summaryrefslogtreecommitdiff
path: root/arch/powerpc/boot/dts/tqm5200.dts
diff options
context:
space:
mode:
authorGrant Likely <grant.likely@secretlab.ca>2009-02-03 12:30:26 -0700
committerGrant Likely <grant.likely@secretlab.ca>2009-02-03 12:30:26 -0700
commitb8842451079a3034363320b932205d9cea791e9d (patch)
tree0b8b0e2f2b2a244501dd9956803635136ba60ab0 /arch/powerpc/boot/dts/tqm5200.dts
parent3b5ebf8e1ac88babf60772d54bc81b180b5f53b0 (diff)
powerpc/5200: Trim cruft from device trees
Trim out obsolete/extraneous properties and tighten up some usage conventions. Changes include: - removal of device_type properties - removal of cell-index properties - Addition of gpio-controller and #gpio-cells properties to gpio nodes - Move common interrupt-parent property out of device nodes and into top level parent node. This patch also include what looks to be just trivial editorial whitespace/format changes, but there is real method in this madness. Editorial changes were made to keep the all the mpc5200 board device trees as similar as possible so that diffs between them only show the real differences between the boards. The pcm030 device tree was most affected by this because many of the comments had been changed from // to /* */ style and some cell values where changed from decimal to hex format when it was cloned from one of the other 5200 device trees. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Diffstat (limited to 'arch/powerpc/boot/dts/tqm5200.dts')
-rw-r--r--arch/powerpc/boot/dts/tqm5200.dts32
1 files changed, 6 insertions, 26 deletions
diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts
index 906302e26a62..c9590b58b7b0 100644
--- a/arch/powerpc/boot/dts/tqm5200.dts
+++ b/arch/powerpc/boot/dts/tqm5200.dts
@@ -17,6 +17,7 @@
compatible = "tqc,tqm5200";
#address-cells = <1>;
#size-cells = <1>;
+ interrupt-parent = <&mpc5200_pic>;
cpus {
#address-cells = <1>;
@@ -66,36 +67,33 @@
compatible = "fsl,mpc5200-gpt";
reg = <0x600 0x10>;
interrupts = <1 9 0>;
- interrupt-parent = <&mpc5200_pic>;
fsl,has-wdt;
};
can@900 {
compatible = "fsl,mpc5200-mscan";
interrupts = <2 17 0>;
- interrupt-parent = <&mpc5200_pic>;
reg = <0x900 0x80>;
};
can@980 {
compatible = "fsl,mpc5200-mscan";
interrupts = <2 18 0>;
- interrupt-parent = <&mpc5200_pic>;
reg = <0x980 0x80>;
};
- gpio@b00 {
+ gpio_simple: gpio@b00 {
compatible = "fsl,mpc5200-gpio";
reg = <0xb00 0x40>;
interrupts = <1 7 0>;
- interrupt-parent = <&mpc5200_pic>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
usb@1000 {
compatible = "fsl,mpc5200-ohci","ohci-be";
reg = <0x1000 0xff>;
interrupts = <2 6 0>;
- interrupt-parent = <&mpc5200_pic>;
};
dma-controller@1200 {
@@ -105,7 +103,6 @@
3 4 0 3 5 0 3 6 0 3 7 0
3 8 0 3 9 0 3 10 0 3 11 0
3 12 0 3 13 0 3 14 0 3 15 0>;
- interrupt-parent = <&mpc5200_pic>;
};
xlb@1f00 {
@@ -114,39 +111,28 @@
};
serial@2000 { // PSC1
- device_type = "serial";
compatible = "fsl,mpc5200-psc-uart";
- port-number = <0>; // Logical port assignment
reg = <0x2000 0x100>;
interrupts = <2 1 0>;
- interrupt-parent = <&mpc5200_pic>;
};
serial@2200 { // PSC2
- device_type = "serial";
compatible = "fsl,mpc5200-psc-uart";
- port-number = <1>; // Logical port assignment
reg = <0x2200 0x100>;
interrupts = <2 2 0>;
- interrupt-parent = <&mpc5200_pic>;
};
serial@2400 { // PSC3
- device_type = "serial";
compatible = "fsl,mpc5200-psc-uart";
- port-number = <2>; // Logical port assignment
reg = <0x2400 0x100>;
interrupts = <2 3 0>;
- interrupt-parent = <&mpc5200_pic>;
};
ethernet@3000 {
- device_type = "network";
compatible = "fsl,mpc5200-fec";
reg = <0x3000 0x400>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
- interrupt-parent = <&mpc5200_pic>;
phy-handle = <&phy0>;
};
@@ -156,10 +142,8 @@
compatible = "fsl,mpc5200-mdio";
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
- interrupt-parent = <&mpc5200_pic>;
phy0: ethernet-phy@0 {
- device_type = "ethernet-phy";
reg = <0>;
};
};
@@ -168,7 +152,6 @@
compatible = "fsl,mpc5200-ata";
reg = <0x3a00 0x100>;
interrupts = <2 7 0>;
- interrupt-parent = <&mpc5200_pic>;
};
i2c@3d40 {
@@ -177,7 +160,6 @@
compatible = "fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
- interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
rtc@68 {
@@ -192,9 +174,8 @@
};
};
- lpb {
- model = "fsl,lpb";
- compatible = "fsl,lpb";
+ localbus {
+ compatible = "fsl,mpc5200-lpb","simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0xfc000000 0x02000000>;
@@ -223,7 +204,6 @@
0xc000 0 0 4 &mpc5200_pic 0 0 3>;
clock-frequency = <0>; // From boot loader
interrupts = <2 8 0 2 9 0 2 10 0>;
- interrupt-parent = <&mpc5200_pic>;
bus-range = <0 0>;
ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
0x02000000 0 0x90000000 0x90000000 0 0x10000000