summaryrefslogtreecommitdiff
path: root/arch/sh/boards/se/7751/setup.c
diff options
context:
space:
mode:
authorPaul Mundt <lethal@linux-sh.org>2007-03-08 17:27:37 +0900
committerPaul Mundt <lethal@hera.kernel.org>2007-05-07 02:10:51 +0000
commitfa5da2f7bdcf885efe65a37df13907c7d72296f6 (patch)
tree54104d5f660a1ec824505b28540eb2c5e4be390a /arch/sh/boards/se/7751/setup.c
parent15700770ef7c5d12e2f1659d2ddbeb3f658d9f37 (diff)
sh: Bring kgdb back from the dead.
This code has suffered quite a bit of bitrot, do some basic tidying to get it to a reasonably functional state again. This gets the basic support and the console working again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Diffstat (limited to 'arch/sh/boards/se/7751/setup.c')
-rw-r--r--arch/sh/boards/se/7751/setup.c148
1 files changed, 0 insertions, 148 deletions
diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c
index e3feae6ec0bf..770defed9c4a 100644
--- a/arch/sh/boards/se/7751/setup.c
+++ b/arch/sh/boards/se/7751/setup.c
@@ -14,153 +14,6 @@
#include <asm/se7751.h>
#include <asm/io.h>
-void init_7751se_IRQ(void);
-
-#ifdef CONFIG_SH_KGDB
-#include <asm/kgdb.h>
-static int kgdb_uart_setup(void);
-static struct kgdb_sermap kgdb_uart_sermap =
-{ "ttyS", 0, kgdb_uart_setup, NULL };
-#endif
-
-/*
- * Initialize the board
- */
-static void __init sh7751se_setup(char **cmdline_p)
-{
- /* Call init_smsc() replacement to set up SuperIO. */
- /* XXX: RTC setting comes here */
-#ifdef CONFIG_SH_KGDB
- kgdb_register_sermap(&kgdb_uart_sermap);
-#endif
-}
-
-/*********************************************************************
- * Currently a hack (e.g. does not interact well w/serial.c, lots of *
- * hardcoded stuff) but may be useful if SCI/F needs debugging. *
- * Mostly copied from x86 code (see files asm-i386/kgdb_local.h and *
- * arch/i386/lib/kgdb_serial.c). *
- *********************************************************************/
-
-#ifdef CONFIG_SH_KGDB
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-
-#define COM1_PORT 0x3f8 /* Base I/O address */
-#define COM1_IRQ 4 /* IRQ not used yet */
-#define COM2_PORT 0x2f8 /* Base I/O address */
-#define COM2_IRQ 3 /* IRQ not used yet */
-
-#define SB_CLOCK 1843200 /* Serial baud clock */
-#define SB_BASE (SB_CLOCK/16)
-#define SB_MCR UART_MCR_OUT2 | UART_MCR_DTR | UART_MCR_RTS
-
-struct uart_port {
- int base;
-};
-#define UART_NPORTS 2
-struct uart_port uart_ports[] = {
- { COM1_PORT },
- { COM2_PORT },
-};
-struct uart_port *kgdb_uart_port;
-
-#define UART_IN(reg) inb_p(kgdb_uart_port->base + reg)
-#define UART_OUT(reg,v) outb_p((v), kgdb_uart_port->base + reg)
-
-/* Basic read/write functions for the UART */
-#define UART_LSR_RXCERR (UART_LSR_BI | UART_LSR_FE | UART_LSR_PE)
-static int kgdb_uart_getchar(void)
-{
- int lsr;
- int c = -1;
-
- while (c == -1) {
- lsr = UART_IN(UART_LSR);
- if (lsr & UART_LSR_DR)
- c = UART_IN(UART_RX);
- if ((lsr & UART_LSR_RXCERR))
- c = -1;
- }
- return c;
-}
-
-static void kgdb_uart_putchar(int c)
-{
- while ((UART_IN(UART_LSR) & UART_LSR_THRE) == 0)
- ;
- UART_OUT(UART_TX, c);
-}
-
-/*
- * Initialize UART to configured/requested values.
- * (But we don't interrupts yet, or interact w/serial.c)
- */
-static int kgdb_uart_setup(void)
-{
- int port;
- int lcr = 0;
- int bdiv = 0;
-
- if (kgdb_portnum >= UART_NPORTS) {
- KGDB_PRINTK("uart port %d invalid.\n", kgdb_portnum);
- return -1;
- }
-
- kgdb_uart_port = &uart_ports[kgdb_portnum];
-
- /* Init sequence from gdb_hook_interrupt */
- UART_IN(UART_RX);
- UART_OUT(UART_IER, 0);
-
- UART_IN(UART_RX); /* Serial driver comments say */
- UART_IN(UART_IIR); /* this clears interrupt regs */
- UART_IN(UART_MSR);
-
- /* Figure basic LCR values */
- switch (kgdb_bits) {
- case '7':
- lcr |= UART_LCR_WLEN7;
- break;
- default: case '8':
- lcr |= UART_LCR_WLEN8;
- break;
- }
- switch (kgdb_parity) {
- case 'O':
- lcr |= UART_LCR_PARITY;
- break;
- case 'E':
- lcr |= (UART_LCR_PARITY | UART_LCR_EPAR);
- break;
- default: break;
- }
-
- /* Figure the baud rate divisor */
- bdiv = (SB_BASE/kgdb_baud);
-
- /* Set the baud rate and LCR values */
- UART_OUT(UART_LCR, (lcr | UART_LCR_DLAB));
- UART_OUT(UART_DLL, (bdiv & 0xff));
- UART_OUT(UART_DLM, ((bdiv >> 8) & 0xff));
- UART_OUT(UART_LCR, lcr);
-
- /* Set the MCR */
- UART_OUT(UART_MCR, SB_MCR);
-
- /* Turn off FIFOs for now */
- UART_OUT(UART_FCR, 0);
-
- /* Setup complete: initialize function pointers */
- kgdb_getchar = kgdb_uart_getchar;
- kgdb_putchar = kgdb_uart_putchar;
-
- return 0;
-}
-#endif /* CONFIG_SH_KGDB */
-
static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
static struct resource heartbeat_resources[] = {
@@ -197,7 +50,6 @@ __initcall(se7751_devices_setup);
*/
struct sh_machine_vector mv_7751se __initmv = {
.mv_name = "7751 SolutionEngine",
- .mv_setup = sh7751se_setup,
.mv_nr_irqs = 72,
.mv_inb = sh7751se_inb,