powerpc: Make it possible to move the interrupt handlers away from the kernel

This changes the way that the exception prologs transfer control to
the handlers in 64-bit kernels with the aim of making it possible to
have the prologs separate from the main body of the kernel.  Now,
instead of computing the address of the handler by taking the top
32 bits of the paca address (to get the 0xc0000000........ part) and
ORing in something in the bottom 16 bits, we get the base address of
the kernel by doing a load from the paca and add an offset.

This also replaces an mfmsr and an ori to compute the MSR value for
the handler with a load from the paca.  That makes it unnecessary to
have a separate version of EXCEPTION_PROLOG_PSERIES that forces 64-bit
mode.

We can no longer use a direct branches in the exception prolog code,
which means that the SLB miss handlers can't branch directly to
.slb_miss_realmode any more.  Instead we have to compute the address
and do an indirect branch.  This is conditional on CONFIG_RELOCATABLE;
for non-relocatable kernels we use a direct branch as before.  (A later
change will allow CONFIG_RELOCATABLE to be set on 64-bit powerpc.)

Since the secondary CPUs on pSeries start execution in the first 0x100
bytes of real memory and then have to get to wherever the kernel is,
we can't use a direct branch to get there.  Instead this changes
__secondary_hold_spinloop from a flag to a function pointer.  When it
is set to a non-NULL value, the secondary CPUs jump to the function
pointed to by that value.

Finally this eliminates one code difference between 32-bit and 64-bit
by making __secondary_hold be the text address of the secondary CPU
spinloop rather than a function descriptor for it.

Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 55 insertions, 16 deletions

diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 27935d1ab6a1..97bb6e6f67b1 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -82,7 +82,11 @@ END_FTR_SECTION(0, 1)
 	/* Catch branch to 0 in real mode */
 	trap
 
-	/* Secondary processors spin on this value until it goes to 1. */
+	/* Secondary processors spin on this value until it becomes nonzero.
+	 * When it does it contains the real address of the descriptor
+	 * of the function that the cpu should jump to to continue
+	 * initialization.
+	 */
 	.globl  __secondary_hold_spinloop
 __secondary_hold_spinloop:
 	.llong	0x0
@@ -109,8 +113,11 @@ __secondary_hold_acknowledge:
  * before the bulk of the kernel has been relocated.  This code
  * is relocated to physical address 0x60 before prom_init is run.
  * All of it must fit below the first exception vector at 0x100.
+ * Use .globl here not _GLOBAL because we want __secondary_hold
+ * to be the actual text address, not a descriptor.
  */
-_GLOBAL(__secondary_hold)
+	.globl	__secondary_hold
+__secondary_hold:
 	mfmsr	r24
 	ori	r24,r24,MSR_RI
 	mtmsrd	r24			/* RI on */
@@ -126,11 +133,11 @@ _GLOBAL(__secondary_hold)
 
 	/* All secondary cpus wait here until told to start. */
 100:	ld	r4,__secondary_hold_spinloop@l(0)
-	cmpdi	0,r4,1
-	bne	100b
+	cmpdi	0,r4,0
+	beq	100b
 
 #if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
-	LOAD_REG_IMMEDIATE(r4, .generic_secondary_smp_init)
+	ld	r4,0(r4)		/* deref function descriptor */
 	mtctr	r4
 	mr	r3,r24
 	bctr
@@ -147,6 +154,10 @@ exception_marker:
 /*
  * This is the start of the interrupt handlers for pSeries
  * This code runs with relocation off.
+ * Code from here to __end_interrupts gets copied down to real
+ * address 0x100 when we are running a relocatable kernel.
+ * Therefore any relative branches in this section must only
+ * branch to labels in this section.
  */
 	. = 0x100
 	.globl __start_interrupts
@@ -200,7 +211,20 @@ data_access_slb_pSeries:
 	mfspr	r10,SPRN_SPRG1
 	std	r10,PACA_EXSLB+EX_R13(r13)
 	mfspr	r12,SPRN_SRR1		/* and SRR1 */
-	b	.slb_miss_realmode	/* Rel. branch works in real mode */
+#ifndef CONFIG_RELOCATABLE
+	b	.slb_miss_realmode
+#else
+	/*
+	 * We can't just use a direct branch to .slb_miss_realmode
+	 * because the distance from here to there depends on where
+	 * the kernel ends up being put.
+	 */
+	mfctr	r11
+	ld	r10,PACAKBASE(r13)
+	LOAD_HANDLER(r10, .slb_miss_realmode)
+	mtctr	r10
+	bctr
+#endif
 
 	STD_EXCEPTION_PSERIES(0x400, instruction_access)
 
@@ -225,7 +249,15 @@ instruction_access_slb_pSeries:
 	mfspr	r10,SPRN_SPRG1
 	std	r10,PACA_EXSLB+EX_R13(r13)
 	mfspr	r12,SPRN_SRR1		/* and SRR1 */
-	b	.slb_miss_realmode	/* Rel. branch works in real mode */
+#ifndef CONFIG_RELOCATABLE
+	b	.slb_miss_realmode
+#else
+	mfctr	r11
+	ld	r10,PACAKBASE(r13)
+	LOAD_HANDLER(r10, .slb_miss_realmode)
+	mtctr	r10
+	bctr
+#endif
 
 	MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt)
 	STD_EXCEPTION_PSERIES(0x600, alignment)
@@ -244,14 +276,12 @@ BEGIN_FTR_SECTION
 	beq-	1f
 END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
 	mr	r9,r13
-	mfmsr	r10
 	mfspr	r13,SPRN_SPRG3
 	mfspr	r11,SPRN_SRR0
-	clrrdi	r12,r13,32
-	oris	r12,r12,system_call_common@h
-	ori	r12,r12,system_call_common@l
+	ld	r12,PACAKBASE(r13)
+	ld	r10,PACAKMSR(r13)
+	LOAD_HANDLER(r12, system_call_entry)
 	mtspr	SPRN_SRR0,r12
-	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI
 	mfspr	r12,SPRN_SRR1
 	mtspr	SPRN_SRR1,r10
 	rfid
@@ -379,7 +409,10 @@ __end_interrupts:
 
 /*
  * Code from here down to __end_handlers is invoked from the
- * exception prologs above.
+ * exception prologs above.  Because the prologs assemble the
+ * addresses of these handlers using the LOAD_HANDLER macro,
+ * which uses an addi instruction, these handlers must be in
+ * the first 32k of the kernel image.
  */
 
 /*** Common interrupt handlers ***/
@@ -419,6 +452,10 @@ machine_check_common:
 	STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception)
 #endif /* CONFIG_CBE_RAS */
 
+	.align	7
+system_call_entry:
+	b	system_call_common
+
 /*
  * Here we have detected that the kernel stack pointer is bad.
  * R9 contains the saved CR, r13 points to the paca,
@@ -562,6 +599,9 @@ unrecov_user_slb:
  */
 _GLOBAL(slb_miss_realmode)
 	mflr	r10
+#ifdef CONFIG_RELOCATABLE
+	mtctr	r11
+#endif
 
 	stw	r9,PACA_EXSLB+EX_CCR(r13)	/* save CR in exc. frame */
 	std	r10,PACA_EXSLB+EX_LR(r13)	/* save LR */
@@ -612,11 +652,10 @@ BEGIN_FW_FTR_SECTION
 END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
 #endif /* CONFIG_PPC_ISERIES */
 	mfspr	r11,SPRN_SRR0
-	clrrdi	r10,r13,32
+	ld	r10,PACAKBASE(r13)
 	LOAD_HANDLER(r10,unrecov_slb)
 	mtspr	SPRN_SRR0,r10
-	mfmsr	r10
-	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI
+	ld	r10,PACAKMSR(r13)
 	mtspr	SPRN_SRR1,r10
 	rfid
 	b	.