Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (187 commits)
  sh: remove dead LED code for migo-r and ms7724se
  sh: ecovec build fix for CONFIG_I2C=n
  sh: ecovec r-standby support
  sh: ms7724se r-standby support
  sh: SH-Mobile R-standby register save/restore
  clocksource: Fix up a registration/IRQ race in the sh drivers.
  sh: ms7724: modify scan_timing for KEYSC
  sh: ms7724: Add sh_sir support
  sh: mach-ecovec24: Add sh_sir support
  sh: wire up SET/GET_UNALIGN_CTL.
  sh: allow alignment fault mode to be configured at kernel boot.
  sh: sh7724: Update FSI/SPU2 clock
  sh: always enable sh7724 vpu_clk and set to 166MHz on Ecovec
  sh: add sh7724 kick callback to clk_div4_table
  sh: introduce struct clk_div4_table
  sh: clock-cpg div4 set_rate() shift fix
  sh: Turn on speculative return for SH7785 and SH7786
  sh: Merge legacy and dynamic PMB modes.
  sh: Use uncached I/O helpers in PMB setup.
  sh: Provide uncached I/O helpers.
  ...

1 files changed, 15 insertions, 17 deletions

diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
index e5a8a2fde39c..fe7e686c94ac 100644
--- a/arch/sh/boards/board-sh7785lcr.c
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -21,6 +21,7 @@
 #include <linux/i2c-algo-pca.h>
 #include <linux/usb/r8a66597.h>
 #include <linux/irq.h>
+#include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/errno.h>
 #include <mach/sh7785lcr.h>
@@ -32,26 +33,17 @@
  * NOTE: This board has 2 physical memory maps.
  *	 Please look at include/asm-sh/sh7785lcr.h or hardware manual.
  */
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= PLD_LEDCR,
-		.end	= PLD_LEDCR,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct heartbeat_data heartbeat_data = {
-	.regsize = 8,
+static struct resource heartbeat_resource = {
+	.start	= PLD_LEDCR,
+	.end	= PLD_LEDCR,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
 };
 
 static struct platform_device heartbeat_device = {
 	.name		= "heartbeat",
 	.id		= -1,
-	.dev	= {
-		.platform_data	= &heartbeat_data,
-	},
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
 };
 
 static struct mtd_partition nor_flash_partitions[] = {
@@ -341,8 +333,14 @@ static void __init sh7785lcr_setup(char **cmdline_p)
 	pm_power_off = sh7785lcr_power_off;
 
 	/* sm501 DRAM configuration */
-	sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
-	writel(0x000307c2, sm501_reg);
+	sm501_reg = ioremap_nocache(SM107_REG_ADDR, SM501_DRAM_CONTROL);
+	if (!sm501_reg) {
+		printk(KERN_ERR "%s: ioremap error.\n", __func__);
+		return;
+	}
+
+	writel(0x000307c2, sm501_reg + SM501_DRAM_CONTROL);
+	iounmap(sm501_reg);
 }
 
 /* Return the board specific boot mode pin configuration */