summaryrefslogtreecommitdiff
path: root/arch/ppc/platforms/85xx
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /arch/ppc/platforms/85xx
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'arch/ppc/platforms/85xx')
-rw-r--r--arch/ppc/platforms/85xx/Kconfig76
-rw-r--r--arch/ppc/platforms/85xx/Makefile8
-rw-r--r--arch/ppc/platforms/85xx/mpc8540_ads.c218
-rw-r--r--arch/ppc/platforms/85xx/mpc8540_ads.h25
-rw-r--r--arch/ppc/platforms/85xx/mpc8555_cds.h26
-rw-r--r--arch/ppc/platforms/85xx/mpc8560_ads.c210
-rw-r--r--arch/ppc/platforms/85xx/mpc8560_ads.h27
-rw-r--r--arch/ppc/platforms/85xx/mpc85xx_ads_common.c225
-rw-r--r--arch/ppc/platforms/85xx/mpc85xx_ads_common.h50
-rw-r--r--arch/ppc/platforms/85xx/mpc85xx_cds_common.c467
-rw-r--r--arch/ppc/platforms/85xx/mpc85xx_cds_common.h80
-rw-r--r--arch/ppc/platforms/85xx/sbc8560.c227
-rw-r--r--arch/ppc/platforms/85xx/sbc8560.h49
-rw-r--r--arch/ppc/platforms/85xx/sbc85xx.c203
-rw-r--r--arch/ppc/platforms/85xx/sbc85xx.h55
-rw-r--r--arch/ppc/platforms/85xx/stx_gp3.c355
-rw-r--r--arch/ppc/platforms/85xx/stx_gp3.h74
17 files changed, 2375 insertions, 0 deletions
diff --git a/arch/ppc/platforms/85xx/Kconfig b/arch/ppc/platforms/85xx/Kconfig
new file mode 100644
index 000000000000..ff92e38e7da1
--- /dev/null
+++ b/arch/ppc/platforms/85xx/Kconfig
@@ -0,0 +1,76 @@
+config 85xx
+ bool
+ depends on E500
+ default y
+
+config PPC_INDIRECT_PCI_BE
+ bool
+ depends on 85xx
+ default y
+
+menu "Freescale 85xx options"
+ depends on E500
+
+choice
+ prompt "Machine Type"
+ depends on 85xx
+ default MPC8540_ADS
+
+config MPC8540_ADS
+ bool "Freescale MPC8540 ADS"
+ help
+ This option enables support for the MPC 8540 ADS evaluation board.
+
+config MPC8555_CDS
+ bool "Freescale MPC8555 CDS"
+ help
+ This option enablese support for the MPC8555 CDS evaluation board.
+
+config MPC8560_ADS
+ bool "Freescale MPC8560 ADS"
+ help
+ This option enables support for the MPC 8560 ADS evaluation board.
+
+config SBC8560
+ bool "WindRiver PowerQUICC III SBC8560"
+ help
+ This option enables support for the WindRiver PowerQUICC III
+ SBC8560 board.
+
+config STX_GP3
+ bool "Silicon Turnkey Express GP3"
+ help
+ This option enables support for the Silicon Turnkey Express GP3
+ board.
+
+endchoice
+
+# It's often necessary to know the specific 85xx processor type.
+# Fortunately, it is implied (so far) from the board type, so we
+# don't need to ask more redundant questions.
+config MPC8540
+ bool
+ depends on MPC8540_ADS
+ default y
+
+config MPC8555
+ bool
+ depends on MPC8555_CDS
+ default y
+
+config MPC8560
+ bool
+ depends on SBC8560 || MPC8560_ADS || STX_GP3
+ default y
+
+config 85xx_PCI2
+ bool "Supprt for 2nd PCI host controller"
+ depends on MPC8555_CDS
+ default y
+
+config PPC_GEN550
+ bool
+ depends on MPC8540 || SBC8560 || MPC8555
+ default y
+
+endmenu
diff --git a/arch/ppc/platforms/85xx/Makefile b/arch/ppc/platforms/85xx/Makefile
new file mode 100644
index 000000000000..854fbd298ba2
--- /dev/null
+++ b/arch/ppc/platforms/85xx/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the PowerPC 85xx linux kernel.
+#
+obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads_common.o mpc8540_ads.o
+obj-$(CONFIG_MPC8555_CDS) += mpc85xx_cds_common.o
+obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads_common.o mpc8560_ads.o
+obj-$(CONFIG_SBC8560) += sbc85xx.o sbc8560.o
+obj-$(CONFIG_STX_GP3) += stx_gp3.o
diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c
new file mode 100644
index 000000000000..4d857d6d633d
--- /dev/null
+++ b/arch/ppc/platforms/85xx/mpc8540_ads.c
@@ -0,0 +1,218 @@
+/*
+ * arch/ppc/platforms/85xx/mpc8540_ads.c
+ *
+ * MPC8540ADS board specific routines
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2004 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/serial.h>
+#include <linux/tty.h> /* for linux/serial_core.h */
+#include <linux/serial_core.h>
+#include <linux/initrd.h>
+#include <linux/module.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/open_pic.h>
+#include <asm/bootinfo.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc85xx.h>
+#include <asm/irq.h>
+#include <asm/immap_85xx.h>
+#include <asm/kgdb.h>
+#include <asm/ppc_sys.h>
+#include <mm/mmu_decl.h>
+
+#include <syslib/ppc85xx_setup.h>
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init
+mpc8540ads_setup_arch(void)
+{
+ bd_t *binfo = (bd_t *) __res;
+ unsigned int freq;
+ struct gianfar_platform_data *pdata;
+
+ /* get the core frequency */
+ freq = binfo->bi_intfreq;
+
+ if (ppc_md.progress)
+ ppc_md.progress("mpc8540ads_setup_arch()", 0);
+
+ /* Set loops_per_jiffy to a half-way reasonable value,
+ for use until calibrate_delay gets called. */
+ loops_per_jiffy = freq / HZ;
+
+#ifdef CONFIG_PCI
+ /* setup PCI host bridges */
+ mpc85xx_setup_hose();
+#endif
+
+#ifdef CONFIG_SERIAL_8250
+ mpc85xx_early_serial_map();
+#endif
+
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+ /* Invalidate the entry we stole earlier the serial ports
+ * should be properly mapped */
+ invalidate_tlbcam_entry(NUM_TLBCAMS - 1);
+#endif
+
+ /* setup the board related information for the enet controllers */
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->interruptPHY = MPC85xx_IRQ_EXT5;
+ pdata->phyid = 0;
+ /* fixup phy address */
+ pdata->phy_reg_addr += binfo->bi_immr_base;
+ memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
+
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->interruptPHY = MPC85xx_IRQ_EXT5;
+ pdata->phyid = 1;
+ /* fixup phy address */
+ pdata->phy_reg_addr += binfo->bi_immr_base;
+ memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
+
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_FEC);
+ pdata->board_flags = 0;
+ pdata->interruptPHY = MPC85xx_IRQ_EXT5;
+ pdata->phyid = 3;
+ /* fixup phy address */
+ pdata->phy_reg_addr += binfo->bi_immr_base;
+ memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6);
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
+#endif
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+}
+
+/* ************************************************************************ */
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ /* parse_bootinfo must always be called first */
+ parse_bootinfo(find_bootinfo());
+
+ /*
+ * If we were passed in a board information, copy it into the
+ * residual data area.
+ */
+ if (r3) {
+ memcpy((void *) __res, (void *) (r3 + KERNELBASE),
+ sizeof (bd_t));
+ }
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+ {
+ bd_t *binfo = (bd_t *) __res;
+ struct uart_port p;
+
+ /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */
+ settlbcam(NUM_TLBCAMS - 1, binfo->bi_immr_base,
+ binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0);
+
+ memset(&p, 0, sizeof (p));
+ p.iotype = SERIAL_IO_MEM;
+ p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET;
+ p.uartclk = binfo->bi_busfreq;
+
+ gen550_init(0, &p);
+
+ memset(&p, 0, sizeof (p));
+ p.iotype = SERIAL_IO_MEM;
+ p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET;
+ p.uartclk = binfo->bi_busfreq;
+
+ gen550_init(1, &p);
+ }
+#endif
+
+#if defined(CONFIG_BLK_DEV_INITRD)
+ /*
+ * If the init RAM disk has been configured in, and there's a valid
+ * starting address for it, set it up.
+ */
+ if (r4) {
+ initrd_start = r4 + KERNELBASE;
+ initrd_end = r5 + KERNELBASE;
+ }
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+ /* Copy the kernel command line arguments to a safe place. */
+
+ if (r6) {
+ *(char *) (r7 + KERNELBASE) = 0;
+ strcpy(cmd_line, (char *) (r6 + KERNELBASE));
+ }
+
+ identify_ppc_sys_by_id(mfspr(SPRN_SVR));
+
+ /* setup the PowerPC module struct */
+ ppc_md.setup_arch = mpc8540ads_setup_arch;
+ ppc_md.show_cpuinfo = mpc85xx_ads_show_cpuinfo;
+
+ ppc_md.init_IRQ = mpc85xx_ads_init_IRQ;
+ ppc_md.get_irq = openpic_get_irq;
+
+ ppc_md.restart = mpc85xx_restart;
+ ppc_md.power_off = mpc85xx_power_off;
+ ppc_md.halt = mpc85xx_halt;
+
+ ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory;
+
+ ppc_md.time_init = NULL;
+ ppc_md.set_rtc_time = NULL;
+ ppc_md.get_rtc_time = NULL;
+ ppc_md.calibrate_decr = mpc85xx_calibrate_decr;
+
+#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
+ ppc_md.progress = gen550_progress;
+#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
+
+ if (ppc_md.progress)
+ ppc_md.progress("mpc8540ads_init(): exit", 0);
+
+ return;
+}
diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.h b/arch/ppc/platforms/85xx/mpc8540_ads.h
new file mode 100644
index 000000000000..3d05d7c4a938
--- /dev/null
+++ b/arch/ppc/platforms/85xx/mpc8540_ads.h
@@ -0,0 +1,25 @@
+/*
+ * arch/ppc/platforms/85xx/mpc8540_ads.h
+ *
+ * MPC8540ADS board definitions
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2004 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MACH_MPC8540ADS_H__
+#define __MACH_MPC8540ADS_H__
+
+#include <linux/config.h>
+#include <linux/initrd.h>
+#include <syslib/ppc85xx_setup.h>
+#include <platforms/85xx/mpc85xx_ads_common.h>
+
+#endif /* __MACH_MPC8540ADS_H__ */
diff --git a/arch/ppc/platforms/85xx/mpc8555_cds.h b/arch/ppc/platforms/85xx/mpc8555_cds.h
new file mode 100644
index 000000000000..e0e75568bc57
--- /dev/null
+++ b/arch/ppc/platforms/85xx/mpc8555_cds.h
@@ -0,0 +1,26 @@
+/*
+ * arch/ppc/platforms/mpc8555_cds.h
+ *
+ * MPC8555CDS board definitions
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2004 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MACH_MPC8555CDS_H__
+#define __MACH_MPC8555CDS_H__
+
+#include <linux/config.h>
+#include <syslib/ppc85xx_setup.h>
+#include <platforms/85xx/mpc85xx_cds_common.h>
+
+#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET)
+
+#endif /* __MACH_MPC8555CDS_H__ */
diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.c b/arch/ppc/platforms/85xx/mpc8560_ads.c
new file mode 100644
index 000000000000..761b8c7b25d2
--- /dev/null
+++ b/arch/ppc/platforms/85xx/mpc8560_ads.c
@@ -0,0 +1,210 @@
+/*
+ * arch/ppc/platforms/85xx/mpc8560_ads.c
+ *
+ * MPC8560ADS board specific routines
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2004 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/serial.h>
+#include <linux/tty.h> /* for linux/serial_core.h */
+#include <linux/serial_core.h>
+#include <linux/initrd.h>
+#include <linux/module.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/open_pic.h>
+#include <asm/bootinfo.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc85xx.h>
+#include <asm/irq.h>
+#include <asm/immap_85xx.h>
+#include <asm/kgdb.h>
+#include <asm/ppc_sys.h>
+#include <asm/cpm2.h>
+#include <mm/mmu_decl.h>
+
+#include <syslib/cpm2_pic.h>
+#include <syslib/ppc85xx_common.h>
+#include <syslib/ppc85xx_setup.h>
+
+extern void cpm2_reset(void);
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+
+static void __init
+mpc8560ads_setup_arch(void)
+{
+ bd_t *binfo = (bd_t *) __res;
+ unsigned int freq;
+ struct gianfar_platform_data *pdata;
+
+ cpm2_reset();
+
+ /* get the core frequency */
+ freq = binfo->bi_intfreq;
+
+ if (ppc_md.progress)
+ ppc_md.progress("mpc8560ads_setup_arch()", 0);
+
+ /* Set loops_per_jiffy to a half-way reasonable value,
+ for use until calibrate_delay gets called. */
+ loops_per_jiffy = freq / HZ;
+
+#ifdef CONFIG_PCI
+ /* setup PCI host bridges */
+ mpc85xx_setup_hose();
+#endif
+
+ /* setup the board related information for the enet controllers */
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->interruptPHY = MPC85xx_IRQ_EXT5;
+ pdata->phyid = 0;
+ /* fixup phy address */
+ pdata->phy_reg_addr += binfo->bi_immr_base;
+ memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
+
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->interruptPHY = MPC85xx_IRQ_EXT5;
+ pdata->phyid = 1;
+ /* fixup phy address */
+ pdata->phy_reg_addr += binfo->bi_immr_base;
+ memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
+#endif
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+}
+
+static irqreturn_t cpm2_cascade(int irq, void *dev_id, struct pt_regs *regs)
+{
+ while ((irq = cpm2_get_irq(regs)) >= 0)
+ __do_IRQ(irq, regs);
+ return IRQ_HANDLED;
+}
+
+static struct irqaction cpm2_irqaction = {
+ .handler = cpm2_cascade,
+ .flags = SA_INTERRUPT,
+ .mask = CPU_MASK_NONE,
+ .name = "cpm2_cascade",
+};
+
+static void __init
+mpc8560_ads_init_IRQ(void)
+{
+ /* Setup OpenPIC */
+ mpc85xx_ads_init_IRQ();
+
+ /* Setup CPM2 PIC */
+ cpm2_init_IRQ();
+
+ setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction);
+
+ return;
+}
+
+
+
+/* ************************************************************************ */
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ /* parse_bootinfo must always be called first */
+ parse_bootinfo(find_bootinfo());
+
+ /*
+ * If we were passed in a board information, copy it into the
+ * residual data area.
+ */
+ if (r3) {
+ memcpy((void *) __res, (void *) (r3 + KERNELBASE),
+ sizeof (bd_t));
+
+ }
+#if defined(CONFIG_BLK_DEV_INITRD)
+ /*
+ * If the init RAM disk has been configured in, and there's a valid
+ * starting address for it, set it up.
+ */
+ if (r4) {
+ initrd_start = r4 + KERNELBASE;
+ initrd_end = r5 + KERNELBASE;
+ }
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+ /* Copy the kernel command line arguments to a safe place. */
+
+ if (r6) {
+ *(char *) (r7 + KERNELBASE) = 0;
+ strcpy(cmd_line, (char *) (r6 + KERNELBASE));
+ }
+
+ identify_ppc_sys_by_id(mfspr(SPRN_SVR));
+
+ /* setup the PowerPC module struct */
+ ppc_md.setup_arch = mpc8560ads_setup_arch;
+ ppc_md.show_cpuinfo = mpc85xx_ads_show_cpuinfo;
+
+ ppc_md.init_IRQ = mpc8560_ads_init_IRQ;
+ ppc_md.get_irq = openpic_get_irq;
+
+ ppc_md.restart = mpc85xx_restart;
+ ppc_md.power_off = mpc85xx_power_off;
+ ppc_md.halt = mpc85xx_halt;
+
+ ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory;
+
+ ppc_md.time_init = NULL;
+ ppc_md.set_rtc_time = NULL;
+ ppc_md.get_rtc_time = NULL;
+ ppc_md.calibrate_decr = mpc85xx_calibrate_decr;
+
+ if (ppc_md.progress)
+ ppc_md.progress("mpc8560ads_init(): exit", 0);
+
+ return;
+}
diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.h b/arch/ppc/platforms/85xx/mpc8560_ads.h
new file mode 100644
index 000000000000..7df885d73e9d
--- /dev/null
+++ b/arch/ppc/platforms/85xx/mpc8560_ads.h
@@ -0,0 +1,27 @@
+/*
+ * arch/ppc/platforms/mpc8560_ads.h
+ *
+ * MPC8540ADS board definitions
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2004 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MACH_MPC8560ADS_H
+#define __MACH_MPC8560ADS_H
+
+#include <linux/config.h>
+#include <syslib/ppc85xx_setup.h>
+#include <platforms/85xx/mpc85xx_ads_common.h>
+
+#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET)
+#define PHY_INTERRUPT MPC85xx_IRQ_EXT7
+
+#endif /* __MACH_MPC8560ADS_H */
diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c
new file mode 100644
index 000000000000..ba9f9f562c45
--- /dev/null
+++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c
@@ -0,0 +1,225 @@
+/*
+ * arch/ppc/platforms/85xx/mpc85xx_ads_common.c
+ *
+ * MPC85xx ADS board common routines
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2004 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/serial.h>
+#include <linux/module.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/open_pic.h>
+#include <asm/bootinfo.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc85xx.h>
+#include <asm/irq.h>
+#include <asm/immap_85xx.h>
+#include <asm/ppc_sys.h>
+
+#include <mm/mmu_decl.h>
+
+#include <platforms/85xx/mpc85xx_ads_common.h>
+
+#ifndef CONFIG_PCI
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+#endif
+
+extern unsigned long total_memory; /* in mm/init */
+
+unsigned char __res[sizeof (bd_t)];
+
+/* Internal interrupts are all Level Sensitive, and Positive Polarity */
+
+static u_char mpc85xx_ads_openpic_initsenses[] __initdata = {
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: L2 Cache */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: ECM */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCI/PCI-X */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: RIO Inbound Port Write Error */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: RIO Doorbell Inbound */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: RIO Outbound Message */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: RIO Inbound Message */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 0 Transmit */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 0 Receive */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 0 Receive/Transmit Error */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 1 Transmit */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 1 Receive */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 1 Receive/Transmit Error */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Fast Ethernet */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: CPM */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */
+ 0x0, /* External 0: */
+#if defined(CONFIG_PCI)
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI slot 0 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI slot 1 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI slot 2 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 4: PCI slot 3 */
+#else
+ 0x0, /* External 1: */
+ 0x0, /* External 2: */
+ 0x0, /* External 3: */
+ 0x0, /* External 4: */
+#endif
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */
+ 0x0, /* External 6: */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 7: PHY */
+ 0x0, /* External 8: */
+ 0x0, /* External 9: */
+ 0x0, /* External 10: */
+ 0x0, /* External 11: */
+};
+
+/* ************************************************************************ */
+int
+mpc85xx_ads_show_cpuinfo(struct seq_file *m)
+{
+ uint pvid, svid, phid1;
+ uint memsize = total_memory;
+ bd_t *binfo = (bd_t *) __res;
+ unsigned int freq;
+
+ /* get the core frequency */
+ freq = binfo->bi_intfreq;
+
+ pvid = mfspr(SPRN_PVR);
+ svid = mfspr(SPRN_SVR);
+
+ seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
+ seq_printf(m, "Machine\t\t: mpc%sads\n", cur_ppc_sys_spec->ppc_sys_name);
+ seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000);
+ seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
+ seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+ /* Display cpu Pll setting */
+ phid1 = mfspr(SPRN_HID1);
+ seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
+
+ /* Display the amount of memory */
+ seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+
+ return 0;
+}
+
+void __init
+mpc85xx_ads_init_IRQ(void)
+{
+ bd_t *binfo = (bd_t *) __res;
+ /* Determine the Physical Address of the OpenPIC regs */
+ phys_addr_t OpenPIC_PAddr =
+ binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
+ OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE);
+ OpenPIC_InitSenses = mpc85xx_ads_openpic_initsenses;
+ OpenPIC_NumInitSenses = sizeof (mpc85xx_ads_openpic_initsenses);
+
+ /* Skip reserved space and internal sources */
+ openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
+ /* Map PIC IRQs 0-11 */
+ openpic_set_sources(32, 12, OpenPIC_Addr + 0x10000);
+
+ /* we let openpic interrupts starting from an offset, to
+ * leave space for cascading interrupts underneath.
+ */
+ openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET);
+
+ return;
+}
+
+#ifdef CONFIG_PCI
+/*
+ * interrupt routing
+ */
+
+int
+mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * This is little evil, but works around the fact
+ * that revA boards have IDSEL starting at 18
+ * and others boards (older) start at 12
+ *
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 2 */
+ {PIRQD, PIRQA, PIRQB, PIRQC},
+ {PIRQC, PIRQD, PIRQA, PIRQB},
+ {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 5 */
+ {0, 0, 0, 0}, /* -- */
+ {0, 0, 0, 0}, /* -- */
+ {0, 0, 0, 0}, /* -- */
+ {0, 0, 0, 0}, /* -- */
+ {0, 0, 0, 0}, /* -- */
+ {0, 0, 0, 0}, /* -- */
+ {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 12 */
+ {PIRQD, PIRQA, PIRQB, PIRQC},
+ {PIRQC, PIRQD, PIRQA, PIRQB},
+ {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 15 */
+ {0, 0, 0, 0}, /* -- */
+ {0, 0, 0, 0}, /* -- */
+ {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 18 */
+ {PIRQD, PIRQA, PIRQB, PIRQC},
+ {PIRQC, PIRQD, PIRQA, PIRQB},
+ {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 21 */
+ };
+
+ const long min_idsel = 2, max_idsel = 21, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+}
+
+int
+mpc85xx_exclude_device(u_char bus, u_char devfn)
+{
+ if (bus == 0 && PCI_SLOT(devfn) == 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ else
+ return PCIBIOS_SUCCESSFUL;
+}
+
+#endif /* CONFIG_PCI */
diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h
new file mode 100644
index 000000000000..3875e839cff7
--- /dev/null
+++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h
@@ -0,0 +1,50 @@
+/*
+ * arch/ppc/platforms/85xx/mpc85xx_ads_common.h
+ *
+ * MPC85XX ADS common board definitions
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2004 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MACH_MPC85XX_ADS_H__
+#define __MACH_MPC85XX_ADS_H__
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/seq_file.h>
+#include <asm/ppcboot.h>
+
+#define BOARD_CCSRBAR ((uint)0xe0000000)
+#define BCSR_ADDR ((uint)0xf8000000)
+#define BCSR_SIZE ((uint)(32 * 1024))
+
+extern int mpc85xx_ads_show_cpuinfo(struct seq_file *m);
+extern void mpc85xx_ads_init_IRQ(void) __init;
+extern void mpc85xx_ads_map_io(void) __init;
+
+/* PCI interrupt controller */
+#define PIRQA MPC85xx_IRQ_EXT1
+#define PIRQB MPC85xx_IRQ_EXT2
+#define PIRQC MPC85xx_IRQ_EXT3
+#define PIRQD MPC85xx_IRQ_EXT4
+
+#define MPC85XX_PCI1_LOWER_IO 0x00000000
+#define MPC85XX_PCI1_UPPER_IO 0x00ffffff
+
+#define MPC85XX_PCI1_LOWER_MEM 0x80000000
+#define MPC85XX_PCI1_UPPER_MEM 0x9fffffff
+
+#define MPC85XX_PCI1_IO_BASE 0xe2000000
+#define MPC85XX_PCI1_MEM_OFFSET 0x00000000
+
+#define MPC85XX_PCI1_IO_SIZE 0x01000000
+
+#endif /* __MACH_MPC85XX_ADS_H__ */
diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
new file mode 100644
index 000000000000..6c020d67ad70
--- /dev/null
+++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c
@@ -0,0 +1,467 @@
+/*
+ * arch/ppc/platform/85xx/mpc85xx_cds_common.c
+ *
+ * MPC85xx CDS board specific routines
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2004 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/serial.h>
+#include <linux/module.h>
+#include <linux/root_dev.h>
+#include <linux/initrd.h>
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/todc.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/open_pic.h>
+#include <asm/bootinfo.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc85xx.h>
+#include <asm/irq.h>
+#include <asm/immap_85xx.h>
+#include <asm/immap_cpm2.h>
+#include <asm/ppc_sys.h>
+#include <asm/kgdb.h>
+
+#include <mm/mmu_decl.h>
+#include <syslib/cpm2_pic.h>
+#include <syslib/ppc85xx_common.h>
+#include <syslib/ppc85xx_setup.h>
+
+
+#ifndef CONFIG_PCI
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+#endif
+
+extern unsigned long total_memory; /* in mm/init */
+
+unsigned char __res[sizeof (bd_t)];
+
+static int cds_pci_slot = 2;
+static volatile u8 * cadmus;
+
+/* Internal interrupts are all Level Sensitive, and Positive Polarity */
+
+static u_char mpc85xx_cds_openpic_initsenses[] __initdata = {
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: L2 Cache */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: ECM */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCI/PCI-X */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: RIO Inbound Port Write Error */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: RIO Doorbell Inbound */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: RIO Outbound Message */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: RIO Inbound Message */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 0 Transmit */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 0 Receive */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 0 Receive/Transmit Error */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 1 Transmit */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 1 Receive */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 1 Receive/Transmit Error */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Fast Ethernet */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: CPM */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */
+#if defined(CONFIG_PCI)
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 0: PCI1 slot */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI1 slot */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI1 slot */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI1 slot */
+#else
+ 0x0, /* External 0: */
+ 0x0, /* External 1: */
+ 0x0, /* External 2: */
+ 0x0, /* External 3: */
+#endif
+ 0x0, /* External 4: */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */
+ 0x0, /* External 6: */
+ 0x0, /* External 7: */
+ 0x0, /* External 8: */
+ 0x0, /* External 9: */
+ 0x0, /* External 10: */
+#if defined(CONFIG_85xx_PCI2) && defined(CONFIG_PCI)
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 11: PCI2 slot 0 */
+#else
+ 0x0, /* External 11: */
+#endif
+};
+
+/* ************************************************************************ */
+int
+mpc85xx_cds_show_cpuinfo(struct seq_file *m)
+{
+ uint pvid, svid, phid1;
+ uint memsize = total_memory;
+ bd_t *binfo = (bd_t *) __res;
+ unsigned int freq;
+
+ /* get the core frequency */
+ freq = binfo->bi_intfreq;
+
+ pvid = mfspr(SPRN_PVR);
+ svid = mfspr(SPRN_SVR);
+
+ seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
+ seq_printf(m, "Machine\t\t: CDS - MPC%s (%x)\n", cur_ppc_sys_spec->ppc_sys_name, cadmus[CM_VER]);
+ seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000);
+ seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
+ seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+ /* Display cpu Pll setting */
+ phid1 = mfspr(SPRN_HID1);
+ seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
+
+ /* Display the amount of memory */
+ seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+
+ return 0;
+}
+
+#ifdef CONFIG_CPM2
+static void cpm2_cascade(int irq, void *dev_id, struct pt_regs *regs)
+{
+ while((irq = cpm2_get_irq(regs)) >= 0)
+ __do_IRQ(irq, regs);
+}
+
+static struct irqaction cpm2_irqaction = {
+ .handler = cpm2_cascade,
+ .flags = SA_INTERRUPT,
+ .mask = CPU_MASK_NONE,
+ .name = "cpm2_cascade",
+};
+#endif /* CONFIG_CPM2 */
+
+void __init
+mpc85xx_cds_init_IRQ(void)
+{
+ bd_t *binfo = (bd_t *) __res;
+
+ /* Determine the Physical Address of the OpenPIC regs */
+ phys_addr_t OpenPIC_PAddr = binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
+ OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE);
+ OpenPIC_InitSenses = mpc85xx_cds_openpic_initsenses;
+ OpenPIC_NumInitSenses = sizeof (mpc85xx_cds_openpic_initsenses);
+
+ /* Skip reserved space and internal sources */
+ openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
+ /* Map PIC IRQs 0-11 */
+ openpic_set_sources(32, 12, OpenPIC_Addr + 0x10000);
+
+ /* we let openpic interrupts starting from an offset, to
+ * leave space for cascading interrupts underneath.
+ */
+ openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET);
+
+#ifdef CONFIG_CPM2
+ /* Setup CPM2 PIC */
+ cpm2_init_IRQ();
+
+ setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction);
+#endif
+
+ return;
+}
+
+#ifdef CONFIG_PCI
+/*
+ * interrupt routing
+ */
+int
+mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
+
+ if (!hose->index)
+ {
+ /* Handle PCI1 interrupts */
+ char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+
+ /* Note IRQ assignment for slots is based on which slot the elysium is
+ * in -- in this setup elysium is in slot #2 (this PIRQA as first
+ * interrupt on slot */
+ {
+ { 0, 1, 2, 3 }, /* 16 - PMC */
+ { 3, 0, 0, 0 }, /* 17 P2P (Tsi320) */
+ { 0, 1, 2, 3 }, /* 18 - Slot 1 */
+ { 1, 2, 3, 0 }, /* 19 - Slot 2 */
+ { 2, 3, 0, 1 }, /* 20 - Slot 3 */
+ { 3, 0, 1, 2 }, /* 21 - Slot 4 */
+ };
+
+ const long min_idsel = 16, max_idsel = 21, irqs_per_slot = 4;
+ int i, j;
+
+ for (i = 0; i < 6; i++)
+ for (j = 0; j < 4; j++)
+ pci_irq_table[i][j] =
+ ((pci_irq_table[i][j] + 5 -
+ cds_pci_slot) & 0x3) + PIRQ0A;
+
+ return PCI_IRQ_TABLE_LOOKUP;
+ } else {
+ /* Handle PCI2 interrupts (if we have one) */
+ char pci_irq_table[][4] =
+ {
+ /*
+ * We only have one slot and one interrupt
+ * going to PIRQA - PIRQD */
+ { PIRQ1A, PIRQ1A, PIRQ1A, PIRQ1A }, /* 21 - slot 0 */
+ };
+
+ const long min_idsel = 21, max_idsel = 21, irqs_per_slot = 4;
+
+ return PCI_IRQ_TABLE_LOOKUP;
+ }
+}
+
+#define ARCADIA_HOST_BRIDGE_IDSEL 17
+#define ARCADIA_2ND_BRIDGE_IDSEL 3
+
+extern int mpc85xx_pci1_last_busno;
+
+int
+mpc85xx_exclude_device(u_char bus, u_char devfn)
+{
+ if (bus == 0 && PCI_SLOT(devfn) == 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+#ifdef CONFIG_85xx_PCI2
+ if (mpc85xx_pci1_last_busno)
+ if (bus == (mpc85xx_pci1_last_busno + 1) && PCI_SLOT(devfn) == 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+#endif
+ /* We explicitly do not go past the Tundra 320 Bridge */
+ if (bus == 1)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ if ((bus == 0) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ else
+ return PCIBIOS_SUCCESSFUL;
+}
+#endif /* CONFIG_PCI */
+
+TODC_ALLOC();
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init
+mpc85xx_cds_setup_arch(void)
+{
+ bd_t *binfo = (bd_t *) __res;
+ unsigned int freq;
+ struct gianfar_platform_data *pdata;
+
+ /* get the core frequency */
+ freq = binfo->bi_intfreq;
+
+ printk("mpc85xx_cds_setup_arch\n");
+
+#ifdef CONFIG_CPM2
+ cpm2_reset();
+#endif
+
+ cadmus = ioremap(CADMUS_BASE, CADMUS_SIZE);
+ cds_pci_slot = ((cadmus[CM_CSR] >> 6) & 0x3) + 1;
+ printk("CDS Version = %x in PCI slot %d\n", cadmus[CM_VER], cds_pci_slot);
+
+ /* Setup TODC access */
+ TODC_INIT(TODC_TYPE_DS1743,
+ 0,
+ 0,
+ ioremap(CDS_RTC_ADDR, CDS_RTC_SIZE),
+ 8);
+
+ /* Set loops_per_jiffy to a half-way reasonable value,
+ for use until calibrate_delay gets called. */
+ loops_per_jiffy = freq / HZ;
+
+#ifdef CONFIG_PCI
+ /* setup PCI host bridges */
+ mpc85xx_setup_hose();
+#endif
+
+#ifdef CONFIG_SERIAL_8250
+ mpc85xx_early_serial_map();
+#endif
+
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+ /* Invalidate the entry we stole earlier the serial ports
+ * should be properly mapped */
+ invalidate_tlbcam_entry(NUM_TLBCAMS - 1);
+#endif
+
+ /* setup the board related information for the enet controllers */
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->interruptPHY = MPC85xx_IRQ_EXT5;
+ pdata->phyid = 0;
+ /* fixup phy address */
+ pdata->phy_reg_addr += binfo->bi_immr_base;
+ memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
+
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->interruptPHY = MPC85xx_IRQ_EXT5;
+ pdata->phyid = 1;
+ /* fixup phy address */
+ pdata->phy_reg_addr += binfo->bi_immr_base;
+ memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
+
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
+#endif
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+}
+
+/* ************************************************************************ */
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ /* parse_bootinfo must always be called first */
+ parse_bootinfo(find_bootinfo());
+
+ /*
+ * If we were passed in a board information, copy it into the
+ * residual data area.
+ */
+ if (r3) {
+ memcpy((void *) __res, (void *) (r3 + KERNELBASE),
+ sizeof (bd_t));
+
+ }
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+ {
+ bd_t *binfo = (bd_t *) __res;
+ struct uart_port p;
+
+ /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */
+ settlbcam(NUM_TLBCAMS - 1, binfo->bi_immr_base,
+ binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0);
+
+ memset(&p, 0, sizeof (p));
+ p.iotype = SERIAL_IO_MEM;
+ p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET;
+ p.uartclk = binfo->bi_busfreq;
+
+ gen550_init(0, &p);
+
+ memset(&p, 0, sizeof (p));
+ p.iotype = SERIAL_IO_MEM;
+ p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET;
+ p.uartclk = binfo->bi_busfreq;
+
+ gen550_init(1, &p);
+ }
+#endif
+
+#if defined(CONFIG_BLK_DEV_INITRD)
+ /*
+ * If the init RAM disk has been configured in, and there's a valid
+ * starting address for it, set it up.
+ */
+ if (r4) {
+ initrd_start = r4 + KERNELBASE;
+ initrd_end = r5 + KERNELBASE;
+ }
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+ /* Copy the kernel command line arguments to a safe place. */
+
+ if (r6) {
+ *(char *) (r7 + KERNELBASE) = 0;
+ strcpy(cmd_line, (char *) (r6 + KERNELBASE));
+ }
+
+ identify_ppc_sys_by_id(mfspr(SPRN_SVR));
+
+ /* setup the PowerPC module struct */
+ ppc_md.setup_arch = mpc85xx_cds_setup_arch;
+ ppc_md.show_cpuinfo = mpc85xx_cds_show_cpuinfo;
+
+ ppc_md.init_IRQ = mpc85xx_cds_init_IRQ;
+ ppc_md.get_irq = openpic_get_irq;
+
+ ppc_md.restart = mpc85xx_restart;
+ ppc_md.power_off = mpc85xx_power_off;
+ ppc_md.halt = mpc85xx_halt;
+
+ ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory;
+
+ ppc_md.calibrate_decr = mpc85xx_calibrate_decr;
+
+ ppc_md.time_init = todc_time_init;
+ ppc_md.set_rtc_time = todc_set_rtc_time;
+ ppc_md.get_rtc_time = todc_get_rtc_time;
+
+ ppc_md.nvram_read_val = todc_direct_read_val;
+ ppc_md.nvram_write_val = todc_direct_write_val;
+
+#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
+ ppc_md.progress = gen550_progress;
+#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
+
+ if (ppc_md.progress)
+ ppc_md.progress("mpc85xx_cds_init(): exit", 0);
+
+ return;
+}
diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h
new file mode 100644
index 000000000000..7627d77504bd
--- /dev/null
+++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h
@@ -0,0 +1,80 @@
+/*
+ * arch/ppc/platforms/85xx/mpc85xx_cds_common.h
+ *
+ * MPC85xx CDS board definitions
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2004 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MACH_MPC85XX_CDS_H__
+#define __MACH_MPC85XX_CDS_H__
+
+#include <linux/config.h>
+#include <linux/serial.h>
+#include <asm/ppcboot.h>
+#include <linux/initrd.h>
+#include <syslib/ppc85xx_setup.h>
+
+#define BOARD_CCSRBAR ((uint)0xe0000000)
+#define CCSRBAR_SIZE ((uint)1024*1024)
+
+/* CADMUS info */
+#define CADMUS_BASE (0xf8004000)
+#define CADMUS_SIZE (256)
+#define CM_VER (0)
+#define CM_CSR (1)
+#define CM_RST (2)
+
+/* CDS NVRAM/RTC */
+#define CDS_RTC_ADDR (0xf8000000)
+#define CDS_RTC_SIZE (8 * 1024)
+
+/* PCI config */
+#define PCI1_CFG_ADDR_OFFSET (0x8000)
+#define PCI1_CFG_DATA_OFFSET (0x8004)
+
+#define PCI2_CFG_ADDR_OFFSET (0x9000)
+#define PCI2_CFG_DATA_OFFSET (0x9004)
+
+/* PCI interrupt controller */
+#define PIRQ0A MPC85xx_IRQ_EXT0
+#define PIRQ0B MPC85xx_IRQ_EXT1
+#define PIRQ0C MPC85xx_IRQ_EXT2
+#define PIRQ0D MPC85xx_IRQ_EXT3
+#define PIRQ1A MPC85xx_IRQ_EXT11
+
+/* PCI 1 memory map */
+#define MPC85XX_PCI1_LOWER_IO 0x00000000
+#define MPC85XX_PCI1_UPPER_IO 0x00ffffff
+
+#define MPC85XX_PCI1_LOWER_MEM 0x80000000
+#define MPC85XX_PCI1_UPPER_MEM 0x9fffffff
+
+#define MPC85XX_PCI1_IO_BASE 0xe2000000
+#define MPC85XX_PCI1_MEM_OFFSET 0x00000000
+
+#define MPC85XX_PCI1_IO_SIZE 0x01000000
+
+/* PCI 2 memory map */
+/* Note: the standard PPC fixups will cause IO space to get bumped by
+ * hose->io_base_virt - isa_io_base => MPC85XX_PCI1_IO_SIZE */
+#define MPC85XX_PCI2_LOWER_IO 0x00000000
+#define MPC85XX_PCI2_UPPER_IO 0x00ffffff
+
+#define MPC85XX_PCI2_LOWER_MEM 0xa0000000
+#define MPC85XX_PCI2_UPPER_MEM 0xbfffffff
+
+#define MPC85XX_PCI2_IO_BASE 0xe3000000
+#define MPC85XX_PCI2_MEM_OFFSET 0x00000000
+
+#define MPC85XX_PCI2_IO_SIZE 0x01000000
+
+#endif /* __MACH_MPC85XX_CDS_H__ */
diff --git a/arch/ppc/platforms/85xx/sbc8560.c b/arch/ppc/platforms/85xx/sbc8560.c
new file mode 100644
index 000000000000..9ab05e590c3e
--- /dev/null
+++ b/arch/ppc/platforms/85xx/sbc8560.c
@@ -0,0 +1,227 @@
+/*
+ * arch/ppc/platforms/85xx/sbc8560.c
+ *
+ * Wind River SBC8560 board specific routines
+ *
+ * Maintainer: Kumar Gala <kumar.gala@freescale.com>
+ *
+ * Copyright 2004 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/serial.h>
+#include <linux/tty.h> /* for linux/serial_core.h */
+#include <linux/serial_core.h>
+#include <linux/initrd.h>
+#include <linux/module.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/open_pic.h>
+#include <asm/bootinfo.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc85xx.h>
+#include <asm/irq.h>
+#include <asm/immap_85xx.h>
+#include <asm/kgdb.h>
+#include <asm/ppc_sys.h>
+#include <mm/mmu_decl.h>
+
+#include <syslib/ppc85xx_common.h>
+#include <syslib/ppc85xx_setup.h>
+
+#ifdef CONFIG_SERIAL_8250
+static void __init
+sbc8560_early_serial_map(void)
+{
+ struct uart_port uart_req;
+
+ /* Setup serial port access */
+ memset(&uart_req, 0, sizeof (uart_req));
+ uart_req.irq = MPC85xx_IRQ_EXT9;
+ uart_req.flags = STD_COM_FLAGS;
+ uart_req.uartclk = BASE_BAUD * 16;
+ uart_req.iotype = SERIAL_IO_MEM;
+ uart_req.mapbase = UARTA_ADDR;
+ uart_req.membase = ioremap(uart_req.mapbase, MPC85xx_UART0_SIZE);
+ uart_req.type = PORT_16650;
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+ gen550_init(0, &uart_req);
+#endif
+
+ if (early_serial_setup(&uart_req) != 0)
+ printk("Early serial init of port 0 failed\n");
+
+ /* Assume early_serial_setup() doesn't modify uart_req */
+ uart_req.line = 1;
+ uart_req.mapbase = UARTB_ADDR;
+ uart_req.membase = ioremap(uart_req.mapbase, MPC85xx_UART1_SIZE);
+ uart_req.irq = MPC85xx_IRQ_EXT10;
+
+#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
+ gen550_init(1, &uart_req);
+#endif
+
+ if (early_serial_setup(&uart_req) != 0)
+ printk("Early serial init of port 1 failed\n");
+}
+#endif
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init
+sbc8560_setup_arch(void)
+{
+ bd_t *binfo = (bd_t *) __res;
+ unsigned int freq;
+ struct gianfar_platform_data *pdata;
+
+ /* get the core frequency */
+ freq = binfo->bi_intfreq;
+
+ if (ppc_md.progress)
+ ppc_md.progress("sbc8560_setup_arch()", 0);
+
+ /* Set loops_per_jiffy to a half-way reasonable value,
+ for use until calibrate_delay gets called. */
+ loops_per_jiffy = freq / HZ;
+
+#ifdef CONFIG_PCI
+ /* setup PCI host bridges */
+ mpc85xx_setup_hose();
+#endif
+#ifdef CONFIG_SERIAL_8250
+ sbc8560_early_serial_map();
+#endif
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+ /* Invalidate the entry we stole earlier the serial ports
+ * should be properly mapped */
+ invalidate_tlbcam_entry(NUM_TLBCAMS - 1);
+#endif
+
+ /* setup the board related information for the enet controllers */
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->interruptPHY = MPC85xx_IRQ_EXT6;
+ pdata->phyid = 25;
+ /* fixup phy address */
+ pdata->phy_reg_addr += binfo->bi_immr_base;
+ memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
+
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
+ pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR;
+ pdata->interruptPHY = MPC85xx_IRQ_EXT7;
+ pdata->phyid = 26;
+ /* fixup phy address */
+ pdata->phy_reg_addr += binfo->bi_immr_base;
+ memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
+#endif
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+}
+
+/* ************************************************************************ */
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ /* parse_bootinfo must always be called first */
+ parse_bootinfo(find_bootinfo());
+
+ /*
+ * If we were passed in a board information, copy it into the
+ * residual data area.
+ */
+ if (r3) {
+ memcpy((void *) __res, (void *) (r3 + KERNELBASE),
+ sizeof (bd_t));
+ }
+
+#ifdef CONFIG_SERIAL_TEXT_DEBUG
+ /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */
+ settlbcam(NUM_TLBCAMS - 1, UARTA_ADDR,
+ UARTA_ADDR, 0x1000, _PAGE_IO, 0);
+#endif
+
+#if defined(CONFIG_BLK_DEV_INITRD)
+ /*
+ * If the init RAM disk has been configured in, and there's a valid
+ * starting address for it, set it up.
+ */
+ if (r4) {
+ initrd_start = r4 + KERNELBASE;
+ initrd_end = r5 + KERNELBASE;
+ }
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+ /* Copy the kernel command line arguments to a safe place. */
+
+ if (r6) {
+ *(char *) (r7 + KERNELBASE) = 0;
+ strcpy(cmd_line, (char *) (r6 + KERNELBASE));
+ }
+
+ identify_ppc_sys_by_id(mfspr(SPRN_SVR));
+
+ /* setup the PowerPC module struct */
+ ppc_md.setup_arch = sbc8560_setup_arch;
+ ppc_md.show_cpuinfo = sbc8560_show_cpuinfo;
+
+ ppc_md.init_IRQ = sbc8560_init_IRQ;
+ ppc_md.get_irq = openpic_get_irq;
+
+ ppc_md.restart = mpc85xx_restart;
+ ppc_md.power_off = mpc85xx_power_off;
+ ppc_md.halt = mpc85xx_halt;
+
+ ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory;
+
+ ppc_md.time_init = NULL;
+ ppc_md.set_rtc_time = NULL;
+ ppc_md.get_rtc_time = NULL;
+ ppc_md.calibrate_decr = mpc85xx_calibrate_decr;
+
+#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG)
+ ppc_md.progress = gen550_progress;
+#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */
+
+ if (ppc_md.progress)
+ ppc_md.progress("sbc8560_init(): exit", 0);
+}
diff --git a/arch/ppc/platforms/85xx/sbc8560.h b/arch/ppc/platforms/85xx/sbc8560.h
new file mode 100644
index 000000000000..5e1b00c77da5
--- /dev/null
+++ b/arch/ppc/platforms/85xx/sbc8560.h
@@ -0,0 +1,49 @@
+/*
+ * arch/ppc/platforms/85xx/sbc8560.h
+ *
+ * Wind River SBC8560 board definitions
+ *
+ * Copyright 2003 Motorola Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MACH_SBC8560_H__
+#define __MACH_SBC8560_H__
+
+#include <linux/config.h>
+#include <platforms/85xx/sbc85xx.h>
+
+#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET)
+
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define RS_TABLE_SIZE 64
+#else
+#define RS_TABLE_SIZE 2
+#endif
+
+/* Rate for the 1.8432 Mhz clock for the onboard serial chip */
+#define BASE_BAUD ( 1843200 / 16 )
+
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS (ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ)
+#else
+#define STD_COM_FLAGS (ASYNC_SKIP_TEST)
+#endif
+
+#define STD_SERIAL_PORT_DFNS \
+ { 0, BASE_BAUD, UARTA_ADDR, MPC85xx_IRQ_EXT9, STD_COM_FLAGS, /* ttyS0 */ \
+ iomem_base: (u8 *)UARTA_ADDR, \
+ io_type: SERIAL_IO_MEM }, \
+ { 0, BASE_BAUD, UARTB_ADDR, MPC85xx_IRQ_EXT10, STD_COM_FLAGS, /* ttyS1 */ \
+ iomem_base: (u8 *)UARTB_ADDR, \
+ io_type: SERIAL_IO_MEM },
+
+#define SERIAL_PORT_DFNS \
+ STD_SERIAL_PORT_DFNS
+
+#endif /* __MACH_SBC8560_H__ */
diff --git a/arch/ppc/platforms/85xx/sbc85xx.c b/arch/ppc/platforms/85xx/sbc85xx.c
new file mode 100644
index 000000000000..2d638c1c1bd6
--- /dev/null
+++ b/arch/ppc/platforms/85xx/sbc85xx.c
@@ -0,0 +1,203 @@
+/*
+ * arch/ppc/platform/85xx/sbc85xx.c
+ *
+ * WindRiver PowerQUICC III SBC85xx board common routines
+ *
+ * Copyright 2002, 2003 Motorola Inc.
+ * Copyright 2004 Red Hat, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/serial.h>
+#include <linux/module.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/open_pic.h>
+#include <asm/bootinfo.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc85xx.h>
+#include <asm/irq.h>
+#include <asm/immap_85xx.h>
+#include <asm/ppc_sys.h>
+
+#include <mm/mmu_decl.h>
+
+#include <platforms/85xx/sbc85xx.h>
+
+unsigned char __res[sizeof (bd_t)];
+
+#ifndef CONFIG_PCI
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+unsigned long pci_dram_offset = 0;
+#endif
+
+extern unsigned long total_memory; /* in mm/init */
+
+/* Internal interrupts are all Level Sensitive, and Positive Polarity */
+
+static u_char sbc8560_openpic_initsenses[] __initdata = {
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: L2 Cache */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: ECM */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCI/PCI-X */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: RIO Inbound Port Write Error */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: RIO Doorbell Inbound */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: RIO Outbound Message */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: RIO Inbound Message */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 0 Transmit */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 0 Receive */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 0 Receive/Transmit Error */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 1 Transmit */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 1 Receive */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 1 Receive/Transmit Error */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Fast Ethernet */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: CPM */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */
+ 0x0, /* External 0: */
+ 0x0, /* External 1: */
+#if defined(CONFIG_PCI)
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI slot 0 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI slot 1 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 4: PCI slot 2 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PCI slot 3 */
+#else
+ 0x0, /* External 2: */
+ 0x0, /* External 3: */
+ 0x0, /* External 4: */
+ 0x0, /* External 5: */
+#endif
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 6: PHY */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 7: PHY */
+ 0x0, /* External 8: */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* External 9: PHY */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* External 10: PHY */
+ 0x0, /* External 11: */
+};
+
+/* ************************************************************************ */
+int
+sbc8560_show_cpuinfo(struct seq_file *m)
+{
+ uint pvid, svid, phid1;
+ uint memsize = total_memory;
+ bd_t *binfo = (bd_t *) __res;
+ unsigned int freq;
+
+ /* get the core frequency */
+ freq = binfo->bi_intfreq;
+
+ pvid = mfspr(SPRN_PVR);
+ svid = mfspr(SPRN_SVR);
+
+ seq_printf(m, "Vendor\t\t: Wind River\n");
+ seq_printf(m, "Machine\t\t: SBC%s\n", cur_ppc_sys_spec->ppc_sys_name);
+ seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000);
+ seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
+ seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+ /* Display cpu Pll setting */
+ phid1 = mfspr(SPRN_HID1);
+ seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
+
+ /* Display the amount of memory */
+ seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+
+ return 0;
+}
+
+void __init
+sbc8560_init_IRQ(void)
+{
+ bd_t *binfo = (bd_t *) __res;
+ /* Determine the Physical Address of the OpenPIC regs */
+ phys_addr_t OpenPIC_PAddr =
+ binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
+ OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE);
+ OpenPIC_InitSenses = sbc8560_openpic_initsenses;
+ OpenPIC_NumInitSenses = sizeof (sbc8560_openpic_initsenses);
+
+ /* Skip reserved space and internal sources */
+ openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
+ /* Map PIC IRQs 0-11 */
+ openpic_set_sources(32, 12, OpenPIC_Addr + 0x10000);
+
+ /* we let openpic interrupts starting from an offset, to
+ * leave space for cascading interrupts underneath.
+ */
+ openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET);
+
+ return;
+}
+
+/*
+ * interrupt routing
+ */
+
+#ifdef CONFIG_PCI
+int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel,
+ unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ {PIRQA, PIRQB, PIRQC, PIRQD},
+ {PIRQD, PIRQA, PIRQB, PIRQC},
+ {PIRQC, PIRQD, PIRQA, PIRQB},
+ {PIRQB, PIRQC, PIRQD, PIRQA},
+ };
+
+ const long min_idsel = 12, max_idsel = 15, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+}
+
+int mpc85xx_exclude_device(u_char bus, u_char devfn)
+{
+ if (bus == 0 && PCI_SLOT(devfn) == 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ else
+ return PCIBIOS_SUCCESSFUL;
+}
+#endif /* CONFIG_PCI */
diff --git a/arch/ppc/platforms/85xx/sbc85xx.h b/arch/ppc/platforms/85xx/sbc85xx.h
new file mode 100644
index 000000000000..7af93c691a6b
--- /dev/null
+++ b/arch/ppc/platforms/85xx/sbc85xx.h
@@ -0,0 +1,55 @@
+/*
+ * arch/ppc/platforms/85xx/sbc85xx.h
+ *
+ * WindRiver PowerQUICC III SBC85xx common board definitions
+ *
+ * Copyright 2003 Motorola Inc.
+ * Copyright 2004 Red Hat, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __PLATFORMS_85XX_SBC85XX_H__
+#define __PLATFORMS_85XX_SBC85XX_H__
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/seq_file.h>
+#include <asm/ppcboot.h>
+
+#define BOARD_CCSRBAR ((uint)0xff700000)
+#define CCSRBAR_SIZE ((uint)1024*1024)
+
+#define BCSR_ADDR ((uint)0xfc000000)
+#define BCSR_SIZE ((uint)(16 * 1024 * 1024))
+
+#define UARTA_ADDR (BCSR_ADDR + 0x00700000)
+#define UARTB_ADDR (BCSR_ADDR + 0x00800000)
+#define RTC_DEVICE_ADDR (BCSR_ADDR + 0x00900000)
+#define EEPROM_ADDR (BCSR_ADDR + 0x00b00000)
+
+extern int sbc8560_show_cpuinfo(struct seq_file *m);
+extern void sbc8560_init_IRQ(void) __init;
+
+/* PCI interrupt controller */
+#define PIRQA MPC85xx_IRQ_EXT1
+#define PIRQB MPC85xx_IRQ_EXT2
+#define PIRQC MPC85xx_IRQ_EXT3
+#define PIRQD MPC85xx_IRQ_EXT4
+
+#define MPC85XX_PCI1_LOWER_IO 0x00000000
+#define MPC85XX_PCI1_UPPER_IO 0x00ffffff
+
+#define MPC85XX_PCI1_LOWER_MEM 0x80000000
+#define MPC85XX_PCI1_UPPER_MEM 0x9fffffff
+
+#define MPC85XX_PCI1_IO_BASE 0xe2000000
+#define MPC85XX_PCI1_MEM_OFFSET 0x00000000
+
+#define MPC85XX_PCI1_IO_SIZE 0x01000000
+
+#endif /* __PLATFORMS_85XX_SBC85XX_H__ */
diff --git a/arch/ppc/platforms/85xx/stx_gp3.c b/arch/ppc/platforms/85xx/stx_gp3.c
new file mode 100644
index 000000000000..bc95836e417c
--- /dev/null
+++ b/arch/ppc/platforms/85xx/stx_gp3.c
@@ -0,0 +1,355 @@
+/*
+ * arch/ppc/platforms/85xx/stx_gp3.c
+ *
+ * STx GP3 board specific routines
+ *
+ * Dan Malek <dan@embeddededge.com>
+ * Copyright 2004 Embedded Edge, LLC
+ *
+ * Copied from mpc8560_ads.c
+ * Copyright 2002, 2003 Motorola Inc.
+ *
+ * Ported to 2.6, Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2004-2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/blkdev.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/root_dev.h>
+#include <linux/seq_file.h>
+#include <linux/serial.h>
+#include <linux/initrd.h>
+#include <linux/module.h>
+#include <linux/fsl_devices.h>
+#include <linux/interrupt.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/open_pic.h>
+#include <asm/bootinfo.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc85xx.h>
+#include <asm/irq.h>
+#include <asm/immap_85xx.h>
+#include <asm/immap_cpm2.h>
+#include <asm/mpc85xx.h>
+#include <asm/ppc_sys.h>
+
+#include <syslib/cpm2_pic.h>
+#include <syslib/ppc85xx_common.h>
+
+extern void cpm2_reset(void);
+
+unsigned char __res[sizeof(bd_t)];
+
+#ifndef CONFIG_PCI
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+unsigned long pci_dram_offset = 0;
+#endif
+
+/* Internal interrupts are all Level Sensitive, and Positive Polarity */
+static u8 gp3_openpic_initsenses[] __initdata = {
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: L2 Cache */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: ECM */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCI/PCI-X */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: RIO Inbound Port Write Error */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: RIO Doorbell Inbound */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: RIO Outbound Message */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: RIO Inbound Message */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 0 Transmit */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 0 Receive */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 0 Receive/Transmit Error */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 1 Transmit */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 1 Receive */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 1 Receive/Transmit Error */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Fast Ethernet */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: CPM */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */
+ 0x0, /* External 0: */
+#if defined(CONFIG_PCI)
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI slot 0 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI slot 1 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI slot 2 */
+ (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 4: PCI slot 3 */
+#else
+ 0x0, /* External 1: */
+ 0x0, /* External 2: */
+ 0x0, /* External 3: */
+ 0x0, /* External 4: */
+#endif
+ 0x0, /* External 5: */
+ 0x0, /* External 6: */
+ 0x0, /* External 7: */
+ 0x0, /* External 8: */
+ 0x0, /* External 9: */
+ 0x0, /* External 10: */
+ 0x0, /* External 11: */
+};
+
+/*
+ * Setup the architecture
+ */
+static void __init
+gp3_setup_arch(void)
+{
+ bd_t *binfo = (bd_t *) __res;
+ unsigned int freq;
+ struct gianfar_platform_data *pdata;
+
+ cpm2_reset();
+
+ /* get the core frequency */
+ freq = binfo->bi_intfreq;
+
+ if (ppc_md.progress)
+ ppc_md.progress("gp3_setup_arch()", 0);
+
+ /* Set loops_per_jiffy to a half-way reasonable value,
+ for use until calibrate_delay gets called. */
+ loops_per_jiffy = freq / HZ;
+
+#ifdef CONFIG_PCI
+ /* setup PCI host bridges */
+ mpc85xx_setup_hose();
+#endif
+
+ /* setup the board related information for the enet controllers */
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1);
+/* pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; */
+ pdata->interruptPHY = MPC85xx_IRQ_EXT5;
+ pdata->phyid = 2;
+ pdata->phy_reg_addr += binfo->bi_immr_base;
+ memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6);
+
+ pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2);
+/* pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; */
+ pdata->interruptPHY = MPC85xx_IRQ_EXT5;
+ pdata->phyid = 4;
+ /* fixup phy address */
+ pdata->phy_reg_addr += binfo->bi_immr_base;
+ memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start)
+ ROOT_DEV = Root_RAM0;
+ else
+#endif
+#ifdef CONFIG_ROOT_NFS
+ ROOT_DEV = Root_NFS;
+#else
+ ROOT_DEV = Root_HDA1;
+#endif
+
+ printk ("bi_immr_base = %8.8lx\n", binfo->bi_immr_base);
+}
+
+static irqreturn_t cpm2_cascade(int irq, void *dev_id, struct pt_regs *regs)
+{
+ while ((irq = cpm2_get_irq(regs)) >= 0)
+ __do_IRQ(irq, regs);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction cpm2_irqaction = {
+ .handler = cpm2_cascade,
+ .flags = SA_INTERRUPT,
+ .mask = CPU_MASK_NONE,
+ .name = "cpm2_cascade",
+};
+
+static void __init
+gp3_init_IRQ(void)
+{
+ int i;
+ bd_t *binfo = (bd_t *) __res;
+
+ /*
+ * Setup OpenPIC
+ */
+
+ /* Determine the Physical Address of the OpenPIC regs */
+ phys_addr_t OpenPIC_PAddr =
+ binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
+ OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE);
+ OpenPIC_InitSenses = gp3_openpic_initsenses;
+ OpenPIC_NumInitSenses = sizeof (gp3_openpic_initsenses);
+
+ /* Skip reserved space and internal sources */
+ openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
+
+ /* Map PIC IRQs 0-11 */
+ openpic_set_sources(32, 12, OpenPIC_Addr + 0x10000);
+
+ /*
+ * Let openpic interrupts starting from an offset, to
+ * leave space for cascading interrupts underneath.
+ */
+ openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET);
+
+ /* Setup CPM2 PIC */
+ cpm2_init_IRQ();
+
+ setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction);
+
+ return;
+}
+
+static int
+gp3_show_cpuinfo(struct seq_file *m)
+{
+ uint pvid, svid, phid1;
+ bd_t *binfo = (bd_t *) __res;
+ uint memsize;
+ unsigned int freq;
+ extern unsigned long total_memory; /* in mm/init */
+
+ /* get the core frequency */
+ freq = binfo->bi_intfreq;
+
+ pvid = mfspr(SPRN_PVR);
+ svid = mfspr(SPRN_SVR);
+
+ memsize = total_memory;
+
+ seq_printf(m, "Vendor\t\t: RPC Electronics STx \n");
+ seq_printf(m, "Machine\t\t: GP3 - MPC%s\n", cur_ppc_sys_spec->ppc_sys_name);
+ seq_printf(m, "bus freq\t: %u.%.6u MHz\n", freq / 1000000,
+ freq % 1000000);
+ seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
+ seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+ /* Display cpu Pll setting */
+ phid1 = mfspr(SPRN_HID1);
+ seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
+
+ /* Display the amount of memory */
+ seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+
+ return 0;
+}
+
+#ifdef CONFIG_PCI
+int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel,
+ unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ {PIRQA, PIRQB, PIRQC, PIRQD},
+ {PIRQD, PIRQA, PIRQB, PIRQC},
+ {PIRQC, PIRQD, PIRQA, PIRQB},
+ {PIRQB, PIRQC, PIRQD, PIRQA},
+ };
+
+ const long min_idsel = 12, max_idsel = 15, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+}
+
+int mpc85xx_exclude_device(u_char bus, u_char devfn)
+{
+ if (bus == 0 && PCI_SLOT(devfn) == 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ else
+ return PCIBIOS_SUCCESSFUL;
+}
+#endif /* CONFIG_PCI */
+
+void __init
+platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ /* parse_bootinfo must always be called first */
+ parse_bootinfo(find_bootinfo());
+
+ /*
+ * If we were passed in a board information, copy it into the
+ * residual data area.
+ */
+ if (r3) {
+ memcpy((void *) __res, (void *) (r3 + KERNELBASE),
+ sizeof (bd_t));
+
+ }
+#if defined(CONFIG_BLK_DEV_INITRD)
+ /*
+ * If the init RAM disk has been configured in, and there's a valid
+ * starting address for it, set it up.
+ */
+ if (r4) {
+ initrd_start = r4 + KERNELBASE;
+ initrd_end = r5 + KERNELBASE;
+ }
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+ /* Copy the kernel command line arguments to a safe place. */
+
+ if (r6) {
+ *(char *) (r7 + KERNELBASE) = 0;
+ strcpy(cmd_line, (char *) (r6 + KERNELBASE));
+ }
+
+ identify_ppc_sys_by_id(mfspr(SPRN_SVR));
+
+ /* setup the PowerPC module struct */
+ ppc_md.setup_arch = gp3_setup_arch;
+ ppc_md.show_cpuinfo = gp3_show_cpuinfo;
+
+ ppc_md.init_IRQ = gp3_init_IRQ;
+ ppc_md.get_irq = openpic_get_irq;
+
+ ppc_md.restart = mpc85xx_restart;
+ ppc_md.power_off = mpc85xx_power_off;
+ ppc_md.halt = mpc85xx_halt;
+
+ ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory;
+
+ ppc_md.calibrate_decr = mpc85xx_calibrate_decr;
+
+ if (ppc_md.progress)
+ ppc_md.progress("platform_init(): exit", 0);
+
+ return;
+}
diff --git a/arch/ppc/platforms/85xx/stx_gp3.h b/arch/ppc/platforms/85xx/stx_gp3.h
new file mode 100644
index 000000000000..7bcc6c35a417
--- /dev/null
+++ b/arch/ppc/platforms/85xx/stx_gp3.h
@@ -0,0 +1,74 @@
+/*
+ * arch/ppc/platforms/stx8560_gp3.h
+ *
+ * STx GP3 board definitions
+ *
+ * Dan Malek (dan@embeddededge.com)
+ * Copyright 2004 Embedded Edge, LLC
+ *
+ * Ported to 2.6, Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2004-2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MACH_STX_GP3_H
+#define __MACH_STX_GP3_H
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/seq_file.h>
+#include <asm/ppcboot.h>
+
+#define BOARD_CCSRBAR ((uint)0xe0000000)
+#define CCSRBAR_SIZE ((uint)1024*1024)
+
+#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET)
+
+#define BCSR_ADDR ((uint)0xfc000000)
+#define BCSR_SIZE ((uint)(16 * 1024))
+
+#define BCSR_TSEC1_RESET 0x00000080
+#define BCSR_TSEC2_RESET 0x00000040
+#define BCSR_LED1 0x00000008
+#define BCSR_LED2 0x00000004
+#define BCSR_LED3 0x00000002
+#define BCSR_LED4 0x00000001
+
+extern void mpc85xx_setup_hose(void) __init;
+extern void mpc85xx_restart(char *cmd);
+extern void mpc85xx_power_off(void);
+extern void mpc85xx_halt(void);
+extern int mpc85xx_show_cpuinfo(struct seq_file *m);
+extern void mpc85xx_init_IRQ(void) __init;
+extern unsigned long mpc85xx_find_end_of_memory(void) __init;
+extern void mpc85xx_calibrate_decr(void) __init;
+
+#define PCI_CFG_ADDR_OFFSET (0x8000)
+#define PCI_CFG_DATA_OFFSET (0x8004)
+
+/* PCI interrupt controller */
+#define PIRQA MPC85xx_IRQ_EXT1
+#define PIRQB MPC85xx_IRQ_EXT2
+#define PIRQC MPC85xx_IRQ_EXT3
+#define PIRQD MPC85xx_IRQ_EXT4
+#define PCI_MIN_IDSEL 16
+#define PCI_MAX_IDSEL 19
+#define PCI_IRQ_SLOT 4
+
+#define MPC85XX_PCI1_LOWER_IO 0x00000000
+#define MPC85XX_PCI1_UPPER_IO 0x00ffffff
+
+#define MPC85XX_PCI1_LOWER_MEM 0x80000000
+#define MPC85XX_PCI1_UPPER_MEM 0x9fffffff
+
+#define MPC85XX_PCI1_IO_BASE 0xe2000000
+#define MPC85XX_PCI1_MEM_OFFSET 0x00000000
+
+#define MPC85XX_PCI1_IO_SIZE 0x01000000
+
+#endif /* __MACH_STX_GP3_H */