sparc: prepare kernel/ for unification

o sparc32 files with identical names to sparc64 renamed to <name>_32.S
o introduced a few Kconfig helpers to simplify Makefile logic
o refactored Makefile to prepare for unification
  - use obj-$(CONFIG_SPARC32) for sparc32 specific files
  - use <name>_$(BITS) for files where sparc64 has a _64 variant
  - sparc64 directly include a few files where sparc32 builds them,
    refer to these files directly (no BITS)
  - sneaked in -Werror as used by sparc64
o modified sparc/Makefile to use the new names for head/init_task

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 674 insertions, 0 deletions

diff --git a/arch/sparc/kernel/irq_32.c b/arch/sparc/kernel/irq_32.c
new file mode 100644
index 000000000000..93e1d1c65290
--- /dev/null
+++ b/arch/sparc/kernel/irq_32.c
@@ -0,0 +1,674 @@
+/*
+ *  arch/sparc/kernel/irq.c:  Interrupt request handling routines. On the
+ *                            Sparc the IRQs are basically 'cast in stone'
+ *                            and you are supposed to probe the prom's device
+ *                            node trees to find out who's got which IRQ.
+ *
+ *  Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *  Copyright (C) 1995 Miguel de Icaza (miguel@nuclecu.unam.mx)
+ *  Copyright (C) 1995,2002 Pete A. Zaitcev (zaitcev@yahoo.com)
+ *  Copyright (C) 1996 Dave Redman (djhr@tadpole.co.uk)
+ *  Copyright (C) 1998-2000 Anton Blanchard (anton@samba.org)
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <linux/kernel_stat.h>
+#include <linux/signal.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/delay.h>
+#include <linux/threads.h>
+#include <linux/spinlock.h>
+#include <linux/seq_file.h>
+
+#include <asm/ptrace.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/psr.h>
+#include <asm/smp.h>
+#include <asm/vaddrs.h>
+#include <asm/timer.h>
+#include <asm/openprom.h>
+#include <asm/oplib.h>
+#include <asm/traps.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/pgalloc.h>
+#include <asm/pgtable.h>
+#include <asm/pcic.h>
+#include <asm/cacheflush.h>
+#include <asm/irq_regs.h>
+
+#include "irq.h"
+
+#ifdef CONFIG_SMP
+#define SMP_NOP2 "nop; nop;\n\t"
+#define SMP_NOP3 "nop; nop; nop;\n\t"
+#else
+#define SMP_NOP2
+#define SMP_NOP3
+#endif /* SMP */
+unsigned long __raw_local_irq_save(void)
+{
+	unsigned long retval;
+	unsigned long tmp;
+
+	__asm__ __volatile__(
+		"rd	%%psr, %0\n\t"
+		SMP_NOP3	/* Sun4m + Cypress + SMP bug */
+		"or	%0, %2, %1\n\t"
+		"wr	%1, 0, %%psr\n\t"
+		"nop; nop; nop\n"
+		: "=&r" (retval), "=r" (tmp)
+		: "i" (PSR_PIL)
+		: "memory");
+
+	return retval;
+}
+
+void raw_local_irq_enable(void)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__(
+		"rd	%%psr, %0\n\t"
+		SMP_NOP3	/* Sun4m + Cypress + SMP bug */
+		"andn	%0, %1, %0\n\t"
+		"wr	%0, 0, %%psr\n\t"
+		"nop; nop; nop\n"
+		: "=&r" (tmp)
+		: "i" (PSR_PIL)
+		: "memory");
+}
+
+void raw_local_irq_restore(unsigned long old_psr)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__(
+		"rd	%%psr, %0\n\t"
+		"and	%2, %1, %2\n\t"
+		SMP_NOP2	/* Sun4m + Cypress + SMP bug */
+		"andn	%0, %1, %0\n\t"
+		"wr	%0, %2, %%psr\n\t"
+		"nop; nop; nop\n"
+		: "=&r" (tmp)
+		: "i" (PSR_PIL), "r" (old_psr)
+		: "memory");
+}
+
+EXPORT_SYMBOL(__raw_local_irq_save);
+EXPORT_SYMBOL(raw_local_irq_enable);
+EXPORT_SYMBOL(raw_local_irq_restore);
+
+/*
+ * Dave Redman (djhr@tadpole.co.uk)
+ *
+ * IRQ numbers.. These are no longer restricted to 15..
+ *
+ * this is done to enable SBUS cards and onboard IO to be masked
+ * correctly. using the interrupt level isn't good enough.
+ *
+ * For example:
+ *   A device interrupting at sbus level6 and the Floppy both come in
+ *   at IRQ11, but enabling and disabling them requires writing to
+ *   different bits in the SLAVIO/SEC.
+ *
+ * As a result of these changes sun4m machines could now support
+ * directed CPU interrupts using the existing enable/disable irq code
+ * with tweaks.
+ *
+ */
+
+static void irq_panic(void)
+{
+    extern char *cputypval;
+    prom_printf("machine: %s doesn't have irq handlers defined!\n",cputypval);
+    prom_halt();
+}
+
+void (*sparc_init_timers)(irq_handler_t ) =
+    (void (*)(irq_handler_t )) irq_panic;
+
+/*
+ * Dave Redman (djhr@tadpole.co.uk)
+ *
+ * There used to be extern calls and hard coded values here.. very sucky!
+ * instead, because some of the devices attach very early, I do something
+ * equally sucky but at least we'll never try to free statically allocated
+ * space or call kmalloc before kmalloc_init :(.
+ * 
+ * In fact it's the timer10 that attaches first.. then timer14
+ * then kmalloc_init is called.. then the tty interrupts attach.
+ * hmmm....
+ *
+ */
+#define MAX_STATIC_ALLOC	4
+struct irqaction static_irqaction[MAX_STATIC_ALLOC];
+int static_irq_count;
+
+static struct {
+	struct irqaction *action;
+	int flags;
+} sparc_irq[NR_IRQS];
+#define SPARC_IRQ_INPROGRESS 1
+
+/* Used to protect the IRQ action lists */
+DEFINE_SPINLOCK(irq_action_lock);
+
+int show_interrupts(struct seq_file *p, void *v)
+{
+	int i = *(loff_t *) v;
+	struct irqaction * action;
+	unsigned long flags;
+#ifdef CONFIG_SMP
+	int j;
+#endif
+
+	if (sparc_cpu_model == sun4d) {
+		extern int show_sun4d_interrupts(struct seq_file *, void *);
+		
+		return show_sun4d_interrupts(p, v);
+	}
+	spin_lock_irqsave(&irq_action_lock, flags);
+	if (i < NR_IRQS) {
+		action = sparc_irq[i].action;
+		if (!action) 
+			goto out_unlock;
+		seq_printf(p, "%3d: ", i);
+#ifndef CONFIG_SMP
+		seq_printf(p, "%10u ", kstat_irqs(i));
+#else
+		for_each_online_cpu(j) {
+			seq_printf(p, "%10u ",
+				    kstat_cpu(j).irqs[i]);
+		}
+#endif
+		seq_printf(p, " %c %s",
+			(action->flags & IRQF_DISABLED) ? '+' : ' ',
+			action->name);
+		for (action=action->next; action; action = action->next) {
+			seq_printf(p, ",%s %s",
+				(action->flags & IRQF_DISABLED) ? " +" : "",
+				action->name);
+		}
+		seq_putc(p, '\n');
+	}
+out_unlock:
+	spin_unlock_irqrestore(&irq_action_lock, flags);
+	return 0;
+}
+
+void free_irq(unsigned int irq, void *dev_id)
+{
+	struct irqaction * action;
+	struct irqaction **actionp;
+        unsigned long flags;
+	unsigned int cpu_irq;
+	
+	if (sparc_cpu_model == sun4d) {
+		extern void sun4d_free_irq(unsigned int, void *);
+		
+		sun4d_free_irq(irq, dev_id);
+		return;
+	}
+	cpu_irq = irq & (NR_IRQS - 1);
+        if (cpu_irq > 14) {  /* 14 irq levels on the sparc */
+                printk("Trying to free bogus IRQ %d\n", irq);
+                return;
+        }
+
+	spin_lock_irqsave(&irq_action_lock, flags);
+
+	actionp = &sparc_irq[cpu_irq].action;
+	action = *actionp;
+
+	if (!action->handler) {
+		printk("Trying to free free IRQ%d\n",irq);
+		goto out_unlock;
+	}
+	if (dev_id) {
+		for (; action; action = action->next) {
+			if (action->dev_id == dev_id)
+				break;
+			actionp = &action->next;
+		}
+		if (!action) {
+			printk("Trying to free free shared IRQ%d\n",irq);
+			goto out_unlock;
+		}
+	} else if (action->flags & IRQF_SHARED) {
+		printk("Trying to free shared IRQ%d with NULL device ID\n", irq);
+		goto out_unlock;
+	}
+	if (action->flags & SA_STATIC_ALLOC)
+	{
+		/* This interrupt is marked as specially allocated
+		 * so it is a bad idea to free it.
+		 */
+		printk("Attempt to free statically allocated IRQ%d (%s)\n",
+		       irq, action->name);
+		goto out_unlock;
+	}
+
+	*actionp = action->next;
+
+	spin_unlock_irqrestore(&irq_action_lock, flags);
+
+	synchronize_irq(irq);
+
+	spin_lock_irqsave(&irq_action_lock, flags);
+
+	kfree(action);
+
+	if (!sparc_irq[cpu_irq].action)
+		__disable_irq(irq);
+
+out_unlock:
+	spin_unlock_irqrestore(&irq_action_lock, flags);
+}
+
+EXPORT_SYMBOL(free_irq);
+
+/*
+ * This is called when we want to synchronize with
+ * interrupts. We may for example tell a device to
+ * stop sending interrupts: but to make sure there
+ * are no interrupts that are executing on another
+ * CPU we need to call this function.
+ */
+#ifdef CONFIG_SMP
+void synchronize_irq(unsigned int irq)
+{
+	unsigned int cpu_irq;
+
+	cpu_irq = irq & (NR_IRQS - 1);
+	while (sparc_irq[cpu_irq].flags & SPARC_IRQ_INPROGRESS)
+		cpu_relax();
+}
+#endif /* SMP */
+
+void unexpected_irq(int irq, void *dev_id, struct pt_regs * regs)
+{
+        int i;
+	struct irqaction * action;
+	unsigned int cpu_irq;
+	
+	cpu_irq = irq & (NR_IRQS - 1);
+	action = sparc_irq[cpu_irq].action;
+
+        printk("IO device interrupt, irq = %d\n", irq);
+        printk("PC = %08lx NPC = %08lx FP=%08lx\n", regs->pc, 
+		    regs->npc, regs->u_regs[14]);
+	if (action) {
+		printk("Expecting: ");
+        	for (i = 0; i < 16; i++)
+                	if (action->handler)
+                        	printk("[%s:%d:0x%x] ", action->name,
+				       (int) i, (unsigned int) action->handler);
+	}
+        printk("AIEEE\n");
+	panic("bogus interrupt received");
+}
+
+void handler_irq(int irq, struct pt_regs * regs)
+{
+	struct pt_regs *old_regs;
+	struct irqaction * action;
+	int cpu = smp_processor_id();
+#ifdef CONFIG_SMP
+	extern void smp4m_irq_rotate(int cpu);
+#endif
+
+	old_regs = set_irq_regs(regs);
+	irq_enter();
+	disable_pil_irq(irq);
+#ifdef CONFIG_SMP
+	/* Only rotate on lower priority IRQs (scsi, ethernet, etc.). */
+	if((sparc_cpu_model==sun4m) && (irq < 10))
+		smp4m_irq_rotate(cpu);
+#endif
+	action = sparc_irq[irq].action;
+	sparc_irq[irq].flags |= SPARC_IRQ_INPROGRESS;
+	kstat_cpu(cpu).irqs[irq]++;
+	do {
+		if (!action || !action->handler)
+			unexpected_irq(irq, NULL, regs);
+		action->handler(irq, action->dev_id);
+		action = action->next;
+	} while (action);
+	sparc_irq[irq].flags &= ~SPARC_IRQ_INPROGRESS;
+	enable_pil_irq(irq);
+	irq_exit();
+	set_irq_regs(old_regs);
+}
+
+#if defined(CONFIG_BLK_DEV_FD) || defined(CONFIG_BLK_DEV_FD_MODULE)
+
+/* Fast IRQs on the Sparc can only have one routine attached to them,
+ * thus no sharing possible.
+ */
+static int request_fast_irq(unsigned int irq,
+			    void (*handler)(void),
+			    unsigned long irqflags, const char *devname)
+{
+	struct irqaction *action;
+	unsigned long flags;
+	unsigned int cpu_irq;
+	int ret;
+#ifdef CONFIG_SMP
+	struct tt_entry *trap_table;
+	extern struct tt_entry trapbase_cpu1, trapbase_cpu2, trapbase_cpu3;
+#endif
+	
+	cpu_irq = irq & (NR_IRQS - 1);
+	if(cpu_irq > 14) {
+		ret = -EINVAL;
+		goto out;
+	}
+	if(!handler) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	spin_lock_irqsave(&irq_action_lock, flags);
+
+	action = sparc_irq[cpu_irq].action;
+	if(action) {
+		if(action->flags & IRQF_SHARED)
+			panic("Trying to register fast irq when already shared.\n");
+		if(irqflags & IRQF_SHARED)
+			panic("Trying to register fast irq as shared.\n");
+
+		/* Anyway, someone already owns it so cannot be made fast. */
+		printk("request_fast_irq: Trying to register yet already owned.\n");
+		ret = -EBUSY;
+		goto out_unlock;
+	}
+
+	/* If this is flagged as statically allocated then we use our
+	 * private struct which is never freed.
+	 */
+	if (irqflags & SA_STATIC_ALLOC) {
+	    if (static_irq_count < MAX_STATIC_ALLOC)
+		action = &static_irqaction[static_irq_count++];
+	    else
+		printk("Fast IRQ%d (%s) SA_STATIC_ALLOC failed using kmalloc\n",
+		       irq, devname);
+	}
+	
+	if (action == NULL)
+	    action = kmalloc(sizeof(struct irqaction),
+						 GFP_ATOMIC);
+	
+	if (!action) { 
+		ret = -ENOMEM;
+		goto out_unlock;
+	}
+
+	/* Dork with trap table if we get this far. */
+#define INSTANTIATE(table) \
+	table[SP_TRAP_IRQ1+(cpu_irq-1)].inst_one = SPARC_RD_PSR_L0; \
+	table[SP_TRAP_IRQ1+(cpu_irq-1)].inst_two = \
+		SPARC_BRANCH((unsigned long) handler, \
+			     (unsigned long) &table[SP_TRAP_IRQ1+(cpu_irq-1)].inst_two);\
+	table[SP_TRAP_IRQ1+(cpu_irq-1)].inst_three = SPARC_RD_WIM_L3; \
+	table[SP_TRAP_IRQ1+(cpu_irq-1)].inst_four = SPARC_NOP;
+
+	INSTANTIATE(sparc_ttable)
+#ifdef CONFIG_SMP
+	trap_table = &trapbase_cpu1; INSTANTIATE(trap_table)
+	trap_table = &trapbase_cpu2; INSTANTIATE(trap_table)
+	trap_table = &trapbase_cpu3; INSTANTIATE(trap_table)
+#endif
+#undef INSTANTIATE
+	/*
+	 * XXX Correct thing whould be to flush only I- and D-cache lines
+	 * which contain the handler in question. But as of time of the
+	 * writing we have no CPU-neutral interface to fine-grained flushes.
+	 */
+	flush_cache_all();
+
+	action->flags = irqflags;
+	cpus_clear(action->mask);
+	action->name = devname;
+	action->dev_id = NULL;
+	action->next = NULL;
+
+	sparc_irq[cpu_irq].action = action;
+
+	__enable_irq(irq);
+
+	ret = 0;
+out_unlock:
+	spin_unlock_irqrestore(&irq_action_lock, flags);
+out:
+	return ret;
+}
+
+/* These variables are used to access state from the assembler
+ * interrupt handler, floppy_hardint, so we cannot put these in
+ * the floppy driver image because that would not work in the
+ * modular case.
+ */
+volatile unsigned char *fdc_status;
+EXPORT_SYMBOL(fdc_status);
+
+char *pdma_vaddr;
+EXPORT_SYMBOL(pdma_vaddr);
+
+unsigned long pdma_size;
+EXPORT_SYMBOL(pdma_size);
+
+volatile int doing_pdma;
+EXPORT_SYMBOL(doing_pdma);
+
+char *pdma_base;
+EXPORT_SYMBOL(pdma_base);
+
+unsigned long pdma_areasize;
+EXPORT_SYMBOL(pdma_areasize);
+
+extern void floppy_hardint(void);
+
+static irq_handler_t floppy_irq_handler;
+
+void sparc_floppy_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct pt_regs *old_regs;
+	int cpu = smp_processor_id();
+
+	old_regs = set_irq_regs(regs);
+	disable_pil_irq(irq);
+	irq_enter();
+	kstat_cpu(cpu).irqs[irq]++;
+	floppy_irq_handler(irq, dev_id);
+	irq_exit();
+	enable_pil_irq(irq);
+	set_irq_regs(old_regs);
+	// XXX Eek, it's totally changed with preempt_count() and such
+	// if (softirq_pending(cpu))
+	//	do_softirq();
+}
+
+int sparc_floppy_request_irq(int irq, unsigned long flags,
+			     irq_handler_t irq_handler)
+{
+	floppy_irq_handler = irq_handler;
+	return request_fast_irq(irq, floppy_hardint, flags, "floppy");
+}
+EXPORT_SYMBOL(sparc_floppy_request_irq);
+
+#endif
+
+int request_irq(unsigned int irq,
+		irq_handler_t handler,
+		unsigned long irqflags, const char * devname, void *dev_id)
+{
+	struct irqaction * action, **actionp;
+	unsigned long flags;
+	unsigned int cpu_irq;
+	int ret;
+	
+	if (sparc_cpu_model == sun4d) {
+		extern int sun4d_request_irq(unsigned int, 
+					     irq_handler_t ,
+					     unsigned long, const char *, void *);
+		return sun4d_request_irq(irq, handler, irqflags, devname, dev_id);
+	}
+	cpu_irq = irq & (NR_IRQS - 1);
+	if(cpu_irq > 14) {
+		ret = -EINVAL;
+		goto out;
+	}
+	if (!handler) {
+		ret = -EINVAL;
+		goto out;
+	}
+	    
+	spin_lock_irqsave(&irq_action_lock, flags);
+
+	actionp = &sparc_irq[cpu_irq].action;
+	action = *actionp;
+	if (action) {
+		if (!(action->flags & IRQF_SHARED) || !(irqflags & IRQF_SHARED)) {
+			ret = -EBUSY;
+			goto out_unlock;
+		}
+		if ((action->flags & IRQF_DISABLED) != (irqflags & IRQF_DISABLED)) {
+			printk("Attempt to mix fast and slow interrupts on IRQ%d denied\n", irq);
+			ret = -EBUSY;
+			goto out_unlock;
+		}
+		for ( ; action; action = *actionp)
+			actionp = &action->next;
+	}
+
+	/* If this is flagged as statically allocated then we use our
+	 * private struct which is never freed.
+	 */
+	if (irqflags & SA_STATIC_ALLOC) {
+		if (static_irq_count < MAX_STATIC_ALLOC)
+			action = &static_irqaction[static_irq_count++];
+		else
+			printk("Request for IRQ%d (%s) SA_STATIC_ALLOC failed using kmalloc\n", irq, devname);
+	}
+	
+	if (action == NULL)
+		action = kmalloc(sizeof(struct irqaction),
+						     GFP_ATOMIC);
+	
+	if (!action) { 
+		ret = -ENOMEM;
+		goto out_unlock;
+	}
+
+	action->handler = handler;
+	action->flags = irqflags;
+	cpus_clear(action->mask);
+	action->name = devname;
+	action->next = NULL;
+	action->dev_id = dev_id;
+
+	*actionp = action;
+
+	__enable_irq(irq);
+
+	ret = 0;
+out_unlock:
+	spin_unlock_irqrestore(&irq_action_lock, flags);
+out:
+	return ret;
+}
+
+EXPORT_SYMBOL(request_irq);
+
+void disable_irq_nosync(unsigned int irq)
+{
+	return __disable_irq(irq);
+}
+EXPORT_SYMBOL(disable_irq_nosync);
+
+void disable_irq(unsigned int irq)
+{
+	return __disable_irq(irq);
+}
+EXPORT_SYMBOL(disable_irq);
+
+void enable_irq(unsigned int irq)
+{
+	return __enable_irq(irq);
+}
+
+EXPORT_SYMBOL(enable_irq);
+
+/* We really don't need these at all on the Sparc.  We only have
+ * stubs here because they are exported to modules.
+ */
+unsigned long probe_irq_on(void)
+{
+	return 0;
+}
+
+EXPORT_SYMBOL(probe_irq_on);
+
+int probe_irq_off(unsigned long mask)
+{
+	return 0;
+}
+
+EXPORT_SYMBOL(probe_irq_off);
+
+/* djhr
+ * This could probably be made indirect too and assigned in the CPU
+ * bits of the code. That would be much nicer I think and would also
+ * fit in with the idea of being able to tune your kernel for your machine
+ * by removing unrequired machine and device support.
+ *
+ */
+
+void __init init_IRQ(void)
+{
+	extern void sun4c_init_IRQ( void );
+	extern void sun4m_init_IRQ( void );
+	extern void sun4d_init_IRQ( void );
+
+	switch(sparc_cpu_model) {
+	case sun4c:
+	case sun4:
+		sun4c_init_IRQ();
+		break;
+
+	case sun4m:
+#ifdef CONFIG_PCI
+		pcic_probe();
+		if (pcic_present()) {
+			sun4m_pci_init_IRQ();
+			break;
+		}
+#endif
+		sun4m_init_IRQ();
+		break;
+		
+	case sun4d:
+		sun4d_init_IRQ();
+		break;
+
+	default:
+		prom_printf("Cannot initialize IRQs on this Sun machine...");
+		break;
+	}
+	btfixup();
+}
+
+void init_irq_proc(void)
+{
+	/* For now, nothing... */
+}