sh: Move over the SH-5 entry.S.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

3 files changed, 2107 insertions, 0 deletions

diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile
index d055a3ea6b4b..f471d242774e 100644
--- a/arch/sh/kernel/cpu/Makefile
+++ b/arch/sh/kernel/cpu/Makefile
@@ -6,8 +6,14 @@ obj-$(CONFIG_CPU_SH2)		= sh2/
 obj-$(CONFIG_CPU_SH2A)		= sh2a/
 obj-$(CONFIG_CPU_SH3)		= sh3/
 obj-$(CONFIG_CPU_SH4)		= sh4/
+obj-$(CONFIG_CPU_SH5)		= sh5/
+
+# Special cases for family ancestry.
+
 obj-$(CONFIG_CPU_SH4A)		+= sh4a/
 
+# Common interfaces.
+
 obj-$(CONFIG_UBC_WAKEUP)	+= ubc.o
 obj-$(CONFIG_SH_ADC)		+= adc.o
 
diff --git a/arch/sh/kernel/cpu/sh5/Makefile b/arch/sh/kernel/cpu/sh5/Makefile
new file mode 100644
index 000000000000..9778f9bdff3a
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh5/Makefile
@@ -0,0 +1 @@
+obj-y := entry.o
diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S
new file mode 100644
index 000000000000..2f505a7cb5f9
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh5/entry.S
@@ -0,0 +1,2100 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/kernel/entry.S
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2004, 2005  Paul Mundt
+ * Copyright (C) 2003, 2004 Richard Curnow
+ *
+ */
+#include <linux/errno.h>
+#include <linux/sys.h>
+#include <asm/cpu/registers.h>
+#include <asm/processor.h>
+#include <asm/unistd.h>
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
+
+/*
+ * SR fields.
+ */
+#define SR_ASID_MASK	0x00ff0000
+#define SR_FD_MASK	0x00008000
+#define SR_SS		0x08000000
+#define SR_BL		0x10000000
+#define SR_MD		0x40000000
+
+/*
+ * Event code.
+ */
+#define	EVENT_INTERRUPT		0
+#define	EVENT_FAULT_TLB		1
+#define	EVENT_FAULT_NOT_TLB	2
+#define	EVENT_DEBUG		3
+
+/* EXPEVT values */
+#define	RESET_CAUSE		0x20
+#define DEBUGSS_CAUSE		0x980
+
+/*
+ * Frame layout. Quad index.
+ */
+#define	FRAME_T(x)	FRAME_TBASE+(x*8)
+#define	FRAME_R(x)	FRAME_RBASE+(x*8)
+#define	FRAME_S(x)	FRAME_SBASE+(x*8)
+#define FSPC		0
+#define FSSR		1
+#define FSYSCALL_ID	2
+
+/* Arrange the save frame to be a multiple of 32 bytes long */
+#define FRAME_SBASE	0
+#define FRAME_RBASE	(FRAME_SBASE+(3*8))	/* SYSCALL_ID - SSR - SPC */
+#define FRAME_TBASE	(FRAME_RBASE+(63*8))	/* r0 - r62 */
+#define FRAME_PBASE	(FRAME_TBASE+(8*8))	/* tr0 -tr7 */
+#define	FRAME_SIZE	(FRAME_PBASE+(2*8))	/* pad0-pad1 */
+
+#define FP_FRAME_SIZE	FP_FRAME_BASE+(33*8)	/* dr0 - dr31 + fpscr */
+#define FP_FRAME_BASE	0
+
+#define	SAVED_R2	0*8
+#define	SAVED_R3	1*8
+#define	SAVED_R4	2*8
+#define	SAVED_R5	3*8
+#define	SAVED_R18	4*8
+#define	SAVED_R6	5*8
+#define	SAVED_TR0	6*8
+
+/* These are the registers saved in the TLB path that aren't saved in the first
+   level of the normal one. */
+#define	TLB_SAVED_R25	7*8
+#define	TLB_SAVED_TR1	8*8
+#define	TLB_SAVED_TR2	9*8
+#define	TLB_SAVED_TR3	10*8
+#define	TLB_SAVED_TR4	11*8
+/* Save R0/R1 : PT-migrating compiler currently dishounours -ffixed-r0 and -ffixed-r1 causing
+   breakage otherwise. */
+#define	TLB_SAVED_R0	12*8
+#define	TLB_SAVED_R1	13*8
+
+#define CLI()				\
+	getcon	SR, r6;			\
+	ori	r6, 0xf0, r6;		\
+	putcon	r6, SR;
+
+#define STI()				\
+	getcon	SR, r6;			\
+	andi	r6, ~0xf0, r6;		\
+	putcon	r6, SR;
+
+#ifdef CONFIG_PREEMPT
+#  define preempt_stop()	CLI()
+#else
+#  define preempt_stop()
+#  define resume_kernel		restore_all
+#endif
+
+	.section	.data, "aw"
+
+#define FAST_TLBMISS_STACK_CACHELINES 4
+#define FAST_TLBMISS_STACK_QUADWORDS (4*FAST_TLBMISS_STACK_CACHELINES)
+
+/* Register back-up area for all exceptions */
+	.balign	32
+	/* Allow for 16 quadwords to be pushed by fast tlbmiss handling
+	 * register saves etc. */
+	.fill FAST_TLBMISS_STACK_QUADWORDS, 8, 0x0
+/* This is 32 byte aligned by construction */
+/* Register back-up area for all exceptions */
+reg_save_area:
+	.quad	0
+	.quad	0
+	.quad	0
+	.quad	0
+
+	.quad	0
+	.quad	0
+	.quad	0
+	.quad	0
+
+	.quad	0
+	.quad	0
+	.quad	0
+	.quad	0
+
+	.quad	0
+	.quad   0
+
+/* Save area for RESVEC exceptions. We cannot use reg_save_area because of
+ * reentrancy. Note this area may be accessed via physical address.
+ * Align so this fits a whole single cache line, for ease of purging.
+ */
+	.balign 32,0,32
+resvec_save_area:
+	.quad	0
+	.quad	0
+	.quad	0
+	.quad	0
+	.quad	0
+	.balign 32,0,32
+
+/* Jump table of 3rd level handlers  */
+trap_jtable:
+	.long	do_exception_error		/* 0x000 */
+	.long	do_exception_error		/* 0x020 */
+	.long	tlb_miss_load				/* 0x040 */
+	.long	tlb_miss_store				/* 0x060 */
+	! ARTIFICIAL pseudo-EXPEVT setting
+	.long	do_debug_interrupt		/* 0x080 */
+	.long	tlb_miss_load				/* 0x0A0 */
+	.long	tlb_miss_store				/* 0x0C0 */
+	.long	do_address_error_load	/* 0x0E0 */
+	.long	do_address_error_store	/* 0x100 */
+#ifdef CONFIG_SH_FPU
+	.long	do_fpu_error		/* 0x120 */
+#else
+	.long	do_exception_error		/* 0x120 */
+#endif
+	.long	do_exception_error		/* 0x140 */
+	.long	system_call				/* 0x160 */
+	.long	do_reserved_inst		/* 0x180 */
+	.long	do_illegal_slot_inst	/* 0x1A0 */
+	.long	do_NMI			/* 0x1C0 */
+	.long	do_exception_error		/* 0x1E0 */
+	.rept 15
+		.long do_IRQ		/* 0x200 - 0x3C0 */
+	.endr
+	.long	do_exception_error		/* 0x3E0 */
+	.rept 32
+		.long do_IRQ		/* 0x400 - 0x7E0 */
+	.endr
+	.long	fpu_error_or_IRQA			/* 0x800 */
+	.long	fpu_error_or_IRQB			/* 0x820 */
+	.long	do_IRQ			/* 0x840 */
+	.long	do_IRQ			/* 0x860 */
+	.rept 6
+		.long do_exception_error	/* 0x880 - 0x920 */
+	.endr
+	.long	do_software_break_point	/* 0x940 */
+	.long	do_exception_error		/* 0x960 */
+	.long	do_single_step		/* 0x980 */
+
+	.rept 3
+		.long do_exception_error	/* 0x9A0 - 0x9E0 */
+	.endr
+	.long	do_IRQ			/* 0xA00 */
+	.long	do_IRQ			/* 0xA20 */
+	.long	itlb_miss_or_IRQ			/* 0xA40 */
+	.long	do_IRQ			/* 0xA60 */
+	.long	do_IRQ			/* 0xA80 */
+	.long	itlb_miss_or_IRQ			/* 0xAA0 */
+	.long	do_exception_error		/* 0xAC0 */
+	.long	do_address_error_exec	/* 0xAE0 */
+	.rept 8
+		.long do_exception_error	/* 0xB00 - 0xBE0 */
+	.endr
+	.rept 18
+		.long do_IRQ		/* 0xC00 - 0xE20 */
+	.endr
+
+	.section	.text64, "ax"
+
+/*
+ * --- Exception/Interrupt/Event Handling Section
+ */
+
+/*
+ * VBR and RESVEC blocks.
+ *
+ * First level handler for VBR-based exceptions.
+ *
+ * To avoid waste of space, align to the maximum text block size.
+ * This is assumed to be at most 128 bytes or 32 instructions.
+ * DO NOT EXCEED 32 instructions on the first level handlers !
+ *
+ * Also note that RESVEC is contained within the VBR block
+ * where the room left (1KB - TEXT_SIZE) allows placing
+ * the RESVEC block (at most 512B + TEXT_SIZE).
+ *
+ * So first (and only) level handler for RESVEC-based exceptions.
+ *
+ * Where the fault/interrupt is handled (not_a_tlb_miss, tlb_miss
+ * and interrupt) we are a lot tight with register space until
+ * saving onto the stack frame, which is done in handle_exception().
+ *
+ */
+
+#define	TEXT_SIZE 	128
+#define	BLOCK_SIZE 	1664 		/* Dynamic check, 13*128 */
+
+	.balign TEXT_SIZE
+LVBR_block:
+	.space	256, 0			/* Power-on class handler, */
+					/* not required here       */
+not_a_tlb_miss:
+	synco	/* TAKum03020 (but probably a good idea anyway.) */
+	/* Save original stack pointer into KCR1 */
+	putcon	SP, KCR1
+
+	/* Save other original registers into reg_save_area */
+        movi  reg_save_area, SP
+	st.q	SP, SAVED_R2, r2
+	st.q	SP, SAVED_R3, r3
+	st.q	SP, SAVED_R4, r4
+	st.q	SP, SAVED_R5, r5
+	st.q	SP, SAVED_R6, r6
+	st.q	SP, SAVED_R18, r18
+	gettr	tr0, r3
+	st.q	SP, SAVED_TR0, r3
+
+	/* Set args for Non-debug, Not a TLB miss class handler */
+	getcon	EXPEVT, r2
+	movi	ret_from_exception, r3
+	ori	r3, 1, r3
+	movi	EVENT_FAULT_NOT_TLB, r4
+	or	SP, ZERO, r5
+	getcon	KCR1, SP
+	pta	handle_exception, tr0
+	blink	tr0, ZERO
+
+	.balign 256
+	! VBR+0x200
+	nop
+	.balign 256
+	! VBR+0x300
+	nop
+	.balign 256
+	/*
+	 * Instead of the natural .balign 1024 place RESVEC here
+	 * respecting the final 1KB alignment.
+	 */
+	.balign TEXT_SIZE
+	/*
+	 * Instead of '.space 1024-TEXT_SIZE' place the RESVEC
+	 * block making sure the final alignment is correct.
+	 */
+tlb_miss:
+	synco	/* TAKum03020 (but probably a good idea anyway.) */
+	putcon	SP, KCR1
+	movi	reg_save_area, SP
+	/* SP is guaranteed 32-byte aligned. */
+	st.q	SP, TLB_SAVED_R0 , r0
+	st.q	SP, TLB_SAVED_R1 , r1
+	st.q	SP, SAVED_R2 , r2
+	st.q	SP, SAVED_R3 , r3
+	st.q	SP, SAVED_R4 , r4
+	st.q	SP, SAVED_R5 , r5
+	st.q	SP, SAVED_R6 , r6
+	st.q	SP, SAVED_R18, r18
+
+	/* Save R25 for safety; as/ld may want to use it to achieve the call to
+	 * the code in mm/tlbmiss.c */
+	st.q	SP, TLB_SAVED_R25, r25
+	gettr	tr0, r2
+	gettr	tr1, r3
+	gettr	tr2, r4
+	gettr	tr3, r5
+	gettr	tr4, r18
+	st.q	SP, SAVED_TR0 , r2
+	st.q	SP, TLB_SAVED_TR1 , r3
+	st.q	SP, TLB_SAVED_TR2 , r4
+	st.q	SP, TLB_SAVED_TR3 , r5
+	st.q	SP, TLB_SAVED_TR4 , r18
+
+	pt	do_fast_page_fault, tr0
+	getcon	SSR, r2
+	getcon	EXPEVT, r3
+	getcon	TEA, r4
+	shlri	r2, 30, r2
+	andi	r2, 1, r2	/* r2 = SSR.MD */
+	blink 	tr0, LINK
+
+	pt	fixup_to_invoke_general_handler, tr1
+
+	/* If the fast path handler fixed the fault, just drop through quickly
+	   to the restore code right away to return to the excepting context.
+	   */
+	beqi/u	r2, 0, tr1
+
+fast_tlb_miss_restore:
+	ld.q	SP, SAVED_TR0, r2
+	ld.q	SP, TLB_SAVED_TR1, r3
+	ld.q	SP, TLB_SAVED_TR2, r4
+
+	ld.q	SP, TLB_SAVED_TR3, r5
+	ld.q	SP, TLB_SAVED_TR4, r18
+
+	ptabs	r2, tr0
+	ptabs	r3, tr1
+	ptabs	r4, tr2
+	ptabs	r5, tr3
+	ptabs	r18, tr4
+
+	ld.q	SP, TLB_SAVED_R0, r0
+	ld.q	SP, TLB_SAVED_R1, r1
+	ld.q	SP, SAVED_R2, r2
+	ld.q	SP, SAVED_R3, r3
+	ld.q	SP, SAVED_R4, r4
+	ld.q	SP, SAVED_R5, r5
+	ld.q	SP, SAVED_R6, r6
+	ld.q	SP, SAVED_R18, r18
+	ld.q	SP, TLB_SAVED_R25, r25
+
+	getcon	KCR1, SP
+	rte
+	nop /* for safety, in case the code is run on sh5-101 cut1.x */
+
+fixup_to_invoke_general_handler:
+
+	/* OK, new method.  Restore stuff that's not expected to get saved into
+	   the 'first-level' reg save area, then just fall through to setting
+	   up the registers and calling the second-level handler. */
+
+	/* 2nd level expects r2,3,4,5,6,18,tr0 to be saved.  So we must restore
+	   r25,tr1-4 and save r6 to get into the right state.  */
+
+	ld.q	SP, TLB_SAVED_TR1, r3
+	ld.q	SP, TLB_SAVED_TR2, r4
+	ld.q	SP, TLB_SAVED_TR3, r5
+	ld.q	SP, TLB_SAVED_TR4, r18
+	ld.q	SP, TLB_SAVED_R25, r25
+
+	ld.q	SP, TLB_SAVED_R0, r0
+	ld.q	SP, TLB_SAVED_R1, r1
+
+	ptabs/u	r3, tr1
+	ptabs/u	r4, tr2
+	ptabs/u	r5, tr3
+	ptabs/u	r18, tr4
+
+	/* Set args for Non-debug, TLB miss class handler */
+	getcon	EXPEVT, r2
+	movi	ret_from_exception, r3
+	ori	r3, 1, r3
+	movi	EVENT_FAULT_TLB, r4
+	or	SP, ZERO, r5
+	getcon	KCR1, SP
+	pta	handle_exception, tr0
+	blink	tr0, ZERO
+
+/* NB TAKE GREAT CARE HERE TO ENSURE THAT THE INTERRUPT CODE
+   DOES END UP AT VBR+0x600 */
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+
+	.balign 256
+	/* VBR + 0x600 */
+
+interrupt:
+	synco	/* TAKum03020 (but probably a good idea anyway.) */
+	/* Save original stack pointer into KCR1 */
+	putcon	SP, KCR1
+
+	/* Save other original registers into reg_save_area */
+        movi  reg_save_area, SP
+	st.q	SP, SAVED_R2, r2
+	st.q	SP, SAVED_R3, r3
+	st.q	SP, SAVED_R4, r4
+	st.q	SP, SAVED_R5, r5
+	st.q	SP, SAVED_R6, r6
+	st.q	SP, SAVED_R18, r18
+	gettr	tr0, r3
+	st.q	SP, SAVED_TR0, r3
+
+	/* Set args for interrupt class handler */
+	getcon	INTEVT, r2
+	movi	ret_from_irq, r3
+	ori	r3, 1, r3
+	movi	EVENT_INTERRUPT, r4
+	or	SP, ZERO, r5
+	getcon	KCR1, SP
+	pta	handle_exception, tr0
+	blink	tr0, ZERO
+	.balign	TEXT_SIZE		/* let's waste the bare minimum */
+
+LVBR_block_end:				/* Marker. Used for total checking */
+
+	.balign 256
+LRESVEC_block:
+	/* Panic handler. Called with MMU off. Possible causes/actions:
+	 * - Reset:		Jump to program start.
+	 * - Single Step:	Turn off Single Step & return.
+	 * - Others:		Call panic handler, passing PC as arg.
+	 *			(this may need to be extended...)
+	 */
+reset_or_panic:
+	synco	/* TAKum03020 (but probably a good idea anyway.) */
+	putcon	SP, DCR
+	/* First save r0-1 and tr0, as we need to use these */
+	movi	resvec_save_area-CONFIG_CACHED_MEMORY_OFFSET, SP
+	st.q	SP, 0, r0
+	st.q	SP, 8, r1
+	gettr	tr0, r0
+	st.q	SP, 32, r0
+
+	/* Check cause */
+	getcon	EXPEVT, r0
+	movi	RESET_CAUSE, r1
+	sub	r1, r0, r1		/* r1=0 if reset */
+	movi	_stext-CONFIG_CACHED_MEMORY_OFFSET, r0
+	ori	r0, 1, r0
+	ptabs	r0, tr0
+	beqi	r1, 0, tr0		/* Jump to start address if reset */
+
+	getcon	EXPEVT, r0
+	movi	DEBUGSS_CAUSE, r1
+	sub	r1, r0, r1		/* r1=0 if single step */
+	pta	single_step_panic, tr0
+	beqi	r1, 0, tr0		/* jump if single step */
+
+	/* Now jump to where we save the registers. */
+	movi	panic_stash_regs-CONFIG_CACHED_MEMORY_OFFSET, r1
+	ptabs	r1, tr0
+	blink	tr0, r63
+
+single_step_panic:
+	/* We are in a handler with Single Step set. We need to resume the
+	 * handler, by turning on MMU & turning off Single Step. */
+	getcon	SSR, r0
+	movi	SR_MMU, r1
+	or	r0, r1, r0
+	movi	~SR_SS, r1
+	and	r0, r1, r0
+	putcon	r0, SSR
+	/* Restore EXPEVT, as the rte won't do this */
+	getcon	PEXPEVT, r0
+	putcon	r0, EXPEVT
+	/* Restore regs */
+	ld.q	SP, 32, r0
+	ptabs	r0, tr0
+	ld.q	SP, 0, r0
+	ld.q	SP, 8, r1
+	getcon	DCR, SP
+	synco
+	rte
+
+
+	.balign	256
+debug_exception:
+	synco	/* TAKum03020 (but probably a good idea anyway.) */
+	/*
+	 * Single step/software_break_point first level handler.
+	 * Called with MMU off, so the first thing we do is enable it
+	 * by doing an rte with appropriate SSR.
+	 */
+	putcon	SP, DCR
+	/* Save SSR & SPC, together with R0 & R1, as we need to use 2 regs. */
+	movi	resvec_save_area-CONFIG_CACHED_MEMORY_OFFSET, SP
+
+	/* With the MMU off, we are bypassing the cache, so purge any
+         * data that will be made stale by the following stores.
+         */
+	ocbp	SP, 0
+	synco
+
+	st.q	SP, 0, r0
+	st.q	SP, 8, r1
+	getcon	SPC, r0
+	st.q	SP, 16, r0
+	getcon	SSR, r0
+	st.q	SP, 24, r0
+
+	/* Enable MMU, block exceptions, set priv mode, disable single step */
+	movi	SR_MMU | SR_BL | SR_MD, r1
+	or	r0, r1, r0
+	movi	~SR_SS, r1
+	and	r0, r1, r0
+	putcon	r0, SSR
+	/* Force control to debug_exception_2 when rte is executed */
+	movi	debug_exeception_2, r0
+	ori	r0, 1, r0      /* force SHmedia, just in case */
+	putcon	r0, SPC
+	getcon	DCR, SP
+	synco
+	rte
+debug_exeception_2:
+	/* Restore saved regs */
+	putcon	SP, KCR1
+	movi	resvec_save_area, SP
+	ld.q	SP, 24, r0
+	putcon	r0, SSR
+	ld.q	SP, 16, r0
+	putcon	r0, SPC
+	ld.q	SP, 0, r0
+	ld.q	SP, 8, r1
+
+	/* Save other original registers into reg_save_area */
+        movi  reg_save_area, SP
+	st.q	SP, SAVED_R2, r2
+	st.q	SP, SAVED_R3, r3
+	st.q	SP, SAVED_R4, r4
+	st.q	SP, SAVED_R5, r5
+	st.q	SP, SAVED_R6, r6
+	st.q	SP, SAVED_R18, r18
+	gettr	tr0, r3
+	st.q	SP, SAVED_TR0, r3
+
+	/* Set args for debug class handler */
+	getcon	EXPEVT, r2
+	movi	ret_from_exception, r3
+	ori	r3, 1, r3
+	movi	EVENT_DEBUG, r4
+	or	SP, ZERO, r5
+	getcon	KCR1, SP
+	pta	handle_exception, tr0
+	blink	tr0, ZERO
+
+	.balign	256
+debug_interrupt:
+	/* !!! WE COME HERE IN REAL MODE !!! */
+	/* Hook-up debug interrupt to allow various debugging options to be
+	 * hooked into its handler. */
+	/* Save original stack pointer into KCR1 */
+	synco
+	putcon	SP, KCR1
+	movi	resvec_save_area-CONFIG_CACHED_MEMORY_OFFSET, SP
+	ocbp	SP, 0
+	ocbp	SP, 32
+	synco
+
+	/* Save other original registers into reg_save_area thru real addresses */
+	st.q	SP, SAVED_R2, r2
+	st.q	SP, SAVED_R3, r3
+	st.q	SP, SAVED_R4, r4
+	st.q	SP, SAVED_R5, r5
+	st.q	SP, SAVED_R6, r6
+	st.q	SP, SAVED_R18, r18
+	gettr	tr0, r3
+	st.q	SP, SAVED_TR0, r3
+
+	/* move (spc,ssr)->(pspc,pssr).  The rte will shift
+	   them back again, so that they look like the originals
+	   as far as the real handler code is concerned. */
+	getcon	spc, r6
+	putcon	r6, pspc
+	getcon	ssr, r6
+	putcon	r6, pssr
+
+	! construct useful SR for handle_exception
+	movi	3, r6
+	shlli	r6, 30, r6
+	getcon	sr, r18
+	or	r18, r6, r6
+	putcon	r6, ssr
+
+	! SSR is now the current SR with the MD and MMU bits set
+	! i.e. the rte will switch back to priv mode and put
+	! the mmu back on
+
+	! construct spc
+	movi	handle_exception, r18
+	ori	r18, 1, r18		! for safety (do we need this?)
+	putcon	r18, spc
+
+	/* Set args for Non-debug, Not a TLB miss class handler */
+
+	! EXPEVT==0x80 is unused, so 'steal' this value to put the
+	! debug interrupt handler in the vectoring table
+	movi	0x80, r2
+	movi	ret_from_exception, r3
+	ori	r3, 1, r3
+	movi	EVENT_FAULT_NOT_TLB, r4
+
+	or	SP, ZERO, r5
+	movi	CONFIG_CACHED_MEMORY_OFFSET, r6
+	add	r6, r5, r5
+	getcon	KCR1, SP
+
+	synco	! for safety
+	rte	! -> handle_exception, switch back to priv mode again
+
+LRESVEC_block_end:			/* Marker. Unused. */
+
+	.balign	TEXT_SIZE
+
+/*
+ * Second level handler for VBR-based exceptions. Pre-handler.
+ * In common to all stack-frame sensitive handlers.
+ *
+ * Inputs:
+ * (KCR0) Current [current task union]
+ * (KCR1) Original SP
+ * (r2)   INTEVT/EXPEVT
+ * (r3)   appropriate return address
+ * (r4)   Event (0 = interrupt, 1 = TLB miss fault, 2 = Not TLB miss fault, 3=debug)
+ * (r5)   Pointer to reg_save_area
+ * (SP)   Original SP
+ *
+ * Available registers:
+ * (r6)
+ * (r18)
+ * (tr0)
+ *
+ */
+handle_exception:
+	/* Common 2nd level handler. */
+
+	/* First thing we need an appropriate stack pointer */
+	getcon	SSR, r6
+	shlri	r6, 30, r6
+	andi	r6, 1, r6
+	pta	stack_ok, tr0
+	bne	r6, ZERO, tr0		/* Original stack pointer is fine */
+
+	/* Set stack pointer for user fault */
+	getcon	KCR0, SP
+	movi	THREAD_SIZE, r6		/* Point to the end */
+	add	SP, r6, SP
+
+stack_ok:
+
+/* DEBUG : check for underflow/overflow of the kernel stack */
+	pta	no_underflow, tr0
+	getcon  KCR0, r6
+	movi	1024, r18
+	add	r6, r18, r6
+	bge	SP, r6, tr0 	! ? below 1k from bottom of stack : danger zone
+
+/* Just panic to cause a crash. */
+bad_sp:
+	ld.b	r63, 0, r6
+	nop
+
+no_underflow:
+	pta	bad_sp, tr0
+	getcon	kcr0, r6
+	movi	THREAD_SIZE, r18
+	add	r18, r6, r6
+	bgt	SP, r6, tr0	! sp above the stack
+
+	/* Make some room for the BASIC frame. */
+	movi	-(FRAME_SIZE), r6
+	add	SP, r6, SP
+
+/* Could do this with no stalling if we had another spare register, but the
+   code below will be OK. */
+	ld.q	r5, SAVED_R2, r6
+	ld.q	r5, SAVED_R3, r18
+	st.q	SP, FRAME_R(2), r6
+	ld.q	r5, SAVED_R4, r6
+	st.q	SP, FRAME_R(3), r18
+	ld.q	r5, SAVED_R5, r18
+	st.q	SP, FRAME_R(4), r6
+	ld.q	r5, SAVED_R6, r6
+	st.q	SP, FRAME_R(5), r18
+	ld.q	r5, SAVED_R18, r18
+	st.q	SP, FRAME_R(6), r6
+	ld.q	r5, SAVED_TR0, r6
+	st.q	SP, FRAME_R(18), r18
+	st.q	SP, FRAME_T(0), r6
+
+	/* Keep old SP around */
+	getcon	KCR1, r6
+
+	/* Save the rest of the general purpose registers */
+	st.q	SP, FRAME_R(0), r0
+	st.q	SP, FRAME_R(1), r1
+	st.q	SP, FRAME_R(7), r7
+	st.q	SP, FRAME_R(8), r8
+	st.q	SP, FRAME_R(9), r9
+	st.q	SP, FRAME_R(10), r10
+	st.q	SP, FRAME_R(11), r11
+	st.q	SP, FRAME_R(12), r12
+	st.q	SP, FRAME_R(13), r13
+	st.q	SP, FRAME_R(14), r14
+
+	/* SP is somewhere else */
+	st.q	SP, FRAME_R(15), r6
+
+	st.q	SP, FRAME_R(16), r16
+	st.q	SP, FRAME_R(17), r17
+	/* r18 is saved earlier. */
+	st.q	SP, FRAME_R(19), r19
+	st.q	SP, FRAME_R(20), r20
+	st.q	SP, FRAME_R(21), r21
+	st.q	SP, FRAME_R(22), r22
+	st.q	SP, FRAME_R(23), r23
+	st.q	SP, FRAME_R(24), r24
+	st.q	SP, FRAME_R(25), r25
+	st.q	SP, FRAME_R(26), r26
+	st.q	SP, FRAME_R(27), r27
+	st.q	SP, FRAME_R(28), r28
+	st.q	SP, FRAME_R(29), r29
+	st.q	SP, FRAME_R(30), r30
+	st.q	SP, FRAME_R(31), r31
+	st.q	SP, FRAME_R(32), r32
+	st.q	SP, FRAME_R(33), r33
+	st.q	SP, FRAME_R(34), r34
+	st.q	SP, FRAME_R(35), r35
+	st.q	SP, FRAME_R(36), r36
+	st.q	SP, FRAME_R(37), r37
+	st.q	SP, FRAME_R(38), r38
+	st.q	SP, FRAME_R(39), r39
+	st.q	SP, FRAME_R(40), r40
+	st.q	SP, FRAME_R(41), r41
+	st.q	SP, FRAME_R(42), r42
+	st.q	SP, FRAME_R(43), r43
+	st.q	SP, FRAME_R(44), r44
+	st.q	SP, FRAME_R(45), r45
+	st.q	SP, FRAME_R(46), r46
+	st.q	SP, FRAME_R(47), r47
+	st.q	SP, FRAME_R(48), r48
+	st.q	SP, FRAME_R(49), r49
+	st.q	SP, FRAME_R(50), r50
+	st.q	SP, FRAME_R(51), r51
+	st.q	SP, FRAME_R(52), r52
+	st.q	SP, FRAME_R(53), r53
+	st.q	SP, FRAME_R(54), r54
+	st.q	SP, FRAME_R(55), r55
+	st.q	SP, FRAME_R(56), r56
+	st.q	SP, FRAME_R(57), r57
+	st.q	SP, FRAME_R(58), r58
+	st.q	SP, FRAME_R(59), r59
+	st.q	SP, FRAME_R(60), r60
+	st.q	SP, FRAME_R(61), r61
+	st.q	SP, FRAME_R(62), r62
+
+	/*
+	 * Save the S* registers.
+	 */
+	getcon	SSR, r61
+	st.q	SP, FRAME_S(FSSR), r61
+	getcon	SPC, r62
+	st.q	SP, FRAME_S(FSPC), r62
+	movi	-1, r62			/* Reset syscall_nr */
+	st.q	SP, FRAME_S(FSYSCALL_ID), r62
+
+	/* Save the rest of the target registers */
+	gettr	tr1, r6
+	st.q	SP, FRAME_T(1), r6
+	gettr	tr2, r6
+	st.q	SP, FRAME_T(2), r6
+	gettr	tr3, r6
+	st.q	SP, FRAME_T(3), r6
+	gettr	tr4, r6
+	st.q	SP, FRAME_T(4), r6
+	gettr	tr5, r6
+	st.q	SP, FRAME_T(5), r6
+	gettr	tr6, r6
+	st.q	SP, FRAME_T(6), r6
+	gettr	tr7, r6
+	st.q	SP, FRAME_T(7), r6
+
+	! setup FP so that unwinder can wind back through nested kernel mode
+	! exceptions
+	add	SP, ZERO, r14
+
+#ifdef CONFIG_POOR_MANS_STRACE
+	/* We've pushed all the registers now, so only r2-r4 hold anything
+	 * useful. Move them into callee save registers */
+	or	r2, ZERO, r28
+	or	r3, ZERO, r29
+	or	r4, ZERO, r30
+
+	/* Preserve r2 as the event code */
+	movi	evt_debug, r3
+	ori	r3, 1, r3
+	ptabs	r3, tr0
+
+	or	SP, ZERO, r6
+	getcon	TRA, r5
+	blink	tr0, LINK
+
+	or	r28, ZERO, r2
+	or	r29, ZERO, r3
+	or	r30, ZERO, r4
+#endif
+
+	/* For syscall and debug race condition, get TRA now */
+	getcon	TRA, r5
+
+	/* We are in a safe position to turn SR.BL off, but set IMASK=0xf
+	 * Also set FD, to catch FPU usage in the kernel.
+	 *
+	 * benedict.gaster@superh.com 29/07/2002
+	 *
+	 * On all SH5-101 revisions it is unsafe to raise the IMASK and at the
+	 * same time change BL from 1->0, as any pending interrupt of a level
+	 * higher than he previous value of IMASK will leak through and be
+	 * taken unexpectedly.
+	 *
+	 * To avoid this we raise the IMASK and then issue another PUTCON to
+	 * enable interrupts.
+         */
+	getcon	SR, r6
+	movi	SR_IMASK | SR_FD, r7
+	or	r6, r7, r6
+	putcon	r6, SR
+	movi	SR_UNBLOCK_EXC, r7
+	and	r6, r7, r6
+	putcon	r6, SR
+
+
+	/* Now call the appropriate 3rd level handler */
+	or	r3, ZERO, LINK
+	movi	trap_jtable, r3
+	shlri	r2, 3, r2
+	ldx.l	r2, r3, r3
+	shlri	r2, 2, r2
+	ptabs	r3, tr0
+	or	SP, ZERO, r3
+	blink	tr0, ZERO
+
+/*
+ * Second level handler for VBR-based exceptions. Post-handlers.
+ *
+ * Post-handlers for interrupts (ret_from_irq), exceptions
+ * (ret_from_exception) and common reentrance doors (restore_all
+ * to get back to the original context, ret_from_syscall loop to
+ * check kernel exiting).
+ *
+ * ret_with_reschedule and work_notifysig are an inner lables of
+ * the ret_from_syscall loop.
+ *
+ * In common to all stack-frame sensitive handlers.
+ *
+ * Inputs:
+ * (SP)   struct pt_regs *, original register's frame pointer (basic)
+ *
+ */
+	.global ret_from_irq
+ret_from_irq:
+#ifdef CONFIG_POOR_MANS_STRACE
+	pta	evt_debug_ret_from_irq, tr0
+	ori	SP, 0, r2
+	blink	tr0, LINK
+#endif
+	ld.q	SP, FRAME_S(FSSR), r6
+	shlri	r6, 30, r6
+	andi	r6, 1, r6
+	pta	resume_kernel, tr0
+	bne	r6, ZERO, tr0		/* no further checks */
+	STI()
+	pta	ret_with_reschedule, tr0
+	blink	tr0, ZERO		/* Do not check softirqs */
+
+	.global ret_from_exception
+ret_from_exception:
+	preempt_stop()
+
+#ifdef CONFIG_POOR_MANS_STRACE
+	pta	evt_debug_ret_from_exc, tr0
+	ori	SP, 0, r2
+	blink	tr0, LINK
+#endif
+
+	ld.q	SP, FRAME_S(FSSR), r6
+	shlri	r6, 30, r6
+	andi	r6, 1, r6
+	pta	resume_kernel, tr0
+	bne	r6, ZERO, tr0		/* no further checks */
+
+	/* Check softirqs */
+
+#ifdef CONFIG_PREEMPT
+	pta   ret_from_syscall, tr0
+	blink   tr0, ZERO
+
+resume_kernel:
+	pta	restore_all, tr0
+
+	getcon	KCR0, r6
+	ld.l	r6, TI_PRE_COUNT, r7
+	beq/u	r7, ZERO, tr0
+
+need_resched:
+	ld.l	r6, TI_FLAGS, r7
+	movi	(1 << TIF_NEED_RESCHED), r8
+	and	r8, r7, r8
+	bne	r8, ZERO, tr0
+
+	getcon	SR, r7
+	andi	r7, 0xf0, r7
+	bne	r7, ZERO, tr0
+
+	movi	((PREEMPT_ACTIVE >> 16) & 65535), r8
+	shori	(PREEMPT_ACTIVE & 65535), r8
+	st.l	r6, TI_PRE_COUNT, r8
+
+	STI()
+	movi	schedule, r7
+	ori	r7, 1, r7
+	ptabs	r7, tr1
+	blink	tr1, LINK
+
+	st.l	r6, TI_PRE_COUNT, ZERO
+	CLI()
+
+	pta	need_resched, tr1
+	blink	tr1, ZERO
+#endif
+
+	.global ret_from_syscall
+ret_from_syscall:
+
+ret_with_reschedule:
+	getcon	KCR0, r6		! r6 contains current_thread_info
+	ld.l	r6, TI_FLAGS, r7	! r7 contains current_thread_info->flags
+
+	! FIXME:!!!
+	! no handling of TIF_SYSCALL_TRACE yet!!
+
+	movi	_TIF_NEED_RESCHED, r8
+	and	r8, r7, r8
+	pta	work_resched, tr0
+	bne	r8, ZERO, tr0
+
+	pta	restore_all, tr1
+
+	movi	(_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), r8
+	and	r8, r7, r8
+	pta	work_notifysig, tr0
+	bne	r8, ZERO, tr0
+
+	blink	tr1, ZERO
+
+work_resched:
+	pta	ret_from_syscall, tr0
+	gettr	tr0, LINK
+	movi	schedule, r6
+	ptabs	r6, tr0
+	blink	tr0, ZERO		/* Call schedule(), return on top */
+
+work_notifysig:
+	gettr	tr1, LINK
+
+	movi	do_signal, r6
+	ptabs	r6, tr0
+	or	SP, ZERO, r2
+	or	ZERO, ZERO, r3
+	blink	tr0, LINK	    /* Call do_signal(regs, 0), return here */
+
+restore_all:
+	/* Do prefetches */
+
+	ld.q	SP, FRAME_T(0), r6
+	ld.q	SP, FRAME_T(1), r7
+	ld.q	SP, FRAME_T(2), r8
+	ld.q	SP, FRAME_T(3), r9
+	ptabs	r6, tr0
+	ptabs	r7, tr1
+	ptabs	r8, tr2
+	ptabs	r9, tr3
+	ld.q	SP, FRAME_T(4), r6
+	ld.q	SP, FRAME_T(5), r7
+	ld.q	SP, FRAME_T(6), r8
+	ld.q	SP, FRAME_T(7), r9
+	ptabs	r6, tr4
+	ptabs	r7, tr5
+	ptabs	r8, tr6
+	ptabs	r9, tr7
+
+	ld.q	SP, FRAME_R(0), r0
+	ld.q	SP, FRAME_R(1), r1
+	ld.q	SP, FRAME_R(2), r2
+	ld.q	SP, FRAME_R(3), r3
+	ld.q	SP, FRAME_R(4), r4
+	ld.q	SP, FRAME_R(5), r5
+	ld.q	SP, FRAME_R(6), r6
+	ld.q	SP, FRAME_R(7), r7
+	ld.q	SP, FRAME_R(8), r8
+	ld.q	SP, FRAME_R(9), r9
+	ld.q	SP, FRAME_R(10), r10
+	ld.q	SP, FRAME_R(11), r11
+	ld.q	SP, FRAME_R(12), r12
+	ld.q	SP, FRAME_R(13), r13
+	ld.q	SP, FRAME_R(14), r14
+
+	ld.q	SP, FRAME_R(16), r16
+	ld.q	SP, FRAME_R(17), r17
+	ld.q	SP, FRAME_R(18), r18
+	ld.q	SP, FRAME_R(19), r19
+	ld.q	SP, FRAME_R(20), r20
+	ld.q	SP, FRAME_R(21), r21
+	ld.q	SP, FRAME_R(22), r22
+	ld.q	SP, FRAME_R(23), r23
+	ld.q	SP, FRAME_R(24), r24
+	ld.q	SP, FRAME_R(25), r25
+	ld.q	SP, FRAME_R(26), r26
+	ld.q	SP, FRAME_R(27), r27
+	ld.q	SP, FRAME_R(28), r28
+	ld.q	SP, FRAME_R(29), r29
+	ld.q	SP, FRAME_R(30), r30
+	ld.q	SP, FRAME_R(31), r31
+	ld.q	SP, FRAME_R(32), r32
+	ld.q	SP, FRAME_R(33), r33
+	ld.q	SP, FRAME_R(34), r34
+	ld.q	SP, FRAME_R(35), r35
+	ld.q	SP, FRAME_R(36), r36
+	ld.q	SP, FRAME_R(37), r37
+	ld.q	SP, FRAME_R(38), r38
+	ld.q	SP, FRAME_R(39), r39
+	ld.q	SP, FRAME_R(40), r40
+	ld.q	SP, FRAME_R(41), r41
+	ld.q	SP, FRAME_R(42), r42
+	ld.q	SP, FRAME_R(43), r43
+	ld.q	SP, FRAME_R(44), r44
+	ld.q	SP, FRAME_R(45), r45
+	ld.q	SP, FRAME_R(46), r46
+	ld.q	SP, FRAME_R(47), r47
+	ld.q	SP, FRAME_R(48), r48
+	ld.q	SP, FRAME_R(49), r49
+	ld.q	SP, FRAME_R(50), r50
+	ld.q	SP, FRAME_R(51), r51
+	ld.q	SP, FRAME_R(52), r52
+	ld.q	SP, FRAME_R(53), r53
+	ld.q	SP, FRAME_R(54), r54
+	ld.q	SP, FRAME_R(55), r55
+	ld.q	SP, FRAME_R(56), r56
+	ld.q	SP, FRAME_R(57), r57
+	ld.q	SP, FRAME_R(58), r58
+
+	getcon	SR, r59
+	movi	SR_BLOCK_EXC, r60
+	or	r59, r60, r59
+	putcon	r59, SR			/* SR.BL = 1, keep nesting out */
+	ld.q	SP, FRAME_S(FSSR), r61
+	ld.q	SP, FRAME_S(FSPC), r62
+	movi	SR_ASID_MASK, r60
+	and	r59, r60, r59
+	andc	r61, r60, r61		/* Clear out older ASID */
+	or	r59, r61, r61		/* Retain current ASID */
+	putcon	r61, SSR
+	putcon	r62, SPC
+
+	/* Ignore FSYSCALL_ID */
+
+	ld.q	SP, FRAME_R(59), r59
+	ld.q	SP, FRAME_R(60), r60
+	ld.q	SP, FRAME_R(61), r61
+	ld.q	SP, FRAME_R(62), r62
+
+	/* Last touch */
+	ld.q	SP, FRAME_R(15), SP
+	rte
+	nop
+
+/*
+ * Third level handlers for VBR-based exceptions. Adapting args to
+ * and/or deflecting to fourth level handlers.
+ *
+ * Fourth level handlers interface.
+ * Most are C-coded handlers directly pointed by the trap_jtable.
+ * (Third = Fourth level)
+ * Inputs:
+ * (r2)   fault/interrupt code, entry number (e.g. NMI = 14,
+ *	  IRL0-3 (0000) = 16, RTLBMISS = 2, SYSCALL = 11, etc ...)
+ * (r3)   struct pt_regs *, original register's frame pointer
+ * (r4)   Event (0 = interrupt, 1 = TLB miss fault, 2 = Not TLB miss fault)
+ * (r5)   TRA control register (for syscall/debug benefit only)
+ * (LINK) return address
+ * (SP)   = r3
+ *
+ * Kernel TLB fault handlers will get a slightly different interface.
+ * (r2)   struct pt_regs *, original register's frame pointer
+ * (r3)   writeaccess, whether it's a store fault as opposed to load fault
+ * (r4)   execaccess, whether it's a ITLB fault as opposed to DTLB fault
+ * (r5)   Effective Address of fault
+ * (LINK) return address
+ * (SP)   = r2
+ *
+ * fpu_error_or_IRQ? is a helper to deflect to the right cause.
+ *
+ */
+tlb_miss_load:
+	or	SP, ZERO, r2
+	or	ZERO, ZERO, r3		/* Read */
+	or	ZERO, ZERO, r4		/* Data */
+	getcon	TEA, r5
+	pta	call_do_page_fault, tr0
+	beq	ZERO, ZERO, tr0
+
+tlb_miss_store:
+	or	SP, ZERO, r2
+	movi	1, r3			/* Write */
+	or	ZERO, ZERO, r4		/* Data */
+	getcon	TEA, r5
+	pta	call_do_page_fault, tr0
+	beq	ZERO, ZERO, tr0
+
+itlb_miss_or_IRQ:
+	pta	its_IRQ, tr0
+	beqi/u	r4, EVENT_INTERRUPT, tr0
+	or	SP, ZERO, r2
+	or	ZERO, ZERO, r3		/* Read */
+	movi	1, r4			/* Text */
+	getcon	TEA, r5
+	/* Fall through */
+
+call_do_page_fault:
+	movi	do_page_fault, r6
+        ptabs	r6, tr0
+        blink	tr0, ZERO
+
+fpu_error_or_IRQA:
+	pta	its_IRQ, tr0
+	beqi/l	r4, EVENT_INTERRUPT, tr0
+#ifdef CONFIG_SH_FPU
+	movi	do_fpu_state_restore, r6
+#else
+	movi	do_exception_error, r6
+#endif
+	ptabs	r6, tr0
+	blink	tr0, ZERO
+
+fpu_error_or_IRQB:
+	pta	its_IRQ, tr0
+	beqi/l	r4, EVENT_INTERRUPT, tr0
+#ifdef CONFIG_SH_FPU
+	movi	do_fpu_state_restore, r6
+#else
+	movi	do_exception_error, r6
+#endif
+	ptabs	r6, tr0
+	blink	tr0, ZERO
+
+its_IRQ:
+	movi	do_IRQ, r6
+	ptabs	r6, tr0
+	blink	tr0, ZERO
+
+/*
+ * system_call/unknown_trap third level handler:
+ *
+ * Inputs:
+ * (r2)   fault/interrupt code, entry number (TRAP = 11)
+ * (r3)   struct pt_regs *, original register's frame pointer
+ * (r4)   Not used. Event (0=interrupt, 1=TLB miss fault, 2=Not TLB miss fault)
+ * (r5)   TRA Control Reg (0x00xyzzzz: x=1 SYSCALL, y = #args, z=nr)
+ * (SP)   = r3
+ * (LINK) return address: ret_from_exception
+ * (*r3)  Syscall parms: SC#, arg0, arg1, ..., arg5 in order (Saved r2/r7)
+ *
+ * Outputs:
+ * (*r3)  Syscall reply (Saved r2)
+ * (LINK) In case of syscall only it can be scrapped.
+ *        Common second level post handler will be ret_from_syscall.
+ *        Common (non-trace) exit point to that is syscall_ret (saving
+ *        result to r2). Common bad exit point is syscall_bad (returning
+ *        ENOSYS then saved to r2).
+ *
+ */
+
+unknown_trap:
+	/* Unknown Trap or User Trace */
+	movi	do_unknown_trapa, r6
+	ptabs	r6, tr0
+        ld.q    r3, FRAME_R(9), r2	/* r2 = #arg << 16 | syscall # */
+        andi    r2, 0x1ff, r2		/* r2 = syscall # */
+	blink	tr0, LINK
+
+	pta	syscall_ret, tr0
+	blink	tr0, ZERO
+
+        /* New syscall implementation*/
+system_call:
+	pta	unknown_trap, tr0
+        or      r5, ZERO, r4            /* TRA (=r5) -> r4 */
+        shlri   r4, 20, r4
+	bnei	r4, 1, tr0		/* unknown_trap if not 0x1yzzzz */
+
+        /* It's a system call */
+	st.q    r3, FRAME_S(FSYSCALL_ID), r5 	/* ID (0x1yzzzz) -> stack */
+	andi    r5, 0x1ff, r5			/* syscall # -> r5	  */
+
+	STI()
+
+	pta	syscall_allowed, tr0
+	movi	NR_syscalls - 1, r4	/* Last valid */
+	bgeu/l	r4, r5, tr0
+
+syscall_bad:
+	/* Return ENOSYS ! */
+	movi	-(ENOSYS), r2		/* Fall-through */
+
+	.global syscall_ret
+syscall_ret:
+	st.q	SP, FRAME_R(9), r2	/* Expecting SP back to BASIC frame */
+
+#ifdef CONFIG_POOR_MANS_STRACE
+	/* nothing useful in registers at this point */
+
+	movi	evt_debug2, r5
+	ori	r5, 1, r5
+	ptabs	r5, tr0
+	ld.q	SP, FRAME_R(9), r2
+	or	SP, ZERO, r3
+	blink	tr0, LINK
+#endif
+
+	ld.q	SP, FRAME_S(FSPC), r2
+	addi	r2, 4, r2		/* Move PC, being pre-execution event */
+	st.q	SP, FRAME_S(FSPC), r2
+	pta	ret_from_syscall, tr0
+	blink	tr0, ZERO
+
+
+/*  A different return path for ret_from_fork, because we now need
+ *  to call schedule_tail with the later kernels. Because prev is
+ *  loaded into r2 by switch_to() means we can just call it straight  away
+ */
+
+.global	ret_from_fork
+ret_from_fork:
+
+	movi	schedule_tail,r5
+	ori	r5, 1, r5
+	ptabs	r5, tr0
+	blink	tr0, LINK
+
+#ifdef CONFIG_POOR_MANS_STRACE
+	/* nothing useful in registers at this point */
+
+	movi	evt_debug2, r5
+	ori	r5, 1, r5
+	ptabs	r5, tr0
+	ld.q	SP, FRAME_R(9), r2
+	or	SP, ZERO, r3
+	blink	tr0, LINK
+#endif
+
+	ld.q	SP, FRAME_S(FSPC), r2
+	addi	r2, 4, r2		/* Move PC, being pre-execution event */
+	st.q	SP, FRAME_S(FSPC), r2
+	pta	ret_from_syscall, tr0
+	blink	tr0, ZERO
+
+
+
+syscall_allowed:
+	/* Use LINK to deflect the exit point, default is syscall_ret */
+	pta	syscall_ret, tr0
+	gettr	tr0, LINK
+	pta	syscall_notrace, tr0
+
+	getcon	KCR0, r2
+	ld.l	r2, TI_FLAGS, r4
+	movi	(1 << TIF_SYSCALL_TRACE), r6
+	and	r6, r4, r6
+	beq/l	r6, ZERO, tr0
+
+	/* Trace it by calling syscall_trace before and after */
+	movi	syscall_trace, r4
+	ptabs	r4, tr0
+	blink	tr0, LINK
+	/* Reload syscall number as r5 is trashed by syscall_trace */
+	ld.q	SP, FRAME_S(FSYSCALL_ID), r5
+	andi	r5, 0x1ff, r5
+
+	pta	syscall_ret_trace, tr0
+	gettr	tr0, LINK
+
+syscall_notrace:
+	/* Now point to the appropriate 4th level syscall handler */
+	movi	sys_call_table, r4
+	shlli	r5, 2, r5
+	ldx.l	r4, r5, r5
+	ptabs	r5, tr0
+
+	/* Prepare original args */
+	ld.q	SP, FRAME_R(2), r2
+	ld.q	SP, FRAME_R(3), r3
+	ld.q	SP, FRAME_R(4), r4
+	ld.q	SP, FRAME_R(5), r5
+	ld.q	SP, FRAME_R(6), r6
+	ld.q	SP, FRAME_R(7), r7
+
+	/* And now the trick for those syscalls requiring regs * ! */
+	or	SP, ZERO, r8
+
+	/* Call it */
+	blink	tr0, ZERO	/* LINK is already properly set */
+
+syscall_ret_trace:
+	/* We get back here only if under trace */
+	st.q	SP, FRAME_R(9), r2	/* Save return value */
+
+	movi	syscall_trace, LINK
+	ptabs	LINK, tr0
+	blink	tr0, LINK
+
+	/* This needs to be done after any syscall tracing */
+	ld.q	SP, FRAME_S(FSPC), r2
+	addi	r2, 4, r2	/* Move PC, being pre-execution event */
+	st.q	SP, FRAME_S(FSPC), r2
+
+	pta	ret_from_syscall, tr0
+	blink	tr0, ZERO		/* Resume normal return sequence */
+
+/*
+ * --- Switch to running under a particular ASID and return the previous ASID value
+ * --- The caller is assumed to have done a cli before calling this.
+ *
+ * Input r2 : new ASID
+ * Output r2 : old ASID
+ */
+
+	.global switch_and_save_asid
+switch_and_save_asid:
+	getcon	sr, r0
+	movi	255, r4
+	shlli 	r4, 16, r4	/* r4 = mask to select ASID */
+	and	r0, r4, r3	/* r3 = shifted old ASID */
+	andi	r2, 255, r2	/* mask down new ASID */
+	shlli	r2, 16, r2	/* align new ASID against SR.ASID */
+	andc	r0, r4, r0	/* efface old ASID from SR */
+	or	r0, r2, r0	/* insert the new ASID */
+	putcon	r0, ssr
+	movi	1f, r0
+	putcon	r0, spc
+	rte
+	nop
+1:
+	ptabs	LINK, tr0
+	shlri	r3, 16, r2	/* r2 = old ASID */
+	blink tr0, r63
+
+	.global	route_to_panic_handler
+route_to_panic_handler:
+	/* Switch to real mode, goto panic_handler, don't return.  Useful for
+	   last-chance debugging, e.g. if no output wants to go to the console.
+	   */
+
+	movi	panic_handler - CONFIG_CACHED_MEMORY_OFFSET, r1
+	ptabs	r1, tr0
+	pta	1f, tr1
+	gettr	tr1, r0
+	putcon	r0, spc
+	getcon	sr, r0
+	movi	1, r1
+	shlli	r1, 31, r1
+	andc	r0, r1, r0
+	putcon	r0, ssr
+	rte
+	nop
+1:	/* Now in real mode */
+	blink tr0, r63
+	nop
+
+	.global peek_real_address_q
+peek_real_address_q:
+	/* Two args:
+	   r2 : real mode address to peek
+	   r2(out) : result quadword
+
+	   This is provided as a cheapskate way of manipulating device
+	   registers for debugging (to avoid the need to onchip_remap the debug
+	   module, and to avoid the need to onchip_remap the watchpoint
+	   controller in a way that identity maps sufficient bits to avoid the
+	   SH5-101 cut2 silicon defect).
+
+	   This code is not performance critical
+	*/
+
+	add.l	r2, r63, r2	/* sign extend address */
+	getcon	sr, r0		/* r0 = saved original SR */
+	movi	1, r1
+	shlli	r1, 28, r1
+	or	r0, r1, r1	/* r0 with block bit set */
+	putcon	r1, sr		/* now in critical section */
+	movi	1, r36
+	shlli	r36, 31, r36
+	andc	r1, r36, r1	/* turn sr.mmu off in real mode section */
+
+	putcon	r1, ssr
+	movi	.peek0 - CONFIG_CACHED_MEMORY_OFFSET, r36 /* real mode target address */
+	movi	1f, r37		/* virtual mode return addr */
+	putcon	r36, spc
+
+	synco
+	rte
+	nop
+
+.peek0:	/* come here in real mode, don't touch caches!!
+           still in critical section (sr.bl==1) */
+	putcon	r0, ssr
+	putcon	r37, spc
+	/* Here's the actual peek.  If the address is bad, all bets are now off
+	 * what will happen (handlers invoked in real-mode = bad news) */
+	ld.q	r2, 0, r2
+	synco
+	rte	/* Back to virtual mode */
+	nop
+
+1:
+	ptabs	LINK, tr0
+	blink	tr0, r63
+
+	.global poke_real_address_q
+poke_real_address_q:
+	/* Two args:
+	   r2 : real mode address to poke
+	   r3 : quadword value to write.
+
+	   This is provided as a cheapskate way of manipulating device
+	   registers for debugging (to avoid the need to onchip_remap the debug
+	   module, and to avoid the need to onchip_remap the watchpoint
+	   controller in a way that identity maps sufficient bits to avoid the
+	   SH5-101 cut2 silicon defect).
+
+	   This code is not performance critical
+	*/
+
+	add.l	r2, r63, r2	/* sign extend address */
+	getcon	sr, r0		/* r0 = saved original SR */
+	movi	1, r1
+	shlli	r1, 28, r1
+	or	r0, r1, r1	/* r0 with block bit set */
+	putcon	r1, sr		/* now in critical section */
+	movi	1, r36
+	shlli	r36, 31, r36
+	andc	r1, r36, r1	/* turn sr.mmu off in real mode section */
+
+	putcon	r1, ssr
+	movi	.poke0-CONFIG_CACHED_MEMORY_OFFSET, r36 /* real mode target address */
+	movi	1f, r37		/* virtual mode return addr */
+	putcon	r36, spc
+
+	synco
+	rte
+	nop
+
+.poke0:	/* come here in real mode, don't touch caches!!
+           still in critical section (sr.bl==1) */
+	putcon	r0, ssr
+	putcon	r37, spc
+	/* Here's the actual poke.  If the address is bad, all bets are now off
+	 * what will happen (handlers invoked in real-mode = bad news) */
+	st.q	r2, 0, r3
+	synco
+	rte	/* Back to virtual mode */
+	nop
+
+1:
+	ptabs	LINK, tr0
+	blink	tr0, r63
+
+/*
+ * --- User Access Handling Section
+ */
+
+/*
+ * User Access support. It all moved to non inlined Assembler
+ * functions in here.
+ *
+ * __kernel_size_t __copy_user(void *__to, const void *__from,
+ *			       __kernel_size_t __n)
+ *
+ * Inputs:
+ * (r2)  target address
+ * (r3)  source address
+ * (r4)  size in bytes
+ *
+ * Ouputs:
+ * (*r2) target data
+ * (r2)  non-copied bytes
+ *
+ * If a fault occurs on the user pointer, bail out early and return the
+ * number of bytes not copied in r2.
+ * Strategy : for large blocks, call a real memcpy function which can
+ * move >1 byte at a time using unaligned ld/st instructions, and can
+ * manipulate the cache using prefetch + alloco to improve the speed
+ * further.  If a fault occurs in that function, just revert to the
+ * byte-by-byte approach used for small blocks; this is rare so the
+ * performance hit for that case does not matter.
+ *
+ * For small blocks it's not worth the overhead of setting up and calling
+ * the memcpy routine; do the copy a byte at a time.
+ *
+ */
+	.global	__copy_user
+__copy_user:
+	pta	__copy_user_byte_by_byte, tr1
+	movi	16, r0 ! this value is a best guess, should tune it by benchmarking
+	bge/u	r0, r4, tr1
+	pta copy_user_memcpy, tr0
+	addi	SP, -32, SP
+	/* Save arguments in case we have to fix-up unhandled page fault */
+	st.q	SP, 0, r2
+	st.q	SP, 8, r3
+	st.q	SP, 16, r4
+	st.q	SP, 24, r35 ! r35 is callee-save
+	/* Save LINK in a register to reduce RTS time later (otherwise
+	   ld SP,*,LINK;ptabs LINK;trn;blink trn,r63 becomes a critical path) */
+	ori	LINK, 0, r35
+	blink	tr0, LINK
+
+	/* Copy completed normally if we get back here */
+	ptabs	r35, tr0
+	ld.q	SP, 24, r35
+	/* don't restore r2-r4, pointless */
+	/* set result=r2 to zero as the copy must have succeeded. */
+	or	r63, r63, r2
+	addi	SP, 32, SP
+	blink	tr0, r63 ! RTS
+
+	.global __copy_user_fixup
+__copy_user_fixup:
+	/* Restore stack frame */
+	ori	r35, 0, LINK
+	ld.q	SP, 24, r35
+	ld.q	SP, 16, r4
+	ld.q	SP,  8, r3
+	ld.q	SP,  0, r2
+	addi	SP, 32, SP
+	/* Fall through to original code, in the 'same' state we entered with */
+
+/* The slow byte-by-byte method is used if the fast copy traps due to a bad
+   user address.  In that rare case, the speed drop can be tolerated. */
+__copy_user_byte_by_byte:
+	pta	___copy_user_exit, tr1
+	pta	___copy_user1, tr0
+	beq/u	r4, r63, tr1	/* early exit for zero length copy */
+	sub	r2, r3, r0
+	addi	r0, -1, r0
+
+___copy_user1:
+	ld.b	r3, 0, r5		/* Fault address 1 */
+
+	/* Could rewrite this to use just 1 add, but the second comes 'free'
+	   due to load latency */
+	addi	r3, 1, r3
+	addi	r4, -1, r4		/* No real fixup required */
+___copy_user2:
+	stx.b	r3, r0, r5		/* Fault address 2 */
+	bne     r4, ZERO, tr0
+
+___copy_user_exit:
+	or	r4, ZERO, r2
+	ptabs	LINK, tr0
+	blink	tr0, ZERO
+
+/*
+ * __kernel_size_t __clear_user(void *addr, __kernel_size_t size)
+ *
+ * Inputs:
+ * (r2)  target address
+ * (r3)  size in bytes
+ *
+ * Ouputs:
+ * (*r2) zero-ed target data
+ * (r2)  non-zero-ed bytes
+ */
+	.global	__clear_user
+__clear_user:
+	pta	___clear_user_exit, tr1
+	pta	___clear_user1, tr0
+	beq/u	r3, r63, tr1
+
+___clear_user1:
+	st.b	r2, 0, ZERO		/* Fault address */
+	addi	r2, 1, r2
+	addi	r3, -1, r3		/* No real fixup required */
+	bne     r3, ZERO, tr0
+
+___clear_user_exit:
+	or	r3, ZERO, r2
+	ptabs	LINK, tr0
+	blink	tr0, ZERO
+
+
+/*
+ * int __strncpy_from_user(unsigned long __dest, unsigned long __src,
+ *			   int __count)
+ *
+ * Inputs:
+ * (r2)  target address
+ * (r3)  source address
+ * (r4)  maximum size in bytes
+ *
+ * Ouputs:
+ * (*r2) copied data
+ * (r2)  -EFAULT (in case of faulting)
+ *       copied data (otherwise)
+ */
+	.global	__strncpy_from_user
+__strncpy_from_user:
+	pta	___strncpy_from_user1, tr0
+	pta	___strncpy_from_user_done, tr1
+	or	r4, ZERO, r5		/* r5 = original count */
+	beq/u	r4, r63, tr1		/* early exit if r4==0 */
+	movi	-(EFAULT), r6		/* r6 = reply, no real fixup */
+	or	ZERO, ZERO, r7		/* r7 = data, clear top byte of data */
+
+___strncpy_from_user1:
+	ld.b	r3, 0, r7		/* Fault address: only in reading */
+	st.b	r2, 0, r7
+	addi	r2, 1, r2
+	addi	r3, 1, r3
+	beq/u	ZERO, r7, tr1
+	addi	r4, -1, r4		/* return real number of copied bytes */
+	bne/l	ZERO, r4, tr0
+
+___strncpy_from_user_done:
+	sub	r5, r4, r6		/* If done, return copied */
+
+___strncpy_from_user_exit:
+	or	r6, ZERO, r2
+	ptabs	LINK, tr0
+	blink	tr0, ZERO
+
+/*
+ * extern long __strnlen_user(const char *__s, long __n)
+ *
+ * Inputs:
+ * (r2)  source address
+ * (r3)  source size in bytes
+ *
+ * Ouputs:
+ * (r2)  -EFAULT (in case of faulting)
+ *       string length (otherwise)
+ */
+	.global	__strnlen_user
+__strnlen_user:
+	pta	___strnlen_user_set_reply, tr0
+	pta	___strnlen_user1, tr1
+	or	ZERO, ZERO, r5		/* r5 = counter */
+	movi	-(EFAULT), r6		/* r6 = reply, no real fixup */
+	or	ZERO, ZERO, r7		/* r7 = data, clear top byte of data */
+	beq	r3, ZERO, tr0
+
+___strnlen_user1:
+	ldx.b	r2, r5, r7		/* Fault address: only in reading */
+	addi	r3, -1, r3		/* No real fixup */
+	addi	r5, 1, r5
+	beq	r3, ZERO, tr0
+	bne	r7, ZERO, tr1
+! The line below used to be active.  This meant led to a junk byte lying between each pair
+! of entries in the argv & envp structures in memory.  Whilst the program saw the right data
+! via the argv and envp arguments to main, it meant the 'flat' representation visible through
+! /proc/$pid/cmdline was corrupt, causing trouble with ps, for example.
+!	addi	r5, 1, r5		/* Include '\0' */
+
+___strnlen_user_set_reply:
+	or	r5, ZERO, r6		/* If done, return counter */
+
+___strnlen_user_exit:
+	or	r6, ZERO, r2
+	ptabs	LINK, tr0
+	blink	tr0, ZERO
+
+/*
+ * extern long __get_user_asm_?(void *val, long addr)
+ *
+ * Inputs:
+ * (r2)  dest address
+ * (r3)  source address (in User Space)
+ *
+ * Ouputs:
+ * (r2)  -EFAULT (faulting)
+ *       0 	 (not faulting)
+ */
+	.global	__get_user_asm_b
+__get_user_asm_b:
+	or	r2, ZERO, r4
+	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
+
+___get_user_asm_b1:
+	ld.b	r3, 0, r5		/* r5 = data */
+	st.b	r4, 0, r5
+	or	ZERO, ZERO, r2
+
+___get_user_asm_b_exit:
+	ptabs	LINK, tr0
+	blink	tr0, ZERO
+
+
+	.global	__get_user_asm_w
+__get_user_asm_w:
+	or	r2, ZERO, r4
+	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
+
+___get_user_asm_w1:
+	ld.w	r3, 0, r5		/* r5 = data */
+	st.w	r4, 0, r5
+	or	ZERO, ZERO, r2
+
+___get_user_asm_w_exit:
+	ptabs	LINK, tr0
+	blink	tr0, ZERO
+
+
+	.global	__get_user_asm_l
+__get_user_asm_l:
+	or	r2, ZERO, r4
+	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
+
+___get_user_asm_l1:
+	ld.l	r3, 0, r5		/* r5 = data */
+	st.l	r4, 0, r5
+	or	ZERO, ZERO, r2
+
+___get_user_asm_l_exit:
+	ptabs	LINK, tr0
+	blink	tr0, ZERO
+
+
+	.global	__get_user_asm_q
+__get_user_asm_q:
+	or	r2, ZERO, r4
+	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
+
+___get_user_asm_q1:
+	ld.q	r3, 0, r5		/* r5 = data */
+	st.q	r4, 0, r5
+	or	ZERO, ZERO, r2
+
+___get_user_asm_q_exit:
+	ptabs	LINK, tr0
+	blink	tr0, ZERO
+
+/*
+ * extern long __put_user_asm_?(void *pval, long addr)
+ *
+ * Inputs:
+ * (r2)  kernel pointer to value
+ * (r3)  dest address (in User Space)
+ *
+ * Ouputs:
+ * (r2)  -EFAULT (faulting)
+ *       0 	 (not faulting)
+ */
+	.global	__put_user_asm_b
+__put_user_asm_b:
+	ld.b	r2, 0, r4		/* r4 = data */
+	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
+
+___put_user_asm_b1:
+	st.b	r3, 0, r4
+	or	ZERO, ZERO, r2
+
+___put_user_asm_b_exit:
+	ptabs	LINK, tr0
+	blink	tr0, ZERO
+
+
+	.global	__put_user_asm_w
+__put_user_asm_w:
+	ld.w	r2, 0, r4		/* r4 = data */
+	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
+
+___put_user_asm_w1:
+	st.w	r3, 0, r4
+	or	ZERO, ZERO, r2
+
+___put_user_asm_w_exit:
+	ptabs	LINK, tr0
+	blink	tr0, ZERO
+
+
+	.global	__put_user_asm_l
+__put_user_asm_l:
+	ld.l	r2, 0, r4		/* r4 = data */
+	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
+
+___put_user_asm_l1:
+	st.l	r3, 0, r4
+	or	ZERO, ZERO, r2
+
+___put_user_asm_l_exit:
+	ptabs	LINK, tr0
+	blink	tr0, ZERO
+
+
+	.global	__put_user_asm_q
+__put_user_asm_q:
+	ld.q	r2, 0, r4		/* r4 = data */
+	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
+
+___put_user_asm_q1:
+	st.q	r3, 0, r4
+	or	ZERO, ZERO, r2
+
+___put_user_asm_q_exit:
+	ptabs	LINK, tr0
+	blink	tr0, ZERO
+
+panic_stash_regs:
+	/* The idea is : when we get an unhandled panic, we dump the registers
+	   to a known memory location, the just sit in a tight loop.
+	   This allows the human to look at the memory region through the GDB
+	   session (assuming the debug module's SHwy initiator isn't locked up
+	   or anything), to hopefully analyze the cause of the panic. */
+
+	/* On entry, former r15 (SP) is in DCR
+	   former r0  is at resvec_saved_area + 0
+	   former r1  is at resvec_saved_area + 8
+	   former tr0 is at resvec_saved_area + 32
+	   DCR is the only register whose value is lost altogether.
+	*/
+
+	movi	0xffffffff80000000, r0 ! phy of dump area
+	ld.q	SP, 0x000, r1	! former r0
+	st.q	r0,  0x000, r1
+	ld.q	SP, 0x008, r1	! former r1
+	st.q	r0,  0x008, r1
+	st.q	r0,  0x010, r2
+	st.q	r0,  0x018, r3
+	st.q	r0,  0x020, r4
+	st.q	r0,  0x028, r5
+	st.q	r0,  0x030, r6
+	st.q	r0,  0x038, r7
+	st.q	r0,  0x040, r8
+	st.q	r0,  0x048, r9
+	st.q	r0,  0x050, r10
+	st.q	r0,  0x058, r11
+	st.q	r0,  0x060, r12
+	st.q	r0,  0x068, r13
+	st.q	r0,  0x070, r14
+	getcon	dcr, r14
+	st.q	r0,  0x078, r14
+	st.q	r0,  0x080, r16
+	st.q	r0,  0x088, r17
+	st.q	r0,  0x090, r18
+	st.q	r0,  0x098, r19
+	st.q	r0,  0x0a0, r20
+	st.q	r0,  0x0a8, r21
+	st.q	r0,  0x0b0, r22
+	st.q	r0,  0x0b8, r23
+	st.q	r0,  0x0c0, r24
+	st.q	r0,  0x0c8, r25
+	st.q	r0,  0x0d0, r26
+	st.q	r0,  0x0d8, r27
+	st.q	r0,  0x0e0, r28
+	st.q	r0,  0x0e8, r29
+	st.q	r0,  0x0f0, r30
+	st.q	r0,  0x0f8, r31
+	st.q	r0,  0x100, r32
+	st.q	r0,  0x108, r33
+	st.q	r0,  0x110, r34
+	st.q	r0,  0x118, r35
+	st.q	r0,  0x120, r36
+	st.q	r0,  0x128, r37
+	st.q	r0,  0x130, r38
+	st.q	r0,  0x138, r39
+	st.q	r0,  0x140, r40
+	st.q	r0,  0x148, r41
+	st.q	r0,  0x150, r42
+	st.q	r0,  0x158, r43
+	st.q	r0,  0x160, r44
+	st.q	r0,  0x168, r45
+	st.q	r0,  0x170, r46
+	st.q	r0,  0x178, r47
+	st.q	r0,  0x180, r48
+	st.q	r0,  0x188, r49
+	st.q	r0,  0x190, r50
+	st.q	r0,  0x198, r51
+	st.q	r0,  0x1a0, r52
+	st.q	r0,  0x1a8, r53
+	st.q	r0,  0x1b0, r54
+	st.q	r0,  0x1b8, r55
+	st.q	r0,  0x1c0, r56
+	st.q	r0,  0x1c8, r57
+	st.q	r0,  0x1d0, r58
+	st.q	r0,  0x1d8, r59
+	st.q	r0,  0x1e0, r60
+	st.q	r0,  0x1e8, r61
+	st.q	r0,  0x1f0, r62
+	st.q	r0,  0x1f8, r63	! bogus, but for consistency's sake...
+
+	ld.q	SP, 0x020, r1  ! former tr0
+	st.q	r0,  0x200, r1
+	gettr	tr1, r1
+	st.q	r0,  0x208, r1
+	gettr	tr2, r1
+	st.q	r0,  0x210, r1
+	gettr	tr3, r1
+	st.q	r0,  0x218, r1
+	gettr	tr4, r1
+	st.q	r0,  0x220, r1
+	gettr	tr5, r1
+	st.q	r0,  0x228, r1
+	gettr	tr6, r1
+	st.q	r0,  0x230, r1
+	gettr	tr7, r1
+	st.q	r0,  0x238, r1
+
+	getcon	sr,  r1
+	getcon	ssr,  r2
+	getcon	pssr,  r3
+	getcon	spc,  r4
+	getcon	pspc,  r5
+	getcon	intevt,  r6
+	getcon	expevt,  r7
+	getcon	pexpevt,  r8
+	getcon	tra,  r9
+	getcon	tea,  r10
+	getcon	kcr0, r11
+	getcon	kcr1, r12
+	getcon	vbr,  r13
+	getcon	resvec,  r14
+
+	st.q	r0,  0x240, r1
+	st.q	r0,  0x248, r2
+	st.q	r0,  0x250, r3
+	st.q	r0,  0x258, r4
+	st.q	r0,  0x260, r5
+	st.q	r0,  0x268, r6
+	st.q	r0,  0x270, r7
+	st.q	r0,  0x278, r8
+	st.q	r0,  0x280, r9
+	st.q	r0,  0x288, r10
+	st.q	r0,  0x290, r11
+	st.q	r0,  0x298, r12
+	st.q	r0,  0x2a0, r13
+	st.q	r0,  0x2a8, r14
+
+	getcon	SPC,r2
+	getcon	SSR,r3
+	getcon	EXPEVT,r4
+	/* Prepare to jump to C - physical address */
+	movi	panic_handler-CONFIG_CACHED_MEMORY_OFFSET, r1
+	ori	r1, 1, r1
+	ptabs   r1, tr0
+	getcon	DCR, SP
+	blink	tr0, ZERO
+	nop
+	nop
+	nop
+	nop
+
+
+
+
+/*
+ * --- Signal Handling Section
+ */
+
+/*
+ * extern long long _sa_default_rt_restorer
+ * extern long long _sa_default_restorer
+ *
+ *		 or, better,
+ *
+ * extern void _sa_default_rt_restorer(void)
+ * extern void _sa_default_restorer(void)
+ *
+ * Code prototypes to do a sys_rt_sigreturn() or sys_sysreturn()
+ * from user space. Copied into user space by signal management.
+ * Both must be quad aligned and 2 quad long (4 instructions).
+ *
+ */
+	.balign 8
+	.global sa_default_rt_restorer
+sa_default_rt_restorer:
+	movi	0x10, r9
+	shori	__NR_rt_sigreturn, r9
+	trapa	r9
+	nop
+
+	.balign 8
+	.global sa_default_restorer
+sa_default_restorer:
+	movi	0x10, r9
+	shori	__NR_sigreturn, r9
+	trapa	r9
+	nop
+
+/*
+ * --- __ex_table Section
+ */
+
+/*
+ * User Access Exception Table.
+ */
+	.section	__ex_table,  "a"
+
+	.global asm_uaccess_start	/* Just a marker */
+asm_uaccess_start:
+
+	.long	___copy_user1, ___copy_user_exit
+	.long	___copy_user2, ___copy_user_exit
+	.long	___clear_user1, ___clear_user_exit
+	.long	___strncpy_from_user1, ___strncpy_from_user_exit
+	.long	___strnlen_user1, ___strnlen_user_exit
+	.long	___get_user_asm_b1, ___get_user_asm_b_exit
+	.long	___get_user_asm_w1, ___get_user_asm_w_exit
+	.long	___get_user_asm_l1, ___get_user_asm_l_exit
+	.long	___get_user_asm_q1, ___get_user_asm_q_exit
+	.long	___put_user_asm_b1, ___put_user_asm_b_exit
+	.long	___put_user_asm_w1, ___put_user_asm_w_exit
+	.long	___put_user_asm_l1, ___put_user_asm_l_exit
+	.long	___put_user_asm_q1, ___put_user_asm_q_exit
+
+	.global asm_uaccess_end		/* Just a marker */
+asm_uaccess_end:
+
+
+
+
+/*
+ * --- .text.init Section
+ */
+
+	.section	.text.init, "ax"
+
+/*
+ * void trap_init (void)
+ *
+ */
+	.global	trap_init
+trap_init:
+	addi	SP, -24, SP			/* Room to save r28/r29/r30 */
+	st.q	SP, 0, r28
+	st.q	SP, 8, r29
+	st.q	SP, 16, r30
+
+	/* Set VBR and RESVEC */
+	movi	LVBR_block, r19
+	andi	r19, -4, r19			/* reset MMUOFF + reserved */
+	/* For RESVEC exceptions we force the MMU off, which means we need the
+	   physical address. */
+	movi	LRESVEC_block-CONFIG_CACHED_MEMORY_OFFSET, r20
+	andi	r20, -4, r20			/* reset reserved */
+	ori	r20, 1, r20			/* set MMUOFF */
+	putcon	r19, VBR
+	putcon	r20, RESVEC
+
+	/* Sanity check */
+	movi	LVBR_block_end, r21
+	andi	r21, -4, r21
+	movi	BLOCK_SIZE, r29			/* r29 = expected size */
+	or	r19, ZERO, r30
+	add	r19, r29, r19
+
+	/*
+	 * Ugly, but better loop forever now than crash afterwards.
+	 * We should print a message, but if we touch LVBR or
+	 * LRESVEC blocks we should not be surprised if we get stuck
+	 * in trap_init().
+	 */
+	pta	trap_init_loop, tr1
+	gettr	tr1, r28			/* r28 = trap_init_loop */
+	sub	r21, r30, r30			/* r30 = actual size */
+
+	/*
+	 * VBR/RESVEC handlers overlap by being bigger than
+	 * allowed. Very bad. Just loop forever.
+	 * (r28) panic/loop address
+	 * (r29) expected size
+	 * (r30) actual size
+	 */
+trap_init_loop:
+	bne	r19, r21, tr1
+
+	/* Now that exception vectors are set up reset SR.BL */
+	getcon 	SR, r22
+	movi	SR_UNBLOCK_EXC, r23
+	and	r22, r23, r22
+	putcon	r22, SR
+
+	addi	SP, 24, SP
+	ptabs	LINK, tr0
+	blink	tr0, ZERO
+