Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 428 insertions, 0 deletions

diff --git a/arch/sparc/kernel/wof.S b/arch/sparc/kernel/wof.S
new file mode 100644
index 000000000000..083b1215d515
--- /dev/null
+++ b/arch/sparc/kernel/wof.S
@@ -0,0 +1,428 @@
+/* $Id: wof.S,v 1.40 2000/01/08 16:38:18 anton Exp $
+ * wof.S: Sparc window overflow handler.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#include <asm/contregs.h>
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include <asm/psr.h>
+#include <asm/smp.h>
+#include <asm/asi.h>
+#include <asm/winmacro.h>
+#include <asm/asmmacro.h>
+#include <asm/thread_info.h>
+
+/* WARNING: This routine is hairy and _very_ complicated, but it
+ *          must be as fast as possible as it handles the allocation
+ *          of register windows to the user and kernel.  If you touch
+ *          this code be _very_ careful as many other pieces of the
+ *          kernel depend upon how this code behaves.  You have been
+ *          duly warned...
+ */
+
+/* We define macro's for registers which have a fixed
+ * meaning throughout this entire routine.  The 'T' in
+ * the comments mean that the register can only be
+ * accessed when in the 'trap' window, 'G' means
+ * accessible in any window.  Do not change these registers
+ * after they have been set, until you are ready to return
+ * from the trap.
+ */
+#define t_psr       l0 /* %psr at trap time                     T */
+#define t_pc        l1 /* PC for trap return                    T */
+#define t_npc       l2 /* NPC for trap return                   T */
+#define t_wim       l3 /* %wim at trap time                     T */
+#define saved_g5    l5 /* Global save register                  T */
+#define saved_g6    l6 /* Global save register                  T */
+#define curptr      g6 /* Gets set to 'current' then stays      G */
+
+/* Now registers whose values can change within the handler.      */
+#define twin_tmp    l4 /* Temp reg, only usable in trap window  T */
+#define glob_tmp    g5 /* Global temporary reg, usable anywhere G */
+
+	.text
+	.align	4
+	/* BEGINNING OF PATCH INSTRUCTIONS */
+	/* On a 7-window Sparc the boot code patches spnwin_*
+	 * instructions with the following ones.
+	 */
+	.globl	spnwin_patch1_7win, spnwin_patch2_7win, spnwin_patch3_7win
+spnwin_patch1_7win:	sll	%t_wim, 6, %glob_tmp
+spnwin_patch2_7win:	and	%glob_tmp, 0x7f, %glob_tmp
+spnwin_patch3_7win:	and	%twin_tmp, 0x7f, %twin_tmp
+	/* END OF PATCH INSTRUCTIONS */
+
+	/* The trap entry point has done the following:
+	 *
+	 * rd    %psr, %l0
+	 * rd    %wim, %l3
+	 * b     spill_window_entry
+	 * andcc %l0, PSR_PS, %g0
+	 */
+
+	/* Datum current_thread_info->uwinmask contains at all times a bitmask
+	 * where if any user windows are active, at least one bit will
+	 * be set in to mask.  If no user windows are active, the bitmask
+	 * will be all zeroes.
+	 */
+	.globl	spill_window_entry 
+	.globl	spnwin_patch1, spnwin_patch2, spnwin_patch3
+spill_window_entry:
+	/* LOCATION: Trap Window */
+
+	mov	%g5, %saved_g5		! save away global temp register
+	mov	%g6, %saved_g6		! save away 'current' ptr register
+
+	/* Compute what the new %wim will be if we save the
+	 * window properly in this trap handler.
+	 *
+	 * newwim = ((%wim>>1) | (%wim<<(nwindows - 1)));
+	 */
+		srl	%t_wim, 0x1, %twin_tmp
+spnwin_patch1:	sll	%t_wim, 7, %glob_tmp
+		or	%glob_tmp, %twin_tmp, %glob_tmp
+spnwin_patch2:	and	%glob_tmp, 0xff, %glob_tmp
+
+	/* The trap entry point has set the condition codes
+	 * up for us to see if this is from user or kernel.
+	 * Get the load of 'curptr' out of the way.
+	 */
+	LOAD_CURRENT(curptr, twin_tmp)
+
+	andcc	%t_psr, PSR_PS, %g0
+	be,a	spwin_fromuser				! all user wins, branch
+	 save	%g0, %g0, %g0				! Go where saving will occur
+	
+	/* See if any user windows are active in the set. */
+	ld	[%curptr + TI_UWINMASK], %twin_tmp	! grab win mask
+	orcc	%g0, %twin_tmp, %g0			! check for set bits
+	bne	spwin_exist_uwins			! yep, there are some
+	 andn	%twin_tmp, %glob_tmp, %twin_tmp		! compute new uwinmask
+
+	/* Save into the window which must be saved and do it.
+	 * Basically if we are here, this means that we trapped
+	 * from kernel mode with only kernel windows in the register
+	 * file.
+	 */
+	save	%g0, %g0, %g0		! save into the window to stash away
+	wr	%glob_tmp, 0x0, %wim	! set new %wim, this is safe now
+
+spwin_no_userwins_from_kernel:
+	/* LOCATION: Window to be saved */
+
+	STORE_WINDOW(sp)		! stash the window
+	restore	%g0, %g0, %g0		! go back into trap window
+
+	/* LOCATION: Trap window */
+	mov	%saved_g5, %g5		! restore %glob_tmp
+	mov	%saved_g6, %g6		! restore %curptr
+	wr	%t_psr, 0x0, %psr	! restore condition codes in %psr
+	WRITE_PAUSE			! waste some time
+	jmp	%t_pc			! Return from trap
+	rett	%t_npc			! we are done
+
+spwin_exist_uwins:
+	/* LOCATION: Trap window */
+
+	/* Wow, user windows have to be dealt with, this is dirty
+	 * and messy as all hell.  And difficult to follow if you
+	 * are approaching the infamous register window trap handling
+	 * problem for the first time. DON'T LOOK!
+	 *
+	 * Note that how the execution path works out, the new %wim
+	 * will be left for us in the global temporary register,
+	 * %glob_tmp.  We cannot set the new %wim first because we
+	 * need to save into the appropriate window without inducing
+	 * a trap (traps are off, we'd get a watchdog wheee)...
+	 * But first, store the new user window mask calculated
+	 * above.
+	 */
+	st	%twin_tmp, [%curptr + TI_UWINMASK]
+	save	%g0, %g0, %g0		! Go to where the saving will occur
+
+spwin_fromuser:
+	/* LOCATION: Window to be saved */
+	wr	%glob_tmp, 0x0, %wim	! Now it is safe to set new %wim
+
+	/* LOCATION: Window to be saved */
+
+	/* This instruction branches to a routine which will check
+	 * to validity of the users stack pointer by whatever means
+	 * are necessary.  This means that this is architecture
+	 * specific and thus this branch instruction will need to
+	 * be patched at boot time once the machine type is known.
+	 * This routine _shall not_ touch %curptr under any
+	 * circumstances whatsoever!  It will branch back to the
+	 * label 'spwin_good_ustack' if the stack is ok but still
+	 * needs to be dumped (SRMMU for instance will not need to
+	 * do this) or 'spwin_finish_up' if the stack is ok and the
+	 * registers have already been saved.  If the stack is found
+	 * to be bogus for some reason the routine shall branch to
+	 * the label 'spwin_user_stack_is_bolixed' which will take
+	 * care of things at that point.
+	 */
+	.globl	spwin_mmu_patchme
+spwin_mmu_patchme:	b	spwin_sun4c_stackchk
+				 andcc	%sp, 0x7, %g0
+
+spwin_good_ustack:
+	/* LOCATION: Window to be saved */
+
+	/* The users stack is ok and we can safely save it at
+	 * %sp.
+	 */
+	STORE_WINDOW(sp)
+
+spwin_finish_up:
+	restore	%g0, %g0, %g0		/* Back to trap window. */
+
+	/* LOCATION: Trap window */
+
+	/* We have spilled successfully, and we have properly stored
+	 * the appropriate window onto the stack.
+	 */
+
+	/* Restore saved globals */
+	mov	%saved_g5, %g5
+	mov	%saved_g6, %g6
+
+	wr	%t_psr, 0x0, %psr
+	WRITE_PAUSE
+	jmp	%t_pc
+	rett	%t_npc
+
+spwin_user_stack_is_bolixed:
+	/* LOCATION: Window to be saved */
+
+	/* Wheee, user has trashed his/her stack.  We have to decide
+	 * how to proceed based upon whether we came from kernel mode
+	 * or not.  If we came from kernel mode, toss the window into
+	 * a special buffer and proceed, the kernel _needs_ a window
+	 * and we could be in an interrupt handler so timing is crucial.
+	 * If we came from user land we build a full stack frame and call
+	 * c-code to gun down the process.
+	 */
+	rd	%psr, %glob_tmp
+	andcc	%glob_tmp, PSR_PS, %g0
+	bne	spwin_bad_ustack_from_kernel
+	 nop
+
+	/* Oh well, throw this one window into the per-task window
+	 * buffer, the first one.
+	 */
+	st	%sp, [%curptr + TI_RWIN_SPTRS]
+	STORE_WINDOW(curptr + TI_REG_WINDOW)
+	restore	%g0, %g0, %g0
+
+	/* LOCATION: Trap Window */
+
+	/* Back in the trap window, update winbuffer save count. */
+	mov	1, %twin_tmp
+	st	%twin_tmp, [%curptr + TI_W_SAVED]
+
+		/* Compute new user window mask.  What we are basically
+		 * doing is taking two windows, the invalid one at trap
+		 * time and the one we attempted to throw onto the users
+		 * stack, and saying that everything else is an ok user
+		 * window.  umask = ((~(%t_wim | %wim)) & valid_wim_bits)
+		 */
+		rd	%wim, %twin_tmp
+		or	%twin_tmp, %t_wim, %twin_tmp
+		not	%twin_tmp
+spnwin_patch3:	and	%twin_tmp, 0xff, %twin_tmp	! patched on 7win Sparcs
+		st	%twin_tmp, [%curptr + TI_UWINMASK]
+
+#define STACK_OFFSET (THREAD_SIZE - TRACEREG_SZ - STACKFRAME_SZ)
+
+	sethi	%hi(STACK_OFFSET), %sp
+	or	%sp, %lo(STACK_OFFSET), %sp
+	add	%curptr, %sp, %sp
+
+	/* Restore the saved globals and build a pt_regs frame. */
+	mov	%saved_g5, %g5
+	mov	%saved_g6, %g6
+	STORE_PT_ALL(sp, t_psr, t_pc, t_npc, g1)
+
+	sethi	%hi(STACK_OFFSET), %g6
+	or	%g6, %lo(STACK_OFFSET), %g6
+	sub	%sp, %g6, %g6		! curptr
+
+	/* Turn on traps and call c-code to deal with it. */
+	wr	%t_psr, PSR_ET, %psr
+	nop
+	call	window_overflow_fault
+	 nop
+
+	/* Return from trap if C-code actually fixes things, if it
+	 * doesn't then we never get this far as the process will
+	 * be given the look of death from Commander Peanut.
+	 */
+	b	ret_trap_entry
+	 clr	%l6
+
+spwin_bad_ustack_from_kernel:
+	/* LOCATION: Window to be saved */
+
+	/* The kernel provoked a spill window trap, but the window we
+	 * need to save is a user one and the process has trashed its
+	 * stack pointer.  We need to be quick, so we throw it into
+	 * a per-process window buffer until we can properly handle
+	 * this later on.
+	 */
+	SAVE_BOLIXED_USER_STACK(curptr, glob_tmp)
+	restore	%g0, %g0, %g0
+
+	/* LOCATION: Trap window */
+
+	/* Restore globals, condition codes in the %psr and
+	 * return from trap.  Note, restoring %g6 when returning
+	 * to kernel mode is not necessarily these days. ;-)
+	 */
+	mov	%saved_g5, %g5
+	mov	%saved_g6, %g6
+
+	wr	%t_psr, 0x0, %psr
+	WRITE_PAUSE
+
+	jmp	%t_pc
+	rett	%t_npc
+
+/* Undefine the register macros which would only cause trouble
+ * if used below.  This helps find 'stupid' coding errors that
+ * produce 'odd' behavior.  The routines below are allowed to
+ * make usage of glob_tmp and t_psr so we leave them defined.
+ */
+#undef twin_tmp
+#undef curptr
+#undef t_pc
+#undef t_npc
+#undef t_wim
+#undef saved_g5
+#undef saved_g6
+
+/* Now come the per-architecture window overflow stack checking routines.
+ * As noted above %curptr cannot be touched by this routine at all.
+ */
+
+	.globl	spwin_sun4c_stackchk
+spwin_sun4c_stackchk:
+	/* LOCATION: Window to be saved on the stack */
+
+	/* See if the stack is in the address space hole but first,
+	 * check results of callers andcc %sp, 0x7, %g0
+	 */
+	be	1f
+	 sra	%sp, 29, %glob_tmp
+
+	rd	%psr, %glob_tmp
+	b	spwin_user_stack_is_bolixed + 0x4
+	 nop
+
+1:
+	add	%glob_tmp, 0x1, %glob_tmp
+	andncc	%glob_tmp, 0x1, %g0
+	be	1f
+	 and	%sp, 0xfff, %glob_tmp		! delay slot
+
+	rd	%psr, %glob_tmp
+	b	spwin_user_stack_is_bolixed + 0x4
+	 nop
+
+	/* See if our dump area will be on more than one
+	 * page.
+	 */
+1:
+	add	%glob_tmp, 0x38, %glob_tmp
+	andncc	%glob_tmp, 0xff8, %g0
+	be	spwin_sun4c_onepage		! only one page to check
+	 lda	[%sp] ASI_PTE, %glob_tmp	! have to check first page anyways
+
+spwin_sun4c_twopages:
+	/* Is first page ok permission wise? */
+	srl	%glob_tmp, 29, %glob_tmp
+	cmp	%glob_tmp, 0x6
+	be	1f
+	 add	%sp, 0x38, %glob_tmp	/* Is second page in vma hole? */
+
+	rd	%psr, %glob_tmp
+	b	spwin_user_stack_is_bolixed + 0x4
+	 nop
+
+1:
+	sra	%glob_tmp, 29, %glob_tmp
+	add	%glob_tmp, 0x1, %glob_tmp
+	andncc	%glob_tmp, 0x1, %g0
+	be	1f
+	 add	%sp, 0x38, %glob_tmp
+
+	rd	%psr, %glob_tmp
+	b	spwin_user_stack_is_bolixed + 0x4
+	 nop
+
+1:
+	lda	[%glob_tmp] ASI_PTE, %glob_tmp
+
+spwin_sun4c_onepage:
+	srl	%glob_tmp, 29, %glob_tmp
+	cmp	%glob_tmp, 0x6				! can user write to it?
+	be	spwin_good_ustack			! success
+	 nop
+
+	rd	%psr, %glob_tmp
+	b	spwin_user_stack_is_bolixed + 0x4
+	 nop
+
+	/* This is a generic SRMMU routine.  As far as I know this
+	 * works for all current v8/srmmu implementations, we'll
+	 * see...
+	 */
+	.globl	spwin_srmmu_stackchk
+spwin_srmmu_stackchk:
+	/* LOCATION: Window to be saved on the stack */
+
+	/* Because of SMP concerns and speed we play a trick.
+	 * We disable fault traps in the MMU control register,
+	 * Execute the stores, then check the fault registers
+	 * to see what happens.  I can hear Linus now
+	 * "disgusting... broken hardware...".
+	 *
+	 * But first, check to see if the users stack has ended
+	 * up in kernel vma, then we would succeed for the 'wrong'
+	 * reason... ;(  Note that the 'sethi' below assumes the
+	 * kernel is page aligned, which should always be the case.
+	 */
+	/* Check results of callers andcc %sp, 0x7, %g0 */
+	bne	spwin_user_stack_is_bolixed
+	 sethi   %hi(PAGE_OFFSET), %glob_tmp
+	cmp	%glob_tmp, %sp
+	bleu	spwin_user_stack_is_bolixed
+	 mov	AC_M_SFSR, %glob_tmp
+
+	/* Clear the fault status and turn on the no_fault bit. */
+	lda	[%glob_tmp] ASI_M_MMUREGS, %g0		! eat SFSR
+
+	lda	[%g0] ASI_M_MMUREGS, %glob_tmp		! read MMU control
+	or	%glob_tmp, 0x2, %glob_tmp		! or in no_fault bit
+	sta	%glob_tmp, [%g0] ASI_M_MMUREGS		! set it
+
+	/* Dump the registers and cross fingers. */
+	STORE_WINDOW(sp)
+
+	/* Clear the no_fault bit and check the status. */
+	andn	%glob_tmp, 0x2, %glob_tmp
+	sta	%glob_tmp, [%g0] ASI_M_MMUREGS
+
+	mov	AC_M_SFAR, %glob_tmp
+	lda	[%glob_tmp] ASI_M_MMUREGS, %g0
+
+	mov	AC_M_SFSR, %glob_tmp
+	lda	[%glob_tmp] ASI_M_MMUREGS, %glob_tmp
+	andcc	%glob_tmp, 0x2, %g0			! did we fault?
+	be,a	spwin_finish_up + 0x4			! cool beans, success
+	 restore %g0, %g0, %g0
+
+	rd	%psr, %glob_tmp
+	b	spwin_user_stack_is_bolixed + 0x4	! we faulted, ugh
+	 nop