[POWERPC] cell: add RAS support

This is a first version of support for the Cell BE "Reliability,
Availability and Serviceability" features.

It doesn't yet handle some of the RAS interrupts (the ones described in
iic_is/iic_irr), I'm still working on a proper way to expose these. They
are essentially a cascaded controller by themselves (sic !) though I may
just handle them locally to the iic driver. I need also to sync with
David Erb on the way he hooked in the performance monitor interrupt.

So that's all for 2.6.17 and I'll do more work on that with my rework of
the powerpc interrupt layer that I'm hacking on at the moment.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 112 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c
new file mode 100644
index 000000000000..033ad6e2827b
--- /dev/null
+++ b/arch/powerpc/platforms/cell/ras.c
@@ -0,0 +1,112 @@
+#define DEBUG
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/smp.h>
+
+#include <asm/reg.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+
+#include "ras.h"
+#include "cbe_regs.h"
+
+
+static void dump_fir(int cpu)
+{
+	struct cbe_pmd_regs __iomem *pregs = cbe_get_cpu_pmd_regs(cpu);
+	struct cbe_iic_regs __iomem *iregs = cbe_get_cpu_iic_regs(cpu);
+
+	if (pregs == NULL)
+		return;
+
+	/* Todo: do some nicer parsing of bits and based on them go down
+	 * to other sub-units FIRs and not only IIC
+	 */
+	printk(KERN_ERR "Global Checkstop FIR    : 0x%016lx\n",
+	       in_be64(&pregs->checkstop_fir));
+	printk(KERN_ERR "Global Recoverable FIR  : 0x%016lx\n",
+	       in_be64(&pregs->checkstop_fir));
+	printk(KERN_ERR "Global MachineCheck FIR : 0x%016lx\n",
+	       in_be64(&pregs->spec_att_mchk_fir));
+
+	if (iregs == NULL)
+		return;
+	printk(KERN_ERR "IOC FIR                 : 0x%016lx\n",
+	       in_be64(&iregs->ioc_fir));
+
+}
+
+void cbe_system_error_exception(struct pt_regs *regs)
+{
+	int cpu = smp_processor_id();
+
+	printk(KERN_ERR "System Error Interrupt on CPU %d !\n", cpu);
+	dump_fir(cpu);
+	dump_stack();
+}
+
+void cbe_maintenance_exception(struct pt_regs *regs)
+{
+	int cpu = smp_processor_id();
+
+	/*
+	 * Nothing implemented for the maintenance interrupt at this point
+	 */
+
+	printk(KERN_ERR "Unhandled Maintenance interrupt on CPU %d !\n", cpu);
+	dump_stack();
+}
+
+void cbe_thermal_exception(struct pt_regs *regs)
+{
+	int cpu = smp_processor_id();
+
+	/*
+	 * Nothing implemented for the thermal interrupt at this point
+	 */
+
+	printk(KERN_ERR "Unhandled Thermal interrupt on CPU %d !\n", cpu);
+	dump_stack();
+}
+
+static int cbe_machine_check_handler(struct pt_regs *regs)
+{
+	int cpu = smp_processor_id();
+
+	printk(KERN_ERR "Machine Check Interrupt on CPU %d !\n", cpu);
+	dump_fir(cpu);
+
+	/* No recovery from this code now, lets continue */
+	return 0;
+}
+
+void __init cbe_ras_init(void)
+{
+	unsigned long hid0;
+
+	/*
+	 * Enable System Error & thermal interrupts and wakeup conditions
+	 */
+
+	hid0 = mfspr(SPRN_HID0);
+	hid0 |= HID0_CBE_THERM_INT_EN | HID0_CBE_THERM_WAKEUP |
+		HID0_CBE_SYSERR_INT_EN | HID0_CBE_SYSERR_WAKEUP;
+	mtspr(SPRN_HID0, hid0);
+	mb();
+
+	/*
+	 * Install machine check handler. Leave setting of precise mode to
+	 * what the firmware did for now
+	 */
+	ppc_md.machine_check_exception = cbe_machine_check_handler;
+	mb();
+
+	/*
+	 * For now, we assume that IOC_FIR is already set to forward some
+	 * error conditions to the System Error handler. If that is not true
+	 * then it will have to be fixed up here.
+	 */
+}