um: Switch clocksource to hrtimers

UML is using an obsolete itimer call for
all timers and "polls" for kernel space timer firing
in its userspace portion resulting in a long list
of bugs and incorrect behaviour(s). It also uses
ITIMER_VIRTUAL for its timer which results in the
timer being dependent on it running and the cpu
load.

This patch fixes this by moving to posix high resolution
timers firing off CLOCK_MONOTONIC and relaying the timer
correctly to the UML userspace.

Fixes:
 - crashes when hosts suspends/resumes
 - broken userspace timers - effecive ~40Hz instead
   of what they should be. Note - this modifies skas behavior
   by no longer setting an itimer per clone(). Timer events
   are relayed instead.
 - kernel network packet scheduling disciplines
 - tcp behaviour especially under load
 - various timer related corner cases

Finally, overall responsiveness of userspace is better.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Anton Ivanov <aivanov@brocade.com>
[rw: massaged commit message]
Signed-off-by: Richard Weinberger <richard@nod.at>

1 files changed, 10 insertions, 35 deletions

diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index d38f4952d748..b856c66ebd3a 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -1,4 +1,5 @@
 /*
+ * Copyright (C) 2015 Thomas Meyer (thomas@m3y3r.de)
  * Copyright (C) 2002- 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
  * Licensed under the GPL
  */
@@ -45,7 +46,7 @@ static int ptrace_dump_regs(int pid)
  * Signals that are OK to receive in the stub - we'll just continue it.
  * SIGWINCH will happen when UML is inside a detached screen.
  */
-#define STUB_SIG_MASK ((1 << SIGVTALRM) | (1 << SIGWINCH))
+#define STUB_SIG_MASK ((1 << SIGALRM) | (1 << SIGWINCH))
 
 /* Signals that the stub will finish with - anything else is an error */
 #define STUB_DONE_MASK (1 << SIGTRAP)
@@ -183,19 +184,13 @@ extern char __syscall_stub_start[];
 static int userspace_tramp(void *stack)
 {
 	void *addr;
-	int err, fd;
+	int fd;
 	unsigned long long offset;
 
 	ptrace(PTRACE_TRACEME, 0, 0, 0);
 
 	signal(SIGTERM, SIG_DFL);
 	signal(SIGWINCH, SIG_IGN);
-	err = set_interval();
-	if (err) {
-		printk(UM_KERN_ERR "userspace_tramp - setting timer failed, "
-		       "errno = %d\n", err);
-		exit(1);
-	}
 
 	/*
 	 * This has a pte, but it can't be mapped in with the usual
@@ -286,7 +281,7 @@ int start_userspace(unsigned long stub_stack)
 			       "errno = %d\n", errno);
 			goto out_kill;
 		}
-	} while (WIFSTOPPED(status) && (WSTOPSIG(status) == SIGVTALRM));
+	} while (WIFSTOPPED(status) && (WSTOPSIG(status) == SIGALRM));
 
 	if (!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGSTOP)) {
 		err = -EINVAL;
@@ -319,8 +314,6 @@ int start_userspace(unsigned long stub_stack)
 
 void userspace(struct uml_pt_regs *regs)
 {
-	struct itimerval timer;
-	unsigned long long nsecs, now;
 	int err, status, op, pid = userspace_pid[0];
 	/* To prevent races if using_sysemu changes under us.*/
 	int local_using_sysemu;
@@ -329,13 +322,8 @@ void userspace(struct uml_pt_regs *regs)
 	/* Handle any immediate reschedules or signals */
 	interrupt_end();
 
-	if (getitimer(ITIMER_VIRTUAL, &timer))
-		printk(UM_KERN_ERR "Failed to get itimer, errno = %d\n", errno);
-	nsecs = timer.it_value.tv_sec * UM_NSEC_PER_SEC +
-		timer.it_value.tv_usec * UM_NSEC_PER_USEC;
-	nsecs += os_nsecs();
-
 	while (1) {
+
 		/*
 		 * This can legitimately fail if the process loads a
 		 * bogus value into a segment register.  It will
@@ -405,18 +393,7 @@ void userspace(struct uml_pt_regs *regs)
 			case SIGTRAP:
 				relay_signal(SIGTRAP, (struct siginfo *)&si, regs);
 				break;
-			case SIGVTALRM:
-				now = os_nsecs();
-				if (now < nsecs)
-					break;
-				block_signals();
-				(*sig_info[sig])(sig, (struct siginfo *)&si, regs);
-				unblock_signals();
-				nsecs = timer.it_value.tv_sec *
-					UM_NSEC_PER_SEC +
-					timer.it_value.tv_usec *
-					UM_NSEC_PER_USEC;
-				nsecs += os_nsecs();
+			case SIGALRM:
 				break;
 			case SIGIO:
 			case SIGILL:
@@ -464,7 +441,6 @@ __initcall(init_thread_regs);
 
 int copy_context_skas0(unsigned long new_stack, int pid)
 {
-	struct timeval tv = { .tv_sec = 0, .tv_usec = UM_USEC_PER_SEC / UM_HZ };
 	int err;
 	unsigned long current_stack = current_stub_stack();
 	struct stub_data *data = (struct stub_data *) current_stack;
@@ -476,11 +452,10 @@ int copy_context_skas0(unsigned long new_stack, int pid)
 	 * prepare offset and fd of child's stack as argument for parent's
 	 * and child's mmap2 calls
 	 */
-	*data = ((struct stub_data) { .offset	= MMAP_OFFSET(new_offset),
-				      .fd	= new_fd,
-				      .timer    = ((struct itimerval)
-					           { .it_value = tv,
-						     .it_interval = tv }) });
+	*data = ((struct stub_data) {
+			.offset	= MMAP_OFFSET(new_offset),
+			.fd     = new_fd
+	});
 
 	err = ptrace_setregs(pid, thread_regs);
 	if (err < 0) {