Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Fixes and improvements for perf/core:

. Overhaul the tools/ makefiles, gluing them to the top level Makefile, from
  Borislav Petkov.

. Move the UI files from tools/perf/util/ui/ to tools/perf/ui/. Also move
  the GTK+ browser to tools/perf/ui/gtk/, from Namhyung Kim.

. Only fallback to sw cycles counter on ENOENT for the hw cycles, from
  Robert Richter

. Trivial fixes from Robert Richter

. Handle the autogenerated bison/flex files better, from Namhyung and Jiri Olsa.

. Navigate jump instructions in the annotate browser, just press enter or ->,
  still needs support for a jump navigation history, i.e. to go back.

. Search string in the annotate browser: same keys as vim:
     / forward
     n next backward/forward
     ? backward

. Clarify number of events/samples in the report header, from Ashay Rane

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

1 files changed, 21 insertions, 41 deletions

diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 06c7251c1bf7..58bddee8e1e8 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -32,13 +32,13 @@
 #include <asm/cputable.h>
 #include <asm/setup.h>
 #include <asm/hvcall.h>
-#include <asm/iseries/lpar_map.h>
 #include <asm/thread_info.h>
 #include <asm/firmware.h>
 #include <asm/page_64.h>
 #include <asm/irqflags.h>
 #include <asm/kvm_book3s_asm.h>
 #include <asm/ptrace.h>
+#include <asm/hw_irq.h>
 
 /* The physical memory is laid out such that the secondary processor
  * spin code sits at 0x0000...0x00ff. On server, the vectors follow
@@ -57,10 +57,6 @@
  *	entry in r9 for debugging purposes
  *   2. Secondary processors enter at 0x60 with PIR in gpr3
  *
- *  For iSeries:
- *   1. The MMU is on (as it always is for iSeries)
- *   2. The kernel is entered at system_reset_iSeries
- *
  *  For Book3E processors:
  *   1. The MMU is on running in AS0 in a state defined in ePAPR
  *   2. The kernel is entered at __start
@@ -93,15 +89,6 @@ __secondary_hold_spinloop:
 __secondary_hold_acknowledge:
 	.llong	0x0
 
-#ifdef CONFIG_PPC_ISERIES
-	/*
-	 * At offset 0x20, there is a pointer to iSeries LPAR data.
-	 * This is required by the hypervisor
-	 */
-	. = 0x20
-	.llong hvReleaseData-KERNELBASE
-#endif /* CONFIG_PPC_ISERIES */
-
 #ifdef CONFIG_RELOCATABLE
 	/* This flag is set to 1 by a loader if the kernel should run
 	 * at the loaded address instead of the linked address.  This
@@ -564,7 +551,8 @@ _GLOBAL(pmac_secondary_start)
 	 */
 	li	r0,0
 	stb	r0,PACASOFTIRQEN(r13)
-	stb	r0,PACAHARDIRQEN(r13)
+	li	r0,PACA_IRQ_HARD_DIS
+	stb	r0,PACAIRQHAPPENED(r13)
 
 	/* Create a temp kernel stack for use before relocation is on.	*/
 	ld	r1,PACAEMERGSP(r13)
@@ -582,7 +570,7 @@ _GLOBAL(pmac_secondary_start)
  *   1. Processor number
  *   2. Segment table pointer (virtual address)
  * On entry the following are set:
- *   r1	       = stack pointer.  vaddr for iSeries, raddr (temp stack) for pSeries
+ *   r1	       = stack pointer (real addr of temp stack)
  *   r24       = cpu# (in Linux terms)
  *   r13       = paca virtual address
  *   SPRG_PACA = paca virtual address
@@ -595,7 +583,7 @@ __secondary_start:
 	/* Set thread priority to MEDIUM */
 	HMT_MEDIUM
 
-	/* Initialize the kernel stack.  Just a repeat for iSeries.	 */
+	/* Initialize the kernel stack */
 	LOAD_REG_ADDR(r3, current_set)
 	sldi	r28,r24,3		/* get current_set[cpu#]	 */
 	ldx	r14,r3,r28
@@ -615,20 +603,16 @@ __secondary_start:
 	li	r7,0
 	mtlr	r7
 
+	/* Mark interrupts soft and hard disabled (they might be enabled
+	 * in the PACA when doing hotplug)
+	 */
+	stb	r7,PACASOFTIRQEN(r13)
+	li	r0,PACA_IRQ_HARD_DIS
+	stb	r0,PACAIRQHAPPENED(r13)
+
 	/* enable MMU and jump to start_secondary */
 	LOAD_REG_ADDR(r3, .start_secondary_prolog)
 	LOAD_REG_IMMEDIATE(r4, MSR_KERNEL)
-#ifdef CONFIG_PPC_ISERIES
-BEGIN_FW_FTR_SECTION
-	ori	r4,r4,MSR_EE
-	li	r8,1
-	stb	r8,PACAHARDIRQEN(r13)
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif
-BEGIN_FW_FTR_SECTION
-	stb	r7,PACAHARDIRQEN(r13)
-END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
-	stb	r7,PACASOFTIRQEN(r13)
 
 	mtspr	SPRN_SRR0,r3
 	mtspr	SPRN_SRR1,r4
@@ -771,22 +755,18 @@ _INIT_GLOBAL(start_here_common)
 	/* Load the TOC (virtual address) */
 	ld	r2,PACATOC(r13)
 
+	/* Do more system initializations in virtual mode */
 	bl	.setup_system
 
-	/* Load up the kernel context */
-5:
-	li	r5,0
-	stb	r5,PACASOFTIRQEN(r13)	/* Soft Disabled */
-#ifdef CONFIG_PPC_ISERIES
-BEGIN_FW_FTR_SECTION
-	mfmsr	r5
-	ori	r5,r5,MSR_EE		/* Hard Enabled on iSeries*/
-	mtmsrd	r5
-	li	r5,1
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif
-	stb	r5,PACAHARDIRQEN(r13)	/* Hard Disabled on others */
+	/* Mark interrupts soft and hard disabled (they might be enabled
+	 * in the PACA when doing hotplug)
+	 */
+	li	r0,0
+	stb	r0,PACASOFTIRQEN(r13)
+	li	r0,PACA_IRQ_HARD_DIS
+	stb	r0,PACAIRQHAPPENED(r13)
 
+	/* Generic kernel entry */
 	bl	.start_kernel
 
 	/* Not reached */