sh: Move out the solution engine headers to arch/sh/include/mach-se/

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

1 files changed, 99 insertions, 0 deletions

diff --git a/arch/sh/include/mach-se/mach/se.h b/arch/sh/include/mach-se/mach/se.h
new file mode 100644
index 000000000000..eb23000e1bbe
--- /dev/null
+++ b/arch/sh/include/mach-se/mach/se.h
@@ -0,0 +1,99 @@
+#ifndef __ASM_SH_HITACHI_SE_H
+#define __ASM_SH_HITACHI_SE_H
+
+/*
+ * linux/include/asm-sh/hitachi_se.h
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine support
+ */
+
+/* Box specific addresses.  */
+
+#define PA_ROM		0x00000000	/* EPROM */
+#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_FROM		0x01000000	/* EPROM */
+#define PA_FROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_EXT1		0x04000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_EXT2		0x08000000
+#define PA_EXT2_SIZE	0x04000000
+#define PA_SDRAM	0x0c000000
+#define PA_SDRAM_SIZE	0x04000000
+
+#define PA_EXT4		0x12000000
+#define PA_EXT4_SIZE	0x02000000
+#define PA_EXT5		0x14000000
+#define PA_EXT5_SIZE	0x04000000
+#define PA_PCIC		0x18000000	/* MR-SHPC-01 PCMCIA */
+
+#define PA_83902	0xb0000000	/* DP83902A */
+#define PA_83902_IF	0xb0040000	/* DP83902A remote io port */
+#define PA_83902_RST	0xb0080000	/* DP83902A reset port */
+
+#define PA_SUPERIO	0xb0400000	/* SMC37C935A super io chip */
+#define PA_DIPSW0	0xb0800000	/* Dip switch 5,6 */
+#define PA_DIPSW1	0xb0800002	/* Dip switch 7,8 */
+#define PA_LED		0xb0c00000	/* LED */
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+#define PA_BCR		0xb0e00000
+#else
+#define PA_BCR		0xb1400000	/* FPGA */
+#endif
+
+#define PA_MRSHPC	0xb83fffe0	/* MR-SHPC-01 PCMCIA controller */
+#define PA_MRSHPC_MW1	0xb8400000	/* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2	0xb8500000	/* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO	0xb8600000	/* MR-SHPC-01 I/O window base */
+#define MRSHPC_OPTION   (PA_MRSHPC + 6)
+#define MRSHPC_CSR      (PA_MRSHPC + 8)
+#define MRSHPC_ISR      (PA_MRSHPC + 10)
+#define MRSHPC_ICR      (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
+#define MRSHPC_CDCR     (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+
+#define BCR_ILCRA	(PA_BCR + 0)
+#define BCR_ILCRB	(PA_BCR + 2)
+#define BCR_ILCRC	(PA_BCR + 4)
+#define BCR_ILCRD	(PA_BCR + 6)
+#define BCR_ILCRE	(PA_BCR + 8)
+#define BCR_ILCRF	(PA_BCR + 10)
+#define BCR_ILCRG	(PA_BCR + 12)
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+#define IRQ_STNIC	12
+#define IRQ_CFCARD	14
+#else
+#define IRQ_STNIC	10
+#define IRQ_CFCARD	7
+#endif
+
+/* SH Ether support (SH7710/SH7712) */
+/* Base address */
+#define SH_ETH0_BASE 0xA7000000
+#define SH_ETH1_BASE 0xA7000400
+/* PHY ID */
+#if defined(CONFIG_CPU_SUBTYPE_SH7710)
+# define PHY_ID 0x00
+#elif defined(CONFIG_CPU_SUBTYPE_SH7712)
+# define PHY_ID 0x01
+#endif
+/* Ether IRQ */
+#define SH_ETH0_IRQ	80
+#define SH_ETH1_IRQ	81
+#define SH_TSU_IRQ	82
+
+void init_se_IRQ(void);
+
+#define __IO_PREFIX	se
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_HITACHI_SE_H */