Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 782 insertions, 0 deletions

diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S
new file mode 100644
index 000000000000..8104a56ca2d8
--- /dev/null
+++ b/arch/sparc64/kernel/head.S
@@ -0,0 +1,782 @@
+/* $Id: head.S,v 1.87 2002/02/09 19:49:31 davem Exp $
+ * head.S: Initial boot code for the Sparc64 port of Linux.
+ *
+ * Copyright (C) 1996,1997 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996 David Sitsky (David.Sitsky@anu.edu.au)
+ * Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ * Copyright (C) 1997 Miguel de Icaza (miguel@nuclecu.unam.mx)
+ */
+
+#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/errno.h>
+#include <asm/thread_info.h>
+#include <asm/asi.h>
+#include <asm/pstate.h>
+#include <asm/ptrace.h>
+#include <asm/spitfire.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/errno.h>
+#include <asm/signal.h>
+#include <asm/processor.h>
+#include <asm/lsu.h>
+#include <asm/dcr.h>
+#include <asm/dcu.h>
+#include <asm/head.h>
+#include <asm/ttable.h>
+#include <asm/mmu.h>
+	
+/* This section from from _start to sparc64_boot_end should fit into
+ * 0x0000.0000.0040.4000 to 0x0000.0000.0040.8000 and will be sharing space
+ * with bootup_user_stack, which is from 0x0000.0000.0040.4000 to
+ * 0x0000.0000.0040.6000 and empty_bad_page, which is from
+ * 0x0000.0000.0040.6000 to 0x0000.0000.0040.8000. 
+ */
+
+	.text
+	.globl	start, _start, stext, _stext
+_start:
+start:
+_stext:
+stext:
+bootup_user_stack:
+! 0x0000000000404000
+	b	sparc64_boot
+	 flushw					/* Flush register file.      */
+
+/* This stuff has to be in sync with SILO and other potential boot loaders
+ * Fields should be kept upward compatible and whenever any change is made,
+ * HdrS version should be incremented.
+ */
+        .global root_flags, ram_flags, root_dev
+        .global sparc_ramdisk_image, sparc_ramdisk_size
+	.global sparc_ramdisk_image64
+
+        .ascii  "HdrS"
+        .word   LINUX_VERSION_CODE
+
+	/* History:
+	 *
+	 * 0x0300 : Supports being located at other than 0x4000
+	 * 0x0202 : Supports kernel params string
+	 * 0x0201 : Supports reboot_command
+	 */
+	.half   0x0301          /* HdrS version */
+
+root_flags:
+        .half   1
+root_dev:
+        .half   0
+ram_flags:
+        .half   0
+sparc_ramdisk_image:
+        .word   0
+sparc_ramdisk_size:
+        .word   0
+        .xword  reboot_command
+	.xword	bootstr_info
+sparc_ramdisk_image64:
+	.xword	0
+	.word	_end
+
+	/* We must be careful, 32-bit OpenBOOT will get confused if it
+	 * tries to save away a register window to a 64-bit kernel
+	 * stack address.  Flush all windows, disable interrupts,
+	 * remap if necessary, jump onto kernel trap table, then kernel
+	 * stack, or else we die.
+	 *
+	 * PROM entry point is on %o4
+	 */
+sparc64_boot:
+	BRANCH_IF_CHEETAH_BASE(g1,g7,cheetah_boot)
+	BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,g7,cheetah_plus_boot)
+	ba,pt	%xcc, spitfire_boot
+	 nop
+
+cheetah_plus_boot:
+	/* Preserve OBP chosen DCU and DCR register settings.  */
+	ba,pt	%xcc, cheetah_generic_boot
+	 nop
+
+cheetah_boot:
+	mov	DCR_BPE | DCR_RPE | DCR_SI | DCR_IFPOE | DCR_MS, %g1
+	wr	%g1, %asr18
+
+	sethi	%uhi(DCU_ME|DCU_RE|DCU_HPE|DCU_SPE|DCU_SL|DCU_WE), %g7
+	or	%g7, %ulo(DCU_ME|DCU_RE|DCU_HPE|DCU_SPE|DCU_SL|DCU_WE), %g7
+	sllx	%g7, 32, %g7
+	or	%g7, DCU_DM | DCU_IM | DCU_DC | DCU_IC, %g7
+	stxa	%g7, [%g0] ASI_DCU_CONTROL_REG
+	membar	#Sync
+
+cheetah_generic_boot:
+	mov	TSB_EXTENSION_P, %g3
+	stxa	%g0, [%g3] ASI_DMMU
+	stxa	%g0, [%g3] ASI_IMMU
+	membar	#Sync
+
+	mov	TSB_EXTENSION_S, %g3
+	stxa	%g0, [%g3] ASI_DMMU
+	membar	#Sync
+
+	mov	TSB_EXTENSION_N, %g3
+	stxa	%g0, [%g3] ASI_DMMU
+	stxa	%g0, [%g3] ASI_IMMU
+	membar	#Sync
+
+	wrpr    %g0, (PSTATE_PRIV|PSTATE_PEF|PSTATE_IE), %pstate
+	wr	%g0, 0, %fprs
+
+	/* Just like for Spitfire, we probe itlb-2 for a mapping which
+	 * matches our current %pc.  We take the physical address in
+	 * that mapping and use it to make our own.
+	 */
+
+	/* %g5 holds the tlb data */
+        sethi   %uhi(_PAGE_VALID | _PAGE_SZ4MB), %g5
+        sllx    %g5, 32, %g5
+        or      %g5, (_PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_L | _PAGE_W | _PAGE_G), %g5
+
+	/* Put PADDR tlb data mask into %g3. */
+	sethi	%uhi(_PAGE_PADDR), %g3
+	or	%g3, %ulo(_PAGE_PADDR), %g3
+	sllx	%g3, 32, %g3
+	sethi	%hi(_PAGE_PADDR), %g7
+	or	%g7, %lo(_PAGE_PADDR), %g7
+	or	%g3, %g7, %g3
+
+	set	2 << 16, %l0		/* TLB entry walker. */
+	set	0x1fff, %l2		/* Page mask. */
+	rd	%pc, %l3
+	andn	%l3, %l2, %g2		/* vaddr comparator */
+
+1:	ldxa	[%l0] ASI_ITLB_TAG_READ, %g1
+	membar	#Sync
+	andn	%g1, %l2, %g1
+	cmp	%g1, %g2
+	be,pn	%xcc, cheetah_got_tlbentry
+	 nop
+	and	%l0, (127 << 3), %g1
+	cmp	%g1, (127 << 3)
+	blu,pt	%xcc, 1b
+	 add	%l0, (1 << 3), %l0
+
+	/* Search the small TLB.  OBP never maps us like that but
+	 * newer SILO can.
+	 */
+	clr	%l0
+
+1:	ldxa	[%l0] ASI_ITLB_TAG_READ, %g1
+	membar	#Sync
+	andn	%g1, %l2, %g1
+	cmp	%g1, %g2
+	be,pn	%xcc, cheetah_got_tlbentry
+	 nop
+	cmp	%l0, (15 << 3)
+	blu,pt	%xcc, 1b
+	 add	%l0, (1 << 3), %l0
+
+	/* BUG() if we get here... */
+	ta	0x5
+
+cheetah_got_tlbentry:
+	ldxa	[%l0] ASI_ITLB_DATA_ACCESS, %g0
+	ldxa	[%l0] ASI_ITLB_DATA_ACCESS, %g1
+	membar	#Sync
+	and	%g1, %g3, %g1
+	set	0x5fff, %l0
+	andn	%g1, %l0, %g1
+	or	%g5, %g1, %g5
+
+	/* Clear out any KERNBASE area entries. */
+	set	2 << 16, %l0
+	sethi	%hi(KERNBASE), %g3
+	sethi	%hi(KERNBASE<<1), %g7
+	mov	TLB_TAG_ACCESS, %l7
+
+	/* First, check ITLB */
+1:	ldxa	[%l0] ASI_ITLB_TAG_READ, %g1
+	membar	#Sync
+	andn	%g1, %l2, %g1
+	cmp	%g1, %g3
+	blu,pn	%xcc, 2f
+	 cmp	%g1, %g7
+	bgeu,pn	%xcc, 2f
+	 nop
+	stxa	%g0, [%l7] ASI_IMMU
+	membar	#Sync
+	stxa	%g0, [%l0] ASI_ITLB_DATA_ACCESS
+	membar	#Sync
+
+2:	and	%l0, (127 << 3), %g1
+	cmp	%g1, (127 << 3)
+	blu,pt	%xcc, 1b
+	 add	%l0, (1 << 3), %l0
+
+	/* Next, check DTLB */
+	set	2 << 16, %l0
+1:	ldxa	[%l0] ASI_DTLB_TAG_READ, %g1
+	membar	#Sync
+	andn	%g1, %l2, %g1
+	cmp	%g1, %g3
+	blu,pn	%xcc, 2f
+	 cmp	%g1, %g7
+	bgeu,pn	%xcc, 2f
+	 nop
+	stxa	%g0, [%l7] ASI_DMMU
+	membar	#Sync
+	stxa	%g0, [%l0] ASI_DTLB_DATA_ACCESS
+	membar	#Sync
+	
+2:	and	%l0, (511 << 3), %g1
+	cmp	%g1, (511 << 3)
+	blu,pt	%xcc, 1b
+	 add	%l0, (1 << 3), %l0
+
+	/* On Cheetah+, have to check second DTLB.  */
+	BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,l0,2f)
+	ba,pt	%xcc, 9f
+	 nop
+
+2:	set	3 << 16, %l0
+1:	ldxa	[%l0] ASI_DTLB_TAG_READ, %g1
+	membar	#Sync
+	andn	%g1, %l2, %g1
+	cmp	%g1, %g3
+	blu,pn	%xcc, 2f
+	 cmp	%g1, %g7
+	bgeu,pn	%xcc, 2f
+	 nop
+	stxa	%g0, [%l7] ASI_DMMU
+	membar	#Sync
+	stxa	%g0, [%l0] ASI_DTLB_DATA_ACCESS
+	membar	#Sync
+	
+2:	and	%l0, (511 << 3), %g1
+	cmp	%g1, (511 << 3)
+	blu,pt	%xcc, 1b
+	 add	%l0, (1 << 3), %l0
+
+9:
+
+	/* Now lock the TTE we created into ITLB-0 and DTLB-0,
+	 * entry 15 (and maybe 14 too).
+	 */
+	sethi	%hi(KERNBASE), %g3
+	set	(0 << 16) | (15 << 3), %g7
+	stxa	%g3, [%l7] ASI_DMMU
+	membar	#Sync
+	stxa	%g5, [%g7] ASI_DTLB_DATA_ACCESS
+	membar	#Sync
+	stxa	%g3, [%l7] ASI_IMMU
+	membar	#Sync
+	stxa	%g5, [%g7] ASI_ITLB_DATA_ACCESS
+	membar	#Sync
+	flush	%g3
+	membar	#Sync
+	sethi	%hi(_end), %g3			/* Check for bigkernel case */
+	or	%g3, %lo(_end), %g3
+	srl	%g3, 23, %g3			/* Check if _end > 8M */
+	brz,pt	%g3, 1f
+	 sethi	%hi(KERNBASE), %g3		/* Restore for fixup code below */
+	sethi	%hi(0x400000), %g3
+	or	%g3, %lo(0x400000), %g3
+	add	%g5, %g3, %g5			/* New tte data */
+	andn	%g5, (_PAGE_G), %g5
+	sethi	%hi(KERNBASE+0x400000), %g3
+	or	%g3, %lo(KERNBASE+0x400000), %g3
+	set	(0 << 16) | (14 << 3), %g7
+	stxa	%g3, [%l7] ASI_DMMU
+	membar	#Sync
+	stxa	%g5, [%g7] ASI_DTLB_DATA_ACCESS
+	membar	#Sync
+	stxa	%g3, [%l7] ASI_IMMU
+	membar	#Sync
+	stxa	%g5, [%g7] ASI_ITLB_DATA_ACCESS
+	membar	#Sync
+	flush	%g3
+	membar	#Sync
+	sethi	%hi(KERNBASE), %g3		/* Restore for fixup code below */
+	ba,pt	%xcc, 1f
+	 nop
+
+1:	set	sun4u_init, %g2
+	jmpl    %g2 + %g0, %g0
+	 nop
+
+spitfire_boot:
+	/* Typically PROM has already enabled both MMU's and both on-chip
+	 * caches, but we do it here anyway just to be paranoid.
+	 */
+	mov	(LSU_CONTROL_IC|LSU_CONTROL_DC|LSU_CONTROL_IM|LSU_CONTROL_DM), %g1
+	stxa	%g1, [%g0] ASI_LSU_CONTROL
+	membar	#Sync
+
+	/*
+	 * Make sure we are in privileged mode, have address masking,
+         * using the ordinary globals and have enabled floating
+         * point.
+	 *
+	 * Again, typically PROM has left %pil at 13 or similar, and
+	 * (PSTATE_PRIV | PSTATE_PEF | PSTATE_IE) in %pstate.
+         */
+	wrpr    %g0, (PSTATE_PRIV|PSTATE_PEF|PSTATE_IE), %pstate
+	wr	%g0, 0, %fprs
+
+spitfire_create_mappings:
+	/* %g5 holds the tlb data */
+        sethi   %uhi(_PAGE_VALID | _PAGE_SZ4MB), %g5
+        sllx    %g5, 32, %g5
+        or      %g5, (_PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_L | _PAGE_W | _PAGE_G), %g5
+
+	/* Base of physical memory cannot reliably be assumed to be
+	 * at 0x0!  Figure out where it happens to be. -DaveM
+	 */
+
+	/* Put PADDR tlb data mask into %g3. */
+	sethi	%uhi(_PAGE_PADDR_SF), %g3
+	or	%g3, %ulo(_PAGE_PADDR_SF), %g3
+	sllx	%g3, 32, %g3
+	sethi	%hi(_PAGE_PADDR_SF), %g7
+	or	%g7, %lo(_PAGE_PADDR_SF), %g7
+	or	%g3, %g7, %g3
+
+	/* Walk through entire ITLB, looking for entry which maps
+	 * our %pc currently, stick PADDR from there into %g5 tlb data.
+	 */
+	clr	%l0			/* TLB entry walker. */
+	set	0x1fff, %l2		/* Page mask. */
+	rd	%pc, %l3
+	andn	%l3, %l2, %g2		/* vaddr comparator */
+1:
+	/* Yes, the nops seem to be necessary for now, don't ask me why. -DaveM */
+	ldxa	[%l0] ASI_ITLB_TAG_READ, %g1
+	nop
+	nop
+	nop
+	andn	%g1, %l2, %g1		/* Get vaddr */
+	cmp	%g1, %g2
+	be,a,pn	%xcc, spitfire_got_tlbentry
+	 ldxa	[%l0] ASI_ITLB_DATA_ACCESS, %g1
+	cmp	%l0, (63 << 3)
+	blu,pt	%xcc, 1b
+	 add	%l0, (1 << 3), %l0
+
+	/* BUG() if we get here... */
+	ta	0x5
+
+spitfire_got_tlbentry:
+	/* Nops here again, perhaps Cheetah/Blackbird are better behaved... */
+	nop
+	nop
+	nop
+	and	%g1, %g3, %g1		/* Mask to just get paddr bits.       */
+	set	0x5fff, %l3		/* Mask offset to get phys base.      */
+	andn	%g1, %l3, %g1
+
+	/* NOTE: We hold on to %g1 paddr base as we need it below to lock
+	 * NOTE: the PROM cif code into the TLB.
+	 */
+
+	or	%g5, %g1, %g5		/* Or it into TAG being built.        */
+
+	clr	%l0			/* TLB entry walker. */
+	sethi	%hi(KERNBASE), %g3	/* 4M lower limit */
+	sethi	%hi(KERNBASE<<1), %g7	/* 8M upper limit */
+	mov	TLB_TAG_ACCESS, %l7
+1:
+	/* Yes, the nops seem to be necessary for now, don't ask me why. -DaveM */
+	ldxa	[%l0] ASI_ITLB_TAG_READ, %g1
+	nop
+	nop
+	nop
+	andn	%g1, %l2, %g1		/* Get vaddr */
+	cmp	%g1, %g3
+	blu,pn	%xcc, 2f
+	 cmp	%g1, %g7
+	bgeu,pn	%xcc, 2f
+	 nop
+	stxa	%g0, [%l7] ASI_IMMU
+	stxa	%g0, [%l0] ASI_ITLB_DATA_ACCESS
+	membar	#Sync
+2:
+	cmp	%l0, (63 << 3)
+	blu,pt	%xcc, 1b
+	 add	%l0, (1 << 3), %l0
+
+	nop; nop; nop
+
+	clr	%l0			/* TLB entry walker. */
+1:
+	/* Yes, the nops seem to be necessary for now, don't ask me why. -DaveM */
+	ldxa	[%l0] ASI_DTLB_TAG_READ, %g1
+	nop
+	nop
+	nop
+	andn	%g1, %l2, %g1		/* Get vaddr */
+	cmp	%g1, %g3
+	blu,pn	%xcc, 2f
+	 cmp	%g1, %g7
+	bgeu,pn	%xcc, 2f
+	 nop
+	stxa	%g0, [%l7] ASI_DMMU
+	stxa	%g0, [%l0] ASI_DTLB_DATA_ACCESS
+	membar	#Sync
+2:
+	cmp	%l0, (63 << 3)
+	blu,pt	%xcc, 1b
+	 add	%l0, (1 << 3), %l0
+
+	nop; nop; nop
+
+
+	/* PROM never puts any TLB entries into the MMU with the lock bit
+	 * set.  So we gladly use tlb entry 63 for KERNBASE. And maybe 62 too.
+	 */
+
+	sethi	%hi(KERNBASE), %g3
+	mov	(63 << 3), %g7
+	stxa	%g3, [%l7] ASI_DMMU		/* KERNBASE into TLB TAG	*/
+	stxa	%g5, [%g7] ASI_DTLB_DATA_ACCESS	/* TTE into TLB DATA		*/
+	membar	#Sync
+	stxa	%g3, [%l7] ASI_IMMU		/* KERNBASE into TLB TAG	*/
+	stxa	%g5, [%g7] ASI_ITLB_DATA_ACCESS	/* TTE into TLB DATA		*/
+	membar	#Sync
+	flush	%g3
+	membar	#Sync
+	sethi	%hi(_end), %g3			/* Check for bigkernel case */
+	or	%g3, %lo(_end), %g3
+	srl	%g3, 23, %g3			/* Check if _end > 8M */
+	brz,pt	%g3, 2f
+	 sethi	%hi(KERNBASE), %g3		/* Restore for fixup code below */
+	sethi	%hi(0x400000), %g3
+	or	%g3, %lo(0x400000), %g3
+	add	%g5, %g3, %g5			/* New tte data */
+	andn	%g5, (_PAGE_G), %g5
+	sethi	%hi(KERNBASE+0x400000), %g3
+	or	%g3, %lo(KERNBASE+0x400000), %g3
+	mov	(62 << 3), %g7
+	stxa	%g3, [%l7] ASI_DMMU
+	stxa	%g5, [%g7] ASI_DTLB_DATA_ACCESS
+	membar	#Sync
+	stxa	%g3, [%l7] ASI_IMMU
+	stxa	%g5, [%g7] ASI_ITLB_DATA_ACCESS
+	membar	#Sync
+	flush	%g3
+	membar	#Sync
+	sethi	%hi(KERNBASE), %g3		/* Restore for fixup code below */
+2:	ba,pt	%xcc, 1f
+	 nop
+1:
+	set	sun4u_init, %g2
+	jmpl    %g2 + %g0, %g0
+	 nop
+
+sun4u_init:
+	/* Set ctx 0 */
+	mov	PRIMARY_CONTEXT, %g7
+	stxa	%g0, [%g7] ASI_DMMU
+	membar	#Sync
+
+	mov	SECONDARY_CONTEXT, %g7
+	stxa	%g0, [%g7] ASI_DMMU
+	membar	#Sync
+
+	/* We are now safely (we hope) in Nucleus context (0), rewrite
+	 * the KERNBASE TTE's so they no longer have the global bit set.
+	 * Don't forget to setup TAG_ACCESS first 8-)
+	 */
+	mov	TLB_TAG_ACCESS, %g2
+	stxa	%g3, [%g2] ASI_IMMU
+	stxa	%g3, [%g2] ASI_DMMU
+	membar	#Sync
+
+	BRANCH_IF_ANY_CHEETAH(g1,g7,cheetah_tlb_fixup)
+
+	ba,pt	%xcc, spitfire_tlb_fixup
+	 nop
+
+cheetah_tlb_fixup:
+	set	(0 << 16) | (15 << 3), %g7
+	ldxa	[%g7] ASI_ITLB_DATA_ACCESS, %g0
+	ldxa	[%g7] ASI_ITLB_DATA_ACCESS, %g1
+	andn	%g1, (_PAGE_G), %g1
+	stxa	%g1, [%g7] ASI_ITLB_DATA_ACCESS
+	membar	#Sync
+
+	ldxa	[%g7] ASI_DTLB_DATA_ACCESS, %g0
+	ldxa	[%g7] ASI_DTLB_DATA_ACCESS, %g1
+	andn	%g1, (_PAGE_G), %g1
+	stxa	%g1, [%g7] ASI_DTLB_DATA_ACCESS
+	membar	#Sync
+
+	/* Kill instruction prefetch queues. */
+	flush	%g3
+	membar	#Sync
+
+	mov	2, %g2		/* Set TLB type to cheetah+. */
+	BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,g7,1f)
+
+	mov	1, %g2		/* Set TLB type to cheetah. */
+
+1:	sethi	%hi(tlb_type), %g1
+	stw	%g2, [%g1 + %lo(tlb_type)]
+
+	BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,g7,1f)
+	ba,pt	%xcc, 2f
+	 nop
+
+1:	/* Patch context register writes to support nucleus page
+	 * size correctly.
+	 */
+	call	cheetah_plus_patch_etrap
+	 nop
+	call	cheetah_plus_patch_rtrap
+	 nop
+	call	cheetah_plus_patch_fpdis
+	 nop
+	call	cheetah_plus_patch_winfixup
+	 nop
+	
+
+2:	/* Patch copy/page operations to cheetah optimized versions. */
+	call	cheetah_patch_copyops
+	 nop
+	call	cheetah_patch_cachetlbops
+	 nop
+
+	ba,pt	%xcc, tlb_fixup_done
+	 nop
+
+spitfire_tlb_fixup:
+	mov	(63 << 3), %g7
+	ldxa	[%g7] ASI_ITLB_DATA_ACCESS, %g1
+	andn	%g1, (_PAGE_G), %g1
+	stxa	%g1, [%g7] ASI_ITLB_DATA_ACCESS
+	membar	#Sync
+
+	ldxa	[%g7] ASI_DTLB_DATA_ACCESS, %g1
+	andn	%g1, (_PAGE_G), %g1
+	stxa	%g1, [%g7] ASI_DTLB_DATA_ACCESS
+	membar	#Sync
+
+	/* Kill instruction prefetch queues. */
+	flush	%g3
+	membar	#Sync
+
+	/* Set TLB type to spitfire. */
+	mov	0, %g2
+	sethi	%hi(tlb_type), %g1
+	stw	%g2, [%g1 + %lo(tlb_type)]
+
+tlb_fixup_done:
+	sethi	%hi(init_thread_union), %g6
+	or	%g6, %lo(init_thread_union), %g6
+	ldx	[%g6 + TI_TASK], %g4
+	mov	%sp, %l6
+	mov	%o4, %l7
+
+#if 0	/* We don't do it like this anymore, but for historical hack value
+	 * I leave this snippet here to show how crazy we can be sometimes. 8-)
+	 */
+
+	/* Setup "Linux Current Register", thanks Sun 8-) */
+	wr	%g0, 0x1, %pcr
+
+	/* Blackbird errata workaround.  See commentary in
+	 * smp.c:smp_percpu_timer_interrupt() for more
+	 * information.
+	 */
+	ba,pt	%xcc, 99f
+	 nop
+	.align	64
+99:	wr	%g6, %g0, %pic
+	rd	%pic, %g0
+#endif
+
+	wr	%g0, ASI_P, %asi
+	mov	1, %g1
+	sllx	%g1, THREAD_SHIFT, %g1
+	sub	%g1, (STACKFRAME_SZ + STACK_BIAS), %g1
+	add	%g6, %g1, %sp
+	mov	0, %fp
+
+	/* Set per-cpu pointer initially to zero, this makes
+	 * the boot-cpu use the in-kernel-image per-cpu areas
+	 * before setup_per_cpu_area() is invoked.
+	 */
+	clr	%g5
+
+	wrpr	%g0, 0, %wstate
+	wrpr	%g0, 0x0, %tl
+
+	/* Clear the bss */
+	sethi	%hi(__bss_start), %o0
+	or	%o0, %lo(__bss_start), %o0
+	sethi	%hi(_end), %o1
+	or	%o1, %lo(_end), %o1
+	call	__bzero
+	 sub	%o1, %o0, %o1
+
+	mov	%l6, %o1			! OpenPROM stack
+	call	prom_init
+	 mov	%l7, %o0			! OpenPROM cif handler
+
+	/* Off we go.... */
+	call	start_kernel
+	 nop
+	/* Not reached... */
+
+/* IMPORTANT NOTE: Whenever making changes here, check
+ * trampoline.S as well. -jj */
+	.globl	setup_tba
+setup_tba:	/* i0 = is_starfire */
+	save	%sp, -160, %sp
+
+	rdpr	%tba, %g7
+	sethi	%hi(prom_tba), %o1
+	or	%o1, %lo(prom_tba), %o1
+	stx	%g7, [%o1]
+
+	/* Setup "Linux" globals 8-) */
+	rdpr	%pstate, %o1
+	mov	%g6, %o2
+	wrpr	%o1, (PSTATE_AG|PSTATE_IE), %pstate
+	sethi	%hi(sparc64_ttable_tl0), %g1
+	wrpr	%g1, %tba
+	mov	%o2, %g6
+
+	/* Set up MMU globals */
+	wrpr	%o1, (PSTATE_MG|PSTATE_IE), %pstate
+
+	/* Set fixed globals used by dTLB miss handler. */
+#define KERN_HIGHBITS		((_PAGE_VALID|_PAGE_SZ4MB)^0xfffff80000000000)
+#define KERN_LOWBITS		(_PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_W)
+
+	mov	TSB_REG, %g1
+	stxa	%g0, [%g1] ASI_DMMU
+	membar	#Sync
+	stxa	%g0, [%g1] ASI_IMMU
+	membar	#Sync
+	mov	TLB_SFSR, %g1
+	sethi	%uhi(KERN_HIGHBITS), %g2
+	or	%g2, %ulo(KERN_HIGHBITS), %g2
+	sllx	%g2, 32, %g2
+	or	%g2, KERN_LOWBITS, %g2
+
+	BRANCH_IF_ANY_CHEETAH(g3,g7,cheetah_vpte_base)
+	ba,pt	%xcc, spitfire_vpte_base
+	 nop
+
+cheetah_vpte_base:
+	sethi		%uhi(VPTE_BASE_CHEETAH), %g3
+	or		%g3, %ulo(VPTE_BASE_CHEETAH), %g3
+	ba,pt		%xcc, 2f
+	 sllx		%g3, 32, %g3
+
+spitfire_vpte_base:
+	sethi		%uhi(VPTE_BASE_SPITFIRE), %g3
+	or		%g3, %ulo(VPTE_BASE_SPITFIRE), %g3
+	sllx		%g3, 32, %g3
+
+2:
+	clr	%g7
+#undef KERN_HIGHBITS
+#undef KERN_LOWBITS
+
+	/* Kill PROM timer */
+	sethi	%hi(0x80000000), %o2
+	sllx	%o2, 32, %o2
+	wr	%o2, 0, %tick_cmpr
+
+	BRANCH_IF_ANY_CHEETAH(o2,o3,1f)
+
+	ba,pt	%xcc, 2f
+	 nop
+
+	/* Disable STICK_INT interrupts. */
+1:
+	sethi	%hi(0x80000000), %o2
+	sllx	%o2, 32, %o2
+	wr	%o2, %asr25
+
+	/* Ok, we're done setting up all the state our trap mechanims needs,
+	 * now get back into normal globals and let the PROM know what is up.
+	 */
+2:
+	wrpr	%g0, %g0, %wstate
+	wrpr	%o1, PSTATE_IE, %pstate
+
+	call	init_irqwork_curcpu
+	 nop
+
+	call	prom_set_trap_table
+	 sethi	%hi(sparc64_ttable_tl0), %o0
+
+	BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g2,g3,1f)
+	ba,pt	%xcc, 2f
+	 nop
+
+1:	/* Start using proper page size encodings in ctx register.  */
+	sethi	%uhi(CTX_CHEETAH_PLUS_NUC), %g3
+	mov	PRIMARY_CONTEXT, %g1
+	sllx	%g3, 32, %g3
+	sethi	%hi(CTX_CHEETAH_PLUS_CTX0), %g2
+	or	%g3, %g2, %g3
+	stxa	%g3, [%g1] ASI_DMMU
+	membar	#Sync
+
+2:
+	rdpr	%pstate, %o1
+	or	%o1, PSTATE_IE, %o1
+	wrpr	%o1, 0, %pstate
+
+	ret
+	 restore
+
+/*
+ * The following skips make sure the trap table in ttable.S is aligned
+ * on a 32K boundary as required by the v9 specs for TBA register.
+ */
+sparc64_boot_end:
+	.skip	0x2000 + _start - sparc64_boot_end
+bootup_user_stack_end:
+	.skip	0x2000
+
+#ifdef CONFIG_SBUS
+/* This is just a hack to fool make depend config.h discovering
+   strategy: As the .S files below need config.h, but
+   make depend does not find it for them, we include config.h
+   in head.S */
+#endif
+
+! 0x0000000000408000
+
+#include "ttable.S"
+#include "systbls.S"
+
+	.align	1024
+	.globl	swapper_pg_dir
+swapper_pg_dir:
+	.word	0
+
+#include "etrap.S"
+#include "rtrap.S"
+#include "winfixup.S"
+#include "entry.S"
+
+	/* This is just anal retentiveness on my part... */
+	.align	16384
+
+	.data
+	.align	8
+	.globl	prom_tba, tlb_type
+prom_tba:	.xword	0
+tlb_type:	.word	0	/* Must NOT end up in BSS */
+	.section	".fixup",#alloc,#execinstr
+	.globl	__ret_efault
+__ret_efault:
+	ret
+	 restore %g0, -EFAULT, %o0
+