summaryrefslogtreecommitdiff
path: root/arch/powerpc
diff options
context:
space:
mode:
authorKumar Gala <galak@kernel.crashing.org>2007-03-16 08:46:55 -0500
committerKumar Gala <galak@kernel.crashing.org>2007-03-22 10:06:40 -0500
commitfd42c717510cd65529ccb46ccfa71fe4dde9fbd9 (patch)
treec8878ef641378605a06a5754fda5e50cc8470c8f /arch/powerpc
parent72e77a1b941e24e67f396246310438afbad9e6b3 (diff)
[POWERPC] Removed config options that we don't support in embedded6xx
When we started arch/powerpc we duplicated a number of config options from arch/ppc for various platforms that are supported. Now that we actually support a few platforms, remove all the ones that haven't been moved over. Additionally, this cleanup moved the 82xx/PQ2 options over into arch/powerpc/platforms/82xx/Kconfig where they belong. It also killed GEN550 which doesn't exist in arch/powerpc. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'arch/powerpc')
-rw-r--r--arch/powerpc/Kconfig.debug3
-rw-r--r--arch/powerpc/platforms/82xx/Kconfig35
-rw-r--r--arch/powerpc/platforms/embedded6xx/Kconfig264
3 files changed, 38 insertions, 264 deletions
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index d39d13327e6d..50f48f0c5630 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -132,8 +132,7 @@ config BOOTX_TEXT
config SERIAL_TEXT_DEBUG
bool "Support for early boot texts over serial port"
- depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \
- PPC_GEN550 || PPC_MPC52xx
+ depends on 4xx
config PPC_EARLY_DEBUG
bool "Early debugging (dangerous)"
diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig
index 47d841ecf2e2..411071686f20 100644
--- a/arch/powerpc/platforms/82xx/Kconfig
+++ b/arch/powerpc/platforms/82xx/Kconfig
@@ -18,4 +18,39 @@ config MPC82xx_ADS
endchoice
+config PQ2ADS
+ bool
+ depends on ADS8272
+ default y
+
+config ADS8272
+ bool
+
+config 8260
+ bool "CPM2 Support" if WILLOW
+ depends on 6xx
+ default y if PQ2FADS
+ help
+ The MPC8260 is a typical embedded CPU made by Motorola. Selecting
+ this option means that you wish to build a kernel for a machine with
+ an 8260 class CPU.
+
+config 8272
+ bool
+ depends on 6xx
+ default y if ADS8272
+ select 8260
+ help
+ The MPC8272 CPM has a different internal dpram setup than other CPM2
+ devices
+
+config CPM2
+ bool
+ depends on 8260 || MPC8560 || MPC8555
+ default y
+ help
+ The CPM2 (Communications Processor Module) is a coprocessor on
+ embedded CPUs made by Motorola. Selecting this option means that
+ you wish to build a kernel for a machine with a CPM2 coprocessor
+ on it (826x, 827x, 8560).
endmenu
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 3410bcbc9dbe..9557908ef545 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -2,78 +2,6 @@ choice
prompt "Machine Type"
depends on EMBEDDED6xx
-config KATANA
- bool "Artesyn-Katana"
- help
- Select KATANA if configuring an Artesyn KATANA 750i or 3750
- cPCI board.
-
-config WILLOW
- bool "Cogent-Willow"
-
-config CPCI690
- bool "Force-CPCI690"
- help
- Select CPCI690 if configuring a Force CPCI690 cPCI board.
-
-config POWERPMC250
- bool "Force-PowerPMC250"
-
-config CHESTNUT
- bool "IBM 750FX Eval board or 750GX Eval board"
- help
- Select CHESTNUT if configuring an IBM 750FX Eval Board or a
- IBM 750GX Eval board.
-
-config SPRUCE
- bool "IBM-Spruce"
- select PPC_INDIRECT_PCI
-
-config HDPU
- bool "Sky-HDPU"
- help
- Select HDPU if configuring a Sky Computers Compute Blade.
-
-config HDPU_FEATURES
- depends on HDPU
- tristate "HDPU-Features"
- help
- Select to enable HDPU enhanced features.
-
-config EV64260
- bool "Marvell-EV64260BP"
- help
- Select EV64260 if configuring a Marvell (formerly Galileo)
- EV64260BP Evaluation platform.
-
-config LOPEC
- bool "Motorola-LoPEC"
- select PPC_I8259
-
-config MVME5100
- bool "Motorola-MVME5100"
- select PPC_INDIRECT_PCI
-
-config PPLUS
- bool "Motorola-PowerPlus"
- select PPC_I8259
- select PPC_INDIRECT_PCI
-
-config PRPMC750
- bool "Motorola-PrPMC750"
- select PPC_INDIRECT_PCI
-
-config PRPMC800
- bool "Motorola-PrPMC800"
- select PPC_INDIRECT_PCI
-
-config SANDPOINT
- bool "Motorola-Sandpoint"
- select PPC_I8259
- help
- Select SANDPOINT if configuring for a Motorola Sandpoint X3
- (any flavor).
-
config LINKSTATION
bool "Linkstation / Kurobox(HG) from Buffalo"
select MPIC
@@ -97,212 +25,24 @@ config MPC7448HPC2
help
Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
platform
-
-config RADSTONE_PPC7D
- bool "Radstone Technology PPC7D board"
- select PPC_I8259
-
-config PAL4
- bool "SBS-Palomar4"
-
-config EST8260
- bool "EST8260"
- ---help---
- The EST8260 is a single-board computer manufactured by Wind River
- Systems, Inc. (formerly Embedded Support Tools Corp.) and based on
- the MPC8260. Wind River Systems has a website at
- <http://www.windriver.com/>, but the EST8260 cannot be found on it
- and has probably been discontinued or rebadged.
-
-config SBC82xx
- bool "SBC82xx"
- ---help---
- SBC PowerQUICC II, single-board computer with MPC82xx CPU
- Manufacturer: Wind River Systems, Inc.
- Date of Release: May 2003
- End of Life: -
- URL: <http://www.windriver.com/>
-
-config SBS8260
- bool "SBS8260"
-
-config RPX8260
- bool "RPXSUPER"
-
-config TQM8260
- bool "TQM8260"
- ---help---
- MPC8260 based module, little larger than credit card,
- up to 128 MB global + 64 MB local RAM, 32 MB Flash,
- 32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet,
- 2 x serial ports, ...
- Manufacturer: TQ Components, www.tq-group.de
- Date of Release: June 2001
- End of Life: not yet :-)
- URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
-
-config ADS8272
- bool "ADS8272"
-
-config PQ2FADS
- bool "Freescale-PQ2FADS"
- help
- Select PQ2FADS if you wish to configure for a Freescale
- PQ2FADS board (-VR or -ZU).
-
-config EV64360
- bool "Marvell-EV64360BP"
- help
- Select EV64360 if configuring a Marvell EV64360BP Evaluation
- platform.
endchoice
-config PQ2ADS
- bool
- depends on ADS8272
- default y
-
-config TQM8xxL
- bool
- depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
- default y
-
-config 8260
- bool "CPM2 Support" if WILLOW
- depends on 6xx
- default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS
- help
- The MPC8260 is a typical embedded CPU made by Motorola. Selecting
- this option means that you wish to build a kernel for a machine with
- an 8260 class CPU.
-
-config 8272
- bool
- depends on 6xx
- default y if ADS8272
- select 8260
- help
- The MPC8272 CPM has a different internal dpram setup than other CPM2
- devices
-
-config CPM2
- bool
- depends on 8260 || MPC8560 || MPC8555
- default y
- help
- The CPM2 (Communications Processor Module) is a coprocessor on
- embedded CPUs made by Motorola. Selecting this option means that
- you wish to build a kernel for a machine with a CPM2 coprocessor
- on it (826x, 827x, 8560).
-
-config PPC_GEN550
- bool
- depends on SANDPOINT || SPRUCE || PPLUS || \
- PRPMC750 || PRPMC800 || LOPEC || \
- (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
- 83xx || LINKSTATION
- default y
-
-config FORCE
- bool
- depends on 6xx && POWERPMC250
- default y
-
-config GT64260
- bool
- depends on EV64260 || CPCI690
- default y
-
-config MV64360 # Really MV64360 & MV64460
- bool
- depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360
- default y
-
-config MV64X60
- bool
- depends on (GT64260 || MV64360)
- select PPC_INDIRECT_PCI
- default y
-
config TSI108_BRIDGE
bool
depends on MPC7448HPC2
default y
-menu "Set bridge options"
- depends on MV64X60
-
-config NOT_COHERENT_CACHE
- bool "Turn off Cache Coherency"
- default n
- help
- Some 64x60 bridges lock up when trying to enforce cache coherency.
- When this option is selected, cache coherency will be turned off.
- Note that this can cause other problems (e.g., stale data being
- speculatively loaded via a cached mapping). Use at your own risk.
-
-config MV64X60_BASE
- hex "Set bridge base used by firmware"
- default "0xf1000000"
- help
- A firmware can leave the base address of the bridge's registers at
- a non-standard location. If so, set this value to reflect the
- address of that non-standard location.
-
-config MV64X60_NEW_BASE
- hex "Set bridge base used by kernel"
- default "0xf1000000"
- help
- If the current base address of the bridge's registers is not where
- you want it, set this value to the address that you want it moved to.
-
-endmenu
-
-config NONMONARCH_SUPPORT
- bool "Enable Non-Monarch Support"
- depends on PRPMC800
-
-config HARRIER
- bool
- depends on PRPMC800
- default y
-
-config EPIC_SERIAL_MODE
- bool
- depends on 6xx && (LOPEC || SANDPOINT)
- default y
-
config MPC10X_BRIDGE
bool
- depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION
+ depends on LINKSTATION
select PPC_INDIRECT_PCI
default y
config MPC10X_OPENPIC
bool
- depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION
+ depends on LINKSTATION
default y
config MPC10X_STORE_GATHERING
bool "Enable MPC10x store gathering"
depends on MPC10X_BRIDGE
-
-config SANDPOINT_ENABLE_UART1
- bool "Enable DUART mode on Sandpoint"
- depends on SANDPOINT
- help
- If this option is enabled then the MPC824x processor will run
- in DUART mode instead of UART mode.
-
-config HARRIER_STORE_GATHERING
- bool "Enable Harrier store gathering"
- depends on HARRIER
-
-config MVME5100_IPMC761_PRESENT
- bool "MVME5100 configured with an IPMC761"
- depends on MVME5100
- select PPC_I8259
-
-config SPRUCE_BAUD_33M
- bool "Spruce baud clock support"
- depends on SPRUCE