2800 0 0 1 &mpic 1 1
+				0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
 
 				/* IDSEL 0x06 (Slot 6) */
-				3000 0 0 1 &mpic 2 1
-				3000 0 0 2 &mpic 3 1
-				3000 0 0 3 &mpic 0 1
-				3000 0 0 4 &mpic 1 1
+				0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
+				0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
+				0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
+				0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
 
 				/* IDESL 0x07 (Slot 7) */
-				3800 0 0 1 &mpic 3 1
-				3800 0 0 2 &mpic 0 1
-				3800 0 0 3 &mpic 1 1
-				3800 0 0 4 &mpic 2 1>;
+				0x3800 0x0 0x0 0x1 &mpic 0x3 0x1
+				0x3800 0x0 0x0 0x2 &mpic 0x0 0x1
+				0x3800 0x0 0x0 0x3 &mpic 0x1 0x1
+				0x3800 0x0 0x0 0x4 &mpic 0x2 0x1>;
 
-			reg = <e000 0 0 0 0>;
+			reg = <0xe000 0x0 0x0 0x0 0x0>;
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
-			ranges = <02000000 0 80000000
-				  02000000 0 80000000
-				  0 20000000
-				  01000000 0 00000000
-				  01000000 0 00000000
-				  0 00080000>;
-			clock-frequency = <1fca055>;
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x80000>;
+			clock-frequency = <33333333>;
 
 			isa@4 {
 				device_type = "isa";
 				#interrupt-cells = <2>;
 				#size-cells = <1>;
 				#address-cells = <2>;
-				reg = <2000 0 0 0 0>;
-				ranges = <1 0 01000000 0 0 00001000>;
+				reg = <0x2000 0x0 0x0 0x0 0x0>;
+				ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>;
 				interrupt-parent = <&i8259>;
 
 				i8259: interrupt-controller@20 {
 					interrupt-controller;
 					device_type = "interrupt-controller";
-					reg = <1 20 2
-					       1 a0 2
-					       1 4d0 2>;
+					reg = <0x1 0x20 0x2
+					       0x1 0xa0 0x2
+					       0x1 0x4d0 0x2>;
 					#address-cells = <0>;
 					#interrupt-cells = <2>;
 					compatible = "chrp,iic";
@@ -362,7 +363,7 @@
 
 				rtc@70 {
 					compatible = "pnpPNP,b00";
-					reg = <1 70 2>;
+					reg = <0x1 0x70 0x2>;
 				};
 			};
 		};
@@ -370,64 +371,64 @@
 
 	pci1: pci@e0009000 {
 		cell-index = <1>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 			/* IDSEL 0x15 */
-			a800 0 0 1 &mpic b 1
-			a800 0 0 2 &mpic 1 1
-			a800 0 0 3 &mpic 2 1
-			a800 0 0 4 &mpic 3 1>;
+			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0x1 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0x2 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0x3 0x1>;
 
 		interrupt-parent = <&mpic>;
-		interrupts = <19 2>;
+		interrupts = <25 2>;
 		bus-range = <0 0>;
-		ranges = <02000000 0 90000000 90000000 0 10000000
-			  01000000 0 00000000 e2800000 0 00800000>;
-		clock-frequency = <3f940aa>;
+		ranges = <0x2000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+			  0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
+		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e0009000 1000>;
+		reg = <0xe0009000 0x1000>;
 		compatible = "fsl,mpc8540-pci";
 		device_type = "pci";
 	};
 
 	pci2: pcie@e000a000 {
 		cell-index = <2>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 			/* IDSEL 0x0 (PEX) */
-			00000 0 0 1 &mpic 0 1
-			00000 0 0 2 &mpic 1 1
-			00000 0 0 3 &mpic 2 1
-			00000 0 0 4 &mpic 3 1>;
+			00000 0x0 0x0 0x1 &mpic 0x0 0x1
+			00000 0x0 0x0 0x2 &mpic 0x1 0x1
+			00000 0x0 0x0 0x3 &mpic 0x2 0x1
+			00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
 
 		interrupt-parent = <&mpic>;
-		interrupts = <1a 2>;
-		bus-range = <0 ff>;
-		ranges = <02000000 0 a0000000 a0000000 0 20000000
-			  01000000 0 00000000 e3000000 0 08000000>;
-		clock-frequency = <1fca055>;
+		interrupts = <26 2>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe3000000 0x0 0x8000000>;
+		clock-frequency = <33333333>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e000a000 1000>;
+		reg = <0xe000a000 0x1000>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		pcie@0 {
-			reg = <0 0 0 0 0>;
+			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <02000000 0 a0000000
-				  02000000 0 a0000000
-				  0 20000000
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
 
-				  01000000 0 00000000
-				  01000000 0 00000000
-				  0 08000000>;
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x8000000>;
 		};
 	};
 };